Fits select 2015-2023 Audi A3 Quattro, S3, RS3, and Volkswagen Golf Alltrack and Golf R.

The SuperPro Roll Control adjustable sway bar kit is engineered to reduce body roll and sharpen steering response without sacrificing ride quality. This 26mm front sway bar allows you to increase effective bar rates by 30-50% over the original equipment by simply adjusting the end link positioning. This adjustability enables drivers to fine-tune the handling balance and mitigate understeer using common hand tools.

Constructed for a precision factory fit, each bar features a robust four-step protection process: a zinc treatment followed by an epoxy coating and a two-stage powder coat. This ensures maximum resistance against corrosion and road debris in harsh driving conditions. The kit includes heavy-duty end links designed to work in harmony with the increased rates of the 26mm bar.

• Part Number: RC0052FZ-26KIT
• Diameter: 26mm
• Adjustment Range: 30-50% stiffness increase over OE
• Finish: Four-step zinc, epoxy, and two-stage powder coat
• Included Hardware: Adjustable sway bar and matching end link set
• Fitment: Direct replacement for factory front sway bar

Fits 1993-1998 Toyota Supra (Base / Twin Turbo).

The SuperPro Roll Control adjustable front sway bar is designed to significantly reduce body roll and sharpen cornering response. By replacing the factory bar with this 30mm heavy-duty alternative, drivers can achieve a 30-50% increase in sway bar rate over the original equipment. The two-position adjustment points allow for precise chassis tuning using common hand tools, enabling you to dial in the ideal balance of understeer or oversteer for either weekend autocross or high-speed track use.

Built for durability and fitment accuracy, this sway bar is precisely formed for a factory-style fit while maximizing compatibility with existing suspension components. Each bar undergoes a comprehensive four-step finishing process—including a zinc treatment, epoxy coating, and a two-stage powder coat—to ensure maximum corrosion resistance even in harsh environments.

• Part Number: RC0020FZ-30
• Diameter: 30mm
• Adjustment: 2-Position (30-50% stiffer than OE)
• Construction: High-strength steel with 4-step anti-corrosion finish
• Includes: Sway bar and necessary hardware for installation
• Benefits: Reduced body roll, improved grip, and adjustable chassis balance

Fits select 2008-2021 Subaru Impreza, WRX, STI, Forester, Legacy, Outback, and Crosstrek models.

The SuperPro Roll Control rear sway bar is engineered to reduce body roll and sharpen cornering response without compromising ride quality. This 24mm heavy-duty bar features three adjustment points, allowing you to increase the effective sway bar rate by 30-50% over the original equipment (OE) setup. By changing the end link mounting position, you can fine-tune the chassis balance to neutralize understeer or induce rotation, tailoring the car's behavior for daily driving, autocross, or high-speed track work.

Each bar is precisely formed for a factory-style fit and features a robust four-step protection process. This includes a zinc treatment, an epoxy coating, and a two-stage powder coat to ensure maximum resistance against corrosion and road debris in harsh environments.

• Diameter: 24mm
• Adjustability: 3-Position (30-50% rate increase over OE)
• Finish: 4-Step anti-corrosion coating (Zinc, Epoxy, 2-Stage Powder Coat)
• Installation: Bolts to factory mounting points with common hand tools
• Manufacturer Part Number: RC0013RZ-24

Fits select 2006-2018 Audi A3 Quattro and TT Quattro, and Volkswagen Golf R, R32, and Tiguan models.

The SuperPro Roll Control rear sway bar kit is engineered to reduce body roll and sharpen cornering response without compromising ride quality. Featuring a 26mm diameter and two-position adjustability, this bar allows you to increase sway bar rates by 30-50% over the original equipment. This range of adjustment lets you fine-tune your vehicle's handling balance to suit your driving style or specific track conditions using standard hand tools.

Each bar is precisely cold-formed for an exact factory fit. To ensure long-term durability in all environments, SuperPro utilizes a specialized four-step finish consisting of a zinc treatment, epoxy coating, and a two-stage powder coat. This provides superior corrosion resistance and a professional appearance that lasts.

• Part Number: RC0006RZ-26
• Diameter: 26mm
• Position: Rear
• Adjustment: 2-Position (30-50% rate increase over OE)
• Material: High-strength spring steel
• Finish: Four-step zinc and powder coat process
• Installation: Bolts to factory mounting points

Fits select 2008-2017 Chevrolet Caprice PPV and 2008-2009 Pontiac G8 (Base, GT, GXP).

The SuperPro Front 30mm 4-Position Adjustable Sway Bar Kit is engineered to transform the handling characteristics of your vehicle by significantly reducing body roll and maintaining maximum tire contact during cornering. Constructed from race-spec chromoly with a progressive design, this sway bar is 30% lighter than traditional alternatives, reducing unsprung weight for better suspension response. The 4-position adjustability allows drivers to fine-tune the handling balance using common hand tools, making it ideal for both daily driving and track use.

To ensure long-term durability, SuperPro utilizes a four-step finishing process including a zinc treatment, epoxy coating, and a two-stage powder coat to resist corrosion in harsh environments. Designed and tested in Australia, this kit bolts directly to factory locations for a precise fit.

• Manufacturer Part Number: RC0001FZ-30
• Diameter: 30mm
• Adjustment: 4-Position adjustable
• Material: Race-spec Chromoly
• Finish: Zinc treated, epoxy coated, and two-stage powder coated
• Weight: 30% lighter than standard solid bars
• Origin: Designed, tested, and made in Australia
• Includes: Sway bar and necessary bushings/hardware

Fits select 1996-2010 Ford Ranger, Explorer, Explorer Sport, and Explorer Sport Trac models equipped with a 4-inch suspension lift.

Maintain proper suspension geometry and predictable handling on your lifted Ford with these Superlift front sway bar links. When installing a 4-inch lift kit, the factory sway bar links are typically too short, causing the sway bar to sit at an aggressive angle that can bind or limit articulation. These extended links restore the sway bar to its optimal operating position, reducing body roll and improving overall stability on and off-road.

Designed for durability and precise fitment, these links are engineered by truck enthusiasts to ensure your suspension performs as intended. The kit comes complete with high-quality bushings and sleeves to replace worn OE components during installation.

• Specifically designed for vehicles with a 4-inch lift kit
• Restores correct sway bar alignment and operating angles
• Improves vehicle stability and reduces suspension binding
• Includes pair of front sway bar links, bushings, and sleeves
• Complete with all necessary mounting hardware
• Manufacturer Part Number: 30-9630

Fits 1986-1992 Toyota Supra Base and Turbo models.

The ST Anti-Swaybar Set (MPN: 52215) is engineered to significantly improve the handling and driving dynamics of your Toyota Supra. By upgrading the factory anti-sway bars, you reduce the amount of body roll and minimize the wheel load differential between the outer and inner wheels during cornering. This results in improved lateral stability, more predictable handling, and increased cornering grip.

Every ST anti-sway bar is manufactured from cold-formed, heavy-duty aircraft steel. The material undergoes a specialized quenching and tempering process to ensure high-strength performance and long-term durability. A final epoxy coating provides a rugged barrier against extreme weather conditions and road debris to prevent corrosion.

• Reduces body roll and improves traction during high-speed cornering
• Constructed from cold-formed heavy-duty aircraft steel
• Multi-stage quenching and tempering for maximum structural integrity
• Durable epoxy coating resists weather and road salt
• Completes suspension upgrades for better lateral stability
• Manufacturer Part Number: 52215

Fits 1995-1999 Mitsubishi Eclipse and 1996-1998 Eagle Talon (Base, GS, GST, GSX, RS, Spyder, ESi, TSi).

Improve your vehicle's handling and cornering performance with the ST Anti-Swaybar Set. By reducing body roll and minimizing the wheel load differential between the inner and outer tires during rapid load changes, this set provides significantly better traction and more direct steering behavior. These bars are designed to help dial out understeer or oversteer, providing a more balanced chassis and increased lateral stability.

• Manufactured from cold-formed, heavy-duty aircraft-grade spring steel for lasting performance.
• Quenched and tempered through a multi-stage process to ensure material integrity.
• Finished with a durable epoxy powder coating for maximum protection against corrosion and road debris.
• High-quality composite bushings reduce deflection and improve load transfer to the suspension.
• Designed for a precise fit, utilizing factory mounting locations where applicable.
• Made in the USA.
• Manufacturer Part Number: 52212

Fits 1993-1995 Mazda RX-7 Base, R1, R2, and Touring models.

Improve your FD's handling dynamics and steering response with the ST Suspensions Anti-Swaybar Set. By upgrading the factory anti-sway bars, you significantly reduce body roll during rapid load changes and hard cornering. This kit works by reducing the wheel load differential between the outer and inner wheels, providing better traction and more predictable lateral stability.

Each bar is manufactured from cold-formed, heavy-duty aircraft-grade spring steel. To ensure long-term durability, the steel undergoes multiple quenching and tempering processes before receiving a final epoxy powder coating for maximum protection against road debris and corrosion. The included high-quality composite bushings are designed to reduce deflection, ensuring immediate load transfer when you turn the wheel.

• Reduces body roll and improves cornering grip
• Directly replaces factory sway bars for better balance
• Cold-formed aircraft steel construction
• Quenched and tempered for maximum strength
• Durable epoxy coating for weather resistance
• High-quality composite bushings included
• Made in the USA
• Manufacturer Part Number: 52185

Fits 1990-1997 Honda Accord (DX, EX, LX, SE, 10th Anniversary, 25th Anniversary, and Value Package).

Improve the handling dynamics and lateral stability of your chassis with the ST Suspensions Anti-Swaybar Set. Designed to reduce body roll during rapid load changes and hard cornering, these bars minimize the load differential between the inner and outer wheels. This results in more direct steering behavior, increased traction, and a more balanced feel by helpfully dialing out understeer or oversteer characteristics.

Every ST anti-sway bar is manufactured from cold-formed, heavy-duty aircraft-grade spring steel for precision and durability. The steel undergoes multiple quenching and tempering processes before receiving a final epoxy powder coating to resist corrosion from road debris and extreme weather. This kit includes high-quality composite bushings designed to reduce deflection and ensure more efficient load transfer compared to worn or soft OE rubber units.

• Manufactured from high-quality cold-formed spring steel
• Durable epoxy powder coat finish for maximum corrosion resistance
• Reduces body roll and improves cornering grip
• High-quality composite bushings included to reduce deflection
• Designed for a direct fit on 1990-1997 Honda Accord models
• Made in the USA
• Manufacturer Part Number: 52135

Fits select 1979-1983 Nissan 280ZX models, including Base, GL, Turbo, and 2+2 variants.

Improve your vehicle's handling and cornering stability with the ST Anti-Swaybar Set. Designed to reduce body roll during rapid load changes and hard cornering, these bars minimize the load differential between the inner and outer wheels. The result is more direct steering behavior, increased lateral grip, and improved traction when you need it most.

Every ST anti-sway bar is manufactured from cold-formed, heavy-duty aircraft-grade spring steel for long-term durability and consistent performance. The bars undergo a specialized quenching and tempering process before being finished with a final epoxy coating to provide maximum protection against road debris and extreme weather conditions. This set includes high-quality composite bushings designed to reduce deflection and ensure efficient load transfer compared to worn OE rubber components.

• Manufactured from high-quality cold-formed aircraft steel
• Durable epoxy powder coating for corrosion resistance
• High-quality composite bushings reduce deflection
• Improves balance by helping to dial out understeer or oversteer
• Made in the USA
• Manufacturer Part Number: 52105

Fits 1974-1978 Nissan 260Z and 280Z (Base and 2+2 models).

Improve your classic Z-car's handling dynamics with the ST Anti-Swaybar Set. Engineered to reduce body roll and minimize the wheel load differential between the inner and outer tires during cornering, these bars provide significantly better traction and more predictable steering response. This suspension upgrade is essential for dialing out understeer or oversteer, resulting in a more balanced and direct driving feel.

Constructed in the USA from cold-formed, heavy-duty aircraft-grade spring steel, these bars are built for maximum lateral stability. Each component undergoes a rigorous quenching and tempering process, followed by a durable epoxy powder coating to resist corrosion from extreme weather and road debris. The kit includes high-performance composite bushings designed to reduce deflection and ensure efficient load transfer to the chassis.

• Manufactured from cold-formed aircraft spring steel for superior strength
• Reduces body roll and improves lateral stability in hard corners
• Durable epoxy powder coat finish for long-term corrosion resistance
• High-quality composite bushings reduce deflection and improve response
• Helps balance handling by dialing out understeer/oversteer
• Made in the USA
• Manufacturer Part Number: 52100

Fits 1970-1973 Nissan 240Z Base models.

Improve the handling and cornering dynamics of your S30 chassis with the ST Suspensions Anti-Sway Bar Set. By upgrading the factory bars, you significantly reduce body roll and minimize the wheel load differential between the inner and outer tires during hard cornering. This leads to increased traction, more direct steering behavior, and significantly better lateral stability.

Each bar is manufactured in the USA from cold-formed, heavy-duty aircraft-grade spring steel. The material undergoes multiple quenching and tempering processes before receiving a final epoxy coating for superior protection against the elements and road debris. The included high-performance composite bushings reduce deflection, ensuring that suspension loads are transferred efficiently to the chassis rather than absorbed by worn factory rubber.

• Manufactured from high-quality cold-formed aircraft spring steel
• Durable epoxy powder coating for long-lasting corrosion resistance
• High-quality composite bushings reduce deflection and improve load transfer
• Reduces body roll and improves lateral cornering grip
• Directly replaces or upgrades factory anti-sway components
• Made in the USA
• Manufacturer Part Number: 52095

Fits select 1984-1992 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is, and M3 models.

Sharpen the handling of your E30 with the ST Anti-Swaybar Set. By reducing body roll and minimizing the wheel load differential between the inner and outer tires during cornering, these bars significantly increase lateral stability and cornering grip. This set is engineered to provide a more direct steering response and improved traction, helping to dial out understeer or oversteer for a more balanced driving experience.

Each bar is manufactured from cold-formed, heavy-duty aircraft-grade spring steel for maximum rigidity. The bars undergo multiple quenching and tempering processes to ensure long-term durability, followed by a high-quality epoxy powder coating to protect against extreme weather and road debris. The included high-performance composite bushings reduce deflection compared to soft factory rubber, ensuring immediate load transfer.

• Manufactured from high-quality cold-formed spring steel
• Durable epoxy powder coating for corrosion resistance
• High-performance composite bushings included to reduce deflection
• Designed to reduce body roll and improve steering precision
• Increases traction and cornering grip by balancing tire loads
• Made in the USA
• Manufacturer Part Number: 52010

Fits 1995-1999 Dodge Neon ACR, Base, High Line, R/T, and Sport models.

Improve your vehicle's handling and cornering precision with the ST Suspensions Anti-Swaybar Set. By reducing body roll during rapid load changes and hard cornering, this upgrade minimizes the load differential between your inside and outside tires, resulting in significantly better traction and lateral stability. These bars complete any suspension upgrade by providing more direct steering behavior and better overall balance, helping you dial out unwanted understeer or oversteer.

Every ST anti-sway bar is manufactured in the USA using cold-formed, heavy-duty aircraft-grade spring steel. The material undergoes multiple quenching and tempering processes for maximum strength before receiving a final epoxy powder coating to protect against extreme weather and road debris. High-quality composite bushings are included to reduce deflection and ensure efficient load transfer to the chassis.

• Manufactured from heavy-duty spring steel for increased torsional rigidity
• Durable epoxy powder coating for superior corrosion resistance
• High-quality composite bushings reduce deflection for sharper response
• Improved traction and reduced body roll during aggressive driving
• Made in the USA
• Manufacturer Part Number: 52002

This Part Fits:

Fits 1966-1976 BMW 2002 (Base, Cabriolet, and Turbo).

The ST Suspensions Anti-Swaybar Set is designed to significantly improve the handling dynamics of the classic BMW 02 series by reducing body roll and stabilizing the chassis during rapid load changes. By minimizing the wheel load differential between the inner and outer tires in a curve, this kit ensures better traction and more predictable cornering grip. Each bar is manufactured from cold-formed, heavy-duty aircraft spring steel to maintain its rate and structural integrity under high stress.

To ensure long-term durability in all driving conditions, these bars undergo multiple quenching and tempering processes before receiving a final epoxy powder coating for superior resistance to road debris and corrosion. The kit includes high-performance composite bushings that reduce deflection compared to factory rubber, resulting in faster load transfer and more direct steering behavior.

• Manufactured from cold-formed, heavy-duty aircraft spring steel
• Reduces body roll and improves lateral stability for better traction
• Multiple quenching and tempering stages for maximum durability
• Protective epoxy powder coating resists weather and road debris
• High-quality composite bushings reduce deflection and improve response
• Made in the USA
• Manufacturer Part Number: 52000

Fits select 2012-2019 Fiat 500 models, including Pop, Sport, Turbo, Lounge, and 500e electric (All Submodels).

The ST Rear Anti-Sway Bar (MPN 51600) is engineered to significantly reduce body roll and improve the handling dynamics of your Fiat 500. By minimizing the wheel load differential between the inner and outer tires during hard cornering, this upgrade provides more direct steering behavior and increased traction. It is the ideal solution for dialing out understeer and balancing the vehicle's lateral stability during rapid load changes.

Constructed from cold-formed, heavy-duty aircraft spring steel, each bar undergoes a rigorous manufacturing process including multiple quenching and tempering cycles. To ensure a long-lasting finish, the bar is treated with a final epoxy powder coating that resists corrosion and road debris. This kit also features high-quality composite bushings designed to reduce deflection and maximize load transfer efficiency compared to soft factory bushings.

• Manufactured from high-quality cold-formed spring steel
• Reduces body roll and increases cornering grip
• Includes high-quality composite bushings for reduced deflection
• Durable epoxy powder coat finish for superior protection
• Improves steering response and vehicle balance
• Made in the USA
• Manufacturer Part Number: 51600

Fits select 1992-2001 Honda Prelude models (S, Si, SE, VTEC, Base, and Type SH). This sway bar is not compatible with models equipped with 4-wheel steering.

Improve the handling and lateral stability of your Honda Prelude with the ST Rear Anti-Sway Bar. Engineered to reduce body roll and manage wheel load differentials during hard cornering, this upgrade increases traction and provides more direct steering feedback. By stiffening the rear suspension, it helps dial out understeer, allowing for a more neutral and balanced chassis through rapid load changes.

Every ST anti-sway bar is manufactured from cold-formed, heavy-duty aircraft-grade spring steel for consistent performance and durability. The bars undergo a multiple-stage quenching and tempering process before being finished with a high-durability epoxy powder coating to resist road debris and extreme weather conditions. This kit includes high-quality composite bushings designed to reduce deflection and ensure efficient load transfer to the suspension system.

• Replaces or upgrades factory rear sway bar to reduce body roll
• Manufactured from cold-formed heavy-duty spring steel
• High-durability epoxy powder coat finish
• Includes high-quality composite bushings
• Designed and manufactured in the USA
• Manufacturer Part Number: 51170

Fits select 1992-2001 Honda Civic (CX, DX, EX, LX, Si, VX), Civic del Sol (S, Si, VTEC), and Acura Integra (GS, GS-R, LS, RS, Special Edition).

Improve your vehicle's handling and steering precision with the ST Front Anti-Swaybar. This suspension upgrade is engineered to significantly reduce body roll during rapid load changes and hard cornering. By decreasing the wheel load differential between the inner and outer tires, this bar increases overall lateral stability and traction, allowing for flatter, more predictable cornering.

• Manufactured from cold-formed, heavy-duty aircraft steel for maximum torsional strength
• Multiple quenching and tempering processes ensure long-term durability under stress
• Finished with a high-durability epoxy powder coating to resist corrosion and road debris
• High-quality composite bushings included to reduce deflection and improve load transfer
• Designed to dial out understeer and provide more direct steering behavior
• Made in the USA
• Manufacturer Part Number: 50157

Fits select 1961-2006 Chevrolet, GMC, and Dodge K10, K20, K30, K1500, K2500, K3500, Silverado, and Ram 4WD trucks and SUVs.

Installing a suspension lift increases the distance between your vehicle's frame and axles, which can pull the factory sway bar out of its ideal operating angle. The Skyjacker SBL40 sway bar relocation brackets are engineered to lower the sway bar mounting points, restoring proper suspension geometry and preventing end link binding or interference on lifted applications.

• Manufactured from heavy-duty steel for maximum structural integrity
• Restores proper sway bar alignment to maintain handling and stability
• Designed specifically for vehicles equipped with suspension lift kits
• Includes all necessary high-grade mounting hardware for a complete installation
• Direct-fit relocation for factory sway bar mounting points
• Manufacturer Part Number: SBL40

Fits select 1960-2006 Chevrolet, Dodge, Ford, GMC, and Jeep models equipped with a suspension lift.

The Skyjacker Sway Bar Lowering Kit is engineered to restore proper sway bar geometry on vehicles with aftermarket suspension lifts. When a vehicle is lifted, the increased distance between the frame and the axle often pulls the factory sway bar out of its optimal operating angle, which can lead to binding or reduced handling performance. These relocation brackets drop the mounting points to realign the sway bar, ensuring it maintains effective control over body roll.

• Durable Construction: Manufactured from high-strength steel to withstand the stresses of lifted suspension travel.
• Geometry Correction: Re-centers the factory sway bar to function correctly within its intended range of motion.
• Complete Hardware: Includes all necessary mounting hardware for a secure installation to factory points.
• Manufacturer Part Number: SBL20
• Warranty: Limited Lifetime Warranty

Fits select 1987-1997 Ford Bronco II, Explorer, Ranger, and Mazda Navajo 4WD models.

When you lift your 4WD vehicle, the factory sway bar geometry is compromised, often leading to binding or poor handling characteristics. These Skyjacker SBE734 extended sway bar end links are engineered to correct the sway bar angle on lifted applications. By restoring the proper orientation, these links help maintain correct suspension geometry throughout the full range of travel, ensuring your vehicle handles predictably both on and off the road.

Built for durability in demanding environments, these end links utilize high-quality materials and include resilient polyurethane bushings. Polyurethane is preferred over factory rubber for its ability to resist degradation from oils and road grime while providing firmer, more consistent performance during articulation.

• Corrects sway bar operating angle on lifted 4WD vehicles
• Improves suspension articulation and handling
• Durable polyurethane bushings for maximum service life
• Manufacturer Part Number: SBE734
• Limited Lifetime Warranty

Fits 2007-2014 Toyota FJ Cruiser (Base, Trail Teams Special Edition, and TRD Special Edition).

Correct your suspension geometry and restore sway bar alignment after installing a lift kit with Skyjacker extended sway bar end links. These links are engineered specifically for 4WD applications to accommodate increased suspension travel and articulation. By resetting the sway bar to its optimal operating angle, these components help prevent binding and maintain predictable handling characteristics on and off the trail.

• Specifically designed for lifted 2007-2014 Toyota FJ Cruiser 4WD models
• Corrects sway bar operating angle to accommodate increased ride height
• Equipped with durable polyurethane bushings for maximum service life and resistance to debris
• Allows for improved articulation during off-road maneuvers
• Direct replacement for factory links in lifted applications
• Manufacturer Part Number: SBE702
• Limited Lifetime Warranty

Fits 1987-1990 Ford Bronco II and 1987-1997 Ford Ranger 4WD models.

Correct your suspension geometry after installing a lift kit with Skyjacker SBE638 extended sway bar end links. When a vehicle is lifted, the factory-length links often pull the sway bar out of its optimal operating angle, which can bind the suspension and limit articulation. These extended links restore the proper sway bar alignment, ensuring your suspension performs correctly throughout its full range of travel.

Designed specifically for 4x4 applications, these links are manufactured from high-quality materials to withstand the rigors of off-road use. They come equipped with durable polyurethane bushings, which provide a more stable connection than factory rubber and offer superior resistance to environmental contaminants like oil and road salt. This kit is a vital upgrade for maintaining roll control and maximizing articulation on your lifted Ford truck.

• Corrects sway bar angle on lifted 4WD vehicles
• Includes high-performance polyurethane bushings for maximum durability
• Improves suspension articulation and handling geometry
• Manufacturer Part Number: SBE638
• Backed by a Limited Lifetime Warranty

Fits 2005 Ford F-250 Super Duty 4WD (XL, XLT, Lariat, King Ranch, and Harley-Davidson Edition).

Restore proper suspension geometry on your lifted Super Duty with Skyjacker SBE5954 extended sway bar end links. Lifting a truck often leaves the factory sway bar at an improper angle, which can limit articulation and lead to unpredictable handling. These extended links are specifically engineered to correct that angle, ensuring the sway bar functions correctly through the full range of suspension travel on 4WD applications.

• Corrects sway bar operating angle on lifted vehicles
• Equipped with durable polyurethane bushings for long-lasting performance
• Engineered for improved suspension articulation and stability
• Robust construction to withstand off-road use
• Manufacturer Part Number: SBE5954
• Limited Lifetime Warranty

Fits 2008-2011 Ford F-250 Super Duty trucks including XL, XLT, Cabela's, FX4, Harley-Davidson, King Ranch, and Lariat submodels.

Skyjacker Sway Bar End Links are engineered to correct sway bar geometry, providing maximum anti-roll and sway control for improved handling on both paved roads and off-road trails. These links are designed to drop your sway bar to the optimal position, restoring the stability lost when altering ride height or replacing worn factory components.

Constructed from high-strength 4140H steel, these end links feature a durable zinc coating to resist rust, corrosion, and oxidation in harsh environments. To ensure long-term performance and reduced deflection, Skyjacker includes premium polyurethane bushings to replace soft or deteriorated factory rubber. Installation is straightforward as these are direct-fit replacements for stock links, though minor drilling may be required on some vehicle configurations.

• Manufacturer Part Number: SBE5086
• Material: 4140H Steel
• Finish: Zinc Plated
• Bushings: Polyurethane
• Warranty: Limited Lifetime Warranty

Fits 2002-2005 Dodge Ram 1500 4WD models (Laramie, SLT, and ST).

Skyjacker SBE5069 extended sway bar end links are engineered to restore proper sway bar alignment on lifted Dodge Ram 1500 4WD trucks. When a suspension lift is installed, factory links often become too short, pulling the sway bar out of its optimal operating angle. These extended replacements correct that geometry to maintain stability and maximize suspension articulation during off-road use.

Constructed for durability in demanding environments, these links utilize high-density polyurethane bushings. Unlike standard rubber, these bushings resist deformation and weathering, ensuring consistent performance and a more responsive feel through the chassis.

• Replaces factory links to accommodate suspension lift heights
• Corrects sway bar operating angle for improved articulation
• High-performance polyurethane bushings for maximum durability
• Engineered specifically for 4-wheel drive applications
• Manufacturer Part Number: SBE5069
• Limited Lifetime Warranty

Fits 2000-2004 Ford Excursion, F-250 Super Duty, and F-350 Super Duty 4WD models.

When you lift your Ford truck or SUV, the factory sway bar end links are often too short, pulling the sway bar out of its ideal operating angle. These Skyjacker extended sway bar end links are engineered to restore proper suspension geometry on lifted 4x4 applications, ensuring the sway bar can effectively control body roll throughout the entire range of suspension travel. These links provide the necessary clearance for increased articulation during off-road use while maintaining predictable handling on the pavement.

• Manufactured for 4WD Ford heavy-duty trucks and Excursions with suspension lifts
• Includes durable polyurethane bushings for improved response and long-term service life
• Corrects sway bar operating angle to prevent binding and improve handling
• Built with high-strength materials to withstand the rigors of off-road use
• Manufacturer Part Number: SBE408
• Limited Lifetime Warranty

Fits 2000-2004 Ford F-250 and F-350 Super Duty 4WD models.

Skyjacker extended sway bar end links are engineered to restore proper suspension geometry on lifted 4WD vehicles. When a truck is lifted, the factory sway bar angle is compromised; these extended links correct that alignment to ensure the sway bar functions correctly throughout the full range of suspension travel. Built for durability in demanding off-road conditions, these links provide the extra articulation needed for 4x4 applications while maintaining better control during cornering.

• Corrects sway bar operating angle on lifted Ford Super Duty models
• Equipped with durable polyurethane bushings for improved response and longevity
• Manufactured from high-quality materials for maximum durability
• Designed specifically for 4-wheel drive suspension geometry
• Manufacturer Part Number: SBE407
• Limited Lifetime Warranty