Vibrant Performance 321 stainless steel mandrel bends are engineered for extreme heat environments where standard 304 stainless might fail. Titanium stabilization allows this 18-gauge tubing to maintain its structural integrity and tensile strength at sustained temperatures between 800°F and 1500°F (427°C to 816°C). This makes it the industry-standard choice for forced induction applications, including custom turbo manifolds, downpipes, and high-heat exhaust sections.

Each 90-degree sweep is mandrel-bent to ensure a uniform diameter throughout the bend, preserving optimal flow velocity and minimizing backpressure. Compared to 304, 321 stainless steel offers superior resistance to intergranular corrosion and is significantly more resilient against stress-related cracking during the intense thermal cycling common in racing and turbocharged systems.

• Material: 321 Stainless Steel
• Outside Diameter (OD): 1.75 in. (44.45mm)
• Center Line Radius (CLR): 2.625 in.
• Wall Thickness: 18 Gauge (0.049 in.)
• Bend Angle: 90 Degrees
• Manufacturer Part Number: 13862

Vibrant Performance 321 Stainless Steel 90-degree mandrel bends are engineered for extreme-duty fabrication where standard 304 stainless may lose structural integrity. This 13860 mandrel bend is specifically optimized for high-heat environments, performing reliably at prolonged operating temperatures between 800°F and 1500°F (427°C to 816°C), making it the industry standard for forced induction applications and high-performance exhaust manifolds.

The 321 alloy features superior corrosion resistance and withstands tensile stress and thermal fatigue better than 304 series stainless. Mandrel bending ensures a uniform cross-section throughout the radius to maintain maximum exhaust gas velocity and minimize backpressure.

• Material: 321 Stainless Steel
• Bend Angle: 90 Degrees
• Outer Diameter (OD): 1.50 in
• Center Line Radius (CLR): 2.25 in
• Wall Thickness: 18 Gauge
• MPN: 13860

Vibrant Performance 321 Stainless Steel mandrel bends are engineered for extreme heat environments where standard 304 stainless steel may become brittle. This 180-degree bend is specifically recommended for high-temperature forced induction applications, maintaining its structural integrity at sustained operating temperatures between 800°F and 1500°F (427°C to 816°C).

Constructed with a 16-gauge wall thickness, 321 SS offers superior corrosion resistance and better resistance to tensile stress and stress fractures than 304 SS. The mandrel bending process ensures a consistent internal diameter throughout the bend, preventing flow restrictions in custom exhaust manifolds, downpipes, and turbocharger plumbing.

• Material: 321 Stainless Steel
• Bend Angle: 180 Degrees
• Outer Diameter (OD): 2.50in
• Center Line Radius (CLR): 3.75in
• Wall Thickness: 16 Gauge
• Temperature Range: 800°F to 1500°F
• Part Number: 13848

This Vibrant Performance 180-degree mandrel bend is engineered for high-heat automotive fabrication, specifically where 304 stainless steel might fail. Constructed from 16-gauge 321 stainless steel, this tubing maintains its structural integrity and resists tensile stress fractures at prolonged operating temperatures ranging from 800°F to 1500°F (427°C to 816°C).

Its superior resistance to heat and corrosion makes it the ideal choice for forced induction applications, turbo manifolds, and high-performance exhaust downpipes. The mandrel bending process ensures a uniform diameter throughout the bend, maximizing exhaust flow and reducing turbulence.

• Material: 321 Stainless Steel
• Outside Diameter (OD): 1.50in
• Center Line Radius (CLR): 2.25in
• Wall Thickness: 16 Gauge (0.065in)
• Bend Angle: 180 Degrees
• Temperature Rating: 800°F to 1500°F
• Manufacturer Part Number: 13840

This Vibrant Performance 180-degree mandrel bend is engineered from premium 321 stainless steel, specifically designed to withstand the extreme thermal cycles common in forced induction and high-performance exhaust fabrication. Unlike 304 stainless, 321 alloy is stabilized with titanium to prevent carbide precipitation and maintain structural integrity at prolonged operating temperatures ranging from 800°F to 1500°F (427°C to 816°C).

The mandrel bending process ensures a uniform cross-section throughout the entire 180-degree sweep, minimizing turbulence and maintaining consistent exhaust gas velocity. This 18-gauge wall thickness tubing offers an ideal balance of weight reduction and tensile strength, making it the preferred choice for custom headers, turbo manifolds, and wastegate plumbing where stress fractures must be avoided.

• Material: 321 Stainless Steel
• Outer Diameter (OD): 2.50 in
• Center Line Radius (CLR): 3.75 in
• Wall Thickness: 18 Gauge (0.049 in)
• Bend Angle: 180 Degrees (U-Bend)
• MPN: 13828

This Vibrant Performance 180-degree mandrel bend is fabricated from 321 stainless steel, specifically engineered to outperform standard 304 stainless in extreme thermal environments. Stabilized with titanium, 321 stainless steel is highly resistant to intergranular corrosion and excels during prolonged exposure to temperatures ranging from 800°F to 1500°F (427°C to 816°C). This makes it the preferred material for high-stress forced induction applications, including turbo manifolds and downpipes.

The mandrel bending process maintains a consistent internal diameter throughout the 180-degree sweep, ensuring maximum exhaust flow and structural integrity. With 18-gauge wall thickness, this bend provides a lightweight yet durable solution for professional fabricators requiring components that can withstand high tensile stress and thermal cycling without fracturing.

• Material: 321 Stainless Steel (Titanium Stabilized)
• Outside Diameter (OD): 1.50 in
• Center Line Radius (CLR): 2.25 in
• Wall Thickness: 18 Gauge (0.049 in)
• Bend Angle: 180 Degrees
• Operating Temp Range: 800°F to 1500°F
• Manufacturer Part Number: 13820

Vibrant Performance 321 Stainless Steel straight tubing is engineered for extreme environments where standard 304 stainless might fail. Specifically designed to withstand prolonged operating temperatures between 800°F and 1500°F (427°C to 816°C), this 16-gauge tubing is the preferred choice for forced induction systems, custom exhaust manifolds, and high-heat turbocharger applications.

The addition of titanium in the 321 alloy provides superior resistance to intergranular corrosion and handles tensile stress and thermal fractures more effectively than 304 stainless at elevated temperatures. This makes it an ideal material for professional fabricators building high-performance exhaust components that require maximum durability under thermal load.

• Material: 321 Stainless Steel
• Outside Diameter: 2.50in
• Length: 39.375in (1 Meter)
• Wall Thickness: 16 Gauge (0.065in)
• Operating Temp Range: 800°F to 1500°F (427°C to 816°C)
• Manufacturer Part Number: 13788

Vibrant 321 Stainless Steel straight tubing is engineered for extreme-heat environments where standard 304 stainless might fail. This 1.50-inch OD tubing is specifically recommended for forced induction applications, maintaining structural integrity during prolonged exposure to temperatures ranging from 800°F to 1500°F (427°C to 816°C).

Compared to 304 stainless, the 321 alloy provides superior corrosion resistance and significantly better resistance to tensile stress and stress fractures. This makes it a critical component for fabricating turbo manifolds, downpipes, and other high-temperature exhaust components that undergo intense thermal cycling.

• Material: 321 Stainless Steel
• Outside Diameter: 1.50 in
• Wall Thickness: 16 Gauge (0.065 in)
• Operating Temperature Range: 800°F to 1500°F (427°C to 816°C)
• Finish: Mill finish
• Manufacturer Part Number: 13780

Vibrant Performance 321 Stainless Steel straight tubing is engineered for high-performance exhaust and forced induction applications where standard 304 stainless steel reaches its thermal limits. This 18-gauge wall tubing offers exceptional structural stability at prolonged operating temperatures ranging from 800°F to 1500°F (427°C to 816°C).

The stabilized 321 alloy provides superior resistance to intergranular corrosion and maintains higher fatigue strength compared to 304 series steel. These properties make it the preferred choice for turbo manifolds, downpipes, and wastegate plumbing, as it better withstands the tensile stress and vibration common in extreme heat environments. This tubing is ideal for fabricators building professional-grade forced induction systems.

• Material: 321 Stainless Steel
• Outside Diameter (O.D.): 3.000 in.
• Wall Thickness: 18 Gauge (0.049 in.)
• Operating Temperature: 800°F to 1500°F (427°C to 816°C)
• Application: Forced induction, high-temp exhaust systems
• Manufacturer Part Number: 13770

Vibrant Performance 321 Stainless Steel straight tubing is engineered for high-heat environments where standard 304 stainless steel may fail. This tubing is specifically designed to handle prolonged operating temperatures between 800°F and 1500°F (427°C to 816°C), making it the industry standard for forced induction exhaust manifolds, downpipes, and high-performance wastegate plumbing.

The 321 alloy offers superior resistance to intergranular corrosion and maintains higher tensile strength under extreme thermal stress compared to 304 series steel. With an 18-gauge wall thickness and a 2.5-inch outer diameter, this tubing provides an ideal balance of weight savings and durability for professional fabrication projects.

• Material: 321 Stainless Steel
• Outer Diameter: 2.5"
• Length: 39.375" (Approx. 1 Meter)
• Wall Thickness: 18 Gauge (0.049")
• Temperature Rating: 800°F to 1500°F
• Part Number: 13768

Vibrant Performance 321 Stainless Steel straight tubing is engineered for high-heat environments where standard 304 stainless may lose structural integrity. With a stable operating range between 800°F and 1500°F (427°C to 816°C), this 18-gauge tubing is specifically recommended for forced induction applications, including turbo manifolds, downpipes, and high-temperature exhaust sections.

Compared to 304, 321 stainless steel contains titanium for improved corrosion resistance and significantly higher resistance to tensile stress and thermal fractures. This 2.25-inch OD tubing provides the durability required for professional fabrication projects demanding consistent performance at elevated temperatures.

• Material: 321 Stainless Steel
• Outside Diameter: 2.25 in (57.15 mm)
• Wall Thickness: 18 Gauge (0.049 in)
• Operating Temperature: 800°F to 1500°F
• Manufacturer Part Number: 13766

Vibrant Performance 321 Stainless Steel straight tubing is engineered for extreme-heat environments where standard 304 stainless might fail. This 18-gauge tubing is specifically recommended for forced induction applications, such as turbo manifolds and downpipes, where components must withstand prolonged, elevated operating temperatures between 800°F and 1500°F (427°C to 816°C).

The addition of titanium in the 321 alloy provides superior stabilization against chromium carbide precipitation. This results in significantly better resistance to intergranular corrosion, tensile stress, and stress fractures compared to 304 stainless steel in high-performance exhaust environments.

• Material: 321 Stainless Steel
• Outside Diameter: 2.00in (50.8mm)
• Wall Thickness: 18 Gauge (0.049in)
• Operating Temperature: 800°F to 1500°F (427°C to 816°C)
• Finish: Raw/Unfinished
• Manufacturer Part Number: 13764

Vibrant 321 Stainless Steel Straight Tubing is engineered for extreme exhaust environments where standard 304 stainless might fail. Stabilized with titanium, 321 stainless steel is specifically designed to handle prolonged operating temperatures between 800°F and 1500°F (427°C to 816°C). This makes it an essential choice for high-heat applications such as turbo manifolds, downpipes, and other forced induction components.

Compared to 304 alloys, this 321 grade offers superior resistance to intergranular corrosion and withstands tensile stress and thermal expansion more effectively. This durability significantly reduces the risk of stress fractures and weld failures under heavy thermal cycling. Each section is manufactured with a precision 18-gauge wall thickness to provide an optimal balance of weight and structural integrity for custom fabrication projects.

• Material: 321 Stainless Steel
• Outer Diameter (O.D.): 1.50in
• Wall Thickness: 18 Gauge
• Operating Temperature: 800°F to 1500°F (427°C to 816°C)
• Application: Ideal for forced induction and high-heat exhaust systems
• Part Number: 13760

Vibrant Performance T304 Stainless Steel Pie Cuts are engineered for precision exhaust fabrication, allowing builders to create custom, tight-radius bends that standard mandrel-bent tubing cannot achieve. These pie cuts are ideal for high-clearance applications or complex routing in performance exhaust systems, cold air intakes, and turbo downpipes.

Constructed from high-quality T304 stainless steel, these sections offer superior corrosion resistance and excellent weldability for a professional finish. This set of six pieces provides the raw material needed to fabricate custom 45-degree or 90-degree elbows tailored to your specific engine bay or chassis constraints.

• Material: T304 Stainless Steel
• Outer Diameter (O.D.): 3.50 inches
• Quantity: Set of 6 pieces
• Manufacturer Part Number: 13635
• Designed for custom exhaust, intake, and intercooler piping fabrication

Vibrant Performance T304 Stainless Steel Pie Cuts provide the precision required for high-end custom fabrication. These segments allow fabricators to create tight-radius bends and complex exhaust paths where standard mandrel-bent elbows simply will not fit. Each piece is precision-cut to ensure a clean mating surface for consistent TIG welding.

Constructed from high-quality T304 stainless steel, these 3.00-inch O.D. segments offer superior corrosion resistance and durability in high-heat applications, making them ideal for custom turbo manifolds, downpipes, and intake piping. By combining multiple segments, you can achieve exact 45-degree, 90-degree, or unique multi-axial bends tailored to your specific chassis constraints.

• Material: T304 Stainless Steel
• Outside Diameter: 3.00 inches
• Quantity: Set of 6 segments
• Application: Custom exhaust, intake, and turbo plumbing
• Manufacturer Part Number: 13630

Vibrant Performance T304 Stainless Steel Pie Cuts provide a precise solution for fabricating custom, tight-radius exhaust bends. These 2.50-inch O.D. sections allow fabricators to create complex 45-degree or 90-degree elbows in tight engine bays or chassis locations where standard mandrel-bent tubing lacks the necessary clearance.

Constructed from high-quality T304 stainless steel, these pie cuts offer superior corrosion resistance and durability under extreme exhaust temperatures. Each piece is precision-cut and deburred, ensuring clean fitment and consistent wall thickness for high-quality TIG welding. This kit (MPN 13625) includes six individual pieces to facilitate professional-grade exhaust or intake fabrication.

• Material: T304 Stainless Steel
• Outer Diameter: 2.50 inches
• Quantity: Set of 6
• Application: Custom exhaust and intake tube fabrication
• MPN: 13625

Vibrant Performance T304 Stainless Steel Pie Cuts provide a precise solution for fabricating custom exhaust bends in tight engine bays or chassis configurations where standard mandrel bends may not fit. These 2.25-inch O.D. sections allow for the construction of professional-grade 45-degree or 90-degree elbows with a clean, high-end look.

Each piece is precision-cut from high-quality T304 stainless steel to ensure excellent corrosion resistance and superior weldability, making them ideal for exhaust, intake, and intercooler piping projects. Using pie cuts allows for tight radius turns and complex geometry that traditional bending equipment cannot achieve.

• Material: T304 Stainless Steel
• Outside Diameter: 2.25 inches
• Quantity: Set of 6 pieces
• Application: Custom exhaust and intake fabrication
• Manufacturer Part Number: 13622

Vibrant Performance T304 Stainless Steel Pie Cuts provide a professional solution for fabricating high-precision custom bends in tight-clearance exhaust or intake systems. These segments allow fabricators to create 45-degree or 90-degree elbows with a specific radius that standard mandrel-bent tubing cannot achieve.

• Material: High-quality T304 Stainless Steel for excellent corrosion resistance and weldability.
• Outside Diameter: 2.00 inches.
• Quantity: Set of 6 segments.
• Application: Ideal for custom exhaust manifolds, downpipes, and intake plumbing.
• Manufacturer Part Number: 13620

Each piece is precision-cut and deburred, ensuring a clean fit-up for TIG welding. Using pie cuts minimizes the need for specialized tube bending equipment while maintaining consistent wall thickness through the entire radius of the bend.

Vibrant Performance T304 Stainless Steel Pie Cuts are designed for professional fabricators requiring precision-engineered components for custom exhaust systems, headers, and intake piping. These 1.5-inch O.D. sections allow for the creation of tight-radius bends, including 45 and 90-degree elbows, in constrained engine bays where standard mandrel-bent tubing may not provide sufficient clearance.

Constructed from high-grade T304 stainless steel, these pie cuts offer superior corrosion resistance and long-term durability under high-heat conditions. Each piece is precision-cut and ready for TIG welding to ensure clean, professional-grade seams in any custom fabrication project.

• Material: T304 Stainless Steel
• Outer Diameter: 1.5 inches
• Quantity: Set of 6 pieces
• Application: Custom exhaust, headers, and turbo manifolds
• Manufacturer Part Number: 13615

Fabricate custom exhaust systems with precision using the Vibrant Performance 13591 Vertical Oval Pie Cut. Designed for tight-clearance applications where ground clearance or chassis constraints are a primary concern, these 304 stainless steel sections allow for a professional 45-degree bend in the vertical plane. This specific geometry is essential for building high-performance exhaust paths that maintain high flow volume while fitting into flattened, low-profile spaces.

• Material: High-quality 304 Stainless Steel for superior corrosion resistance and weldability.
• Geometry: Vertical plane oval orientation, providing a tight radius for compact routing.
• Dimensions: 4.0-inch Outer Diameter (OD) oval tubing.
• Bend Angle: Set of pie cuts to achieve a precise 45-degree elbow.
• Manufacturer Part Number: 13591

Each pie cut is precision-cut and deburred, ensuring clean fitment for TIG welding. These are ideal for custom downpipes, mid-pipes, and exhaust sections on lowered vehicles or custom chassis builds where traditional round tubing would sacrifice too much clearance.

Vibrant Performance Horizontal Oval Pie Cuts provide a precise solution for fabricators building custom exhaust systems in tight-clearance environments. These 4.0in OD sections are designed to maintain a consistent oval profile through a horizontal plane bend, making them ideal for low-profile chassis applications where ground clearance is a priority.

Each piece is manufactured from 304 stainless steel for superior corrosion resistance and weldability. This bag includes three individual pie cuts, which together allow you to fabricate a tight 45-degree elbow without the need for specialized mandrel bending equipment.

• Material: 304 Stainless Steel
• Outside Diameter: 4.0 inches (Oval)
• Total Bend Angle: 45 Degrees
• Orientation: Horizontal Plane
• Package Quantity: Bag of 3
• Manufacturer Part Number: 13590

Vibrant Performance 13581 vertical oval pie cuts provide a professional solution for fabricating custom exhaust bends in tight-clearance environments. Manufactured from high-quality 304 stainless steel, these segments allow fabricators to create a precise 45-degree tight-radius elbow while maintaining the low profile of an oval exhaust system.

• Material: 304 Stainless Steel
• Outside Diameter: 3.5 inches
• Bend Angle: 45 Degrees
• Orientation: Vertical Plane
• Manufacturer Part Number: 13581

Ideal for high-performance applications where ground clearance or chassis constraints require an oval profile, these pie cuts ensure consistent wall thickness and excellent weldability for long-lasting custom exhaust components.

Vibrant Performance Horizontal Oval Pie Cuts provide the precision needed for complex exhaust fabrication where ground clearance or chassis space is at a premium. Constructed from high-quality 304 stainless steel, this 3.5-inch OD tight 45-degree elbow allows fabricators to create custom bends without the need for a dedicated tube bender.

• Material: 304 Stainless Steel for superior corrosion resistance and weldability.
• Orientation: Horizontal plane bend, designed for maintaining low profiles in exhaust and intake systems.
• Angle: Tight 45-degree elbow configuration.
• Size: 3.5-inch Outside Diameter (OD).
• Manufacturer Part Number: 13580

Designed for professional-grade welding, these pie cuts ensure consistent wall thickness and flow characteristics throughout the bend. Whether you are building custom headers, downpipes, or a complete exhaust system, Vibrant Performance oval pie cuts simplify the process of navigating tight clearances while maximizing flow area.

Vibrant Performance 304 Stainless Steel Vertical Oval Pie Cuts provide a professional solution for fabricating custom exhaust bends in tight clearances where standard mandrel-bent tubing is impractical. These pie cuts are specifically designed for the vertical plane of 3-inch nominal oval tubing, allowing for precise control over your exhaust routing in low-profile environments.

Each piece is precision-cut to a 9-degree angle, meaning a set of five allows for the creation of a 45-degree elbow. Constructed from high-quality T304 stainless steel, these components offer excellent corrosion resistance and weldability for long-lasting performance in high-heat exhaust applications.

• Material: 304 Stainless Steel
• Tubing Shape: Oval (Vertical Plane)
• Size: 3.00" Nominal Oval
• Centerline Radius (CLR): 3.10"
• Cut Angle: 9 Degrees per piece
• Quantity: Set of 5 (Creates one 45-degree bend)
• MPN: 13576

Vibrant Performance 13575 horizontal oval pie cuts provide a professional solution for fabricating custom exhaust bends in tight-clearance environments. Manufactured from high-grade 304 stainless steel, these components allow fabricators to achieve precise angles without the need for a dedicated tube bender or complex oval-to-round transitions.

This set includes five 9-degree cuts, which together create a 45-degree horizontal bend. The oval profile is ideal for maintaining high exhaust flow while maximizing ground clearance or fitting between chassis and drivetrain components where vertical space is limited.

• Material: 304 Stainless Steel
• Tubing Style: Nominal 3 inch Oval
• Orientation: Horizontal Plane
• Centerline Radius (CLR): 3.75 inch
• Angle: 9 degrees per cut (Set of 5 creates one 45° elbow)
• Manufacturer Part Number: 13575

Vibrant Performance vertical oval pie cuts are engineered for high-precision exhaust fabrication where ground clearance or chassis constraints are a factor. These 13571 segments allow fabricators to create custom-angled elbows in the vertical plane, providing a professional solution for complex exhaust routing.

Constructed from high-quality 304 stainless steel, these pie cuts offer excellent corrosion resistance and weldability. Each segment features a 15-degree cut, allowing a set of three to form a 45-degree bend, or multiple sets to be combined for 90-degree configurations. The nominal 3-inch oval profile maintains exhaust flow while minimizing the vertical footprint of the pipe.

• Manufacturer Part Number: 13571
• Material: 304 Stainless Steel
• Orientation: Vertical Oval
• Size: 3 in. Nominal
• Centerline Radius: 2.35 in.
• Angle: 15 degrees per cut
• Quantity: Set of 3 segments

Vibrant Performance horizontal oval pie cuts are engineered for precision exhaust fabrication where space is at a premium. These segments allow fabricators to create custom-angle bends that maintain the flow characteristics of a 3-inch nominal tube while providing the low-profile advantages of an oval shape. By using 15-degree increments, you can achieve complex geometries and tight-clearance routing that standard mandrel bends cannot accommodate.

Each segment is manufactured from high-grade 304 stainless steel, providing excellent corrosion resistance and a clean surface for TIG welding. The horizontal orientation is specifically designed to maximize ground clearance on lowered vehicles or to pass through narrow chassis sections.

• Material: 304 Stainless Steel
• Nominal Size: 3.00 in. Oval
• Orientation: Horizontal Plane
• Centerline Radius (CLR): 2.95 in.
• Angle: 15° per cut
• Quantity: Set of 3 segments
• Manufacturer Part Number: 13570

Vibrant Performance T304 stainless steel brushed straight tubing is engineered for professional fabricators building high-performance exhaust systems, downpipes, and custom intake plumbing. This 5-foot section features a consistent brushed finish that provides a clean aesthetic while significantly reducing the time required for surface preparation prior to welding.

• Material: T304 Stainless Steel
• Finish: Brushed
• Outer Diameter: 4.0 inches
• Length: 5 feet (60 inches)
• Weld-ready surface for TIG or MIG applications
• Manufacturer Part Number: 13396

Vibrant Performance 13392 304 Stainless Steel Brushed Straight Tubing is engineered for professional vehicle fabricators who demand a clean, high-end finish and efficient workflow. This straight tube is constructed from premium 304 stainless steel, offering excellent corrosion resistance and long-term durability for custom exhaust systems, intake piping, and structural fabrication.

The standout feature is the factory-applied brushed finish, which provides a professional aesthetic immediately. Because the surface is already conditioned, this tubing requires virtually no preparation for welding, significantly reducing labor time in the shop. Each piece is manufactured to precise tolerances to ensure consistent fitment and reliable weld penetration.

• Manufacturer Part Number: 13392
• Material: T304 Stainless Steel
• Outer Diameter (OD): 3.00 in. (76.2mm)
• Finish: Brushed
• Construction: Straight Tubing
• Ready to weld with minimal surface preparation required

Vibrant Performance T304 stainless steel straight tubing is engineered for automotive fabricators who demand precision and a professional finish. This 2.75-inch O.D. tubing features a consistent brushed surface that not only provides a clean aesthetic but also requires virtually no preparation for welding, making it ideal for custom exhaust systems, intake piping, and coolant lines.

• Material: High-grade T304 Stainless Steel for maximum corrosion resistance and longevity.
• Finish: Factory-brushed finish for a clean look and efficient weldability.
• Dimensions: 2.75-inch (69.85mm) Outer Diameter and 5-foot (1.52m) length.
• Fabrication Ready: Designed for easy cutting and welding in custom automotive applications.
• Manufacturer Part Number: 13391