Fits 2013+ Jaguar F-Type models equipped with the 3.0L Kompressor (Supercharged V6) engine.

This BMC Full Kit provides a direct-fit performance upgrade, replacing the restrictive factory paper air filters with high-flow panel elements. Engineered for precision fitment within the original airbox, these filters utilize a multi-layered filtration media to optimize induction airflow while maintaining superior protection against contaminants.

• Direct drop-in replacement for factory air filters
• Full kit includes both filters required for the Jaguar 3.0L intake system
• One-piece molded polyurethane frame ensures a tight, leak-free seal
• Epoxy-coated alloy mesh protects the filtration media from debris
• Manufacturer Part Number: FB810/20

Fits 2013-2019 Porsche 911 (991) 3.8 Turbo models.

This BMC high-performance replacement panel air filter is engineered to provide significantly higher airflow than the factory paper element, reducing pressure drop and improving engine efficiency. Constructed using a multi-layer cotton gauze media soaked in low-viscosity oil, it captures impurities down to 7 microns without restricting the intake path of the 3.8L flat-six twin-turbocharged engine.

• Precision Engineering: Features a one-piece polyurethane frame molded without welded joints to prevent breakage and ensure a perfect seal in the OE airbox.
• Durable Construction: The filter media is protected by an epoxy-coated alloy mesh, providing resistance against fuel fumes and oxidation.
• Washable and Reusable: Designed for long-term use; the filter can be cleaned and re-oiled using a BMC regeneration kit to maintain peak performance.
• Direct Replacement: Installs into the factory mounting points with no modifications required.
• MPN: FB798/20

Fits 2018-2024 Audi A1 (GB) models equipped with the 2.0L 40 TFSI engine.

The BMC FB756/20 Replacement Panel Air Filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element. This filter is engineered to provide increased airflow and improved engine aspiration compared to standard filters, helping to optimize induction efficiency without compromising filtration standards.

Each filter features a multi-layered cotton gauze media soaked in low-viscosity oil, held between two epoxy-coated aluminum mesh screens. This construction ensures high permeability and captures impurities down to 7 microns. The filter is built using a unique "Full Moulding" system, creating a single-piece frame without welded joints for maximum durability and a precise seal within the OE airbox.

• Manufacturer Part Number: FB756/20
• Construction: Multi-layered cotton gauze with epoxy-coated alloy mesh
• Installation: Direct replacement for the factory air filter
• Maintenance: Fully washable and reusable for the life of the vehicle
• Origin: Designed and manufactured in Italy

Fits 2014-2015 Porsche 911 (991) 3.8 Carrera GTS.

The BMC FB709/01 Replacement Panel Air Filter Full Kit is a high-performance intake upgrade designed to replace the restrictive factory paper filters in your 991-generation Porsche. Utilizing a multi-layered cotton gauze media soaked in low-viscosity oil and supported by epoxy-coated alloy mesh, this kit provides a significant increase in airflow while maintaining filtration efficiency down to 7 microns.

• Direct replacement for factory air filters (includes full kit requirements)
• Multi-layered cotton gauze media for increased airflow and protection
• Epoxy-coated alloy mesh construction resists fuel vapors and oxidation
• Washable and reusable for a lifetime of performance
• High-precision molding ensures a leak-free seal in the factory airbox
• Manufacturer Part Number: FB709/01

Fits 2017 BMW 3 Series (F30/F31/F80) M3 CS.

The BMC FB647/20 Replacement Panel Air Filter Kit provides a high-performance alternative to standard paper filters. Designed specifically for the 2017 BMW M3 CS, this full kit ensures optimal airflow while maintaining superior filtration to protect your engine from harmful contaminants. BMC filters are engineered using a multi-layered cotton gauze media soaked in low-viscosity oil, secured between epoxy-coated alloy meshes for maximum structural integrity and corrosion resistance.

• Direct drop-in replacement for factory air filters into the original airbox.
• Enhanced airflow compared to OEM paper elements for improved induction efficiency.
• Washable and reusable design ensures a long-term service life.
• Precision-molded rubber frame provides a tight, leak-free seal.
• Manufacturer Part Number: FB647/20

Fits 2003-2005 Lamborghini Gallardo models equipped with the 5.0L V10 engine.

Enhance your engine's induction efficiency with the BMC high-performance replacement panel air filter kit. These filters are designed to drop directly into the factory airbox, replacing restrictive OEM paper elements with multi-layered, low-viscosity oiled cotton gauze. This construction allows for a significantly higher volume of airflow into the intake while maintaining superior filtration levels to protect internal engine components.

Each filter is built with an epoxy-coated alloy mesh to ensure structural stability against high pressure and protection from fuel fumes and oxidation. As a washable and reusable solution, this kit provides a lifetime of service with proper maintenance, eliminating the need for frequent disposable filter replacements. This is a full kit containing both filters required for the Gallardo V10 airbox.

• Direct drop-in replacement for factory air filters
• Multi-layered cotton gauze media for maximum airflow
• Washable and reusable design for extended service life
• Epoxy-coated alloy mesh for reinforced durability
• Manufacturer Part Number: FB523/03

Fits 2007-2010 Mercedes-Benz CL 63 AMG.

The BMC FB521/20 replacement panel filter is a high-performance drop-in upgrade designed to improve induction efficiency and engine protection. Engineered to replace the standard factory paper element, this filter utilizes multi-layered cotton gauze to provide a larger surface area for airflow while trapping impurities as small as 7 microns.

• Direct replacement for the OEM air filter
• Constructed with epoxy-coated alloy mesh for structural integrity
• Washable and reusable for extended service life
• Optimized for increased airflow and consistent power delivery
• Manufacturer Part Number: FB521/20

Note: This vehicle requires two (2) filters for a full replacement change.

Fits 2001-2003 Porsche 911 (996) GT2 (3.6L).

The BMC FB195/01 high-performance replacement panel air filter is engineered to provide superior airflow compared to standard paper filters. By utilizing a multi-layer cotton gauze media soaked in low-viscosity oil, this filter captures smaller impurities while reducing pressure drop across the intake system. This design allows the 3.6L flat-six engine to breathe more efficiently without compromising engine protection.

• Direct drop-in replacement for the factory air box
• Multi-layer cotton gauze media for high-flow filtration efficiency
• Epoxy-coated alloy mesh construction to resist fuel vapors and oxidation
• One-piece molded design ensures a perfect seal and long-term durability
• Washable and reusable for extended service life
• Manufacturer Part Number: FB195/01

Fits 1996-1999 Porsche Boxster and Boxster S (2.5L).

This BMC Replacement Panel Air Filter is a high-performance drop-in upgrade designed to replace your vehicle's restrictive factory paper filter. Developed using technology from Formula 1 and endurance racing, BMC filters provide significantly higher airflow while maintaining superior filtration efficiency to protect your engine from contaminants as small as 7 microns.

Constructed with a multi-layered cotton gauze soaked in low-viscosity oil, the filter media is sandwiched between two epoxy-coated alloy mesh screens. This design ensures structural integrity even under high pressure and allows the filter to be washed and regenerated for the life of the vehicle, reducing waste and maintaining peak performance.

• Direct replacement for the original equipment (OE) filter
• High-flow cotton gauze media increases engine aspiration
• Epoxy-coated alloy mesh protects against fuel fumes and oxidation
• Washable and reusable using BMC cleaning kits
• Manufacturer Part Number: FB140/01

Fits 2022-2024 Ford Ranger and Bronco Raptor models (3.0L V6 EcoBoost).

The BMC FB01173 is a high-performance replacement panel air filter engineered to improve intake efficiency over the restrictive factory paper element. Designed as a direct drop-in for the OE airbox, this filter utilizes a multi-layered cotton gauze media treated with low-viscosity oil to capture contaminants as small as 7 microns while allowing for increased airflow to the 3.0L EcoBoost engine.

• Direct OE replacement for a precise fit in the factory airbox
• Washable and reusable design for long-term serviceability
• Multi-layered cotton gauze protected by epoxy-coated alloy mesh
• Maintains consistent air pressure for improved engine responsiveness
• Manufacturer Part Number: FB01173

Fits 2021-2024 BMW M3 (G80) and M4 (G82) models.

This BMC replacement panel air filter (MPN: FB01118) is designed as a direct drop-in performance upgrade for the factory intake system. Engineered to provide higher airflow than standard paper filters, it utilizes multi-layered cotton gauze media to ensure maximum air delivery to the engine while maintaining superior filtration efficiency for internal component protection.

• Direct replacement for factory OEM panel filters
• High-flow cotton gauze media for improved engine breathing
• Washable and reusable for extended service life
• Precise fitment ensures a tight seal within the factory airbox
• Manufacturer Part Number: FB01118

Fits 2019 and newer Land Rover Defender (L663) models.

The BMC FB01111 replacement panel air filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element. Engineered using the same technology found in Formula 1 intake systems, this filter features a multi-layered cotton filtration media soaked with low-viscosity oil to capture impurities while maximizing airflow to the engine.

Constructed with an epoxy-coated alloy mesh, the filter ensures protection from petrol fumes and oxidation while maintaining structural integrity under high-pressure intake conditions. The one-piece molding process ensures a perfect seal within the factory airbox, preventing unfiltered air from bypassing the media.

• Direct OE replacement (replaces manufacturer part number FB01111)
• Multi-layer cotton gauze media for increased airflow and superior filtration
• Washable and reusable for an extended service life
• Epoxy-coated alloy mesh prevents corrosion and oxidation
• Fits into the original equipment airbox without modification

Fits 2020+ Porsche Macan Turbo and GTS models equipped with the 2.9L Twin-Turbo engine.

The BMC FB01098 replacement panel air filter is a high-performance drop-in upgrade designed to replace the restrictive factory paper element in your Macan. Built to the same standards as BMC's championship-winning Formula 1 and endurance racing filters, this unit provides a higher volume of airflow without compromising filtration efficiency. The multi-layered cotton gauze media, soaked in low-viscosity oil, captures impurities as small as 7 microns to protect your 2.9TT engine from harmful contaminants.

• Direct OE replacement (Part # FB01098) for factory mounting points
• High-flow cotton gauze media improves engine responsiveness and airflow
• Epoxy-coated alloy mesh protects against fuel vapors and oxidation
• Full-molded construction ensures a leak-free seal within the factory airbox
• Washable and reusable for long-term service life
• Engineered specifically for the 2.9L V6 Twin-Turbo platform

Fits 2018-2024 Audi Q7 and Q8 (4M) models (3.0L TDI).

The BMC FB01060 is a high-performance drop-in replacement air filter engineered to improve airflow and filtration efficiency over the factory paper element. Designed using F1-derived technology, this panel filter utilizes a multi-layered cotton gauze media soaked in low-viscosity oil to capture impurities as small as 7 microns. The filter is reinforced with an epoxy-coated alloy mesh to ensure structural stability under high-pressure intake conditions.

• Direct replacement for the OEM air filter; bolts directly into the factory airbox.
• Single-piece polyurethane molding eliminates welded joints for increased durability and a perfect seal.
• Washable and reusable design ensures a lifetime of service with regular maintenance using BMC cleaning kits.
• Optimized for a higher airflow rate than standard paper filters, reducing pressure drop.
• Manufacturer Part Number: FB01060

Fits select 2019-2024 Toyota Supra GR (3.0L) and BMW 330i models.

The BMC FB01054 high-performance replacement air filter is designed to improve airflow and engine efficiency compared to restrictive factory paper elements. Constructed with a multi-layered cotton gauze media soaked in low-viscosity oil, this filter captures contaminants down to 7 microns while maintaining a high flow rate for better combustion responsiveness.

• Precision Engineering: Features a one-piece molding with a red polyurethane frame for a perfect seal in the factory airbox, preventing unfiltered air bypass.
• Durable Construction: The filter media is reinforced with an epoxy-coated alloy mesh to resist fuel fumes and oxidation.
• Sustainability: Fully washable and reusable with a BMC cleaning kit, providing a lifetime of service without needing replacement.
• Direct OE Replacement: Drops into the factory housing with no modifications; compatible with original engine management sensors.
• Manufacturer Part Number: FB01054

The K&N Drycharger RF-1042DK is a specialized, silicone-treated polyester wrap designed to protect your intake system from moisture and debris without sacrificing performance. Engineered for both automotive air filters and Personal Watercraft (PWC) flame arrestors, this pre-filter adds a crucial layer of defense in damp or dusty environments.

• Water Repellent: The silicone-treated polyester material repels water splashes, helping to prevent filter saturation and moisture ingestion.
• High Airflow: Uniform micron-sized openings are designed to maintain high-volume airflow while capturing larger contaminants.
• Durable Protection: The water-repellent treatment is built for longevity, typically lasting between 1 to 2 years depending on driving conditions.
• Versatile Application: Fits specific K&N air filters and flame arrestors; serves as a direct upgrade to standard Prechargers when moisture resistance is required.
• Manufacturer Part Number: RF-1042DK

Fits 2021-2024 Ram 1500 TRX and TRX Launch Edition (6.2L V8).

The K&N 33-5115 replacement air filter is a performance upgrade designed to drop directly into the factory air box of your supercharged Ram 1500. Featuring a state-of-the-art design of layered, oiled cotton media, this filter is engineered to improve airflow and capture contaminants more efficiently than traditional disposable paper filters.

Built for the long haul, this filter is washable and reusable, designed to last the entire lifespan of your vehicle. It provides a sustainable alternative to single-use filters, reducing landfill waste while maintaining high-performance filtration standards. Each filter comes pre-oiled and ready to install with no modifications required.

• High-flow oiled cotton media for improved engine breathing
• Washable and reusable design saves money and reduces waste
• Precise fitment for factory air boxes
• Manufacturer Part Number: 33-5115
• Backed by K&N No-Hassle Lifetime Limited Warranty

Fits select 2018-2025 Jeep Wrangler (JL) and Gladiator (JT) models (I4-2.0L / L4-2.0L / V6-3.6L).

The aFe Power Magnum FLOW PRO DRY S Inverted Air Filter is a high-performance, drop-in replacement for your Jeep's restrictive factory paper filter. This filter features a unique inverted top design that increases the available surface area, providing higher airflow and greater dust-holding capacity for extended service intervals. The 100% polyurethane frame ensures a precise, leak-free seal within the factory air box for the life of the vehicle.

Equipped with Pro DRY S media, this filter utilizes three layers of oil-free synthetic material. This design provides maximum convenience by allowing you to clean and reuse the filter without the need for specialized oils, protecting sensitive Mass Air Flow (MAF) sensors from contamination while maintaining high filtration efficiency.

• Manufacturer Part Number: 31-80280
• Media Type: Pro DRY S (Oil-Free, 3-Layer Synthetic)
• Design: Inverted Top Replacement Filter (IRF) for increased flow
• Washable: Yes, fully reusable and easy to service
• Installation: Direct drop-in fit into OE air housing

Fits select 2006-2013 BMW 128i, 325i/xi, 328i/xi, 330i/xi/Ci, and 335i/xDrive (L6-3.0L).

Upgrade your BMW's intake efficiency with the aFe MagnumFLOW OER (Original Equipment Replacement) air filter. This Pro DRY S filter is engineered to outperform restrictive factory paper filters, providing increased airflow for improved throttle response while maintaining superior filtration levels. The oil-free design simplifies maintenance, allowing you to wash and reuse the filter without the need for specialized recharging oils.

Constructed with a 100% polyurethane frame on all sides, this filter is built for durability and heat resistance, preventing the warping and cracking common with lesser designs. The integrated progressive bump seal ensures a perfect, leak-free fit inside the factory airbox, forcing air through the three layers of progressive synthetic media for maximum dust-holding capacity and engine protection.

• Pro DRY S Media: 3-layer progressive synthetic dry media offers maximum convenience with no oiling required.
• Washable and Reusable: Designed for multiple cleaning cycles to provide years of service.
• Durable Construction: 100% polyurethane frame maintains its shape and seal for the life of the filter.
• Progressive Bump Seal: Provides a tight, tool-free seal against the factory housing to prevent debris bypass.
• Part Number: 31-10131

The aFe MagnumFLOW Pro DRY S air filter (MPN 21-45505) is a high-flow, conical performance filter designed for maximum convenience and maintenance-free operation. Utilizing three layers of progressively finer mesh synthetic media, this oil-free filter provides excellent airflow while maintaining a 99.2% filtration efficiency rating. Its washable and reusable design allows for multiple cleaning cycles using only soap and water.

Built for durability, the filter features a 100% polyurethane top and base for a long service life. The pliable polyurethane flange is engineered with integrated bumps to ensure a tight, leak-free seal against the intake housing. The tall, evenly spaced pleats increase surface area, providing high dust-holding capacity and extending the service interval between cleanings.

• Filter Media: 3-layer oil-free Pro DRY S synthetic media
• Efficiency: 99.2% filtration rating
• Dimensions: 4-1/2" Flange x 6" Base x 4-3/4" Top x 5" Height
• Construction: 100% polyurethane frame and integrated seal bumps
• Maintenance: Washable and reusable; no oiling required
• Part Number: 21-45505

The Spectre HPR (High Performance Racing) Universal Conical Air Filter is engineered to increase airflow and performance compared to restrictive paper filters. This factory pre-oiled filter is ready to install and designed for custom intake systems or as a high-flow replacement for applications requiring a 6-inch mounting flange.

Constructed with washable synthetic filter media and steel mesh reinforcement, the HPR9606 provides excellent filtration and durability. The clamp-on design and urethane construction ensure a secure seal on the intake tube, while the triple chrome plated steel top provides a professional finish under the hood. This filter is fully washable and reusable, offering a long-term solution for performance induction needs.

• Part Number: HPR9606
• Flange Inside Diameter: 6.0 in (152 mm)
• Base Outside Diameter: 7.219 in (183 mm)
• Top Outside Diameter: 3.906 in (99 mm)
• Total Height: 5.719 in (145 mm)
• Filter Media: Washable synthetic
• Style: Universal clamp-on conical filter

The K&N Universal Clamp-On Air Filter (RA-0500) is engineered for versatile performance across a wide range of applications, including racing vehicles, custom intakes, generators, snowmobiles, and tractors. Designed for durability and high airflow, this filter features a high-strength, molded pliable rubber flange that absorbs engine vibration for a secure, leak-free seal. The flexible flange construction allows it to be stretched up to 1/16 of an inch (1.5mm) to accommodate varied intake pipe diameters.

• Manufacturer Part Number: RA-0500
• Flange Inside Diameter: 2-1/16 in (52 mm)
• Outside Diameter: 3-1/2 in (89 mm)
• Filter Height: 4 in (102 mm)
• Construction: Pliable molded rubber flange with pleated media
• Maintenance: Fully washable and reusable
• Warranty: 1-Year Limited Warranty

Fits select 2018-2026 Mercedes-Benz G550, GLE580, GLS580, Maybach S580, S560, and S580 models.

The K&N 33-3183 High-Flow Air Filter is a performance-oriented drop-in replacement designed to optimize airflow and filtration for Mercedes-Benz luxury sedans and SUVs. Built with multiple layers of premium oiled cotton media, this filter replaces the restrictive factory paper element, allowing for improved engine breathability while maintaining strict filtration standards to protect internal engine components. As a direct-fit replacement, it installs easily into the factory air box without modifications.

• High-flow, layered oiled cotton media provides superior airflow and filtration efficiency
• Direct drop-in design replaces OE air filter in the factory housing
• Washable and reusable construction engineered for the lifespan of the vehicle
• Reduces environmental waste compared to disposable paper filters
• Precision-molded frame ensures a secure, leak-free seal within the air box
• Manufacturer Part Number: 33-3183

Fits select 2023-2026 Lexus and Toyota models including RX500h, TX500h, TX550h+, Crown, and Grand Highlander (L3-1.0L).

The K&N 33-3179 High-Flow Air Filter is engineered to improve engine performance by increasing airflow while maintaining critical filtration standards. Utilizing K&N's signature layered, oiled cotton media, this drop-in replacement captures contaminants effectively while providing a less restrictive path for air compared to traditional paper filters. Designed to install directly into your factory air box, this filter offers a simple performance upgrade without requiring permanent modifications.

Built for the long haul, this washable and reusable filter is backed by K&N’s No-Hassle Lifetime Limited Warranty, making it a sustainable and cost-effective alternative to disposable filters. This filter ensures your engine breathes better while remaining protected by high-quality filtration media.

• Manufacturer Part Number: 33-3179
• Media Material: Layered, oiled cotton gauze
• Installation: Direct drop-in replacement for OE housing
• Maintenance: Washable and reusable for the life of the vehicle
• Warranty: K&N No-Hassle Lifetime Limited Warranty

Vehicle Fitment:

• 2025 Lexus RX500h Black Line Special Edition
• 2023, 2025 Lexus RX500h F Sport Performance
• 2024 Lexus RX500h F Sport Performance Premium
• 2024-2025 Lexus TX500h F Sport Performance Luxury
• 2024-2026 Lexus TX500h F Sport Performance Premium
• 2024-2026 Lexus TX550h+ Luxury
• 2023-2026 Toyota Crown Platinum
• 2024-2026 Toyota Grand Highlander Hybrid Limited
• 2026 Toyota Grand Highlander Hybrid Nightshade
• 2024-2026 Toyota Grand Highlander Hybrid Platinum

Fits select 2007-2015 Mercedes-Benz E320, E350, GL320, GL350, ML320, ML350, R320, and R350 (3.0L).

K&N washable, reusable High-Flow Air Filters feature a performance-oriented design of layered, oiled cotton media engineered to improve airflow and capture contaminants more effectively than traditional paper filters. These drop-in replacement filters are designed to install easily into your factory air box, providing a sustainable and performance-driven upgrade for your Mercedes-Benz diesel engine.

Each filter is engineered to last for the entire lifespan of your vehicle and is backed by K&N's 10-Year/Million Mile Limited Warranty. By choosing a reusable filter, you reduce the waste associated with disposable filters while maintaining high filtration standards and engine protection.

• Manufacturer Part Number: 33-2940
• Quantity: 2 Filters per box
• Filter Material: Oiled Cotton Gauze
• Fitment Type: Direct OE Replacement
• Maintenance: Washable and reusable for the life of the vehicle
• Warranty: 10-Year/Million Mile Limited Warranty

Fits select 2011-2020 Mercedes-Benz CL, CLS, E, G, GL, GLE, GLS, ML, S, and SL-Class models.

This K&N 33-2474 replacement air filter set is engineered to improve airflow and capture contaminants using a state-of-the-art layered, oiled cotton media. Designed as a direct drop-in replacement for your factory air box, these high-flow filters provide an increase in horsepower and torque by reducing airflow restriction. Unlike disposable paper filters, K&N filters are washable, reusable, and built to last the entire lifespan of your vehicle.

• Includes two (2) high-flow air filters
• Washable and reusable oiled cotton media
• Direct fit into factory air box for easy installation
• Reduces environmental waste from disposable filters
• Backed by K&N 10-Year/Million Mile Limited Warranty

Technical Specifications:

• Manufacturer Part Number: 33-2474
• Length (Outside): 12.563 in
• Width (Outside): 5.25 in
• Height: 1.625 in
• Filter Material: Oiled Cotton Gauze

Fits 2010-2018 Ford Mustang Shelby GT350, GT350R, and GT500.

This Ford Racing high-flow air filter element (M-9601-G) is the same unit used in Ford Racing cold air induction kits, designed to optimize intake efficiency without the maintenance hassle of oiled filters. Engineered with multi-layer cotton gauze, it provides superior filtration while significantly reducing air restriction compared to standard factory paper elements. The oil-free design ensures your MAF sensors remain free of contamination, while the blue filter media adds a distinct look to your engine bay.

• Manufacturer Part Number: M-9601-G
• High-flow multi-layer cotton gauze construction
• Oil-free maintenance: wash with mild detergent, rinse, and air dry
• Fully cleanable and reusable for extended service life
• Precision hand-built using high-grade materials
• Direct replacement for filters in Ford Racing induction kits
• Blue color media
• Made in the USA

This do88 Secondary Air Injection (SAI) Air Filter Kit is an essential upgrade for VAG owners running aftermarket intake systems on 1.8T or 2.0T EA888 engines. When the factory airbox is removed, the SAI pump hose is often left exposed; this kit provides a dedicated, high-flow filtration solution to prevent dust and debris from entering the pump and causing premature system failure.

Built to handle the demands of a performance engine bay, the kit features a cleanable and reusable filter element designed for long-term durability. It allows for a clean, professional-looking installation while maintaining the functional integrity of your vehicle's emissions and cold-start systems.

• Engine Compatibility: VAG 1.8T and 2.0T EA888
• Application: Secondary Air Injection (SAI) filtration for vehicles with aftermarket intakes
• Filter Media: High-flow, washable, and reusable design
• Hardware Included: Filter and necessary mounting components
• Manufacturer Part Number: LF-190-SAI-KIT

Fits 2014-2015 Ford Fiesta ST.

The Cobb Stage 1 Power Package is the premier entry-level tuning solution for the Fiesta ST platform, designed to improve engine efficiency and power delivery without requiring extensive mechanical modifications. By combining the industry-leading Accessport V3 handheld programmer with a high-flow intake upgrade, this kit provides a calibrated path to increased torque and horsepower while maintaining factory-like drivability.

• Accessport V3: Features a high-resolution screen, customizable multi-gauge display, and pre-loaded Stage 1 Off-The-Shelf (OTS) maps for immediate performance gains.
• High-Flow Filtration: Includes a washable, reusable air filter designed to increase airflow into the turbocharger while maintaining superior filtration standards.
• Plug-and-Play: Simple installation that requires no permanent vehicle modifications; allows for easy reverting to stock settings if needed.
• Manufacturer Part Number: 62FX11

The BMC FB986/20 Replacement Panel Air Filter is a high-performance drop-in solution designed for the 2018 Porsche Panamera II (971) (2.9L). Engineered to replace the restrictive factory paper element, this filter utilizes multi-layered cotton gauze soaked in low-viscosity oil to capture impurities while significantly improving airflow for better engine response.

• Direct Fit: Designed to install directly into the OEM airbox with no modifications required.
• Advanced Media: Features multi-layered cotton filtration media protected by an epoxied alloy mesh to resist fuel vapors and oxidation.
• Reusable Design: Fully washable and regenerable using BMC cleaning kits, eliminating the need for disposable paper filters.
• F1 Heritage: Manufactured to the same exacting standards BMC uses for its Formula 1 and endurance racing partners.
• MPN: FB986/20