Fits the 2018 Mercedes AMG GT4 (X290) 43 (3.0L).

This BMC high-performance replacement panel air filter (part number FB956/20) is a direct drop-in upgrade for the factory intake system. Designed for enthusiasts seeking better engine breathing without compromising filtration, BMC filters utilize a multi-layered cotton gauze media treated with low-viscosity oil. This construction allows for a higher volume of air to reach the intake compared to standard paper elements, reducing pressure drop while capturing impurities down to 7 microns.

• Direct Fit: Designed to replace the OE filter in the factory airbox with no modifications required.
• Premium Construction: Features a continuous polyurethane frame to prevent distortion and ensure a precise, leak-free seal.
• Race-Proven Media: Multi-layer oiled cotton gauze protected by an epoxy-coated alloy mesh for structural integrity and corrosion resistance.
• Sustainable Design: Fully washable and reusable with BMC regeneration kits, eliminating the need for frequent disposables.
• Part Number: FB956/20

Fits 2016-2024 Porsche Boxster and Boxster S models (2.0L).

The BMC FB926/20 is a high-performance replacement panel air filter designed to provide superior airflow and filtration over the factory paper element. Engineered for the 718-generation intake system, this filter utilizes a multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities as small as 7 microns without restrictive pressure drops.

BMC filters are manufactured using a specialized "Full Moulding" process, which creates the iconic red filter from a single mold with no welded joints. This construction ensures the filter is highly durable and maintains its shape under high-stress conditions. The media is reinforced with an epoxy-coated alloy mesh, protecting the cotton from intake debris and providing structural integrity.

• Direct drop-in replacement for the OE air filter
• Multi-layered cotton gauze media for high permeability
• Epoxy-coated alloy mesh for corrosion resistance and strength
• Washable and reusable for long-term service life
• Manufacturer Part Number: FB926/20

Fits select 2013-2018 BMW X5 (F15/F85) 50iX models.

This BMC FB866/04 high-performance air filter kit is a direct-fit replacement for the restrictive factory paper filters in your BMW X5. Engineered for enthusiasts seeking improved induction efficiency without compromising filtration, these filters utilize a multi-layered cotton gauze media soaked in low-viscosity oil, secured between two epoxy-coated aluminum alloy mesh screens. This construction provides a larger surface area and lower pressure drop compared to OE filters, supporting more consistent performance across the RPM range.

• Direct replacement for OEM panel filters, fitting the factory airbox
• Increased airflow for improved engine responsiveness
• Washable and reusable design for long-term durability
• Full kit includes both filters required for the V8 intake system
• Constructed with high-quality materials to resist fuel vapors and oxidation
• Manufacturer Part Number: FB866/04

Fits 2016 Mercedes-Benz C400 (W205, A205, C205, S205) models.

The BMC FB833/20 high-performance panel air filter is a direct replacement for the restrictive factory paper element. Designed to provide increased airflow and filtration efficiency, this filter is constructed using a multi-layered cotton gauze media soaked in low-viscosity oil. This allows for superior air permeability while trapping impurities as small as 7 microns to protect your engine's internal components.

The filter features an epoxy-coated alloy mesh for structural rigidity and resistance against petrol fumes and oxidation. Unlike disposable OE filters, this unit is washable and reusable, providing long-term value and consistent performance.

• Direct replacement for factory panel filter
• Multi-layer cotton gauze media for high flow and filtration
• Washable and reusable design
• Epoxy-coated alloy mesh protects against oxidation
• Manufacturer Part Number: FB833/20

Note: This vehicle application requires two (2) filters for a complete replacement. These are sold individually.

Optimize your intake system's efficiency with the BMC FB593/04 high-flow replacement panel air filter, engineered specifically for the 2009+ Porsche 911 (997.2) 3.8 Turbo. This performance filter serves as a direct-fit replacement for the restrictive factory paper element, utilizing multi-layered cotton gauze media to provide a significant increase in airflow while maintaining filtration standards down to 7 microns.

• Precision Engineering: Designed to drop directly into the factory airbox for an airtight, secure seal.
• High-Flow Media: Multi-layered cotton gauze soaked in low-viscosity oil ensures maximum air volume and excellent debris capture.
• Robust Construction: Features a one-piece red polyurethane frame molded to eliminate potential leaks and resist thermal deformation.
• Sustainable Performance: This filter is fully washable and reusable, designed to last the lifetime of the vehicle when maintained with BMC cleaning kits.
• Manufacturer Part Number: FB593/04

Fits 1993-1997 Porsche 911 (993) Carrera models (3.6L).

The BMC FB136/04 Replacement Panel Air Filter is a high-performance drop-in solution designed to replace the restrictive factory paper element. Engineered for the 993-generation Porsche 911, this filter utilizes multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities as small as 7 microns while significantly increasing air permeability for better engine efficiency.

• Direct replacement for the OEM air filter in the factory air box
• Constructed with epoxy-coated alloy mesh to ensure fuel vapor resistance and structural integrity
• One-piece molding system (Full Moulding) prevents breakages and leaks
• Washable and reusable for the life of the vehicle
• Manufacturer Part Number: FB136/04

Fits 2000-2007 BMW M3 (E46) models (3.2L).

The BMC FB132/01 is a high-performance replacement panel air filter engineered to optimize airflow while maintaining superior filtration. This direct-fit element replaces the restrictive factory paper filter in your E46 M3 airbox, utilizing a multi-layered cotton gauze media that allows for increased oxygen delivery to the engine for improved combustion efficiency.

• Precision-engineered drop-in replacement for the OEM air filter.
• Constructed with multi-layered cotton gauze soaked in low-viscosity oil to capture impurities down to 7 microns.
• Reinforced with an epoxy-coated alloy mesh to ensure structural integrity against intake pressure and fuel vapors.
• One-piece molding process ensures a perfect seal and prevents bypass of unfiltered air.
• Washable and reusable design provides a long-lasting alternative to disposable filters.
• Manufacturer Part Number: FB132/01

Fits 2019+ BMW X5 M (F95) and X6 M (F96).

The BMC FB01103 high-performance replacement panel air filter is designed to replace the restrictive factory paper filter in your BMW. Engineered for increased airflow and filtration efficiency, this filter features a multi-layered cotton gauze media soaked with low-viscosity oil to trap impurities while maintaining high permeability. The filter is housed in a durable, molded rubber frame to ensure a precise, airtight seal within the factory airbox.

• Direct drop-in replacement for original equipment
• Washable and reusable for extended service life
• Multi-layered cotton gauze filtration media
• Epoxy-coated alloy mesh for structural integrity
• Precision fit for BMW F95/F96 chassis airboxes
• Manufacturer Part Number: FB01103

Fits select 2017-2024 Porsche Cayenne III (9YA) models equipped with the 4.0L V8 engine.

The BMC FB01023 Replacement Panel Air Filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element. Constructed using a multi-layer cotton gauze media soaked in low-viscosity oil, this filter provides increased airflow while maintaining a high filtration efficiency of 98.5% for particles as small as 7 microns. The single-piece molding process ensures a durable frame that eliminates the risk of breakage or leaking at the edges.

• Precision fit for the factory airbox to maintain an airtight seal
• Epoxy-coated alloy mesh protects the filter media from heat and debris
• Pre-oiled and ready for immediate installation
• Washable and reusable using BMC cleaning kits for a lifetime of service
• Manufacturer Part Number: FB01023

Fits 2017-2024 McLaren 720S (4.0L).

The BMC FB01022 Full Kit is a high-performance intake solution designed to replace the restrictive factory paper elements in the McLaren 720S. Engineered specifically for the 4.0L twin-turbocharged engine, these filters utilize a multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities as small as 7 microns while significantly increasing airflow volume to the combustion chamber.

Constructed using a specialized molding process that results in a single-piece filter with no welded joints, these units eliminate the risk of breakage under high-pressure conditions. The filter media is protected by an epoxy-coated alloy mesh, ensuring structural integrity and resistance to fuel vapors and oxidation. This drop-in kit provides a precision seal within the factory airbox for an immediate improvement in engine breathing and throttle response.

• Manufacturer Part Number: FB01022
• Includes a complete set of filters for the 4.0L powerplant
• Washable and reusable filtration media for long-term service
• F1-derived technology for street and track applications
• High-flow design with superior filtration efficiency compared to OE paper

Fits 2017-2019 Porsche 911 GT2 RS (991.2).

The BMC Carbon Racing Filter (CRF) is a high-performance replacement air filter specifically engineered for the 991.2 GT2 RS. Unlike standard performance filters, the CRF utilizes a 100% carbon fiber support structure designed to withstand the high-suction and high-heat environment of a twin-turbocharged flat-six while maintaining maximum structural integrity. This professional-grade filtration system optimizes intake velocity and increases airflow compared to the factory paper element, providing the throughput required for track-focused performance.

• Direct-fit replacement for the factory air filter element.
• Full carbon fiber frame provides extreme rigidity and weight savings.
• Multi-layered cotton gauze filtration media soaked in low-viscosity oil to capture particles down to 7 microns.
• Epoxy-coated alloy mesh protects against fuel vapors and oxidation.
• Washable and reusable design for long-term serviceability.
• Manufacturer Part Number: CRF01082

Fits select 2003-2012 Dodge/Ram 1500, 2500, and 3500 models.

The Banks Power 42645 Pre-Filter is a specialized air filter wrap designed to add a critical layer of defense for your Ram-Air intake system. Specifically engineered to fit Banks filter part number 42148, this pre-filter uses a polyester mesh with uniform micron openings to trap large debris, mud, and bugs before they can become embedded in your primary filter's pleats. This simple addition effectively extends the time between service intervals and preserves the life of both dry and oiled filters.

Constructed for extreme environments, the 42645 features a hydrophobic surface treatment that repels water and moisture, ensuring consistent performance in humid or wet conditions. The material is rated to resist heat up to 400°F and remains durable without shattering in freezing temperatures. This cleanable and reusable wrap is an essential upgrade for vehicles operating in dusty or off-road conditions.

• Manufacturer Part Number: 42645
• Material: Hydrophobic polyester mesh with uniform micron openings
• Compatibility: Designed for Banks Ram-Air Filter 42148
• Temperature Rating: Heat resistant up to 400°F; freeze-resistant
• Filter Support: Works with both dry and oiled filter elements
• Maintenance: Fully cleanable and reusable

Designed as a replacement filter for Takeda performance intake systems, the aFe Pro DRY S air filter utilizes a specialized 3-layer synthetic media to maximize airflow while maintaining superior engine protection. This oil-free design simplifies maintenance, allowing for quick cleaning with soap and water without the need for re-oiling or drying kits.

• Oil-Free Media: 3-layer synthetic Pro DRY S media provides maximum convenience and high airflow.
• High Filtration Efficiency: Validated at 99.2% efficiency to trap harmful contaminants and protect internal engine components.
• Inverted Design: Features a 6-inch inverted base and a 2-3/4-inch domed top with a velocity stack to optimize air velocity.
• Durable Construction: Built with a 3-1/2-inch flange and 8-inch overall height for a secure fit within compatible intake housings.
• Easy Maintenance: Fully washable and reusable; cleans in minutes with no specialized oils required.
• Manufacturer Part Number: TF-9019D

Fits 2011-2013 Ford F-150 (FX2, FX4, King Ranch, Lariat, Limited, Platinum, XL, and XLT).

The aFe MagnumFLOW Pro-GUARD 7 Stage 2 replacement air filter is designed to provide maximum engine protection and high-velocity airflow. It features a specialized 7-layer media construction, combining five layers of progressively finer mesh cotton gauze with two layers of synthetic media. This hybrid "oiled" conical design offers superior dust-holding capacity, allowing for longer service intervals between cleanings while maintaining horsepower and torque gains.

Constructed for longevity and a perfect fit, the filter features a 100% 55-Shore A polyurethane top and base. The pliable polyurethane flange is engineered with integrated bumps to ensure a tight, leak-proof seal against the intake housing over the life of the part. This filter is fully washable and reusable, providing a sustainable performance solution for your vehicle.

• Filter Media: Pro-GUARD 7 (5 layers of cotton gauze / 2 layers of synthetic)
• Construction: 100% 55-Shore A polyurethane top, base, and flange
• Efficiency: High-flow oiled design with tall, evenly spaced pleats
• Maintenance: Washable and reusable with soap and water
• Compliance: 50-state emissions legal
• Warranty: Limited lifetime warranty
• Manufacturer Part Number: 72-90069M

Fits 2013-2020 Acura TLX and Honda Accord (3.5L).

The aFe Power Magnum FLOW PRO DRY S replacement air filter (MPN 31-10258) is engineered to outflow factory paper filters for improved performance and protection. This non-oiled OE replacement filter features three layers of progressive synthetic media, offering a balance of airflow and filtration efficiency without the maintenance hassle of oiling. The tall, evenly spaced pleats provide excellent dust-holding capacity, allowing for longer service intervals between cleanings.

• Oil-Free Media: Three layers of progressive synthetic (Dry) media provide maximum convenience and easy maintenance.
• Superior Construction: A 100-percent polyurethane frame on all sides provides extra long filter life and resists heat and chemical degradation.
• Precision Fit: An integrated urethane bump seal ensures a tight, leak-free seal over the life of the filter, fitting perfectly into the factory housing.
• Sustainable Performance: This filter is fully washable and reusable for multiple cleaning cycles, replacing disposable paper filters.

Fits select 2009-2016 BMW 528i (F10), X1, and Z4 (L4-2.0L Turbo N20).

The aFe Power MagnumFLOW OER PDS (Pro DRY S) air filter is a high-performance OE replacement designed to outflow restrictive stock paper filters for improved throttle response and protection. This non-oiled air filter is constructed with three layers of progressive synthetic media for maximum convenience, providing years of hassle-free service without the need for filter oils.

• Pro DRY S Media: Three layers of progressive synthetic (dry) media offer maximum convenience and are washable for multiple cleaning cycles.
• Premium Construction: A 100-percent polyurethane boxed frame on all sides ensures structural integrity and an extra-long service life.
• High-Capacity Design: Tall, open, and evenly spaced pleats provide superior dust-holding capacity and longer intervals between cleanings.
• Precision Seal: An integrated urethane bump seal ensures a tight, leak-free fit within the factory air housing.
• MPN: 31-10227

Fits select 1986-1997 BMW 3-Series, 5-Series, 7-Series, and 8-Series models. This aFe MagnumFLOW Pro DRY S (OER) air filter is a high-performance, oil-free replacement for your factory paper element, designed to increase airflow while maintaining maximum convenience.

Constructed with three layers of progressive synthetic media, this filter provides excellent dust-holding capacity and filtration efficiency without the need for filter oils. The 100-percent polyurethane frame provides a rigid, durable foundation that resists heat and chemical degradation over time. To ensure a factory-perfect fit, aFe incorporates an integrated urethane bump seal that compresses against the airbox housing for a leak-free seal.

• Pro DRY S Media: Three layers of oil-free synthetic media for maximum convenience and easy maintenance.
• Washable and Reusable: Designed for multiple cleaning cycles to provide years of service.
• Durable Construction: 100% polyurethane frame on all sides ensures a long filter life and structural integrity.
• Integrated Bump Seal: Provides a tight, no-leak seal over the life of the filter.
• Performance Upgrade: Engineered to outflow stock paper filters for improved throttle response.
• MPN: 31-10047

Fits select 1981-2024 Nissan, Infiniti, Subaru, Isuzu, and Saab vehicles (including Altima, Maxima, Murano, Pathfinder, and WRX models).

The aFe Power MagnumFLOW OER Pro DRY S performance air filter provides a direct OE-replacement upgrade that balances flow, protection, and maintenance convenience. Designed to replace restrictive factory paper filters, this drop-in unit features three layers of progressive synthetic media that require no oiling. The dry media is easily serviced—simply wash and reuse for multiple cleaning cycles, ensuring long-term filtration efficiency without the risk of fouling MAF sensors.

Constructed for durability, the filter is housed in a 100-percent polyurethane frame that resists heat and chemical degradation. Unlike standard filters, aFe uses a progressive bump seal design to ensure a leak-free, airtight fit within the factory airbox, even after years of use. This rigid construction prevents filter collapse or bypass, ensuring only clean air reaches your intake tract.

• Manufacturer Part Number: 31-10010
• Filter Media: Pro DRY S 3-Layer Progressive Synthetic (Non-Oiled)
• Frame Material: High-temperature 100% Polyurethane
• Seal Type: Integrated Progressive Bump Seal
• Maintenance: Fully washable and reusable
• Installation: Direct drop-in replacement for factory housing

The aFe POWER Quantum Filter GUARD (MPN 28-10423) provides an essential primary layer of protection for your performance air filter. Designed to capture large debris such as twigs, bugs, and heavy contaminants before they reach the main filter media, this pre-filter significantly extends service intervals and maintains consistent airflow. It is engineered specifically to fit aFe Quantum series intake filters.

• High-Quality Material: Manufactured from a durable dry weave polyester fabric that does not attract dirt and is engineered for maximum breathability.
• Easy Maintenance: The dry weave design is fully washable; simply clean with mild soap and water to restore performance without the need for specialized oils.
• User-Friendly Design: Features integrated pull tabs for a quick, secure installation and easy removal during maintenance.
• Authentic Styling: Finished with a silk-screened aFe POWER logo to complement your Quantum intake system.
• Manufacturer Part Number: 28-10423

The aFe Power Magnum FLOW Pro DRY S performance air filter provides high-flow filtration without the need for filter oil. Engineered with three layers of progressively finer synthetic media, this conical filter delivers 99.2% filtration efficiency while maintaining excellent airflow. The 100% polyurethane frame, base, and top provide exceptional structural integrity, while the pliable flange with integrated bumps ensures a leak-free seal against the intake housing for the life of the filter.

• Oil-Free Filtration: Pro DRY S media uses three layers of synthetic material for maximum convenience and easy maintenance.
• Durable Construction: Full 100% polyurethane frame and base resist heat and chemicals for an extra-long service life.
• Washable and Reusable: Designed for multiple cleaning cycles; simply wash with soap and water to restore performance.
• Optimized Airflow: Tall, evenly spaced pleats increase dust-holding capacity and extend the interval between cleanings.
• Reliable Seal: Pliable polyurethane flange with integrated bumps creates a tight, secure seal without the need for gaskets.

Technical Specifications:
Part Number: 21-91109
Flange: 6.5" x 4.75"
Base: 9" x 7"
Top: 9" x 7" (Inverted)
Filter Height: 9"
Media Type: Pro DRY S (Synthetic, Oil-Free)

The aFe MagnumFLOW Pro DRY S performance air filter provides high-flow filtration with the convenience of oil-free maintenance. This conical filter features three layers of progressively finer synthetic mesh media, offering 99.2% filtration efficiency to protect your engine from harmful particulates while maintaining optimal airflow. The tall, evenly spaced pleats increase dust-holding capacity, extending the service interval between cleanings.

Built for durability and a precision fit, the filter uses a 100% polyurethane top and base. The pliable flange is engineered with integrated bumps to ensure a tight, leak-free seal over the life of the component. Maintenance is straightforward; the synthetic media is fully washable and reusable, cleaning up easily with standard soap and water without the need for specialized oils.

• Series: MagnumFLOW Pro DRY S
• MPN: 21-91057
• Filter Style: Conical (Inverted Top)
• Flange (F): 4 in
• Base (B): 6 in
• Top (T): 4-1/2 in (Inverted)
• Height (H): 7 in
• Media: 3-Layer Non-Oiled Synthetic
• Efficiency: 99.2%
• Construction: 100% Polyurethane frame and flange

The aFe MagnumFLOW Pro DRY S replacement air filter (MPN 21-91018) utilizes three layers of progressively finer synthetic media to provide high airflow with 99.2% filtration efficiency. This oil-free, conical filter is designed for maximum convenience, requiring no oils for recharging and cleaning easily with simple soap and water. The tall, evenly spaced pleats provide a high dust-holding capacity, extending service intervals without sacrificing performance.

Constructed with 100% polyurethane on all sides, including an integrated seal bump on the flange, this filter ensures a leak-free fit over its service life. The inverted top design increases surface area for improved flow characteristics.

• Manufacturer Part Number: 21-91018
• Filter Media: Pro DRY S (3-Layer Oil-Free Synthetic)
• Efficiency Rating: 99.2%
• Flange Diameter: 5.5 in
• Base Dimensions: 7 in x 10 in
• Top Diameter: 7 in (Inverted)
• Filter Height: 8 in
• Frame Material: 100% Polyurethane

The aFe Power MagnumFLOW Pro DRY S performance air filter provides a balance of high airflow and maximum convenience for your intake system. This oil-free, conical filter features three layers of progressively finer mesh synthetic media, achieving a 99.2% filtration efficiency rating without the need for recharge oils. Designed for durability and ease of use, it provides an excellent upgrade over restrictive factory paper elements.

• Oil-Free Media: The Pro DRY S synthetic media offers maximum convenience, washing clean with simple soap and water for repeated reuse.
• Rugged Construction: Features a 100% polyurethane frame, top, and base for a long service life and high resistance to engine bay heat.
• Precise Sealing: A pliable polyurethane flange with integrated bumps ensures a tight, no-leak seal over the life of the filter.
• Extended Service Intervals: Tall, open, and evenly spaced pleats provide excellent dust-holding capacity, maintaining airflow between cleanings.

Technical Specifications:

• Manufacturer Part Number: 21-40505
• Filter Style: Conical
• Flange Diameter (F): 4 in
• Base Diameter (B): 6 in
• Top Diameter (T): 4 in
• Filter Height (H): 5 in
• Filtration Efficiency: 99.2%
• Media Type: Pro DRY S (Non-Oiled)

The aFe Power MagnumFLOW Pro DRY S performance air filter is designed to provide maximum airflow and convenience for high-performance intake systems. This oil-free, conical filter utilizes three layers of progressively finer synthetic mesh media to deliver a 99.2% filtration efficiency rating without the need for specialized oils. The large, evenly spaced pleats provide high dust-holding capacity, allowing for extended service intervals between cleanings.

Built for durability, the filter features a 100% polyurethane top and base that resists heat and chemical degradation. A pliable polyurethane flange with integrated bumps ensures a secure, leak-free seal over the life of the component. Maintenance is straightforward, as the synthetic media can be washed clean with simple soap and water for repeated use.

• Manufacturer Part Number: 21-35009
• Filter Media: 3-Layer Pro DRY S (Oil-Free Synthetic)
• Filtration Efficiency: 99.2%
• Base/Top Material: 100% Polyurethane
• Flange Diameter: 3.5" ID
• Base Diameter: 6" OD
• Top Diameter: 4.75" OD
• Filter Height: 5"

Fits 2006-2013 Chevrolet Corvette C6 models, including Base, Grand Sport, Z06, ZR1, and 427 Limited Edition variants (6.2L).

Upgrade your factory intake with the aFe Power MagnumFLOW OER Pro Dry S air filter. This performance replacement filter (MPN 11-10118) is designed to outflow restrictive paper filters, providing increased airflow for improved horsepower and torque without sacrificing filtration efficiency. The Pro Dry S media features three layers of progressive synthetic material that requires no oil for maximum convenience during service cycles.

Built for durability, the filter is constructed with 100-percent polyurethane on all sides, providing a rigid frame that withstands high engine bay temperatures. The integrated urethane bump seal ensures a precise, leak-free fit within the factory airbox, while the tall, evenly spaced pleats maximize dust-holding capacity to extend the intervals between cleanings.

• Pro Dry S Media: Three-layer oil-free synthetic media for high-flow performance and easy maintenance.
• Washable and Reusable: Designed for multiple cleaning cycles to provide a lifetime of service.
• Precision Construction: 100% polyurethane frame replaces worn OE seals and prevents bypass.
• Direct Fit: Drops into the factory housing as a true OE replacement part.
• MPN: 11-10118

Fits 2000-2009 Honda S2000 (Base and CR models).

The aFe Power MagnumFLOW OER (OE Replacement) air filter is a direct-fit performance upgrade for your 2000-2009 Honda S2000. This filter replaces restrictive factory paper media with three layers of progressive synthetic media (Pro DRY S), designed for maximum convenience and improved airflow without the need for filter oil. The tall, evenly spaced pleats provide a high dust-holding capacity, allowing for longer service intervals while maintaining consistent horsepower and torque gains.

• Pro DRY S Media: Three layers of oil-free synthetic media offer excellent filtration and high airflow for maximum performance.
• Durable Construction: Built with a 100% polyurethane top and bottom frame and an integrated metal flange for structural integrity.
• Perfect Seal: Features a progressive urethane bump seal that compresses for a leak-free fit inside the factory airbox.
• Maintenance: Fully washable and reusable for multiple cleaning cycles; no oiling required.
• Manufacturer Part Number: 11-10065

Fits 2024-2026 Ford Mustang GT and Dark Horse models including GT Premium and Dark Horse Premium.

The aFe Magnum FLOW Pro 5R replacement air filter is designed to provide maximum airflow and filtration efficiency for the S650 chassis. It features five layers of pre-oiled, progressive cotton gauze media, which maintains high flow rates even as the filter accumulates debris. The inverted top design increases the total filter surface area, allowing for longer service intervals compared to standard flat-top filters. This media is ideal for both street performance and track applications where maximum horsepower is the priority.

Constructed with a 100% polyurethane base and top, this filter is built to withstand the high-heat environment of the engine bay without losing its molded shape. The rounded, evenly spaced pleats maximize usable surface area to increase dust-holding capacity and flow consistency. This filter (MPN 10-10407RM) is fully washable and reusable using aFe POWER cleaner and blue filter oil.

• Filter Media: 5-layer Pro 5R oiled cotton gauze for maximum performance
• Increased Surface Area: Inverted top and deep, open pleats maximize flow
• Durable Construction: Heat-resistant 100% polyurethane top and base
• Maintenance: Fully washable and reusable for the life of the vehicle
• Manufacturer Part Number: 10-10407RM

Fits select 2021-2026 Ford Bronco and Ranger (L4-2.3L / V6-2.7L).

This aFe Power Magnum FLOW performance air filter replaces your restrictive factory paper filter with a high-flow, oil-free synthetic alternative. Designed for street and light off-road use, the Pro DRY S media utilizes three layers of progressive synthetic material to achieve high filtration efficiency without the need for recharge oil, simplifying maintenance cycles. The inverted top design increases total filter surface area, extending the interval between cleanings.

The filter is built to withstand the harsh environment of an engine bay using 100% polyurethane for the base and top. This material is chosen for its ability to resist degradation from heat cycles and chemicals, ensuring the filter maintains its original molded shape and sealing integrity over time. The rounded, evenly spaced pleat design optimizes airflow across the entire surface of the media, providing consistent performance and increased dust-holding capacity compared to traditional flat-pleat designs.

• Pro DRY S Media: Three layers of oil-free progressive synthetic media for maximum convenience
• Heavy-Duty Construction: 100% polyurethane base and top for durability and leak-free sealing
• Inverted Top: Maximizes filter surface area for improved flow and service life
• Washable and Reusable: Easily cleaned with aFe POWER CLEANER for repeated service
• Rounded Pleats: Provides more usable surface area and increased dust holding capacity
• Manufacturer Part Number: 10-10401D

The AEM Dryflow 21-202DOSK is a universal clamp-on air filter engineered for high-efficiency filtration and increased airflow without the need for oil. This conical filter utilizes an advanced oil-free synthetic media that simplifies maintenance and eliminates the risk of oil-fouling sensitive mass air flow (MAF) sensors. The integrated filter top design provides additional surface area to maximize air ingestion for custom intake applications.

• Filter Type: Conical Universal Clamp-on
• Filtration Media: Dryflow Oil-Free Synthetic
• Base Outer Diameter: 5.5 in
• Top Outer Diameter: 4.75 in
• Filter Height: 5 in
• Maintenance: Washable and reusable
• Manufacturer Part Number: 21-202DOSK
• Warranty: Limited Lifetime Warranty

Built for durability and long-term service, this washable filter is a direct replacement for enthusiasts looking for a high-performance, easy-to-clean solution. The clamp-on design allows for secure installation on matching intake tube diameters.

The AEM Dryflow 21-201DK air filter is a high-performance synthetic filter designed to increase airflow and engine protection without the need for oiling. Developed in collaboration with K&N, the Dryflow series utilizes a three-dimensional filtering medium that leverages both depth loading and structural screen wire for superior durability and filtration efficiency. This short neck design is ideal for custom intake setups or space-constrained engine bays, providing a washable and reusable alternative to restrictive paper filters.

• Manufacturer Part Number: 21-201DK
• Inlet Diameter: 2.50 in
• Element Height: 5 in
• Filter Media: Non-oiled Synthetic Dryflow
• Construction: Structural screen wire with 3D filtering medium
• Maintenance: Washable and reusable; no oil required
• Warranty: Limited Lifetime Warranty