Your Z's factory splash shield is just that, a splash shield. It works to keep water and dirt out of the engine bay, but that's about all it does well. One well placed bump or unlucky rock and you can say goodbye to the stock splash shield, and if you're really unlucky, your engine.----The Mishimoto skid plate for the 2023+ Nissan Z provides unmatched protection and performance. This skid plate is constructed from 3mm-thick powder-coated aluminum that's built to withstand impacts on the street or the track. Our skid plate attaches to the front fascia and extends all the way back to the subframe, covering and protecting your Z's plastic oil pan. A large vent with pre-installed foam shrouding creates a low-pressure zone under the car to help draw heat out of the engine bay and pull fresh air through the cooling stack.----The one-piece construction and slotted rear mounting points make installation of the Mishimoto 2023+ Nissan Z skid plate is a breeze in about 30 minutes. Our skid plate reuses the factory mounting points, eliminating the need for any drilling, or cutting. Once installed, maintenance is made fast and mess-free thanks to the removable service panel. Our service panel is installed with just three bolts and threaded inserts, so there's no fumbling around with nuts or spacers for a simple oil change. Like all our 2023+ Nissan Z products, this skid plate is backed by our Mishimoto Lifetime Warranty for a lifetime of protection.

• Large vent extracts engine bay heat and improves airflow through cooling stack
• Protects engine bay and plastic oil pan from impacts and debris
• 3mm-thick powder-coated aluminum offers maximum durability

This Part Fits:

The engineers at BMW did an excellent job striking a balance between exceptional power and cooling in the latest generation of BMW G8X M2, M3, and M4 models. Unfortunately, this meant positioning components, namely the oil cooler, in precarious positions. Placed on the undercarriage and parallel to the road's surface, the G8X oil cooler is vulnerable to bumps, scrapes, debris, and other road hazards.--The engineers at Mishimoto recognized this shortcoming while developing the Mishimoto 2021+ BMW G8X M2, M3, and M4 performance oil cooler, and in true Mishimoto fashion, pushed the limits to construct the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate. This skid plate is constructed from high-strength aluminum and features a cross-cut design to protect your stock or Mishimoto performance oil cooler while still allowing ample airflow. It includes a corrosion-resistant black powder-coated finish and everything required for a smooth and simple installation – no cutting or modifications necessary!--As with all our products, the Mishimoto 2021+ BMW G8X M2/M3/M4 skid plate comes with our signature Mishimoto Lifetime Warranty for a lifetime of protection.

• Constructed from high-strength aluminum and powdercoated for a durable, corrosion-resistant finish
• Retains air dam for optimized pressure differential and airflow through oil cooler core
• Protects engine and oil cooler from damage

This Part Fits:

Upgrade your 2015-2020 BMW F80 M3/M4 with the Mishimoto Skid Plate for superior protection and performance. Designed for a direct-fit installation, this skid plate shields your engine and oil cooler from damage with its high-strength aluminum construction and durable, corrosion-resistant powder coating. ---- The specially designed diffuser and preinstalled foam optimize air flow to the oil cooler for improved performance when it matters most, and the diffuser is easily removable when more ground clearance is needed. Compatible with both stock and Mishimoto oil coolers with a front cutout for CSL lips, this skid plate offers versatility and precise fitment. ---- For dependable protection that's backed by a Lifetime Warranty, look no further than the Mishimoto Skid Plate.

• Constructed from high-strength aluminum and powder-coated for a durable, corrosion-resistant finish
• Improves airflow to oil cooler thanks to special diffuser and preinstalled foam
• Protects engine and oil cooler from damage

This Part Fits:

Designed for use with 2015-2020 BMW F80 M3/M4 Skid Plate (HYPERLINK TO MMSD-F80-15), this specially designed diffuser creates a low pressure zone behind the oil cooler to evacuate air for improved cooling capabilities. The diffuser is also easily removable for when more ground clearance is needed. Backed by Mishimoto Lifetime Warranty.

• Creates low pressure zone behind the oil cooler to evacuate air for improved cooling
• Designed for use with 2015-2020 BMW F80 M3/M4 Skid Plate
• Easily removable when more ground clearance is needed

This Part Fits:

The additional down travel provided by an ICON Vehicle Dynamics 2020-Up GM HD 2500/3500 suspension system can cause clearance issues between the sway bar and the stock splash guard as the suspension approaches full extension. Upon identifying the weakness with the OEM splash guard, ICON's engineers developed a heavy-duty unit to replace it with and eliminate the need for trimming the OEM unit. ICON's splash guard kit is constructed from 1/8" thick CNC laser cut aluminum and features a durable semi-gloss black powder coat finish.

• Increases sway bar clearance when suspension is at full droop
• CNC laser cut, brake-formed 1/8" aluminum plate construction
• Stronger and more rigid than OE plastic splash guard
• ICON Vehicle Dynamics Limited Lifetime Warranty
• Durable semi-gloss black powder coat finish

This Part Fits:

The ICON Vehicle Dynamics TRD Aluminum Skid Plate Spacer Kit for the 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia slightly lowers the skid plate that is part of the TRD Off Road Package available on certain submodels and standard on the TRD Pro. This kit is typically installed in conjunction with ICON’s Front Sway Bar Drop Bracket Kit, which may cause clearance issues between the sway bar and the TRD skid plate at certain points in the suspension travel. Installing this spacer kit and lowering the TRD skid plate slightly ensures adequate clearance between these components for full, bind free suspension travel as well as complete functionality of the skid plate. Featuring precision CNC machined steel spacers and grade 8 hardware, this easy to install kit is a must for any ICON suspension system installed on a Tundra or Sequoia equipped with a TRD skid plate.

• Lowers TRD skid plate to ensure clearance with ICON Sway Bar Drop Brackets
• CNC machined and zinc plated steel sleeves
• Grade 8 mounting hardware included
• Simple, bolt-on installation

This Part Fits:

Get the undercarriage protection you need for your new Raptor with the same skid plates that were used on the 2017 Ford Raptor Race truck. The Ford Performance Skid Plate Kit protects the transmission and transfer case from undercarriage rock damage. Made from powder coated 3/16 thick aluminum and designed to bolt on and fit the truck perfectly.

• Replaces Factory Front Air Dam w/Durable; Steel Front Bash Plate Finished In Silver
• Reference Instruction Sheet To Verify 2021 My Vehicle Fitment
• Fits All 2022 Plus F-150 4X4 Equipped Vehicles
• Fits 2021 F-150 4X4 Built After June 2021
• Factory Equipment On F-150 Tremor Package
• Steel Front Bash Plate Finished In Silver
• Replaces Factory Front Air Dam w/Durable
• Not Compatible With F-150 Lightning

This Part Fits:

This Part Fits:

Enhance your off-road experience with our robust 3/16" Steel Plate, specifically designed for all Body Armor 4x4 JL front bumpers. This bolt-on accessory features a durable two-stage powdercoat light texture finish in sleek black, ensuring both style and resilience. Engineered to protect the undercarriage and electronic sway bar disconnect on Rubicon models, it offers superior defense against the toughest terrains. Equip your vehicle with this essential upgrade and drive with confidence, knowing you're safeguarded by top-tier protection.

• Protects Under Carriage and Electronic Sway Bar Disconnect On Rubicon Models
• Bolt On Design For All Body Armor 4X4 JL Front Bumpers
• Two-Stage Powder Coat Light Texture Finish In Black
• 3/16" Steel Plate

This Part Fits:

This Part Fits:

ARB Under Vehicle Protection panels are designed to give protection to vital underbody components including steering, engine sump, transmission and transfer case. Laser cut, press formed and folded 3mm sheet steel is used in ARB UVP to provide superior strength. The ARB UVP to suit the Ford Bronco consist of four carefully designed panels. The front, sump and transmission and transfer case panels bolt directly to the chassis to provide continuous under vehicle protection from the front bumper to the rear of the transfer case. Each UVP panel includes a return edge to add strength to the 3mm panel. To retain the strength and protection required of an ARB UVP, full vehicle servicing will require the removal and refit of panels to obtain access to drain plugs and other service points. This provides an opportunity to check for damage and buildup of dirt and foreign matter. Provision is provided to drain engine oil only with removable insert in the second panel. ARB's UVP will fit with or without an ARB front bumper. Fitment has not been confirmed with other bumper designs.

• Four panels to help protect the front engine, front differential, rear engine sump, power steering, stabilizer bar, transmission, and transfer case
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• All steel components are protected with either powder coat or zinc plating
• 3mm press-formed, folded sheet steel adds superior strength
• Zinc plated and powder coated in a silver textured finish
• Kit Includes Illustrated Fitting Instructions
• Made from laser cut sheet steel

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Bumpers and rock sliders might save your body panels from dings and damage but most of the time, the serious damage happens where you cant see it - in the under-carriage. ARBs new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage. Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan, tranny and transfer cases will all be safe.

• Pressed and folded 3mm laser cut steel provides more strength than folded steel alone and allows optimum strength to weight ratio
• Securely bolted to the vehicle's chassis providing outstanding structural integrity
• All steel components are zinc-plated and powder coated in a silver textured finish
• Recessed mounting bolts are protected and easy to remove for vehicle servicing
• Under Vehicle Protection Kit

This Part Fits:

Our Rear Belly Skid Plate protects the bottom of your engine/oil pan when off-road. The skid features a removable panel for accessing the oil drain plug. The skid is finished in a micro-texture black powder coat, and it is made from 3.5mm steel. The skid is fully bolt-on.

• Compatible w/ DV8 & Factory Front Skid Plates

This Part Fits:

Our Front Skid Plate protects the bottom of your engine and intercooler, and it retains access to the oil filter. The skid can be paired with DV8’s Tacoma Centric Front Bumper or the factory front bumper, and it is compatible with the factory or DV8’s Rear Belly Skid Plate. The skid is made from 3.5mm steel, and it is finished in a micro-texture black powder coat. The install process is fully bolt-on.

