Fits 2014-2021 Ram 2500 4WD (including Tradesman, Big Horn, Laramie, Limited, and SLT models).

The ICON K212511 Stage 1 Suspension System is engineered to improve the ride quality and handling of 4WD Ram 2500 trucks with a 2.5-inch front lift. This system features dual-rate front coil springs designed to provide a soft initial rate for highway comfort and a firmer second rate for better bottoming resistance during off-road use. To manage suspension travel, the kit includes ICON 2.0 Aluminum Series front and rear shocks, precision-tuned specifically for this platform.

This bolt-on system is an ideal solution for owners who use their trucks for towing, construction site work, or weekend off-road adventures. It is designed to maintain a smooth highway feel while significantly improving performance on rougher terrains. The kit includes all necessary bracketry and hardware, and it requires no driveshaft modifications for a clean installation.

• 2.5-inch lift height for increased ground clearance
• Dual-rate front coil springs for optimal ride and performance
• ICON 2.0 Aluminum Series front and rear shocks
• Corrosion-resistant aluminum shock bodies
• All necessary installation hardware and brackets included
• Bolt-on design with no driveshaft modifications required
• MPN: K212511

Fits 2003-2013 Dodge/Ram 2500 and 3500 4WD trucks, including Laramie, SLT, ST, and Big Horn models.

The ICON Vehicle Dynamics Stage 2 Suspension System is a comprehensive performance upgrade designed to level the stance of your heavy-duty Ram while significantly enhancing ride quality on and off-road. This system replaces the factory front suspension with ICON-engineered dual-rate coil springs and match-tuned 2.0 Aluminum Series remote reservoir shocks. The remote reservoirs increase oil capacity to dissipate heat more effectively, ensuring consistent damping performance and preventing shock fade during extended use on rough terrain or while towing.

To maintain proper suspension geometry, this kit includes a bearing-style adjustable track bar equipped with PTFE-lined FK rod ends. This allows for precise centering of the front axle under the chassis and eliminates the deflection found in factory rubber bushings for improved steering rigidity. This system is a complete bolt-on solution that requires no driveshaft modifications, making it an ideal choice for work sites, dirt roads, and highway driving.

• Manufacturer Part Number: K212502
• 2.5-inch lift height levels the vehicle front-to-rear
• ICON 2.0 Aluminum Series remote reservoir shocks for superior cooling and damping
• Dual-rate coil springs optimized for Ram 2500/3500 weight and travel
• Adjustable track bar with FK bearings for precise axle alignment
• Includes polyurethane bumpstops and sway bar components
• No driveshaft modifications required for installation
• Increased wheel travel and improved body roll control over stock

Fits 2003-2013 Dodge Ram 2500 and 2003-2012 Dodge Ram 3500 4WD trucks.

The ICON Vehicle Dynamics Stage 1 Suspension System (MPN K212501) is an entry-level solution designed to level the stance of 2003-2013 heavy-duty Ram trucks while significantly enhancing ride quality on the highway and over rough terrain. This 2.5-inch lift system increases front-end wheel travel and reduces body roll without requiring driveshaft modifications or compromising the vehicle's factory towing capacity.

• Dual Rate Coil Springs: ICON-engineered springs provide a soft initial rate for daily driving comfort and a firmer second rate to handle large impacts and maintain control.
• ICON 2.0 Aluminum Series Shocks: Features match-tuned internal reservoir shocks with a clear anodized finish for corrosion resistance and consistent damping performance.
• Complete Hardware Kit: Includes polyurethane bumpstops and sway bar drop brackets to ensure proper suspension geometry and clearance.
• Bolt-On Installation: Designed to install into factory mounting locations for a straightforward upgrade.

System Components: Dual rate coil springs, polyurethane bumpstops, sway bar drop brackets, and ICON 2.0 Aluminum Series shocks.

Fits 2021-2025 Ford F-150 Raptor. Designed specifically for the Gen3 platform, this ICON Vehicle Dynamics coil spring kit levels your truck's stance while maintaining the full functionality of the factory electronic shock systems. These linear rate springs install directly onto the original equipment front shock absorbers, providing a 2.25-inch lift height over stock on the standard Raptor or 2 inches of front lift on the Raptor R.

Engineering for off-road durability, these springs feature a dual-stage powder coating for superior corrosion resistance in harsh environments. The direct bolt-on installation requires no cutting or modifications to the vehicle's factory suspension components. This kit is compatible with all versions of OE coilovers available for the Gen3 Raptor.

• Fits 2021-2025 Ford F-150 Raptor models
• Provides 2.25" lift (Raptor) or 2" lift (Raptor R)
• Maintains factory electronic shock (Live Valve) functionality
• Linear rate coil design for consistent performance
• Dual-stage powder coating for maximum corrosion resistance
• Direct bolt-on installation; no cutting required
• Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 95232

Fits 2021-2025 Ford F-150 Raptor models. The ICON Triple Rate rear coil spring kit (MPN 95231) is engineered specifically for Gen3 Raptors that carry extra weight from bed racks, rooftop tents, or recovery gear. These springs are designed to provide a 1-inch rear lift height over stock when the vehicle is equipped with approximately 300 lbs of additional cargo, restoring lost ride height and improving bottom-out resistance.

Constructed with a unique tapered wire design, these springs feature three distinct rates to optimize performance across the entire range of travel. The extra-soft initial rate allows for up to 17 inches of droop travel while ensuring the springs stay seated in the factory coil buckets. A secondary performance rate provides a compliant and comfortable ride on the street, while the overload rate engages during heavy compression to manage high-speed impacts and heavy loads.

• Fits 2021-2025 Ford F-150 Raptor
• Provides 1-inch rear lift with approximately 300 lbs of additional cargo weight
• Triple-rate design for optimized comfort, control, and load management
• Maintains spring seat contact for up to 17 inches of droop travel
• Tapered wire construction for maximum efficiency and travel
• Dual-stage powder coating for superior corrosion resistance
• Lifetime guarantee against sagging and breakage
• Manufacturer Part Number: 95231

Fits 2021-2025 Ford F-150 Raptor models. This ICON Triple Rate rear coil spring kit provides a 1-inch increase in rear ride height on stock-weight Gen3 Raptors, delivering a more aggressive stance and additional clearance for larger wheel and tire combinations.

Engineered specifically for the Raptor's five-link rear suspension, these springs utilize a triple-rate design to balance comfort and performance. The extra-soft initial rate allows for maximum droop travel, while the performance ride rate ensures on-road compliance. An overload rate provides necessary resistance against bottoming out during heavy off-road use or when carrying gear. The unique tapered wire design optimizes travel efficiency, and an extra-long free height keeps the coils securely seated in their buckets for up to 17 inches of droop travel.

• Manufacturer Part Number: 95230
• Nets 1 inch of rear lift over stock on Raptors without additional rear weight
• Triple-rate design: Initial (droop), Ride (comfort), and Overload (bottom-out resistance)
• Tapered wire design for maximum travel and efficiency
• Extra-long free height ensures coils stay seated during 17 inches of wheel travel
• Dual-stage powder coating for superior corrosion resistance
• Lifetime guarantee against sagging or breakage

Fits 2005-2025 Ford F-250 and F-350 Super Duty models (XL, XLT, Lariat, King Ranch, Platinum, Limited, and specialized trims).

The ICON Vehicle Dynamics Front Coil Spring Kit provides 7 inches of lift height for the Ford Super Duty platform. These springs are engineered with a dual-rate design to balance on-road comfort with off-road capability. The initial rate is tuned soft for smooth street driving, while the secondary rate increases during compression to provide superior bottoming resistance and handling stability when navigating rough terrain.

Built to withstand heavy-duty use, these coil springs are finished in a dual-stage, semi-gloss black powder coat for maximum corrosion resistance in harsh environments. This kit is a 100% bolt-on solution that facilitates the fitment of larger tires and increased wheel travel when paired with ICON shocks.

• Part Number: 67015
• Lift Height: 7 inches
• Design: Dual-rate for optimized ride quality and compression control
• Finish: Semi-gloss black powder coat
• Installation: 100% bolt-on application
• Warranty: Lifetime guarantee against sagging or breakage

Fits select 2023-2025 Ford F-250 and F-350 Super Duty models equipped with diesel engines.

The ICON Vehicle Dynamics 4.5-inch front coil spring kit is engineered specifically for the heavy front-end load of diesel-equipped Super Duty trucks. These springs provide a significant 4.5-inch lift height, allowing for larger wheel and tire fitment while increasing front-end travel when paired with ICON shocks. The dual-rate design addresses the common compromise between comfort and performance: the softer initial rate handles small road chop for smooth highway driving, while the firmer secondary rate engages during compression to prevent bottoming out during off-road use.

Constructed with durability in mind, these springs are finished in a dual-stage semi-gloss powder coat for superior resistance to corrosion and road salt. The 100% bolt-on design allows for a straightforward installation that replaces the factory coil springs. Each kit is backed by a lifetime guarantee against sagging or breakage.

• Fits 2023-2025 Ford F-250/F-350 Super Duty (Diesel)
• Lift Height: 4.5 inches over stock
• Dual-rate spring design for optimized on- and off-road performance
• Dual-stage semi-gloss powder coat finish
• 100% bolt-on installation
• Lifetime warranty against sagging or breakage
• Manufacturer Part Number: 64012

Fits 2020-2022 Ford F-250 and F-350 Super Duty models (XL, XLT, Lariat, King Ranch, Platinum, Limited).

Engineered for drivers who demand superior ride quality and increased off-road capability, the ICON Vehicle Dynamics 4.5" coil spring kit provides the necessary lift to clear larger tires and improve the stance of your 2020-2022 Ford Super Duty. These springs utilize a dual rate design, offering a softer initial rate for smooth on-road comfort and a firmer secondary rate that provides excellent bottoming resistance during aggressive off-road use or heavy compression.

These springs are designed to be a direct replacement for the factory units and, when paired with ICON shocks, allow for increased wheel travel. Each spring is finished in a dual-stage, semi-gloss black powder coat for maximum corrosion resistance and durability in harsh environments.

• 4.5" lift height for increased ground clearance and larger tire fitment
• Dual rate design improves both on-road comfort and off-road stability
• Dual-stage, semi-gloss powder coat offers superior corrosion resistance
• 100% bolt-on installation replaces factory coil springs
• Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 64011

Fits 2005-2021 Ford F-250 and F-350 Super Duty (all trims).

ICON Vehicle Dynamics dual-rate coil springs are engineered for drivers who demand superior ride quality and increased performance. The dual-rate design provides a softer initial rate for excellent on-road comfort, which transitions to a firmer secondary rate during suspension compression. This transition delivers the bottoming resistance and stability required for aggressive off-road use and larger tire fitment.

Manufactured to strict tolerances, these springs are finished with a dual-stage semi-gloss powder coat to ensure long-term corrosion resistance in harsh environments. When used in conjunction with ICON shocks, this kit allows for increased wheel travel over stock configurations.

• Lift Height: 4.5 inches
• Dual-rate design optimizes both street comfort and off-road bottoming resistance
• Dual-stage semi-gloss powder coat finish for superior corrosion protection
• 100% bolt-on installation into factory spring buckets
• Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 64010

Fits 2023 Ford F-250 and F-350 Super Duty (Gas engines).

The ICON Vehicle Dynamics 2.5" coil spring kit is engineered for Ford Super Duty owners seeking improved ride quality and increased wheel travel without sacrificing on-road comfort. This system provides 2.5 inches of front lift height, creating clearance for larger tire packages and offering a significant performance upgrade over factory springs.

These springs utilize a dual-rate design specifically tuned for gasoline-equipped trucks. The initial rate is softer to absorb small road chatter and deliver a smooth highway ride, while the firmer secondary rate provides excellent bottoming resistance during more aggressive off-road use. To maintain drivability and tire wear, ICON includes a set of caster correction cams to ensure the front end remains within proper alignment specifications at the new ride height.

• Lift Height: 2.5 inches
• Spring Design: Dual-rate coils optimized for gas engines
• Finish: Dual-stage, semi-gloss black powder coat for superior corrosion resistance
• Installation: 100% bolt-on; no cutting or welding required
• Correction Hardware: Caster alignment cams included
• Warranty: Lifetime guarantee against sagging or breakage
• MPN: 62513

Fits 2023 Ford F-250 and F-350 Super Duty diesel trucks. This ICON Vehicle Dynamics front spring kit is engineered for drivers who demand superior ride quality and increased wheel travel on and off-road. These diesel-specific coil springs provide 2.5 inches of lift, allowing for the fitment of larger wheel and tire combinations while improving overall suspension performance.

The dual rate design features a softer initial rate for excellent on-road comfort and a firmer secondary rate that increases during compression to provide bottoming resistance and stability during off-road use. This kit includes caster correction cams to maintain proper alignment geometry at the new ride height. Each spring is finished in a dual-stage, semi-gloss powder coat for maximum corrosion resistance and is backed by a lifetime warranty against sagging or breakage.

• Part Number: 62512
• Lift Height: 2.5 inches
• Dual rate design optimized for diesel engines
• Includes caster correction cam kit for proper alignment
• 100% bolt-on installation
• Dual-stage semi-gloss powder coat finish
• Lifetime warranty against sagging and breakage

Fits 2020-2022 Ford F-250 and F-350 Super Duty (all trim levels).

The ICON Vehicle Dynamics Front 2.5" Dual Rate Spring Kit is engineered to provide your Super Duty with increased lift height and superior ride quality. By utilizing a dual-rate design, these springs offer a softer initial rate for smooth on-road handling and a firmer secondary rate that provides excellent bottoming resistance and stability during off-road compression. When paired with ICON shocks, this system allows for increased wheel travel and clearance for larger tire fitment.

This kit includes caster correction cams to maintain proper alignment geometry at the new ride height, ensuring your truck retains its factory steering feel and tire wear characteristics. Finished in a dual-stage semi-gloss black powder coat, these springs are built to withstand harsh environments while resisting corrosion.

• Lift Height: 2.5 inches
• Spring Design: Dual-rate for optimized on and off-road performance
• Hardware Included: Alignment-correcting caster cams
• Finish: Dual-stage semi-gloss black powder coat
• Installation: 100% bolt-on; no cutting or welding required
• Warranty: Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 62511

Fits 2005-2021 Ford F-250 and F-350 Super Duty (XL, XLT, Lariat, King Ranch, Platinum, Limited, and Cabela's editions).

ICON Vehicle Dynamics 2.5-inch dual-rate coil springs are engineered to provide a significant upgrade in ride quality and suspension performance for Ford Super Duty trucks. This kit delivers 2.5 inches of front lift height, allowing for the fitment of larger wheel and tire combinations. The dual-rate design utilizes a softer initial spring rate for superior on-road comfort and small-bump compliance, while a firmer secondary rate provides excellent bottoming resistance during off-road use or heavy compression.

To maintain proper front-end geometry at the new ride height, this kit includes a set of caster correction cams. The springs are finished in a dual-stage, semi-gloss black powder coat for maximum corrosion resistance and durability in harsh environments.

• 2.5-inch front lift height for improved ground clearance and tire fitment
• Dual-rate coil design balances street comfort with off-road control
• Includes caster correction cams to ensure proper alignment geometry
• Dual-stage semi-gloss powder coat offers excellent salt and corrosion resistance
• 100% bolt-on installation requires no cutting or welding
• Manufacturer Part Number: 62510
• ICON Lifetime Warranty against sagging and breakage

Fits 1996-2002 Toyota 4Runner (Base, Limited, and SR5).

This ICON Vehicle Dynamics rear coil spring kit provides 1 inch of additional lift height, allowing for increased tire clearance and a leveled stance. These single-rate springs are engineered with a slightly higher spring rate than factory coils to better handle cargo loads and off-road gear without sacrificing ride quality. For optimal performance and suspension travel, these coils are designed to work in conjunction with ICON 2.0 Aluminum Series or 2.5 Series rear shocks.

• Provides 1 inch of rear lift over stock height
• Single-rate coil design ensures consistent handling and exceptional ride quality
• Increased spring rate improves load-bearing capacity for overlanding and towing
• Dual-stage powder coat finish for maximum corrosion resistance
• ICON engineered coils are guaranteed for life against sagging or breaking
• Manufacturer Part Number: 53015

Fits 1991-1997 Toyota Land Cruiser Base.

This ICON Vehicle Dynamics Rear Dual Rate Spring Kit is engineered to enhance the ride quality and load-carrying capacity of the 80 Series Toyota Land Cruiser. These 3-inch lift springs utilize a dual-rate design, providing a plush initial rate for small-bump compliance and a firmer secondary rate to support heavy gear and provide bottoming resistance during off-road use.

Because these springs are designed for typical 80 Series builds, the 3-inch lift height accounts for the added weight of common accessories such as aftermarket rear bumpers and oversized spare tires. Please note that installation on a vehicle with stock weight may result in a lift height slightly higher than advertised.

• Fits 1991-1997 Toyota Land Cruiser (80 Series)
• Provides 3 inches of rear lift
• Dual-rate coil design for optimal on-road comfort and off-road control
• Engineered for vehicles with additional accessory weight
• Manufacturer Part Number: 53006

Fits 1991-1997 Toyota Land Cruiser (Base).

The ICON Vehicle Dynamics 53005 front spring kit provides a 3-inch lift for the 80 Series Land Cruiser, utilizing a dual-rate design to balance on-road comfort with off-road capability. The softer initial rate handles minor road chatter and small bumps, while the firmer secondary rate provides the necessary support for heavy articulation and bottom-out resistance during aggressive off-road use.

Tech Note: These advertised lift heights are based on typical 80 Series builds equipped with accessories such as heavy front bumpers and winches. Actual lift height may be higher than 3 inches if installed on a vehicle with stock weight.

• Manufacturer Part Number: 53005
• Lift Height: 3.0 inches
• Spring Type: Dual Rate Coil
• Fitment: 80 Series Toyota Land Cruiser
• Position: Front

Fits select 2003-2024 Toyota 4Runner, 2007-2014 FJ Cruiser, and 2003-2023 Lexus GX460 and GX470.

The ICON Vehicle Dynamics Overland Series Rear Coil Spring Kit is engineered specifically for expedition-style vehicles carrying significant additional weight from bumpers, winches, roof-top tents, and recovery gear. These dual-rate springs provide a compliant ride on the street while maintaining the necessary bottom-out resistance for high-speed off-road use and heavy cargo situations.

When the vehicle is unloaded, these springs provide a 3-inch lift height; when loaded with typical overlanding equipment, they provide a 2-inch lift to maintain a level stance. Manufactured by Eibach to ICON's exact specifications, these coils are shot-peened and preset to ensure long-term durability and resistance to sagging under load.

• Fits 2003-2024 Toyota 4Runner, 2007-2014 FJ Cruiser, 2010-2023 Lexus GX460, and 2003-2009 Lexus GX470
• Delivers 3" of rear lift (unloaded) or 2" of rear lift (loaded)
• Dual-rate design improves ride quality and reduces bottoming out
• Manufactured by Eibach for ICON Vehicle Dynamics
• Direct-fit replacement for factory rear coil springs
• Lifetime guarantee against sagging or breaking
• Manufacturer Part Number: 52800

Fits 2024-2025 Lexus GX550 and Toyota Land Cruiser 250 Series models.

ICON dual-rate rear coil springs are engineered to provide 2 inches of rear lift height over stock while significantly enhancing handling dynamics for both daily driving and technical off-road use. The dual-rate architecture utilizes a softer initial rate for on-road ride quality and a firmer secondary overload rate that engages during suspension compression to provide superior bottoming resistance and stability under load.

Every spring is manufactured to strict tolerances and finished in a durable semi-gloss black powder coat for long-term corrosion resistance. These springs are designed to integrate seamlessly with ICON shocks and suspension components to maximize wheel travel and damping performance.

• Provides 2 inches of rear lift over factory height
• Dual-rate design for optimized comfort and off-road bottoming resistance
• Vehicle-specific tuning for the 2024-2025 GX550 and Land Cruiser 250
• Semi-gloss black powder coat finish
• Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 52752

Fits 2008-2021 Toyota Land Cruiser (Base and Heritage Edition).

This ICON 1.75-inch Dual Rate Rear Spring Kit is engineered to provide increased ground clearance while significantly improving the ride quality and handling of your 200-series Land Cruiser. The dual-rate design features a softer initial spring rate for compliant on-road comfort and a firmer secondary rate that engages as the suspension compresses, providing superior bottom-out resistance and stability when fully loaded or navigating technical terrain.

• 1.75-inch rear lift height for improved stance and clearance
• Dual-rate coil architecture optimizes performance across varied terrain
• Integrated rubber dampers reduce rate crossover noise and "coil slap"
• Includes 10mm urethane spacer to correct common vehicle lean
• Direct-fit replacement for OE rear springs
• Manufacturer Part Number: 52750

Fits select 2003-2024 Toyota 4Runner, 2007-2014 Toyota FJ Cruiser, and 2003-2023 Lexus GX460/GX470.

This ICON Vehicle Dynamics rear coil spring kit provides 2 inches of lift, allowing for increased ground clearance and room for larger tire fitments. Unlike progressive springs that change rate under compression, these linear-rate coils offer consistent, predictable handling characteristics across their entire stroke. The slightly increased spring rate over the OE equipment improves the vehicle's load-bearing capacity, making it an ideal upgrade for vehicles equipped with rear bumpers, racks, or heavy gear.

For maximum damping performance, these springs are designed to work in conjunction with ICON 2.0 Aluminum Series or 2.5 Series rear shocks. The dual-stage powder coat finish provides superior protection against road salt and debris, ensuring long-term corrosion resistance in harsh environments.

• Manufacturer Part Number: 52700
• Lift Height: 2 inches
• Spring Rate: Linear
• Finish: Dual-stage powder coat
• Guaranteed against sagging and breaking for life
• Direct replacement for factory rear coil springs

Fits 2023-2025 Toyota Sequoia (SR5, Limited, Platinum, Capstone, 1794 Edition, and TRD Pro).

ICON Vehicle Dynamics dual-rate rear coil springs are engineered to increase rear ride height while significantly improving suspension performance for the third-generation Toyota Sequoia. These springs utilize a dual-rate design: a softer initial rate provides excellent on-road comfort, while a firmer secondary rate offers increased bottoming resistance and stability when the suspension is compressed during off-road use or when hauling gear.

The lift height achieved depends on the vehicle’s factory trim level. On Sequoia TRD Pro and submodels equipped with the TRD Off-Road package, these springs provide 2 inches of rear lift. On non-TRD equipped submodels, they yield 4 inches of rear lift. For maximum performance, ICON recommends pairing these coils with ICON shock absorbers and supporting suspension components.

• Direct replacement for OE rear coil springs
• Dual-rate coil design for balanced on- and off-road performance
• Provides 2-inch lift for TRD Pro and TRD Off-Road models
• Provides 4-inch lift for non-TRD submodels
• Dual-stage powder coating for maximum corrosion resistance
• Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 51216

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models.

The ICON Vehicle Dynamics 51215 Overland Series rear coil springs are engineered to address the common sagging issues found on 2024-2025 Toyota Tacoma builds outfitted with heavy gear. These dual-rate springs are specifically designed to net 0.5 inches of rear lift height when the vehicle is carrying approximately 600 lbs of constant additional weight, such as bed racks, rooftop tents, or steel bumpers. By replacing the OE springs with this kit, you restore lost ride height and significantly improve both on-road stability and off-road bottoming resistance.

The dual-rate design features a softer initial rate to maintain a compliant ride during daily driving, while the firmer secondary rate provides the necessary support for heavy loads and aggressive trail use. For maximum durability, each spring receives a dual-stage powder coating to resist corrosion in harsh environments. These springs are backed by a lifetime guarantee against sagging and breakage.

• Provides 0.5" of rear lift over stock with 600 lbs of additional weight
• Dual-rate design balances on-road comfort with off-road load support
• Dual-stage powder coating for superior corrosion resistance
• Direct-fit replacement into factory spring buckets
• Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 51215

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models.

The ICON Triple Rate rear coil spring kit (MPN 51213) provides a 0.5-inch lift for the 2024-2025 Toyota Tacoma, delivering a significant upgrade in suspension dynamics. Engineered with three distinct spring rates—droop, ride, and overload—these coils provide a soft, compliant ride on the street while maintaining the firmness necessary to prevent bottoming out during aggressive off-road use or when carrying heavy loads. This triple-rate design ensures the suspension remains active and controlled through the entire range of travel.

Constructed for longevity, these coils feature a dual-stage powder coating that provides a durable barrier against corrosion and road debris. Like all ICON coil springs, they are backed by a lifetime guarantee against sagging or breakage, ensuring consistent ride height and performance for the life of the vehicle.

• Triple-rate design for optimized droop, ride, and overload performance
• 0.5-inch rear lift height over factory specifications
• Dual-stage powder coating for superior corrosion resistance
• Significant improvement in bottoming resistance and off-road control
• Lifetime guarantee against sagging and breakage
• Manufacturer Part Number: 51213

Vehicle Fitment

Fits 2023-2025 Toyota Sequoia 1794 Edition, Capstone, Limited, Platinum, SR5, and TRD Pro.

ICON Dual Rate rear coil springs for the 2023-2025 Toyota Sequoia provide a 2-inch rear lift height increase over stock while significantly enhancing both on- and off-road performance. Engineered for drivers who demand versatility, the dual-rate coil design offers a soft initial rate for a comfortable street ride and a firmer secondary rate to provide excellent bottoming resistance and stability during off-road use or when carrying heavy loads.

These springs are vehicle-specific and designed to integrate perfectly with ICON shocks and suspension components. To ensure long-term durability in harsh environments, each spring features a dual-stage powder coating for superior corrosion resistance.

• Provides 2 inches of rear lift height over factory specifications
• Dual-rate coil design delivers a plush ride with firm overload support
• Significantly improves handling and bottoming resistance on all terrains
• Dual-stage powder coating for maximum protection against the elements
• Lifetime guarantee against sagging or breakage
• Direct fit for 2023-2025 Toyota Sequoia models
• Manufacturer Part Number: 51212

Fits 2022-2025 Toyota Tundra models (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone).

This ICON Vehicle Dynamics rear coil spring kit is engineered to provide a modest increase in ground clearance while significantly improving both on-road comfort and off-road capability. The specialized triple-rate design features distinct spring rates for droop, ride, and overload. This allows for a compliant, soft ride during daily driving while providing a firmer rate at the end of the stroke for excellent bottoming resistance and stability when the vehicle is loaded or navigating technical terrain.

These springs are designed to yield 1.25 inches of rear lift on non-TRD models and 0.75 inches of lift on Tundra models equipped with the TRD suspension package. Each spring is finished in a dual-stage powder coating for maximum corrosion resistance and is backed by a lifetime guarantee against sagging or breakage.

• Fits 2022-2025 Toyota Tundra models
• Yields 1.25" rear lift on non-TRD models; 0.75" lift on TRD models
• Triple-rate coil design for optimized ride quality and bottoming resistance
• Dual-stage powder coating for superior corrosion protection
• Direct replacement for factory rear coil springs
• Manufacturer Part Number: 51211
• Lifetime guarantee against sagging and breakage

Fits 2022-2025 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro).

Improve your truck's stance and suspension performance with the ICON Triple Rate rear coil spring kit. Designed specifically for the 2022-2025 Toyota Tundra, these springs provide a modest .5-inch increase in rear lift height on non-TRD models. For Tundras equipped with the TRD Suspension Package, these springs maintain the factory ride height while significantly enhancing on-road comfort and off-road bottoming resistance.

The triple-rate design utilizes three distinct spring rates: a soft droop rate for maximum wheel travel, a balanced ride rate for daily driving comfort, and a firmer overload rate to handle heavy loads and prevent bottom-out during aggressive off-road use. Each spring is finished with a dual-stage powder coating for superior corrosion resistance and long-term durability in harsh environments.

• Fits 2022-2025 Toyota Tundra models
• Nets .5-inch lift on non-TRD models; nets 0-inch lift on TRD package models
• Triple-rate design optimizes droop, ride, and overload performance
• Dual-stage powder coat finish for maximum corrosion resistance
• Manufacturer Part Number: 51210
• Lifetime guarantee against sagging or breakage

Fits 2022-2024 Toyota Tundra (1794 Edition, Capstone, Limited, Platinum, SR, SR5, and TRD Pro).

ICON Triple Rate rear coil springs are engineered to provide increased ground clearance and significant ride quality improvements for the 2022-2024 Toyota Tundra. Designed as a critical component of ICON’s 6-inch Lift Performance Suspension System, these springs feature a sophisticated triple-rate design. This engineering delivers a soft droop and ride rate for smooth on-road handling, while the firmer overload rate ensures excellent bottoming resistance and stability during off-road use or when carrying heavy loads.

This kit is specifically calibrated to yield 3 inches of rear lift on Tundra models equipped with the TRD Suspension Package and 3.5 inches of rear lift on non-TRD models. Each spring is finished with a dual-stage powder coating for maximum corrosion resistance in harsh environments. ICON coil springs are manufactured to the highest tolerances and include a lifetime guarantee against sagging or breakage.

• Triple-rate design with ICON-engineered droop, ride, and overload rates
• Nets 3.5" of lift on non-TRD models / 3" of lift on TRD models
• Dual-stage powder coating for superior corrosion protection
• Enhances on-road comfort and off-road bottoming resistance
• Designed for use with ICON 6" Lift Performance Suspension Systems
• Manufacturer Part Number: 51013
• Lifetime guarantee against sagging and breakage

Fits 2020-2022 Jeep Gladiator (JT) models including Rubicon, Mojave, Overland, and Sport.

The ICON Vehicle Dynamics rear coil spring kit for the Jeep Gladiator JT provides a 1.5-inch lift height while significantly improving ride quality through a specialized triple-rate design. Unlike standard linear springs, these ICON-engineered coils feature distinct droop, ride, and overload rates. This configuration ensures consistent on-road comfort at ride height, an ultra-soft droop rate for maximum articulation at full extension, and a firm overload rate to increase bottoming resistance during aggressive off-road use or when carrying heavy loads.

Built for durability, these springs are ICON 1K tested under extreme conditions and finished with a dual-stage powder coating for superior corrosion resistance. When paired with ICON shocks, these springs enable a 23% increase in rear wheel travel compared to factory components.

• Lift Height: 1.5" over stock
• Spring Design: Triple-rate (Droop, Ride, and Overload rates)
• Travel: 23% increase in rear wheel travel when paired with ICON shocks
• Construction: Shot-peened and preset to prevent sagging
• Finish: Dual-stage powder coating
• MPN: 22066
• Warranty: Lifetime guarantee against sagging or breakage

Fits select 2018-2023 Jeep Wrangler JL and Wrangler Unlimited models, including Rubicon, Sahara, and Sport trims.

The ICON Vehicle Dynamics 2.5" rear coil springs are engineered for drivers who require a balance of on-road refinement and off-road capability. This dual-rate design features a soft initial rate for compliant highway cruising and a firmer secondary rate that engages during compression to provide superior bottoming resistance on the trail. When paired with ICON shocks, these springs offer a 2" increase in rear wheel travel and provide enough clearance for 35" tires.

Constructed for longevity, these springs undergo rigorous "ICON 1K" testing to ensure they maintain their height and performance under extreme conditions. This 100% bolt-on kit includes necessary hardware for a complete rear suspension upgrade.

• Provides 2.5" of lift (based on 4-door Rubicon JL)
• Dual-rate design for improved ride quality and off-road control
• Clears 35" tires (37" with optional bump stop spacer kit PN: 22029)
• Includes extended sway bar links and bump stop spacers
• Lifetime guarantee against sagging or breakage
• 100% bolt-on installation
• Manufacturer Part Number: 22026