Fits 2020-2026 Chevrolet Corvette Stingray models. This aFe Control sway bar set is engineered to transform the handling characteristics of the C8, providing the adjustability needed to fine-tune roll resistance and dial in your preferred cornering bias.

Each bar is CAD-designed and CNC-bent from lightweight 1026 DOM tubular steel to strict tolerances, ensuring a precise fit and reliable operation. Both the front and rear bars feature 3-way adjustability, allowing drivers to compensate for different track conditions or tire setups. To ensure maximum strength and accurate hole positioning, the front bar utilizes TIG-welded CNC-machined ends, while the rear features waterjet-cut plate ends. The system is finished in a durable blue powder coat and includes low-deflection 90A durometer polyurethane bushings paired with 6061-T6 billet aluminum brackets featuring integrated grease fittings for easy maintenance.

• CNC-bent 1026 DOM steel tubular construction
• 3-way adjustable front and rear bars for customized handling bias
• TIG-welded CNC-machined front ends and waterjet-cut rear plate ends
• 6061-T6 black anodized billet aluminum bushing brackets with grease fittings
• High-performance 90A durometer polyurethane bushings
• Direct-fit installation requires no vehicle modifications
• Durable blue powder-coated finish
• Manufacturer Part Number: 440-401008-L
• Made in the USA

Fits 1997-2013 Chevrolet Corvette C5 and C6 models, including Base, Z06, ZR1, Grand Sport, 427, and special editions.

Engineered specifically for the drag strip, the aFe Control PFADT Series Drag Racing Rear Sway Bar is designed to maximize launch performance and traction. By increasing the stiffness of the rear suspension and reducing independence, this bar ensures both rear tires maintain more consistent contact with the track surface during hard launches. This 3-piece system replaces the factory rear sway bar with a high-strength torsion setup built for the rigors of competitive racing.

• Precision Construction: Features a 4130 Chromoly torsion bar with splined ends, finished in clear zinc for superior corrosion resistance and long-term durability.
• Lightweight Adjustable Arms: Includes 7050-T7 aluminum arms, anodized in signature orange with laser-etched adjustment markers for three distinct sway bar rate combinations.
• Professional Tuning: Equipped with adjustable turnbuckle end links that allow for precise corner balancing without disconnecting the links from the vehicle.
• Premium Hardware: The kit includes solid 6061-T6 pillow block bushing mounts and Moly-impregnated nylon bushings for minimal deflection and maximum response.
• Installation Ready: Includes all necessary centering rings and hardware for a complete installation.

Note: This product is designed specifically for drag racing applications and is not intended for use on public roads or street driving. Manufacturer Part Number: 440-401007-N.

Fits 1997-2013 Chevrolet Corvette (C5/C6) models including Base, Grand Sport, Z06, and ZR1.

Eliminate bushing deflection and provide a rock-solid mount for your suspension with aFe Control PFADT Series Racing Sway Bar Pillow Blocks. These mounts are engineered specifically for Corvette racecars to provide maximum chassis feedback and consistent anti-roll bar performance by replacing compliant polyurethane components with a rigid mounting solution.

The pillow blocks are CNC machined from 6061-T6 aluminum and finished in PFADT signature orange anodizing for superior corrosion resistance and durability. The included nylon bushings are Molybdenum (Moly) impregnated, significantly reducing friction and wear compared to standard materials. Designed as a direct-fit upgrade, these blocks require no vehicle modifications for installation and are intended for use with PFADT Series Heavy Rate Racing Sway Bars.

• Solid Mounting: Replaces standard mounts to eliminate deflection for improved chassis control and steering response.
• Premium Materials: CNC machined 6061-T6 aluminum pillow blocks with Moly-impregnated nylon bushings for reduced friction.
• Racing Specific: Designed to offer a rigid mounting point for PFADT Series Heavy Rate Racing Sway Bars.
• Track Use Only: Engineered for maximum performance; increased road noise makes these unsuitable for street or public road use.
• Manufacturer Part Number: 440-401006-N

Fits select 1997-2016 Chevrolet Corvette (C5, C6, and C7) including Stingray, Z06, Grand Sport, and ZR1.

