Fits 2024-2026 INEOS Grenadier and Grenadier Quartermaster models (Base, Fieldmaster, Trialmaster).

Shield your vehicle's critical underbody components with the RIVAL premium aluminum skid plate. This high-strength armor is deep-stamped from 1/4-inch (6mm) aluminum alloy, providing a superior strength-to-weight ratio compared to traditional steel plates. Designed specifically for off-road environments, this plate protects the engine, transmission, and catalytic converter from damage caused by rocks, stumps, and debris without significantly increasing curb weight.

Installation is a direct bolt-on process using existing factory mounting points, requiring no drilling or cutting. The natural corrosion-resistant properties of the 1/4-inch aluminum ensure long-term durability and protection against rust, even if the exterior finish is gouged during heavy trail use.

• Deep-stamped 1/4-inch (6mm) aluminum alloy construction
• Protects engine, transmission, and catalytic converter
• No-drill, bolt-on installation using factory points
• Corrosion-resistant material for extreme environments
• Manufacturer Part Number: 2333.4501.1.6

Fits 2024-2026 Ford Ranger Raptor.

Protect your fuel system from trail hazards with the Rival premium gas tank skid plate. Engineered from 1/4-inch (6mm) deep-stamped aluminum alloy, this plate provides superior underbody strength and rigidity without the weight of traditional steel. The deep-stamping process reinforces the material, ensuring vital components remain shielded during technical off-roading, overlanding, or rock crawling.

• Constructed from high-strength 1/4-inch (6mm) deep-stamped aluminum alloy
• Lightweight design maintains vehicle performance and fuel efficiency
• Naturally corrosion-resistant aluminum prevents rust even when gouged or scratched
• Direct bolt-on installation uses factory mounting points with no drilling or cutting required
• Shields the gas tank from rocks, logs, and debris
• Manufacturer Part Number: 2333.1889.1.6

Fits 2024-2026 Ford Ranger models.

Protect your vehicle's most vulnerable undercarriage components during off-road excursions with the Rival Aluminum Gas Tank Skid Plate. Designed specifically for the 2024-2026 Ford Ranger, this plate provides a rugged shield against rocks, stumps, and trail debris that can cause costly damage to the fuel system. By utilizing high-strength aluminum, Rival offers maximum puncture resistance while maintaining a low profile and minimizing added weight.

• Constructed from durable, lightweight aluminum for high-impact protection
• Direct bolt-on design using existing factory mounting points for a clean installation
• Corrosion-resistant finish ensures longevity in harsh environments
• Precision-engineered fit specifically for the fuel tank of the Ford Ranger
• Manufacturer Part Number: 2333.1888.2.6

Fits select 2021-2026 Ford Bronco and Ford Ranger models (including Raptor and Badlands trims).

Protect your engine's oil pan and vital underbody components with the RIVAL premium engine skid plate. Engineered from deep-stamped 1/4-inch (6mm) aluminum alloy, this plate provides superior strength for rock crawling and overlanding while maintaining a lower weight profile than traditional steel plates. The deep-stamping process increases the structural rigidity of the alloy, ensuring it can withstand direct impacts from rocks, logs, and debris on the trail.

Installation is a direct-fit process utilizing existing factory mounting points, requiring no drilling or cutting of the vehicle frame. Because of the natural corrosion resistance of high-grade aluminum, the plate will not rust even if the surface is gouged or scratched by trail obstacles.

• Material: High-strength 1/4-inch (6mm) aluminum alloy
• Construction: Deep-stamped for increased structural rigidity
• Finish: Natural corrosion-resistant properties
• Installation: No-drill, bolt-on fitment to factory points
• Manufacturer Part Number: 2333.1885.1.6

Fits select 2015-2025 Ford F-150 (EcoBoost Only).

Protect your truck's vital underbody components with this Rival premium transmission and catalytic converter skid plate. Precision engineered from deep-stamped 1/4-inch (6mm) aluminum alloy, this plate offers a superior strength-to-weight ratio, shielding your drivetrain from rocks, trail debris, and potential catalytic converter theft without significantly increasing vehicle mass.

• Manufactured from 1/4-inch (6mm) aluminum alloy for maximum impact resistance and weight efficiency.
• Protects both the transmission housing and catalytic converters from off-road damage and tampering.
• Naturally corrosion-resistant aluminum construction prevents rust, even if the finish is gouged or scratched.
• Direct bolt-on installation to factory mounting points with no drilling or cutting required.
• Deep-stamped ribs provide additional structural rigidity and a precise OE-style fit.
• Manufacturer Part Number: 2333.1857.2.6

Protect your vehicle's critical underbody components with the Rival Steel Lower Skid Plate. Engineered for the rigors of off-road traversal, this skid plate provides a robust shield against rocks, logs, and trail debris that can cause costly damage to your chassis and drivetrain.

Fits select 2007-2025 Jeep Wrangler (JK/JL) and 2020-2025 Jeep Gladiator models (excluding Mojave trims).

Constructed from laser-cut, 0.1-inch thick steel, the plate undergoes a deep stamping process to increase structural rigidity without adding unnecessary weight. The low-profile design ensures minimal impact on ground clearance while maximizing coverage. Installation is straightforward and requires no drilling, as it is designed to bolt directly to existing factory mounting points for a secure fit.

• Precision laser-cut 0.1" thick steel construction
• Deep stamped for enhanced strength and durability
• Direct-fit, no-drill installation using factory mounting points
• Protects underbody components from trail hazards and scrapes
• Compatible with Jeep Wrangler (2007-2025) and Gladiator (2020-2025)
• Manufacturer Part Number: 2111.2761.1.3

Fits select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models. Provide your Jeep with essential underbody protection and auxiliary off-road lighting in a single, streamlined component.

The ORACLE Lighting 5883-006 skid plate is engineered to shield the factory sway bar and steering box from trail obstacles. This heavy-duty unit is formed from 3/16" steel plate and finished in a durable satin black powdercoat. Integrated directly into the plate are nine high-output 15W LED emitters, delivering a combined 9,000 lumens of yellow light with a focused 30-degree beam pattern for enhanced visibility in dust, fog, or dark trails.

Designed for a straightforward, no-drill installation, this skid plate bolts directly to factory mounting points and includes a complete switched relay wiring harness. The LED modules are individually replaceable and carry an IP68 ingress protection rating for reliable performance in wet or muddy conditions. Note: Gladiator Mojave models require shock reservoir relocation for proper fitment.

• Material: 3/16" Steel plate with satin black powdercoat
• Lighting: 9x 15W LED Emitters (135W Total)
• Brightness: 9,000 Lumens
• Color Temperature: Yellow
• Beam Angle: 30° precision optics
• Ingress Protection: IP68 waterproof/dustproof
• Electrical: 6A @ 12V DC draw
• Certification: Modules are DOT, SAE, and E9 marked
• Included: Skid plate, wiring harness with switch, and installation hardware
• Manufacturer Part Number: 5883-006

Fits select 2018-2025 Jeep Wrangler JL and 2020-2025 Jeep Gladiator JT models. This heavy-duty ORACLE Lighting skid plate provides essential underbody protection for your steering box and sway bar while integrating high-output illumination into a single unit. Formed from 3/16" steel with a durable satin black powdercoat finish, it is designed to withstand the rigors of off-road use.

The system features nine high-output 15W LED modules with precision optics, producing a focused 30º beam for enhanced trail visibility. Each module is IP68 rated for dust and water ingress protection and can be individually replaced if damaged. This skid plate is designed to work with factory-style bumpers and offers a simple, no-drill installation using factory mounting points. Note: Mojave Gladiator models require a shock reservoir relocation for proper fitment.

• Manufacturer Part Number: 5883-001
• Material: 3/16" Steel Plate
• Finish: Satin Black Powdercoat
• LED Configuration: 9x 15W High-Output Emitters (Clear)
• Total Wattage: 135W
• Total Lumens: 9000Lm
• Power Draw: 6A @ 12V DC
• Beam Angle: 30º
• Ingress Protection: IP68
• Compliance: Modules are DOT, SAE, and E9 Marked
• Includes: Skid plate, 9 LED modules, switched relay wiring harness, and hardware

Fits 2023-2025 Nissan Z Performance, Sport, and Proto Spec models.

The factory splash shield on the Nissan Z is primarily designed to deflect water and dirt, offering minimal defense against road debris or bottoming out. The Mishimoto engine skid plate provides a significant upgrade in protection, replacing the flimsy OE unit with 3mm-thick aluminum. Finished in a durable wrinkle black powder coat, this plate is engineered to protect the Z's vulnerable plastic oil pan from impacts on the street or the track.

This skid plate features a functional large vent with pre-installed foam shrouding, creating a low-pressure zone that extracts heat from the engine bay while improving airflow through the cooling stack. Maintenance is simplified via a removable service panel secured with three bolts and threaded inserts, allowing for oil changes without the need to drop the entire plate. Designed as a direct bolt-on, it utilizes factory mounting points to eliminate the need for drilling or cutting.

• Fabricated from 3mm-thick aluminum for superior impact resistance
• Durable wrinkle black powder-coated finish
• Protects engine components and plastic oil pan from debris
• Integrated vent improves engine bay heat extraction
• Removable service panel for fast oil and filter changes
• No-drill installation using factory mounting points
• Manufacturer Part Number: MMSD-Z-23WBK
• Mishimoto Lifetime Warranty

Fits select 2021-2026 BMW M2, M3, and M4 models (Base, Competition, xDrive, CS, and CSL). While the G8X platform delivers exceptional performance, its factory oil cooler is mounted parallel to the road on the undercarriage, leaving it highly vulnerable to road debris, speed bumps, and bottoming out. The Mishimoto MMSD-G80-21WBK Skid Plate provides the robust protection needed to prevent catastrophic oil loss and engine damage.

Constructed from high-strength aluminum with a durable wrinkle black powder-coated finish, this skid plate is designed for maximum resilience. It features a precision cross-cut pattern that ensures consistent airflow to the oil cooler core while maintaining structural integrity. The design also retains the factory air dam to preserve the optimized pressure differential required for efficient cooling. Installation is a direct bolt-on process that utilizes factory mounting points with no cutting or permanent modifications required.

• Direct fit for 2021-2026 BMW G80/G82/G87 chassis
• Manufactured from high-strength aluminum for superior impact protection
• Retains factory air dam for optimized airflow through the oil cooler
• Cross-cut design balances protection with essential cooling performance
• Corrosion-resistant wrinkle black powder-coated finish
• No cutting or drilling required for installation
• Mishimoto Lifetime Warranty
• MPN: MMSD-G80-21WBK

Fits 2015-2020 BMW M3 and M4 models, including Base, CS, and GTS trims. The Mishimoto Skid Plate provides essential protection for the F8X platform, specifically shielding the vulnerable, low-hanging engine oil cooler and oil pan from road debris and impacts. This direct-fit upgrade replaces the flimsy factory plastic shielding with a high-strength aluminum plate designed for durability and performance.

• Constructed from high-strength aluminum with a corrosion-resistant, textured black powder-coated finish.
• Features a specially designed removable diffuser and preinstalled foam to optimize airflow through the oil cooler.
• Designed with a front cutout to ensure compatibility with aftermarket CSL-style front lips.
• Compatible with both the factory BMW oil cooler and the Mishimoto performance oil cooler.
• Direct-fit installation to factory mounting points; all necessary hardware is included.
• Manufacturer Part Number: MMSD-F80-15WBK.
• Backed by the Mishimoto Lifetime Warranty.

Fits select 2015-2020 BMW M3 and M4 models.

This Mishimoto replacement diffuser is engineered specifically for use with the Mishimoto 2015-2020 BMW F80 M3/M4 Skid Plate (MMSD-F80-15). It functions by creating a strategic low-pressure zone directly behind the oil cooler, which actively pulls air through the core to enhance thermal management and cooling efficiency during high-performance driving. The design allows for easy removal, providing a quick solution for drivers who need additional ground clearance for specific terrain or transport. Built for durability and precise fitment, this component is backed by the Mishimoto Lifetime Warranty.

• Specifically designed for use with Mishimoto Skid Plate (MMSD-F80-15)
• Creates a low-pressure zone behind the oil cooler to maximize airflow evacuation
• Improves cooling system efficiency by maintaining high-velocity air throughput
• Easily removable design for increased ground clearance when required
• Precision-engineered for 2015-2020 BMW M3 and M4 chassis
• Manufacturer Part Number: MMRP-F80SD-DIF

Fits 2020-2022 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD.

The ICON Vehicle Dynamics front splash guard kit addresses clearance limitations found on high-performance suspension systems. On 2020-2022 GM HD trucks, the increased down travel provided by ICON suspension can cause the sway bar to contact the stock plastic splash guard at full extension. This heavy-duty kit replaces the vulnerable factory unit, eliminating the need for trimming while offering significantly more rigidity.

Engineered for durability, this splash guard is constructed from 1/8-inch CNC laser-cut and brake-formed aluminum. It features a semi-gloss black powder coat finish to resist corrosion and harsh trail conditions. The bolt-on design ensures a straightforward installation as a direct replacement for the OEM plastic component.

• Increases sway bar clearance when suspension is at full droop
• CNC laser-cut, brake-formed 1/8-inch aluminum plate construction
• Stronger and more rigid than the OE plastic splash guard
• Durable semi-gloss black powder coat finish
• ICON Vehicle Dynamics Limited Lifetime Warranty
• Manufacturer Part Number: 77202

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia equipped with the TRD Off-Road or TRD Pro aluminum skid plate.

The ICON Vehicle Dynamics TRD Aluminum Skid Plate Spacer Kit (MPN: 55164) is designed to solve clearance issues between the factory TRD skid plate and the front sway bar. This kit is essential when installing ICON Front Sway Bar Drop Brackets, as it slightly lowers the skid plate to provide the necessary room for full, bind-free suspension travel. By adjusting the skid plate height, you maintain complete protection and functionality without component interference.

• Precision CNC machined and zinc-plated steel spacers/sleeves for durability and corrosion resistance.
• Ensures adequate clearance between the sway bar and TRD skid plate during suspension cycling.
• Includes high-strength Grade 8 mounting hardware for a secure installation.
• Straightforward, 100% bolt-on design for easy installation on factory mounting points.

Fits select 2021-2023 Ford F-150 4x4 models (excluding Lightning).

Enhance your vehicle's off-road durability with the Ford Performance Front Skid Plate Kit. This kit is designed to replace the factory front air dam with a heavy-duty steel bash plate, providing essential protection for the transmission and transfer case against rock damage and trail debris. Finished in a durable silver coating, this bash plate is the same equipment found on the F-150 Tremor package, offering a rugged aesthetic and factory-level fitment.

• Replaces factory front air dam with a durable steel bash plate
• Protects critical transmission and transfer case components
• Silver powder-coated finish for corrosion resistance and style
• Factory equipment on F-150 Tremor Package
• Designed for 4x4 equipped vehicles (2021 MY built after June 2021)
• Not compatible with F-150 Lightning models
• Manufacturer Part Number: M-5018-FSP

Fits 2022-2024 Ford Bronco Raptor.

Protect your vehicle's fuel system during demanding off-road excursions with the Ford Performance Bronco Raptor Fuel Tank Skid Plate kit. This kit utilizes the original equipment (OE) skid plate found on Raptor models, providing heavy-duty underbody shielding against jagged rocks, stumps, and trail debris.

Constructed to meet rigorous factory standards, this skid plate ensures precise fitment and maximum coverage for the fuel tank. The kit is designed for a straightforward installation, bolting directly to the vehicle using the included factory-spec hardware and fasteners.

• Genuine Ford Performance Bronco Raptor OE fuel tank skid plate
• Provides robust underbody protection for off-road environments
• Direct-fit installation to factory mounting points
• Includes all necessary fasteners and mounting hardware
• Manufacturer Part Number: M-5018-BRF

Fits 2016-2023 Toyota Tacoma models equipped with a manual transmission. This Cali Raised Transfer Case Skid Plate provides essential underbody protection for one of the most vulnerable components on your drivetrain, shielding it from impact damage caused by rocks, stumps, and trail debris.

Constructed from heavy-duty steel and finished in a durable black powder coat, this skid plate is designed to withstand the rigors of off-roading while resisting corrosion. The precision-engineered design ensures a direct fit to the vehicle's chassis, utilizing existing mounting points for a secure installation that doesn't sacrifice ground clearance.

• Fits 2016-2023 Toyota Tacoma (Manual Transmission only)
• Heavy-duty steel construction for superior impact resistance
• Durable powder-coated finish for long-term corrosion protection
• Vehicle-specific design ensures precise fitment
• Part Number: CR3652

Fits select 2018-2024 Jeep Wrangler (JL) and 2020-2024 Jeep Gladiator (JT) equipped with Body Armor 4x4 front bumpers.

Protect your vehicle's critical undercarriage components with the Body Armor 4x4 Front Bumper Skid Plate. This heavy-duty armor is specifically engineered to shield the factory electronic sway bar disconnect system found on Rubicon models, which is often left vulnerable to rock strikes and trail debris after installing an aftermarket bumper.

Fabricated from 3/16-inch steel plate, this skid plate provides a rugged barrier against obstacles while maintaining a sleek profile. The two-stage black powder coat finish features a light texture for superior corrosion resistance and durability. This accessory is a direct bolt-on for all Body Armor 4x4 JL-series front bumpers, ensuring a secure and precise fit without the need for custom fabrication.

• Precision fabricated from 3/16-inch steel plate
• Shields vulnerable electronic sway bar disconnect and undercarriage components
• Durable black two-stage powder coat finish with a light texture
• Direct bolt-on design for all Body Armor 4x4 JL front bumpers
• Engineered for high-clearance off-road protection
• Manufacturer Part Number: JL-5123

Fits 2021-2024 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, and Wildtrak).

Off-roading exposes your vehicle's low-hanging rear shock mounts to significant impact risks from rocks, stumps, and trail debris. BMR Suspension Rear Shock Mount Skid Plates (SG1860H) provide a rugged, sacrificial barrier designed to shield your shocks and mounting hardware from damage that could otherwise end your day on the trail. These plates are engineered to withstand the rigors of aggressive off-road use while remaining practical for daily street driving.

• Replaces vulnerable factory mounting exposure with heavy-duty protection
• Durable black hammertone powder coat finish for superior corrosion resistance
• Bolt-on installation to reinforce critical suspension points
• Designed specifically for full-size Bronco chassis (excludes Bronco Sport)
• Manufacturer Part Number: SG1860H

Fits 2004-2006 Pontiac GTO.

Protect your engine's oil pan and critical front-end components with the BMR aluminum skid guard. This heavy-duty plate is designed to replace the fragile factory plastic shields, providing a robust barrier against road debris, speed bumps, and potential impacts that can occur on lowered vehicles or during spirited driving.

• Fabricated from lightweight aluminum for high strength without excessive weight
• Precision laser-cut BMR logo for a clean, custom look
• Direct bolt-on replacement for the OE splash shield
• Protects the engine oil pan and front crossmember
• Bare aluminum finish
• Manufacturer Part Number: SG001L

Fits 2004-2006 Pontiac GTO.

Protect your vehicle's oil pan and critical front chassis components with the BMR SG001H Aluminum Skid Guard. Specifically designed for the 2004-2006 Pontiac GTO, this protective plate is an essential upgrade for lowered vehicles or cars driven in areas with road debris and steep inclines. The lightweight aluminum construction ensures maximum protection without compromising performance or adding significant front-end weight.

• Part Number: SG001H
• Material: High-strength lightweight aluminum
• Finish: Black Hammertone powder coat for superior corrosion resistance
• Fitment: 2004-2006 Pontiac GTO
• Installation: Direct bolt-on design utilizing factory mounting points

Fits 2018-2025 Jeep Wrangler JL and Gladiator JT.

The Artec Industries Nighthawk Front Swaybar Skid is designed to provide essential armor for the vulnerable front steering and sway bar components on your Jeep. On the trail, the electronic sway bar disconnect motor and steering gear are susceptible to impact damage from rocks and debris; this skid plate offers a heavy-duty barrier to prevent costly trail failures. As part of the Nighthawk series, it is engineered for a precise fit that maintains maximum ground clearance while offering superior protection.

• Compatible with 2018-2025 Jeep Wrangler JL and Gladiator JT models
• Shields factory sway bar components and steering gear from off-road impacts
• Heavy-duty construction designed for rugged trail use
• Bolt-on installation for a secure, integrated fit
• Manufacturer Part Number: JL5304

Fits 2021-2025 Jeep Wrangler JL Sahara 2-Door models equipped with the 3.6L engine.

