Fits 2013-2018 Ram 2500 and 3500 models equipped with the 6.7L Cummins diesel engine.

The Banks Power Monster-Ram Gen-2 Intake System (42798-B) is engineered to solve a critical factory weakness while significantly improving airflow. On stock 6.7L engines, the factory grid heater is prone to failure, which can lead to severe internal engine damage. This system replaces the restrictive factory intake plate and grid heater with a high-flow Monster-Ram elbow and a reliable, high-flow coil heater. This design eliminates the risk of heater bolt failure and optimizes air pressure distribution across all cylinders.

By removing these factory bottlenecks, the Monster-Ram Gen-2 outflows the stock assembly by 88.3%. This results in quicker throttle response and better fuel efficiency without increasing turbine drive pressure. The kit includes a proprietary fuel line and all necessary hardware for a complete installation on factory mounting points. This system is 50-state emissions-compliant.

• Outflows factory intake by 88.3%
• Large 3-3/8 inch inlet for maximum volume
• Includes Banks high-flow coil heater to replace failure-prone stock grid heater
• Four 1/8 inch NPT ports for easy sensor or injection installation
• Includes proprietary fuel line and installation hardware
• Durable black finish
• Manufacturer Part Number: 42798-B

Fits select 2013-2018 Ram 2500 and 3500 models (6.7L).

The Banks Power Gen-2 Monster-Ram Intake System (MPN 42798) is a heavy-duty performance upgrade engineered to eliminate the catastrophic risk of factory grid heater bolt failure in the 6.7L Cummins engine. By replacing the restrictive factory intake plate and heater with the Banks high-flow coil heater, this system provides insurance against engine damage while significantly improving airflow and throttle response.

This system features a massive 3-3/8 inch inlet that outflows the stock intake by 88.3%. This increased capacity optimizes air pressure and distribution across the cylinders, allowing for higher boost levels without a corresponding increase in turbine drive pressure. The kit is dual-heat capable and comes in a natural finish, including the necessary proprietary fuel line and four 1/8-inch NPT ports for additional sensors or injection nozzles.

• Outflows factory intake system by over 88.3% for improved volumetric efficiency
• Replaces failure-prone factory grid heater with Banks high-flow coil heater
• Large 3-3/8 inch inlet with four 1/8 inch NPT ports for auxiliary sensors
• 50-state emissions compliant design
• Accommodates stock mounting points for a direct-fit installation
• Includes proprietary fuel line and all required hardware
• Manufacturer Part Number: 42798

Fits select 2007-2012 Dodge and Ram 2500/3500 models (6.7L).

The Banks Power Monster-Ram Intake System Gen-2 (MPN: 42797-PC) is engineered to eliminate the airflow restrictions found in the factory 6.7L Cummins intake. This system provides critical engine protection by replacing the failure-prone factory grid heater with the Banks high-flow intake plate and coil heater, preventing the "killer bolt" failure that can cause catastrophic internal damage. By optimizing air pressure and distribution, the Monster-Ram improves throttle response and fuel efficiency while raising boost without increasing turbine drive pressure.

Construction features a massive 3-3/8 inch inlet and four integrated 1/8 inch NPT ports for accessories. This 50-state emissions-compliant system outflows the stock intake by 88.3% and comes finished in a durable red powder coat. The kit includes a proprietary high-pressure fuel line and all necessary hardware for a direct installation onto factory mounting points.

• Outflows factory intake elbow by 88.3%
• Prevents engine damage caused by stock grid heater bolt failure
• Large 3-3/8 inch inlet diameter for maximum airflow
• Four 1/8 inch NPT ports for sensors or injection nozzles
• Includes Banks high-flow coil heater and proprietary fuel line
• Patent-pending design, 50-state emissions compliant
• Manufacturer Part Number: 42797-PC

Fits 2007-2012 Dodge and Ram 2500/3500 (6.7L Cummins).

The Banks Power Monster-Ram Gen-2 Intake System is a performance-engineered solution for the 6.7L Cummins, designed to eliminate airflow restrictions and protect your engine from catastrophic failure. This system replaces the restrictive factory intake elbow and the failure-prone factory grid heater. By swapping the OE heater with the included Banks high-flow coil heater and intake plate, you eliminate the risk of the "killer" grid heater bolt falling into the intake tract while significantly improving throttle response and fuel efficiency.

This Gen-2 Monster-Ram outflows the stock unit by over 88.3%, optimizing air pressure and distribution across all cylinders. The larger 3-3/8 inch inlet reduces turbine drive pressure, allowing for higher boost levels without overworking the turbocharger. This kit is dual heat capable and includes the proprietary fuel line and hardware required for a seamless installation using factory mounting points.

• Outflows stock intake by 88.3% for better throttle response
• Prevents engine damage by replacing failure-prone OE grid heater
• Includes Banks High-flow coil heater and proprietary fuel line
• 3-3/8 inch inlet diameter for maximum airflow
• Four 1/8 inch NPT ports for auxiliary sensors or injection nozzles
• 50-state emissions compliant design
• Manufacturer Part Number: 42797-B

Fits select 2007-2012 Dodge/Ram 2500 and 3500 models equipped with the 6.7L Cummins engine.

The Banks Power Monster-Ram Gen-2 is a high-performance intake manifold designed to eliminate the most significant airflow bottleneck on the 6.7L Cummins engine. By replacing the restrictive factory intake elbow and the failure-prone factory grid heater, this system significantly improves throttle response and engine protection. This kit features a natural finish and includes the Banks high-flow coil heater and a proprietary fuel line for a complete installation.

The centerpiece of this system is the high-flow intake plate, which eliminates the risk of the factory grid heater bolt backing out and falling into the engine—a common cause of catastrophic failure. The Gen-2 Monster-Ram outflows the stock assembly by over 88.3%, optimizing air pressure distribution and raising boost levels without increasing turbine drive pressure.

• Outflows stock intake assembly by over 88.3%
• Prevents engine damage by replacing the factory grid heater with a high-flow plate
• 3-3/8 inch inlet for maximum air volume
• Includes four 1/8 inch NPT ports for sensors, boost gauges, or injection nozzles
• 50-state emissions compliant for street use
• Natural cast finish for a clean, rugged look
• Includes proprietary fuel line, high-flow coil heater, and all necessary mounting hardware
• Manufacturer Part Number: 42797

Fits select 2017-2026 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD trucks (6.6L Duramax L5P).

The Banks Power Monster-Ram Turbo Inlet Elbow is engineered to eliminate the restrictive factory intake pipe, significantly improving air density to the compressor. By increasing the intake volume, this cast aluminum elbow reduces turbo shaft speed and decreases the time to boost, resulting in sharper throttle response and extended turbocharger life. Unlike some aftermarket options that can cause destructive turbo surge, the Monster-Ram is precision-developed to maintain stable airflow while providing an 18.7% reduction in restriction compared to the stock unit.

This "Natural" finish version is made of high-quality cast aluminum and is ideal for owners looking to apply their own custom powder coating or paint. It retains the factory PCV geometry for a straightforward installation that remains 50-state emissions compliant.

• Manufacturer Part Number: 42792-N
• CARB EO: D-161-158 (50-State Emission Compliant)
• 18.7% less restrictive than the factory inlet
• 11.9% increase in mass air flow over stock
• 17% larger turbo inlet size with 23% greater Gulp Capacity
• 11% lower turbo drive pressure for improved efficiency
• Includes all necessary hardware for installation
• Retains factory PCV system geometry

Fits 2003-2007 Dodge Ram 2500 and 3500 models equipped with the 5.9L Cummins diesel engine.

The Banks Power Monster-Ram (MPN: 42766) is engineered to eliminate the airflow restrictions found in the factory intake elbow. By improving the transition from the intercooler to the intake manifold, this system raises boost pressure by 1.23 PSI over stock without increasing turbine backpressure. This results in improved throttle response, increased air density, and better fuel efficiency for your Cummins-powered Ram.

The 3.5-inch mandrel-bent boost tube is specifically designed to work with the larger Monster-Ram housing, providing a high-flow path for pressurized air. The intake elbow features six 1/8-inch NPT ports, allowing for easy installation of pressure/temperature sensors or water-methanol/nitrous injection systems. Each unit is CNC port-matched to ensure a precise transition to the stock heater grid or a Banks Billet Heater Delete.

• Replaces restrictive factory intake elbow and boost tube
• High-flow 3.5-inch mandrel-bent construction
• Includes six 1/8-inch NPT ports for system expandability
• Increases boost by up to 1.23 PSI vs. stock
• CNC port-matched for optimized internal airflow
• Out-boosts competitors by up to 56.9%
• Manufacturer Part Number: 42766

Fits 2003-2007 Dodge Ram 2500 and 3500 trucks (5.9L Cummins).

The Banks Power Monster-Ram Intake System is engineered to eliminate the airflow restrictions found in the factory intake elbow. By replacing the stock component with a larger, 3.5-inch mandrel-bent unit, this system improves airflow from the intercooler to the cylinders. This efficiency gain allows for a boost increase of 1.23 PSI over stock without raising turbine backpressure, resulting in improved throttle response and engine efficiency.

Built for performance expandability, the Monster-Ram features six 1/8-inch NPT ports for easy installation of gauges, water-methanol injection, or nitrous systems. The base is CNC port-matched to work seamlessly with the stock heater or the Banks Billet Heater Delete, ensuring a smooth transition into the manifold. This system is designed for use with the factory intercooler and utilizes the OEM boost tube for a straightforward installation.

• Manufacturer Part Number: 42765
• Increases boost by 1.23 PSI over factory intake
• 3.5-inch high-flow mandrel-bent design
• Includes six 1/8-inch NPT ports for sensors and injection
• CNC port-matched for stock heater compatibility
• Compatible with OEM boost tube and stock intercooler

Fits 1998-2002 Dodge Ram 2500 and 3500 (5.9L).

The Banks Power Monster-Ram Intake is engineered to optimize engine breathing by reducing the restrictive flow path of the factory intake. This direct-replacement casting increases boost by 1.23 PSI over stock without raising turbine backpressure, resulting in quicker throttle response and improved fuel efficiency. By delivering cooler, denser air to the engine, the Monster-Ram provides a foundation for increased power and performance.

The kit includes a 3.5-inch mandrel-bent boost tube to maximize airflow from the intercooler. The intake manifold itself is equipped with six 1/8-inch NPT ports, offering extensive expandability for pressure, temperature, or flow sensors. Each unit is CNC port-matched to the factory intake heater to ensure a seamless transition and zero-restriction flow.

• Increases boost by 1.23 PSI compared to the stock intake
• Includes high-flow 3.5-inch mandrel-bent boost tube
• Six 1/8-inch NPT ports for sensors and performance monitoring
• CNC port-matched to the stock intake heater
• Improves airflow from the intercooler for denser air intake
• Manufacturer Part Number: 42764

Fits 2019-2024 Ram 2500 and 3500 trucks (6.7L).

The Banks Ram-Air Intake System is engineered to optimize airflow and density for your Cummins-powered Ram. By providing cooler, denser air to the turbocharger, this system reduces the workload on the turbo compressor, allowing it to maintain boost targets at lower speeds. This reduction in parasitic drag frees up horsepower and improves overall engine efficiency, resulting in sharper throttle response and better fuel economy.

The 42279-D kit features a fully enclosed housing designed to isolate the filter from power-robbing engine bay heat while promoting uniform air distribution. The system integrates seamlessly with the factory ram-air scoop to maximize intake pressure. Equipped with a high-capacity dry filter, this system offers superior filtration and extended service intervals without the need for filter oil.

• Direct fit for 2019-2024 Ram 2500/3500 (6.7L Cummins)
• Large-surface dry filter for maximum airflow and easy maintenance
• Enclosed housing maintains cool intake temperatures
• Reduces turbo lag and improves induction sound
• 50-state emissions compliant
• Mates to OEM ram-air scoop
• Manufacturer Part Number: 42279-D
• Includes 5-year Limited Warranty

Fits 2019-2024 Ram 2500 and 3500 models equipped with the 6.7L Cummins Turbo Diesel engine.

The Banks Power Ram-Air Intake System (MPN: 42279) is engineered to optimize engine efficiency by delivering cooler, denser air to the turbocharger. By reducing airflow restrictions found in the factory intake, this system allows the turbo to maintain target boost levels at lower compressor speeds. This reduction in work unloads the turbine, reclaiming horsepower and improving throttle response across the RPM range. The enclosed housing is specifically designed to isolate the filter from engine bay heat while promoting uniform air distribution around the entire element.

• Mates directly to the factory OEM ram-air scoop for maximum induction efficiency
• High-flow oiled filter provides superior filtration and extended service intervals
• Fully enclosed housing protects against power-robbing heat soak
• Delivers a more aggressive turbo and induction sound
• 50-state emissions compliant (CARB legal)
• Simple bolt-on installation with no check engine lights
• Includes a 5-year Limited Warranty

Fits 2020-2023 Chevrolet Silverado and GMC Sierra 2500/3500 HD (6.6L L5P Duramax).

Unlock the performance potential of your L5P Duramax with the Banks Power Ram-Air Intake System. Modern GM induction tuning has narrow tolerance ranges, which typically limits aftermarket intake diameter. Banks overcomes this with the patented Air Mass Control Module (US Patent #11,193,441), allowing for a massive SuperTube design that significantly outperforms the stock setup and competitors without triggering a check engine light.

This system features a "Big-Ass" oiled filter and a two-piece XLPE airbox that shields the intake charge from engine bay heat. The design integrates directly with the OEM hood and forward ram-air scoops to capitalize on high-velocity air at speed, while an additional side inlet draws fresh air from the wheel well. A specialized EPDM bellowed silicone coupler accommodates engine movement under load while maintaining a smooth, tapered transition for maximum air density.

• Provides a 58% air mass flow gain over the factory intake
• Includes Patented Banks Air Mass Control Module to prevent CELs
• Large oiled filter element for extended service life and high dirt capacity
• Massive XLPE airbox construction for durability and heat rejection
• Bellowed EPDM elbow allows for natural engine torque movement
• Simple installation using factory mounting points
• Manufacturer Part Number: 42266-D
• 5-Year Limited Warranty

Fits select 2020-2023 Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD models (6.6L L5P Duramax).

The Banks Power Ram-Air Intake System (MPN 42266) addresses the restrictive induction tuning of the 2020-2023 L5P Duramax. This system includes the patented Banks Air Mass Control Module (US Patent #11,193,441), which allows for an oversized intake tube without triggering check engine lights. The massive SuperTube and large-capacity airbox provide a 58% gain in air mass flow over the stock assembly, improving turbo response and engine efficiency.

Built for durability and performance, the system features a two-piece XLPE airbox and a unique EPDM bellows coupler. This design allows for natural engine movement while maintaining a secure seal. The enclosed airbox connects directly to the OEM hood and front ram-air scoops to draw in cool, dense air while shielding the filter from power-robbing engine heat.

• Air Mass Flow Gain: 58% over stock induction.
• Filter Type: Multi-layer oiled filter element for high dirt capacity and maximum flow.
• Air Mass Control Module: Patented electronic module prevents CELs and optimizes induction tuning.
• Construction: Massive XLPE airbox and SuperTube intake pipe.
• Coupler: Exclusive EPDM bellows allows for engine vibration and movement.
• Installation: Direct bolt-on to factory mounting points and OEM ram-air scoops.
• Warranty: 5-year Limited Warranty.
• Part Number: 42266

Fits 2014-2018 Ram 1500 and 2019 Ram 1500 Classic models (3.0L EcoDiesel).

The Banks Power Ram-Air Intake System (MPN 42260) is designed to replace the restrictive factory air box and intake tract to improve airflow, power, and efficiency. By providing a more direct, high-volume path for cool air to reach the engine, this system reduces pumping losses and helps the engine run cooler. This specific kit includes a silencer delete tube that replaces the baffled OE tube to further optimize airflow and provide a more authentic engine note.

The system features an oversized, high-flow oiled filter that maximizes filtration area while extending service life between cleanings. Designed for long-term use, the filter is fully washable and reusable. The enclosed housing design shields the intake from heat soak, ensuring a denser air charge for the turbocharger.

• Manufacturer Part Number: 42260
• Includes high-flow oiled filter and smooth-bore silencer delete tube
• Reduces airflow restrictions to improve horsepower and fuel economy
• Durable housing protects against engine bay heat soak
• Washable and reusable filter for reduced maintenance costs
• Direct-fit installation into factory mounting locations
• 5-year limited warranty

Fits 2013-2018 Ram 2500 and 3500 trucks (6.7L Cummins).

The Banks Power Ram-Air Intake System is engineered to feed your Cummins engine cooler, denser outside air for measurable gains in power and fuel economy. By replacing the restrictive factory setup with an aerodynamic, enclosed housing, this system delivers up to 66% greater airflow over stock. Every component is extensively validated through Computational Fluid Dynamics (CFD) software, flowbench testing, and real-world vehicle logging to ensure proven performance.

• Airflow Performance: Achieves 66% greater flow than the factory intake system.
• Enclosed Housing: Protects the intake from hot, power-robbing engine bay air to maintain lower intake air temperatures (IATs).
• Oiled Filter Element: A giant, high-flow filter maximizes filtration surface area, extending service intervals and requiring fewer cleanings.
• Durable Construction: Designed to accommodate engine movement under load to prevent component stress and damage.
• Manufacturer Part Number: 42255
• Warranty: 5-Year Limited Warranty.

Fits 2017-2019 Chevrolet Silverado and GMC Sierra 2500/3500 HD models equipped with the 6.6L Duramax L5P engine.

The Banks Power Ram-Air Cold Air Intake System (42249-D) is engineered to replace the restrictive factory air box, delivering a 70% increase in airflow to your Duramax L5P. By utilizing an enclosed housing to isolate the oversized dry filter element from power-robbing engine bay heat, this system ensures a cooler, denser air charge. This improved air-fuel ratio allows the engine to run leaner, which directly reduces soot output and decreases the frequency of DPF regeneration cycles.

• Outflows the stock intake system by 70% for improved throttle response.
• Standalone performance gain of +20 hp; increases to +81 hp when combined with a Derringer inline tuner.
• Enclosed housing prevents heat soak and maintains lower intake air temperatures (IATs).
• Oversized dry air filter element provides superior filtration and extended service life without the need for oiling.
• U.S. Patent #10,138,851 B2.
• Includes all necessary hardware for a direct-fit installation.

• Manufacturer Part Number: 42249-D
• Filter Type: Dry (Non-Oiled)
• Warranty: 5-Year Limited Warranty

Fits select 2017-2019 Chevrolet Silverado and GMC Sierra 2500/3500 HD trucks equipped with the 6.6L Duramax L5P diesel engine.

The Banks Power Ram-Air Intake System (MPN 42249) is engineered to optimize engine efficiency by providing a significant 70% increase in airflow over the factory induction system. Designed with a high-capacity, oversized oiled filter element, this system captures more debris while ensuring the engine breathes easier. The fully enclosed airbox housing isolates the intake from hot, power-robbing under-hood air, resulting in cooler intake temperatures and better combustion.

By increasing the air-fuel ratio, this intake allows the L5P engine to run leaner, which directly reduces soot output and decreases the frequency of DPF regeneration cycles. This system provides a standalone gain of +20 horsepower and can be combined with the Banks Derringer tuner for a total increase of up to +81 horsepower.

• Outflows stock induction systems by 70%
• Adds up to +20 hp (up to +81 hp when combined with Derringer tuner)
• Reduces soot output and DPF regen frequency
• Enclosed housing prevents heat soak from the engine bay
• Includes oversized oiled air filter element
• Manufacturer Part Number: 42249
• 5-Year Limited Warranty

Fits select 2013-2014 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models (6.6L LML).

The Banks Power Ram-Air Intake System is engineered to replace the restrictive factory airbox with a high-efficiency induction system that delivers cooler, denser air to your Duramax LML engine. By utilizing an enclosed cold-air housing and a streamlined internal design, this system outflows the stock intake by 35%. Extensive CAD simulation and flowbench testing ensure that this intake provides superior air density to the turbo inlet compared to both OEM and aftermarket competitors, resulting in gains of up to +39 hp and +69 lb-ft of torque.

• Outflows stock intake by up to 35% for improved throttle response and fuel economy
• Reduces exhaust gas temperatures (EGTs) and soot output
• Enclosed housing prevents heat soak by blocking hot engine bay air
• Exclusive 5-inch bellows accommodates engine movement to prevent component stress
• Large dry air filter element provides high-flow filtration with extended service intervals
• Designed to operate without triggering fault or error codes
• Manufacturer Part Number: 42230-D
• Includes a 5-Year Limited Warranty

Fits 1994-2002 Dodge Ram 2500 and 3500 (5.9L).

The Banks Power Ram-Air Intake System (MPN 42225) is engineered to eliminate the restrictive factory flat-panel airbox. By utilizing a large conical filter and an enclosed housing, this system outflows the stock configuration by up to 33%. The intake tube is precision-shaped using CFD (Computational Fluid Dynamics) software to maintain laminar flow, which results in lower Exhaust Gas Temperatures (EGTs), reduced smoke, and improved fuel economy.

• High-Flow Filtration: Replaces factory panel filter with a large-diameter conical filter for maximum surface area.
• Thermal Efficiency: The enclosed housing prevents hot engine bay air from entering the intake, ensuring a cooler, denser charge for the cylinders.
• CFD-Designed Tubing: Engineered to minimize turbulence and accommodate natural engine movement without risk of component damage.
• Filter Options: Compatible with Banks oiled (Red) or dry (Black) filters for varying maintenance preferences.
• Important Fitment Note: This Ram-Air intake system cannot be installed on vehicles equipped with a Banks Brake.

Each system is extensively tested and validated to ensure a precise fit and reliable service life. Includes a 5-year limited warranty.

Fits 2011-2016 Ford F-250 and F-350 Super Duty (6.7L).

The Banks Power 42215-D Ram-Air Intake System is an extensively tested cold-air solution designed to replace the restrictive factory airbox. Unlike "filter-on-a-stick" designs, the Ram-Air system features a fully enclosed and sealed housing that isolates the intake from hot, power-robbing engine bay air. This allows your 6.7L Power Stroke to inhale cooler, denser outside air, resulting in improved power, better fuel economy, and reduced Exhaust Gas Temperatures (EGTs).

The system utilizes a giant, reusable dry filter element that flows 26% better than the factory paper filter while providing high-flow filtration without the maintenance of oiled filters. The internal aerodynamic shape is optimized to eliminate flow restrictions and accommodate engine movement for maximum durability. It is designed to work seamlessly with factory sensors to ensure no trouble codes are generated.

• Manufacturer Part Number: 42215-D
• Flow Improvement: Outflows stock by 26%
• Filter Type: Reusable Dry Filter Element
• Housing: Fully enclosed and sealed to block engine heat
• Warranty: 5-Year Limited Warranty
• Reduces EGTs and helps maintain horsepower under load
• Triple-validated for performance and fitment

Fits select 2011-2016 Ford F-250 and F-350 Super Duty (6.7L).

The Banks Power Ram-Air Intake System (MPN: 42215) is an extensively tested cold-air intake designed to outperform restrictive factory units. By utilizing a fully enclosed and sealed housing, this system effectively blocks hot, power-robbing engine bay air, ensuring your 6.7L Power Stroke engine inhales cooler, denser outside air. This results in a 26% increase in airflow compared to the stock assembly, helping maintain horsepower under heavy load while reducing exhaust gas temperatures (EGTs) and improving fuel economy.

The system features a giant, reusable oiled air filter element that provides superior filtration and higher flow rates than traditional high-density paper filters. Designed for long-term durability, the intake housing accommodates natural engine movement to prevent stress on components and integrates seamlessly with factory sensors to avoid diagnostic trouble codes.

• Outflows stock intake by 26%
• Fully enclosed housing isolates the filter from engine heat
• Includes reusable oiled air filter element
• Reduces EGTs and improves fuel efficiency
• Accommodates engine movement for maximum durability
• Works with factory sensors for trouble-free operation
• 5-Year Limited Warranty
• Manufacturer Part Number: 42215

Fits 1999-2003 Ford F-250/F-350 Super Duty and Excursion models (7.3L Power Stroke).

The Banks Power Ram-Air Intake System (MPN 42210-D) is engineered to replace the restrictive factory air box on your 7.3L Power Stroke with a high-efficiency, fully sealed housing. By isolating the intake from hot under-hood temperatures and providing a direct path for fresh, ambient air, this system increases intake air density by 4.5% over stock. This optimization leads to improved combustion efficiency, lower Exhaust Gas Temperatures (EGTs), and noticeable gains in both horsepower and torque.

Designed for heavy-duty use and towing, the system features a giant dry-element air filter that maximizes airflow while maintaining superior filtration without the need for oiling. The enclosed housing protects the filter from debris and prevents engine bay heat soak, ensuring consistent performance under heavy load. The system is a direct bolt-on upgrade that accommodates natural engine movement and requires no modifications to the vehicle.

• Performance gains of up to +16 hp and +32 lb-ft of torque
• 4.5% increase in intake air density for improved efficiency
• Large-volume dry air filter for high-flow filtration and easy maintenance
• Fully enclosed housing insulates against engine heat
• Direct bolt-on installation with factory mounting points
• Backed by a 5-year Limited Warranty
• Manufacturer Part Number: 42210-D

Fits 1999-2003 Ford F-250/F-350 Super Duty and Excursion models equipped with the 7.3L Power Stroke diesel engine.

The Banks Power Ram-Air Intake System (MPN 42210) is engineered to outperform restrictive factory setups by delivering a 4.5% increase in intake air density. This fully sealed system features an enclosed housing that insulates the intake charge from hot engine bay air, drawing in cooler, oxygen-rich ambient air to improve combustion efficiency. Designed for direct bolt-on installation with no modifications required, this system helps lower Exhaust Gas Temperatures (EGTs) while supporting significant performance gains.

• Performance Gains: Up to +16 hp and +32 lb-ft of torque
• Intake Density: 4.5% increase over stock for improved power under load
• Housing: Fully enclosed airbox prevents heat soak from the engine compartment
• Filter Type: High-flow oiled air filter element for maximum filtration and airflow
• Serviceability: Easy-access design for filter monitoring and maintenance
• Warranty: 5-year limited manufacturer warranty
• Installation: Simple bolt-on design accommodates engine movement

Fits 2010-2012 Dodge and Ram 2500/3500 models equipped with the 6.7L Cummins diesel engine.

The Banks Power Ram-Air Intake System (MPN 42180-D) is engineered to replace the restrictive factory air box with a high-efficiency, cold-air induction system. By utilizing an enclosed housing, this system isolates the air intake from power-robbing engine compartment heat, delivering cooler, denser air to the turbocharger. Testing shows a 50% increase in airflow over stock, resulting in gains of up to +28 hp and +52 lb-ft of torque, along with a 6.4% improvement in intake air density.

This system features an industry-exclusive 4.5-inch bellows designed to accommodate natural engine movement, protecting the intake components from stress and fatigue. The included giant dome-shaped dry filter maximizes surface area for high-flow filtration and extended service intervals without the need for filter oil.

• Outflows stock intake by up to 50%
• Reduces exhaust gas temperatures (EGTs) and soot output
• Enclosed housing prevents hot air ingestion
• Exclusive 4.5-inch bellows accommodates engine vibration and torque
• Includes large-surface-area dry air filter element
• No fault or error codes; CAD-designed and flowbench tested
• Manufacturer Part Number: 42180-D
• Warranty: 5-Year Limited

Fits select 2010-2012 Dodge and Ram 2500/3500 models equipped with the 6.7L engine.

The Banks Power Ram-Air Intake System (MPN: 42180) is engineered to outperform the restrictive factory setup by providing up to 50% more airflow. By utilizing an enclosed cold-air housing, this system ensures the engine breathes cool, dense outside air rather than hot under-hood air, resulting in a 6.4% increase in intake density. This thermal efficiency translates to performance gains of up to +28 hp and +52 lb-ft of torque while simultaneously reducing exhaust gas temperatures (EGTs) and soot buildup.

A standout feature of this system is the aftermarket-exclusive 4.5-inch bellows. These bellows are specifically designed to accommodate natural engine movement during heavy load, protecting intake components from stress and extending service life. Every system is extensively validated via CAD simulations, flowbench testing, and vehicle-specific density testing to ensure maximum performance without triggering fault or error codes.

• Outflows factory intake by up to 50% for improved power and fuel economy
• Includes a giant dome-shaped oiled air filter element for maximum filtration
• Enclosed housing prevents heat soak and protects against power-robbing engine air
• Exclusive 4.5-inch bellows accommodate engine movement to prevent component fatigue
• Tested and proven to deliver higher air density to the turbo inlet than competitors
• 5-year limited warranty
• Manufacturer Part Number: 42180

Fits 2007-2009 Dodge Ram 2500 and 3500 models equipped with the 6.7L Cummins diesel engine.

The Banks Power 42175-D Ram-Air Intake System is engineered to replace the restrictive factory air box with a high-efficiency, enclosed cold-air housing. By drawing in cooler, denser outside air and streamlining the internal flow path, this system outflows the stock intake by up to 50%. The result is a measurable increase in performance, providing gains of up to +28 hp and +52 lb-ft of torque, while simultaneously reducing exhaust gas temperatures (EGTs) and improving fuel economy.

Built for long-term durability in heavy-duty applications, the system features an exclusive 4-1/2 inch bellows connector that accommodates natural engine movement to prevent component fatigue. The large, dome-shaped dry filter element maximizes filtration surface area for extended service intervals and is designed to work seamlessly with factory electronics to prevent fault codes.

• Outflows stock intake by up to 50% and increases intake density by 6.4%
• Verified gains of up to +28 hp and +52 lb-ft of torque
• Enclosed housing shields the filter from power-robbing engine heat
• Includes a high-flow dry air filter for superior filtration without oiling
• 4-1/2 inch bellows accommodate engine torque and vibration
• CAD-designed and flow-bench tested for precision fitment
• Manufacturer Part Number: 42175-D
• 5-Year Limited Warranty

Fits 2007-2010 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models (6.6L).

The Banks Power Ram-Air Intake System is engineered to maximize the delivery of cool, dense air to your 6.6L LMM Duramax engine. By replacing the restrictive factory assembly with a streamlined, enclosed housing and large-bore intake tract, this system outflows the stock unit by 47%. This increase in airflow delivers a 5.4% on-highway air density gain, helping to reduce exhaust gas temperatures (EGTs) and improve fuel economy during heavy towing or hauling.

Built for durability in hardworking trucks, this kit features an industry-exclusive 5-inch bellows designed to accommodate natural engine movement, preventing stress and potential damage to intake components. The included high-flow dry filter element provides superior filtration and an extended service life without the need for oiling. Every system is CAD-designed and flow-bench validated to ensure a precise fit and optimal performance without triggering fault codes.

• Outflows stock intake by 47% for improved turbo responsiveness
• Delivers a 5.4% on-highway density gain for better combustion efficiency
• Enclosed housing isolates the filter from hot engine bay air
• Giant dome-shaped dry air filter element (no oiling required)
• Integrated 5-inch bellows accommodates engine movement under torque
• Extensively tested to ensure no fault or error codes
• Manufacturer Part Number: 42172-D
• Note: Super-Scoop is no longer available for this application

Fits select 2007-2010 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD models (6.6L LMM Duramax).

The Banks Power Ram-Air Intake System is engineered to replace the restrictive factory air box on your 6.6L Duramax. By utilizing a fully enclosed cold-air housing and a streamlined design, this system maximizes the intake of cool, dense air to the turbo. This design effectively reduces exhaust gas temperatures (EGTs) and improves both power and fuel economy. The kit features a giant dome-shaped oiled filter that provides superior filtration and higher flow capacity compared to standard filters.

An industry-exclusive 5-inch bellows is included to accommodate natural engine movement during heavy operation, protecting system components from damage and extending service life. Developed through CAD software and flowbench testing, this system is proven to outflow the stock intake by up to 47% and deliver a 5.4% on-highway air density gain without triggering fault codes.

• Large-area oiled air filter element for maximum airflow
• Enclosed housing prevents hot engine air from entering the intake
• Exclusive 5-inch bellows accommodates engine movement
• Outflows stock system by 47%
• 5.4% on-highway density gain
• Reduces EGTs and improves fuel economy
• 5-year Limited Warranty
• Manufacturer Part Number: 42172

Fits select 2003-2007 Ford E-350 Super Duty, Excursion, F-250 Super Duty, and F-350 Super Duty (6.0L).

The Banks Power Ram-Air Intake System (MPN 42155) is engineered to replace the restrictive factory air box, delivering a measured 38% improvement in airflow. By utilizing a high-flow, dome-shaped oiled cotton gauze filter and an aerodynamic enclosed housing, this system inhales cooler outside air while blocking power-robbing heat from the engine bay. This results in improved power and throttle response for your 6.0L Power Stroke diesel.

Unlike the expensive and restrictive factory paper filters, the Banks Ram-Air filter is easily accessible for monitoring and cleaning. The system is designed for a seamless installation, working with original sensors to prevent trouble codes and utilizing factory bellows to safely accommodate engine movement under load.

• Outflows stock intake by up to 38%
• Enclosed housing prevents hot engine air ingestion
• Large reusable oiled cotton gauze air filter maximizes filtration area
• Aerodynamic design eliminates restrictive sharp bends and chokepoints
• Utilizes factory bellows to accommodate engine movement
• Manufacturer Part Number: 42155
• 5-Year Limited Warranty

Fits 2003-2007 Dodge Ram 2500 and 3500 (5.9L).

The Banks Power Ram-Air Intake System is engineered to outperform both the factory intake and aftermarket competitors by delivering up to 62% better airflow to your 5.9L Cummins engine. This flowbench-developed system utilizes an enclosed cold-air housing that draws in cooler, denser outside air through large side and bottom inlets. By reducing intake temperatures, this system helps lower exhaust gas temperatures (EGTs), minimizes soot and smoke, and improves overall fuel economy.

Unlike rigid intake designs, the Ram-Air system features an exclusive 4-1/2 inch bellows. This flexible component allows for natural engine movement under load, preventing stress on intake connections and ensuring a long, reliable service life. The included dry air filter offers a massive surface area for high-capacity filtration and extended service intervals without the need for oiling.

• Outflows stock intake systems by up to 62% for improved throttle response
• Enclosed housing prevents hot engine bay air from entering the intake tract
• Large filter area allows for more dirt capacity and fewer cleanings
• Exclusive 4.5-inch bellows accommodates engine torque to prevent component damage
• Includes a high-efficiency dry filter element for easy maintenance
• 5-Year Limited Warranty
• Manufacturer Part Number: 42145-D