Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
55 products
55 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Vibrant's Spark Plug Boot Insulators offer high temperature protection in an easy slip-on braided fiberglass sleeve that prolong the life of your expensive spark plugs. They require no clearance from hot surfaces and protect up to 1200 deg F (650 deg C). Available in Natural or Black in 3/4" diameter.
Catalog- Offers high temperature protection in an easy slip-on style sleeve that prolongs the life of your expensive spark plugs
- Requires no clearance from hot surfaces and protect up to 1200 deg F (650 deg C)
- Easy Slip On Braided Insulation Sleeves
- Requires No Clearance From Heat Source
- Protect Your Spark Plug Wires
- Protects Up To 1200 deg. F
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Spark Plug Boot Insulators offer high temperature protection in an easy slip-on braided fiberglass sleeve that prolong the life of your expensive spark plugs. They require no clearance from hot surfaces and protect up to 1200 deg F (650 deg C). Available in Natural or Black in 3/4" diameter.
Catalog- Offers high temperature protection in an easy slip-on style sleeve that prolongs the life of your expensive spark plugs
- Requires no clearance from hot surfaces and protect up to 1200 deg F (650 deg C)
- Easy Slip On Braided Insulation Sleeves
- Requires No Clearance From Heat Source
- Protect Your Spark Plug Wires
- Protects Up To 1200 deg. F
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Heat Protect Flexible Sleeves are silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C). The Heat Protect Sleeving is highly flexible and is engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks. It will also contain radiant heat, saving nearby components from heat damage. This sleeving will also resist automotive chemicals and solvents and provide protection from abrasions, punctures and moisture.
Catalog- Silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C)
- Highly flexible sleeves protect hoses, cables and wires from heat, chemicals and solvents
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Heat Protect Flexible Sleeves are silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C). The Heat Protect Sleeving is highly flexible and is engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks. It will also contain radiant heat, saving nearby components from heat damage. This sleeving will also resist automotive chemicals and solvents and provide protection from abrasions, punctures and moisture.
Catalog- Silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C)
- Highly flexible sleeves protect hoses, cables and wires from heat, chemicals and solvents
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Heat Protect Flexible Sleeves are silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C). The Heat Protect Sleeving is highly flexible and is engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks. It will also contain radiant heat, saving nearby components from heat damage. This sleeving will also resist automotive chemicals and solvents and provide protection from abrasions, punctures and moisture.
Catalog- Silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C)
- Highly flexible sleeves protect hoses, cables and wires from heat, chemicals and solvents
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Heat Protect Flexible Sleeves are silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C). The Heat Protect Sleeving is highly flexible and is engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks. It will also contain radiant heat, saving nearby components from heat damage. This sleeving will also resist automotive chemicals and solvents and provide protection from abrasions, punctures and moisture.
Catalog- Silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C)
- Highly flexible sleeves protect hoses, cables and wires from heat, chemicals and solvents
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Heat Protect Flexible Sleeves are silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C). The Heat Protect Sleeving is highly flexible and is engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks. It will also contain radiant heat, saving nearby components from heat damage. This sleeving will also resist automotive chemicals and solvents and provide protection from abrasions, punctures and moisture.
Catalog- Silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C)
- Highly flexible sleeves protect hoses, cables and wires from heat, chemicals and solvents
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Heat Protect Flexible Sleeves are silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C). The Heat Protect Sleeving is highly flexible and is engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks. It will also contain radiant heat, saving nearby components from heat damage. This sleeving will also resist automotive chemicals and solvents and provide protection from abrasions, punctures and moisture.
Catalog- Silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C)
- Highly flexible sleeves protect hoses, cables and wires from heat, chemicals and solvents
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Fiberglass
Vibrant's Heat Protect Flexible Sleeves are silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C). The Heat Protect Sleeving is highly flexible and is engineered to protect hoses, cables and wire harnesses from damage caused by exposure to extreme heat, open flame and weld sparks. It will also contain radiant heat, saving nearby components from heat damage. This sleeving will also resist automotive chemicals and solvents and provide protection from abrasions, punctures and moisture.
Catalog- Silicone wrapped fiberglass sleeves that offer protection from constant temperatures of up to 500 deg F (260 deg C)
- Highly flexible sleeves protect hoses, cables and wires from heat, chemicals and solvents
- Protection From Constant Temps Up To 500 deg.
- 90 Day Limited Warranty
- Fiberglass
$42.00
$729.64
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.625 (5/8) inch x 100 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- Fire Tape Not Included
- Electrical Wiring Etc.
$546.10
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.375 (3/8) inch x 100 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- Fire Tape Not Included
- Electrical Wiring Etc.
$564.02
Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Fireproof
$368.06
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- 5 Popular Diameters To Choose From
$285.71
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- 5 Popular Diameters To Choose From
$212.17
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- 5 Popular Diameters To Choose From
$596.92
$620.21
Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Fireproof
$315.20
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- 5 Popular Diameters To Choose From
$247.40
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 foot lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
- 5 Popular Diameters To Choose From
- Pliable For Tight Bends
- Trim To Desired Length
$261.83
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 1 inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- Fire Tape Not Included
- Electrical Wiring Etc.
$216.21
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.75 (3/4) inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- Fire Tape Not Included
- Electrical Wiring Etc.
$185.63
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.625 (5/8) inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- Fire Tape Not Included
- Electrical Wiring Etc.
$140.68
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Size: 0.375 (3/8) inch x 25 feet Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- Fire Tape Not Included
- Electrical Wiring Etc.
$31.10
Fire Wrap 3000(TM) thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve(TM) but with the convenience of a hook & loop edge closure design. Fire Wrap 3000(TM) provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting. Withstands direct heat up to 500°F Protects against oil, dirt, road grime & other contaminates Pliable enough to shape & fit tightest bends Minimum bulk length available is 3 feet Size: 1 inch ID, cut to desired length
Installation Instructions- Protects Against Oil/Dirt/Road Grime And Other Contaminates
- Pliable Enough To Shape And Fit Tightest Bends
- Withstands Direct Heat Up To 500Degrees F
$91.21
Heat Shroud GOLD(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. High temperature metalized polyimide lamination, bonded to a robust 20oz heat treated glass fiber base material, Heat Shroud GOLD will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes Heat Shroud GOLD the perfect choice to keep critical lines cool and protected. The added convenience of hook & loop closure eliminates the need of removing one end of connected wires, cables and hoses to install. Fits 2 in. to 2-1/2 in. diameter x 36 in. length 20oz. heat treated base glass Metalized polyimide lamination Base glass rated to 1100°F High temperature hook & loop *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Precision-engineered using high-temperature Gold metalized polyamide material bonded to a 20 oz heat treated glass fiber base. Keeps critical lines, hoses, and air intakes cool & protected up to 800F.
- Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects up to 90% of damaging radiant heat.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Slip Design Allows For Installation w/o Removal Of The Line
$36.69
Heat Sheath GOLD(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD(TM) sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F *DO NOT apply directly to exhaust components.
Installation Instructions- Precision-engineered using high-temperature Gold metalized polyamide material bonded to a 20 oz heat treated glass fiber base. Keeps critical lines, hoses, and air intakes cool & protected up to 800F.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects up to 90% of damaging radiant heat.
- Quick, easy installation- unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Tested To ASTM D1120
$30.08
Heat Sheath GOLD(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD(TM) sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F *DO NOT apply directly to exhaust components.
Installation Instructions- Precision-engineered using high-temperature Gold metalized polyamide material bonded to a 20 oz heat treated glass fiber base. Keeps critical lines, hoses, and air intakes cool & protected up to 800F.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects up to 90% of damaging radiant heat.
- Quick, easy installation- unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Tested To ASTM D1119
$41.66
Heat Sheath GOLD(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD(TM) sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F *DO NOT apply directly to exhaust components.
Installation Instructions- Precision-engineered using high-temperature Gold metalized polyamide material bonded to a 20 oz heat treated glass fiber base. Keeps critical lines, hoses, and air intakes cool & protected up to 800F.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects up to 90% of damaging radiant heat.
- Quick, easy installation- unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Tested To ASTM D1118
$33.29
Heat Sheath GOLD(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD(TM) sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F *DO NOT apply directly to exhaust components.
Installation Instructions- Precision-engineered using high-temperature Gold metalized polyamide material bonded to a 20 oz heat treated glass fiber base. Keeps critical lines, hoses, and air intakes cool & protected up to 800F.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects up to 90% of damaging radiant heat.
- Quick, easy installation- unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Tested To ASTM D1117
Showing 30/55
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.