ICON Dual Rate rear coil springs for 2023-2025 Sequoia provide 2" of rear lift height over stock as well as greatly enhancing on- and off-road performance, especially when used with ICON shocks and suspension components. The dual-rate coil design provides a softer ride rate with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2023-2025 Sequoia.

• Significantly improves on- and off-road ride quality and performance over stock
• Dual rate rear coil springs with ICON-engineered ride and overload rates
• Dual stage powder coating for corrosion resistance
• Lifetime guarantee against sagging/breakage
• Vehicle specific design for 23-25 Sequoia
• Provide 2" of rear lift height over stock

This Part Fits:

ICON Triple Rate rear coil springs for 2022-2025 Tundra provides a modest increase in ground clearance while greatly enhancing on- and off-road performance, especially when used with ICON shocks and suspension components. The triple-rate coil design gives a softer droop and ride rates with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Specifically designed to net .75" of rear lift on a Tundra equipped with a TRD suspension Package or 1.25" of rear lift on a non-TRD Tundra desiring taller rear ride heights. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2022-2025 Tundra.

• Vehicle specific design to yield more lift on a Tundra equipped with TRD suspension packages
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• Significantly improves on- and off-road ride quality and performance over stock
• 1.25" rear lift height over stock on non-TRD models
• Dual stage powder coating for corrosion resistance
• .75" rear lift height over stock on TRD models
• Lifetime guarantee against sagging/breakage

This Part Fits:

ICON Triple Rate rear coil springs for 2022-2025 Tundra provides a modest increase in ground clearance while greatly enhancing on- and off-road performance, especially when used with ICON shocks and suspension components. The triple-rate coil design provides a softer droop and ride rates with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Specifically designed to net .5" of rear lift on a non-TRD Tundra or 0" of rear lift on a Tundra equipped with a TRD suspension Package desiring improved performance, but OE ride height. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the vehicle.

• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• Significantly improves on- and off-road ride quality and performance over stock
• TRD package equipped models remain stock height in rear
• Dual stage powder coating for corrosion resistance
• .5" rear lift height over stock on non-TRD models
• Lifetime guarantee against sagging/breakage

This Part Fits:

ICON Triple Rate rear coil springs for 2022-2024 Toyota Tundra provide increased ground clearance while greatly enhancing on- and off-road performance as part of ICON's 6" Lift Performance Suspension System. The triple-rate coil design provides a softer droop and ride rates with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Specifically designed to net 3" of rear lift on a Tundra equipped with a TRD suspension Package or 3.5" of rear lift on a non-TRD Tundra. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2022-2024 Toyota Tundra.

• Vehicle specific design to yield more lift on a Tundra equipped with an ICON 6" Lift Performance Suspension System
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• Significantly improves on- and off-road ride quality and performance over stock
• 3.5" rear lift height over stock on non-TRD models
• Dual stage powder coating for corrosion resistance
• 3" rear lift height over stock on TRD models
• Lifetime guarantee against sagging/breakage

This Part Fits:

The ICON Jeep Gladiator rear coil springs provide 1.5" of lift height and feature a triple rate design with unique ICON-engineered droop, ride, and overload rates. This triple rate design allows for a soft rate at ride height for superb on-road comfort and a firmer overload rate that increases during compression for excellent bottoming resistance and off-road performance. Additionally, an even softer droop rate is engaged when the suspension approaches full extension for improved off-road ride quality. Like all ICON coil springs they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2020-UP Jeep JT Gladiator.

• ICON 1K tested under rigorous off-road conditions to validate performance, strength, and durability
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• 23% increase in rear wheel travel when paired with ICON shocks
• Dual stage powder coating for corrosion resistance
• Lifetime guarantee against sagging/breakage
• 1.5" rear lift height over stock

This Part Fits:

The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep Wrangler JL coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon JL) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs with lifetime guarantee against sagging/breakage
• Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
• 2" rear increase in wheel travel (when paired with ICON shocks)
• Improves on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• Includes swaybar links and bump stop spacers
• 2.5" lift height

This Part Fits:

The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs with lifetime guarantee against sagging/breakage
• Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
• 3" front increase in wheel travel (when paired with ICON shocks)
• 2.5" front lift height on Wrangler/2" front lift on Gladiator
• Improves on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install

This Part Fits:

The ICON Vehicle Dynamics 2007-2018 Jeep Wrangler JK 3" lift coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JK coil springs provide 3" of front lift height over stock and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2007-2018 Jeep Wrangler JK.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Dual rate coil springs improve on and off-road ride quality over stock
• Fits 33" tires (35" with optional aftermarket high clearance fenders)
• Increase in wheel travel when paired with ICON shocks
• 100% bolt-on system makes for an easy install
• Lifetime guarantee against sagging/breakage
• 3" lift height over stock

This Part Fits:

2014-UP RAM 2500 .5" LIFT REAR PERFORMANCE SPRING KIT

This Part Fits:

ICON engineers have also developed optional "Performance Systems" that include multi-rate rear coil springs in place of the rear spacer. The lighter initial rate of these performance rear coil springs helps the truck feel smoother and more controlled over washboard roads, small whoops, or similar terrain. The secondary rate allows the truck to maintain exceptional ride quality over larger obstacles, while at the same time retaining factory payload capacity. These systems were developed with the chase truck type of application in mind, and will significantly increase the on and off-road performance of the RAM 2500 when driven aggressively.

This Part Fits:

The ICON Vehicle Dynamics 2.5" Dual Rate Spring System for 2014-UP Ram 2500 / 2013-Up 3500 4WD levels out your truck and offers you both incredible ride quality and performance. This 2.5" dual rate spring system offers an initial soft ride zone with an aggressive second rate to help prevent bottoming out and are optimized for use on trucks equipped with diesel engines. These ICON springs have a dual stage powder coat process to help prevent corrosion and are shot peened and pre-set to prevent sagging. Front extended length shocks are required for complete installation, and we offer 2.0 Aluminum Series smooth body and Remote Reservoir or our 2.5 Series Reservoir shock with or without CDC (Compression Damping Contol) Valve. All ICON shocks are engineered to be the correct length offering maximum droop and compression travel, then tuned to work hand in hand with these springs for the best available on and offroad performance.

• Front extended length shocks are required for complete installation
• Increased wheel travel and ride quality over stock
• ICON engineered dual rate coil springs
• No drive shaft modifications needed
• No change in towing capacity
• Less body roll than stock

This Part Fits:

ICON 03-12 Dodge Ram HD 4WD 4.5in Dual Rate Spring Kit

This Part Fits:

The ICON Vehicle Dynamics 2.5 inch Dual Rate Spring System for 2003 - 2012 Ram 2500 / 3500 4WD levels out your truck and offers you both incredible ride quality and performance. This 2.5 inch dual rate spring system offers an initial soft ride zone with an aggressive 2nd rate to help prevent bottoming out. These ICON springs have a dual stage powder coat process to help prevent corrosion and are shot peened and pre-set to prevent sagging. Also included are longer urethane bumpstops that have a more progressive bottom out, and sway bar drop brackets to compliment the additional travel. Front shocks are required for complete installation and we offer 2.0 Aluminum Series smooth body and Remote Reservoir, or our 2.5 Series Reservoir shock with or without CDC (compression damping control) Valve. All ICON shocks are engineered to be the correct length offering maximum droop and compression travel, then tuned to work hand in hand with these springs for the best available on and offroad performance.

• Increased wheel travel and ride quality over stock
• ICON engineered dual rate coil springs
• No drive shaft modifications needed
• No change in towing capacity
• Level stance front to rear
• Less body roll than stock

This Part Fits:

The ICON Dodge Ram 1500 rear coil springs provide 1.5" of lift height and feature a dual rate design with ICON-engineered ride and overload rates. This dual rate design allows for a soft rate at ride height for superb on-road comfort and a firmer secondary rate that increases during compression for excellent payload support, bottoming resistance, and off-road performance. Like all ICON coil springs they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2009-2023 Dodge Ram 1500.

• ICON 1K tested under rigorous off-road conditions to validate performance, strength, and durability
• Dual rate rear coil springs with ICON-engineered spring rates
• Increase in rear wheel travel when paired with ICON shocks
• Dual stage powder coating for corrosion resistance
• Lifetime guarantee against sagging/breakage
• 1.5" rear lift height over stock

This Part Fits:

These replacemnt coil springs can be installed onto certain ICON coilover applications to compensate for heavier weight added to the front end of the vehicle. On these applications the increased spring rate will allow for taller ride heights without adjusting coil preload beyond ICON's maximum setting, resulting in coil bind. Please consult an ICON representaitive for information on supported applications.

• Great option for certain applications to support added front end weight over stock
• 14.00" free length, 3.00" inner diameter, 700 lbs/in spring rate
• Dual stage powder coating for excellent corrosion resistance
• Lifetime warranty against sagging and breaking

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

H&R Adventure Lift Springs: The desire to explore thrives inside us all. Which is why H&R ride development engineers have crafted lift springs for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

(hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

for more capable exploring and overland adventuring. H&R Lift Springs have a mild lift of +1.0 to +1.5 inches, depending on application, for more ground clearance, improved suspension travel, and a commanding view of the road.

• (hf) 54SiCr6 Spring Steel, Shot Peened, Block Set, Lightweight, Strong and Resilient
• makes room for bigger tires and wheels
• Compensates for heavy accessories
• Increases ground clearance
• Improves suspension travel
• made in Germany

This Part Fits:

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.

• Guarantee Superior Performance And Functionality

This Part Fits:

Fabtechs development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market. Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.

• Ride Height And Proper Front Suspension Geometry
• Extended Length Coil Springs For Increased

This Part Fits:

Coil Spring Kit; Black; Front; For 6 in. Lift; For PN[K2011/K2050/K2052/K2054/K2156/K2156M/K2157/K2157M/K2155/K2155M/K2132/K2131/K2130/K2217M/K2217DL/K2218M/K2219M/K2219DL/K2010];

• The Kits Are Made From The Highest Quality Materials
• Guarantee Superior Performance And Functionality
• Other Parts Required For A Complete Set

This Part Fits: