Ensure you can safely remove and install your wheels with this genuine Project Kics replacement lock key. This spare key is specifically designed for the Project Kics R40 and R26 series racing lug nut sets, providing a precise interface for the unique internal-drive locking nuts.

• Fits Project Kics Leggdura Racing R40 and R26 series lug nuts
• Key Number Identification: #15 (num15)
• Genuine Project Kics replacement hardware
• Durable construction for high-torque applications
• Manufacturer Part Number: W315SLK (Ref: K-42815)

If you have lost or damaged your original socket, this exact replacement restores the ability to service your vehicle without risking damage to the lug nuts or the wheel finish. Always verify your key pattern number (stamped on the original key or the packaging code) matches #15 before ordering.

Borne Off-Road wheel spacers are designed to widen your vehicle's track width, providing increased stability and the necessary clearance for larger aftermarket tires or high-offset wheels. These 50mm spacers help eliminate tire rub against suspension components and frame rails during full-lock turns, allowing for a more aggressive stance without sacrificing drivability.

Precision-engineered with a 95.1mm hub-centric bore, these spacers ensure a centered, vibration-free fitment by properly seating on the vehicle's hub. Each spacer is finished in a durable black coating to resist corrosion and includes pre-installed M14 studs for a straightforward installation onto the factory hub.

• Bolt Pattern: 6x139.7
• Thickness: 50mm
• Hub Bore: 95.1mm
• Stud Thread: M14
• Finish: Black
• Includes: Hub-centric wheel spacers with pre-installed studs

Borne Off-Road wheel spacers provide the necessary clearance to accommodate larger tires and prevent rubbing on suspension components or brake calipers. By widening the track width by 25mm, these spacers increase the vehicle's footprint for improved lateral stability and a more aggressive, flush stance. The precision-machined 95.1mm bore ensures a proper fit against the hub, maintaining wheel balance and reducing vibration during high-speed operation.

• Thickness: 25mm
• Bolt Pattern: 6x139.7
• Hub Bore: 95.1mm
• Hardware Thread: M14
• Finish: Black Anodized
• Application: Wheel-to-hub spacing for increased clearance and stability

Wheel Mate Muteki SR48 lug nuts are engineered for performance-driven enthusiasts who require durability and ease of use. These open-ended lug nuts are specifically designed to accommodate extended wheel studs, making them an ideal choice for track-focused vehicles and specialized wheel setups where stud length exceeds standard nut depths.

• Series: Muteki SR48
• Thread Pitch: 12x1.50
• Total Length: 48mm
• Design: Open End for extended studs
• Color/Finish: Black
• Seat Type: 60-degree taper (tuner style)
• Manufacturer Part Number: 32906B

The 48mm length provides ample surface area for socket engagement, while the knurled perimeter offers a superior grip for hand-threading during quick wheel changes. These nuts are built to withstand the rigors of frequent removal and installation common in performance driving environments.

Fits select 1986-2015 Mazda, Mitsubishi, Dodge, Eagle, and Plymouth models including RX-7, RX-8, Miata, Lancer Evolution, and Eclipse.

Achieve the perfect stance and improve vehicle stability with these ISC Suspension hub-centric wheel spacers. By pushing your wheels out 15mm, these spacers provide the necessary clearance for larger aftermarket brake kits or wider tire setups while narrowing the gap between the tire and the fender for a more aggressive look. The hub-centric design ensures the wheel load is properly centered on the hub rather than the studs alone, eliminating the vibrations often associated with low-quality, lug-centric alternatives.

• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Hub Bore: 67mm
• Finish: Black
• Quantity: Pair (2 Spacers)
• Manufacturer Part Number: WSMM15B

Secure your wheels with the strength and precision of BLOX Racing Street Series forged lug nuts. These 12x1.5mm lug nuts are forged for enhanced durability compared to standard cast hardware, making them a reliable choice for street-driven vehicles. Whether you are replacing worn factory nuts or installing aftermarket wheels, this complete set ensures consistent torque and a secure fit across all wheel studs.

• Thread Pitch: 12x1.5mm
• Construction: Forged for high strength and durability
• Product Line: Street Series
• Quantity: Full set of 20 lug nuts
• Manufacturer Part Number: BXAC-00104-SSSI

BLOX Racing Street Series forged lug nuts provide a high-strength, lightweight solution for securing your aftermarket wheels. Manufactured through a precision forging process, these lug nuts offer superior structural integrity and durability compared to standard cast hardware, ensuring they can withstand the rigors of spirited driving and frequent wheel removal.

• Thread Pitch: 12x1.5mm
• Quantity: Set of 16 lug nuts
• Construction: High-strength forged material for maximum durability
• Series: Street Series
• Manufacturer Part Number: BXAC-00103-SSSI

Designed for enthusiasts who prioritize both performance and reliability, these fasteners provide a secure seat and clean aesthetic. The forged construction reduces rotating mass while maintaining the thread strength necessary for safe operation. Always verify your vehicle's thread pitch and wheel seat type before installation to ensure a proper match with this 12x1.5mm set.

Fits select 2014-2026 BMW (2/3/4/5/6/7/8 Series, X1-X7, Z4, M models, i-series), Mini (Cooper, Clubman, Countryman), and Toyota GR Supra.

Dinan wheel spacers widen your vehicle's track to improve both handling stability and aesthetic stance. These 12mm spacers are precision CNC-machined from high-grade aluminum to ensure exact tolerances and a perfect fit. Each spacer is finished in a durable black anodized coating to resist corrosion and blend seamlessly with your wheel hub assembly. The hub-centric design includes integrated rings to maintain centered alignment, preventing the steering wheel vibration often associated with generic spacers.

Widening the track allows for increased clearance between wheels and suspension or brake components, making these an essential tool for fine-tuning wheel fitment. Note: Installation requires longer wheel bolts, which are sold separately. Please verify your specific thread pitch and seat type before ordering hardware.

• Manufacturer Part Number: D210-2028
• Thickness: 12mm
• Bolt Pattern: 5x112
• Center Bore: 66.5mm
• Construction: CNC-machined aluminum
• Finish: Anodized black
• Quantity: Set of 2 spacers
• Design: Weight-saving hub-centric configuration

Finish your wheel assembly with a genuine Weld Drag Sport Forged (DFS) series center cap. This replacement cap is designed to protect the hub and spindle while completing the high-end look of your 5-lug drag wheels. Precision-machined to match the tolerances of your Weld wheels, it ensures a secure fit that won't vibrate loose during high-speed passes.

• Manufacturer Part Number: P605-5083
• Series: Drag Sport Forged (DFS)
• Finish: Polished
• Outer Diameter: 3.16 inches
• Height: 3.20 inches
• Lug Pattern Compatibility: 5-Lug

Constructed from high-quality materials to resist corrosion and maintain its polished luster, this cap is an essential component for both street and strip applications where aesthetics and hub protection are equally important.

Fits 2015-2019 BMW M3 and M4 (F80/F82/F83).

This H&R wheel spacer and bolt kit is engineered to widen the track width of your F8X BMW, providing a flush aesthetic and improved lateral stability. By moving the wheels outward, these spacers help fill the wheel arches and can provide necessary clearance for aftermarket suspension components or oversized brake calipers. The hub-centric design maintains a precise fit on the factory hub to prevent vibration at highway speeds.

• Precision-machined 12mm front and 15mm rear spacers
• Hub-centric fitment ensures perfect wheel centering
• Includes required extended-length wheel bolts for secure mounting
• Manufactured from high-strength, lightweight aluminum/magnesium alloy
• Hard anodized finish for long-term corrosion resistance
• Manufacturer Part Number: SK-011

Fits 2021+ BMW X5M (F95) models.

H&R wheel spacers push your wheels out to be flush with the fender, providing your BMW X5M with a more aggressive stance and improved lateral stability by widening the track. These spacers are engineered with a hub-centric design to ensure they center perfectly on the vehicle hub, maintaining factory-level balance and preventing vibration at high speeds. This complete kit includes the necessary extended lug bolts required to compensate for the additional thickness, ensuring proper thread engagement and safety.

• Spacer Thickness: 12mm
• Hub-centric design for a precise, vibration-free fit
• Improves aesthetic stance and handling characteristics
• Includes a full set of extended lug bolts for secure installation
• Manufacturer Part Number: SK-010

Fits 2021-2025 BMW M3 and M4 (G80/G82/G83) models.

Widen your vehicle's track and achieve a flush, aggressive stance with the H&R 12mm Wheel Spacer & Bolt Kit. These precision-engineered spacers are designed to push the wheels out from the hub, filling the wheel arches and improving lateral stability. This kit is a direct-fit solution for the G8X chassis, providing the necessary clearance for suspension components or larger braking systems while enhancing the overall aesthetic of the vehicle.

• Precision-machined from a proprietary aluminum/magnesium alloy for maximum strength and minimal weight.
• Hubcentric design ensures a perfect fitment to the factory hub, preventing vibration at high speeds.
• Hard-anodized finish provides superior corrosion resistance and durability.
• Includes a full set of high-tensile extended wheel bolts for a safe and secure installation.
• 12mm thickness provides a noticeable increase in track width without sacrificing ride quality.
• Manufacturer Part Number: SK-009.

Fits 2020-2024 BMW X3M (F97).

Eliminate the factory wheel gap and achieve a flush, aggressive stance with this H&R wheel spacer and bolt kit. Specifically measured for the F97 chassis equipped with original equipment wheels, this staggered setup uses 15mm front and 12mm rear spacers to widen the vehicle track. This modification improves lateral stability and cornering performance while providing a more planted, custom aesthetic.

• Front Spacer Thickness: 15mm
• Rear Spacer Thickness: 12mm
• Fitment: Optimized for OE wheel aggressive fitment
• Hardware: Includes required extended lug bolts for secure installation
• Manufacturer Part Number: SK-005

Fits 2020-2024 Toyota Supra.

Achieve a flush, aggressive stance and improved lateral stability with the H&R DR Series Wheel Spacer Kit. Specifically staggered for the A90/A91 Supra platform, this kit provides 13mm spacers for the front axle and 15mm spacers for the rear to correct the factory tucked appearance. By widening the vehicle track, these spacers move the wheels out toward the fender lips, helping to lower the roll center and improve handling through the corners.

H&R spacers are precision-engineered from a proprietary aluminum/magnesium alloy that is significantly lighter and stronger than standard 6061-T6 aluminum. Every spacer is hubcentric, featuring a CNC-machined center bore to ensure a perfect interface between the vehicle hub and the wheel, which eliminates the vibration often associated with universal spacers. This complete kit (SK-001) includes the necessary extended-length lug bolts required to maintain safe and proper thread engagement.

• Precision CNC-machined for vehicle-specific fitment
• DR Series design fits between the wheel and hub
• Staggered 13mm front and 15mm rear widths
• High-strength aluminum/magnesium alloy construction
• Hard anodized finish for durability and corrosion resistance
• Includes a full set of extended lug bolts
• Manufacturer Part Number: SK-001

Designed specifically for 17-inch Dirty Life 9302, 9303, and 9304 series wheels, this matte black race ring allows you to replace damaged hardware or refresh the appearance of your off-road wheel set. Built to withstand the rigors of aggressive trail use, these rings provide the structural integrity and fitment precision required for Dirty Life's specialized wheel designs.

• Finish: Matte Black
• Diameter: 17-inch
• Compatibility: Fits Dirty Life 9302, 9303, and 9304 series wheels
• Application: Replacement or custom race ring for off-road use
• Brand: Dirty Life

Increase your vehicle's track width and improve overall stability with Borne Off-Road 38.1mm wheel spacers. Designed to provide the necessary clearance for wider tires or larger aftermarket wheels, these spacers help eliminate rubbing on suspension components while giving your rig a more aggressive, wider stance.

Precision-engineered to strict tolerances, these spacers feature a 77.8mm center bore to ensure a hub-centric fitment, which is critical for maintaining a vibration-free ride at highway speeds. The durable blue anodized finish provides a layer of corrosion resistance, protecting the surface from the elements during off-road use.

• Thickness: 38.1mm (1.5 inches)
• Bolt Pattern: 6x139.7
• Center Bore: 77.8mm
• Color: Blue Anodized
• Product Series: Borne Off-Road

Borne Off-Road wheel spacers provide the necessary clearance for larger tires and wide-offset wheels, effectively pushing the wheel assembly out 38.1mm from the hub. This increased track width improves vehicle stability and allows for a more aggressive stance without the need for new wheels.

These spacers feature a hub-centric design, ensuring a precise fit that centers the wheel on the hub to minimize vibration and maintain factory-level ride quality. The black finish offers a durable, corrosion-resistant layer suitable for harsh off-road environments.

• Bolt Pattern: 6x139.7
• Center Bore: 77.8mm
• Thickness: 38.1mm
• Finish: Black
• Hub-centric design for precise fitment

Increase your vehicle's track width and improve tire clearance with Borne Off-Road wheel spacers. These 50mm spacers are designed to solve offset issues, allowing for larger wheel and tire combinations without rubbing against suspension components. The hub-centric design with a 77.8mm center bore ensures a precise fit, maintaining ride quality and minimizing high-speed vibration.

• Thickness: 50mm
• Bolt Pattern: 5x139.7
• Center Bore: 77.8mm
• Stud Size: M14
• Finish: Black

Borne Off-Road Wheel Spacers allow you to widen your vehicle's track width, providing increased stability and the clearance needed for larger off-road tires or wider wheels. These spacers are designed with a hub-centric profile to ensure a precise fit against the factory hub, which helps eliminate vibration and maintain original ride quality.

• Thickness: 38mm
• Bolt Pattern: 5x139.7
• Center Bore: 77.8mm
• Stud Thread: M14
• Finish: Black Anodized

Engineered for durability in demanding environments, these spacers feature high-strength studs and a corrosion-resistant black finish. They provide a straightforward solution for correcting offset when installing aftermarket wheels or simply achieving a more aggressive, flush stance on your rig.

Borne Off-Road wheel spacers provide the additional clearance required for wider tires and offset wheels while widening your vehicle's track for improved stability and a more aggressive stance. These precision-engineered spacers are designed to handle the rigors of off-road use, ensuring a secure, hub-centric fit between the vehicle hub and the wheel.

• Thickness: 25mm
• Bolt Pattern: 5x139.7
• Center Bore: 77.8mm
• Stud Size: M14
• Finish: Durable black coating for corrosion resistance
• Configuration: Precision-machined for hub-centric fitment

Widen your vehicle's track and clear larger tires with Borne Off-Road 50mm wheel spacers. These spacers provide a significant 50mm increase in track width per side, allowing for improved stability and the necessary offset to prevent oversized tires from rubbing on suspension components. Designed for a precise 77.8mm center bore, these spacers ensure a hub-centric fit that centers the load on the hub rather than the studs alone, effectively eliminating high-speed vibrations.

• Thickness: 50mm
• Bolt Pattern: 5x139.7
• Center Bore: 77.8mm (Hub-Centric)
• Thread Pitch: 9/16" pre-installed studs
• Finish: Durable black coating for long-term corrosion resistance
• Included: Sold as a pair with pre-pressed studs

Borne Off-Road Wheel Spacers provide the additional clearance and wider stance required for aggressive tire setups and off-road builds. These 38mm spacers increase your vehicle's track width, which helps prevent oversized tires from rubbing against frame rails or suspension components during articulation and tight turns.

• Thickness: 38mm
• Bolt Pattern: 5x139.7mm
• Center Bore: 77.8mm
• Stud Size: 9/16
• Finish: Black

Each spacer is designed for precise fitment and durability in demanding environments. The hub-centric design ensures a centered fit on the hub to minimize vibration, while the pre-installed 9/16 studs allow for a straightforward installation to factory mounting points.

Borne Off-Road Wheel Spacers provide a wider track width to improve vehicle stability and create the necessary clearance for larger tires or high-offset aftermarket wheels. These 25mm spacers are engineered with a hub-centric design, featuring a 77.8mm center bore that ensures the wheel is perfectly centered on the hub to prevent vibration and maintain factory-like ride quality.

Finished in a durable black coating for corrosion resistance, these spacers come equipped with pre-installed 9/16 studs for a secure fitment. By pushing the wheel further from the hub, they help eliminate rubbing against suspension components or inner wheel wells, making them an essential upgrade for off-road builds using oversized rubber.

• Bolt Pattern: 5x139.7
• Thickness: 25mm
• Center Bore: 77.8mm
• Thread Pitch: 9/16
• Color/Finish: Black
• Hub-centric design for vibration-free operation

Borne Off-Road wheel spacers provide the necessary clearance to run wider tires or offset wheels while broadening your vehicle's track for improved stability and a more aggressive stance. These 50mm spacers are engineered with a hub-centric design to ensure a precise fit against the hub, significantly reducing the risk of steering wheel vibration compared to generic lug-centric spacers.

• Thickness: 50mm
• Bolt Pattern: 5x139.7
• Center Bore: 77.8mm
• Thread Pitch: 1/2"-20 studs and nuts included
• Finish: Durable black anodized coating for superior corrosion resistance
• Precision-machined construction for high-strength durability on and off-road
• Sold as a pair or set (refer to packaging) to ensure uniform axle spacing

Improve your vehicle's stance and tire clearance with Borne Off-Road wheel spacers. These 38mm spacers widen the track width, providing the necessary offset to run larger tires or clear aftermarket suspension components without frame or control arm interference.

Precision-engineered for off-road durability, these spacers feature a hub-centric design with a 77.8mm center bore. This ensures the wheel load is supported by the hub rather than the studs alone, significantly reducing vibration and maintaining structural integrity during heavy use. The black anodized finish provides a clean look and superior corrosion resistance.

• Bolt Pattern: 5x139.7
• Thickness: 38mm
• Center Bore: 77.8mm
• Hardware: 1/2-inch studs
• Configuration: Hub-centric for vibration-free fitment
• Finish: Black

Borne Off-Road wheel spacers provide the necessary clearance for larger tires and aftermarket wheels while widening your vehicle's track for improved off-road stability. These hub-centric spacers are engineered to provide a precise fit, centering the wheel directly onto the hub to eliminate vibration and ensure a smooth ride.

Constructed with high-strength hardware, these spacers include pre-installed 1/2"-20 studs to maintain drivetrain integrity under load. The durable black finish provides excellent corrosion resistance, making them ideal for rigs exposed to harsh environments, mud, and trail debris.

• Bolt Pattern: 5x139.7mm
• Thickness: 25mm
• Center Bore: 77.8mm
• Thread Pitch: 1/2"-20
• Finish: Black
• Design: Hub-Centric

Borne Off-Road Wheel Spacers provide a reliable solution for increasing your vehicle's track width and improving overall stability. These spacers are designed to create additional clearance for larger tires and wider wheels, preventing contact with suspension components or frame rails during full articulation.

Precision-engineered for a hub-centric fit, these spacers feature a 71.6mm center bore to ensure a vibration-free ride by centering the load directly on the hub. Each spacer is equipped with pre-installed 1/2"-20 studs, providing a secure mounting point that maintains factory-level safety and strength in demanding off-road conditions.

• Bolt Pattern: 5x127mm
• Center Bore: 71.6mm (Hub-Centric)
• Thickness: 50mm
• Thread Pitch: 1/2"-20
• Finish: Black Anodized
• Pre-installed high-strength studs

Borne Off-Road wheel spacers provide the additional track width and clearance required when installing oversized tires or aftermarket suspension components. By pushing the wheels further out from the hub, these spacers help eliminate inner wheel well rubbing and provide a more stable, aggressive stance.

These spacers feature a 71.6mm hub-centric center bore, which ensures the wheel is centered directly on the hub rather than the studs alone. This design is critical for maintaining factory-like ride quality and preventing vibrations at highway speeds. With a 38.1mm (1.5-inch) thickness and durable 1/2-inch studs, they are engineered to handle the stresses of off-road use while providing the necessary offset correction.

• Bolt Pattern: 5x127
• Center Bore: 71.6mm
• Thickness: 38.1mm (1.5 inches)
• Stud Thread Size: 1/2 inch
• Color: Black
• Hub-centric design for precise fitment and vibration-free performance

Borne Off-Road wheel spacers provide the necessary clearance for larger tires and aftermarket suspension components while widening your vehicle's track for improved stability. These spacers are designed to bolt directly to the factory hub, providing an aggressive stance and corrected offset without the need for new wheels.

Precision-engineered with a 71.6mm hub-centric center bore, these spacers ensure a vibration-free ride by centering the load directly on the hub. The durable black finish provides a clean look and protection against corrosion in harsh off-road environments.

• Bolt Pattern: 5x127
• Center Bore: 71.6mm
• Thickness: 25mm
• Stud Size: 1/2-inch
• Finish: Black

Maintain the signature look of your wheels with this BBS 56mm 3D floating center cap. Designed as a direct-fit replacement for wheels with a 56mm center bore, this cap features a dimensional 3D logo that provides depth and visual interest compared to standard flat caps. The high-contrast silver lettering against a black background offers a clean, classic aesthetic that complements a wide range of wheel finishes.

• Diameter: 56mm
• Logo Style: 3D Floating design
• Colorway: Black background with Silver logo
• Fitment: Replaces missing or damaged 56mm BBS center caps
• Installation: Secure snap-in design