Shield your drivetrain from costly trail damage with the Artec Industries Full Aluminum Bellypan. Engineered to provide comprehensive underbody coverage, this skid plate system protects critical components like the engine, transmission, and transfer case from rocks and debris. Constructed from high-strength aluminum, it offers the impact resistance needed for serious off-roading without the significant weight penalty of traditional steel plating.

This bellypan is designed with maintenance in mind, featuring a dedicated oil door that allows you to perform routine oil changes without removing the entire assembly. It bolts directly to factory mounting points for a secure fit that maintains maximum ground clearance.

• High-grade aluminum construction for lightweight strength and corrosion resistance
• Full-length protection from the engine to the transfer case
• Integrated oil door simplifies routine engine maintenance
• Precision-engineered for the Jeep Wrangler JL 2-Door chassis
• All necessary mounting hardware included
• Manufacturer Part Number: JL4167

Fits 2018 Jeep Wrangler JL Sahara 4-Door (3.6L).

Protect your vehicle's vulnerable undercarriage from trail damage with the Artec Industries Full Bellypan. Precision-engineered from aluminum, this skid system offers comprehensive protection for critical drivetrain components while minimizing added weight. This bellypan includes an integrated oil door, allowing you to perform oil changes and routine maintenance without the labor-intensive process of removing the entire skid plate.

• Direct fit for 2018 Jeep Wrangler JL Sahara 4-Door models
• Lightweight aluminum construction provides durable underbody protection
• Integrated oil door simplifies maintenance and oil changes
• Designed to maximize ground clearance and protect the undercarriage
• Manufacturer Part Number: JL4125

Fits 2012-2018 Jeep Wrangler JK 4-Door models.

The Artec Industries Under Armor Bellypan Kit (JK1010) provides comprehensive underside protection for your Jeep Wrangler JK. This heavy-duty skid plate system is engineered to shield vital drivetrain components from trail obstacles, rocks, and debris, ensuring your vehicle remains operational in the most demanding off-road environments. Designed specifically for the updated drivetrain and exhaust layouts of the later JK models, this kit offers a high-clearance solution for maximum trail performance.

• Specifically designed for 2012-2018 4-door Jeep Wrangler JK models
• Provides full-length belly coverage to protect the engine, transmission, and transfer case
• Heavy-duty construction designed for extreme off-road impacts
• Low-profile design maintains maximum ground clearance
• Compatible with Artec Under Armor modular skid system components
• Manufacturer Part Number: JK1010

Fits select 2021-2025 Ford Bronco models including Badlands, Big Bend, Outer Banks, and Wildtrak.

The ARB Under Vehicle Protection (UVP) system provides essential armor for the Ford Bronco's most vulnerable driveline components. This four-panel system replaces factory plastic or thin-gauge shields with heavy-duty 3mm laser-cut, press-formed, and folded steel plates. These panels bolt directly to the chassis to provide continuous protection from the front bumper to the rear of the transfer case, shielding the steering, engine sump, transmission, and transfer case from trail impacts and debris.

Each panel features a return edge for maximum structural rigidity and is finished in a silver textured powder coat over zinc plating for superior corrosion resistance. ARB designed these panels for practical use; while they must be removed for full vehicle servicing to allow a thorough inspection for trail damage or dirt buildup, a removable insert in the second panel provides convenient access for engine oil changes. This kit is compatible with ARB front bumpers and the factory bumper.

• 4-panel system protecting steering, engine, transmission, and transfer case
• 3mm laser-cut, press-formed, and folded sheet steel construction
• Zinc-plated and silver textured powder coat finish
• Recessed mounting bolts to prevent head damage on obstacles
• Direct-to-chassis mounting for superior strength
• Includes all necessary hardware and illustrated fitting instructions
• Manufacturer Part Number: 5480100

Fits select 2005-2023 Toyota Tacoma models including Base, SR, SR5, TRD Off-Road, TRD Pro, and TRD Sport.

Off-road terrain presents unexpected obstacles that can cause severe damage to your vehicle's drivetrain. While bumpers and rock sliders protect the body panels, ARB Under Vehicle Protection (UVP) panels shield the vital components hidden underneath. This comprehensive skid plate system is designed to provide a continuous shield from the front of the vehicle to the transfer case, ensuring your steering, oil pan, transmission, and gearbox remain protected from impact and debris.

• Manufactured from 3mm laser-cut steel, pressed and folded for a superior strength-to-weight ratio compared to folded steel alone.
• Zinc-plated and powder-coated in a durable silver textured finish for long-lasting corrosion resistance.
• Bolts directly to the vehicle chassis to provide outstanding structural integrity and rigid support.
• Features recessed mounting bolts that are protected from rock damage and remain easy to remove for routine vehicle servicing.
• Includes all necessary hardware for a secure installation.
• Manufacturer Part Number: 5423010

Fits 2010-2024 Toyota 4Runner (Limited, Nightshade, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, and Venture).

While bumpers and rock sliders protect your body panels, the most critical components sit vulnerable beneath the chassis. The ARB Under Vehicle Protection (UVP) system provides a comprehensive shield for your 4Runner's steering, oil pan, transmission, and transfer case. Designed specifically for the Prado 150 platform, these skid plates offer heavy-duty armor for technical off-road terrain where unexpected obstacles can cause catastrophic drivetrain damage.

• High-Strength Construction: 3mm laser-cut steel is pressed and folded to provide a superior strength-to-weight ratio compared to traditional folded steel.
• Durable Finish: All steel components are zinc-plated and finished in a silver textured powder coat for maximum corrosion resistance.
• Secure Mounting: Bolts directly to the vehicle chassis to ensure structural integrity and proper load distribution during impacts.
• Service-Friendly Design: Recessed mounting bolts are protected from rock rash and debris but remain easily accessible for routine vehicle servicing.
• Included: Full Under Vehicle Protection Kit with panels and mounting hardware (MPN: 5421110).

Fits 2007-2014 Toyota FJ Cruiser and 2010-2024 Toyota 4Runner models (without KDSS).

Protect the critical components of your vehicle's under-carriage with the ARB Under Vehicle Protection (UVP) kit. While bumpers and rock sliders protect the body, the UVP system is designed to shield the steering, oil pan, transmission, and transfer case from damage caused by rocks, stumps, and debris. This kit provides a smooth, flat surface to help the vehicle slide over obstacles while maintaining structural integrity.

• Fabricated from 3mm laser-cut, pressed, and folded steel for an optimal strength-to-weight ratio.
• Zinc-plated and finished in a silver textured powder coat for superior corrosion resistance.
• Securely bolts to the vehicle's chassis to ensure high structural integrity.
• Recessed mounting bolts are protected from impact and remain accessible for easy removal during vehicle servicing.
• Specifically designed for non-KDSS equipped models to ensure proper fitment and clearance.
• Manufacturer Part Number: 5421100.

Fits 2008-2021 Toyota Land Cruiser Base and Heritage Edition (V8 Diesel).

Standard body panels and bumpers are rarely enough to protect a vehicle's vital components from serious trail damage. The ARB Under Vehicle Protection (UVP) Kit is engineered specifically for the Land Cruiser 200 Series to shield the most vulnerable under-carriage systems from rocks, stumps, and unexpected off-road obstacles. This comprehensive skid plate system provides end-to-end coverage, ensuring your steering assembly, oil pan, transmission, and transfer case remain protected in technical terrain.

Each panel is manufactured from 3mm laser-cut steel that has been pressed and folded to provide a superior strength-to-weight ratio compared to standard flat steel. The system mounts securely to the vehicle chassis to maintain structural integrity under impact, while recessed mounting bolts prevent head-shearing and ensure easy removal for routine vehicle servicing.

• Construction: 3mm laser-cut steel, pressed and folded for maximum rigidity.
• Finish: Zinc-plated and silver textured powder coat for superior corrosion resistance.
• Protection Areas: Comprehensive coverage for steering, oil pan, transmission, and transfer case.
• Installation: Securely bolts to factory chassis mounting points.
• Hardware: Includes recessed fasteners to protect bolt heads from trail damage.
• Manufacturer Part Number: 5415100