Fits 1999-2004 Jeep Grand Cherokee Laredo, Limited, Overland, Sport, and Special Edition.

Upgrade your vehicle's handling response by replacing soft, deteriorated factory rubber with the Prothane polyurethane front sway bar bushing kit. These 1 1/4-inch bushings provide a firmer pivot point for the sway bar, significantly reducing deflection and body roll during cornering. Unlike OE rubber, this high-performance polyurethane is engineered to withstand road oils, salt, and weather without cracking or rotting, ensuring long-term suspension stability.

• Manufacturer Part Number: 1-1113
• Inside Diameter: 1 1/4in
• Material: Premium Red Polyurethane
• Placement: Front Sway Bar
• Fitment: 1999-2004 Jeep Grand Cherokee (All Trim Levels)

Fits 1997-2006 Jeep Wrangler TJ (SE, Sport, Sahara, Rubicon, Unlimited, X, and 65th Anniversary Edition).

Restore steering precision and minimize body roll with the Prothane 1-1111 Front Sway Bar Bushing Kit. Over time, factory rubber bushings degrade, soften, and crack, resulting in sloppy handling and audible suspension clunks. These 30.5mm replacements are manufactured from Prothane’s signature high-density polyurethane, which provides a much firmer pivot point for the sway bar to maintain alignment during cornering and off-road articulation.

• Bore Diameter: 30.5mm
• Material: High-grade red polyurethane for superior durability and chemical resistance
• Direct replacement for worn OE rubber bushings in factory mounting locations
• Designed to resist road salt, oils, and grease that typically destroy rubber
• Includes two front sway bar bushings
• Manufacturer Part Number: 1-1111

Fits 1984-2001 Jeep Cherokee and 1986-1992 Jeep Comanche.

Replace failing or soft factory rubber components with Prothane 1-1108 front sway bar bushings. These polyurethane bushings are engineered to improve handling and steering response by reducing sway bar deflection during cornering. This allows the suspension system to maintain better alignment and contact under load.

Unlike standard OEM rubber, Prothane’s polyurethane formula is highly resistant to degradation from road salts, oil, grease, and ozone. This ensures the bushings won't rot or lose their shape, providing a long-lasting solution for both street and trail use.

• Manufacturer Part Number: 1-1108
• Position: Front Sway Bar
• Sway Bar Diameter: 1 inch
• Material: High-Performance Polyurethane
• Color: Red
• Application: Designed for 1-inch diameter factory sway bars

Fits 1987-1995 Jeep Wrangler YJ models including Base, Sahara, Laredo, Renegade, and SE.

Restore steering precision and cornering stability to your Jeep Wrangler YJ with Prothane polyurethane front sway bar bushings. Factory rubber bushings are prone to drying, cracking, and compression set over time, which allows the sway bar to shift and results in sloppy handling and increased body roll. These 1 1/8-inch (1.125") diameter bushings provide a firm, stable mount that ensures your anti-sway bar performs effectively during both highway driving and off-road articulation.

Engineered from Prothane’s specialized polyurethane formula, these bushings are highly resistant to road salts, oils, and hydraulic fluids that typically destroy OE rubber. The black finish offers a clean, factory-style appearance while providing a significant upgrade in durability and service life.

• Direct replacement for soft, worn-out factory sway bar bushings
• Specifically sized for 1 1/8-inch (1.125") diameter front sway bars
• Durable black polyurethane construction resists chemicals and weathering
• Reduces unwanted suspension deflection for better steering response
• Manufacturer Part Number: 1-1107-BL

Fits 1987-1995 Jeep Wrangler (YJ) models including Base, Sahara, Sport, and SE equipped with a 1-1/8 inch diameter front sway bar.

Restore steering precision and eliminate front-end body roll by replacing worn-out, compliant factory rubber bushings with these high-performance polyurethane components from Prothane. Standard rubber bushings often perish due to exposure to oils, road salt, and ozone, leading to excessive movement in the sway bar. These Prothane bushings are engineered to maintain their shape and provide a firm, stable mount for the sway bar, ensuring immediate suspension response during cornering.

• Part Number: 1-1107
• Material: High-density polyurethane
• Color: Red
• Bushing Size: 1-1/8 inch (1.125in) ID
• Fitment Type: Direct replacement for factory mounts
• Resistant to road chemicals and oils

Fits 1984-2001 Jeep Cherokee and Comanche models.

Replace your soft, factory rubber components with these Prothane front sway bar bushings to restore handling precision. Unlike OE rubber that degrades over time due to oil, ozone, and heat, these polyurethane bushings are engineered to maintain their shape and provide a stable mounting point for the sway bar. This upgrade reduces deflection and body roll, ensuring more consistent tire contact and improved steering response.

• Bore Diameter: 25mm
• Material: High-performance polyurethane
• Finish: Red
• Resistant to road chemicals, grease, and oil
• Replaces worn factory bushings for better suspension geometry
• Manufacturer Part Number: 1-1104

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models with a 15/16-inch front sway bar.

Replace your soft, worn-out factory rubber bushings with this Prothane polyurethane front sway bar bushing kit. Over time, standard rubber bushings degrade from exposure to oil, road salt, and ozone, leading to sloppy steering and excessive body roll. Prothane polyurethane is a superior alternative that provides the necessary stiffness to keep your sway bar properly located while maintaining enough flexibility for off-road articulation.

These red bushings are precision-molded for a direct fit to the 15/16-inch diameter front sway bar found on many CJ-series Jeeps. By minimizing deflection, these bushings help stabilize your suspension geometry and provide more predictable handling on and off the trail.

• Part Number: 1-1101
• Material: Polyurethane
• Color: Red
• Inner Diameter: 15/16-inch
• Compatible with factory mounting hardware

Fits select 2004-2007 Subaru STI and 2006-2007 Subaru WRX.

Restore handling precision and eliminate suspension play with the PERRIN 22mm Rear Sway Bar Bushing. These bushings are designed to replace worn or soft factory rubber components, providing a more rigid mounting point for the sway bar. By reducing lateral deflection, they ensure that your suspension reacts immediately to cornering forces, resulting in improved body control and more predictable vehicle dynamics.

• Specifically sized for 22mm rear sway bars
• Reduces compliance and improves sway bar effectiveness
• Direct replacement for degraded factory bushings
• Includes one rear sway bar bushing
• Manufacturer Part Number: X-PSP-SUS-207

Fits select 2007-2013 Infiniti G35, G37, and Nissan 370Z.

Maintain the handling performance of your vehicle with the Hotchkis Sport Suspension 22441RB Rear Sway Bar Rebuild Service Kit. This kit is specifically engineered to refresh the 22441 Hotchkis rear sway bar, replacing worn wear items to restore precision and eliminate noise caused by degraded components.

• Direct service replacement for Hotchkis Sport Suspension kit 22441
• Contains necessary bushings and links to refresh the rear sway bar assembly
• Restores original suspension response and reduces unwanted movement
• Manufacturer Part Number: 22441RB

Fits 2003-2009 Nissan 350Z and 2003-2007 Infiniti G35.

Restore the handling precision and quiet operation of your vehicle with the Hotchkis Sport Suspension Front Sway Bar Rebuild Kit. This kit is specifically designed to refresh the wearable components of the Hotchkis front sway bar (part number 22413), replacing tired or degraded hardware with original-specification parts.

• Specifically engineered for Hotchkis Front Sway Bar #22413
• Replaces worn-out bushings and mounting hardware to eliminate suspension play
• Restores original suspension responsiveness and flat cornering characteristics
• High-quality materials designed for longevity in street and track environments
• Manufacturer Part Number: 22413RB

Maintaining your sway bar hardware ensures consistent suspension geometry and helps prevent the clunks or squeaks often associated with aged bushings and worn mounting points.

Upgrade your vehicle's handling and body roll control with the Energy Suspension greaseable sway bar bushing set. Unlike factory rubber bushings that soften and crack over time, these bushings are molded from Hyper-Flex™ polyurethane. This higher-durometer material maintains the alignment of your sway bar for immediate steering response and reduced chassis roll under cornering loads.

Designed for easy maintenance, these bushings feature a greaseable design with integrated Zerk fittings, allowing you to re-lubricate the contact surface without disassembling the suspension. This ensures quiet operation and prevents the binding often associated with high-performance polyurethane components. Each set includes heavy-duty zinc-plated brackets designed to handle the increased stiffness of the Hyper-Flex™ material.

• Specifically fits 32mm diameter sway bars
• Greaseable design with Zerk fittings for simple maintenance and noise reduction
• Durable Hyper-Flex™ polyurethane construction resists road chemicals and oil
• Includes two bushings and two greaseable mounting brackets
• Replaces compliant OEM rubber to improve sway bar efficiency
• Manufacturer Part Number: 9.5166R

Fits 2006-2007 Pontiac Solstice and 2007 Saturn Sky.

Energy Suspension Hyper-Flex greaseable sway bar bushings provide a critical performance upgrade for the Kappa platform suspension. Unlike OEM rubber bushings that deflect under load and degrade over time, these polyurethane components maintain sway bar alignment and allow the system to function at maximum efficiency. The greaseable design features integrated Zerk fittings on the brackets, allowing for easy maintenance to ensure quiet, friction-free operation without the need for disassembly.

• Precision-molded Hyper-Flex polyurethane construction for superior durability
• 15/16in bore size to match factory or aftermarket sway bar diameters
• Resistant to road oils, salt, and ozone compared to standard rubber
• Greaseable brackets with Zerk fittings prevent squeaking and binding
• Reduces body roll and improves steering response by minimizing bushing deflection
• Includes heavy-duty zinc-plated brackets and polyurethane bushings
• Manufacturer Part Number: 9.5160G

Fits select 1970-1991 Chevrolet and GMC C10/C20/C30, K5 Blazer, and Suburban models equipped with a 1-1/4 inch diameter front sway bar.

Upgrade your classic GM truck's handling and steering response with the Energy Suspension 3.5177R sway bar bushing set. Engineered from Hyper-Flex polyurethane, these bushings provide a significant performance increase over factory rubber by reducing deflection and maintaining alignment during cornering. This allows your sway bar system to operate at maximum efficiency, providing the feel of a larger performance bar without the cost.

The greaseable design is a major serviceability upgrade, featuring heavy-duty brackets with integrated zerk fittings and internal grease channels. This ensures quiet, squeak-free operation and long-term durability in harsh environments. These bushings are resistant to oil, road salt, and ozone, making them a permanent solution for worn OE components.

• Replaces soft, degraded factory rubber bushings to restore handling precision
• Greaseable bracket design with zerk fittings for easy maintenance and quiet operation
• Constructed from high-performance red Hyper-Flex polyurethane
• Designed specifically for 1.25-inch (31.75mm) diameter sway bars
• Includes polyurethane bushings and heavy-duty greaseable mounting brackets
• Manufacturer Part Number: 3.5177R

Fits select 1967-1995 Chevrolet and GMC trucks, SUVs, and vans, including C10/C20 pickups, K5 Blazer, and G10/G20 vans with 1-1/16 inch sway bars.

Eliminate the spongy handling of worn-out rubber with the Energy Suspension greaseable sway bar bushing set. These bushings are engineered from Hyper-Flex polyurethane, a high-performance material that provides much greater stiffness than factory rubber. By reducing sway bar deflection, this kit allows your vehicle's stabilizer system to work at maximum efficiency, improving cornering stability and predictable handling.

The greaseable design features heavy-duty brackets with integrated zerk fittings, allowing you to lubricate the bushings without disassembly. This ensures quiet, squeak-free operation and a longer service life, even in harsh environments where road salt and oils typically rot OEM rubber components.

• Bar Diameter: 1-1/16 inch (1.0625 in)
• Material: Hyper-Flex Polyurethane
• Color: Red
• Design: Greaseable with zerk-fitted brackets
• Includes: Polyurethane bushings and heavy-duty mounting brackets
• Manufacturer Part Number: 3.5175R