Fits the Lexus IS300.

Replace compromised factory hardware or prepare your vehicle for high-performance driving with this ARP wheel stud. Engineered to exceed the demands of racing and spirited street use, these studs provide the strength and fatigue resistance necessary to keep your wheels securely fastened under heavy lateral loads and high heat.

• Thread Size: M12 x 1.5
• Length: 1.5 in
• Material: Heat-treated 8740 chromoly steel
• Tensile Strength: 200,000 psi
• Precision J-form threads for superior fatigue resistance and consistent torque
• Quantity: Single stud (replaces one factory wheel stud)
• Finish: Cadmium plated for long-term corrosion resistance

ARP fasteners are the choice of professional racers globally, offering far greater safety margins than standard OE hardware. This single stud is perfect for replacing a damaged fastener without the need to purchase a complete set.

Complete your vehicle's rear protection system with the ARB Cover Panel designed specifically for the right-hand side (RHS) of an ARB Rear Step Towbar. This panel provides a finished, professional appearance to the towbar assembly while protecting internal components from road debris, mud, and moisture accumulation.

Manufactured to withstand the rigors of off-road use, this replacement panel features a durable black finish that matches the texture and tone of the original ARB equipment. It is an essential component for restoring the aesthetics and utility of your rear bar following a repair or a custom install.

• Side: Right Hand Side (RHS)
• Application: ARB Rear Step Towbar systems
• Finish: Textured Black
• Function: Protective cover and aesthetic trim

Maintain the clean, finished appearance of your rear protection system with this genuine ARB replacement cover panel. Designed specifically for the left-hand side (LHS) of ARB Rear Step Towbar assemblies, this panel serves as a direct replacement for original components that have been scuffed, dented, or lost on the trail or job site.

• Precision Fit: Engineered to match the exact contours and mounting points of ARB Rear Step Towbars for a seamless installation.
• Durable Construction: Manufactured to ARB's rigorous standards to withstand road debris and harsh environmental conditions.
• Protective Finish: Features a resilient black coating that matches the original bar’s aesthetic while providing corrosion resistance.
• System Integrity: Restores the integrated look of the rear bumper assembly, ensuring no internal brackets or hardware remain exposed.

This component is side-specific and intended for the left-hand side of the vehicle only. It is a functional replacement part to keep your ARB rear protection system in top condition.

Fits 2013-2026 Ram 1500 models.

aFe CONTROL forged wheel spacers provide a precise way to widen your truck's track width, improving both stance and stability. By reducing the effective offset of your wheels, these 2-inch spacers create necessary clearance for oversized tires, high-performance brake kits, or upgraded suspension components. The hub-centric design ensures a perfect center on the 77.8mm hub, transferring the load directly to the vehicle's hub and eliminating the vibrations often associated with non-hub-centric alternatives.

Each spacer is CNC-machined from 6061 heat-treated forged aluminum blanks for maximum strength and weight savings. The black anodized finish provides long-term corrosion resistance, while laser-etched logos and sizing markings make identification simple. These kits come complete with high-strength studs and lug nuts for a straightforward installation that bolts directly to factory mounting points.

• Thickness: 2 inches (50.8mm)
• Bolt Pattern: 6 x 139.7mm
• Center Bore: 77.8mm
• Material: 6061 Forged Aluminum
• Finish: Black Anodized
• Hub-Centric design for vibration-free performance
• Hardware: High-strength studs and lug nuts included
• Sold as a pair

Fits select 2008-2027 Audi A4, A5, A6, A7, A8, Q5, Q7, Q8, RS, and S models.

These APR hub centric rings are engineered to adapt the larger 66.5mm center bore found on APR A01 and S01 wheels to the 57.1mm hub diameter common on many Audi and Volkswagen chassis. Precise centering is critical for high-speed stability; without it, the wheel relies solely on the lug bolts for centering (lug-centric), which often results in persistent steering wheel vibration and "wheel wobble."

Machined from high-strength billet aluminum, these rings feature a specialized interlocking design that snaps securely into the wheel bore to prevent movement during installation. These are a direct replacement for rings included with APR wheel sets and are compatible with most other wheel brands utilizing a 66.5mm center bore.

• Adapts 66.5mm center bore to 57.1mm hub diameter
• Precision machined from billet aluminum
• Interlocking design prevents movement and simplifies installation
• Eliminates vibrations caused by non-centered wheel mounting
• Fits APR A01, APR S01, and most wheels with a 66.5mm bore

Ensure safe and secure wheel mounting when running spacers with this set of 45mm APR extended lug bolts. Designed specifically to compensate for the additional thickness of 15mm to 17mm wheel spacers, these bolts provide the critical thread engagement required for safe operation. Fits select 1996-2026 Audi A3, A4, A5, A6, A7, A8, Q3, and Q5 models.

These bolts feature an OEM-style ball-seat profile, making them the correct choice for factory Audi wheels or aftermarket wheels that utilize ball-seat hardware. Each bolt is manufactured from high-strength steel and finished with a black zinc coating for superior corrosion resistance and a clean, understated look that matches dark wheel finishes.

• Bolt Length: 45mm (Optimized for 15mm-17mm spacers)
• Seat Type: OEM-style ball-seat
• Material: High-strength steel construction
• Finish: Durable black zinc coating
• Quantity: Set of 10 bolts
• Compatibility: Engineered for select Audi applications (1996-2026)

Fits select 1996-2026 Audi A3, A4, A5, A6, A7, A8, Q3, Q5, Q7, and e-tron models.

APR lug bolts provide a high-strength solution for securing your wheels, featuring an OEM-style ball-seat interface for maximum contact and safety. These 27mm bolts are engineered from high-grade steel to meet or exceed factory specifications, ensuring reliable clamping force and durability. The black zinc coating offers superior corrosion resistance compared to standard hardware while providing a clean, darkened aesthetic for your wheel assembly.

• Shank Length: 27mm
• Seat Type: OEM-style Ball Seat
• Material: High-strength steel construction
• Finish: Durable black zinc coating
• Application: Designed for use with factory spacers or as a standard length replacement
• Quantity: Set of 10 bolts

Fits select 1996-2026 Audi, Volkswagen, and Lamborghini models with a 5x112 bolt pattern and 57.1mm center bore.

APR Wheel Spacers widen the vehicle track by physically moving the wheel further away from the hub. This adjustment allows you to achieve a precise wheel offset for a flush exterior stance or to provide the necessary clearance for oversized aftermarket brake calipers. Engineered with a weight-saving design, these spacers reduce unsprung mass while maintaining the strength and durability required for high-performance driving.

• Thickness: 15mm
• Bolt Pattern: 5x112
• Center Bore: 57.1mm
• Material: CNC-machined aluminum for precision tolerances
• Finish: Black anodized for enhanced corrosion resistance
• Design: Hub-centric configuration for a vibration-free fit
• Quantity: Set of 2

Proper installation requires longer wheel bolts to ensure safe thread engagement. These spacers are designed to bolt directly to the factory hub, providing a secure interface for your wheels.

Maintain the clean, performance-oriented look of your Weld Drag Sport Forged wheels with this genuine replacement center cap. Specifically designed for 4-lug wheel configurations, this cap provides a seamless fit and restores the aesthetic of your racing setup.

This cap utilizes a push-through (PT) design, mounting from the back of the wheel bore to ensure it remains seated during high-speed passes or street driving. The high-polish finish is crafted to match the mirror-like shine of polished Weld racing wheels, offering excellent corrosion resistance and long-term durability.

• Series: Weld Drag Sport Forged
• Wheel Fitment: 4-Lug configurations
• Diameter: 2.95-inch bore
• Installation Style: Push-Through (PT)
• Finish: Polished

Complete your wheel installation with a genuine Weld DFS PT series center cap. This cap provides a clean, finished look while protecting your wheel hubs and spindle hardware from moisture and road debris. Designed specifically for 5-lug wheel applications, the black finish offers a stealthy, high-performance appearance that complements both street and competition setups.

• Brand: Weld
• Series: DFS PT
• Finish: Black
• Fitment: 5-Lug Wheels
• Outer Diameter: 3.16 in
• Height: 3.20 in

This Weld Racing wheel center cap provides a clean, finished look for your 5-lug RT, S71, or WPD series wheels. Designed as a direct replacement for lost or damaged caps, it ensures a precise fit within the wheel hub to protect the spindle and lug area from road debris and moisture.

Constructed for durability and finished in a sleek black, this cap maintains the aggressive aesthetic of your performance wheels. The 3.16-inch outside diameter and 2.20-inch height are specifically engineered for compatibility with select Weld 5-lug wheel configurations.

• Fits Weld Racing RT, S71, and WPD series wheels
• Designed for 5-lug wheel configurations
• Outside Diameter (OD): 3.16 inches
• Height: 2.20 inches
• Finish: Black

Weld closed-end lug nuts are engineered to provide a secure and clean mounting solution for wheels requiring a shank-style seat. The closed-end design serves a critical functional purpose, shielding the wheel studs from road debris, moisture, and salt to help prevent corrosion and seized hardware. Each lug nut is finished in a high-luster chrome for durability and a classic look that complements Weld wheels.

• Thread Pitch: 12mm x 1.5
• Seat Style: Shank Seat
• Design: Closed End
• Finish: Chrome
• Quantity: Pack of 4

SSR Trail Series Wheel Center Caps provide a clean, professional finish for your off-road wheel setup. Designed specifically for the Trail series, these caps serve as a protective barrier for your vehicle's wheel hubs and axle nuts against mud, dust, and trail debris.

• Authentic SSR Trail Series component
• Durable flat finish for a rugged, low-glare appearance
• Direct-fit replacement for lost or damaged Trail series caps
• Protects hub assembly from environmental contaminants

Complete your wheel setup with an authentic SSR A-Type Super Low center cap. Engineered for a precision fit, these aluminum caps provide a clean, finished look while maintaining the lowest possible profile. The Super Low design is specifically intended for applications where axle nut clearance or a flush, minimalist aesthetic is a priority.

• Brand: SSR
• Model: A-Type
• Profile: Super Low
• Material: Aluminum
• Genuine SSR replacement component

Maintain the clean, competition-ready look of your wheels with the SSR Racing Sports Inspired B-Type Super Low center cap. This aluminum cap is engineered for enthusiasts who prefer a minimal, flush-mount appearance that complements the wheel's spoke profile without unnecessary protrusion.

Constructed from lightweight and durable aluminum, this B-Type cap serves as a precise replacement or aesthetic upgrade. The Super Low configuration is specifically designed for applications where clearance and a streamlined, racing-inspired silhouette are the primary focus.

• Brand: SSR
• Series: B-Type
• Profile: Super Low
• Material: Aluminum
• Design: Racing Sports Inspired

Finish your wheel setup with the SSR Racing Sports Inspired Aluminum B-Type Center Cap. Engineered specifically for SSR wheel series requiring a B-Type fitment, this cap features a Super Low profile designed to provide a sleek, flush aesthetic and maximum clearance for applications with tight hub tolerances.

• Genuine SSR Racing Sports Inspired series accessory
• Precision-machined aluminum construction for long-lasting durability
• B-Type fitment specifically designed for compatible SSR wheels
• Super Low profile provides a streamlined, minimalist look
• Finished in a clean, understated black
• Sold individually

Complete your SSR wheel assembly with this genuine SSR Racing B-Type center cap. Manufactured from high-grade aluminum, this Large/High profile cap is designed to provide additional hub clearance while delivering a clean, finished appearance. It serves as a functional barrier, protecting your wheel hubs and axle nuts from road debris and moisture.

• Genuine SSR Racing component
• B-Type fitment specification
• Large/High profile height for increased clearance
• Durable aluminum construction
• Sold individually (Single center cap)

Note: This is a special order item. Please verify your specific SSR wheel model and hub bore compatibility prior to purchase.

Finish your wheel assembly with the authentic SSR Racing B-Type High Center Cap. This cap is designed specifically for SSR wheels requiring the B-Type fitment pattern. The High profile designation is essential for vehicles with taller hub assemblies or protruding axle nuts that prevent standard, flush-mount center caps from seating properly.

Constructed from lightweight, precision-machined aluminum, these caps offer superior durability and heat resistance compared to plastic alternatives. The black finish provides a clean, racing-inspired aesthetic while protecting the hub bore from road debris and weather exposure.

• Brand: SSR Racing
• Fitment Type: B-Type
• Profile: High (for increased hub clearance)
• Material: Machined Aluminum
• Finish: Black

Complete your wheel setup with an authentic SSR Racing B-Type Low Profile center cap. Precision-engineered from high-grade aluminum, this B-Type cap provides a clean, finished look while protecting your wheel's hub assembly from road debris and weather. The Low profile design is specifically intended for wheel configurations where clearance is a priority or a more flush aesthetic is desired.

• Genuine SSR Racing component
• Series: B-Type
• Profile: Low
• Material: Aluminum construction
• Enhances wheel aesthetics while protecting the hub bore
• Sold individually

Finish your wheel setup with the SSR Racing Sports Inspired B-Type Low Aluminum Center Cap. Designed for wheels compatible with the SSR B-Type fitment, this low-profile cap provides a clean, flush-mount aesthetic that complements a performance-oriented look. The black finish offers a subtle, stealthy appearance that integrates seamlessly with dark or high-contrast wheel faces.

• Genuine SSR B-Type Low profile center cap
• CNC-machined aluminum construction for durability and precise fit
• Sleek black finish for a racing-inspired aesthetic
• Protects the hub bore and axle hardware from dust and road debris
• Part type: B-Type Low

Fits 2017-2021 Honda Civic Si and 2022-2026 Acura Integra models with a 64.1mm hub bore.

These PERRIN 20mm wheel adapters provide a precise solution for mounting wheels with a 5x120 bolt pattern onto your factory 5x114.3 hubs. Engineering a conversion while maintaining hub-centricity is critical for eliminating vibration at high speeds, and these adapters utilize a 64.1mm bore to ensure a perfect interface between the vehicle hub and the adapter. The 20mm thickness helps clear suspension components or larger brake calipers while pushing the wheels out for a more aggressive, flush stance.

• Thickness: 20mm
• Vehicle Bolt Pattern: 5x114.3
• Wheel Bolt Pattern: 5x120
• Hub Bore: 64.1mm
• Quantity: Pair (Set of 2)
• Application: Pattern conversion for Select Honda/Acura

These Method Race Wheels hub centric rings are precision-engineered to bridge the gap between your vehicle's hub and the center bore of your wheels. By ensuring the wheel is perfectly centered on the hub rather than relying solely on the lug nuts, these rings help eliminate steering wheel vibrations and ensure a smoother, more stable ride at all speeds.

• Outer Diameter (OD): 106.25mm (Fits wheel center bore)
• Inner Diameter (ID): 78.3mm (Fits vehicle hub)
• Function: Converts lug-centric setups to hub-centric for improved balance
• Compatibility: Designed for use with Method Race Wheels and other brands with a 106.25mm bore
• Part Number: 106.25-78.3mm

Secure your wheels with confidence using the Method Race Wheels Extended Thread (ET) Spline Lug Kit. These lug nuts are engineered specifically for aftermarket wheels that require a slim profile and increased thread engagement. The extended thread design reaches further into the wheel's lug hole to maximize contact with the stud, a critical feature for wheels with thicker mounting faces.

The spline drive configuration provides an added layer of security and fits easily into narrow lug seats where a standard hex socket might cause damage. Finished in a durable black coating, this 24-piece kit is built to withstand the rigors of both on-road driving and off-road abuse on 6-lug trucks and SUVs.

• Thread Pitch: M14 x 1.5
• Style: Extended Thread (ET) Spline Drive
• Seat Type: Conical/Tapered
• Quantity: 24 Lug Nuts (Complete 6-lug set)
• Finish: Black

Secure your wheels with this Method Race Wheels 20-piece lug nut kit, specifically engineered for 5-lug applications requiring M14x1.5 threading. The extended thread (ET) design provides additional thread engagement on the wheel studs, making them an essential solution for wheels with thicker hub mounting surfaces or setups requiring maximum stud contact.

The spline drive profile offers a slim diameter to fit into the narrow lug holes common on aftermarket off-road wheels while providing a more secure interface than standard hex nuts. Finished in a durable black coating, these nuts are designed to withstand the rigors of both daily driving and off-road environments.

• Thread Pitch: M14x1.5
• Style: Extended Thread (ET) Spline Drive
• Quantity: 20 Lug Nuts
• Compatibility: 5-Lug Bolt Patterns
• Finish: Black

Secure your aftermarket wheels with the Method Spline Lug Nut Kit, designed specifically for heavy-duty 8-lug vehicle applications. This 32-piece set features a spline-drive profile, which is essential for wheels with narrow lug holes where a standard hex socket cannot provide adequate clearance. The spline design also offers an added layer of security over traditional hardware.

• Thread Pitch: M14x1.5
• Quantity: 32 Lug Nuts
• Drive Style: Spline
• Finish: Chrome
• Application: Select 8-Lug Hubs

Each nut is manufactured to precise tolerances for consistent torque delivery and reliable clamping force. The durable chrome finish provides excellent corrosion resistance and a clean, polished look that complements Method wheels and other aftermarket styles. This kit ensures you have a complete set of high-strength hardware for your truck or SUV.