Fits select 2004-2005 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 models (6.6L).

The Banks Power Ram-Air Intake System is engineered to replace the restrictive factory air box with a high-performance, fully enclosed cold-air housing. Unlike "filter on a stick" designs that pull in hot, power-robbing underhood air, the Ram-Air system inhales cool, dense outside air to maximize combustion efficiency. This specific kit features a high-capacity dry filter element, ideal for drivers who prefer a low-maintenance, oil-free filtration solution.

Every Banks Ram-Air system is developed using CAD software and flow simulation before being validated on a flowbench and dynamometer. This kit is uniquely designed with integrated bellows to accommodate engine movement, preventing stress on intake components for a longer service life. Expect significant reductions in exhaust gas temperatures (EGTs) and soot output, alongside improved throttle response.

• Manufacturer Part Number: 42135-D
• High-flow Dry Filter element requires no oiling
• Outflows stock intake and competitors by up to 35%
• Gains of up to +39 hp and +69 lb-ft torque (with tuner)
• Enclosed housing keeps out hot engine air
• Integrated bellows accommodate engine movement to prevent damage
• Reduces EGTs and improves fuel economy
• 5-Year Limited Warranty

Fits select 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 models (6.6L).

The Banks Power Ram-Air Intake System replaces your restrictive factory air box with a flow-bench developed, high-velocity induction system. Engineered to outflow the stock intake by up to 57%, this system utilizes a fully enclosed housing to isolate the filter from power-robbing engine heat. By inhaling cooler, denser outside air, your LB7 engine benefits from increased horsepower, improved fuel economy, and lower exhaust gas temperatures (EGTs).

Built for long-term durability, the Ram-Air system is the only aftermarket intake featuring integrated bellows. These bellows allow for natural engine movement under load, preventing stress on intake components and ensuring a leak-free seal. This kit includes a giant, high-flow dry filter element that provides superior filtration and extended service intervals without the need for oiling.

• Airflow Improvement: Outflows stock by up to 57%
• Filter Type: Large-capacity dry filter (no oiling required)
• Housing: Enclosed cold-air box prevents hot air ingestion
• Exclusive Features: Integrated bellows to accommodate engine movement
• Performance Gains: Reduces soot, smoke, and EGTs while improving MPG
• Warranty: 5-Year Limited Warranty
• MPN: 42132-D

Fits 2017-2019 Ford F-250 and F-350 Super Duty models (6.7L Power Stroke).

The Banks Power Ram-Air Intake System (MPN 41890-D) is engineered to overcome the restrictive nature of the factory 6.7L induction system. While many aftermarket kits require dangerous battery relocation, Banks engineers developed a solution that retains the stock battery location while achieving a 40% air density increase over stock and a +49% mass air flow gain. By maximizing air density at the turbo inlet, this system provides the oxygen necessary for improved combustion, throttle response, and fuel efficiency.

• Airflow Performance: Delivers a 49% mass air flow gain and 40% density improvement at the turbo.
• Dry Filtration: Features an easy-to-clean, high-capacity dry filter with 99% filtration efficiency for maximum engine protection.
• Premium Construction: Includes an EPDM rubber elbow with bellows and a built-in coolant hose rest to accommodate engine torque.
• Optimized Inlet Design: A forward-facing inlet integrates with stock ducting, supported by a secondary inlet to draw the coolest air possible.
• Direct Bolt-On: Retains factory mounting points and the stock battery tray for a secure, professional installation.

Fits 2017-2019 Ford F-250 and F-350 Super Duty (6.7L).

The Banks Power Ram-Air intake system for the 6.7L Power Stroke is engineered to maximize air density at the turbo inlet for significant power and efficiency gains. While some aftermarket designs require cantilevering the heavy vehicle battery over the engine using angle-iron, Banks engineers spent over a year developing a system that retains the stock battery location. This maintains structural integrity for off-road conditions while still outperforming competitors in airflow and density.

This system (MPN 41890) features a massive oiled filter with 1,065 square inches of surface area, providing the highest dirt capacity in its class and 99% filtration efficiency. The intake path is optimized via a forward-facing inlet and a secondary air source, coupled with a high-durability EPDM rubber elbow. The integrated bellows in the elbow account for engine movement, preventing stress on the intake housing and ensuring a reliable seal.

• +49% Mass Air Flow gain over the factory intake
• 40% air density improvement at the turbocharger inlet
• Largest-in-class oiled filter with 1,065 sq-in surface area
• Maintains factory battery location for safety and durability
• Secondary air inlet draws in the coolest possible ambient air
• High-temp EPDM rubber bellows and integrated coolant hose rest
• Simple, bolt-on installation with standard hand tools
• Manufacturer Part Number: 41890

Fits select 2018-2025 Jeep Wrangler JL and Gladiator JT models equipped with the 3.6L engine. This Banks Power Ram-Air system replaces the restrictive factory intake with a high-flow, cold-air solution designed to maximize air density and improve engine efficiency.

Built for the trail and the highway, the Ram-Air system features a durable, fully enclosed molded housing that shields the intake from power-robbing engine bay heat. At the center of the system is the signature Big-Ass Filter, offering a massive 672 square inches of surface area for superior dirt capacity and longer service intervals. Using computational fluid dynamics and rigorous flow bench testing, Banks engineered this system to deliver a tested 782 CFM of airflow, significantly reducing restriction compared to the OE setup.

• Manufacturer Part Number: 41843
• Flow Rate: 782 CFM (82% gain over stock)
• Air Density: 38% improvement over factory intake
• Filter Surface Area: 672 sq. in. multi-layer woven cloth
• Housing: Enclosed, heat-resistant molded plastic
• Installation: Direct-fit replacement for factory components
• Warranty: 5-Year Limited Warranty

Fits select 2012-2018 Jeep Wrangler and Wrangler Unlimited models (3.6L).

The Banks Power Ram-Air Intake System (MPN 41837-D) is engineered to replace the restrictive factory air box and flat panel filter with a high-flow, enclosed induction system. By utilizing a large conical dry filter and oversized tubing, this intake reduces airflow restriction by 64% compared to the stock setup. The system includes a precision-tuned Helmholtz resonator, specifically designed to cancel out engine drone at highway speeds while maintaining a performance intake note.

• Performance Gains: Up to +8 hp and +11 lb-ft of torque
• Airflow: 64% less restrictive than the factory intake
• Housing: Enclosed design shields the intake from power-robbing engine bay heat
• Resonator: Integrated Helmholtz resonator eliminates cabin drone
• Filter: Large-surface-area Dry Filter for high-flow filtration without oiling
• Maintenance: Extends service life with fewer required cleanings compared to stock
• Installation: Accommodates natural engine movement to prevent component damage
• Manufacturer Part Number: 41837-D
• Warranty: 5-Year Limited Warranty

Upgrade your 2022+ Subaru WRX with the AMS Performance Air Intake System. This comprehensive kit is engineered to replace the factory intake components, providing a direct path for cooler, denser air to reach your engine. The design aims to maximize airflow efficiency while maintaining optimal filtration.

This performance intake includes a custom-designed intake duct and a sealed airbox, ensuring that only cool, outside air is fed into the system, minimizing heat soak from the engine bay. The integrated design makes for a straightforward installation, bolting directly to factory mounting points.

• Fits: 2022+ Subaru WRX
• Manufacturer Part Number: AMS.50.08.0002-1
• Includes: Performance air filter, intake duct, sealed airbox, and necessary hardware
• Engineered for optimized airflow and improved throttle response

The AMS Performance Air Intake (Part No. AMS.50.08.0001-1) is a performance-oriented component designed for the 2022 and newer Subaru WRX. This specific intake solution is supplied as a core component, intended to work with a custom airbox setup or as a replacement part for an existing AMS intake system.

This air intake is engineered to optimize airflow to the turbocharger, which can lead to improved engine efficiency and throttle response. By minimizing restrictions, it allows the engine to breathe more freely than typical stock components.

Please Note: This product includes the primary air intake component(s) only. It does not include an air intake duct or a complete airbox assembly. These items must be retained from the factory setup, or acquired separately, depending on your build requirements.

• Direct-fit for 2022+ Subaru WRX
• Designed to improve airflow to the turbocharger
• Manufacturer Part Number: AMS.50.08.0001-1

Unlock greater performance and a more aggressive induction note from your BMW G8X M2, M3, or M4 (S58 engine) with the AMS Performance Open Airbox Cold Air Intake System. This advanced intake is specifically engineered to maximize the volumetric efficiency of your S58 engine, providing a direct path for cold, dense air to reach the turbos.

By replacing the restrictive factory airbox, this open-airbox design significantly reduces intake restriction and turbulence. The result is improved throttle response and measurable power gains throughout the RPM range, making your vehicle feel more lively and responsive. The unconstrained airflow also amplifies the exhilarating sounds of the S58 engine under acceleration, enhancing the driving experience.

• Engineered for direct fitment on BMW G8X M2, M3, and M4 models (S58 engine)
• Optimizes airflow to the turbos for improved horsepower and torque
• Reduces intake restriction, enhancing throttle response
• Open airbox design amplifies induction sound
• Manufacturer Part Number: AMS.48.08.0001-1

Upgrade your 2023+ Nissan Z with the AMS Performance 80mm Air Intakes, engineered to maximize airflow and unlock your engine's potential. These direct-fit intakes replace restrictive factory components, allowing the twin-turbo VR30DDTT engine to breathe more freely and produce enhanced power and throttle response across the RPM range.

Designed for optimal performance, the 80mm diameter intake tubes significantly reduce turbulence and improve volumetric efficiency. Installation is straightforward, utilizing factory mounting points for a secure fit without complex modifications. Experience a more aggressive induction note under acceleration, signaling the increased performance of your Z.

• Fits: Nissan Z 2023+
• Intake Tube Diameter: 80mm
• Direct bolt-on replacement for factory airboxes
• Optimized for increased airflow and reduced restriction
• Enhances engine sound and throttle response
• Manufacturer Part Number: AMS.47.08.0003-1

Fits select 2013-2020 Audi A3, A3 Quattro, S3, and Volkswagen Golf R.

The AMS Performance MKVII Carbon Fiber Cold Air Intake Upgrade is engineered to maximize airflow into the factory turbocharger by replacing restrictive stock components. This system replaces the bulky OEM air filter box with a high-flow dry media filter and lightweight chopped carbon fiber tubing. By optimizing the intake path and drawing cooler air from outside the engine bay, this kit provides a significant performance overhead while cleaning up the engine bay's appearance.

• High-volume cold air induction for improved turbocharger efficiency
• Premium chopped carbon fiber construction for superior heat resistance and durability
• High-flow dry media air filter eliminates the need for oiling
• Supports high-performance power levels up to 600HP
• Direct bolt-on replacement for factory intake tubing and filter box
• Manufacturer Part Number: AMS.21.08.0001-2

Fits 2015-2019 Volkswagen Golf R Base (MK7).

The AMS Performance Carbon Fiber Cold Air Intake is engineered to optimize engine efficiency by delivering a higher volume of ambient air directly to the stock turbocharger. By replacing the restrictive factory airbox with a high-flow carbon fiber housing, this intake reduces pressure drop and helps maintain lower intake air temperatures during spirited driving or track use.

Crafted from premium carbon fiber, this intake provides superior heat resistance and a high-end aesthetic for your engine bay. It is a direct-fit upgrade that utilizes factory mounting points for a straightforward installation process.

• Designed for maximum airflow to the factory turbocharger
• Lightweight, heat-resistant carbon fiber construction
• Direct bolt-on replacement for the OE intake system
• Improves turbocharger spool and induction acoustics
• Manufacturer Part Number: AMS.21.08.0001-1

Upgrade the induction system on your Infiniti Q50 or Q60 with the AMS Performance 80mm Air Intakes. Engineered specifically for the VR30DDTT engine found in select 2016-2024 Infiniti Q50 and 2017-2022 Infiniti Q60 models, this intake system is designed to replace the restrictive factory air boxes and piping.

The 80mm diameter intake tubes provide a substantial increase in cross-sectional area compared to stock, optimizing airflow to the twin turbochargers. This reduced restriction enhances volumetric efficiency, which can contribute to improved throttle response and increased engine output, especially at higher RPMs.

These intakes are developed for a straightforward installation, bolting directly to factory mounting points. All necessary hardware for a complete installation is typically included, ensuring a precise fit and reliable performance.

• Application: Select 2016-2024 Infiniti Q50 (VR30DDTT) / 2017-2022 Infiniti Q60 (VR30DDTT)
• Intake Diameter: 80mm
• Manufacturer Part Number: ALP.28.08.0003-1

Fits 2004 Mazda Miata (Base, LS, and Mazdaspeed).

The AEM 22-489P Performance Short Ram Air Intake System is engineered to replace the restrictive factory air filter and housing, providing a more efficient path for airflow. Constructed from mandrel-bent aluminum with a durable polished finish, this system is tuned and dyno-tested to improve throttle response and engine resonance. This specific kit includes a high-flow AEM charge pipe designed to optimize turbocharger performance.

Air is filtered through an oversized, tapered cylinder AEM Dryflow air filter. This oil-free synthetic media offers exceptional filtration and is washable, allowing for service intervals up to 100,000 miles. To maintain performance, a custom-fit heat shield is included to protect the intake from high engine bay temperatures. The system is designed to accommodate factory emissions equipment, including the mass airflow (MAF) sensor and engine breather hoses, for a precise fit and straightforward installation.

• Mandrel-bent aluminum tubing with a polished chrome-like finish
• Oil-free, washable synthetic Dryflow air filter (no oiling required)
• Includes high-flow charge pipe for enhanced turbo gains
• Dedicated heat shield preserves horsepower by blocking radiant engine heat
• Direct replacement for factory airbox and intake tubing
• Retains factory MAF sensor and engine breather hose mounts
• Manufacturer Part Number: 22-489P
• AEM Limited Lifetime Warranty

Fits 1992-2000 Honda Civic and 1993-1997 Honda Civic del Sol (DX, LX, EX, Si, S, VTEC).

The AEM 22-401R Performance Short Ram Air Intake System is a direct-fit upgrade designed to replace the restrictive factory air filter and intake housing. This system utilizes a mandrel-bent aluminum intake tube to provide a smooth, low-restriction path for incoming air, improving throttle response and engine resonance under acceleration. The tubing is finished in a durable red powder coating for heat resistance and engine bay aesthetics.

Filtration is handled by an oversized AEM Dryflow synthetic air filter. This oil-free, washable media provides excellent airflow while protecting the engine from contaminants for up to 100,000 miles between cleanings. The system is engineered to accommodate all factory emissions control devices, including the engine breather hose, vacuum lines, and intake air temperature (IAT) sensor where applicable.

• Mandrel-bent aluminum intake tubing with red powder-coated finish
• Oil-free AEM Dryflow synthetic washable air filter
• Retains factory emissions equipment, vacuum lines, and IAT sensors
• Tapered cylinder filter design for maximum surface area
• Easy installation with standard hand tools
• Manufacturer Part Number: 22-401R
• AEM Limited Lifetime Warranty