• Micro-Texture Black Powder Coat Finish

This Part Fits:

Our Skid Plate protects the bottom of your engine and intercooler. The skid doesn’t cover the oil filter for easy oil changes. It utilizes four factory mounting points for a sturdy design and fully bolt-on install process. The skid plate can be paired with the OEM or DV8’s Rear Belly Skid Plate. The skid is made from steel, and it is finished in a micro-texture black powder coat.

• 3.5mm Steel Construction

This Part Fits:

Our Jeep Wrangler JL & Gladiator JT Sway Bar Disconnect Skid Plate features superior fitment and tight tolerances. This skid plate protects the disconnect motor for the sway bar from striking obstacles underneath your Jeep. Additionally, it also cleans up the look of the undercarriage by covering the exposed frame horns/crash bar when running an aftermarket bumper. The vented steel plates allow for airflow to the engine bay, aiding in preventing overheating from high RPMs. It features 4 mounting points to provide extra strength and support when driving off-road. Since it utilizes factory mounting points, it is fully bolt-on and requires no drilling or modifications, offering a simple installation.

• Covers frame horns/crash bars when factory bumper removed.
• 4 mounting points for extra strength when off-roading.
• Utilizes factory mounting points (no drilling)
• Protect Rubicon Sway-Bar disconnect motor.
• Vented to allow airflow to engine bay.

This Part Fits:

This Dana 30 front differential skid plate protects the pinion area and lower housing from rock impacts on Jeep Wrangler JK models. It helps prevent diff cover leaks and reduces hang-ups on obstacles. Designed only for the factory Dana 30 axle and not compatible with Dana 44 or aftermarket diff covers. Features multiple mounting points, a micro-texture black powder coat finish, and a simple bolt-on install.

• Prevent front diff leaking from rock scraps (the pressure of the rocks scraping will actually pull back the diff cover allowing oil to leak)
• Compatible Only with the Dana 30 Front Axle, Not Compatible with the Dana 44
• Pinion skid plate to prevent you from getting hung up on those pesky rocks.
• Multiple mounting locations for added durability with off-roading.
• Will not work with aftermarket diff covers
• Micro-Texture Black Powder Coat Finish
• Bolt-On Installation

This Part Fits:

When taking your rig off-road on difficult trails, damage to the underbody becomes a concern. Our Trailing Arm Skid Plates provide wraparound protection to the trailing arm mounting component. Featuring a bolt-on installation, they protect one of the lowest hanging frame mounts on the vehicle. Finished with a micro-texture black powder coat, it blends in with the rest of the OEM undercarriage. * Please Note: This is only compatible with Trailing Arm Mounts that have the OEM welded skid plate.

• Heavy duty frame-side trailing arm skid plate to prevent you from getting hung up on those pesky rocks.
• Wraparound design to offer the most protection for this crucial mounting component.
• Compatible with vehicles that have the welded on OEM skid plate.
• Protects one of the lowest hanging frame mount on the vehicle
• Complements the factory structure.

This Part Fits:

Our Bronco Rear Shock Skids were designed to protect the rear shocks & lower links from damage on the trail. These skids are located on the lowest part of the rear axle, which helps you to slide right off of obstacles beneath you. Both the shock & link mount skids are a single piece, rather than separate skids, and tying them together improves their strength.

• Compatible with Most Lift Kits & Aftermarket Links
• Compatible with Most Aftermarket Shocks
• Protects Rear Shocks & Lower Links
• Micro-Texture Black Powder Coat
• Simple Bolt-On Installation
• Utilizes Factory Hardware
• 3.5mm Steel Plating

This Part Fits:

DV8 Offroads Bronco Rear Diff Skid Plate shields the differential, gasket seal, & pinion from damage by rocks underneath the Bronco. Branching out from the center skid is additional steel plating that protects the full length of the rear axle from link mount to link mount. There are multiple drain holes in several locations to release any water or mud that might collect in the skid plate while off-road.

• Protects the Rear Diff, Gasket Seal, Pinion, Rear Axle, & Upper Link Mount
• 8 Individual Mounting Locations for Maximum Durability
• Compatible with 2- & 4-Door Broncos Across all Trims
• Micro-Texture Black Powder Coat
• Bolt-On Direct Fit Installation
• Paintable Aluminum Logo Plate
• 4mm & 5mm Steel Construction
• Includes Drain Holes

This Part Fits:

DV8 Offroad's A-Arm Skid Plate for the 2021+ Bronco was designed to protect the aluminum front, lower control arms from rocks and other obstacles on the trail. Made from 3.5mm steel and finished in a micro-texture black powder coat, it also shields the vulnerable shock bolts from damage.These skid plates have an easy bolt-on installation and are compatible with all Bronco trims, including Sasquatch & non-Sasquatch package equipped vehicles.

• BOLT-ON INSTALLATION & HARDWARE IS INCLUDED
• MICRO-TEXTURE BLACK POWDER COAT FINISH
• PROTECTS A-ARM & FACTORY SHOCK BOLTS
• 3.5MM STEEL CONSTRUCTION
• SOLD AS A PAIR

This Part Fits: