Maintain the clamping force and security of your beadlock rings with the Method Beadlock Hardware Kit. This replacement fastener set is specifically designed to handle the stresses of off-road driving, ensuring the outer ring remains properly seated against the tire bead even at low air pressures.

This 24-piece kit is a direct replacement for lost, stripped, or fatigued hardware on Method Race Wheels beadlock series wheels. Using fresh hardware prevents thread galling and ensures consistent torque across the entire ring for a reliable, leak-free seal.

• Thread Pitch: 5/16-18
• Bolt Length: 1.25 inches
• Kit Contents: 24 individual bolts
• Compatibility: Method Race Wheels Beadlock series

Fits select 1988-2025 Cadillac and Chevrolet models including Escalade, Avalanche, Blazer, Colorado, and C/K Series (1500/2500/3500).

McGard SplineDrive lug nuts are engineered specifically for tuner-style wheels with small-diameter recesses where standard socket-style nuts won't fit. These lug nuts provide a larger seating surface and more stud engagement than typical socket nuts, all while being 30% lighter. Each nut is fully machined from restricted chemistry steel and through-hardened for maximum safety and durability on the street or track.

The premium chrome finish is applied using a multi-layer nickel and microporous chrome process, providing a finish that is guaranteed for life not to rust, chip, or peel. Note: For use with aluminum wheels only. Requires McGard installation tool 65301 or 65302 (sold separately).

• Thread Size: M14x1.5
• Seat Style: Cone Seat
• Overall Length: 1.935 in
• Finish: Chrome
• Quantity: 4-Pack
• Material: Through-hardened restricted chemistry steel
• Manufacturing: Made in the USA
• Installation Requirements: Requires Tool 65301 or 65302

Give your wheel setup a premium finishing touch with the Kansei Special Edition Gold Gel Cap center cap set. These caps are engineered to replace missing or worn hub covers, featuring a high-gloss red finish and a raised gold gel-coated logo that adds depth and visual interest to your Kansei wheels.

• Brand: Kansei
• Series: Special Edition Gold Gel Cap
• Part Type: Wheel Center Caps
• Color: Red with Gold accents
• Quantity: Set of 4
• Packaging: Collector-style boxed set

Constructed for durability and a secure fit, these caps snap directly into the center bore to protect your hub from road debris while maintaining a clean, professional aesthetic for your vehicle.

The Kansei Red Special Gel Cap provides a clean, finished look for your Kansei wheels, serving as either a direct replacement for a lost cap or a custom color upgrade. This center cap features a high-gloss gel coating that protects the vibrant red branding from UV exposure and road debris. Designed for a precise press-fit into the wheel's center bore, it ensures a secure seat that won't vibrate loose during spirited driving.

• Genuine Kansei Wheels accessory
• Durable gel-coated finish for long-lasting color and shine
• Signature Red Special colorway
• Simple snap-in installation to the wheel center bore
• Sold as a single unit

Fits 2003-2018 Volkswagen GTI (MK5, MK6, and MK7).

Achieve a flush, aggressive stance and improved lateral stability with this H&R Wheel Spacer and Bolt Kit. This staggered set features 15mm spacers for the front axle and 20mm spacers for the rear, specifically sized to fill out the wheel wells of the MK5, MK6, and MK7 GTI chassis. By widening the track, these spacers eliminate the factory tucked-in look while providing additional clearance for suspension components or larger brake calipers.

• Front Spacing: 15mm
• Rear Spacing: 20mm
• Extended Hardware: Includes a complete set of matching extended-length wheel bolts for secure installation.
• Hubcentric Design: Engineered for a precision fit to ensure proper wheel centering and vibration-free performance.
• Application: Designed specifically for Volkswagen GTI models ranging from 2003 to 2018.

Fits 2017-2020 Porsche 911 models.

Achieve a more aggressive stance and improved lateral stability with this H&R Wheel Spacer & Bolt Kit. Specifically configured for the 991.2 chassis, this setup utilizes 7mm spacers on the front axle and 14mm spacers on the rear to push the factory wheels out toward the fender lips. This wider track reduces body roll and increases cornering grip while filling out the wheel wells for a flush, custom look.

Every H&R spacer is precision-machined from a proprietary aluminum/magnesium alloy that is both incredibly strong and lighter than standard 6061-T6 aluminum. The hubcentric design ensures a perfect center on the vehicle hub, preventing the vibrations often associated with generic spacers. This complete kit includes the necessary extended-length wheel bolts to ensure proper thread engagement and a safe installation.

• Front Spacer Thickness: 7mm
• Rear Spacer Thickness: 14mm
• Material: High-strength lightweight aluminum/magnesium alloy
• Hubcentric: Yes, for precise fitment and zero vibration
• Finish: Hard anodized for long-term corrosion resistance
• Includes: Two 7mm spacers, two 14mm spacers, and a full set of extended wheel bolts

Fits 2018-2023 BMW M5 (F90) models.

H&R wheel spacers widen your BMW's track, increasing lateral stability and providing a more aggressive, flush stance. By moving the wheel further out from the hub, these 11mm spacers help fill the fender well and can provide the necessary clearance for oversized brake calipers or suspension components.

These spacers are precision-engineered and hub-centric to ensure a perfect fit that maintains wheel balance and eliminates vibration. Manufactured from a proprietary aluminum/magnesium alloy, they are both incredibly strong and lighter than standard aluminum alternatives. The kit is finished with a hard-anodized coating for long-term durability and corrosion resistance.

• Spacer Thickness: 11mm
• Hub-centric design for vibration-free performance
• High-strength aluminum/magnesium alloy construction
• Hard-anodized finish for corrosion protection
• Includes 10 extended-length wheel bolts for a secure installation
• Sold as a pair

Fits 2021 Audi RS6 (C8).

Achieve a precise, flush fitment and a more aggressive stance on your Audi RS6 with this H&R 10mm Wheel Spacer and Bolt Kit. Specifically configured for lowered RS6 (C8) applications, these spacers increase the vehicle's track width to pull the wheels out toward the fender edge, filling the wheel wells more effectively. This kit provides the necessary clearance and aesthetic correction for modified suspension setups while maintaining the high-speed stability and vibration-free performance H&R is known for.

• Spacer Thickness: 10mm
• Vehicle Fitment: 2021 Audi RS6 (C8)
• Application Note: Optimized for lowered vehicles; 8mm front spacers are typically recommended for stock height
• Hardware Included: Complete set of extended lug bolts for a secure installation
• Construction: High-strength aluminum alloy for durability and reduced unsprung weight

Fits 2015-2020 Audi S3.

Improve the stance and handling of your Audi S3 with this H&R Wheel Spacer and Bolt Kit. By widening the track width, these spacers move the wheels out to sit flush with the fenders, correcting the factory "tucked" look. This kit is specifically staggered with 10mm front and 15mm rear spacers to achieve a balanced, aggressive profile on the 8V chassis.

• Front Spacers: 10mm thickness
• Rear Spacers: 15mm thickness
• Hub-centric design ensures a precise fit and vibration-free performance
• Includes extended-length wheel bolts required for safe installation
• Crafted from high-strength, lightweight aluminum alloy
• Hard anodized finish for superior corrosion resistance and durability
• Installs directly between the wheel and the factory hub

Fits 2017-2021 Porsche Cayman S.

Improve the stance and handling characteristics of your Porsche with this precision-engineered H&R wheel spacer and bolt kit. By increasing the track width, these spacers provide a flush fitment that fills the wheel arches while lowering the roll center for improved lateral stability. This staggered configuration is specifically sized with 7mm front and 15mm rear spacers to complement the Cayman S chassis proportions.

Each kit comes complete with the specific extended lug bolts required to maintain proper thread engagement and ensure a secure installation on factory hubs.

• Front Spacer Thickness: 7mm
• Rear Spacer Thickness: 15mm
• Application: 2017-2021 Porsche Cayman S
• Included Hardware: Extended lug bolts for front and rear axles
• Enhances aesthetic fitment and vehicle track width

Fits 2015-2019 Volkswagen Golf R (MK7).

Achieve a more aggressive stance and improved lateral stability on your MK7 Golf R with this H&R Wheel Spacer and Bolt Kit. By widening the vehicle's track, these spacers push the wheels out to be flush with the fenders, filling the wheel wells and providing a more planted appearance. This staggered setup utilizes 10mm spacers for the front and 15mm spacers for the rear to optimize the fitment of factory wheels.

Each kit is engineered for precision fitment and includes the specific extended wheel bolts required to maintain proper thread engagement and safety. The spacers are manufactured from a proprietary aluminum/magnesium alloy that is both incredibly strong and lightweight, minimizing unsprung weight. All components feature a hard-anodized finish for long-term durability and corrosion resistance against the elements.

• Front Spacer Thickness: 10mm
• Rear Spacer Thickness: 15mm
• Material: Proprietary high-strength aluminum/magnesium alloy
• Design: Hubcentric for vibration-free performance
• Includes: (2) 10mm spacers, (2) 15mm spacers, and matching extended wheel bolts

Fits 2016-2020 BMW M2 (F87).

H&R DR Series Wheel Spacers offer a precise solution for widening your vehicle's track, improving both lateral stability and aesthetic stance. This 10mm kit is engineered to fit between the wheel and the hub, effectively pushing the wheels out to fill the wheel wells and achieve a flush fitment. By increasing the track width, these spacers help reduce body roll and improve cornering performance.

Manufactured from a proprietary aluminum/magnesium alloy, these spacers are CNC machined for exact tolerances and a perfect hubcentric fit, ensuring vibration-free operation. The DR Series requires longer wheel bolts, which are included in this complete kit to ensure proper thread engagement and safety. Each component is hard anodized for long-term durability and resistance to corrosion.

• Thickness: 10mm per side
• Series: DR Series
• Material: High-strength aluminum/magnesium alloy
• Finish: Hard anodized
• Includes: (2) wheel spacers and (10) extended wheel bolts
• Hubcentric design for precise fitment and balance

Fits 2025-2026 BMW M5 (G90) and M5 Touring (Base models).

H&R Trak+ DR Series Wheel Spacers widen the vehicle track to push wheels out flush with the fenders, improving lateral stability and providing a more aggressive stance. These 15mm spacers are manufactured from a proprietary aluminum alloy with a higher tensile strength than standard 6061-T6 billet aluminum, ensuring maximum durability under high performance loads.

Engineered for precision fitment, these spacers are hubcentric and feature a full-contact hub face to match the factory geometry. This design ensures even load distribution and essential lateral support, eliminating the vibrations often associated with generic, non-hubcentric spacers.

• Thickness: 15mm
• Bolt Pattern: 5/132
• Center Bore: 66.5mm
• Bolt Thread: 14x1.25
• Finish: Black
• Material: Proprietary high-tensile strength alloy
• Series: Trak+ DR

Complete your Forgestar wheel setup with this genuine 2.45-inch flat O-ring center cap. Designed for a precise fit into compatible hub bores, this cap features a clean, low-profile flat face for a sleek, flush appearance that complements performance-oriented builds.

The O-ring retention system ensures a secure, vibration-resistant friction fit without the need for plastic clips that can become brittle or break over time. These caps serve as a direct replacement for lost or damaged components, helping to protect your vehicle's axle nut and hub assembly from dust, moisture, and road debris.

• Manufacturer: Forgestar
• Part Type: Wheel Center Cap
• Profile: Flat
• Diameter: 2.45 inches
• Retention: O-Ring Seal

Maintain the technical precision and aesthetic finish of your Enkei Racing Series NT03+M wheels with this genuine replacement valve stem. Designed specifically for the NT03+M wheel profile, this stem ensures a leak-free seal and matches the hardware requirements of Enkei's Racing Series line.

The NT03+M is famously engineered with a dual valve stem configuration to allow for simultaneous pressure monitoring during inflation—a critical feature for track-day consistency. Whether you are replacing a damaged unit or refreshing your hardware during a tire change, this component provides the reliability required for high-performance and competitive driving environments.

• Direct replacement for Enkei Racing Series NT03+M wheels
• Sleek black finish complements dark or high-contrast wheel faces
• Complete assembly includes valve stem, internal valve core, and matching cap
• Engineered to withstand high-vibration and high-heat track conditions

Eliminate wheel vibration and ensure a perfect fit with the Enkei Aluminum Racing Hub Centric Ring. These precision-machined rings bridge the gap between your vehicle's 67.10mm hub bore and the 75mm center bore of your Enkei wheels. By centering the wheel precisely on the hub rather than relying solely on the lug studs, these rings provide a hub-centric mount that reduces stress on hardware and ensures a smoother ride.

• Outer Diameter: 75mm
• Inner Diameter: 67.10mm
• Material: High-strength aluminum for superior heat resistance
• Application: Fits wheels with 75mm center bores on 67.10mm vehicle hubs
• Sold Individually: One (1) ring per order

Constructed from aluminum, these rings are engineered to withstand the extreme heat cycles of track use and aggressive driving, resisting the warping or cracking common with plastic alternatives. Most vehicles require four (4) rings for a complete set.

Ensure a precise, vibration-free connection between your aftermarket wheels and your vehicle's hub with Enkei Aluminum Hub Centric Rings. These rings serve as a centering adapter, bridging the gap between a wheel with a 75mm center bore and a vehicle hub with a 66mm diameter.

Machined from high-quality aluminum, these hub rings provide significantly better durability and heat resistance than plastic alternatives, making them a preferred choice for high-performance street and track applications. By ensuring the wheel is perfectly centered on the hub rather than relying solely on the lug nuts, these rings help eliminate steering wheel shimmy and reduce shear stress on wheel studs.

• Outer Diameter (OD): 75mm
• Inner Diameter (ID): 66mm
• Material: Aluminum
• Fitment: Converts 75mm wheel bore to 66mm vehicle hub
• Sold individually (Quantity of 4 required for most vehicles)

Ensure a precise, vibration-free fitment for your aftermarket wheels with Enkei aluminum hub centric rings. These rings bridge the gap between a wheel's 75mm center bore and a vehicle's 64mm hub diameter, ensuring the wheel is perfectly centered on the hub flange rather than relying solely on the lug nuts for alignment. Correct centering is critical for preventing high-speed steering wheel shimmy and ensuring proper load distribution.

Constructed from high-grade aluminum, these rings offer superior durability and heat resistance compared to plastic alternatives. This makes them the preferred choice for high-performance driving and track applications where intensive braking generates significant hub heat that can deform or melt composite rings.

• Outer Diameter (OD): 75mm
• Inner Diameter (ID): 64mm
• Material: Precision-machined aluminum
• Quantity: Sold individually (one ring per unit ordered)

Enkei aluminum hub centric rings are designed to bridge the gap between a wheel's 75mm center bore and a vehicle's 57.1mm hub. By ensuring the wheel is perfectly centered on the hub rather than relying solely on the lug studs, these rings eliminate the steering wheel vibrations often caused by aftermarket wheel fitment.

Precision-machined from high-strength aluminum, these rings offer superior durability and heat resistance compared to plastic alternatives. This makes them a critical component for track-driven vehicles or applications subject to heavy braking, where high temperatures can cause composite rings to deform or fail.

• Outer Diameter (OD): 75mm
• Inner Diameter (ID): 57.1mm
• Material: Machined Aluminum
• Fitment: Universal for 75mm bore wheels on 57.1mm hubs
• Note: Sold Individually

Ensure a precise, vibration-free wheel fitment with this set of four Enkei plastic hub centric rings. These rings are engineered to bridge the gap between an aftermarket wheel with a 73mm center bore and a vehicle hub with a 64.10mm diameter, ensuring the wheel is perfectly centered during installation.

By centering the wheel directly on the hub rather than relying solely on the lug nuts, these rings eliminate the common steering wheel shimmy and high-speed vibrations caused by non-hub-centric fitments. Manufactured from durable, heat-resistant plastic, they provide a snug fit that resists corrosion and won't seize to the hub or wheel, making them ideal for both street and seasonal wheel swaps.

• Outer Diameter (OD): 73mm (Fits wheel bore)
• Inner Diameter (ID): 64.10mm (Fits vehicle hub)
• Material: Heat-Resistant Industrial Plastic
• Quantity: Complete Set of 4
• Prevents steering wheel vibration and reduces hardware stress

Ensure a vibration-free ride and precise wheel alignment with this set of Enkei Plastic Hub Centric Rings. These rings act as a centering sleeve to fill the gap between a 73mm wheel center bore and a vehicle's 60.10mm hub, preventing steering wheel shimmy and reducing stress on the wheel studs during installation and operation.

Manufactured from high-grade, heat-resistant plastic, these rings are designed to withstand the thermal cycles of daily driving while resisting corrosion and seizing to the hub surface. They provide a snug, hub-centric fit for aftermarket wheels, ensuring the wheel is perfectly centered on the hub for improved safety and driving dynamics.

• Outer Diameter (OD): 73mm (fits wheels with a 73mm center bore)
• Inner Diameter (ID): 60.10mm (fits vehicles with a 60.10mm hub diameter)
• Material: Durable, heat-resistant plastic
• Quantity: Pack of 4 rings

Eliminate steering wheel vibration and ensure a precise wheel-to-hub match with this set of four Enkei hub centric rings. When installing aftermarket wheels with a 73mm center bore onto a vehicle with a 57.06mm hub, these rings bridge the gap to ensure the wheel is perfectly centered. By transitioning your setup from lug-centric to hub-centric, you distribute the wheel load more effectively and prevent the minor off-center mounting that causes high-speed shimmy and uneven tire wear.

• Outer Diameter (OD): 73.00mm (Wheel Bore)
• Inner Diameter (ID): 57.06mm (Vehicle Hub)
• Quantity: Pack of 4 rings
• Brand: Enkei
• Material: High-quality construction for heat resistance and durability

Enkei plastic hub centric rings bridge the gap between a wheel's 73mm center bore and a vehicle's 56.10mm hub. These rings are essential for ensuring a hub-centric fitment, which properly centers the wheel on the hub to eliminate radial runout and annoying steering wheel vibrations at highway speeds. By maintaining precise alignment, they reduce shear stress on the wheel studs and ensure a smoother, safer ride.

• Outer Diameter (OD): 73mm
• Inner Diameter (ID): 56.10mm
• Material: Heat-resistant composite plastic
• Quantity: Set of 4 rings
• Application: Centers 73mm bore wheels on 56.10mm hubs

Ensure a smooth, vibration-free ride with Enkei plastic hub centric rings. These precision-engineered components bridge the gap between your vehicle's hub and the wheel's center bore, centering the wheel perfectly to eliminate steering wheel shimmy at highway speeds. By creating a hub-centric fitment, these rings also help distribute the load more evenly across your wheel studs for a more stable mounting surface.

Constructed from high-quality, heat-resistant plastic, these hub rings are designed for long-term durability and ease of installation. Unlike metal alternatives, these plastic components will not corrode or seize to the hub, making them ideal for all-weather performance and ensuring easy wheel removal during maintenance or tire rotations.

• Brand: Enkei
• Inside Diameter (ID): 72.62mm
• Outside Diameter (OD): 67.06mm
• Material: High-grade heat-resistant plastic
• Quantity: Set of 4 rings
• Function: Eliminates high-speed vibration by centering wheels on the vehicle hub

Ensure a precise, vibration-free fit for your wheels with Enkei Hub Centric Rings. These rings serve as a centering sleeve between the wheel's center bore and the vehicle hub, eliminating the gap that causes steering wheel oscillation and unwanted feedback at highway speeds.

By centering the wheel perfectly on the hub rather than relying solely on the lug nuts for alignment, these rings help distribute the load correctly and ensure a smoother ride. This set of four is designed to meet strict tolerances for a snug, secure installation.

• Outer Diameter (OD): 72.56mm (fits 72.56mm wheel bores)
• Inner Diameter (ID): 63.40mm (fits 63.40mm vehicle hubs)
• Quantity: Pack of 4 rings
• Manufacturer: Enkei
• Reference: OD 7256 / ID 6340

Properly center your aftermarket wheels with these Enkei plastic hub centric rings. These rings are designed to bridge the gap between a wheel's 72.62mm center bore and a vehicle's 60.10mm hub diameter, eliminating steering wheel vibration and ensuring a concentric fit. By centering the wheel directly on the hub flange rather than relying solely on the lug studs for alignment, you achieve a smoother ride and prevent unnecessary stress on the hardware.

• Brand: Enkei
• Material: High-quality heat-resistant plastic
• Outer Diameter (OD): 72.62mm (Wheel Bore)
• Inner Diameter (ID): 60.10mm (Vehicle Hub)
• Quantity: Pack of 4 rings

Enkei centering hub rings are precision-engineered to bridge the gap between your vehicle's hub and the center bore of aftermarket wheels. These rings ensure a true hub-centric fitment, which is essential for eliminating steering wheel vibrations and reducing stress on wheel studs by ensuring the wheel is perfectly centered during installation.

By filling the void between a 57.1mm vehicle hub and a 72.6mm wheel center bore, these rings transition the mounting system from lug-centric to hub-centric. This is a critical step for maintaining ride quality and safety when installing wheels with a larger bore than the factory hub specification.

• Outer Diameter (OD): 72.6mm (Fits wheel center bore)
• Inner Diameter (ID): 57.1mm (Fits vehicle hub)
• Quantity: Complete set of 4 rings
• Brand: Enkei

Eliminate steering wheel vibration and ensure a precise fit for your aftermarket wheels with Enkei plastic hub centric rings. These rings bridge the gap between a wheel's 72.62mm center bore and the vehicle's 56.1mm hub diameter, centering the wheel assembly perfectly on the hub to prevent runout issues caused by lug-centric mounting.

Manufactured from high-grade, heat-resistant plastic, these hub rings are designed to withstand the thermal loads of braking while remaining easy to remove. Unlike metal rings, these will not corrode or seize to the vehicle hub, ensuring straightforward maintenance and wheel rotations.

• Outside Diameter (OD): 72.62mm (Wheel Bore)
• Inside Diameter (ID): 56.1mm (Vehicle Hub)
• Construction: Heat-resistant industrial plastic
• Quantity: Complete set of 4 rings

Maintain the clean, finished appearance of your Enkei wheels with this genuine replacement center cap. Designed as a direct fit for specific Racing and Performance Series wheels, this cap protects the hub assembly and axle nut from road debris, moisture, and grime while providing a flush, cohesive look. Fabricated to the same tolerances as the original equipment, it ensures a secure, snap-in fit that resists vibration.

• Genuine Enkei replacement component
• Color: Black finish
• Compatibility: Specifically for Enkei PF01, PF05, PF07, and PF09 wheels
• Installation: Snap-in style for easy, tool-free mounting
• Sold individually

Complete your wheel setup with an authentic Enkei RS05RR 18-inch Center Cap in Black. Specifically engineered for the 18" RS05RR series, this cap provides a flush, finished appearance while shielding your hub assembly from road grime, moisture, and debris. Whether you are replacing a damaged unit or finishing a new set of wheels, this genuine Enkei component ensures the correct fitment and finish match your high-performance wheels.

• Compatible with Enkei RS05RR 18-inch wheels
• Finish: Black
• Protects wheel hub and spindle from corrosion
• Genuine Enkei replacement part
• Note: This is a Special Order item