Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
3473 products
3473 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2008 | Audi | A4 | Base |
| 2003-2008 | Audi | A4 | Cabriolet |
| 2002-2008 | Audi | A4 Quattro | Avant |
| 2002-2008 | Audi | A4 Quattro | Base |
| 2004-2008 | Audi | A4 Quattro | Cabriolet |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2008 | Mini | Cooper | Base |
| 2002-2008 | Mini | Cooper | S |
$117.95
$117.95
$117.95
$117.95
$119.95
$117.95
$4,950.47
This ICON Vehicle Dynamics 2.5” suspension system is the best way to level your 4WD 2017-2019 Ford F250/350 Super Duty while drastically improving ride quality and performance. The Stage 5 system is perfect for on-road and off-road use including towing, job site duty, and hardcore off-road adventure. This Stage 5 System combines dual rate coil springs, alignment cams, CDC Valve 2.5 Aluminum Series front remote reservoir and rear piggyback reservoir shocks, an all-new adjustable track bar designed specifically for the 2017-UP Super Duty, and ICON's dual opposing 2.0 Aluminum Series steering stabilizer kit for the ultimate in on-road comfort and off-road performance. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can be rest assured you have the best suspension solution on the market.
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
- Corrosion resistant anodized aluminum shock bodies with 7/8" shafts (2.5 Aluminum Series shocks)
- ICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrain
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- ICON CDC Valve allows quick and easy end user compression adjustability
- FK Rod End bearings provide extended longevity and minimal deflection
- Approximately 25% increased front wheel travel over stock
- Lifetime guarantee against coil spring breakage or sag
- Shocks are fully rebuildable and revalvable
- Fits 2017-2019 F250 / F350 4WD applications
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-250 Super Duty | King Ranch |
| 2017-2021 | Ford | F-250 Super Duty | Lariat |
| 2018-2021 | Ford | F-250 Super Duty | Limited |
| 2017-2021 | Ford | F-250 Super Duty | Platinum |
| 2017-2021 | Ford | F-250 Super Duty | XL |
| 2017-2021 | Ford | F-250 Super Duty | XLT |
| 2017-2021 | Ford | F-350 Super Duty | King Ranch |
| 2017-2021 | Ford | F-350 Super Duty | Lariat |
| 2018-2021 | Ford | F-350 Super Duty | Limited |
| 2017-2021 | Ford | F-350 Super Duty | Platinum |
| 2017-2021 | Ford | F-350 Super Duty | XL |
| 2017-2021 | Ford | F-350 Super Duty | XLT |
$4,825.55
The ICON 2.5” suspension system is a great way to lift your 4WD 2017-2019 Ford F-250/F-350 Super Duty while improving ride quality and performance. This upgraded Stage 4 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. Also included in this stage is ICON's CDC Valve front and rear shocks, for those desiring an easy way to tune the ride externally with 10 settings, from soft to hard. ICON's Stage 4 System is comprised of dual rate coil springs, 2.5 Aluminum Series CDCV remote reservoir front and CDCV piggyback reservoir rear shocks, adjustable front track bar with massive FK rod end, alignment cams for adding caster, and rear leaf spring expansion packs with blocks and U-bolts for a more compliant ride and reduced axle wrap. ICON 2.5" remote reservoir and piggyback reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
- Front and rear shocks equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard
- Vehicle specific tuned remote reservoir front and piggyback reservoir rear 2.5 Aluminum Series shocks
- Increased wheel travel and improved ride quality over stock with no change in towing capacity
- Leaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap
- On-vehicle adjustable track bar for optimum front axle centering and minimal deflection
- ICON engineered dual rate coil springs provide 2.5” of front lift over stock
- 100% Bolt-on system - no drilling, cutting or welding necessary for install
- Application specific alignment Cams ensure proper caster alignment
- Lifetime guarantee that springs won’t sag or break
- Shocks are fully rebuildable and re-tunable
- No drive shaft modifications required
- Less body-roll than stock
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2019 | Ford | F-250 Super Duty | King Ranch |
| 2017-2019 | Ford | F-250 Super Duty | Lariat |
| 2018-2019 | Ford | F-250 Super Duty | Limited |
| 2017-2019 | Ford | F-250 Super Duty | Platinum |
| 2017-2019 | Ford | F-250 Super Duty | XL |
| 2017-2019 | Ford | F-250 Super Duty | XLT |
| 2017-2019 | Ford | F-350 Super Duty | King Ranch |
| 2017-2019 | Ford | F-350 Super Duty | Lariat |
| 2018-2019 | Ford | F-350 Super Duty | Limited |
| 2017-2019 | Ford | F-350 Super Duty | Platinum |
| 2017-2019 | Ford | F-350 Super Duty | XL |
| 2017-2019 | Ford | F-350 Super Duty | XLT |
$3,487.80
This ICON Vehicle Dynamics 2.5” suspension system is a great way to level your 4WD 2017-2019 Ford F250/350 Super Duty while drastically improving ride quality and performance. The Stage 3 system is perfect for on-road and off-road use including towing, job site duty and spirited off-road adventure. ICON's Stage 3 System is comprised of dual rate coil springs, alignment cams, ICON 2.5 Aluminum Series front and rear piggyback reservoir shocks, and an adjustable track bar designed specifically for the 2017-UP Super Duty. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can be rest assured you have the best suspension solution on the market.
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
- ICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrain
- Corrosion resistant, one-piece impact extruded aluminum shock bodies with 7/8" shafts
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- Lifetime guarantee against ICON fabricated component breakage or manufacturer defect
- ICON shocks feature vehicle specific tune for superior performance and ride quality
- FK Rod End bearings provide extended longevity and minimal deflection
- Approximately 25% increased front wheel travel over stock
- Lifetime guarantee against coil spring breakage or sag
- Fits 2017-2019 F250 / F350 4WD applications
- Shocks are fully rebuildable and revalvable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Ford | F-250 Super Duty | King Ranch |
| 2017-2021 | Ford | F-250 Super Duty | Lariat |
| 2018-2021 | Ford | F-250 Super Duty | Limited |
| 2017-2021 | Ford | F-250 Super Duty | Platinum |
| 2017-2021 | Ford | F-250 Super Duty | XL |
| 2017-2021 | Ford | F-250 Super Duty | XLT |
| 2017-2021 | Ford | F-350 Super Duty | King Ranch |
| 2017-2021 | Ford | F-350 Super Duty | Lariat |
| 2018-2021 | Ford | F-350 Super Duty | Limited |
| 2017-2021 | Ford | F-350 Super Duty | Platinum |
| 2017-2021 | Ford | F-350 Super Duty | XL |
| 2017-2021 | Ford | F-350 Super Duty | XLT |
$4,784.84
The ICON 2.5” suspension system is a great way to level your 4WD 2005-2016 Ford F250/350 Super Duty while improving ride quality and performance. This Stage 5 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. Also included in this stage is ICON's CDC Valve front to back for those desiring an easy way to tune the ride externally with 10 settings from soft to hard. ICON's Stage 5 System is comprised of dual rate coil springs, alignment cams for adding caster, adjustable track bar w/ bearing, dual steering stabilizer kit with ICON 2.0 Aluminum Series stabilizers, and ICON 2.5 Aluminum Series remote reservoir shocks front and rear w/ CDCV. ICON 2.5" reservoir shocks ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.
Installation InstructionsInstallation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
- Corrosion resistant anodized aluminum shock bodies with 7/8" shafts (2.5 Aluminum Series shocks)
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Adjustable trackbar for optimum front axle centering and minimizing deflection
- ICON engineered dual rate coil springs with match tuned performance shocks
- Dual steering stabilizer kit for smooth wheel control while driving
- Application Specific Alignment Cams ensure proper Caster alignment
- 100% Bolt-on system -no cutting or welding necessary for install
- Remote reservoir with easy to adjust compression tune-ability
- Lifetime guarantee that coil springs won’t sag
- No drive shaft modifications required
- Less body-roll than stock
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Ford | F-250 Super Duty | Cabela's |
| 2008-2009 | Ford | F-250 Super Duty | FX4 |
| 2005-2010 | Ford | F-250 Super Duty | Harley-Davidson Edition |
| 2005-2016 | Ford | F-250 Super Duty | King Ranch |
| 2005-2016 | Ford | F-250 Super Duty | Lariat |
| 2013-2016 | Ford | F-250 Super Duty | Platinum |
| 2005-2016 | Ford | F-250 Super Duty | XL |
| 2005-2016 | Ford | F-250 Super Duty | XLT |
| 2009-2010 | Ford | F-350 Super Duty | Cabela's |
| 2008-2009 | Ford | F-350 Super Duty | FX4 |
| 2005-2010 | Ford | F-350 Super Duty | Harley-Davidson Edition |
| 2005-2016 | Ford | F-350 Super Duty | King Ranch |
| 2005-2016 | Ford | F-350 Super Duty | Lariat |
| 2013-2016 | Ford | F-350 Super Duty | Platinum |
| 2005-2016 | Ford | F-350 Super Duty | XL |
| 2005-2016 | Ford | F-350 Super Duty | XLT |
$308.95
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off-road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Installation Instructions- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- Nitrogen charged monotube design with remote reservoir
- Nitrile rubber top out bumper for noise free operation
- Application-specific reservoir mounting hardware
- 100% revalveable
- 100% rebuildable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2015 | Toyota | Tacoma | Base |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2005-2015 | Toyota | Tacoma | Pre Runner |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2023 | Toyota | Tacoma | Trail Special Edition |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2015,2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2005-2013 | Toyota | Tacoma | X-Runner |
$44.64
$836.80
The Hotchkis Tuned 1.5 Street Performance Series shock absorbers manufactured by Fox have been specifically tuned by Hotchkis ride engineers brining a smooth ride and exceptional control to your 1964-1972 GM A Body Chevelle Malibu GTO El Camino . The Hotchkis 1.5 Street Performance Series shock absorbers feature the latest cutting edge mono tube shock technology in a lightweight smooth-bore Type III hard anodized aluminum body. The shocks feature smooth riding digressive disc technology a high-flow piston specially formulated oil and high pressure nitrogen for consistent performance under varying conditions and temperatures. Each shock is application tuned to offer superior ride comfort as well as vehicle control. For years of durability the 1.5 SPS shock features 1/2" hard chrome plated heat treated alloy shaft subjected to 100 hour salt spray testing. To prevent contaminants from entering the shock the rod guide employs a wiper/scraper dual seal which cleans the shaft before reaching the main seal. End caps are black anodized 6061-T6 billet aluminum and feature polyurethane bushings. CNC machined cross bars and vehicle specific mounting hardware makes these shocks a direct replacement for OE. Bolt a pair on today and feel the difference.
Certificate of OriginMaterial Safety Data Sheet
Warranty
- Proudly Made In The USA With A Lifetime Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1970,1972 | Buick | Skylark | 350 |
| 1964-1972 | Buick | Skylark | Base |
| 1968-1972 | Buick | Skylark | Custom |
