Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
55 products
55 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$238.17
Titanium Protect-A-Boots are the latest in thermal protection technology for spark plug boot protectors. Developed from a unique material mined from lava rock, stranded and woven into a proprietary weave for added durability and strength, yet is pliable enough to provide a universal fit for straight or angled boots. Titanium Protect-A-Boots are naturally resistant to heat, chemicals, abrasions and contaminants, and are engineered to withstand temperatures up to 1800F (983C) of direct heat. High horsepower engine compartments are known for extreme heat that can put spark plug boots and wires at risk. With excessive heat generated from the exhaust manifold and headers the ignition system is vulnerable to the potential of burning, hardening and cracking of ignition wires and boots that could lead to arching, engine misfire and potential ignition system failure. Titanium Protect-A-Boots, with LR technology, are engineered to handle extreme heat, providing the ultimate protection for todays high voltage ignition systems for many applications including automotive, marine and powersports. The color and weave work together to give DEI's Titanium Protect-A-Boots a cool carbon fiber appearance that looks great under the hood - ideal for race, street, show cars and off road vehicles. Ultimate protection for spark plug boots and wires Withstands heat up to 1800F (983C). Titanium Protect-A-Boots solve the problem of burning and cracking plug boots and wires from header and engine heat. Features Made from a high temperature, nonflammable glass fiber material able to withstand temperatures up to 1000F. Boots are of double-wall construction. Advantages Boots & Sleeving provide protection against harmful, high under-hood temperatures. Shrink tubes are included to provide a water-tight seal. Benefits Boots are 6 in. in length with a sewn in ring, and fit wire size up to 8mm. 4 Cylinder Kit Contains 13 ft of line sleeving 12 - Hi-Temp Shrink Tubes 4 - Protect-A-Boots
Installation InstructionsInstallation Instructions
- 25 Feet Of Protect-A-Wire Sleeving
- 25 Hi-Temp Shrink Tubes
- Available In 5 Colors
- 8 Protect-A-Boots
$41.42
RFI Shield reduces Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI) from ignition systems & high voltage wires that can affect computer systems, electronic fuel injection, radios, and other sensitive components. Electronic fuel injection systems thrive in an environment free from RFI. RFI Shield safeguards the delicate electronic components, optimizing fuel delivery and engine performance. Drive with confidence, knowing that your vehicle's critical systems are shielded from interference that can compromise safety and performance.
Installation InstructionsInstallation Instructions
- Non-adhesive tape wraps around wires without having to disconnect wiring.
- Includes DEI Quick Fix Silicone Tape to seal ends.
- Great for bundling wiring larger than 1 diameter.
- Tape comes in 1/2in width and 3ft length.
- A 17.5 grounding strap included.
$16.43
Vapor Block(TM) solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation. Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block(TM). Vapor Block(TM) fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block(TM) installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install. Simply wrap Vapor Block(TM) around the line, remove the adhesive liner and press the adhesive flap into place. Made of glass fiber and polyester laminated to an aluminum outer layer, Vapor Block(TM) offers excellent long lasting thermal protection without paying for expensive repairs or modifications. 5/8 in. (16mm) inside diameter x 36 in. Split design with adhesive flap Use on fuel lines to prevent vapor lock Can be used on any cable, hose or line for added heat protection Easy to cut to size Note: Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Can Be Used On Any Cable/Hose Or Line For Added Heat Protection
- Split Design With Built In Adhesive Flap
- Use On Fuel Lines To Prevent Vapor Lock
- 3/8 in. -10 mm I.D. X 36 in
- Easy To Cut To Size
$156.63
Everything to protect and restore your factory or aftermarket wire harness from abrasion, chemicals and the elements. 5 different diameter Easy Loom sleeves, Shrink tube ends, silicone tape, locking ties, electrical tape, and now includes a small and large line sleeving tool. Self-closing split design with 30% overlap Peak temp rating 347 F - Melting point 500 F Superior in style and function to plastic tubing Protects against abrasion, chemicals and the elements Professional look and added protection Approved by most car manufacturers Kit Includes: 1 - 1 in. x 6 ft Easy Loom 1 - 3/4 in. x 10 ft Easy Loom 1 - 1/2 in. x 30 ft Easy Loom 1 - 5/16 in. x 60 ft Easy Loom 1 - 3/16 in. x 15 ft Easy Loom 1 - 3/8 in. x 2 ft Heat Shrink 1 - 1/4 in. x 1 ft Heat Shrink 1 - 1/2 in. x 1 ft Heat Shrink 40 - 8 in. Ties 100 - 4 in. Ties 1 - 1 in. x 12 ft Silicone Tape 1 - Roll of Electrical Tape Newly added! - 1 large & 1 small line sleeving tool
Installation InstructionsInstallation Instructions
Installation Instructions
- Produced from durable P.E.T monofilament that provides strength, flexibility, and durability while resisting chemicals, UV rays, and moisture
- Peak Temp Rating 347 Degrees F - Melting Point 500 Degrees F
- Resists the majority of chemicals and automotive fluids
- Protects Against Abrasion/Chemicals And The Elements
- Self-Closing Split Design With 30 Percent Overlap
- Superior In Style And Function To Plastic Tubing
- Professional Look And Added Protection
- Approved By Most Car Manufacturers
- Tested to 302°F/150°C
- Self-extinguishing
$33.17
Easy Loom(TM) Split Sleeves are a great solution to cleaning up and protecting old wiring, new wiring, lines hoses and more. Protective Easy Loom offers a clean, classy way to protect exposed wires, cables and hoses on trucks, SUV's and powersport vehicles including ATVs and UTVs. Superior in style and function to simple plastic tubing, DEI's Easy Loom adds a superior level of protection to sensitive wires cables and hoses exposed to abrasion or the elements; all with a clean, classy look. Protects against abrasion, chemicals & the elements Clean, classy way to protect wires, hoses & cables Superior style & function vs. plastic tubing Split design makes installation easy No need to disconnect wires Available in multiple diameters
Installation InstructionsInstallation Instructions
- Produced from durable P.E.T monofilament that provides strength, flexibility, and durability while resisting chemicals, UV rays, and moisture
- Resists the majority of chemicals and automotive fluids
- Protect And Organize Wires/Cables And Hoses
- Easily Removed For Service Or Replacement
- Includes Silicone Tape To Secure Ends
- Add A Clean And Classy Look
- 10mm - 3/8 in. ID x 20 ft
- Tested to 302°F/150°C
- Self-extinguishing
- Made In The USA
$32.39
Black Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat, now in a stylish black finish. DEI's Black Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use.
Installation InstructionsInstallation Instructions
- Protects Plug Wires From Hot Exhaust Manifolds And Headers
- Made From The Same Material As Our Titanium Exhaust Wrap
- Can Withstand Temperatures To 1800 Degrees
- Chemical And Abrasion Resistant
- Includes Heat Shrink Ends
- Rich Black Color
$19.94
Black Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat, now in a stylish black finish. DEI's Black Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use.
Installation InstructionsInstallation Instructions
- Protects Plug Wires From Hot Exhaust Manifolds And Headers
- Made From The Same Material As Our Titanium Exhaust Wrap
- Can Withstand Temperatures To 1800 Degrees
- Chemical And Abrasion Resistant
$38.81
Black Titanium(TM) Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat, now in a stylish black finish. DEI's Black Titanium Protect-A-Sleeve with LR Technology(TM) offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use.
Installation InstructionsInstallation Instructions
- Protects Plug Wires From Hot Exhaust Manifolds And Headers
- Made From The Same Material As Our Titanium Exhaust Wrap
- Can Withstand Temperatures To 1800 Degrees
- Chemical And Abrasion Resistant
$55.32
Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- 2-1/2 in. x 3 ft.
$97.25
Cool Cover GOLD(TM) solves the problem of heat soak into air tubes and cold air intakes. High temperature metalized polyimide lamination, bonded to a robust 20 oz. heat treated glass fiber base material, Cool Cover GOLD(TM) will reflect radiant heat from air tubes and promotes cooler, denser, more powerful air charge. With a unique full length hook & loop closure design, Cool Cover GOLD can be removed in seconds. Reflects heat from air tubes Promotes cooler air charge for added power Installs & removes in seconds for show or go Hook & Loop fastening system for easy installation Fits up to 4 in. diameter tubing Up to 4 in. O.D. x 28 in. L
Installation Instructions- Hook And Loop Fastening System For Easy Installation
- Installs And Removes In Seconds For Show Or Go
- Promotes Cooler Air Charge For Added Power
- 21Oz Heat Treated Weave Lock Glass Fiber
- Reflects Heat Up To 800 Degrees F
- Tested To FSTM 191.5100 Standards
- Fits Up To 4 in. Diameter Tubing
- Tested To ASTM D1117 Standards
- Measures 4 in. O.D. X 28 in. L
$95.16
Fire Wrap 3000(TM) thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve(TM) but with the convenience of a hook & loop edge closure design. Fire Wrap 3000(TM) provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting. Withstands direct heat up to 500°F Protects against oil, dirt, road grime & other contaminates Pliable enough to shape & fit tightest bends Size: 1.5 (1-1/2) inch ID x 24 inches
Installation Instructions- Protects Against Oil/Dirt/Road Grime And Other Contaminates
- Hook And Loop Fastening System For Easy Installation
- Pliable Enough To Shape And Fit Tightest Bends
- Withstands Direct Heat Up To 500 Degrees F
- 1-1/2 in. ID x 2 ft.
$75.39
Fire Wrap 3000(TM) thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve(TM) but with the convenience of a hook & loop edge closure design. Fire Wrap 3000(TM) provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting. Withstands direct heat up to 500°F Protects against oil, dirt, road grime & other contaminates Pliable enough to shape & fit tightest bends Various diameter sizes available as special order Note: Each size is available in 2 foot, pre-cut sections, or continuous bulk lengths up to 300 ft (one foot increments only). For example, to get a 5 foot length, order a quantity of 5 bulk feet.
Installation Instructions- Protects Against Oil/Dirt/Road Grime And Other Contaminates
- Hook And Loop Fastening System For Easy Installation
- Pliable Enough To Shape And Fit Tightest Bends
- Withstands Direct Heat Up To 500 Degrees F
- 1 in. ID x 2 ft.
$69.47
Fire Wrap 3000(TM) thermal insulator sleeve is constructed from the same material as DEI Fire Sleeve(TM) but with the convenience of a hook & loop edge closure design. Fire Wrap 3000(TM) provides the same top quality heat insulation and protection yet offers the added convenience of easy installation by simply wrapping around wires, cables or hoses without the need of disconnecting. Withstands direct heat up to 500°F Protects against oil, dirt, road grime & other contaminates Pliable enough to shape & fit tightest bends Various diameter sizes available as special order Note: Each size is available in 2 foot, pre-cut sections, or continuous bulk lengths up to 300 ft (one foot increments only). For example, to get a 5 foot length, order a quantity of 5 bulk feet.
Installation Instructions- Protects Against Oil/Dirt/Road Grime And Other Contaminates
- Hook And Loop Fastening System For Easy Installation
- Pliable Enough To Shape And Fit Tightest Bends
- Withstands Direct Heat Up To 500 Degrees F
- 5/8 in. Id X 2 ft.
$47.97
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 1 inch x 36 inches Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Use For Bundling And Protecting Hoses/Electrical Wiring etc.
- Insulates Wiring/Hoses/Oil/Brake/Transmission Lines And More
- Burn Protection During Under Hood Repairs And Maintenance
- Includes 16 In. Length Of Fire Tape
- 1 in. x 3 ft Length Of Fire Sleeve
$34.55
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.75 (3/4) inch x 36 inches Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Use For Bundling And Protecting Hoses/Electrical Wiring etc.
- Insulates Wiring/Hoses/Oil/Brake/Transmission Lines And More
- Burn Protection During Under Hood Repairs And Maintenance
- 3/4 in. x 3 ft Length Of Fire Sleeve
- Includes 16 In. Length Of Fire Tape
$33.56
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.625 (5/8) inch x 36 inches Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Use For Bundling And Protecting Hoses/Electrical Wiring etc.
- Insulates Wiring/Hoses/Oil/Brake/Transmission Lines And More
- Burn Protection During Under Hood Repairs And Maintenance
- 5/8 in. x 3 ft Length Of Fire Sleeve
- Includes 16 In. Length Of Fire Tape
$26.85
Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.375 (3/8) inch x 36 inches Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 0.125 in. (1/8 in.) 5/16 24 SAE 3 0.1875 (3/16 in.) 3/8 24 SAE 4 0.25 (1/4 in.) 7/16 20 SAE 5 0.3125 (5/16 in.) 3/8 18 SAE 6 0.375 (3/8 in.) 9/16 18 SAE 8 0.5 (1/2 in.) 3/4 16 SAE 10 0.625 (5/8 in.) 7/8 14 SAE 12 0.75 (3/4 in.) 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1.25 (1-1/4 in.) 1-5/8 12 SAE 24 1.5 (1-1/2 in.) 1-7/8 12 SAE 28 1.75 (1-3/4 in.) 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines.
Installation Instructions- Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
- Insulates Wiring/Hoses/Oil/Brake / Transmission Lines And More
- Use For Bundling And Protecting Hoses; Electrical Wiring Etc.
- Burn Protection During Under Hood Repairs And Maintenance
- Use For Bundling And Protecting Hoses
- 3/8 in. x 3 ft Length Of Fire Sleeve
- Includes 16 in Length Of Fire Tape
- Electrical Wiring Etc.
$60.10
Heat Shroud GOLD(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. High temperature Metalized Polyimide lamination, bonded to a robust 20oz heat treated glass fiber base material, Heat Shroud GOLD will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes Heat Shroud GOLD the perfect choice to keep critical lines cool and protected. The added convenience of hook & loop closure eliminates the need of removing one end of connected wires, cables and hoses to install. Fits 0.5 in. to 1.25 in. diameter x 36 in. length 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F High temperature hook & loop *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Precision-engineered using high-temperature Gold metalized polyamide material bonded to a 20 oz heat treated glass fiber base. Keeps critical lines, hoses, and air intakes cool & protected up to 800F.
- Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects up to 90% of damaging radiant heat.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Metalized Polyimide Lamination
$37.23
Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- 3/4 in. X 3 ft.
$28.23
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
- Pliable For Tight Bends
- Trim To Desired Length
$22.47
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Trim To Desired Length
$16.97
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Trim To Desired Length
$45.07
Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.
Installation InstructionsInstallation Instructions
- Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- 1 in. X 3 ft.
$24.25
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Trim To Desired Length
$18.70
Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.
Installation Instructions- Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
- Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
- Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
- Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
- Proudly manufactured in the USA with a focus on quality and craftsmanship.
- Trim To Desired Length
Showing 55/55
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.