Fits 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator JT models.

The ICON Vehicle Dynamics Front Dual Rate Coil Spring Kit is engineered for Jeep owners who demand superior ride quality on the street without sacrificing off-road capability. This 100% bolt-on system provides 2.5 inches of front lift on the Wrangler JL (based on a 4-door Rubicon) and 2 inches of front lift on the Gladiator JT. The sophisticated dual-rate design features a soft initial spring rate for exceptional highway comfort and a firmer secondary rate that provides essential bottoming resistance and stability during aggressive off-road maneuvers.

Every spring undergoes "ICON 1K" testing, ensuring they can withstand the most rigorous trail conditions. When paired with ICON shocks, this kit allows for an additional 3 inches of front wheel travel. These springs enable the fitment of 35-inch tires, or 37-inch tires when used with the optional bump stop spacer kit (PN: 22029).

• Lift Height: 2.5" (Wrangler JL) / 2" (Gladiator JT)
• Design: Dual-rate coil for optimized on-road comfort and off-road control
• Testing: ICON 1K tested for strength and durability
• Travel: Increases wheel travel by 3" when used with ICON shocks
• Tire Clearance: Fits 35" tires (37" with PN: 22029)
• Installation: 100% bolt-on system
• Guarantee: Lifetime guarantee against sagging or breakage
• MPN: 22025

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited models (Rubicon, Sahara, Sport, X, and Special Editions).

The ICON Vehicle Dynamics 22010 3-inch front lift coil springs are engineered for Jeep owners who demand superior suspension performance without sacrificing on-road comfort. These dual-rate springs provide 3 inches of lift height over stock, allowing for increased wheel travel and the clearance needed for larger tire configurations. The dual-rate design features a softer initial rate for smooth street driving and a firmer secondary rate that engages during compression to provide excellent bottoming resistance during aggressive off-road use.

Constructed for long-term durability, these springs are "ICON 1K" tested under rigorous conditions to validate their strength and tune. ICON backs these coils with a lifetime guarantee against sagging or breakage, ensuring your suspension maintains its height and performance for the life of the vehicle.

• Provides 3 inches of front lift height over stock
• Dual-rate design balances on-road comfort with off-road bottoming resistance
• Clears 33-inch tires (35-inch tires possible with high-clearance fenders)
• 100% bolt-on installation for a straightforward upgrade
• Tested under ICON 1K off-road conditions for maximum durability
• Lifetime guarantee against sagging and breakage
• Manufacturer Part Number: 22010

Fits 2014-2022 Ram 2500 (Big Horn, Laramie, Limited, Power Wagon, and Tradesman).

Improve the ride quality and stance of your heavy-duty truck with the ICON Vehicle Dynamics .5-inch Rear Performance Spring Kit. This kit is engineered to provide a subtle increase in rear ride height while enhancing overall suspension performance and load handling. These springs are a direct bolt-on replacement for factory rear coils, designed to correct the vehicle's stance and provide a more refined feel over various terrains compared to stock components.

• Provides a precise .5-inch rear lift height
• Dual-rate spring design for improved ride quality and performance
• Direct replacement for OE rear coil springs
• Fits all 2014-2022 Ram 2500 2WD/4WD models
• Manufacturer Part Number: 214206

Fits select 2014-2018 Ram 2500 trucks (including Power Wagon, Laramie, and Tradesman).

ICON engineers developed this 2-inch Rear Performance Spring Kit to replace the factory rear spacers found in many lift systems. These multi-rate coil springs are designed to significantly improve ride quality and suspension cycling for 2014-2018 Ram 2500 trucks during aggressive on- and off-road driving. The dual-rate design features a lighter initial rate to soak up washboard roads and small chatter, while the secondary rate provides the necessary support for larger obstacles and maintains the vehicle's factory payload capacity.

• Provides 2 inches of rear lift height
• Multi-rate design for superior comfort and bottom-out resistance
• Direct replacement for rear spacers or worn OE springs
• Maintains factory towing and payload capacities
• Includes driver and passenger side rear coil springs
• Manufacturer Part Number: 214202

Fits select 2013-2022 Ram 3500 and 2014-2022 Ram 2500 4WD models (Optimized for Diesel Engines).

Level your heavy-duty Ram 4WD while significantly improving suspension performance with the ICON Vehicle Dynamics 2.5" Dual Rate Spring System. This kit is engineered to provide a leveled stance and improved ride quality without sacrificing the vehicle's towing capacity. These springs are specifically optimized for diesel-equipped trucks, providing the necessary rate to handle the engine's weight while improving overall wheel travel.

The dual-rate design offers the best of both worlds: an initial soft ride zone for exceptional comfort during daily driving, followed by an aggressive second rate that helps prevent bottoming out during heavy compression or off-road use. To ensure long-lasting performance and maintain ride height, ICON springs undergo a shot-peening and pre-setting process that prevents sagging. A dual-stage powder coat finish provides superior corrosion resistance for harsh environments.

Note: Front extended length shocks are required for complete installation to accommodate the increased travel.

• Manufacturer Part Number: 214200
• Lift Height: 2.5 inches
• Dual-rate design for balanced on-road comfort and off-road control
• Shot-peened and pre-set to prevent spring sag
• Dual-stage powder coat finish for maximum corrosion protection
• Direct fit; no drive shaft modifications required
• Maintains factory towing capacity

Fits select 2003-2013 Dodge Ram 2500 and 3500 4WD heavy-duty trucks. This ICON Vehicle Dynamics dual-rate coil spring kit is designed to significantly improve ride quality and suspension performance. By utilizing a dual-rate design, these springs provide a plush initial rate for superior on-road comfort while offering a firmer secondary rate to handle large impacts and prevent bottoming out during aggressive off-road use.

• Provides 4.5 inches of front lift height
• Dual-rate design balances street comfort with off-road control
• Shot-peened and preset to prevent spring sag over time
• Compatible with factory mounting points for a direct-replacement fit
• Durable powder-coated finish for corrosion resistance
• Manufacturer Part Number: 214010

Whether you are navigating washboard fire roads or daily commuting, these springs provide the necessary clearance for larger tire fitment and the travel needed for serious trail performance. This kit is a foundational component for any Dodge Ram HD suspension upgrade.

Fits select 2003-2013 Dodge and Ram 2500/3500 4WD HD trucks. This 2.5-inch leveling system improves both on-road ride quality and off-road performance by replacing factory front coils with ICON-engineered dual-rate springs.

These dual-rate springs feature a soft initial rate for better small-bump compliance and a firmer secondary rate to manage larger impacts and prevent bottoming out. To ensure long-term durability and ride height consistency, ICON coil springs are shot-peened and pre-set to prevent sagging. A dual-stage powder coat finish provides superior corrosion resistance for harsh environments. This kit also includes extended-length urethane bumpstops with a progressive bottom-out characteristic and sway bar drop brackets to maintain proper geometry with the increased travel.

• Ride Height: 2.5 inches of front lift
• Construction: Shot-peened, pre-set dual-rate steel coils
• Finish: Dual-stage powder coat
• Maintenance: Maintains factory towing capacity; no driveshaft modifications required
• Included Components: Dual-rate coil springs, sway bar drop brackets, and urethane bumpstops
• Installation Note: Front shocks of the correct length are required for installation (ICON 2.0 or 2.5 Series recommended)
• Manufacturer Part Number: 212500

Fits 2009-2023 Ram 1500 and Ram 1500 Classic models across all trims including Rebel, Laramie, and TRX.

The ICON Vehicle Dynamics 212150 rear coil spring kit provides 1.5 inches of lift height while solving the common compromise between ride quality and load capacity. These springs feature a dual-rate design with ICON-engineered rates: a soft initial rate for exceptional on-road comfort and a firmer secondary rate that engages during suspension compression. This transition provides the necessary payload support and bottoming resistance required for towing or aggressive off-road use.

Every ICON coil spring is 1K tested under rigorous conditions to ensure long-term durability and performance. To protect against the elements, the springs are finished with a dual-stage powder coating. ICON backs these springs with a lifetime guarantee against sagging or breakage, ensuring your truck maintains its stance and ride quality for years to come.

• 1.5-inch rear lift height over stock equipment
• Dual-rate design for optimized street comfort and off-road performance
• Increases rear wheel travel when used in conjunction with ICON shocks
• Dual-stage powder coated finish for maximum corrosion resistance
• ICON 1K tested for strength and durability
• Lifetime guarantee against sagging or breakage
• Manufacturer Part Number: 212150

Fits select 1995-2024 Toyota 4Runner, Tacoma, Tundra, FJ Cruiser, Sequoia, and Lexus GX460/GX470.

Designed specifically for ICON Vehicle Dynamics coilover applications, this 700 lbs/in replacement coil spring is engineered to manage the additional front-end weight of aftermarket bumpers, winches, and armor. By increasing the spring rate, this coil allows for higher ride heights without exceeding ICON's maximum preload settings, effectively preventing coil bind and maintaining proper suspension travel.

Each spring is manufactured with precision and finished in a dual-stage black powder coating for superior corrosion resistance against the elements. This heavy-duty spring is an essential upgrade for overlanders and off-roaders whose vehicles have outgrown the standard spring rates provided in base coilover kits.

• Part Number: 1400.0300.0700 (MPN: 158508)
• Free Length: 14.00"
• Inner Diameter: 3.00"
• Spring Rate: 700 lbs/in
• Finish: Dual-stage black powder coat
• Warranty: Lifetime against sagging and breaking

Fits 2018-2020 Volkswagen Tiguan (S, SE, SEL, SEL Premium, and R-Line models).

H&R Adventure Raising Springs are engineered for Volkswagen Tiguan owners looking to enhance their vehicle's overland capability and off-road stance. These lift springs provide a mild increase in ride height of approximately 1.0 to 1.5 inches, offering better ground clearance and improved approach and departure angles for trail navigation.

Each spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure maximum durability and consistent performance under load, the springs are shot-peened and block-set to prevent sagging over time. This high-strength, lightweight design allows the suspension to better compensate for heavy gear and accessories while maintaining excellent ride quality and increased suspension travel.

• Lift Height: +1.0 to +1.5 inches (application specific)
• Material: High-tensile 54SiCr6 spring steel
• Construction: Shot-peened and block-set for fatigue resistance
• Compatibility: Designed specifically for the VW MQB chassis
• Origin: Made in Germany
• Part Number: 54855

Fits 2018-2020 Volkswagen Atlas 4Motion models (2.0T).

H&R Adventure Raising Springs are engineered for drivers looking to enhance the off-road capability and stance of their Volkswagen Atlas. These springs provide a mild lift of approximately 1.0 to 1.5 inches, delivering increased ground clearance and improved suspension travel for overland adventuring. This additional height allows for the fitment of larger wheel and tire packages and helps compensate for the added weight of heavy accessories like roof racks or hitch carriers.

Crafted in Germany, these springs are manufactured from high-tensile 54SiCr6 spring steel. To ensure long-term performance and reliability, every spring is shot-peened to increase service life and block-set to prevent sagging over time.

• Approximate Lift: 1.0 to 1.5 inches
• Material: 54SiCr6 high-tensile spring steel
• Process: Shot-peened and block-set for durability
• Improves ground clearance and provides a commanding view of the road
• Compensates for heavy equipment and overland gear
• Manufactured in Germany
• Manufacturer Part Number: 54796

Fits 1997-2005 Jeep Wrangler TJ models, including Rubicon, Sahara, SE, Sport, Unlimited, and X.

H&R Adventure Raising Springs are engineered for the overland enthusiast seeking improved ground clearance and a more capable stance. These springs provide a mild lift of +1.0 to +1.5 inches (depending on application), allowing for the fitment of larger tires and wheels while increasing suspension travel. Designed to compensate for the weight of heavy off-road accessories like bumpers and winches, these springs maintain superior ride quality during technical trail use or highway transit.

• Manufactured from high-tensile 54SiCr6 spring steel for maximum durability
• Shot-peened and block-set for a long service life without sagging
• Improves ground clearance and off-road approach/departure angles
• Lightweight, resilient design made in Germany
• Direct fitment to factory suspension mounting points
• Manufacturer Part Number: 52107

Fits 2005-2010 Jeep Grand Cherokee and Commander models across all trims including Laredo, Limited, Overland, SRT8, and Sport.

H&R Adventure Lift Springs are engineered for drivers who require increased off-road capability and ground clearance for overland adventures. These springs provide a mild lift of +1.0 to +1.5 inches, depending on the specific application, which provides the necessary room for larger tire and wheel combinations and helps the vehicle clear trail obstacles more effectively.

Precision-manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Each spring is shot-peened and block-set to ensure maximum strength, resilience, and resistance to sagging over time. The increased spring rate also helps compensate for the weight of heavy aftermarket accessories like off-road bumpers, winches, or roof racks, all while maintaining excellent suspension travel and ride quality.

• Provides approximately +1.0 to +1.5 inches of lift
• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for durability and long service life
• Increases ground clearance and improves suspension travel
• Accommodates larger wheel and tire packages
• Designed and made in Germany
• Manufacturer Part Number: 52101

Fits select 2001-2012 Ford Escape, Mazda Tribute, and Mercury Mariner models (2WD/4WD / 4-Cyl/V6).

H&R Adventure Raising Springs are engineered for the driver who wants more capability from their crossover. These lift springs provide a mild increase in ride height of approximately +1.0 to +1.5 inches, depending on the specific application. This lift provides essential ground clearance for overland adventuring and off-road exploration while offering a more commanding view of the road.

Constructed in Germany from high-tensile 54SiCr6 spring steel, these springs are designed for durability and resilience. Every spring undergoes a shot peening process to increase service life and is block set to prevent sagging, ensuring the vehicle maintains its lifted stance even when compensating for heavy accessories like roof racks or gear. The additional height also allows for the installation of larger wheel and tire packages.

• Manufacturer Part Number: 51602
• Lift Height: +1.0" to +1.5" (approximate)
• Material: 54SiCr6 Spring Steel
• Manufacturing: Shot Peened and Block Set for durability
• Optimized for improved suspension travel and clearance
• Made in Germany

Fits select 2009-2017 Audi Q5 models, including Premium, Premium Plus, Prestige, Hybrid, and TDI variants.

H&R Adventure Raising Springs are engineered for the Audi Q5 owner looking to enhance off-road capability and overland performance. These springs provide a mild lift of approximately +1.0 to +1.5 inches (depending on application), increasing ground clearance and improving suspension travel for better handling on uneven terrain. This additional height also provides a more commanding view of the road and creates necessary clearance for larger wheel and tire packages.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Every spring is shot peened to increase service life and block set to prevent sagging over time. Whether you are compensating for heavy accessories or preparing for your next adventure, H&R Adventure Raising Springs deliver the strength and resilience required for demanding environments.

• Approximate lift: +1.0 to +1.5 inches
• Material: High-strength 54SiCr6 spring steel construction
• Shot peened and block set for maximum durability and fatigue resistance
• Accommodates larger tire and wheel combinations
• Made in Germany
• Manufacturer Part Number: 50383

Fits 2018-2020 Audi Q5 Premium, Premium Plus, and Prestige models.

H&R Adventure Raising Springs are engineered for owners seeking increased ground clearance and improved off-road capability without sacrificing daily drivability. Designed specifically for the Audi Q5 (FY) chassis, these springs provide a lift of approximately +1.0 to +1.5 inches. This additional height improves suspension travel, offers a more commanding view of the road, and provides the necessary clearance to accommodate larger tire and wheel packages or heavy overland accessories.

Manufactured in Germany, these springs are wound from high-tensile 54SiCr6 spring steel. Every spring is shot-peened to extend service life and is "block set" to ensure it maintains its height and rate without sagging over time. The result is a lightweight, resilient suspension component that handles the demands of both pavement and trail.

• Approximate Lift: +1.0 to +1.5 inches
• Material: 54SiCr6 high-tensile spring steel
• Shot-peened for increased durability and longevity
• Block set to prevent sag and maintain ride height
• Compatible with factory suspension components
• Made in Germany
• Manufacturer Part Number: 50380

Fits 2017-2021 Audi Q7 Premium, Premium Plus, and Prestige models without factory air suspension.

H&R Adventure Raising Springs are engineered for drivers who want to enhance their vehicle's overland capabilities and off-road stance. These springs provide a mild lift of approximately +1.0 to +1.5 inches, increasing ground clearance to better navigate obstacles and providing additional room for larger wheel and tire packages. By compensating for the weight of heavy off-road accessories, these springs ensure your suspension maintains optimal travel and a commanding view of the road.

Manufactured in Germany, each spring is crafted from high-tensile 54SiCr6 spring steel. To ensure long-term durability and resistance to sag, the springs undergo a rigorous shot-peening process and are block-set to their final dimensions. The result is a lightweight yet resilient spring that improves both the look and utility of your Audi Q7.

• Fits 2017-2021 Audi Q7 (4M) without Air Suspension
• Approximate lift: +1.0" to +1.5" (application specific)
• Constructed from 54SiCr6 spring steel for strength and resilience
• Shot-peened and block-set for maximum longevity
• Improves suspension travel and off-road clearance
• Made in Germany
• Manufacturer Part Number: 50371

Fits 2009-2019 Audi Q3, Q3 Quattro, and Volkswagen Tiguan (including Limited and R-Line) models.

H&R Adventure Raising Springs are engineered for owners who want to enhance their vehicle's off-road capability and overland readiness. These springs provide a lift of approximately 1.0 to 1.5 inches, depending on the specific application, delivering increased ground clearance and a more commanding view of the road. This added height also makes room for larger tire and wheel combinations while increasing suspension travel to better handle varied terrain.

• Provides approximately +1.0 to +1.5 inches of lift
• Manufactured from high-tensile 54SiCr6 spring steel for maximum durability
• Shot-peened to increase service life and resist fatigue
• Precision block-set to ensure the springs never sag or lose ride height
• Compensates for the weight of heavy overland accessories
• Made in Germany
• Part Number: 29037-1

Fits 2007-2011 Honda CR-V (EX, EX-L, LX, SE).

H&R Adventure Lift Springs are engineered for drivers who demand more capability from their vehicles. Designed to provide a mild lift of approximately +1.0 to +1.5 inches, these springs increase ground clearance and improve suspension travel for overland adventuring. This additional height provides a more commanding view of the road and creates the necessary clearance for larger tire and wheel combinations, while also helping to compensate for the weight of heavy exterior accessories.

• Precision manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum strength and resilience
• Lightweight design that maintains ride quality while increasing height
• Provides approximately +1.0 to +1.5 inches of lift (application dependent)
• Engineered and manufactured in Germany
• Manufacturer Part Number: 29036-1

Fits 2011-2013 Kia Sorento 4WD models including Base, EX, LX, and SX trims.

H&R Adventure Raising Springs are engineered for the Kia Sorento owner looking to increase ground clearance and improve suspension travel for light off-road use or overlanding applications. These springs provide a mild lift to help accommodate larger tire and wheel packages and compensate for the weight of heavy accessories like roof racks or gear. Designed for durability and performance, these springs replace the factory units while maintaining excellent ride quality.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and resilience
• Shot-peened for increased service life and resistance to fatigue
• Block set to ensure consistent ride height without sagging
• Precision engineered and manufactured in Germany
• Direct replacement for factory springs
• Manufacturer Part Number: 28980-1

Fits 2019-2020 Mercedes-Benz G550 Base (463A) models equipped with Agility Control and non-adaptive suspension.

Engineered for more capable exploring and overland adventuring, the H&R Raising Spring Kit provides a mild lift of +1.0 to +1.5 inches. This increased ride height delivers greater ground clearance and improved suspension travel while providing a commanding view of the road. These springs are specifically designed to accommodate larger tire and wheel combinations and help compensate for the added weight of heavy off-road accessories like winch bumpers or roof racks.

Each spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term performance and reliability, the springs are shot-peened to increase service life and block-set to prevent sagging. The result is a lightweight, strong, and resilient suspension upgrade that maintains ride quality while enhancing off-road utility.