| 1964-1968 | Chevrolet | Chevelle | 300 |
| 1965-1969 | Chevrolet | Chevelle | 300 Deluxe |
| 1970-1972 | Chevrolet | Chevelle | Base |
| 1967-1972 | Chevrolet | Chevelle | Concours |
| 1969-1972 | Chevrolet | Chevelle | Concours Estate |
| 1969-1972 | Chevrolet | Chevelle | Greenbrier |
| 1964-1972 | Chevrolet | Chevelle | Malibu |
| 1964-1965 | Chevrolet | Chevelle | Malibu Super Sport |
| 1968-1972 | Chevrolet | Chevelle | Nomad |
| 1968 | Chevrolet | Chevelle | Nomad Custom |
| 1971-1972 | Chevrolet | Chevelle | SS |
| 1967-1970 | Chevrolet | Chevelle | SS 396 |
| 1966 | Chevrolet | Chevelle | Super Sport 396 |
| 1964-1972 | Chevrolet | El Camino | Base |
| 1968-1972 | Chevrolet | El Camino | Custom |
| 1968-1972 | Chevrolet | El Camino | SS |
| 1970-1972 | Chevrolet | Monte Carlo | Base |
| 1964-1971 | Oldsmobile | 442 | Base |
| 1964-1972 | Oldsmobile | Cutlass | Base |
| 1972 | Oldsmobile | Cutlass | Cruiser |
| 1964-1967 | Oldsmobile | Cutlass | Holiday |
| 1968,1971-1972 | Oldsmobile | Cutlass | S |
| 1967 | Oldsmobile | Cutlass | Turnpike Cruiser |
| 1967-1972 | Oldsmobile | Cutlass Supreme | Base |
| 1964-1972 | Oldsmobile | F85 | Base |
| 1964-1966 | Oldsmobile | F85 | Deluxe |
| 1966 | Oldsmobile | F85 | Holiday |
| 1964-1972 | Oldsmobile | Vista Cruiser | Base |
| 1964-1967 | Oldsmobile | Vista Cruiser | Custom |
| 1964-1972 | Pontiac | GTO | Base |
| 1970-1971 | Pontiac | GTO | The Judge |
| 1964-1972 | Pontiac | LeMans | Base |
| 1972 | Pontiac | LeMans | Luxury |
| 1969-1970,1973 | Pontiac | LeMans | Safari |
| 1970-1972 | Pontiac | LeMans | Sport |
| 1971 | Pontiac | LeMans | T37 |
| 1964-1970 | Pontiac | Tempest | Base |
| 1964-1969 | Pontiac | Tempest | Custom |
| 1963-1965,1968-1969 | Pontiac | Tempest | Safari |
$346.95
Increase your vehicle's off-road capability by extending drop-out travel in most applications. Experience on-road comfort with performance-minded shock valving for a connected ride with less vehicle sway. Tuned specifically for your vehicle’s application._x000D__x000D__x000D__x000D_Consistent and fade-resistant performance due to high-quality materials: aluminum bodies, race-developed main piston, and a true internal floating piston (IFP) to separate gas and oil._x000D__x000D__x000D__x000D_Built-to-last, torture-tested and race-proven to give a lifetime of great rides. FOX products are built from aluminum, dissipating heat four times better than conventional materials. All FOX shocks are fully serviceable and resistant to corrosion and harsh environments.
Installation Instructions- 2.5” Impact extruded 6061-T6 aluminum shock body
- High-flow velocity-sensitive damping
- Type II clear-anodized body plating
- Fully rebuildable and re-tunable
- Internal floating piston (IFP)
- Application specific tune
- 5/8” hard chrome shaft
- Corrosion resistant
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2025 | Ford | F-150 | King Ranch |
| 2015-2025 | Ford | F-150 | Lariat |
| 2016-2023 | Ford | F-150 | Limited |
| 2015-2025 | Ford | F-150 | Platinum |
| 2018-2025 | Ford | F-150 | Police Responder |
| 2017-2025 | Ford | F-150 | Raptor |
| 2016-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2015-2025 | Ford | F-150 | XL |
| 2015-2025 | Ford | F-150 | XLT |
$346.95
Increase your vehicle's off-road capability by extending drop-out travel in most applications. Experience on-road comfort with performance-minded shock valving for a connected ride with less vehicle sway. Tuned specifically for your vehicle’s application._x000D__x000D__x000D__x000D_Consistent and fade-resistant performance due to high-quality materials: aluminum bodies, race-developed main piston, and a true internal floating piston (IFP) to separate gas and oil._x000D__x000D__x000D__x000D_Built-to-last, torture-tested and race-proven to give a lifetime of great rides. FOX products are built from aluminum, dissipating heat four times better than conventional materials. All FOX shocks are fully serviceable and resistant to corrosion and harsh environments.
