The Sparco Steel Adjustable Side Mount (00492LAT) provides a robust and customizable interface between your competition seat and the vehicle floor or seat base. Engineered for maximum rigidity, these heavy-duty steel brackets allow for precision positioning of your side-mount racing seat to achieve the optimal driving posture.

• Constructed from high-strength steel for durability and seat stability
• Multi-hole design provides multiple height and tilt angle adjustment options
• Black powder-coated finish for superior corrosion and wear resistance
• Compatible with Sparco side-mount seats and most other industry-standard side-mount configurations
• Manufacturer Part Number: 00492LAT

The Sparco 00491 Steel Seat Base Adapter provides the rugged, flat mounting surface necessary for the professional installation of Sparco racing seats. This adapter serves as the critical interface between the vehicle's floor or sliders and the seat itself, ensuring a secure, level foundation that maintains structural integrity during performance driving.

• Constructed from heavy-duty steel for maximum rigidity and safety
• Durable black powder-coated finish resists corrosion and wear
• Pre-drilled hole patterns accommodate various mounting configurations
• Essential hardware for proper seat alignment and floor clearance
• Manufacturer Part Number: 00491

The Sparco Heavy Duty 6mm Aluminum Side Mounts provide a rigid, lightweight interface for installing competition seats. These brackets are engineered to meet the demands of performance driving, offering superior strength over thinner alternatives to ensure seat stability and safety under high G-loads. The 6mm construction provides maximum rigidity while keeping weight to a minimum.

• Constructed from 6mm thick high-strength aluminum for maximum rigidity and weight savings
• Multiple mounting configurations allow for precise height and rake (tilt) adjustment to suit the driver's preferred position
• Heavy-duty design minimizes seat flex for improved driver feedback and structural integrity
• Universal compatibility with Sparco side-mount competition seats
• Manufacturer Part Number: 004903

Engineered for maximum rigidity and safety, the Sparco Steel Side Mount Brackets provide a solid foundation for securing side-mount racing seats to seat bases or sliders. These brackets are manufactured from heavy-duty steel to withstand the high-stress loads encountered during track use and competition driving.

The multi-hole design offers a wide range of adjustability, allowing you to fine-tune your seat's height and rake (tilt) angle for the most ergonomic driving position. Finished in a durable black powder coat, these mounts are designed to resist corrosion and wear while maintaining a clean, professional appearance in your cockpit.

• Material: Heavy-duty high-tensile steel
• Finish: Durable black powder coat
• Adjustment: Multiple mounting holes for customized height and tilt
• Compatibility: Fits all Sparco side-mount seats and most other brands with standard side-mounting points
• Manufacturer Part Number: 004902

The Sparco 004901NR Tall Steel Side Mounts provide a secure, high-strength foundation for mounting side-mount racing seats to seat bases or vehicle-specific brackets. Engineered from durable steel and finished in a black powder coat, these brackets feature a "tall" profile to accommodate drivers who require a higher seating position or extra clearance for specific cockpit configurations.

• Manufacturer Part Number: 004901NR
• Construction: High-strength steel plate
• Finish: Durable black powder coating
• Mounting Type: Side-mount configuration
• Profile: Tall design for increased height and adjustment range

These side mounts allow for multiple angle and height configurations via the integrated mounting holes, ensuring your seat is properly aligned for both ergonomics and safety. Designed to fit most Sparco side-mount competition seats, they provide the rigid connection necessary for high-performance driving environments.

Fits select 1986-1995 Jeep CJ7 and Wrangler models (including Base, Laredo, Renegade, Sahara, and Sport).

Maximize the utility of your Jeep's interior with the Rugged Ridge Fold & Tumble Rear Seat. This seat is engineered for Jeep owners who need to quickly transition between carrying passengers and hauling gear. The fold-and-tumble design allows the seat to rotate forward, creating instant cargo space without requiring seat removal.

Each seat is constructed with a heavy-duty, powder-coated welded steel frame to withstand off-road use. The upholstery is a durable automotive-grade vinyl in a Spice finish, designed to match the factory interior and Rugged Ridge front seats. For lasting comfort, Rugged Ridge uses a high-density foam pack that retains its shape over years of use.

• Convenient fold-and-tumble operation for increased cargo capacity
• Upholstered in durable Spice automotive-grade vinyl
• Corrosion-resistant powder-coated welded steel frame
• High-density foam provides a balance of comfort and longevity
• Designed to utilize existing seatbelts
• Mounts to factory points with minimal drilling required
• Manufacturer Part Number: 13462.37

Fits 1986 Jeep CJ7 and 1987-1995 Jeep Wrangler YJ models.

The Rugged Ridge Fold and Tumble Rear Seat provides a versatile solution for Jeep owners who need to balance passenger seating with cargo capacity. This seat features a convenient mechanism that allows it to fold forward and tumble out of the way, instantly expanding your rear storage area without requiring full seat removal.

Engineered for off-road durability, each seat is built on a powder-coated, welded steel frame to resist corrosion and structural fatigue. The interior is upholstered in heavy-duty, automotive-grade vinyl with a black denim finish, designed to match factory styling and Rugged Ridge front seats. High-density foam ensures the seat retains its shape over years of use while providing a comfortable ride for passengers.

• Fold and tumble operation for immediate cargo space expansion
• Durable black denim vinyl upholstery matches OE interiors
• Powder-coated, welded steel frame for maximum structural integrity
• High-density foam pack for long-term comfort and shape retention
• Uses existing factory seatbelt mounting points
• Minimal drilling required for secure installation
• Manufacturer Part Number: 13462.15

Fits 1976-1986 Jeep CJ7 and 1987-1995 Jeep Wrangler (YJ) models.

Expand the utility of your Jeep’s interior with the Rugged Ridge Fold & Tumble Rear Seat. This design provides immediate cargo flexibility by allowing the seat to flip forward and tumble out of the way without requiring complete removal. Constructed for the rigors of off-road use, the seat features a welded steel frame that is powder-coated for corrosion resistance.

The exterior is upholstered in durable, automotive-grade vinyl designed to match the factory interior and Rugged Ridge front seats. For passenger comfort and long-term durability, the seat utilizes a high-density foam pack that resists sagging over time. Installation is straightforward, attaching to existing factory mounting points with minimal drilling required and utilizing the vehicle’s original seatbelts.

• Convenient fold-and-tumble operation for rapid cargo space expansion
• Durable black automotive-grade vinyl matches OE interior styling
• Heavy-duty powder-coated steel frame for lasting structural integrity
• High-density foam pack ensures comfort and shape retention
• Mounts to existing factory points; minimal drilling required
• Designed for use with factory seatbelts
• Manufacturer Part Number: 13462.01

Fits select 1955-1995 Jeep Willys, CJ3, CJ5, CJ6, CJ7, Scrambler, and Wrangler models (YJ).

The Rugged Ridge Standard Rear Seat provides a reliable, fixed-position seating solution for owners who do not require a fold-and-tumble function. This replacement bench seat is engineered to provide long-term durability in open-cabin environments, featuring a welded steel frame and mounting brackets that are fully powder-coated to resist corrosion.

Upholstered in heavy-duty, automotive-grade vinyl with a Black Denim finish, this seat is designed to match the texture and color of original equipment interiors and Rugged Ridge front seats. The unit bolts directly to the vehicle floorboard and is compatible with your factory seat belts. While designed for a secure fit, minimal drilling may be required for certain applications.

• Fixed, non-folding rear bench seat design
• Durable automotive-grade vinyl construction in Black Denim
• Powder-coated steel frame and brackets for maximum service life
• Direct-to-floor mounting for a stable installation
• Designed for use with existing OE seat belts
• Manufacturer Part Number: 13461.15

Fits 1955-1995 Jeep CJ3, CJ5, CJ6, CJ7, Scrambler, Willys, and Wrangler (YJ).

The Rugged Ridge Fixed Rear Seat provides a durable, non-folding seating solution for classic Jeep restoration and utility. Engineered to match factory interior styling and Rugged Ridge front seats, this rear bench is upholstered in heavy-duty automotive-grade vinyl. The internal frame and mounting brackets are constructed from welded steel and finished with a corrosion-resistant black powder coat for lasting durability. This seat mounts directly to the vehicle floorboard and is designed to integrate with your existing factory seatbelts.

• Construction: Powder-coated welded steel frame for maximum rigidity
• Upholstery: Durable black automotive-grade vinyl for interior matching
• Installation: Bolted direct-to-floor design (minimal drilling required)
• Safety compatibility: Engineered to use existing OE seatbelts
• Manufacturer Part Number: 13461.01

Fits select 1976-2002 Jeep CJ5, CJ7, Scrambler, and Wrangler. This Rugged Ridge high-back front seat is an ideal replacement for worn or damaged factory seating, designed to maintain the classic Jeep aesthetic with an integrated headrest and authentic horizontal stitching. The reclinable backrest ensures a custom fit for improved driver comfort and positioning during long hauls or trail rides.

Constructed from heavy-duty, automotive-grade vinyl, this seat is built to withstand the rigors of open-cabin use. The internal frame is made from powder-coated steel to resist corrosion and provide a stable, cradle-style support. It is designed to bolt directly to the factory mounting points using original hardware for most applications. Note: 1997-2002 Jeep Wrangler (TJ) models require specific seat adapters (Rugged Ridge 13201.11 for the left side and 13201.12 for the right side).

• Manufacturer Part Number: 13402.37
• Color: Spice
• Material: Durable Automotive Grade Vinyl
• Frame: Powder Coated Steel
• Adjustable reclining mechanism for personalized comfort
• Integrated headrest with horizontal stitch pattern

Fits 1976-2002 Jeep CJ5, CJ7, CJ8 Scrambler, and Wrangler (YJ/TJ) models.

This Rugged Ridge High-Back Front Seat (13401.37) is engineered as a period-correct replacement for Jeep restoration projects and interior refreshes. It features a fixed, non-reclining back design with an integrated headrest and classic horizontal stitching to maintain the original factory aesthetic. Constructed from durable, automotive-grade vinyl in a Spice finish, this seat is built to withstand the rigors of trail use while providing a clean, professional appearance.

The interior is built for long-term support, featuring dense foam padding and heavy-duty raised springs. This seat is designed to bolt directly to factory mounting points using your existing original hardware. Please note that 1997-2002 Jeep Wrangler TJ models require specific seat adapters for installation: 13201.11 (Left Side) and 13201.12 (Right Side).

• Manufacturer Part Number: 13401.37
• Material: Durable automotive-grade vinyl
• Finish: Spice with horizontal stitching
• Design: High-back fixed (non-reclining) with integrated headrest
• Internal Construction: Dense foam with heavy-duty raised springs
• Mounting: Uses factory hardware; 97-02 Wrangler requires adapters
• Warranty: Limited 5-Year Warranty

Fits select 1976-2002 Jeep CJ5, CJ7, CJ8 Scrambler, and Wrangler (YJ and TJ) models. This Rugged Ridge high-back front seat provides a durable, factory-style replacement for aging or worn-out interior components. Designed specifically for restoration projects, it features an integrated headrest, classic horizontal stitching, and a fixed-back (non-reclining) design that mirrors the original Jeep aesthetic.

Built with automotive-grade vinyl in a Black Denim finish, this seat is engineered for longevity. The internal structure utilizes dense foam and heavy-duty raised springs to maintain support over time. Installation is straightforward, as the seat is designed to bolt directly to factory mounting points using your original hardware. Please note: 1997-2002 Jeep Wrangler TJ models require seat adapters (Left Side: 13201.11, Right Side: 13201.12) for proper fitment.

• Fixed-back high-back design with integrated headrest
• Durable Black Denim automotive vinyl construction
• Dense foam and heavy-duty springs for lasting support
• Uses factory mounting hardware for most applications
• Manufacturer Part Number: 13401.15
• Limited 5-year warranty

Fits select 1976-2002 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ/TJ). This Rugged Ridge high-back replacement seat is engineered for Jeep owners looking to restore their interior to factory specifications while maintaining a classic look. Constructed from durable, automotive-grade vinyl in a gray finish, it features a fixed-back design with horizontal stitching and an integrated headrest.

Built with dense foam and heavy-duty raised springs, this seat provides consistent support during daily driving or trail use. It is designed to utilize your vehicle's original mounting hardware and factory bolts. Note: 1997-2002 Jeep Wrangler TJ models require seat adapters 13201.11 (Left Side) and 13201.12 (Right Side) for proper installation.

• Manufacturer Part Number: 13401.09
• Material: Heavy-duty gray automotive vinyl
• Seat Style: Fixed-back, non-reclining with integrated headrest
• Construction: Dense foam padding and raised heavy-duty springs
• Fitment: Bolt-on installation using factory hardware
• Warranty: Limited 5-Year Warranty

Fits 1976-2002 Jeep CJ5, CJ7, Scrambler, and Wrangler.

This Rugged Ridge High-Back Front Seat is an ideal solution for Jeep restorations and interior refreshes. Engineered to mirror the classic factory aesthetic, it features a non-reclining fixed-back design with an integrated headrest and traditional horizontal stitching. The seat is upholstered in durable, automotive-grade tan vinyl, built to withstand the rigors of open-top driving while providing a comfortable ride via dense foam padding and heavy-duty raised springs.

Installation is straightforward as this seat utilizes your vehicle's original mounting hardware and factory bolts. Note that 1997-2002 Jeep Wrangler TJ models require specific seat adapters for installation: 13201.11 (Left/Driver Side) and 13201.12 (Right/Passenger Side).

• Manufacturer Part Number: 13401.04
• Color: Tan
• Material: Heavy-duty automotive grade vinyl
• Configuration: High-back, non-reclining fixed-back
• Support: Dense foam cushioning with raised spring suspension
• Hardware: Retains factory mounting points
• Warranty: Limited 5-year manufacturer warranty

Fits select 1976-2002 Jeep CJ5, CJ7, Scrambler, and Wrangler models.

The Rugged Ridge Low-Back Non-Reclining Front Seat provides a durable, high-quality replacement for worn original equipment in classic Jeep restorations. This seat is constructed from automotive-grade tan vinyl, specifically chosen to match early interior aesthetics while resisting the rigors of trail and daily use. Inside, dense foam cushioning and heavy-duty raised springs provide firm support that resists sagging better than aging factory frames.

Installation is designed to be straightforward, as this seat is engineered to utilize your vehicle's original mounting hardware and factory bolt locations. It serves as a cost-effective alternative to expensive upholstery work while maintaining the period-correct low-back appearance.

• Materials: Durable automotive-grade tan vinyl for long-term wear resistance
• Internal Support: Dense internal foam with heavy-duty raised springs
• Frame Style: Fixed low-back, non-reclining design
• Installation: Bolts to factory locations using original mounting hardware
• Part Number: 13400.04
• Warranty: Limited 5-year warranty

Fits select 1955-1995 Jeep CJ5, CJ6, CJ7, Scrambler, Willys CJ-5/CJ-6, and Wrangler models. Designed for restoration projects, this Rugged Ridge low-back front seat provides a factory-style replacement that mounts using your vehicle's original hardware and bolts.

Built for long-term durability in open-top environments, the seat features automotive-grade vinyl upholstery over dense foam padding. The internal structure utilizes heavy-duty raised springs to maintain support and seat shape over time. While designed as a direct-fit for many applications, please note that 1955-1975 models may require vehicle modification for successful installation.

• Upholstery: Durable black automotive-grade vinyl
• Padding: Dense foam with heavy-duty raised springs
• Mounting: Reuses original OE mounting hardware and bolts
• Type: Low-back, non-recline fixed position
• Manufacturer Part Number: 13400.01
• Warranty: Limited 5-year manufacturer warranty

Fits select 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ, TJ, LJ) models.

Protect your Jeep’s interior from the elements with Rugged Ridge Fabric Seat Protectors. These covers are engineered to shield your factory or replacement bucket seats from trail dirt, UV damage, and everyday wear. Constructed from durable, UV-treated poly-cotton fabric, they provide a comfortable seating surface that remains cooler than vinyl on hot days. The slip-over design allows for a quick and secure installation on all bucket Jeep seats, including Rugged Ridge replacement units.

Functional storage is built directly into the covers, featuring integrated rear pockets to organize gear and a removable zip-on drink holder for added convenience. Sold as a pair, this kit provides complete protection for your front seating area.

• Manufacturer Part Number: 13235.01
• Durable UV-treated poly-cotton fabric construction
• Integrated rear storage pockets for gear organization
• Includes a removable zip-on cup holder
• Compatible with factory bucket seats and Rugged Ridge replacements
• Sold as a pair (Driver and Passenger side)
• Features ABS flap for secure fitment

Fits select 2007-2012 Jeep Wrangler and Wrangler Unlimited JK models (Rubicon, Sahara, Sport, X, 70th Anniversary) with factory cloth seats.

Protect your Jeep's interior with these precision-engineered Rugged Ridge Custom Fit Neoprene Seat Covers. Constructed from heavy-duty neoprene—the same durable material used in high-end wetsuits—these covers provide a rugged barrier against dirt, water, sweat, and UV damage. Unlike generic covers that use thin stretch nylon, Rugged Ridge utilizes premium materials to ensure a tailored fit that mimics a fresh upholstery job. The neoprene construction also provides a comfortable temperature-stable surface, preventing the discomfort of hot vinyl or leather seats in summer weather.

Installation is simplified using a specialized system of elastic cords, nylon straps, and reinforced hooks that anchor the covers securely to the factory seat mounting points. This set is specifically designed for original equipment seat styles to maintain a clean, professional look throughout the cabin.

• Manufacturer Part Number: 13214.09
• Material: Genuine Neoprene (Wet Suit Material)
• Color: Gray / Black
• Compatibility: Front pair; fits OE cloth seats only (will not fit leather seats)
• Installation: Secure strap, cord, and hook system
• Warranty: Limited 5-Year Warranty

Fits 1976-1995 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ). Replace rusted, seized, or worn-out factory seat mounts with this heavy-duty, direct-fit fold-forward seat riser bracket from Rugged Ridge. This bracket is designed to restore the smooth forward-tilting action required to access the rear cargo or seating area of your Jeep.

Finished in a durable black powder coat, this OE-style riser provides a stable mounting platform for your seat sliders. It is compatible with both original equipment Jeep seats and most aftermarket seats. Note that seat sliders are required for installation and are sold separately.

• Direct-fit replacement for factory seat riser hardware
• Fold-forward design for easy rear-seat access
• Constructed for compatibility with OE and aftermarket Jeep seats
• Durable black finish for corrosion resistance
• Sold individually
• Manufacturer Part Number: 13201.02
• Limited 5-Year Warranty

Fits select 1976-1995 Jeep CJ5, CJ7, Scrambler, and Wrangler models. This Rugged Ridge fold-forward seat riser bracket is an OE-style direct replacement for your worn or rusted driver-side seat mount.

Designed to maintain factory functionality, this bracket allows for easy attachment of seat sliders (sold separately) to secure either original equipment or aftermarket Jeep seats. The fold-forward mechanism ensures easy access to the rear of the cabin, while the heavy-duty construction provides a stable mounting platform. The bracket features a durable black finish for corrosion resistance and long-term durability in open-cabin environments.

• Part Type: Seat Riser Bracket
• Position: Driver Side
• Function: Fold-Forward Design
• Finish: Black
• Fitment Type: Direct Fit / OE Style
• Manufacturer Part Number: 13201.01
• Included: Sold Individually
• Warranty: Limited 5-Year Warranty

The RaceQuip FIA Containment Racing Seat (Large) is a professional-grade seating solution designed for maximum driver protection in competitive motorsport environments. As a full-containment seat, it features integrated lateral supports for the head, shoulders, and torso, significantly reducing movement during high-G cornering and providing critical stabilization in the event of an impact.

• Manufacturer Part Number: 96995599
• FIA Certified for competition use
• Full containment design with integrated head and shoulder bolsters
• Size: Large
• Accommodates multi-point racing harnesses
• Engineered for side-mount installation (hardware sold separately)

The RaceQuip FIA Containment Racing Seat is designed for professional-grade safety in wheel-to-wheel competition. This medium-sized seat features integrated head and shoulder restraints (halo) to significantly reduce lateral movement and enhance driver protection during high-impact scenarios. Engineered with a rigid, energy-absorbing shell, it provides the structural integrity required for sanctioned racing while maintaining a lightweight profile.

• FIA Certified for competition use
• Full containment design with integrated head restraint system
• Flame retardant fabric cover with ergonomic padding for driver comfort
• Reinforced side-mount points for secure installation
• Medium sizing for a precise, secure fit
• Manufacturer Part Number: 96993399

The RaceQuip FIA Racing Seat in XL sizing delivers professional-grade safety and ergonomic support for competitive motorsport applications. Engineered to meet rigorous FIA certification standards, this seat provides the structural integrity required for sanctioned racing while offering a wider shell to accommodate larger drivers comfortably.

• FIA certified for competition use in professional racing series
• Extra-wide (XL) shell design provides increased hip and shoulder room
• Five-slot harness pass-throughs accommodate 4, 5, or 6-point racing harnesses
• Constructed for side-mount installation using standard racing seat brackets
• Upholstered in fire-retardant fabric for maximum driver safety
• Manufacturer Part Number: 96886689

The RaceQuip FIA Racing Seat (Large) is engineered for competitive motorsport applications where driver safety and lateral support are critical. Built to meet stringent FIA certification standards, this seat provides the structural integrity required for sanctioned racing series while offering the ergonomic support needed for long-duration track sessions.

• FIA Certified: Rigorously tested to meet safety standards for professional and amateur competition use.
• Shell Construction: Features a lightweight, rigid fiberglass reinforced plastic (GRP) shell for maximum energy absorption and durability.
• Harness Compatibility: Designed with five seat belt guides to accommodate standard 4-point, 5-point, or 6-point racing harnesses.
• Interior Comfort: Upholstered in a breathable black mesh fabric with high-density foam padding to manage heat and driver fatigue.
• Mounting: Designed for side-mount bracket installation to allow for precise seat positioning and rake adjustment.
• MPN: 96775579

The RaceQuip FIA Certified Racing Seat in Medium provides professional-grade lateral support and safety for competitive track environments. Built to satisfy rigorous FIA standards, this seat is designed for drivers who require a secure, fixed-back seating solution that maintains chassis rigidity and improves driver feedback during high-G cornering.

This seat features an ergonomic shell shape designed to accommodate a variety of body types within the Medium size range. The high-density foam padding is upholstered in a durable, flame-retardant fabric to ensure both comfort and compliance with safety regulations. Integrated harness slots allow for easy installation of 4, 5, or 6-point racing harnesses, ensuring the driver stays properly positioned behind the wheel.

• FIA Certified for competition use
• Sized Medium for precise driver containment
• Reinforced shell construction for maximum rigidity
• Compatible with standard racing harness systems
• Removable seat cushions for easy cleaning or customization
• Manufacturer Part Number: 96663369

The RaceQuip 160mm Steel Seat Mount provides a rigid, secure foundation for installing competition seats into your race vehicle. Engineered to meet the high-stress demands of track use, these side-mount brackets are constructed from heavy-duty steel to ensure maximum stability and driver safety. The 160mm height profile is specifically designed to provide the necessary clearance and vertical positioning for proper ergonomics in the cockpit.

• Manufactured from high-strength steel for maximum rigidity and durability
• 160mm height specification for specific seat positioning and clearance
• Designed for use with side-mount racing seats
• Durable finish to resist corrosion and wear in harsh racing environments
• Manufacturer Part Number: 96003039

Secure your racing seat with the structural integrity required for competitive track use. The RaceQuip 110mm Steel Seat Mount brackets provide a rigid, reliable foundation for side-mount racing seats, ensuring minimal flex and maximum driver feedback under high G-loads.

These brackets are engineered from heavy-duty steel to withstand the rigors of the cockpit. The 110mm height profile provides a specific vertical baseline, while the series of precision-drilled mounting holes allows for fine-tuning the seat's tilt and height to achieve the optimal driving position. Whether you are bolting directly to the floor or onto seat sliders, these brackets offer the durability and adjustability needed for a professional installation.

• Manufacturer Part Number: 96002029
• Material: Heavy-duty steel for maximum rigidity
• Height: 110mm profile
• Type: Side-mount bracket set
• Multiple mounting points for customizable seat angle and height

Designed for use with off-road bucket seats and multi-point harnesses, the PRP Booster Cushion provides smaller passengers with improved visibility and proper belt positioning. This insert helps ensure the harness shoulder straps and lap belts align correctly across the occupant's body for enhanced safety and comfort during trail rides or racing.

Constructed from high-density foam that maintains its shape over time, the cushion is upholstered in a breathable black tweed fabric to help manage heat and moisture. The two-piece design features a thicker base to lift the passenger and a thinner back pad to maintain a comfortable seating angle without pushing the occupant too far forward.

• Replaces or augments existing seat padding for smaller occupants
• High-density foam construction for consistent support
• Breathable black tweed fabric upholstery
• 3-inch thick bottom pad
• 2-inch thick back pad
• Manufacturer Part Number: H45

Designed for PRP Comp Elite, Podium, and other extra-tall suspension seats, this Protective Vinyl Seat Cover (H30T) shields your interior from UV rays, rain, dust, and debris. While PRP seats are engineered for rugged use, using a dedicated cover during storage or vehicle transport significantly extends the life of the upholstery and foam by preventing environmental degradation.

• Weather-Resistant Vinyl: Constructed from heavy-duty vinyl to block moisture and sun damage.
• Stay-Put Elastic Edge: Features a perimeter elastic band that grips the seat bolsters for a snug, custom-look fit.
• Secure Transport Straps: Integrated hook and loop side straps wrap around your seat belts or PRP harnesses, ensuring the cover stays attached even at highway speeds on an open trailer.
• Extra-Tall Pattern: Specifically cut to accommodate the increased height of Comp Elite and Podium series seats.

Includes one (1) extra-tall seat cover. Fits PRP Comp Elite, Podium, and various extra-tall suspension seat models.