Upgrade your suspension's responsiveness with the Prothane 19-419-BL Universal Sway Bar End Link Set. Designed for vehicles requiring a 7-3/8" (7.375") mounting length, these links replace compliant factory rubber bushings with high-durometer polyurethane to minimize sway bar deflection and improve chassis stability during cornering.

Constructed to withstand harsh road conditions and performance driving, these end links provide a more direct connection between the sway bar and the control arms. The result is flatter cornering and more predictable handling characteristics. Each set includes heavy-duty hardware and zinc-plated sleeves for maximum corrosion resistance and longevity.

• Mounting Length: 7-3/8" (7.375")
• Bushing Material: Black Polyurethane
• Finish: Zinc-plated hardware for durability
• Reduces body roll and improves steering response
• Sold as a complete set for one sway bar
• Manufacturer Part Number: 19-419-BL

Fits 1994-2004 Ford Mustang models including Base, GT, SVT Cobra, Mach 1, Bullitt, and GTS.

Replace your worn or soft rubber factory links with the Prothane 19-416 Universal Sway Bar End Link Set. These links are engineered to provide a more direct connection between the sway bar and the suspension, reducing body roll and improving steering response during cornering. Featuring Prothane’s signature red polyurethane bushings, this set resists road salt, oil, and ozone degradation far better than original equipment rubber.

• Part Number: 19-416
• Mounting Length: 5.0 inches (measured from inside of washers)
• Bushing Material: High-performance red polyurethane
• Hardware: Grade 8 bolts with nylock nuts and zinc-plated washers for corrosion resistance
• Application: Universal fitment with specific compatibility for SN95 and New Edge Ford Mustangs

Fits select 1964-2002 Buick, Chevrolet, Ford, Mercury, and Pontiac vehicles.

Replace your vehicle's soft, degraded factory bushings with the Prothane 19-409 Universal Sway Bar End Link Set. This 4.5-inch mounting length kit is designed to improve steering response and reduce body roll by providing a more rigid connection between the sway bar and the chassis. Unlike OE rubber that flexes and degrades over time, Prothane’s red polyurethane bushings are engineered to withstand road oils, chemicals, and extreme weather without cracking or distorting.

• Mounting Length: 4.5 in
• Bushing Material: Red Polyurethane
• Component Type: Sway Bar End Link
• Manufacturer Part Number: 19-409
• Improves suspension stability and handling precision

Fits select 1955-1996 American Motors, Buick, Cadillac, Chevrolet, Dodge, Oldsmobile, Plymouth, and Pontiac vehicles.

Restore the handling and steering response of your classic or daily driver with the Prothane 19-408-BL universal sway bar end link set. Over time, original equipment rubber bushings compress, crack, and rot, leading to excessive body roll and sloppy suspension feedback. These high-performance replacements utilize Prothane’s proprietary polyurethane formula, which is engineered to maintain its shape under heavy load and resist degradation from road oils, salt, and ozone.

This kit provides a precise 4-1/4 inch mounting length (measured from the center of the sway bar to the center of the control arm mounting point) and includes everything needed for a complete axle installation. The black polyurethane bushings offer a clean, factory look while delivering significantly more durability than standard rubber components.

• Manufacturer Part Number: 19-408-BL
• Mounting Length: 4.25 inches (108mm)
• Bushing Material: High-durometer black polyurethane
• Hardware: Heavy-duty bolts, washers, and locking nuts included
• Design: Direct replacement for worn or compressed factory end links
• Quantity: Sold as a pair (set of 2)

Fits select 1955-1996 American Motors, Buick, Cadillac, Chevrolet, Dodge, Oldsmobile, Plymouth, and Pontiac models.

The Prothane 19-408 Universal Sway Bar End Link Set provides a direct performance upgrade over standard rubber components. By utilizing high-durometer polyurethane bushings, this set eliminates the deflection common with aged OE links, ensuring your sway bar transfers energy efficiently to reduce body roll and improve steering response. These links are engineered to withstand road oils, ozone, and extreme weather without cracking or rotting, unlike factory rubber bushings.

• Manufacturer Part Number: 19-408
• Mounting Length: 4 1/4 inches (4.25")
• Material: High-performance polyurethane
• Hardware: Includes Grade 5 bolts, lock nuts, washers, and sleeves
• Color: Red finish
• Installation: Bolts to factory mounting points on compatible vehicle applications

Fits select 1963-1982 Chevrolet, Ford, Dodge, Nissan, Plymouth, Mercury, and Lincoln models.

Replace your vehicle's soft, original equipment rubber bushings with the Prothane 19-405-BL Universal End Link Set. These polyurethane end links are designed to eliminate the deflection common with OE rubber, ensuring your sway bar engages immediately for flatter cornering and more predictable handling. Constructed from high-density polyurethane, these bushings resist oil, grease, and road grime that typically degrade rubber over time.

This universal set features a 3-1/4 inch (3.125") mounting length, measured from the inside of the washers. The kit includes everything needed for a complete installation, including polyurethane bushings, zinc-plated sleeves, grade-5 hardware, and washers to ensure long-term durability and corrosion resistance.

• Manufacturer Part Number: 19-405-BL
• Mounting Length: 3.25 inches
• Bushing Material: Black Polyurethane
• Hardware: Zinc-plated sleeves and bolts included
• Fitment: Universal application based on length requirements

Improve your vehicle's cornering stability and steering response with Prothane Universal Greasable Sway Bar Bushings (19-1182). These 26mm bushings are engineered from high-grade polyurethane, replacing soft factory rubber that often deflects under load or degrades over time. The result is a firmer suspension feel and significantly reduced body roll.

These bushings feature a greasable design, including heavy-duty Type B brackets equipped with zerk fittings. This allows for routine lubrication without disassembly, effectively eliminating the common squeaking associated with performance polyurethane. The durable red material is resistant to road salt, oils, and other contaminants that typically destroy OEM components.

• Fits 26mm diameter sway bars
• Includes Type B greasable mounting brackets
• Manufactured from durable red polyurethane
• Provides superior resistance to deflection compared to rubber
• Greasable design for quiet, long-lasting operation
• Manufacturer Part Number: 19-1182

Eliminate suspension slop and improve cornering response with Prothane 19-1156-BL Greasable Sway Bar Bushings. These performance bushings replace soft, compliant factory rubber with high-durometer polyurethane to prevent sway bar deflection and maintain better tire contact under heavy cornering loads.

This universal kit features heavy-duty Type A brackets equipped with integrated Zerk grease fittings. This design allows for periodic maintenance to ensure quiet, squeak-free operation while providing the stiffness required for precise handling. The black polyurethane material is engineered to resist oil, road salt, and ozone, preventing the cracking and rot common in OEM components.

• Bore Diameter: 7/8in
• Bracket Style: Type A stamped steel bracket
• Material: Proprietary black polyurethane
• Feature: Greasable design with integrated Zerk fittings
• Included: 2 bushings and 2 brackets
• Manufacturer Part Number: 19-1156-BL

Upgrade your suspension's responsiveness and eliminate the common squeaks associated with standard polyurethane components. These Prothane Universal Greasable Sway Bar Bushings are designed for 3/4-inch diameter sway bars and feature a specialized greaseable design. Unlike standard bushings, these include integrated zerk fittings and internal grease grooves that allow for consistent lubrication without the need for disassembly.

Constructed from high-performance polyurethane, these bushings provide a much firmer pivot point than factory rubber, significantly reducing deflection. This results in flatter cornering and improved steering feedback. The material is engineered to resist road salt, oil, and weather, ensuring long-term durability under harsh driving conditions.

• Fits 3/4-inch (0.75") diameter sway bars
• Includes heavy-duty Type A mounting brackets with zerk fittings
• Internal grease grooves for even lubrication and quiet operation
• Durable black polyurethane resists compression set and environmental degradation
• Replaces soft OE rubber for better roll control
• Manufacturer Part Number: 19-1154-BL

Upgrade your vehicle's handling response with Prothane 27mm Universal Sway Bar Bushings (19-1143). Designed as a high-performance replacement for soft factory rubber, these polyurethane bushings minimize sway bar deflection and reduce body roll during cornering. Unlike OEM rubber, Prothane's specialized polyurethane formula is resistant to oil, grease, road salt, and ozone, ensuring long-term durability and consistent suspension geometry.

These bushings are specifically sized for a 27mm sway bar diameter and are engineered to fit Prothane "B" style brackets. By providing a firmer mounting point, they allow the sway bar to work more efficiently, delivering more predictable feedback through the chassis.

• Bore Diameter: 27mm
• Bracket Fitment: Prothane B Bracket
• Material: High-Durometer Polyurethane
• Finish: Red
• Part Number: 19-1143

Upgrade your suspension response with Prothane 19-1110-BL universal sway bar bushings. These high-performance polyurethane bushings are designed to replace soft, prone-to-fail factory rubber, providing a much firmer pivot point for the sway bar. By minimizing deflection, these bushings help reduce body roll and maintain better tire contact during aggressive cornering or heavy load transitions.

• Precision-molded for 1-inch (25.4mm) diameter sway bars
• Specifically engineered for use with "A" style mounting brackets
• Constructed from durable black polyurethane to resist road salt, oil, and ozone degradation
• Improves handling predictability and restores steering feel
• Manufacturer Part Number: 19-1110-BL

Upgrade your vehicle’s handling and stability with Prothane performance polyurethane sway bar bushings. Designed as a durable replacement for soft factory rubber, these 7/8-inch bushings minimize sway bar deflection, maintaining consistent suspension geometry during cornering and effectively reducing body roll.

This universal kit is engineered for use with "A-style" mounting brackets and is manufactured from high-grade polyurethane for superior resistance to road salt, oil, and ozone. Replacing worn-out OE components with this Prothane set provides a tighter, more responsive steering feel for both daily driving and performance applications.

• Fits 7/8-inch (0.875") diameter sway bars
• Designed specifically for A-style brackets
• High-performance red polyurethane construction for longevity
• Resistant to chemicals and environmental degradation
• Manufacturer Part Number: 19-1108

Fits 1991-1995 Toyota MR2 Base and Turbo.

Improve your vehicle's suspension geometry and cornering stability with Prothane Front Sway Bar Bushings. These 19mm bushings are designed as a performance replacement for the soft factory rubber units, which are prone to deflection and degradation over time. Precision-molded from high-grade polyurethane, they provide a firmer connection between the sway bar and the chassis to minimize body roll and sharpen steering response during aggressive maneuvers.

• Specifically sized for 19mm diameter front sway bars
• High-performance polyurethane construction resists road contaminants, oil, and heat
• Durable red finish provides a custom performance look
• Enhances chassis rigidity and steering precision by reducing bar movement
• Includes high-quality bushings for a complete front sway bar refresh
• Manufacturer Part Number: 18-1126

Fits 1998-2005 Lexus GS300, GS400, and GS430 models.

Improve the steering response and cornering stability of your Lexus GS by replacing soft factory rubber with Prothane high-performance polyurethane front sway bar bushings. This 28.5mm bushing kit (MPN 18-1123-BL) is designed to minimize play and keep your sway bar centered, allowing the suspension to react more predictably to lateral forces. Unlike standard rubber that can crack and deteriorate over time, Prothane's polyurethane formula is resistant to oil, road salt, and heat, ensuring consistent performance for the life of the vehicle.

• Direct replacement for 28.5mm front sway bar bushings
• Polyurethane material maintains alignment and reduces body roll
• Resistant to automotive fluids and environmental degradation
• Finished in Black
• Manufacturer Part Number: 18-1123-BL

Vehicle Fitment:

Fits 2000-2001 Toyota Tundra (Base, Limited, and SR5).

Restore steering precision and reduce body roll in your first-generation Tundra with Prothane's polyurethane front sway bar bushings. Factory rubber bushings are prone to softening and cracking over time, leading to vague handling and decreased stability. These 24mm performance replacements provide the firmness necessary to keep your sway bar properly located during cornering, ensuring more immediate suspension response.

• Direct replacement for worn OE front sway bar bushings
• Constructed from high-grade polyurethane for superior durability and fluid resistance
• Maintains better alignment of the sway bar for flatter cornering
• Fits 24mm diameter sway bars
• Finish: Black
• Manufacturer Part Number: 18-1118-BL

Fits 1996-2001 Toyota 4Runner models including Base, Limited, and SR5 trims.

Upgrade your 4Runner's suspension performance by replacing soft, worn-out factory rubber bushings with this Prothane polyurethane kit. These 19mm rear sway bar bushings are designed to provide a more rigid connection between the sway bar and the chassis, which significantly reduces body roll and improves overall steering response during cornering. Unlike standard rubber, Prothane's high-performance polyurethane is resistant to road salt, oil, and environmental degradation, ensuring a long-lasting improvement in handling.

• Manufacturer Part Number: 18-1116
• Inside Diameter: 19mm
• Material: High-durometer polyurethane
• Color: Red
• Installation Position: Rear sway bar
• Fits vehicles with 19mm factory sway bars

Fits 1996-2001 Toyota 4Runner (Base, Limited, and SR5).

Replace aging or soft factory rubber components with Prothane high-performance polyurethane front sway bar bushings. These 26mm red bushings are designed to provide a firmer, more responsive steering feel by significantly reducing the deflection often found in original equipment (OE) rubber. This upgrade helps maintain proper sway bar alignment during cornering, improving overall vehicle stability and reducing body roll.

• Bore Diameter: 26mm
• Color: Red
• Material: High-durometer polyurethane for long-lasting performance
• Replaces worn factory rubber to restore handling precision
• Resistant to oil, grease, and road contaminants
• Manufacturer Part Number: 18-1115

Fits 1990-1995 Toyota 4Runner SR5.

Restore steering precision and reduce body roll with Prothane polyurethane front sway bar bushings. Designed to replace soft or degraded original equipment rubber, these high-performance bushings maintain the alignment of the sway bar against the chassis more effectively than factory components. This leads to more immediate suspension feedback and flatter cornering during spirited driving or off-road use.

• Specifically engineered for 24mm diameter front sway bars
• Firm polyurethane construction resists degradation from road salt, oil, and grease
• Enhances overall handling and chassis stability
• Includes bushings for both sides of the front sway bar
• Finish: Black
• Manufacturer Part Number: 18-1109-BL

Fits 1998-2005 Subaru Impreza L, RS, and WRX models.

Eliminate suspension slop and restore cornering precision with Prothane rear sway bar bushings. Factory rubber bushings are prone to drying out and cracking, which leads to vague handling and increased body roll. These 17mm polyurethane replacements offer a much higher durometer than OE rubber, ensuring your sway bar remains securely anchored for immediate chassis response.

• Precision-molded 17mm inner diameter for a tight fit on factory sway bars
• Durable red polyurethane construction resists road salt, oil, and environmental degradation
• Improves handling characteristics by reducing deflection under lateral loads
• Direct replacement for worn factory sway bar bushings
• Manufacturer Part Number: 16-1102

Fits 1998-2005 Subaru Impreza (L and RS), WRX, and WRX STI.

Restore steering precision and reduce body roll with Prothane performance front sway bar bushings. These 20mm bushings are engineered from high-grade polyurethane to replace the soft factory rubber components that are prone to cracking and excessive deflection. By securing the sway bar more effectively, these bushings ensure more immediate suspension response and maintain better alignment geometry during cornering.

• Diameter: 20mm specifically for factory or aftermarket 20mm front bars
• Material: Durable red polyurethane resistant to road oils, salt, and chemicals
• Performance: Minimizes sway bar play for flatter cornering and improved feedback
• Compatibility: Replaces worn OE-style bushings on GC and GD chassis models
• Part Number: 16-1101

Fits 2004-2006 Nissan Titan LE, SE, and XE (2WD/4WD).

Restore steering precision and reduce body roll with Prothane polyurethane front sway bar bushings. These 34mm bushings replace soft or dry-rotted factory rubber, which often causes vague handling and clunking. Unlike standard rubber, Prothane’s specialized polyurethane compound does not compress under load, keeping your sway bar properly indexed for flatter cornering and more predictable suspension geometry. This upgrade is ideal for high-mileage Titans where the OE bushings have lost their tension.

• Precision-molded 34mm bore for a tight fit on the stabilizer bar
• High-grade polyurethane construction resists oil, grease, and road contaminants
• Durable black finish for a professional appearance
• Direct replacement for 2004-2006 Nissan Titan front bushings
• Manufacturer Part Number: 14-1123-BL

Fits 2004-2006 Nissan Titan LE, SE, and XE (2WD and 4WD models).

Restore the handling and steering precision of your Nissan Titan with the Prothane 14-1123 Front Sway Bar Bushing kit. Over time, factory rubber bushings become soft, crack, and lose their ability to hold the sway bar firmly, leading to increased body roll and sluggish response. These high-performance polyurethane bushings are engineered to provide a more rigid connection, ensuring your stabilizer bar performs as intended during cornering and off-road maneuvers.

• Manufacturer Part Number: 14-1123
• Material: High-density polyurethane
• Sway Bar Diameter: 34mm
• Color: Red
• Position: Front
• Included: Pair of front sway bar bushings

Polyurethane is significantly more durable than OE rubber, resisting degradation from oils, road salt, and ozone. This kit is a direct-fit replacement designed for 34mm diameter bars, providing a long-lasting solution for worn-out suspension components.

Fits 2003-2004 Nissan 350Z models including Base, Enthusiast, Performance, Touring, and Track trims.

Restore precision to your suspension with the Prothane 14-1115 Front Sway Bar Bushing kit. These 34mm bushings replace soft, compliant factory rubber with high-durometer polyurethane to minimize deflection and ensure your stabilizer bar performs as intended. By reducing the delay in sway bar engagement during cornering, this upgrade delivers flatter handling and more predictable steering response.

Unlike OEM rubber that eventually dry rots or softens from exposure to road grime and oils, Prothane’s proprietary polyurethane is engineered for long-term durability and resistance to environmental contaminants. This kit is designed for a direct-fit installation within the factory mounting brackets, providing a significant performance improvement with minimal maintenance.

• Manufacturer Part Number: 14-1115
• Bushing Size: 34mm
• Material: High-Performance Polyurethane
• Color: Red
• Placement: Front Sway Bar

Fits select 1987-1997 Nissan D21, Pathfinder, and Pickup 4WD models.

Upgrade your vehicle's handling response and suspension stability with Prothane front sway bar bushings. Over time, original equipment rubber bushings degrade, leading to increased body roll and vague steering. These 20mm polyurethane replacements (MPN 14-1106) are engineered to withstand the rigors of both daily driving and off-road use, maintaining their shape under load to keep your sway bar properly indexed. The result is more predictable cornering and a more connected feel to the road or trail.

• Precision-molded 20mm inner diameter ensures a secure fit on the factory sway bar
• Durable red polyurethane construction resists degradation from oils, grease, and road contaminants
• Enhances steering response and reduces chassis roll by minimizing bushing deflection
• Manufacturer Part Number: 14-1106

Fits 2003-2006 Mitsubishi Lancer Evolution (including Evolution, MR, RS, and SE models).

Replace the soft, aging factory rubber with Prothane 24mm Front Sway Bar Bushings to restore handling precision on your Lancer Evolution. These high-performance polyurethane bushings are engineered to resist deformation under heavy cornering loads, ensuring your sway bar maintains effective leverage to reduce body roll. Unlike OEM rubber that degrades from road grime, heat, and oil exposure, Prothane’s proprietary polyurethane formula provides long-term durability and consistent suspension geometry for both street and track use.

• Specifically sized for 24mm front sway bars
• High-durometer black polyurethane resists deflection
• Improves steering response and chassis feedback
• Direct fit replacement for original equipment bushings
• Resistant to automotive fluids and road salt
• Manufacturer Part Number: 13-1108-BL

Fits 1995-1999 Mitsubishi Eclipse (GST, GSX) and Eagle Talon (TSi).

Eliminate suspension slop and improve cornering response with Prothane 18mm rear sway bar bushings. Designed to replace soft original equipment rubber that degrades over time, these high-durometer polyurethane bushings minimize sway bar deflection during hard cornering. By maintaining better alignment and reducing body roll, they provide more consistent and predictable vehicle dynamics for your AWD or FWD chassis.

• Precision-molded from high-performance black polyurethane
• Sized specifically for 18mm diameter rear sway bars
• Direct replacement for factory bushings to maintain OEM mounting points
• Highly resistant to automotive fluids, road salt, and environmental degradation
• Manufacturer Part Number: 13-1103-BL

Fits 1995-1999 Mitsubishi Eclipse (GSX/GST) and 1995-1998 Eagle Talon TSi.

Restore the handling precision of your suspension with Prothane 18mm Red Rear Sway Bar Bushings (MPN: 13-1103). Factory rubber bushings are prone to softening and cracking over time, which allows for excessive sway bar movement and increased body roll. These polyurethane replacements offer a higher durometer for superior rigidity, ensuring your rear sway bar remains properly indexed during aggressive cornering and high-load maneuvers.

Crafted from premium polyurethane, these bushings are engineered to resist degradation from automotive fluids, road salt, and environmental debris, providing a significantly longer service life than OE rubber. They serve as a direct-fit upgrade for vehicles equipped with an 18mm rear sway bar.

• Replaces worn OE rubber bushings to reduce body roll
• Material: High-performance polyurethane
• Diameter: 18mm
• Finish: Red
• Manufacturer Part Number: 13-1103

Fits select 1995-1999 Mitsubishi Eclipse and Eagle Talon models.

Improve your vehicle's handling and cornering precision by replacing soft, worn-out rubber factory units with Prothane high-performance polyurethane rear sway bar bushings. These 15mm bushings are engineered to resist grease, oil, and road grime while providing a much higher level of rigidity than OE rubber. By reducing sway bar deflection, these bushings help maintain more consistent suspension geometry and reduce body roll during aggressive maneuvers.

• Bore Diameter: 15mm
• Material: High-density polyurethane
• Color: Red
• Resistant to road chemicals and oils
• Manufacturer Part Number: 13-1102

Vehicle Fitment:

Fits 1995-1999 Mitsubishi Eclipse and Eagle Talon models (19mm sway bar diameter).

Eliminate steering slop and improve cornering response by replacing soft, worn-out factory rubber with Prothane polyurethane front sway bar bushings. Over time, original equipment rubber bushings dry out, crack, and compress, allowing the sway bar to shift and reducing its effectiveness. These 19mm red polyurethane bushings provide a firm, stable pivot point that keeps the anti-roll bar properly aligned for more predictable handling and reduced body roll during aggressive driving.

• Precision fit for 19mm front anti-sway bars
• Durable polyurethane construction resists road salt, oils, and automotive fluids
• Maintains alignment and improves suspension geometry under load
• Direct replacement for OE rubber bushings
• Vibrant red finish for a custom look

Technical Specifications

• Manufacturer Part Number: 13-1101
• Bore Diameter: 19mm
• Material: Polyurethane
• Color: Red
• Location: Front Sway Bar

Vehicle Fitment

Fits 1999-2004 Jeep Grand Cherokee Laredo, Limited, Overland, Special Edition, and Sport models.

Restore steering precision and eliminate body roll by replacing soft, degraded factory rubber with Prothane's high-performance polyurethane rear sway bar bushings. These 9/16-inch bushings (MPN 1-1114) provide a firmer mount for the rear stabilizer bar, ensuring consistent suspension geometry and improved cornering stability. Designed to resist road salt, oil, and ozone, these polyurethane components outlast original equipment while maintaining their shape under heavy loads.

• Manufacturer Part Number: 1-1114
• Diameter: 9/16 inch
• Color: Red
• Material: Performance-grade polyurethane
• Position: Rear sway bar / Stabilizer bar mount