Installation Instructions- 2.5 in. Impact Extruded 6061-T6 Aluminum Shock Body
- 2.5” Impact extruded 6061-T6 aluminum shock body
- High-flow velocity-sensitive damping
- Type II clear-anodized body plating
- Fully rebuildable and re-tunable
- Internal floating piston (IFP)
- Hydraulic Top Out (HTO) piston
- Internal Floating Piston [IFP]
- Hydraulic Top Out [HTO] Piston
- Application specific tune
- 5/8 in. Hard Chrome Shaft
- 5/8” hard chrome shaft
- Corrosion resistant
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2019 | Chevrolet | Silverado 2500 HD | High Country |
| 2011-2019 | Chevrolet | Silverado 2500 HD | LT |
| 2011-2019 | Chevrolet | Silverado 2500 HD | LTZ |
| 2011-2019 | Chevrolet | Silverado 2500 HD | WT |
| 2015-2019 | Chevrolet | Silverado 3500 HD | High Country |
| 2011-2019 | Chevrolet | Silverado 3500 HD | LT |
| 2011-2019 | Chevrolet | Silverado 3500 HD | LTZ |
| 2011-2019 | Chevrolet | Silverado 3500 HD | WT |
| 2015-2019 | GMC | Sierra 2500 HD | Base |
| 2011-2019 | GMC | Sierra 2500 HD | Denali |
| 2011-2019 | GMC | Sierra 2500 HD | SLE |
| 2011-2019 | GMC | Sierra 2500 HD | SLT |
| 2011-2014 | GMC | Sierra 2500 HD | WT |
| 2015-2019 | GMC | Sierra 3500 HD | Base |
| 2011-2019 | GMC | Sierra 3500 HD | Denali |
| 2011-2019 | GMC | Sierra 3500 HD | SLE |
| 2011-2019 | GMC | Sierra 3500 HD | SLT |
| 2011-2014 | GMC | Sierra 3500 HD | WT |
$346.95
Increase your vehicle's off-road capability by extending drop-out travel in most applications. Experience on-road comfort with performance-minded shock valving for a connected ride with less vehicle sway. Tuned specifically for your vehicle’s application._x000D__x000D__x000D__x000D_Consistent and fade-resistant performance due to high-quality materials: aluminum bodies, race-developed main piston, and a true internal floating piston (IFP) to separate gas and oil._x000D__x000D__x000D__x000D_Built-to-last, torture-tested and race-proven to give a lifetime of great rides. FOX products are built from aluminum, dissipating heat four times better than conventional materials. All FOX shocks are fully serviceable and resistant to corrosion and harsh environments.
Installation Instructions- 2.5 in. Impact Extruded 6061-T6 Aluminum Shock Body
- 2.5” Impact extruded 6061-T6 aluminum shock body
- High-flow velocity-sensitive damping
- Type II clear-anodized body plating
- Fully rebuildable and re-tunable
- Internal floating piston (IFP)
- Hydraulic Top Out (HTO) piston
- Internal Floating Piston [IFP]
- Hydraulic Top Out [HTO] Piston
- Application specific tune
- 5/8 in. Hard Chrome Shaft
- 5/8” hard chrome shaft
- Corrosion resistant
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2025 | Ram | 2500 | Big Horn |
| 2014-2025 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2014-2021 | Ram | 2500 | Laramie Longhorn |
| 2016-2025 | Ram | 2500 | Limited |
| 2021-2025 | Ram | 2500 | Limited Longhorn |
| 2014-2015,2019-2025 | Ram | 2500 | Lone Star |
| 2014-2016 | Ram | 2500 | Outdoorsman |
| 2014-2025 | Ram | 2500 | Power Wagon |
| 2023-2025 | Ram | 2500 | Rebel |
| 2014-2018 | Ram | 2500 | SLT |
| 2024-2025 | Ram | 2500 | Special Service |
| 2014-2025 | Ram | 2500 | Tradesman |
$8,495.95
Whether on the daily commute, wet switchbacks or desert whoops, Live Valve takes the guesswork out of your Tacoma suspension. Live Valve monitors terrain and your driver inputs 400 times a second, adapting your truck's suspension for the perfect tune, in every moment. By controlling damping at all four corners of the vehicle in all driving situations and environments, you’ll always have the best-feeling suspension whether on pavement, gravel road, rock crawling and everything in between.
- Performance Tuned For Vehicle Specific Application
- Black Anodized CNC Machined Aluminum Components
- External Reservoir System Dissipates Heat Fast
- Durable Zinc Plated Seamless Alloy Body
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024 | Toyota | Tacoma | Limited |
| 2024 | Toyota | Tacoma | SR |
| 2024 | Toyota | Tacoma | SR5 |
| 2024 | Toyota | Tacoma | Trailhunter |
| 2024 | Toyota | Tacoma | TRD Off-Road |
| 2024 | Toyota | Tacoma | TRD PreRunner |
| 2024 | Toyota | Tacoma | TRD Pro |
| 2024 | Toyota | Tacoma | TRD Sport |
$815.00
Designed Specifically As Part Of The Track Handling Pack As Well As For Use With Track Lowering Springs. Track Tuned By Ford Performance Engineers.
