Fits select 1992-2001 Acura Integra, Honda Civic, and Honda Civic del Sol models with a 21mm front sway bar.

Improve your suspension performance by replacing soft, compliant factory rubber with Prothane high-performance polyurethane front sway bar bushings. This 21mm kit (8-1101-BL) is designed to minimize suspension deflection and reduce body roll, resulting in more predictable cornering and crisper steering response. Unlike OEM rubber which degrades over time when exposed to road contaminants and climate stress, Prothane's polyurethane formulation resists oil, grease, and atmospheric conditions for lasting service life.

• Manufacturer Part Number: 8-1101-BL
• Bore Diameter: 21mm
• Material: Performance Polyurethane
• Finish: Black
• Fitment Position: Front

Fits 2007-2014 Chevrolet Silverado models equipped with a 36mm front sway bar.

Upgrade your suspension performance with the Prothane 7-1193-BL polyurethane front sway bar bushing kit. Factory rubber bushings are prone to drying out, cracking, and compressing over time, which leads to excessive body roll and vague steering feedback. These high-density polyurethane replacements provide a more rigid connection between the sway bar and the chassis, improving cornering stability and overall handling precision.

Molded to exact tolerances for a 36mm bar diameter, these bushings are resistant to oil, grease, and road contaminants that typically degrade original equipment components. This kit is a direct-fit solution designed to restore and enhance the front-end geometry of your truck.

• Manufacturer Part Number: 7-1193-BL
• Material: High-Performance Polyurethane
• Bore Diameter: 36mm
• Position: Front Sway Bar
• Color: Black

Fits 2007-2014 Chevrolet Silverado models equipped with a 36mm front sway bar.

Upgrade your truck's handling and steering response with Prothane polyurethane front sway bar bushings. Factory rubber bushings are prone to drying out, cracking, and excessive deflection, which leads to body roll and a vague steering feel. These high-performance red polyurethane replacements provide a more stable, rigid pivot point for the sway bar, allowing the suspension system to work more efficiently.

Unlike original equipment rubber, Prothane's polyurethane formula is engineered to withstand the harsh conditions of the undercar environment. It is resistant to road salt, oils, grease, and environmental contaminants, ensuring long-lasting performance and consistent alignment geometry.

• Manufacturer Part Number: 7-1193
• Material: High-performance polyurethane
• Bushing Diameter: 36mm
• Color: Red
• Direct replacement for soft OE rubber bushings

Fits 1997-2004 Chevrolet Corvette models including Base, 50th Anniversary Edition, and Pace Car editions.

Restore suspension precision and sharpen handling with Prothane polyurethane rear sway bar bushings. Factory rubber bushings are prone to softening and cracking over time, which leads to excessive sway bar play and increased body roll. These 26mm replacements are engineered from high-grade polyurethane to resist road contaminants and extreme weather, maintaining their shape and stiffness for more consistent cornering performance.

• Designed specifically for models equipped with a 26mm diameter rear sway bar
• Polyurethane construction offers superior durability and deflection resistance compared to OE rubber
• Reduces body roll and improves chassis feedback during spirited driving
• Resistant to oils, grease, and road salt
• Includes two red bushings (Manufacturer Part Number: 7-1180)

Fits 1997-2006 Chevrolet Corvette.

Enhance your chassis stability and cornering precision with Prothane polyurethane rear sway bar bushings. This 27mm set is engineered to replace the factory rubber bushings which are prone to cracking, rotting, and excessive deflection over time. By providing a firmer mounting point for the rear sway bar, these bushings ensure more immediate bar engagement and reduced body roll during weight transfer.

• Manufacturer Part Number: 7-1179
• Sway Bar Diameter: 27mm
• Material: High-grade red polyurethane
• Resistant to automotive oils, road salt, and ozone
• Direct-fit replacement for OE bushings
• Maintains alignment and improves steering feedback

Fits 1997-2004 Chevrolet Corvette Base, 50th Anniversary Edition, and Pace Car models.

Replace compliant factory rubber with these Prothane high-performance polyurethane front sway bar bushings to sharpen your Corvette's handling. Unlike OE rubber that degrades over time and allows the sway bar to deflect under load, these 30mm polyurethane bushings provide a firm, stable pivot point. This upgrade directly reduces body roll and improves steering response by ensuring the sway bar engages immediately during cornering.

• Bore Diameter: 30mm
• Material: Premium Red Polyurethane
• Location: Front Sway Bar
• Reduces suspension deflection and improves chassis feedback
• Resistant to automotive fluids, road salt, and oils
• Manufacturer Part Number: 7-1176

Fits select 2000-2005 Chevrolet Suburban 1500/2500, Tahoe, GMC Yukon, and Yukon XL 1500/2500.

Enhance your vehicle's stability and cornering performance with Prothane rear sway bar bushings. These 1.1-inch bushings are engineered to replace soft, original equipment rubber that degrades under stress, heat, and road contaminants. By providing a firmer mounting point for the rear sway bar, they help maintain better suspension geometry and reduce body roll for a more controlled driving experience.

• Designed for 1.1-inch (1.1in) diameter sway bars
• Reduces suspension deflection and excessive body roll
• Red performance finish for high visibility and durability
• Direct replacement for factory rubber components
• Precision molded to ensure an exact fit
• Manufacturer Part Number: 7-1171

Fits select 1999-2006 Chevrolet and GMC trucks and SUVs, including Silverado and Sierra 1500, 2500, 3500, Suburban, Tahoe, and Yukon models.

Restore front-end stability and improve steering response with Prothane front sway bar bushings. Factory rubber bushings are prone to softening and cracking, which leads to excessive body roll and a vague feel during cornering. These high-density polyurethane replacements are engineered to maintain their shape under load, keeping the sway bar securely positioned to maximize its effectiveness.

• Designed specifically for sway bars with a 1.42-inch diameter
• Precision-molded from high-performance polyurethane for increased durability
• Resistant to oils, road salt, and environmental degradation that destroys rubber
• Helps eliminate suspension noise and reduces body roll during towing or hauling
• Color: Black
• Manufacturer Part Number: 7-1168-BL

Fits select 1999-2006 Chevrolet Silverado, Suburban, Tahoe, and C/K Series, plus GMC Sierra, Yukon, and Yukon XL models.

Restore precision to your front suspension with Prothane high-performance polyurethane sway bar bushings. Factory rubber bushings are prone to softening and cracking over time, leading to excessive body roll and vague steering response. These red polyurethane replacements are engineered to maintain their shape under heavy cornering loads, ensuring your sway bar performs as intended for flatter cornering and improved stability.

• Replaces worn or deteriorated OE rubber bushings for sharper handling
• Molded from durable polyurethane to resist oil, road salt, and ozone
• Designed for 1.42-inch (approx. 36mm) diameter front sway bars
• Maintains alignment and reduces suspension deflection
• Includes two (2) red front sway bar bushings
• Manufacturer Part Number: 7-1168

Fits select 1981-1991 Chevrolet and GMC Blazer, Jimmy, S10/S15, K-Series trucks, and Suburban (4WD models).

Restore the handling and steering response of your GM truck or SUV with Prothane polyurethane front sway bar bushings. Unlike factory rubber bushings that degrade over time from oil, heat, and road salt, these polyurethane replacements are engineered to maintain their shape and stiffness. This eliminates the excess play in the sway bar, ensuring your suspension reacts immediately to cornering loads for a more controlled and predictable driving experience.

This kit is designed for vehicles equipped with a 1-1/4 inch (32mm) front sway bar. The precision-molded design ensures a snug fit around the bar, while the durable black finish provides a clean, understated look under the chassis. As a direct-fit replacement for worn OE components, these bushings provide long-term reliability and are resistant to environmental contaminants that cause rubber to rot.

• Manufacturer Part Number: 7-1107-BL
• Inside Diameter: 1.25 in (32mm)
• Material: High-grade polyurethane
• Finish: Black
• Durable replacement for soft or rotted factory rubber bushings
• Engineered for 4WD applications

Fits select 1981-1991 Chevrolet and GMC 4WD vehicles, including Blazer, Jimmy, Suburban, and K-Series/V-Series pickups (1.25-inch bar).

Replace worn-out, compliant factory rubber with Prothane 7-1107 polyurethane front sway bar bushings. These 1 1/4-inch bushings are engineered to provide a firm, precise mounting point for the sway bar, significantly reducing body roll and improving steering response during cornering or off-road articulation. Unlike original equipment (OE) rubber that eventually cracks and softens, Prothane's premium polyurethane construction is impervious to engine oil, grease, and road salt.

Designed as a direct-fit upgrade, these bushings help restore handling characteristics to your GM truck or SUV, ensuring your suspension geometry remains consistent under load. The kit is specifically sized for front sway bars with a 1.25-inch diameter.

• Manufacturer Part Number: 7-1107
• Bar Diameter: 1 1/4 inch (1.25")
• Color: Red
• Material: High-Durometer Polyurethane
• Resistance: Resistant to oil, grease, ozone, and environmental debris
• Fitment Type: Direct Replacement

Fits 1999 Ford F-250 Super Duty 4WD (Lariat / XL / XLT).

Replace your vehicle's soft, degraded factory rubber bushings with Prothane polyurethane front sway bar bushings to restore steering precision and reduce body roll. These high-performance bushings are designed to maintain alignment under load, providing more consistent handling than OEM rubber. The polyurethane material is formulated to resist oil, grease, and road contaminants that typically cause rubber components to rot and fail over time.

• Specifically sized for 32mm diameter front sway bars
• Durable polyurethane construction for long-lasting performance
• Precision fit for factory mounting points on 4WD models
• Red finish for a custom look underneath the chassis
• Manufacturer Part Number: 6-1167

Fits 2005-2006 Ford Mustang Base and GT models.

Replace worn, soft factory rubber with Prothane polyurethane front sway bar bushings to restore steering response and minimize body roll. Unlike OEM rubber that deflects under load and degrades when exposed to oils and road grime, these high-durometer polyurethane bushings maintain their shape and provide more consistent stabilizer bar performance. These are designed specifically for 34mm diameter front sway bars, ensuring a precision fit that eliminates unwanted movement and suspension slop.

• Part Number: 6-1161-BL
• Material: Durable Black Polyurethane
• Bore Diameter: 34mm
• Location: Front Sway Bar
• Compatibility: Replaces factory rubber bushings on select 2005-2006 Ford Mustang models

Fits 2005-2006 Ford Mustang Base and GT models equipped with a 34mm front sway bar.

Upgrade your Mustang's handling and steering response with Prothane high-performance polyurethane front sway bar bushings. Factory rubber bushings are prone to deflection and degradation, which leads to sloppy suspension feel and increased body roll. These red polyurethane bushings provide a much firmer pivot point for the sway bar, ensuring immediate engagement during cornering and a more connected feel to the road.

• Bore Diameter: 34mm
• Material: High-durometer polyurethane
• Color: Red
• Resistant to road salt, oil, and automotive chemicals
• Replaces worn factory rubber bushings
• Manufacturer Part Number: 6-1161

Fits 2002-2004 Ford Explorer and Explorer Sport Trac (2WD/4WD).

Upgrade your vehicle's handling and stability by replacing soft, degraded factory rubber with Prothane precision-molded polyurethane rear sway bar bushings. These 21mm bushings are designed to eliminate the slop in your suspension, providing a firm, stable connection between the sway bar and the chassis to reduce body roll and improve cornering predictability.

Unlike standard rubber components, Prothane's high-performance polyurethane is engineered to resist oil, road salt, and environmental contaminants that cause factory bushings to crack and fail. This kit ensures your suspension geometry remains consistent under load for more precise control and longer service life.

• Manufacturer Part Number: 6-1160-BL
• Inner Diameter: 21mm
• Material: High-performance black polyurethane
• Placement: Rear Sway Bar
• Finish: Black
• Resistant to oils, grease, and atmospheric conditions

Fits 1979-2004 Ford Mustang and 1984 Mercury Capri models.

Replace compliant, worn-out rubber factory units with Prothane 27mm polyurethane front sway bar bushings. These high-durometer bushings are designed to significantly reduce sway bar deflection during cornering, helping to maintain a flatter vehicle attitude and sharper steering response. Unlike OEM rubber that degrades when exposed to oils and road contaminants, Prothane's polyurethane formula is engineered for long-term durability and consistent performance.

• Precision-molded 27mm inner diameter to fit factory-sized stabilizer bars
• High-durometer polyurethane construction minimizes compression and deflection
• Resistant to automotive fluids, road salt, and environmental wear
• Black finish for a subtle, professional appearance
• Direct-fit replacement for factory mounting locations
• Manufacturer Part Number: 6-1135-BL

Fits 1997-2003 Ford F-150 and 1997-1999 Ford F-250 models with a 30mm front stabilizer bar.

Upgrade your truck's handling and suspension geometry with Prothane polyurethane front sway bar bushings. Factory rubber bushings are prone to drying out, cracking, and distorting under load, which leads to sloppy steering and increased body roll. These high-performance polyurethane replacements provide a precise fit that maintains its shape, ensuring your sway bar performs as intended for flatter cornering and improved steering response.

Prothane's proprietary polyurethane formula is resistant to oil, road salt, and environmental contaminants that typically destroy OE rubber components. This kit is specifically designed for Ford trucks equipped with a 30mm diameter sway bar and finished in black for a clean, factory look.

• Manufacturer Part Number: 6-1130-BL
• Bushing Internal Diameter: 30mm
• Material: Premium Polyurethane
• Finish: Black
• Increases steering precision and reduces body roll
• Direct replacement for worn factory bushings

Fits 1979-2004 Ford Mustang, 1980-1988 Ford Thunderbird, and 1979-1986 Mercury Capri models with a 1 5/16-inch front sway bar.

Over time, factory rubber bushings become soft, crack, and dry rot, leading to sloppy steering response and increased body roll. These Prothane polyurethane front sway bar bushings provide a significant handling upgrade by maintaining proper sway bar alignment and tension. Unlike rubber, polyurethane is resistant to road grime, oil, and ozone, ensuring consistent performance for the life of your vehicle.

• Replaces worn or distorted factory rubber bushings for improved steering precision
• Constructed from high-grade polyurethane for superior durability and deflection resistance
• Specifically sized for 1 5/16-inch (1.3125") diameter front sway bars
• Black finish for a subtle, OE-plus appearance
• Manufacturer Part Number: 6-1126-BL

Fits select 1970-1998 Ford Bronco, Bronco II, F-100, F-150, F-250, F-350, and Ranger.

Restore the handling and chassis stability of your Ford truck or SUV with this Prothane sway bar and end link bushing set. Over time, original equipment rubber bushings degrade from oil, road salt, and ozone, leading to excessive body roll and a mushy steering feel. These precision-molded polyurethane replacements provide a firmer mounting point, ensuring your sway bar performs as intended during cornering and load changes.

Specifically engineered for vehicles with 2-inch frames and eye-to-eye end link configurations, these bushings offer significantly longer service life than rubber while maintaining correct alignment under high stress. The black finish provides a clean, factory look while the material resists the compression and cracking that plagues OE components.

• Bore Diameter: 1 1/8 inch (1.125")
• Application: Designed for 2-inch frames
• Link Style: Eye-to-eye end links
• Material: Performance polyurethane
• Color: Black
• Manufacturer Part Number: 6-1118-BL

Fits select 1970-1998 Ford Bronco, Bronco II, F-100, F-150, F-250, F-350, and Ranger.

Replace worn, soft factory rubber with this Prothane polyurethane sway bar and end link bushing set to restore steering precision and reduce body roll. High-performance polyurethane is significantly more durable than original equipment rubber, resisting degradation from road salt, oils, and automotive fluids. These bushings minimize suspension deflection, ensuring your sway bar remains effective during cornering and heavy loading.

• Bore Diameter: 1-inch
• Compatible Frame Size: 2-inch
• End Link Style: Eye-to-Eye
• Material: High-Durometer Polyurethane
• Color: Red
• Manufacturer Part Number: 6-1117

Fits select 1975-1998 Ford Bronco, Bronco II, Ranger, and F-Series (F-100, F-150, F-250, F-350) trucks. This Prothane polyurethane bushing kit is designed to replace soft, worn-out OEM rubber bushings to restore handling precision and reduce body roll.

These high-performance bushings are engineered for 7/8-inch sway bars and specifically fit 2.5-inch frames using a stud-to-eye end link configuration. Unlike factory rubber that degrades over time when exposed to road grime and oils, Prothane's specialized polyurethane formula maintains its shape and durometer for long-lasting suspension stability.

• Manufacturer Part Number: 6-1101
• Material: Premium Red Polyurethane
• Bore Diameter: 7/8 inch
• Compatibility: Designed for 2.5-inch frames
• End Link Style: Stud to Eye
• Includes: Sway bar bushings and end link bushings

Fits select 1994-2005 Dodge Ram 1500, 2500, and 3500 2WD/4WD trucks.

These Prothane front sway bar bushings are engineered as a high-durability replacement for factory rubber components. Polyurethane is significantly more resistant than rubber to road contaminants, oil, and environmental ozone, ensuring the sway bar remains securely anchored for a longer service life. Installing these 34mm bushings helps minimize body roll and restores steering response by eliminating the deflection common in worn OE bushings.

• Bore Diameter: 34mm
• Material: High-grade black polyurethane
• Location: Front Sway Bar
• Resistant to oils, road salt, and environmental wear
• Manufacturer Part Number: 4-1138-BL

Fits 1994-2005 Dodge Ram 1500, 2500, and 3500 (2WD/4WD) models equipped with a 34mm stabilizer bar.

Restore steering response and reduce body roll with Prothane polyurethane front sway bar bushings. Over time, original equipment rubber bushings soften, crack, and distort, leading to vague handling and clunking during suspension travel. These high-durometer polyurethane replacements offer superior resistance to road salt, oil, and ozone, maintaining their shape and performance far longer than factory rubber.

By providing a more rigid mounting point for the front sway bar, these bushings ensure that stabilizer bar energy is transferred immediately to the chassis rather than being absorbed by compressed rubber. This is an essential upgrade for Dodge Ram owners looking to maintain better control under heavy loads or during cornering.

• Part Type: Front Sway Bar Bushings
• Bushing Diameter: 34mm
• Material: High-Performance Polyurethane
• Finish: Red
• Fitment: 2WD and 4WD Chassis
• Manufacturer Part Number: 4-1138

Fits select 2000-2001 Dodge Dakota and Durango models.

Replace soft, deteriorated factory rubber with high-performance Prothane polyurethane front sway bar bushings. Engineered specifically for a 35mm bar diameter, these red bushings (MPN: 4-1135) provide a much firmer connection between the sway bar and the chassis than OE rubber. This upgrade effectively reduces bushing deflection and body roll, delivering more predictable handling and improved steering response during cornering or heavy towing.

• Precision-molded for 35mm diameter front sway bars
• Premium red polyurethane construction resists road salt, oil, and ozone degradation
• Maintains suspension alignment for more consistent handling
• Direct replacement for worn-out or soft factory bushings
• Manufacturer Part Number: 4-1135

Fits 1994-2001 Dodge Ram 1500, 2500, and 3500 2WD/4WD models equipped with a 32mm front sway bar.

Upgrade your truck's steering response and suspension stability with Prothane polyurethane front sway bar bushings. These high-performance bushings replace the soft, compliant factory rubber that often degrades over time due to road grime, heat, and oil exposure. By utilizing a firm, precision-molded polyurethane, these bushings maintain better sway bar alignment and reduce body roll during cornering or heavy hauling.

• Manufacturer Part Number: 4-1103
• Material: High-Durometer Polyurethane
• Color: Red
• Bore Diameter: 32mm
• Position: Front Sway Bar
• Fits both 2WD and 4WD configurations

Fits select 1994-2001 Dodge Ram 1500, 2500, 3500, Dakota, and Durango.

Restore handling precision and eliminate front-end play with Prothane high-performance polyurethane sway bar bushings. Designed as a direct replacement for vehicles equipped with 30mm front sway bars, these bushings provide a firmer, more stable mounting point than soft factory rubber components. By minimizing deflection, these bushings help maintain proper sway bar geometry to reduce body roll during cornering. Unlike OE rubber, Prothane's polyurethane formula is resistant to road grime, oils, and environmental degradation for a significantly longer service life.

• Manufacturer Part Number: 4-1102-BL
• Bore Diameter: 30mm
• Material: Precision-molded high-durometer polyurethane
• Color: Black
• Enhances steering response and chassis stability
• Direct fit for 2WD and 4WD models as specified

Fits select 1994-2001 Dodge Ram 1500/2500/3500, Dakota, and Durango models.

Replace your vehicle's soft, failing OE rubber bushings with Prothane's high-performance polyurethane front sway bar bushings. These 30mm bushings are designed to provide superior support to the sway bar, significantly reducing body roll and improving steering response during cornering. Unlike factory rubber that degrades when exposed to road salt, oil, and ozone, Prothane’s polyurethane formula is engineered for long-term durability and consistent performance under heavy load.

• Bore Diameter: 30mm
• Material: Premium Red Polyurethane
• Manufacturer Part Number: 4-1102
• Installation: Replaces factory bushings in the original mounting brackets
• Enhanced handling and more predictable suspension geometry

Authoritative Vehicle Fitment:

Fits select 1985-1998 Volkswagen Golf and Jetta models.

Upgrade your vehicle's handling precision with Prothane Front Sway Bar Bushings. Designed to replace soft or deteriorated factory rubber, these high-performance polyurethane bushings provide a much firmer connection between the front sway bar and the chassis. By significantly reducing bushing deflection, they help minimize body roll during cornering and improve overall steering response for a more planted feel on the road.

• Bore Diameter: 19mm
• Material: High-durometer polyurethane for superior durability
• Resistant to automotive oils, road salt, and contaminants that degrade standard rubber
• Red finish for a performance appearance
• Manufacturer Part Number: 22-1101