Fits select 2001-2019 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models with Allison LCT or GM 4T65-E transmissions.

Eliminate transmission fluid leaks at the harness connector with this Fleece Performance replacement internal wiring harness seal. Designed as a direct solution for the Allison LCT1000, LCT2000, and GM 4T65-E, this kit replaces the often hard-to-source OE 20-way pin seal. The assembly ensures a tight seal where the wiring exits the transmission case, preventing oil migration and potential electrical issues.

• Precision 20-way pin seal for secure electrical pass-through
• Includes new connector body and replacement O-ring for a complete repair
• Direct replacement for OE internal harness seals
• Compatible with Allison LCT1000 (MY2001-2019), LCT2000, and GM 4T65-E
• Replaces OE Part Numbers: 29545307, 29541371, 29539792, 29543336
• Manufacturer Part Number: FPE-HAR-GM-LCT-SEAL

This Fleece Performance 6-inch pigtail is a high-quality replacement connector designed for versatile use across Duramax, Cummins, and Powerstroke diesel platforms. Whether you are replacing a damaged connector on an injection pump, fuel pressure regulator, or DEF pump, this multi-use harness provides a reliable connection with 6 inches of wire for easy splicing into the factory loom.

Fits select 2001-2022 GM, RAM, Ford, Nissan, and Jeep vehicles (6.6L / 6.7L).

• Direct Replacement: Replaces worn or corroded factory connectors for critical fuel system and engine sensors to restore proper signal integrity.
• Versatile Application: Used for CP3 regulators, injection pumps, fuel temperature sensors, DEF pumps, and alternator signals depending on the specific vehicle platform.
• Specifications: 6-inch wire pigtail length; multi-use connector configuration.
• Manufacturer Part Number: FPE-HAR-FPR-PT

Cross-Reference & OE Replacement:

• Chrysler: 05143779AA
• GM: 84941154, 13384371, 13585849, 13587776, 89046837, 13343443
• ACDelco: PT2971

Fits 2020-2024 Ford F-250 and F-350 Super Duty trucks with the Powerstroke diesel engine.

The Fleece Performance FPE-HAR-FMC-FAN-20-PT is a heavy-duty, 6-inch replacement cooling fan pigtail designed for the 2020+ Ford Powerstroke fan clutch. Often difficult to source as a standalone component, this connector allows you to repair a damaged or corroded cooling fan harness without replacing the entire assembly. Each pigtail is produced in-house using a fully automated wire cutting and terminal crimping process to ensure exact tolerances and consistent electrical connectivity.

• 6-inch wire pigtail length
• Automated terminal crimping for maximum reliability
• Includes heat-sealable butt-style connectors for a moisture-resistant repair
• Manufacturer Part Number: FPE-HAR-FMC-FAN-20-PT

Fits select 2011-2018 Ford F-250 and F-350 Super Duty (6.7L Power Stroke).

This Fleece Performance cooling fan extension harness provides a cost-effective solution for repairing damaged or brittle wiring without the need to replace the entire engine fan and clutch assembly. Designed to mount directly to the fan assembly, it bridges the connection between the fan and the mating chassis harness, restoring proper communication to the cooling system.

Each harness is manufactured in-house using fully automated wire cutting and terminal crimping processes. This precision manufacturing ensures secure connections and consistent electrical conductivity, providing a reliable fix to get your truck back on the road.

• Direct-fit replacement for damaged or broken factory fan harnesses
• Eliminates the need to purchase a complete fan and clutch assembly
• Automated wire cutting and crimping for maximum reliability
• Mounts to the fan assembly and connects to the chassis harness
• Manufacturer Part Number: FPE-HAR-FMC-FAN-1118

Fits 2020-2024 Ford F-250 and F-350 Super Duty trucks equipped with the 6.7L Powerstroke diesel engine.

Wiring failures at the exhaust back pressure (EBP) sensor are a common issue on the 6.7L Powerstroke, often caused by high heat cycles and engine vibration that make factory connectors brittle. This Fleece Performance pigtail provides a reliable repair solution, allowing you to replace a damaged or corroded connector without replacing the entire engine wiring harness.

Built with high-quality connectors and color-coded wire leads, this pigtail is designed for a secure, weather-tight connection to restore proper signal communication to the ECU. It is a direct-fit replacement for the factory harness end at the EBP sensor location.

• Manufacturer Part Number: FPE-HAR-FMC-EXBP-2020-PT
• Direct replacement for damaged OE EBP sensor connectors
• High-quality wiring and terminals for long-term durability
• Includes pre-stripped color-coded leads for easy installation

Fits 2020-2022 Ford F-250 and F-350 Super Duty trucks (6.7L).

The Fleece Performance Charging Circuit Harness is a direct-fit solution for the common intermittent or persistent battery lamp (MIL) illumination on 2020-2022 Ford 6.7L Powerstroke trucks. The factory charging circuit sense wires, routed from the Powertrain Control Module (PCM) to the alternator, are prone to chafing, stress, and breakage due to their original routing. This harness bypasses the damaged factory wiring with a drop-in replacement that reroutes the alternator connection along the top of the engine for better protection and easier serviceability.

Manufactured with fully automated wire cutting and terminal crimping, this harness ensures high-quality connections that meet or exceed OE standards. Installation is straightforward with factory-style connectors that require no cutting or splicing of the original wiring loom.

• Direct Replacement: Fixes intermittent voltage readings and dashboard battery warnings.
• No Cutting or Splicing: Reroutes the alternator connection directly in-line with factory connections.
• Robust Construction: Features automated terminal crimping for maximum reliability.
• Compatibility: Designed for the primary alternator; compatible with vehicles equipped with secondary alternators.
• MPN: FPE-HAR-FMC-CCH-2022

Fits 2019 Ford F-250 and F-350 Super Duty (6.7L Power Stroke).

The Fleece Performance Charging Circuit Harness (MPN: FPE-HAR-FMC-CCH-19) provides a direct, drop-in solution for the common issue of an intermittent or continuously illuminated battery lamp on the dashboard. This fault is typically caused by damaged, stressed, or chafed charging circuit sense wires within the OEM harness that run from the Powertrain Control Module (PCM) to the alternator. Because the factory wiring is difficult to access and repair, this harness allows for a reliable fix by rerouting the connection away from common damage points.

Engineered for long-term durability, the harness is manufactured using fully automated wire cutting and terminal crimping processes to ensure precise electrical continuity. It installs directly in-line with factory connections without the need for cutting or splicing, allowing you to reroute the alternator connection along the top side of the engine for better protection and easier maintenance.

• Direct-fit replacement fixes intermittent charging circuit MIL/battery lamp
• Eliminates damaged or broken sense wires between the PCM and alternator
• No cutting or splicing required for installation
• Reroutes alternator connection to the engine top side for increased protection
• Precision manufactured with automated wire cutting and terminal crimping
• Designed for the primary alternator; compatible with dual-alternator vehicles
• Manufacturer Part Number: FPE-HAR-FMC-CCH-19

Fits 2017-2018 Ford F-250 and F-350 Super Duty models (6.7L Power Stroke).

The Fleece Performance Charging Circuit Harness is a specialized solution designed to address a common failure point in the 2017-2018 Ford 6.7L Power Stroke charging system. The factory charging circuit sense wires, which connect the Powertrain Control Module (PCM) to the alternator, are prone to stress, chafing, and breakage due to poor original equipment routing. This failure typically triggers an intermittent or continuous battery lamp (MIL) on the dashboard.

This harness provides a drop-in, plug-and-play replacement that eliminates the need for cumbersome diagnostic work or difficult OE harness repairs. Manufactured with fully automated wire cutting and terminal crimping, it utilizes factory-style connectors for a secure fit. The design allows you to reroute the alternator connection along the top side of the engine, protecting the delicate sense wires from the heat and exposure that cause the factory units to fail.

• Direct replacement for failed factory charging circuit sense wires
• Resolves intermittent or constant battery lamp dash alerts
• Engineered for the primary alternator; compatible with dual-alternator setups
• Reroutes wiring over the top of the engine to prevent future chafing and damage
• No cutting or splicing required; installs in-line with factory connections
• Built with automated precision for maximum terminal integrity
• Manufacturer Part Number: FPE-HAR-FMC-CCH-1718

Fits 2011-2016 Ford F-250 and F-350 Super Duty (6.7L Powerstroke).

The Fleece Performance Charging Circuit Harness is a direct-fit solution for the common intermittent or constant battery warning lamp on 2011-2016 Ford Super Duty trucks. This fault is typically caused by the factory Powertrain Control Module (PCM) to alternator sense wires becoming stressed, chafed, or broken due to their vulnerable routing on the underside of the engine. Because the OE harness is integrated into a larger, cumbersome assembly, it is notoriously difficult to diagnose and expensive to replace with factory components.

This harness provides a dedicated, drop-in replacement that bypasses the damaged sections without the need for cutting or splicing into your factory wiring. Manufactured in-house with fully automated wire cutting and terminal crimping, it ensures consistent electrical conductivity and long-term reliability to get your truck back on the road quickly.

• Fixes intermittent or continuously illuminated battery lamp on the dashboard
• Direct replacement for damaged, stressed, or broken charging circuit sense wires
• Drop-in installation with no cutting or splicing required
• Fully automated wire cutting and terminal crimping for high-quality connections
• Reduces diagnostic and repair time compared to full OE harness replacement
• Manufacturer Part Number: FPE-HAR-FMC-CCH-1116

Fits select 2003-2010 Ford F-250 and F-350 Super Duty (6.0L / 6.4L Powerstroke).

This Fleece Performance replacement camshaft position sensor pigtail is an engineered solution for damaged or corroded factory connectors. Unlike standard replacements, this harness features an extended 48-inch pigtail, allowing you to route the wiring from the sensor directly to a more accessible location on top of the engine valley. This extra length is specifically designed to facilitate easier maintenance and troubleshooting on the 6.0L and 6.4L Powerstroke platforms.

Every pigtail is produced in-house with precision manufacturing, utilizing fully automated wire cutting and terminal crimping to ensure maximum conductivity and mechanical pull-strength. This high-standard construction prevents the intermittent signals and poor connections that commonly lead to engine stalling or no-start conditions in heavy-duty diesel applications.

• Extended 48-inch lead for improved harness routing
• Precision-crimped terminals for reliable electrical contact
• Includes heat-sealable butt splice connectors for a weather-tight repair
• 6.0L Application: Matches factory red and orange wire colors
• 6.4L Application: Replaces yellow/violet or green/brown stripe wire circuits
• Manufacturer Part Number: FPE-HAR-FMC-CAM-0310

Fits 2006-2010 GM 2500/3500 trucks with the 6.6L Duramax engine.

Ensure consistent and accurate fuel system data with the Fleece Performance Rail Pressure Sensor Harness. Over time, factory wiring harnesses can become brittle or corroded due to extreme engine bay heat and vibration, often leading to erratic rail pressure readings, limp mode, or intermittent diagnostic trouble codes (DTCs). This replacement harness provides a reliable, secure connection to your engine's fuel rail pressure sensor.

Built to meet or exceed OE standards, this harness uses automotive-grade wiring and high-quality connectors designed to withstand the harsh environment of a heavy-duty diesel engine. It serves as a direct-fit solution to restore signal integrity and engine performance without the need for custom fabrication or complex rewiring.

• Direct-fit replacement for the factory rail pressure sensor connector
• High-quality, weather-tight connectors for maximum signal integrity
• Helps resolve intermittent sensor signals and related fuel system DTCs
• Engineered for the 2006-2010 GM 6.6L Duramax platform
• Manufacturer Part Number: FPE-HAR-DMAX-RP-0610

Fits select 2011-2016 Chevrolet Silverado and GMC Sierra 2500/3500 HD trucks (6.6L).

Repair a damaged Mass Air Flow (MAF) sensor connection with this Fleece Performance replacement pigtail. Specifically designed for the 2011-2016 6.6L Duramax LML, this pigtail allows you to restore proper sensor communication without replacing the entire wiring harness. Each pigtail is produced in-house using fully automated wire cutting and terminal crimping processes to ensure consistent electrical conductivity and durability for heavy-duty applications.

• Direct Replacement: Replaces GM 13579601 and AC Delco PT3345.
• Ready to Install: Includes a 6-inch pigtail and heat-sealable butt-style connectors for a secure, weather-resistant installation.
• Precision Manufacturing: Automated terminal crimping ensures a high-quality connection that stands up to engine bay heat and vibration.
• Manufacturer Part Number: FPE-HAR-DMAX-MAF-1116-PT

Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500/3500 HD models equipped with the 6.6L Duramax engine.

This Fleece Performance Fuel Rail Pressure Harness is a direct-fit replacement for discontinued GM factory harnesses. Manufactured in-house, each harness is produced using fully automated wire cutting and terminal crimping to ensure precise tolerances and reliable electrical connections. This harness routes underneath the turbocharger and connects the fuel rail pressure sensor to the main chassis harness, solving issues caused by heat-damaged or brittle factory wiring.

• Replaces discontinued GM part numbers 12647115 and 12638158
• Precision automated manufacturing for wire cutting and terminal crimping
• Routes under the turbocharger to factory chassis harness points
• Manufacturer Part Number: FPE-HAR-DMAX-LML-RP

Fits select 2001-2010 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 models (6.6L Duramax).

This Fuel Pressure Regulator (FPR) wiring harness is a precision-engineered solution for failing or damaged factory connections on the 6.6L Duramax engine. As factory wiring ages, it becomes brittle from heat and vibration, often leading to erratic fuel pressure signals or engine limp mode. This harness serves as a direct-fit replacement for discontinued GM factory parts, ensuring your fuel system communicates accurately with the ECM.

Fleece Performance manufactures these harnesses in-house with a focus on longevity and signal integrity. The production process utilizes fully automated wire cutting and terminal crimping to maintain exact tolerances and high-pull strength for every connection.

• Direct replacement for discontinued GM Part Numbers: 97378671 and 97327685
• Fully automated manufacturing for consistent terminal crimp quality
• Engineered to withstand the high-heat environment of the Duramax engine bay
• Application: 2001-2010 6.6L Duramax FPR harness
• Manufacturer Part Number: FPE-HAR-DMAX-FPR

Fits 2003-2018 Dodge and Ram 2500 and 3500 trucks equipped with the Cummins diesel engine.

This Fleece Performance replacement starter solenoid connector is designed to repair a damaged or brittle factory engine starter harness. To ensure a reliable electrical connection and long-term durability, the pigtail is produced using a fully automated wire cutting and terminal crimping process. The 6-inch lead provides ample length for easy integration into the existing engine harness.

• 6-inch pigtail lead for flexible installation
• Automated wire cutting and precision terminal crimping
• Includes heat-sealable butt-splice connector for a weather-tight repair
• Manufacturer Part Number: FPE-HAR-CUMM-ST-PT-0318

Fits 2007-2022 Dodge Ram 2500 and 3500 trucks with the 6.7L Cummins diesel engine.

This Fleece Performance turbine speed sensor pigtail provides a reliable repair solution for damaged or corroded wiring on Holset variable geometry turbochargers. Each 6-inch pigtail is produced in-house using a fully automated manufacturing process for precise wire cutting and terminal crimping, ensuring a high-quality connection that restores signal integrity to the engine control module. This kit includes heat-sealable butt-style connectors to protect the repair against moisture and vibration in the harsh engine bay environment.

• Replaces Cummins part number: 3164369
• Fits Holset turbocharger models: HE351VE, HE300VE/VG, HE400VG, and HE451VE
• Compatible with speed sensor part numbers: 4032068, 4032173, 4032315, 4032316, 4307345, 5327846, 5550064, and 40341980
• Features 6-inch pigtail with pre-terminated connector
• Includes heat-sealable butt connectors for a secure installation
• Manufacturer Part Number: FPE-HAR-CUMM-SP-PT

Fits select 2006-2007 Dodge Ram 2500 and 3500 (5.9L).

Restore reliable operation to your 48RE transmission with this Fleece Performance Neutral Safety Switch (NSS) connector pigtail. Designed as a direct replacement for brittle or damaged factory connectors on 2006-2007 Dodge Ram trucks equipped with the 5.9L Cummins engine, this repair harness ensures a secure electrical connection to prevent starting issues or incorrect gear signaling.

Fleece Performance produces these pigtails in-house using a fully automated wire cutting and terminal crimping process, ensuring high-tolerance assembly and long-term durability. Each pigtail features 6 inches of lead wire and includes a heat-sealable butt-splice connector to protect the repair from moisture and corrosion.

• Replacement 48RE neutral safety switch connector
• 6-inch pigtail lead length
• Automated wire cutting and terminal crimping for OE-level reliability
• Includes heat-sealable butt-splice connector
• Manufacturer Part Number: FPE-HAR-CUMM-NSS-PT

Fits select 2007.5-2018 Dodge Ram 2500 and 3500 trucks (6.7L Cummins).

Repair damaged or brittle wiring at the Manifold Absolute Pressure (MAP) sensor with this Fleece Performance MAP Sensor Pigtail. Over time, high engine bay temperatures and vibration can cause the factory connector to fail, leading to intermittent signals and sensor error codes. This pigtail provides a reliable, direct-replacement solution to restore a secure electrical connection between the MAP sensor and the ECU.

• Designed for 2007.5-2018 Dodge Ram 2500/3500 6.7L Cummins applications
• Replaces damaged or corroded factory MAP sensor connectors
• Features pre-terminated, color-coded leads for straightforward installation
• Maintains proper signal integrity for engine management
• Manufacturer Part Number: FPE-HAR-CUMM-MAP-0718-PT

Fits select 2006-2022 Dodge and Ram 2500/3500 (5.9L / 6.7L) trucks.

This Fleece Performance injector harness connector is designed to replace damaged or corroded factory connections between the fuel injector harness and the valve cover wiring harness. Each connector features a 6-inch pigtail, providing ample lead length for clean splicing into the existing engine harness. Manufactured using fully automated wire cutting and terminal crimping, these connectors ensure reliable electrical conductivity and OE-level fitment to keep your Cummins engine running efficiently.

Installation is streamlined with the inclusion of heat-sealable butt-style connectors, which provide a moisture-resistant seal once crimped and heated. Note that two of these connectors are typically utilized on the engine.

• Manufacturer Part Number: FPE-HAR-CUMM-INJ-PT
• Replaces Cummins Part Numbers: 5395297, 4918587
• Pigtail Length: 6 inches
• Wire Processing: Automated cutting and terminal crimping
• Includes: Heat-sealable butt connectors

Fits 2003-2005 Dodge Ram 2500 and 3500 trucks (5.9L Cummins).

This Fleece Performance replacement 4-pin connector and 6-inch pigtail is designed to restore a reliable electrical connection at the fuel injector wiring harness. Specifically engineered for where the main harness mates to the rocker box wiring harness, this pigtail solves common connectivity issues caused by brittle or corroded OE connectors on 5.9L Cummins engines.

• 6-inch pigtail length allows for flexible splicing and routing
• Fully automated wire cutting and terminal crimping ensures consistent electrical contact
• Includes heat-sealable butt-style connectors for a moisture-resistant and secure installation
• Replaces the connector at the rocker box mating point
• Manufacturer Part Number: FPE-HAR-CUMM-INJ-0305-PT

Fits 2019-2024 Ram 2500 and 3500 trucks (6.7L Cummins).

The Fleece Performance cooling fan extension harness allows you to repair a broken or damaged harness without the significant expense of replacing the entire fan and clutch assembly. This harness is mounted directly to the fan assembly and serves as the critical bridge connecting the fan to the vehicle chassis harness.

Produced in-house, these harnesses are manufactured using a fully automated process including wire cutting and terminal crimping. This ensures high-quality electrical connections and exact tolerances, providing a reliable fix to get your truck back on the road with a fully functional cooling system.

• Replaces damaged or frayed fan extension wiring
• Eliminates the need for full fan and clutch assembly replacement
• In-house manufactured with automated cutting and crimping
• Mounts to fan assembly for secure connection to chassis harness
• Manufacturer Part Number: FPE-HAR-CUMM-FAN-1924

Fits select 2013-2018 Ram 2500 and 3500 trucks (6.7L Cummins).

The Fleece Performance cooling fan extension harness allows for a cost-effective repair of the cooling fan circuit on 2013-2018 Cummins-equipped Ram trucks. Instead of replacing the entire fan and clutch assembly due to a broken or damaged harness, this component provides a direct replacement for the harness section mounted to the fan assembly. It ensures a secure connection between the fan and the mating chassis harness, maintaining proper cooling system communication and performance.

• Replaces damaged wiring without needing a new fan and clutch assembly
• Mounts directly to the fan assembly and connects to the chassis harness
• Mates with Fleece Performance chassis side pigtail (MPN: FPE-HAR-CUMM-CF-1322)
• Manufactured in-house with fully automated wire cutting and terminal crimping
• Manufacturer Part Number: FPE-HAR-CUMM-FAN-1318

Fits select 2013-2024 Ram 2500, 3500, 4500, and 5500 trucks (6.7L).

Restore reliable electrical connectivity to your Cummins engine control module with this Fleece Performance 96-pin ECM connector repair kit. This kit provides a direct solution for damaged, melted, or corroded factory connector housings, allowing you to repair the harness rather than replacing the entire engine loom. The gray color-coding ensures correct port identification during installation on the ECM.

• 96-pin terminal configuration
• Color-coded gray housing for precise port matching
• Includes replacement terminals for secure wire pinning
• Direct replacement for OE-style 96-pin connectors
• Manufacturer Part Number: FPE-HAR-CUMM-ECM-96-GY

Fits 2013-2024 RAM 2500, 3500, 4500, and 5500 models (6.7L).

The Fleece Performance 96 Pin (Green) ECM Connector Repair Kit provides a professional-grade solution for damaged or corroded engine control module wiring. Rather than replacing the entire engine harness, this kit allows you to rebuild the specific connection to the ECM, restoring critical signal integrity between the engine sensors and the controller. Each kit is designed to match OE terminal and housing specifications for a secure, weather-sealed fit.

• 96-pin configuration specifically for the Green ECM port
• Includes heavy-duty connector housing, terminals, and seals
• Restores reliable electrical contact at the engine control module
• Replaces damaged factory connectors caused by heat, vibration, or moisture
• Manufacturer Part Number: FPE-HAR-CUMM-ECM-96-GR

Fits 2013-2024 RAM 2500, 3500, 4500, and 5500 trucks equipped with the 6.7L Cummins turbo diesel engine.

Electrical issues at the Engine Control Module (ECM) are often traced back to corroded, loose, or heat-damaged terminals within the main harness connector. This Fleece Performance ECM Connector Repair Kit provides a direct solution for restoring a reliable electrical connection without the expense and labor of replacing the entire engine wiring harness. This kit features the 96-pin brown connector housing, ensuring a precise match for the factory interface.

• 96-pin (Brown) configuration specific to the 6.7L Cummins ECM
• Engineered for a secure, OE-style fitment to restore signal integrity
• Replaces damaged or brittle factory connector housings
• Manufacturer Part Number: FPE-HAR-CUMM-ECM-96-BR

Fits select 2013-2024 RAM 2500, 3500, 4500, and 5500 trucks (6.7L Cummins).

The Fleece Performance ECM Connector Repair Kit provides a reliable solution for damaged, corroded, or melted 96-pin engine control module connectors. This blue-coded connector housing is a common failure point on Cummins engine harnesses due to moisture intrusion or vibration. This kit allows technicians and owners to repair the existing harness at the connector interface, restoring signal integrity between the ECM and vital engine sensors without the expense of a full harness replacement.

• Genuine 96-pin configuration with blue color-coding
• Restores proper electrical connection to the Engine Control Module
• Designed specifically for the 6.7L Cummins diesel engine harness
• High-quality materials to resist heat and environmental contaminants
• Manufacturer Part Number: FPE-HAR-CUMM-ECM-96-BL

Fits 2003-2012 Dodge Ram 2500 and 3500 (6.7L).

Restore the critical connection to your engine cooling fan with the Fleece Performance Cooling Fan Pigtail kit. When a serpentine belt fails, it often severs the wiring to the fan clutch. This kit is designed to repair that damage by providing both sides of the connector with 6-inch flying leads, allowing for a complete harness repair on both the engine and component sides.

Produced in-house with precision, Fleece Performance uses a fully automated wire cutting and terminal crimping process. This ensures consistent terminal tension and high-quality connections that stand up to the vibration and heat of the Cummins engine bay. It is a direct solution to get your truck back on the road with a reliable cooling system.

• Manufacturer Part Number: FPE-HAR-CUMM-CF-0312
• Lead Length: 6-inch flying leads
• Configuration: Includes both male and female connector sides
• Manufacturing: Fully automated wire cutting and terminal crimping
• Application: Repairs cooling fan clutch harness damage

Fits select 2002-2022 Dodge, Ram, and Chrysler vehicles (6.7L).

This 6-inch replacement alternator pigtail from Fleece Performance provides a robust solution for damaged, brittle, or corroded factory connectors. To ensure maximum reliability and a secure electrical connection, each harness is produced in-house using a fully automated process for precision wire cutting and terminal crimping. While primarily used as an alternator pigtail for the 6.7L Cummins engine, this versatile connector also serves as a direct replacement for various lighting and sensor circuits across multiple Dodge and Chrysler applications.

• Direct replacement for 2007-2022 Ram alternator connectors
• Precision manufactured with automated wire cutting and terminal crimping
• Includes two heat-sealable butt-style connectors for a weather-tight installation
• Heavy-duty 6-inch lead length for easy splicing
• Manufacturer Part Number: FPE-HAR-CUMM-ALT-0722

Specific Application Notes:

• Alternator: 2007-2022 Dodge Ram
• ABS Speed Sensor: 2007-2015 Dodge Ram
• Reverse Light: 2005-2015 Dodge Ram
• License Plate Light: 2002-2010 Dodge Ram
• Parking Light: 2007-2010 Dodge Ram
• Horn: 2006-2010 Chrysler
• Washer Fluid Level Sensor: 2006-2007 Chrysler

Fits 2011-2016 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD (6.6L).

The Fleece Performance CP3 Regulator Extension Harness (FPE-HAR-CP3-EXT) provides a reliable, plug-and-play solution for extending the fuel pressure regulator connection on Bosch CP3 high-pressure injection pumps. This harness is an essential component for 6.6L Duramax owners performing fuel system modifications or CP3 conversions, providing the necessary length to reach the regulator without putting stress on the factory wiring loom or requiring permanent modifications to the vehicle harness.

• Seamless Integration: Features OE-style connectors for a secure, weather-sealed connection that clicks into place like a factory part.
• Zero Splicing: Fully plug-and-play design eliminates the need for cutting, soldering, or heat-shrinking, preserving the integrity of your electrical system.
• Application Specific: Engineered specifically for the Bosch CP3 regulators used in 2011-2016 LML Duramax applications.
• Durable Construction: Built with high-quality automotive-grade wiring to withstand the heat and vibration of the engine bay.
• Manufacturer Part Number: FPE-HAR-CP3-EXT

Vehicle Fitment

• 2011-2016 Chevrolet Silverado 2500 HD / 3500 HD (6.6L)
• 2011-2016 GMC Sierra 2500 HD / 3500 HD (6.6L)

Fits 2013-2018 Ram 2500 and 3500 trucks (6.7L Cummins).

The Fleece Performance Intake Air Temperature (IAT) sensor extension harness is a specialized solution for diesel owners installing aftermarket intake systems or relocating factory components. When factory wiring is too short to reach a new sensor location, this harness provides the necessary length without the reliability risks of cutting and splicing the OEM wiring.

Built with automotive-grade materials and factory-style connectors, this extension ensures a secure, moisture-resistant connection that maintains signal integrity for accurate ECU readings. This is a true plug-and-play component that simplifies installation and keeps your engine bay looking professional.

• Direct Application: Designed specifically for the 2013-2018 6.7L Cummins platform.
• OEM Quality Connectors: Features correct terminal ends for a positive lock with factory sensors and harnesses.
• Plug-and-Play: No wire stripping, soldering, or pinning required.
• Manufacturer Part Number: FPE-HAR-67-IAT-EXT