- Designed For Use With Track Lowering Springs
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2023 | Ford | Mustang | EcoBoost |
| 2015-2017 | Ford | Mustang | EcoBoost Premium |
| 2015-2023 | Ford | Mustang | GT |
| 2015 | Ford | Mustang | GT 50 Years Limited Edition |
| 2015-2017 | Ford | Mustang | GT Premium |
| 2017 | Ford | Mustang | Shelby GT350 |
| 2017 | Ford | Mustang | Shelby GT350R |
| 2017 | Ford | Mustang | V6 |
Eibach's PRO-TRUCK SPORT SHOCKS' mono-tube design delivers improved control and damping performance on-and-off road.
WarrantyInstallation Instructions
- Performance Shock Absorber - Precision Engineered for Street and Off-Road Performance.
- Monotube-High Pressure Design, Heavy Duty 46mm Piston, Nitro Coated Shaft.
- Adjustable Spring Perch Design for Lifting/Leveling front of vehicle.
- Durable, Zinc Coated, Weather Resistant Shock Bodies.
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | King Ranch |
| 2021-2025 | Ford | F-150 | Lariat |
| 2021-2023 | Ford | F-150 | Limited |
| 2021-2025 | Ford | F-150 | Platinum |
| 2021-2025 | Ford | F-150 | Police Responder |
| 2021-2025 | Ford | F-150 | Raptor |
| 2021-2025 | Ford | F-150 | SSV |
| 2024-2025 | Ford | F-150 | STX |
| 2021-2025 | Ford | F-150 | Tremor |
| 2021-2025 | Ford | F-150 | XL |
| 2021-2025 | Ford | F-150 | XLT |
Eibach's PRO-TRUCK SPORT SHOCKS' mono-tube design delivers improved control and damping performance on-and-off road.
WarrantyInstallation Instructions
- Performance Shock Absorber - Precision Engineered for Street and Off-Road Performance.
- Monotube-High Pressure Design, Heavy Duty 46mm Piston, Nitro Coated Shaft.
- Durable, Zinc Coated, Weather Resistant Shock Bodies.
- Can accommodate Lifted Suspensions 0-2".
- Made in U.S.A.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014 | Ford | F-150 | FX2 |
| 2014 | Ford | F-150 | FX4 |
| 2014-2020 | Ford | F-150 | King Ranch |
| 2014-2020 | Ford | F-150 | Lariat |
| 2014,2016-2020 | Ford | F-150 | Limited |
| 2014-2020 | Ford | F-150 | Platinum |
| 2018-2020 | Ford | F-150 | Police Responder |
| 2017-2020 | Ford | F-150 | Raptor |
| 2016-2020 | Ford | F-150 | SSV |
| 2014 | Ford | F-150 | STX |
| 2014 | Ford | F-150 | SVT Raptor |
| 2014-2020 | Ford | F-150 | XL |
| 2014-2020 | Ford | F-150 | XLT |
Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
Installation InstructionsWarranty
Catalog
Material Safety Data Sheet
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Patented digressive valving instantly reacts to changing surface conditions
- Vehicle specific tuning
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Wrangler | 80th Anniversary |
| 2021,2023 | Jeep | Wrangler | Freedom |
| 2023 | Jeep | Wrangler | High Altitude |
| 2023-2025 | Jeep | Wrangler | High Altitude 4xe |
| 2023 | Jeep | Wrangler | High Tide |
| 2021 | Jeep | Wrangler | Islander |
| 2018-2026 | Jeep | Wrangler | Rubicon |
| 2023-2024 | Jeep | Wrangler | Rubicon 392 |
| 2024 | Jeep | Wrangler | Rubicon 392 Final Edition |
| 2023-2025 | Jeep | Wrangler | Rubicon 4xe |
| 2024-2026 | Jeep | Wrangler | Rubicon X |
| 2024-2025 | Jeep | Wrangler | Rubicon X 4xe |
| 2023-2025 | Jeep | Wrangler | Sahara |
| 2023-2025 | Jeep | Wrangler | Sahara 4xe |
| 2023 | Jeep | Wrangler | Sahara Altitude |
| 2018-2026 | Jeep | Wrangler | Sport |
| 2023 | Jeep | Wrangler | Sport Altitude |
| 2018-2026 | Jeep | Wrangler | Sport S |
| 2024-2025 | Jeep | Wrangler | Sport S 4xe |
| 2021 | Jeep | Wrangler | Unlimited 80th Anniversary |