The aFe Control PFADT Series Heavy Duty Street End Link Set is engineered to replace flexible factory links with high-articulation components. By utilizing 0.5-inch PTFE-lined rod ends, this kit eliminates the deflection common in OE bushings, providing a more direct connection between the sway bar and the chassis for improved handling response and predictability.

• Heavy-duty 0.5-inch PTFE-lined rod ends for durable, low-friction operation
• CNC-machined articulation spacers ensure proper geometry and clearance
• Direct-fit installation requires no vehicle modifications
• Includes Grade 8 mounting hardware for superior strength
• Designed specifically for street use and occasional track days
• Manufacturer Part Number: 440-401002-A

Fits 1997-2013 Chevrolet Corvette C5 and C6 models including Base, Z06, ZR1, and Grand Sport.

Upgrade your Corvette's handling with the aFe Control Sway Bar Set. Engineered for both track performance and street drivability, this kit significantly reduces body roll for flatter, faster cornering and improved driver control. Each bar is CAD designed and CNC bent to strict tolerances to ensure a precise fit and reliable operation under high-load conditions.

The system features a 3-way adjustable rear bar, allowing you to fine-tune the roll resistance and handling bias to suit your driving style. To maintain maximum rigidity and accurate geometry, the bars utilize CNC machined ends that are TIG welded in a dedicated fixture. This kit includes low-deflection polyurethane bushings and heavy-duty adjustable end links for a complete suspension overhaul.

• Rear Sway Bar: 3-way adjustable for custom handling bias
• Construction: CNC bent steel with TIG-welded machined ends
• Bushings: Low-deflection polyurethane with waterproof grease
• Hardware: Includes heavy-duty adjustable end links
• Finish: aFe Control Signature Blue powder coat
• Manufacturer Part Number: 440-401001-L

Fits 1997-2013 Chevrolet Corvette C5 and C6 models, including Base, Z06, ZR1, Grand Sport, 427, and 50th Anniversary editions.

The aFe Control Johnny O'Connell Sway Bar set is specifically tuned by the legendary Corvette racer to deliver a complete transformation in handling performance. This set reduces body roll for flatter, faster cornering and improved car control without sacrificing ride quality. Built from high-strength 4130 Chromoly tubular steel, these bars provide increased stiffness while maintaining a lightweight design.

The rear sway bar features 3-way adjustability, allowing you to fine-tune the suspension balance to your driving style or track conditions. Finished in Johnny O'Connell's signature yellow powder coat, this kit is designed to work as a perfectly balanced system for the C5 and C6 chassis.

• Constructed from 4130 Chromoly tubular steel
• 3-way adjustable rear sway bar for precision tuning
• Includes high-durometer polyurethane bushings and heavy-duty end links
• Signature Johnny O'Connell yellow powder coat finish
• Direct-fit installation using factory mounting points
• Manufacturer Part Number: 440-401001-J

Fits select 2010-2026 Cadillac, Chevrolet, and GMC vehicles originally equipped with MagneRide suspension.

When upgrading to aftermarket shocks or coilovers, vehicles equipped with GM MagneRide electronic shock absorbers often trigger a suspension control check engine light, which can restrict vehicle speeds to 80mph. The aFe CONTROL Electronic Shock Delete Modules provide a simple plug-and-play solution to bypass these errors. Paired with Ride Height Simulator Modules, this kit allows you to install lowering or lift kits without disturbing the factory suspension control system or compromising performance.

• Eliminates suspension control error lights and the 80mph speed limiter
• Direct-fit, plug-and-play installation with no modifications required
• Uses GM-style Metri-Pack connectors for a secure, factory-grade connection
• Encapsulated in high-temp thermal epoxy for long-term durability
• Manufacturer Part Number: 436-401006-B
• Proudly Made in the USA

Fits select 1997-2015 Chevrolet Corvette and Cadillac CTS-V models.

aFe CONTROL Ride Height Simulator modules provide a clean, plug-and-play solution for vehicles equipped with factory electronic suspension that have been lowered or lifted by more than 1 inch. Ride height adjustments beyond this threshold often trigger suspension control error lights on the dashboard. These modules simulate the expected signal to the vehicle's ECU, clearing error codes without requiring modifications to the factory wiring harness.

Engineered for long-term durability, these simulators are potted in high-temperature thermal epoxy to withstand the heat and vibration of the wheel wells. They are designed to work in tandem with the aFe Electronic Shock Delete kit (MPN 436-401001-N) for a complete suspension solution.

• Eliminates suspension control error lights when vehicle is lowered or raised more than 1 inch
• Direct-fit, plug-and-play installation with no cutting or splicing required
• Equipped with OE-style GM Weatherpack connectors for a weather-tight seal
• Encapsulated in high-temp thermal epoxy for superior reliability
• Includes a complete set of four (4) modules
• Manufacturer Part Number: 436-401003-B
• Proudly Made in the USA

Fits select 2010-2026 Cadillac ATS/CTS/Escalade, Chevrolet Camaro/Corvette/Tahoe/Suburban/SS, and GMC Sierra/Yukon models.

The aFe Control Electronic Shock Delete (ESD) kit is a precision-engineered plug-and-play solution for owners upgrading from factory GM MagneRide electronic shock absorbers to aftermarket shocks or coilovers. Without this bypass, the vehicle's Body Control Module (BCM) will trigger a suspension control check engine light and actively limit vehicle speed to 80 mph. These modules terminate the circuit correctly, maintaining full vehicle functionality without error codes.

Built for the rigors of performance driving and heavy-duty use, each module is housed in an anodized extruded aluminum heat sink to manage thermal loads. The kit features genuine GM-style Metri-Pack connectors for a secure, weather-tight fit and is wrapped in abrasion-resistant braided wiring shields for maximum durability. This Gen 2 ESD kit is specifically configured with small connectors for the listed applications.

• Eliminates suspension control check engine lights and 80 mph speed limiters
• True plug-and-play installation with GM-style Metri-Pack connectors
• Anodized extruded aluminum heat sinks for superior thermal management
• Abrasion-resistant braided wiring shields protect against debris and wear
• Set of four modules (one for each corner)
• Manufacturer Part Number: 436-401002-N

Fits select 1997-2015 Chevrolet Corvette (C5/C6) and Cadillac CTS-V models equipped with factory electronic suspension. These aFe CONTROL Electronic Shock Delete Modules are a direct plug-and-play solution for owners upgrading to aftermarket coilovers or shocks.

When vehicles equipped with GM MagneRide electronic shock absorbers are fitted with non-electronic suspension, the Body Control Module (BCM) triggers a suspension check engine light and limits the vehicle's top speed to 80 mph. These modules bypass the electronic sensor signal, eliminating the dash warning and restoring the full performance envelope of your vehicle. Constructed with GM-style Metri-Pack connectors, they ensure a secure, weather-sealed connection to the factory harness.

• Eliminates suspension control check engine lights and the associated 80 mph speed governor
• Simple plug-and-play installation requires no wire cutting or splicing
• Equipped with high-quality GM-style Metri-Pack large connectors
• Designed specifically for MagneRide-equipped vehicles (F55 suspension code)
• Includes a complete set of four (4) modules
• Manufacturer Part Number: 436-401001-N

Fits 2014-2019 Chevrolet Corvette (Stingray, Z06, Grand Sport, and ZR1).

The aFe Control PFADT Series Featherlight Adjustable Coilover System provides a complete suspension solution for the C7 Corvette. By replacing the factory transverse leaf springs and OE shocks, this system converts the vehicle to a true independent suspension. This conversion eliminates the "crosstalk" and harsh ride characteristics common to the factory setup, resulting in more predictable handling and improved ride quality on both the street and track.

These coilovers are precision CNC-machined from 6061-T6 aluminum and finished with a durable hard-anodized coating. The mono-tube construction features an internal floating piston to separate oil and nitrogen gas, ensuring consistent performance under demanding conditions. With single-point damping adjustment for rebound and compression, and independent ride height adjustment, you can fine-tune your Corvette's stance and cornering dynamics with ease.

• Mono-tube construction with internal floating piston (IFP) for consistent damping
• Lightweight 6061-T6 hard-anodized aluminum bodies
• Single adjustable damping (rebound and compression) for fine-tuning
• BOA (Ball on Axis) upper mount system for quiet operation and precise movement
• Includes optimized spring rates for street and track applications
• Manufacturer Part Number: 430-401004-N

Fits 1997-2013 Chevrolet Corvette models including Base, Z06, ZR1, Grand Sport, and 427. This aFe Control PFADT Series Featherlight Adjustable Coilover System is designed as a complete suspension overhaul. By replacing the factory transverse leaf springs and OE shocks, this system provides a true independent suspension, eliminating the inherent "crosstalk" and harsh ride characteristics of the original equipment. The single-adjustable design allows for precise fine-tuning of both ride height and damping, making it ideal for Corvette owners seeking a balance between street comfort and track performance.

Each coilover is precision CNC-machined from 6061-T6 aluminum and features a hard-anodized finish for superior durability. The mono-tube construction utilizes an internal floating piston to separate the hydraulic oil from the nitrogen gas, ensuring consistent damping and predictable handling even under heavy use. The system includes a ball-on-axis upper mount system to maintain proper alignment throughout the suspension's stroke while providing quiet operation.

• Manufacturer Part Number: 430-401001-N
• Mono-tube construction with internal floating piston (IFP)
• Lightweight 6061-T6 aluminum bodies with hard-anodized finish
• Single-adjustable damping for rebound and compression tuning
• Fully adjustable ride height for custom stance
• Ball-on-axis upper mount system for quiet operation and precise control
• Optimized spring rates for dual-purpose street and track applications

Fits 2014-2019 Chevrolet Corvette C7 Stingray, Grand Sport, and Z06 models.

The aFe Control Johnny O'Connell Signature Series shock package is engineered to provide a track-tuned suspension transformation without compromising the durability of your C7. Personally tuned by legendary Corvette racer Johnny O'Connell, these shocks are matched to the specific travel and performance requirements of the Chevrolet Corvette platform. Featuring a monotube construction with an internal floating piston (IFP), these shocks prevent oil aeration to ensure consistent damping performance under aggressive driving conditions.

• Precision Engineering: Lightweight, hard-anodized 6061-T6 aluminum bodies offer superior strength and enhanced heat dissipation over factory steel units.
• Adjustable Performance: Features damping adjustment for both rebound and compression, alongside ride height adjustability for a custom-tailored stance and handling response.
• Advanced Mounting: Equipped with a ball-on-axis upper mount system to eliminate bushing deflection and improve steering precision.
• Direct Replacement: Designed to install into factory mounting points as a high-performance alternative to original equipment.
• Manufacturer Part Number: 420-401002-J

Fits select 1997-2013 Chevrolet Corvette C5 and C6 models, including Base, Z06, Grand Sport, and ZR1.

The aFe Control Johnny O'Connell Signature Series shock package is engineered to transform the handling of your C5 or C6 Corvette. These shocks are custom-tuned by 4-time Le Mans winner Johnny O'Connell to meet specific travel and durability requirements that exceed factory standards. Designed as a high-performance replacement for OE dampers, this set utilizes a mono-tube design with an internal floating piston (IFP) to provide consistent, fade-free damping during spirited driving or track sessions. The lightweight 6061-T6 aluminum bodies are hard-anodized for superior corrosion resistance and thermal management.

• Manufacturer Part Number: 420-401001-J
• Lightweight hard-anodized 6061-T6 aluminum bodies
• Mono-tube construction with Internal Floating Piston (IFP)
• Damping adjustable for both rebound and compression tuning
• Ball-on-axis upper mount system for precise articulation
• Ride height adjustable design for custom corner balancing
• Includes all necessary hardware for installation

Fits 2024-2026 Toyota Tacoma models including SR, SR5, Trailhunter, and TRD Series.

The aFe CONTROL Leveling Kit is engineered to eliminate the factory "nose-down rake" on the Toyota Tacoma, providing a 1.5-inch front lift for a more aggressive stance and improved off-road ground clearance. These spacers are CNC-machined from 6061 billet aluminum for maximum strength and finished in a durable red anodized coating to resist corrosion in harsh environments.

This kit is designed for a straightforward installation that does not require the disassembly of the factory strut or spring. High-strength hardware is included to ensure a secure fit to factory mounting points. Note that minor trimming of the factory upper strut studs is required for installation, and a vehicle alignment is mandatory following the install to maintain proper suspension geometry.

• Provides 1.5 inches of front lift to level the vehicle profile
• CNC-machined 6061 billet aluminum construction
• Red anodized finish for durability and aesthetics
• Includes high-strength installation hardware
• Bolt-on design—no strut disassembly required
• Manufacturer Part Number: 416-72T010-R

Vehicle Fitment

Fits 2022-2024 Toyota Tundra TRD Pro and 2023-2024 Toyota Sequoia TRD Pro (V6-3.4L).

This aFe CONTROL leveling kit provides a 2.5-inch front lift and a 1-inch rear lift, specifically engineered to eliminate the factory nose-down rake and improve off-road ground clearance. CNC-machined from 6061-T6 billet aluminum for high strength and precision, these spacers are finished in a durable red anodized coating for corrosion resistance.

The kit features a modular design using both shim and pre-load spring spacers. This combination allows for maximum lift height without overextending the factory shock's travel, maintaining ride quality and suspension geometry. Installation is a direct bolt-on process; however, it requires disassembly of the factory struts and the use of a spring compressor to install the pre-load spacers.

• 2.5-inch front and 1-inch rear lift height
• CNC-machined 6061 billet aluminum construction
• Durable red anodized finish
• Increases ground clearance for larger wheel/tire combinations
• Modular shim and pre-load spacer design
• Manufacturer Part Number: 416-72T009-R
• Does not fit vehicles equipped with the AVS (Adaptive Variable Suspension) option

Fits 2022-2024 Toyota Tundra models (V6-3.5L) equipped with factory self-leveling rear air suspension.

The aFe CONTROL Rear Leveling Kit is engineered to provide a 1.625-inch lift for Toyota Tundra models equipped with factory air suspension. On trucks with self-leveling systems, the rear is often lowered compared to coil spring models; these brackets replace the factory level sensor brackets, tricking the system into raising the rear to the correct height. This results in improved ground clearance and a more aggressive stance, especially when paired with a front leveling kit like aFe PN: 416-72T005-R.

Constructed from laser-cut 304 stainless steel, these brackets are built to withstand off-road environments and resist corrosion. The installation is a straightforward bolt-on process that requires no modifications to the vehicle and no disassembly of the air suspension system, making it an ideal upgrade for DIY enthusiasts with basic tools.

• Provides a 1.625-inch rear lift for improved off-road performance
• Designed specifically for models with self-leveling rear air suspension
• Manufactured from durable, laser-cut 304 stainless steel
• Simple bolt-on installation with no vehicle modifications required
• Manufacturer Part Number: 416-72T006-A

Fits 2022-2024 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone).

The aFe CONTROL leveling kit provides a 1.875-inch front lift to eliminate the factory nose-down rake and improve the stance of your truck. Engineered for durability and precision, these spacers are CNC-machined from 6061 billet aluminum and finished with a red anodizing for superior corrosion resistance. This kit increases front ground clearance, allowing for larger wheel and tire combinations without compromising ride quality.

Installation is designed for efficiency; these spacers bolt directly onto the factory mounting points and do not require the disassembly of the strut and spring. The kit includes high-strength hardware to ensure a secure fit and long-term reliability under off-road conditions.

• Manufacturer Part Number: 416-72T005-R
• Lift Height: 1.875 inches
• Material: CNC-Machined 6061 Billet Aluminum
• Finish: Red Anodized
• Installation: Easy bolt-on design requiring no modifications or strut disassembly
• Includes: High-strength mounting hardware

Fits 2007-2021 Toyota Tundra models, including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The aFe CONTROL leveling kit is engineered to eliminate the factory "nose-down rake" on your truck, providing a more aggressive stance and improved off-road performance. These spacers provide a 2.5-inch front lift, increasing ground clearance for larger wheel and tire combinations without compromising ride quality.

Constructed from CNC-machined 6061 billet aluminum, these spacers are finished in a durable red anodized coating for long-lasting corrosion resistance. The kit includes high-strength hardware to ensure a secure, reliable installation. Designed as a direct bolt-on solution, this kit requires no vehicle modifications and, importantly, does not require the disassembly of the factory strut and spring assembly, making it an accessible project for home mechanics.

• Provides 2.5-inches of front lift to level the vehicle
• CNC-machined from 6061 billet aluminum
• Durable red anodized finish
• Increases front ground clearance for off-road use
• Easy bolt-in installation with no strut disassembly required
• Includes high-strength mounting hardware
• Manufacturer Part Number: 416-72T002-R

Fits select 2003-2023 Toyota 4Runner, FJ Cruiser, and Tacoma (6-Lug Models).

The aFe CONTROL 2.0-inch leveling kit provides a front-end lift to eliminate the factory "nose-down rake" and increase ground clearance for better off-road performance. These spacers are CNC machined from 6061 billet aluminum for precise fitment and lasting durability, featuring a red anodized finish for corrosion resistance.

Designed for a straightforward bolt-in installation, this kit requires no modifications to the vehicle and, unlike many other lift solutions, does not require the disassembly of the factory strut and spring assembly. High-strength hardware is included to ensure a secure mounting to the vehicle's factory points.

• Provides 2.0 inches of front lift
• CNC machined from high-grade 6061 billet aluminum
• Durable red anodized finish
• Maintains factory ride quality without strut disassembly
• High-strength mounting hardware included
• Manufacturer Part Number: 416-72T001-R

Fits 2023-2024 Chevrolet Colorado ZR2 and GMC Canyon AT4X (L4-2.7L).

Level your truck's stance and improve off-road capability with the aFe CONTROL 1.25-inch leveling kit. This kit is engineered to eliminate the factory nose-down rake common on stock ZR2 and AT4X models, providing a more aggressive profile and increased front ground clearance for larger tires or rougher terrain. Each spacer is CNC machined from 6061 billet aluminum for precise fitment and finished in a durable red anodizing for corrosion resistance.

Designed for a straightforward installation, these spacers bolt directly to the factory mounting points. The installation process is simplified as it does not require the disassembly of the strut or spring assembly, allowing for a quicker setup with standard tools. High-strength hardware is included to ensure long-term durability under demanding conditions.

• 1.25-inch front lift height
• CNC machined from 6061 billet aluminum
• Durable red anodized finish
• Increases front ground clearance and levels vehicle stance
• Easy bolt-on installation with no strut disassembly required
• Includes high-strength mounting hardware
• Manufacturer Part Number: 416-40T002-R

Fits select 2004-2024 Ford F-150 (XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, and Tremor).

Achieve a level stance and improved off-road clearance with the aFe CONTROL 2.0-inch leveling kit. This kit is engineered to eliminate the factory "nose-down rake" common on stock Ford trucks, providing a more aggressive profile and the necessary clearance for larger wheel and tire packages. Each spacer is CNC-machined from high-grade 6061 billet aluminum for precise fitment and lasting durability, then finished in a red anodized coating for superior corrosion resistance.

Designed for the DIY enthusiast and professional alike, these spacers bolt directly to the factory mounting points without requiring the dangerous and time-consuming disassembly of the strut or spring. This kit includes all necessary high-strength hardware to ensure a secure, reliable installation that maintains factory ride quality while enhancing vehicle capability.

• Provides a 2.0-inch front lift to level the vehicle
• CNC-machined from premium 6061 billet aluminum
• Durable red anodized finish for protection and style
• Simple bolt-on installation—no strut disassembly or spring compressor required
• Increases ground clearance for off-road obstacles
• Includes high-strength mounting hardware
• Manufacturer Part Number: 416-30T001-R

Fits 2021-2024 Ram 1500 TRX and TRX Launch Edition.

The aFe CONTROL 3.0-inch front leveling kit is engineered to eliminate the factory nose-down rake, providing a level stance and increased ground clearance for larger tire fitment. This kit allows for improved off-road performance and better approach angles without compromising the sophisticated electronic systems of the TRX platform.

Constructed from CNC-machined 6061 billet aluminum, these spacers feature a durable red anodized finish. To maintain the integrity of your suspension geometry, the kit includes new connecting rods that reposition the front ride height sensors, ensuring all factory driving modes remain fully functional. Additionally, polyurethane spring isolators are provided to correct spring bowing by allowing the OE shock top plates to be properly indexed during installation.

• Provides 3.0 inches of front lift for increased ground clearance
• CNC-machined 6061 billet aluminum construction with red anodized finish
• Includes new ride height sensor connecting rods to maintain all factory drive modes
• Polyurethane spring isolators prevent spring bowing
• High-strength hardware included for a secure, bolt-on installation
• Designed for use with factory struts; no spring compressor required for assembly
• Manufacturer Part Number: 416-20T002-R

Fits select 2006-2024 Dodge Ram 1500 and Ram 1500/1500 Classic models.

The aFe CONTROL 2.0-inch front leveling kit is engineered to eliminate the factory "nose-down" rake common on stock pickups, providing a perfectly level stance and increased ground clearance for larger wheel and tire combinations. These spacers are CNC-machined from premium 6061-T6 billet aluminum for exceptional strength and precision, finished with a vibrant red anodized coating for long-term corrosion resistance and a custom look.

Designed for a straightforward installation, this kit features a 100% bolt-on design that requires no permanent modifications to your truck. Crucially, the spacers are designed to install without requiring the disassembly of the factory strut and spring, significantly reducing shop time or DIY effort. High-strength mounting hardware is included to ensure a secure, reliable fitment under all driving conditions.

• Manufacturer Part Number: 416-20T001-R
• Lift Height: 2.0-Inches (Front)
• Material: CNC Machined 6061 Billet Aluminum
• Finish: Red Anodized
• Installation: Easy bolt-on; no strut disassembly required
• Performance: Increases ground clearance while maintaining factory ride quality

Fits 2010-2015 Chevrolet Camaro LS, LT, SS, Z/28, and ZL1 models (V6-3.6L / V8-6.2L / V8-7.0L).

Improve your Camaro's handling and stance with the aFe Control PFADT Series lowering springs. These springs are engineered to lower the vehicle's center of gravity by 1 to 1-1/4 inches, providing a more aggressive look while reducing body roll and improving turn-in response. Designed to work seamlessly with factory dampers, these springs feature optimized rates for both V6 and V8 applications to maintain ride quality without compromising performance.

Constructed for longevity and precision, each spring is finished in a durable gloss silver powder coating for maximum corrosion resistance. This direct-fit upgrade requires no vehicle modifications and is an ideal solution for enthusiasts looking to balance track-inspired performance with street drivability.

• Part Number: 410-402001-V
• Drop Height: 1" to 1.25" relative to factory height
• Front Spring Rate: 225 lbs/in
• Rear Spring Rate: 425 lbs/in
• Finish: Gloss Silver Powder-Coat
• Engineered to optimize factory shock absorber damping

Fits 2005-2019 Chevrolet Corvette C6 and C7 (including Base, Stingray, Z06, ZR1, Grand Sport, and 427 models).

The aFe Control PFADT Series Lowering Kit is engineered to lower your Chevrolet Corvette up to 1.25 inches, enhancing body lines and lowering the center of gravity without sacrificing ride quality. Designed to work seamlessly with the factory transverse leaf springs, this kit replaces the standard height adjusters with high-performance components built for durability and precision.

Unlike factory bolts that use simple pads, the PFADT Series adjusters feature CNC-machined stainless steel studs with integrated wrench flats for easy adjustment. Each stud is mated to an articulating ball foot equipped with a nylon pad, ensuring smooth suspension movement, perfect alignment, and quiet, corrosion-resistant operation. This direct-fit kit (MPN 410-401001-A) installs with no modifications required and is compatible with factory shock absorbers.

• Provides up to a 1.25-inch drop for improved aesthetics and handling
• CNC-machined stainless steel adjuster studs with wrench flats
• Articulating ball studs maintain perfect alignment during suspension travel
• Nylon foot pads ensure quiet operation and smooth articulation
• Direct-fit installation; no vehicle modifications necessary
• Includes four (4) lowering bolts

Fits 2010-2014 Ford F-150 SVT Raptor.

The aFe Control Sway-A-Way 2.5" Rear Shock Kit delivers race-proven damping technology to the 2010-2014 Ford F-150 SVT Raptor. These high-performance replacement absorbers are engineered to bolt directly into the factory mounting points without modification, providing a significant upgrade in off-road damping control while maintaining a smooth, predictable ride for daily driving. Built in Corona, California, these shocks utilize piggyback reservoirs for increased oil capacity and improved cooling during aggressive cycles.

Constructed with bright zinc-plated steel cylinder bodies and CNC-machined aluminum components, these shocks are built for longevity and are 100% rebuildable using simple tools. The polished nitro steel shafts and Teflon-lined steel spherical bearings ensure low-friction movement and durability in harsh environments.

• Part Number: 302-0056-05
• 2.5" diameter zinc-plated steel cylinder bodies
• Piggyback reservoirs for superior heat dissipation
• Polished nitro steel shafts for maximum strength
• Internal Floating Piston (IFP) for consistent performance
• Filled with high-grade full synthetic shock oil
• Multi-seal carrier design to prevent leakage
• Direct-fit installation with no vehicle modifications required
• Fully rebuildable and tunable components

Fits 2010-2014 Ford F-150 SVT Raptor.

aFe Control Sway-A-Way High Performance replacement coilovers bring race-winning engineering to your daily-driven 2010-2014 Ford F-150 SVT Raptor. These 2.5" diameter coilovers are a direct-fit replacement, designed to bolt into factory mounting points while providing superior off-road damping through remote reservoirs. The increased oil capacity ensures consistent performance during aggressive driving without sacrificing on-road comfort. Each kit is 100% designed and built in the USA at the aFe facility in Corona, California.

These coilovers feature bright zinc-plated steel cylinder bodies and CNC-machined aluminum components for maximum durability. The assemblies come preset for 2"-2.5" of lift, and an included spanner wrench allows for fine-tuning your ride height. Utilizing internal floating pistons (IFP) and full synthetic shock oil, these units are fully rebuildable and engineered for longevity in harsh environments.

• 2.5" diameter bright zinc-plated steel cylinder bodies
• Remote reservoirs with dedicated mounting brackets
• Polished nitro steel shafts for enhanced strength and seal durability
• Teflon-lined steel spherical bearings for precise articulation
• Multi-seal carrier system to ensure zero leakage
• Internal Floating Piston (IFP) technology
• Full synthetic shock oil for consistent thermal performance
• Adjustable 2"-2.5" lift height (spanner wrench included)
• Manufacturer Part Number: 301-5600-10