• Approximate Lift Height: +1.0 to +1.5 inches
• Material: High-tensile 54SiCr6 spring steel
• Process: Shot-peened and block-set for durability
• Compatibility: For models with Agility Control / Non-Adaptive Suspension
• Manufacturing: Made in Germany
• Manufacturer Part Number: 28669-1

Fits 2007-2018 Jeep Wrangler and Wrangler JK Unlimited 4-Door 4WD models.

This Fabtech Long Travel Coil Spring Kit is designed to provide a 5-inch lift for Jeep JK owners looking to maximize suspension articulation without sacrificing ride quality. Engineered specifically for 4-door models, these springs are calibrated to handle the vehicle's weight while providing the increased free length necessary for long-travel shocks. By replacing your factory springs with these precision-wound coils, you gain the clearance needed for larger tire fitment and the compliance required for technical off-road terrain.

• Provides 5 inches of lift height for improved ground clearance
• Long-travel design maintains spring seating during high-articulation maneuvers
• Specifically tuned spring rates for 4-door Jeep JK weight distribution
• Includes both front and rear coil springs
• Designed for use with long-travel shocks and compatible suspension components
• Manufacturer Part Number: FTS24154

Fits 2005-2007 Ford F-250 and F-350 Super Duty 2WD models (V10 and Diesel).

The Fabtech 6-inch Basic Lift System Component Box 2 is a foundational element of a complete suspension lift, specifically engineered for the 2005-2007 Ford Super Duty 2WD platform. This component box focuses on increasing ride height while maintaining proper front suspension geometry, ensuring the truck handles predictably even after the lift is installed. By utilizing extended length coil springs, Fabtech provides the necessary clearance for larger tires without sacrificing the load-carrying capacity or ride quality expected from a Super Duty.

• Part of the Fabtech 6-inch Basic Lift System
• Designed for 2WD V10 and Diesel engine configurations
• Includes extended length coil springs for increased ride height
• Engineered to maintain correct front suspension geometry
• Heavy-duty construction for off-road durability
• Manufacturer Part Number: FTS22058BK

Fits 2005-2026 Ford F-250 and F-350 Super Duty 4WD trucks.

This Fabtech 6-inch front coil spring kit (FTS22024BK) is engineered to provide the precise spring rate and height required for heavy-duty lifted applications. These springs are designed to maintain optimal ride quality and front-end geometry when used in conjunction with Fabtech 6-inch suspension systems, replacing stock springs with high-performance units that can handle the increased demands of a lifted truck.

• Lift Height: 6 inches
• Position: Front
• Finish: Heavy-duty black powder coat
• Manufacturer Part Number: FTS22024BK
• Compatible with Fabtech system PNs: K2011, K2050, K2052, K2054, K2156, K2156M, K2157, K2157M, K2155, K2155M, K2132, K2131, K2130, K2217M, K2217DL, K2218M, K2219M, K2219DL, and K2010

Constructed from high-tensile spring steel and finished in a durable black coating, these coils are built to resist sagging and corrosion under rigorous on- and off-road conditions.

Fits select 1999-2005 Ford F-250, F-350 Super Duty, and Excursion 2WD models (7.3L).

The Fabtech FTS137 Front Coil Spring Kit is specifically engineered for 2WD Super Duty and Excursion platforms equipped with a 6-inch lift. These heavy-duty springs are custom-wound to manage the significant weight of the 7.3L diesel engine, ensuring the vehicle maintains its ride height and suspension geometry even under heavy load or during suspension cycling. Designed as a direct component for several Fabtech lift systems, these springs provide a controlled ride that withstands the vertical pressures of road dips and varied terrain.

• Lift Height: 6 inches
• Position: Front
• Engine Compatibility: 7.3L Power Stroke Diesel
• Drive Type: 2WD
• Manufacturer Part Number: FTS137
• Compatible with Fabtech Lift Kits: K2101, K2104, K2099, K2103, K2100, K2099M, K2100M, K2101M, K2103M, K2104M

Fits select 1999-2005 Ford F-250 Super Duty, F-350 Super Duty, and Excursion models (2WD) (6.0L).

The Fabtech FTS136 Front Coil Spring Kit is engineered to provide a consistent 6-inch lift while maintaining predictable handling and ride quality. These heavy-duty coil springs are custom-designed for the specific weight and geometry of 2WD Super Duty and Excursion platforms, ensuring they can withstand the increased pressure of road dips and off-road terrain. This kit is intended as a replacement for factory springs when installing or servicing select Fabtech 6-inch suspension systems.

• Lift Height: 6 Inches
• Position: Front
• Drive: 2WD
• Directly compatible with Fabtech systems: K2098, K2102, K2097, K2097M, K2098M, and K2102M
• Manufacturer Part Number: FTS136

Fits 2019-2023 Ram 1500 models including Big Horn, Laramie, Limited, Rebel, and Tradesman. These heavy-duty springs are engineered specifically for trucks carrying a constant bed load.

Carli Multi-Rate HD rear coil springs provide a significant upgrade for Ram 1500 owners who experience rear-end sag or a harsh ride due to permanent weight in the bed. By utilizing a multi-rate design, these springs maintain a supple initial stroke for daily driving comfort while providing the necessary support to keep the vehicle level and planted when loaded. This design eliminates the

Fits 2019-2023 Ram 1500 4x4 models including Big Horn, Laramie, Limited, Rebel, and Tradesman.

Carli Multi-Rate rear coil springs are engineered to improve the ride quality and handling of your 2019-2023 Ram 1500. By replacing the factory rear coils, these springs provide a consistent 1/2 inch of rear lift while delivering a more planted, controlled feel over varied terrain. The multi-rate design is specifically tuned to offer plush compliance over small bumps without sacrificing the stability needed for towing or hauling.

Built for durability in harsh under-chassis environments, these springs feature a heavy-duty black powdercoat finish to resist corrosion and road debris. Please note that these springs are designed for standard bed configurations and are not compatible with vehicles equipped with the multi-function tailgate or Rambox storage system.

• Provides 1/2 inch of rear lift height
• Multi-rate design for improved ride comfort and stability
• Durable black powdercoat finish
• Direct-fit replacement for factory rear coil springs
• Manufacturer Part Number: CS-RAM15MRC-19-R

Fits select 2005-2026 Ford F-250 and F-350 Super Duty 4x4 Diesel models.

Carli Suspension Coil Springs are engineered to deliver a significant improvement in ride quality over factory and generic lift springs. These progressive, multi-rate springs provide a softer initial rate for daily driving comfort while transitioning to a secondary, firmer rate to prevent bottoming out during deep suspension travel. Specifically designed for 4x4 Diesel applications, these springs provide a 4.5-inch lift on 2005-2019 models and a 5.5-inch lift on 2020-2026 models.

To ensure consistent performance and longevity, every spring is shot-peened and pre-set to prevent sagging over time. These coils are also side-specific to account for the weight distribution of the Ford Super Duty chassis, ensuring a level stance and optimal geometry.

• Fits 2005-2026 Ford F-250/F-350 Super Duty 4x4 Diesel
• Lift Height: 4.5" (2005-2019) or 5.5" (2020-2026)
• Multi-rate progressive design for improved ride and bottom-out resistance
• Side-specific engineering for precise fitment
• Shot-peened and pre-set for maximum durability
• Finish: Durable black powdercoat
• Manufacturer Part Number: CS-FMRC-05

Fits select 2011-2026 Ford F-250 and F-350 Super Duty trucks equipped with gas engines.

These Carli Suspension leveling coil springs are engineered to address the harsh ride characteristics often found in factory or lower-quality aftermarket springs. By utilizing a slightly reduced linear rate design, these coils provide a significant improvement in ride comfort and chassis stability without compromising the truck's off-road capability. This specific spring rate is custom-tuned for the weight distribution of Ford gas powertrains to ensure optimal suspension geometry.

The amount of front-end lift achieved depends on the specific vehicle configuration and model year. These springs are finished in a durable black powdercoat to resist corrosion and harsh road debris.

• Provides 3 inches of lift on 2020-2026 Gas F-250/F-350 models
• Provides 2 inches of lift on 2011-2019 Gas F-250/F-350 models
• Provides 1.5 inches of lift on trucks equipped with the Tremor Package
• Linear rate design for predictable handling and improved ride quality
• Durable black powdercoated finish
• Manufacturer Part Number: CS-FLC-11-GAS