| 2021 | Jeep | Wrangler | Unlimited Freedom |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude |
| 2021-2022 | Jeep | Wrangler | Unlimited High Altitude 4xe |
| 2022 | Jeep | Wrangler | Unlimited High Tide |
| 2021 | Jeep | Wrangler | Unlimited Islander |
| 2018-2019 | Jeep | Wrangler | Unlimited Moab |
| 2018-2022 | Jeep | Wrangler | Unlimited Rubicon |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 392 |
| 2021-2022 | Jeep | Wrangler | Unlimited Rubicon 4xe |
| 2018-2022 | Jeep | Wrangler | Unlimited Sahara |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara 4xe |
| 2021-2022 | Jeep | Wrangler | Unlimited Sahara Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport |
| 2021-2022 | Jeep | Wrangler | Unlimited Sport Altitude |
| 2018-2022 | Jeep | Wrangler | Unlimited Sport S |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys |
| 2021-2022 | Jeep | Wrangler | Unlimited Willys Sport |
| 2021-2026 | Jeep | Wrangler | Willys |
| 2024-2025 | Jeep | Wrangler | Willys 4xe |
| 2021-2024 | Jeep | Wrangler | Willys Sport |
$6.48
$54.95
Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features with the special Fluon-banded piston and this shock is built to perform! Shock absorbers are sold individually and include bushings/sleeves.
Installation Instructions- Twin tube, nitrogen charged design with 10-stage velocity sensitive valving for great on/off-road performance
- Steel alloy body with dual welded ends and a 14mm heavy chromed shock shaft
- Bushings and sleeves included for easy, direct replacement installation
- Shock absorbers are sold individually
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1984-1993 | Jeep | Cherokee | Base |
| 1991-1992 | Jeep | Cherokee | Briarwood |
| 1985-1988 | Jeep | Cherokee | Chief |
| 1996,1998-2001 | Jeep | Cherokee | Classic |
| 1993-1997 | Jeep | Cherokee | Country |
| 1985-1992 | Jeep | Cherokee | Laredo |
| 1987-1992,1998-2001 | Jeep | Cherokee | Limited |
| 1985-1990 | Jeep | Cherokee | Pioneer |
| 1994-2001 | Jeep | Cherokee | SE |
| 1989-2001 | Jeep | Cherokee | Sport |
| 2006 | Jeep | Wrangler | 65th Anniversary Edition |
| 2003-2006 | Jeep | Wrangler | Rubicon |
| 1997-2004 | Jeep | Wrangler | Sahara |
| 1997-2006 | Jeep | Wrangler | SE |
| 1997-2006 | Jeep | Wrangler | Sport |
| 2004-2006 | Jeep | Wrangler | Unlimited |
| 2005-2006 | Jeep | Wrangler | Unlimited Rubicon |
| 2002-2006 | Jeep | Wrangler | X |
$54.95
Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features with the special Fluon-banded piston and this shock is built to perform! Shock absorbers are sold individually and include bushings/sleeves.
Installation Instructions- Twin tube, nitrogen charged design with 10-stage velocity sensitive valving for great on/off-road performance
- Steel alloy body with dual welded ends and a 14mm heavy chromed shock shaft
- Bushings and sleeves included for easy, direct replacement installation
- Shock absorbers are sold individually
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999-2004 | Jeep | Grand Cherokee | Laredo |
| 1999-2004 | Jeep | Grand Cherokee | Limited |
| 2002-2004 | Jeep | Grand Cherokee | Overland |
| 2004 | Jeep | Grand Cherokee | Special Edition |
| 2002 | Jeep | Grand Cherokee | Sport |
$54.95
Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features with the special Fluon-banded piston and this shock is built to perform! Shock absorbers are sold individually and include bushings/sleeves.
Installation Instructions- Twin tube, nitrogen charged design with 10-stage velocity sensitive valving for great on/off-road performance
- Steel alloy body with dual welded ends and a 14mm heavy chromed shock shaft
- Bushings and sleeves included for easy, direct replacement installation
- Shock absorbers are sold individually
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999-2004 | Jeep | Grand Cherokee | Laredo |
| 1999-2004 | Jeep | Grand Cherokee | Limited |
| 2002-2004 | Jeep | Grand Cherokee | Overland |
| 2004 | Jeep | Grand Cherokee | Special Edition |
| 2002 | Jeep | Grand Cherokee | Sport |
$54.95
Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features with the special Fluon-banded piston and this shock is built to perform! Shock absorbers are sold individually and include bushings/sleeves.
Installation Instructions- Twin tube, nitrogen charged design with 10-stage velocity sensitive valving for great on/off-road performance
- Steel alloy body with dual welded ends and a 14mm heavy chromed shock shaft
- Bushings and sleeves included for easy, direct replacement installation
- Shock absorbers are sold individually
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1984-1993 | Jeep | Cherokee | Base |
| 1991-1992 | Jeep | Cherokee | Briarwood |
| 1985-1988 | Jeep | Cherokee | Chief |
| 1996,1998-2001 | Jeep | Cherokee | Classic |
| 1993-1997 | Jeep | Cherokee | Country |
| 1985-1992 | Jeep | Cherokee | Laredo |
| 1987-1992,1998-2001 | Jeep | Cherokee | Limited |
| 1985-1990 | Jeep | Cherokee | Pioneer |
| 1994-2001 | Jeep | Cherokee | SE |
| 1989-2001 | Jeep | Cherokee | Sport |
| 1987-1992 | Jeep | Comanche | Base |
| 1987-1988 | Jeep | Comanche | Chief |
| 1986 | Jeep | Comanche | Custom |
| 1988-1992 | Jeep | Comanche | Eliminator |
| 1987-1988 | Jeep | Comanche | Laredo |
| 1987-1992 | Jeep | Comanche | Pioneer |
| 1986 | Jeep | Comanche | X |
| 1986 | Jeep | Comanche | XLS |
| 1998 | Jeep | Grand Cherokee | 5.9 Limited |
| 1993 | Jeep | Grand Cherokee | Base |
| 1993-1998 | Jeep | Grand Cherokee | Laredo |
| 1993-1998 | Jeep | Grand Cherokee | Limited |
| 1995,1997 | Jeep | Grand Cherokee | Orvis |
| 1994-1995 | Jeep | Grand Cherokee | SE |
| 1997-1998 | Jeep | Grand Cherokee | TSi |
| 2006 | Jeep | Wrangler | 65th Anniversary Edition |
| 2003-2006 | Jeep | Wrangler | Rubicon |
| 1997-2004 | Jeep | Wrangler | Sahara |
| 1997-2006 | Jeep | Wrangler | SE |
| 1997-2006 | Jeep | Wrangler | Sport |
| 2004-2006 | Jeep | Wrangler | Unlimited |
| 2005-2006 | Jeep | Wrangler | Unlimited Rubicon |
| 2002-2006 | Jeep | Wrangler | X |
$54.95
Zone Nitro Series shock absorber offers stock-like control and performance with fully displaced valving for improved compression and extension travel. This vehicle specific valving is pressurized with 50 psi nitrogen gas; this gas charge ensures split second response and reduced aeration. Combine these features with the special Fluon-banded piston and this shock is built to perform! Shock absorbers are sold individually and include bushings/sleeves.
- Twin tube, nitrogen charged design with 10-stage velocity sensitive valving for great on/off-road performance
- Steel alloy body with dual welded ends and a 14mm heavy chromed shock shaft
- Bushings and sleeves included for easy, direct replacement installation
- Shock absorbers are sold individually
Showing 120/3473
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.