The Killer Grid Heater Upgrade Kit is purpose-built to address a major flaw in the 6.7L Cummins engine that can result in total engine destruction. The problem lies in the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. This nut drops into the engine, leading to extensive damage to the piston, head, and valves. There are several solutions currently on the market addressing this issue, but they are very costly upgrades, they drastically reduce the amount of heat available to the engine and typically require tuning or don'(TM)t work well in cold climates. This kit upgrades that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater, is cost-effective, and is easy to install.

• Self-locking threads built into the lower busbar which will prevent the connection from backing out and compromising electrical connection
• Easy installation with minor modification required for 2007-2012 applications (see note in About This Product section below)
• Self Locking Threads Built Into The Lower Busbar To Prevent The Connection From Backing Out And Compromising Connection
• Eliminates both problematic nuts found in the OE grid heater by fastening directly into the lower busbar
• Kit includes replacement hardware and gaskets, along with special tools required for the job
• Kit Includes Replacement Hardware And Gaskets; Along w/Special Tools Required For The Job
• Eliminates The Problematic Grid Heater Bolt And Nut That Could Lead To Engine Damage
• Allows for full heat output with the stock intake grid heater
• Allows For Full Heat Output w/The Stock Intake Grid Heater
• Easy Installation w/No Modifications Or Tuning Required
• SEMA Certification No. SC-BDD01-0135
• Is Fully Emissions Compliant
• Fully emissions compliant
• Patent pending

This Part Fits:

BD's High RPM Mechanical Governor & Delivery Valve Kits can give you the power and torque you've been looking for. The High RPM Mechanical Governor Kit increases the Cummins engine speed to 3,000 or 4,000 rpm, reducing gear shifting and providing a new high-end horsepower levels. The Delivery Valve Kit yields optimum pump output without replacing plungers and barrels. These kits replace key components in the P7100 Bosch pump on 1994-1998 Dodge-Cummins applications and as such are not for a home install! All modifications must be done by a qualified pump technician otherwise damage could result, excessive heat/smoke could be generated and/or poor performance may occur.

• Designed and engineered to enhance the middle and high end throttle response and enable more power thru the entire throttle range
• Only trained, qualified technicians with working knowledge of P7100 pumps should perform these upgrades
• If 60lbs. Exh. V. Springs Have Not been Installed Use 1030060 Kit
• Designed/Engineered To Enhance Middle/High End Throttle Response
• Only Trained Qualified Technicians w/Working Knowledge of Pumps
• Enables More Power Thru The Entire Throttle Range
• 12 Month Or 12000 Mile Warranty
• Comes with intake valve springs

This Part Fits:

BBK Performance now offer a direct replacement fuel pump for your 1998-04 Mustang V6, GT or 1998-02 Cobra. Replace or upgrade your factory in tank electric fuel pump with this direct fit, variable flow 300lph fuel pump kit. These BBK Performance are perfect for modified applications where more fuel is required. The 300Lph fuel pump supports high horsepower but still allows for great drive ability, making it equally at home installed on a stock or highly modified Mustang. These high performance in tank fuel pumps are recommended for any high performance engine especially turbo nitrous and supercharged models. 300 LPH supports up to 800 flywheel horsepower (Naturally Aspirated)NOTE: These BBK fuel pumps are E85 compatible. When using this fuel it can and maybe harmful to OE fuel lines and other fuel system components that are not resistant to Ethanol - be sure to check and upgrade where necessary.

• Direct Fit Replacement Unit - Flows At 300 LPH Or Approximately 80 GPH Feeds Up To 800 HP
• Made In The USA

This Part Fits:

BBK Performance now offer a direct replacement fuel pump for your 1998-04 Mustang V6, GT or 1998-02 Cobra. Replace or upgrade your factory in tank electric fuel pump with this direct fit, variable flow 300lph fuel pump kit. These BBK Performance are perfect for modified applications where more fuel is required. The 300Lph fuel pump supports high horsepower but still allows for great drive ability, making it equally at home installed on a stock or highly modified Mustang. These high performance in tank fuel pumps are recommended for any high performance engine especially turbo nitrous and supercharged models. 300 LPH supports up to 800 flywheel horsepower (Naturally Aspirated)NOTE: These BBK fuel pumps are E85 compatible. When using this fuel it can and maybe harmful to OE fuel lines and other fuel system components that are not resistant to Ethanol - be sure to check and upgrade where necessary.

• Direct Fit Replacement Unit - Flows At 300 LPH Or Approximately 80 GPH Feeds Up To 800 HP
• Made In The USA

This Part Fits:

BBK billet fuel pressure regulators are a great way to tune your EFI vehicle to obtain optimum air / fuel ratios and achieve maximum horsepower with the simple adjustment screw located on top.Each BBK Performance fuel pressure regulator is made from high quality CNC Machined billet aluminum and is hand assembled and pressure tested with a precision leak free diaphragm that will allow fuel pressure adjustment to approximately 65psi.Every BBK Performance fuel pressure regulator is a direct replacements for your stock factory OEM pre set regulator and offer the best performance and value.All units have an anodized finish for great looks and long lasting finish.

• Fit Ford Fuel Injection Applications - Direct Replacement - Adjustable 0-65 PSI - Allow BBK FP Gauge To Screw In Directly
• Made In The USA

This Part Fits:

ATS Diesel 2004.5+ GM Trucks Fuel Rail Pressure Plug

This Part Fits:

This Part Fits:

The AMS EVO X Fuel Rail provides increased fuel flow which is necessary at higher boost levels. This CNC?d aluminum rail comes anodized in Red or Black and includes our signature AMS logo. With a -6AN (7.5 mm) diameter inlet and outlet it dwarfs the stock rail by over 25% in flow area. This is true bolt on part that will install with your factory fuel lines, fuel pressure regulator and will work with all factory style fuel injectors.

This Part Fits:

The AMS EVO X Fuel Rail provides increased fuel flow which is necessary at higher boost levels. This CNC?d aluminum rail comes anodized in Red or Black and includes our signature AMS logo. With a -6AN (7.5 mm) diameter inlet and outlet it dwarfs the stock rail by over 25% in flow area. This is true bolt on part that will install with your factory fuel lines, fuel pressure regulator and will work with all factory style fuel injectors.

This Part Fits:

The AMS EVO X Fuel Pressure Regulator Kit is designed for anyone running an upgraded fuel pump and or fuel injectors.

This Part Fits: