-10AN Universal High Flow Fuel Filter Replacement for Part #25-201BK

• Direct Replacement
• Easy installation
• High FLow
• 7 Micron

AEM's Universal High Flow -10 AN Inline Filter is specifically engineered for maximizing flow without sacrificing filtration, and is designed for ease of installation. The end caps are machined with -10AN female fittings that allow the filter to flow up to 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI. Machined O-ring receiver grooves on the end caps ensure against leaks, and all sealing o-rings and gaskets are made of Viton for outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels. The commonly available replacement filter cartridges filter particles as small as 7 microns. The filter's standard 2" OD allows for easy mounting virtually anywhere in the vehicle for easy access.

• Viton o-rings and gaskets ensure outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels
• Laser etched with AEM logo, flow and comes with filter replacement information
• End caps are machined with -10 AN female fittings with o-ring receiver groove
• End caps have pressure intensifiers for greater sealing of end gaskets
• Machined from 6061-T6 aluminum with a black hard anodized finish
• Flows up to 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI
• Commonly available replacement filter cartridges
• Filters particles as small as 7 microns
• 2" OD x 10" length for easy mounting

AEM's High Volume Fuel Filter is capable of supporting fuel flow for vehicles up to 500 horsepower. Double O-ring seals deliver superior leak protection and the filter's 6061 aluminum body provides excellent durability. The standard high-flow filter element is replaceable and available at most auto parts stores so you aren't stuck if you need to replace it during a race. This unit is a direct-fit replacement for most Honda/Acura applications or used as a floating application on most vehicles.

• Thread sizes for filter are 12x1.25 top and 14x1.50 bottom for fittings (universal applications)
• Uses standard high flow replacement filter (NAPA Gold Part #PN4950 or FRAM part #CH6069)
• Fits in stock Honda/Acura location or as a floating application on any vehicle
• Supports flow for racing and Motorsports vehicles up to 500 horsepower
• No additional parts required for installation (Honda/Acura Only)
• Large hexes machined into top and bottom for easy disassembly

This Part Fits:

AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and in most cases the ends of each rail are pre tapped to accept -6 AN or 9/16"x18 fittings for users who want to use custom fuel lines.

• No additional parts required for installation - installs with factory fuel line using supplied fitting
• Comprehensive installation instructions, hardware, fittings and injector O-rings included
• 1/2 inch bore dampens backpressure pulses from larger fuel injectors
• 1/8 NPT port included for nitrous pick up or fuel pressure gauge
• Complete hardware, fittings and injector O-rings included
• Works with factory fuel line or custom fuel lines
• Specifically engineered for each application
• Pre-tapped for -6 AN or 9/16"x 18 fittings
• Supports fuel flow up to 1,000 horsepower
• Black anodizing with laser engraving
• CNC Machined from billet aluminum

This Part Fits:

AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and in most cases the ends of each rail are pre tapped to accept -6 AN or 9/16"x18 fittings for users who want to use custom fuel lines.

• No additional parts required for installation - installs with factory fuel line using supplied fitting
• Comprehensive installation instructions, hardware, fittings and injector O-rings included
• 1/2 inch bore dampens backpressure pulses from larger fuel injectors
• 1/8 NPT port included for nitrous pick up or fuel pressure gauge
• Complete hardware, fittings and injector O-rings included
• Works with factory fuel line or custom fuel lines
• Specifically engineered for each application
• Pre-tapped for -6 AN or 9/16"x 18 fittings
• Supports fuel flow up to 1,000 horsepower
• Black anodizing with laser engraving
• CNC Machined from billet aluminum

This Part Fits:

AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and in most cases the ends of each rail are pre tapped to accept -6 AN or 9/16"x18 fittings for users who want to use custom fuel lines.

• No additional parts required for installation - installs with factory fuel line using supplied fitting
• Comprehensive installation instructions, hardware, fittings and injector O-rings included
• 1/2 inch bore dampens backpressure pulses from larger fuel injectors
• 1/8 NPT port included for nitrous pick up or fuel pressure gauge
• Complete hardware, fittings and injector O-rings included
• Works with factory fuel line or custom fuel lines
• Specifically engineered for each application
• Pre-tapped for -6 AN or 9/16"x 18 fittings
• Supports fuel flow up to 1,000 horsepower
• Manufactured and assembled in the USA
• Black anodizing with laser engraving
• CNC Machined from billet aluminum

This Part Fits:

AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and in most cases the ends of each rail are pre tapped to accept -6 AN or 9/16"x18 fittings for users who want to use custom fuel lines.

• No additional parts required for installation - installs with factory fuel line using supplied fitting
• Comprehensive installation instructions, hardware, fittings and injector O-rings included
• 1/2 inch bore dampens backpressure pulses from larger fuel injectors
• 1/8 NPT port included for nitrous pick up or fuel pressure gauge
• Complete hardware, fittings and injector O-rings included
• Works with factory fuel line or custom fuel lines
• Specifically engineered for each application
• Pre-tapped for -6 AN or 9/16"x 18 fittings
• Supports fuel flow up to 1,000 horsepower
• Manufactured and assembled in the USA
• Black anodizing with laser engraving
• CNC Machined from billet aluminum

This Part Fits:

AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and in most cases the ends of each rail are pre tapped to accept -6 AN or 9/16"x18 fittings for users who want to use custom fuel lines.

• No additional parts required for installation - installs with factory fuel line using supplied fitting
• Comprehensive installation instructions, hardware, fittings and injector O-rings included
• 1/2 inch bore dampens backpressure pulses from larger fuel injectors
• 1/8 NPT port included for nitrous pick up or fuel pressure gauge
• Complete hardware, fittings and injector O-rings included
• Works with factory fuel line or custom fuel lines
• Specifically engineered for each application
• Pre-tapped for -6 AN or 9/16"x 18 fittings
• Supports fuel flow up to 1,000 horsepower
• Manufactured and assembled in the USA
• Black anodizing with laser engraving
• CNC Machined from billet aluminum

This Part Fits:

This Part Fits:

PROGUARD Fuel Filters deliver increased flow and efficiency that are demanded in the Diesel environment. This fuel filter is designed for maximum filtration and minimal flow restriction. The PROGUARD Fuel Filters are direct OE replacement filters to ensure a proper fit and hassle-free installation.

• Direct stock replacement for easy installation
• High flow rates and outstanding filtration

This Part Fits:

PROGUARD Fuel Filters deliver increased flow and efficiency that are demanded in the Diesel environment. This fuel filter is designed for maximum filtration and minimal flow restriction. The PROGUARD Fuel Filters are direct OE replacements filters which utilize the factory canisters to ensure a proper fit and hassle free installation.

• Direct Stock Replacement For Easy Installation
• High Flow Rates And Outstanding Filtration

This Part Fits:

PROGUARD Fuel Filters deliver increased flow and efficiency that are demanded in the Diesel environment. This fuel filter is designed for maximum filtration and minimal flow restriction. The PROGUARD Fuel Filters are direct OE replacements filters which utilize the factory canisters to ensure a proper fit and hassle free installation.

• Direct Stock Replacement For Easy Installation
• High Flow Rates And Outstanding Filtration

This Part Fits:

PROGUARD Fuel Filters deliver increased flow and efficiency that are demanded in the Diesel environment. This fuel filter is designed for maximum filtration and minimal flow restriction. The PROGUARD Fuel Filters are direct OE replacements filters which utilize the factory canisters to ensure a proper fit and hassle free installation.

• Direct Stock Replacement For Easy Installation
• High Flow Rates And Outstanding Filtration
• 2 Filter Set

This Part Fits:

PROGUARD Fuel Filters deliver increased flow and efficiency that are demanded in the Diesel environment. This fuel filter is designed for maximum filtration and minimal flow restriction. The PROGUARD Fuel Filters are direct OE replacements filters which utilize the factory canisters to ensure a proper fit and hassle free installation.

• High Flow Rate For Maximum Protection
• Heavy Duty Construction For Strength
• Maximum Filtration w/Maximum Flow
• Constructed For Easy Installation
• 90 Day Limited Warranty

This Part Fits:

PROGUARD Fuel Filters deliver increased flow and efficiency that are demanded in the Diesel environment. This fuel filter is designed for maximum filtration and minimal flow restriction. The PROGUARD Fuel Filters are direct OE replacement filters to ensure a proper fit and hassle free installation.

• High Flow Rate For Maximum Protection
• Heavy Duty Construction For Strength
• Maximum Filtration w/Maximum Flow
• Constructed For Easy Installation

This Part Fits:

PROGUARD Fuel Filters deliver increased flow and efficiency that are demanded in a Diesel environment. These filters use an exclusive NF21 synthetic media for maximum filtration and minimal flow restriction. aFe PROGUARD fuel filters have up to a 99 filter efficiency for maximum protection.

• High Flow Rate For Maximum Protection
• Heavy Duty Construction For Strength
• Maximum Filtration w/Maximum Flow
• Constructed For Easy Installation
• 90 Day Limited Warranty

This Part Fits: