Fits 2024-2026 Toyota Tacoma and Land Cruiser models. This rear belly skid plate provides essential underbody armor to protect your engine and oil pan from trail damage. Constructed from 3.5mm heavy-duty steel, it is designed to withstand impacts from rocks and obstacles while maintaining a high-clearance profile.

The DV8 SPTT1-09 features a durable micro-texture black powder coat finish for superior corrosion resistance. To ensure routine maintenance remains straightforward, it includes a removable access panel for the oil drain plug, eliminating the need to remove the entire plate for oil changes. This skid plate is a fully bolt-on solution that integrates seamlessly with both factory and DV8 front skid plates.

• Fits 2024-2026 Toyota Tacoma and Land Cruiser
• Fabricated from 3.5mm heavy-duty steel
• Micro-texture black powder coat finish
• Removable service panel for easy oil drain plug access
• Compatible with factory and DV8 front skid plates
• Simple, 100% bolt-on installation
• Manufacturer Part Number: SPTT1-09

Fits all 2024-2026 Toyota Tacoma models, including SR, SR5, TRD Off-Road, TRD Sport, TRD Pro, TRD PreRunner, Limited, and Trailhunter.

Armor the underside of your 4th-gen Tacoma with the DV8 Offroad Front Skid Plate (SPTT1-08). This plate is engineered to provide critical protection for the engine and intercooler against trail obstacles while maintaining ease of maintenance. The design includes a specific cutout to retain full access to the oil filter, ensuring you don't have to remove the armor for routine oil changes.

Constructed from heavy-duty 3.5mm steel, this skid plate is finished in a durable micro-texture black powder coat to resist corrosion and abrasions. It is fully compatible with both the factory front bumper and the DV8 Tacoma Centric Front Bumper, and it integrates seamlessly with either the OEM or DV8 Rear Belly Skid Plate. The installation is a direct bolt-on process using factory mounting points, requiring no drilling or permanent vehicle modifications.

• Protects engine and intercooler from impact damage
• Maintains factory oil filter access
• Fabricated from high-strength 3.5mm steel
• Micro-texture black powder coat finish for durability
• Compatible with factory or DV8 Centric front bumpers
• Easy bolt-on installation with included hardware
• Manufacturer Part Number: SPTT1-08

Fits 2024-2026 Toyota Land Cruiser (1958, Base, and First Edition).

Protect the critical components of your engine and intercooler from trail obstacles with the DV8 Offroad Front Skid Plate. Engineered for durability without sacrificing convenience, this skid plate features a strategic cutout that leaves the oil filter accessible for easy, routine maintenance. The design utilizes four existing factory mounting points for a secure fit and a straightforward, 100% bolt-on installation process.

Constructed from heavy-duty 3.5mm steel, this plate is finished in a micro-texture black powder coat to resist corrosion and mechanical wear. It is fully compatible with either the OEM or the DV8 Offroad Rear Belly Skid Plate for comprehensive underbody coverage.

• Material: 3.5mm High-strength Steel
• Finish: Micro-texture Black Powder Coat
• Installation: Bolt-on using 4 factory mounting points
• Protection: Shields engine and intercooler
• Serviceability: Maintains access to oil filter
• MPN: SPTL4-02

Fits select 2018-2025 Jeep Wrangler JL/JLU and 2020-2025 Jeep Gladiator JT across all trim levels (including Rubicon, Mojave, 4xe, and 392).

The DV8 Offroad SPJL-02 Sway Bar Disconnect Skid Plate is engineered to protect the sensitive electronic disconnect motor from trail obstacles and debris. Beyond functional protection, this skid plate provides a clean, finished appearance by concealing the exposed frame horns and crash bars that are often visible after installing an aftermarket front bumper.

Constructed from heavy-duty steel, the plate features precision-cut vents to maintain optimal airflow to the engine bay, helping to manage temperatures during high-RPM off-road use. The four-point mounting system ensures maximum rigidity and support when navigating technical terrain.

• Vehicle Protection: Shields the Rubicon sway bar disconnect motor from direct impacts.
• Clean Aesthetics: Covers factory frame horns and crash bars for a professional look with aftermarket bumpers.
• High Airflow: Vented design prevents heat soak in the engine compartment.
• Easy Installation: 100% bolt-on design utilizes factory mounting points; no drilling or permanent modifications required.
• Manufacturer Part Number: SPJL-02

Fits 2007-2018 Jeep Wrangler JK models equipped with the factory Dana 30 front axle. This includes Sport, Sahara, Rubicon, and Unlimited trims.

Protect your drivetrain from expensive trail damage with the DV8 Offroad SPJK-11 Front Differential Skid Plate. Designed specifically for the factory Dana 30 axle housing, this skid plate shields the pinion area and the lower section of the housing from direct rock impacts. By reinforcing the bottom of the differential, it prevents the cover from catching on obstacles and pulling away from the housing, which is a common cause of fluid leaks during technical rock crawling.

The SPJK-11 features a durable micro-texture black powder coat finish for superior corrosion resistance and a clean look. The simple bolt-on design utilizes multiple mounting points for maximum rigidity without the need for welding or major modifications. Please note that this unit is designed for use with factory differential covers and will not clear most aftermarket covers.

• Manufacturer Part Number: SPJK-11
• Compatible Axles: Factory Dana 30 Front ONLY (Not for Dana 44)
• Finish: Micro-Texture Black Powder Coat
• Installation: 100% Bolt-On
• Function: Protects pinion area and prevents housing hang-ups

Fits 2021-2026 Ford Bronco models including Badlands, Raptor, Wildtrak, and Everglades. Note: These are only compatible with trailing arm mounts that feature the OEM welded skid plate.

When navigating technical terrain, the frame-side trailing arm mounts are among the lowest and most vulnerable points on the Ford Bronco chassis. The DV8 Offroad SPBR-05 Trailing Arm Skid Plates are engineered to provide heavy-duty, wraparound protection for these crucial mounting components, preventing hang-ups on rocks and protecting the factory structure from impact damage.

Constructed for durability and a seamless fit, these skid plates feature a simple bolt-on installation that requires no permanent modifications. The micro-texture black powder coat finish provides superior corrosion resistance while matching the look of the OEM undercarriage for a clean, integrated appearance.

• Wraparound design for maximum coverage of the trailing arm mounting component
• Protects the lowest hanging frame mounts from off-road obstacles
• Heavy-duty construction prevents frame-side damage
• Micro-texture black powder coat finish matches factory trim
• Easy bolt-on installation for 2021-2026 Bronco models
• Manufacturer Part Number: SPBR-05

Fits 2021-2026 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe, and Wildtrak).

The DV8 Offroad SPBR-04 Rear Shock Skids are engineered to shield the most vulnerable points on your Bronco's rear axle. Positioned at the lowest part of the axle housing, these skids protect both the rear shocks and the lower link mounts from impact and abrasion on the trail. Unlike multi-piece designs, these utilize a single-piece construction that ties the shock and link mounts together, significantly increasing the structural rigidity of the brackets.

Constructed from 3.5mm steel plating and finished in a durable micro-texture black powder coat, these skids allow your vehicle to slide over obstacles rather than hanging up on factory mounts. The simple bolt-on installation utilizes factory hardware and is compatible with most aftermarket shocks, links, and lift kits.

• Manufacturer Part Number: SPBR-04
• Material: 3.5mm Steel Plating
• Finish: Micro-Texture Black Powder Coat
• Protects rear shock mounts and lower control arm links
• Single-piece design for maximum strength
• Direct bolt-on installation using factory hardware
• Compatible with most lift kits and aftermarket components

Fits 2021-2026 Ford Bronco all trims including Badlands, Wildtrak, Raptor, and Heritage Edition.

Protect your drivetrain from severe trail damage with the DV8 Offroad Rear Differential Skid Plate (SPBR-03). This heavy-duty armor shields the differential housing, gasket seal, and pinion from direct impacts. Beyond the center section, the design features extended steel plating that protects the full length of the rear axle from link mount to link mount, ensuring your suspension mounting points remain intact during technical rock crawling.

Engineered for maximum durability, the skid plate utilize eight individual mounting locations for a secure, rigid fit. To prevent the accumulation of trail debris, strategically placed drain holes allow water and mud to clear the assembly easily. The unit is finished in a micro-texture black powder coat for superior corrosion resistance and features a paintable aluminum logo plate for customization.

• Fabricated from 4mm and 5mm high-strength steel
• Protects rear differential, gasket seal, pinion, and axle tubes
• 8-point mounting system for maximum structural integrity
• Direct bolt-on installation with no drilling required
• Integrated drain holes for water and mud evacuation
• Compatible with both 2-door and 4-door models across all trims
• Micro-texture black powder coat finish
• Manufacturer Part Number: SPBR-03

Fits 2021-2026 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

Protect your Ford Bronco's vulnerable aluminum front lower control arms from trail damage with the DV8 Offroad A-Arm Skid Plates. Off-road obstacles like rocks and stumps can easily gouge aluminum components or shear factory hardware; these plates provide a rugged sacrificial barrier for the control arms and the lower shock mounting bolts. Engineered from heavy-duty 3.5mm steel and finished in a micro-texture black powder coat, they offer long-term corrosion resistance and durability against direct impacts.

Installation is a straightforward bolt-on process using the included hardware, requiring no permanent vehicle modifications. These skid plates are fully compatible with all Bronco trims, including those equipped with the Sasquatch and non-Sasquatch packages.

• Construction: 3.5mm heavy-duty steel
• Finish: Micro-texture black powder coat
• Protection: Shields A-arms and factory shock bolts
• Fitment: Compatible with all trims, including Raptor and Sasquatch packages
• Installation: Direct bolt-on; all hardware included
• Quantity: Sold as a pair
• Manufacturer Part Number: SPBR-02

Fits 2024-2025 Toyota Tacoma models, including SR, SR5, TRD Sport, TRD Off-Road, TRD PreRunner, TRD Pro, Trailhunter, and Limited.

Protect your 4th Gen Tacoma’s front undercarriage with the Addictive Desert Designs Stealth Center Mount Front Bumper Skid Plate. Specifically engineered to complement the Stealth Center Mount Winch Front Bumper, this plate provides essential armor against trail obstacles. The design maintains full functionality of factory equipment, including OEM sensors, the front camera, and Adaptive Cruise Control (ACC) systems.

Constructed from lightweight yet durable 3/16-inch aluminum, this skid plate is finished in a rugged satin black powder coat for superior corrosion resistance. The fully bolt-on design ensures a straightforward installation with no cutting or drilling required, allowing you to return to the factory configuration if needed.

• Designed specifically for the ADD Stealth Series Center Mount Winch Front Bumper
• 3/16-inch aluminum construction for high-strength protection
• Durable satin black powder coat finish
• Retains use of OEM front sensors and camera systems
• Simple bolt-on installation with included mounting hardware
• Made in the USA
• Manufacturer Part Number: AC6705601NA

Note: This skid plate is only compatible with the Stealth Center Mount Winch Front Bumper.

Fits 2022-2025 Ford Bronco Raptor.

Protect your Bronco Raptor's vital front-end components with the Addictive Desert Designs Rock Fighter Skid Plate. This heavy-duty upgrade is engineered to shield the undercarriage from rocks, ruts, and trail debris that can cause costly damage to essential drivetrain parts during off-road excursions. Specifically designed as a companion piece for ADD Rock Fighter or Bomber series front bumpers, it ensures seamless fitment and integrated protection.

Crafted in the USA from 3/16-inch high-grade aluminum alloy, this skid plate provides a high strength-to-weight ratio to keep your vehicle protected without unnecessary bulk. The satin black powder coat finish adds a layer of resistance against salt, corrosion, and harsh weather conditions while maintaining a clean, aggressive look.

• Specifically designed for use with Rock Fighter and Bomber front bumpers
• Constructed from 3/16-inch high-grade aluminum alloy
• Durable satin black powder coat finish for corrosion resistance
• Protects radiator and front-end components from off-road impacts
• Direct-fit installation with compatible ADD bumpers
• Made in the USA
• Manufacturer Part Number: AC26005NA03

Fits select 2021-2025 Ford Bronco models. The Addictive Desert Designs Bomber Front Skid Plate is engineered to replace the vulnerable factory plastic unit with high-clearance, heavy-duty protection. Designed specifically to follow the contours of the ADD Bomber Front Bumper, this skid plate provides a seamless transition and essential underbelly defense for your Bronco.

• Manufactured from high-grade 3/16-inch aluminum alloy for maximum durability and weight savings.
• Finished in a durable satin black powder coat to resist corrosion and off-road wear.
• Direct bolt-on installation using factory mounting points with no cutting required.
• Proudly made in the USA.
• Note: Specifically designed for use with the ADD Bomber series front bumper.

Manufacturer Part Number: AC23008NA03