Offering easy and convenient air pressure adjustment for any brand of aftermarket air spring, the WirelessOne on-board air compressor system from Air Lift is ideal for any air spring user. With the included handheld controller and NEW wireless app, inflation and deflation has never been more simple. With air spring equipped vehicles, adjusting the air pressure has been an inconvenience -- find a gas station with an air compressor, then fiddle with Schrader valves until the pressures are equalized. Air Lift looked to eliminate that hassle with WirelessOne, making every part of the process simple and fast, starting with installation. WirelessONE is a single path system, meaning that both air springs will inflate or deflate to the same pressure. The air springs are inflated and deflated by an external air compressor with either one or two Schrader valves, attached to one or two air springs. Between the included wiring harness, installation hardware and a fully illustrated instruction manual, WirelessOne will be up and running in no time. Installing the system takes only an hour, with no air line or wiring needing to be routed through the cab of the vehicle, as well as no need to tap into the ignition wire. By eliminating this necessity, Air Lift removed the need to drill into the firewall and the need to work with live wires. When installed, the system allows you to quickly and easily adjust the air pressure in the air springs to accommodate changes in the vehicle's load. With the second generation of WirelessOne , Air Lift created a mobile app for both iOS and Android devices, on top of the included wireless controller, allowing you to connect with the Bluetooth -enabled manifold easily. As the leader in air suspension products for over 75 years, Air Lift is committed to delivering quality parts that last.

• Compact wireless handheld controller with LCD display, programmable with up to three user-defined memory settings
• Compact, weather-resistant and corrosion-proof relay integrated single path manifold
• Free iOS and Android mobile app easily connects with the Bluetooth-enabled manifold
• Manifold and controller software updates provided over the air via free mobile app
• Easy to install with fully illustrated installation manual
• Two-year limited warranty and 60-day, money-back guarantee
• Works with all brands of air springs
• Operates within 5-100 PSI
• WirelessONE

This 160 PSI air shock controller allows driver controlled air shock pressure right from the driver's seat. The kit includes a universal connector for most air shocks including factory installed, a rugged on board air compressor, and a dash mount gauge panel, hardware, and air lines. The kit comes with complete instructions for easy installation and is back by a 2 year limited warranty.

• Allows driver control for air shock pressure right from the driver seat
• Universal connector for most air shocks including factory installed
• Includes dash mount gauge panel, hardware and air line.
• Controls Your Air Shocks From The Drivers Seat
• Easy to install with fully-illustrated manual
• Convenience Adjustment From The Drivers Seat
• Includes rugged on board air compressor
• Works With Most Air Shocks

This Part Fits:

aFe CONTROL Electronic Shock Delete Modules are a simple plug and play module that eliminate the suspension control check engine light allowing installation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. When paired with the aFe CONTROL Ride Height Simulator Modules, you can confidently run lowering or lift kits without disturbing the suspension control system. Together, these modules let you upgrade your suspension without triggering error codes or limiting vehicle performance. Our aFe CONTROL Electronic Shock Delete Modules and Ride Height Simulators are both required when replacing your MagneRide electronic shock absorbers. Not using these two products together will set off the suspension control error light.

• Direct Fit Installation Requires No Modifications
• Eliminates Suspension Control Error Light
• Simple Plug and Play Installation
• GM-Style Metri-Pack Connectors
• High Temp Thermal Epoxy
• Proudly Made in the USA

This Part Fits:

aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work in tandem with our Electronic Shock Delete kit 436-401001-N. These Modules are sold as a set of four.

• Eliminates Suspension Control Error Light When Lowered/Raised more than 1”
• Direct Fit Installation Requires No Modifications
• Simple Plug-and-Play Installation
• GM Style Weatherpack Connector
• High Temp Thermal Epoxy
• Proudly Made in the USA

This Part Fits:

aFe Control's ESD (electronic shock delete) is a simple plug and play module that eliminates the suspension control check engine light allowing instillation of aftermarket shocks or coilovers on vehicles previously equipped with GM "MagneRide"electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. This ESD kit is sold in sets of four, one for each shock, and features anodized extruded aluminum heat sinks, GM style Metri-Pack connectors, and abrasion resistant braided wiring shields. Gen 2 ESD kit, characterized by large Metri-Pack connector, fits the following vehicles: 97-04 C5 Corvette, 05-13 C6 Corvette, 09-13 Cadillac CTS-V.

• Eliminates Suspension Control Check Engine Light
• Abrasion Resistant Braided Wiring Shields
• Anodized Extruded Aluminum Heat Sinks
• GM Style Metri-Pack Connectors
• Simple Plug and Play

This Part Fits:

aFe CONTROL Electronic Shock Delete Modules are a simple plug and play module that eliminate the suspension control check engine light allowing installation of aftermarket shocks or coilovers on vehicles previously equipped with GM “MagneRide” electronic shock absorbers. A body control module check engine light will limit vehicle speeds to 80mph if not bypassed. These modules are sold as a set of four.

• Eliminates Suspension Control Check Engine Light
• Simple Plug and Play Installation
• GM-Style Metri-Pack Connectors

This Part Fits: