Fits select 2001-2024 Lexus GX460, GX470 and Toyota 4Runner, FJ Cruiser, and Sequoia.

Over time, parking brake hardware loses its tension due to heat cycles and corrosion, leading to dragging shoes or inconsistent engagement. This DFC Parking Brake Drum Brake Hardware Kit includes the necessary springs, pins, and clips to restore original equipment (OE) braking performance and tension. Sold as a complete axle kit, it provides all required components to service both the driver and passenger sides of the vehicle.

• Complete axle kit services both sides of the rear parking brake system
• Manufactured with premium materials for long-term tension and corrosion resistance
• Reduces noise, vibration, and harshness (NVH) during engagement
• Minimizes brake drag to improve fuel efficiency and prevent premature shoe wear
• Direct replacement for worn factory hardware to ensure consistent parking brake holding power

Fits select 1987-2015 Lexus and Toyota models including GS300/400/430, IS300, LS400, RX330/350/400h, SC300/400/430, Highlander, Previa, RAV4, Sienna, Supra, and Venza.

Restore the reliability and safety of your emergency brake system with the DFC Parking Brake Drum Hardware Kit. Over time, heat cycles and environmental exposure fatigue the return springs and pins, leading to dragging shoes, inconsistent engagement, or unwanted noise. This kit replaces those worn components to ensure the parking brake shoes retract fully and stay properly aligned within the drum.

• Complete Axle Kit: Sold as a full set containing the necessary hardware to service both the left and right rear assemblies.
• Premium Materials: Manufactured using high-quality metals to maintain consistent spring tension and resist corrosion for long-term durability.
• Reduces Drag: Ensures proper shoe retraction, which minimizes friction, improves fuel efficiency, and prevents premature wear on brake linings.
• Quiet Performance: Engineered to eliminate the chatter and vibration often associated with aged or weak hardware.
• Direct Replacement: Designed to meet factory specifications for a precise fit into the original parking brake housing.

Fits 1984-2004 Toyota Pickup and Tacoma models, including Base, DLX, SR5, SR5 Turbo, Pre Runner, and S-Runner.

This DFC Rear Drum Brake Hardware Kit provides the essential components required to restore consistent braking performance and ensure proper shoe alignment on your Toyota truck. Over time, heat cycles and corrosion fatigue the return springs and pins in your drum system, leading to shoe drag, uneven wear, and excessive operational noise. Replacing your hardware whenever you service your brake shoes is critical for maintaining system efficiency and safety.

• Manufactured using premium materials for maximum durability and heat resistance
• Sold as a complete axle kit, providing enough hardware for both the driver and passenger side rear wheels
• Engineered to minimize drag and improve fuel efficiency by ensuring proper shoe retraction
• Reduces operational noise and vibration for smoother, quieter stops
• Prevents premature wear on new brake shoes and drums by maintaining correct component tension

Fits select 1973-2024 Mercedes-Benz, Dodge, and Freightliner Sprinter (2500/3500) and 1973-1975 Mercury Montego.

The DFC 73-24 parking brake hardware kit is designed to restore proper tension and alignment to your vehicle's rear drum-style parking brake system. Over time, heat cycles and corrosion fatigue factory return springs, pins, and clips, leading to dragging shoes, uneven wear, or parking brake failure. This kit replaces those fatigued components to ensure consistent shoe engagement and a clean release, which minimizes parasitic drag and improves fuel efficiency.

• Manufactured using premium materials for maximum service life and heat resistance
• Reduces noise, vibration, and harshness during brake application
• Ensures even shoe return to prevent premature lining wear
• Complete axle kit includes hardware for both the driver and passenger sides
• Engineered for precise fitment with factory backing plates and shoes
• Manufacturer Part Number: 73-24

Fits 2008-2015 Smart Fortwo (Brabus, Electric Drive, Passion, Passion Cabrio, and Pure).

This DFC Rear Drum Brake Hardware Kit is engineered to restore the factory-level performance and safety of your vehicle's drum brake system. Over time, heat cycles and environmental exposure weaken return springs and hold-down pins, leading to uneven shoe wear and increased operating noise. Replacing these components during every brake shoe service ensures consistent shoe return, prevents premature wear, and maintains optimal pedal feel.

• Sold as a complete axle kit for both rear wheels.
• Restores proper tension to brake shoe return springs to prevent dragging.
• Minimizes friction and drag to improve fuel and energy efficiency.
• Reduces operating noise and vibration for quieter braking.
• Manufactured using premium materials for long-term durability and consistent performance.

Vehicle Fitment:

Fits select 1997-2022 Ford Expedition, F-150, F-150 Heritage, F-250/HD, F-250 Super Duty, Lincoln Navigator, Blackwood, and Mark LT.

The DFC Parking Brake Drum Brake Hardware Kit provides the necessary components to restore the performance and reliability of your vehicle's parking brake system. Over time, heat cycles and road debris can weaken return springs and corrode hold-down pins, causing the parking brake shoes to drag or fail to engage properly. This kit replaces those fatigued components with precision-engineered hardware to ensure the assembly operates smoothly and releases completely.

• Complete Axle Kit: Contains all required hardware to service both the left and right sides of the vehicle.
• Premium Construction: Manufactured using high-grade materials to withstand extreme temperatures and environmental exposure.
• Optimized Performance: Prevents premature shoe wear and minimizes drag, helping to maintain fuel efficiency and extend brake life.
• Noise Reduction: Designed to eliminate vibration and chatter within the drum assembly for quieter operation.

Fits 2005-2025 Coachmen Pursuit. This DFC Parking Drum Brake Hardware Kit is engineered to restore the reliable operation of your vehicle's parking brake system. Over time, the internal return springs, pins, and clips suffer from heat fatigue and corrosion, leading to dragging shoes or failure to hold on inclines. This kit provides a comprehensive refresh of the critical tensioning components to ensure consistent performance.

• Complete axle kit includes necessary hardware for both the driver and passenger sides
• Engineered with high-tensile materials to resist heat-cycling and fatigue
• Maintains proper shoe-to-drum clearance to reduce noise and vibration
• Prevents premature brake shoe wear by ensuring positive retraction when disengaged
• Minimizes drag to help maintain fuel efficiency and prevent overheating

Fits select 1960-1972 Ford and Mercury vehicles, including Mustang, Falcon, Torino, Comet, and Cougar. This DFC Drum Brake Hardware Kit is designed to restore consistent braking performance and eliminate the noise associated with worn or fatigued components. Over thousands of miles, heat cycles and road grime weaken the springs and pins that hold your brake shoes in place, leading to uneven shoe wear, excessive drag, and poor pedal response.

By replacing old, stretched hardware with these premium components, you ensure that your brake shoes return properly and maintain the correct tension against the drum. This prevents premature wear on your shoes and improves fuel efficiency by minimizing parasitic drag. Each kit is manufactured using high-grade materials to withstand the high temperatures and corrosive environments found inside the brake assembly.

• Prevents premature shoe wear for longer brake life
• Minimizes drag to improve fuel efficiency and reduce heat buildup
• Reduces operating noise and vibration
• Sold as a complete axle kit to service both sides of the vehicle
• Manufactured using premium materials for longevity and consistent performance

Fits select 1999-2014 Chevrolet Silverado/Sierra 1500, Tahoe, Yukon, Suburban, Express/Savana 1500, and Cadillac Escalade models. This DFC Drum Brake Hardware Kit provides everything needed to restore proper operation to your vehicle's parking brake system.

Over time, parking brake hardware is subjected to heat cycles, moisture, and debris, causing return springs to lose tension and mounting pins to corrode. This kit replaces those fatigued components to ensure the brake shoes retract fully when released and engage firmly when the pedal is depressed. By maintaining correct shoe alignment, this hardware prevents premature friction wear and minimizes drag for improved fuel efficiency.

• Complete axle kit includes necessary hardware to service both sides of the vehicle
• Manufactured from premium materials to resist heat fatigue and environmental corrosion
• Restores proper spring tension to reduce noise, vibration, and dragging
• Direct-fit design ensures easy installation into factory mounting points
• Helps extend the life of your parking brake shoes and drums

Fits 2012-2017 Chevrolet Equinox and GMC Terrain.

Restore the safety and reliability of your vehicle's parking brake system with this DFC Parking Brake Drum Brake Hardware Kit. Over time, heat cycles and road debris cause original springs and clips to lose tension or corrode, leading to shoe drag, excessive heat, and poor engagement. This kit provides a complete set of high-quality hardware to replace worn OE components, ensuring consistent tension and proper shoe alignment within the drum-in-hat system.

• Complete Axle Kit: Provides all necessary springs, pins, and clips to service both the driver and passenger sides of the vehicle.
• Prevents Drag: Restores the spring tension required to fully retract the parking brake shoes, preventing premature wear and protecting fuel efficiency.
• Quiet Operation: Precision-engineered components dampen vibration and eliminate clicking or grinding noises during engagement.
• Premium Materials: Manufactured from corrosion-resistant materials designed to withstand high temperatures and harsh under-car environments.

Fits select 1953-1964 Chevrolet and GMC models, including Corvette, Bel Air, Impala, and P10/C10/K10 series trucks.

Maintaining your classic vehicle's braking performance requires more than just new shoes; the hardware responsible for shoe tension and alignment is a critical safety component. This DFC Rear Drum Brake Hardware Kit replaces heat-fatigued or corroded springs, pins, and clips that lose their tension over time. By restoring proper shoe return and positioning, this kit eliminates brake drag, reduces excessive noise and vibration, and prevents premature lining wear.

• Full Axle Coverage: Sold as a complete kit for both the driver and passenger side rear drums.
• Premium Materials: Engineered to withstand high thermal loads and resist corrosion for long-term reliability.
• Improved Efficiency: Ensures shoes retract fully to minimize drag and improve fuel economy.
• Quiet Operation: Precision-manufactured components reduce chatter and pedal pulsation.
• Fitment Reliability: Replaces worn OE hardware to restore factory-spec braking performance.

Fits select 1965-1970 Cadillac, Checker, Oldsmobile, and Pontiac models (including Eldorado, Toronado, Bonneville, and Delta 88).

A complete brake service requires more than just new shoes; the hardware is critical for safe and consistent stopping power. This DFC Front Drum Brake Hardware Kit provides the necessary springs, pins, and clips to restore your vehicle's braking system to factory-level performance. Over thousands of heat cycles, original equipment springs lose their tension, which can lead to shoe drag, excessive heat buildup, and premature lining wear. Replacing these worn components ensures proper shoe return and alignment.

• Complete Axle Set: Includes all required components to service both the driver and passenger side front drum brakes.
• Heat-Resistant Materials: Manufactured from premium materials designed to maintain tension and resist fatigue even under heavy braking conditions.
• Reduced Drag: Restores proper shoe-to-drum clearance to improve fuel efficiency and extend the life of your brake components.
• Noise Suppression: Maintains correct component tension to eliminate chatter, vibration, and annoying brake noise.
• Direct Fit: Engineered to match the dimensions and tolerances of the original hardware for a straightforward installation.

Fits 2015-2019 Ford Transit-150.

The DFC Right Rear Brake Hub Bolt Kit provides high-strength replacement hardware essential for securing the hub assembly to the axle flange. Because brake hub bolts are critical fasteners subject to high torque and environmental exposure, they can often become corroded, stretched, or damaged during removal. Replacing these bolts during hub or bearing service ensures proper clamping force and maintains the structural integrity of the drivetrain and braking system.

• Direct-fit replacement for factory right rear brake hub hardware
• Manufactured to meet or exceed OE specifications for strength and durability
• Essential for ensuring a secure, professional-grade hub installation
• Helps prevent bolt failure or loosening caused by reusing fatigued hardware

Fits 2000-2012 Ford Focus.

Maintain the structural integrity of your rear hub assembly with this DFC Left Rear Bearing Nut. Designed as a direct replacement for the factory fastener, this nut ensures the wheel hub remains securely seated on the spindle, maintaining the necessary clamping force for safe operation. Because most wheel bearing nuts are engineered with locking features or specific deformation properties that are compromised during removal, professional service standards dictate replacement during any hub or bearing installation to prevent loosening or premature bearing failure.

• Position: Left Rear
• Engineered to match OE thread pitch and material strength for reliable torque retention
• Critical for maintaining proper wheel bearing preload
• Provides secure hub-to-spindle attachment for improved vehicle safety

Secure your braking system with genuine Brembo caliper mounting hardware, the critical link between your calipers and the vehicle chassis or fork. These precision fasteners are engineered to maintain exact caliper alignment and handle the extreme shear forces generated during high-torque braking events. Using the correct mounting hardware is essential to prevent vibration-induced loosening and ensure even pad-to-rotor contact.

• Manufactured to precise tensile strength and thread pitch specifications.
• Engineered to withstand high thermal loads without losing clamping force.
• Corrosion-resistant coating ensures long-term serviceability and easy removal.
• Essential for routine brake service, caliper upgrades, or replacing stretched OE fasteners.
• Maintains critical component geometry for consistent mechanical performance.

Maintain the hydraulic integrity and safety of your braking system with genuine Brembo master cylinder mounting hardware. These replacement fasteners and service components are engineered to the exact tolerances required for Brembo master cylinders, ensuring a secure attachment to the clip-ons or handlebars. Using genuine hardware is critical for preserving a firm, consistent lever feel and preventing vibration-induced loosening at the master cylinder pivot or mounting points.

• Genuine Brembo replacement service components
• Engineered for precise fitment and total system integrity
• Ensures reliable mounting for high-performance hydraulic master cylinders
• Maintains original equipment safety and performance standards

This Brembo Hardware Pack is engineered for the precise assembly and maintenance of high-performance multi-piece brake rotors. Designed specifically for 365x34mm and 380x34mm rotor sizes, this kit provides the critical fasteners required to secure the rotor ring to the bell or hat assembly. This is an essential service component for maintaining the structural integrity and thermal expansion performance of your braking system.

As a partial hardware kit, it includes the high-strength bolts and washers needed for a hardware refresh but does not include the bushings. This kit is ideal for professional brake service where existing bushings are within specification or are being sourced separately for a custom application.

• Compatible with Brembo 365x34mm and 380x34mm multi-piece rotors
• Partial kit configuration (bushings not included)
• Engineered for high-torque applications and thermal cycling
• Direct replacement for one-time-use assembly hardware
• Ensures proper rotor-to-hat mating for track and street use

Maintain the integrity of your braking system with a genuine Brembo 44mm dust boot. This critical component serves as the primary barrier between the caliper piston and the harsh environment of the wheel well, shielding internal seals from abrasive brake dust, road grime, and moisture.

Over time, high thermal cycles and environmental exposure can cause original boots to crack or tear, leading to piston corrosion and potential caliper seizure. Replacing damaged boots during a pad change or caliper service ensures smooth piston retraction and extends the service life of your brake components.

• Manufacturer: Brembo
• Component Type: Caliper Piston Dust Boot
• Piston Diameter: 44mm
• Material: High-temperature resistant rubber compound

This genuine Brembo 40mm dust boot is an essential replacement component for maintaining the performance and longevity of your braking system. Specifically engineered for 40mm caliper pistons, this boot provides a critical seal that shields the piston and internal seals from road grime, brake dust, and moisture.

• Genuine Brembo replacement part
• Precision fit for 40mm diameter caliper pistons
• Durable construction to withstand high-heat braking environments
• Prevents piston seizure and seal degradation by blocking contaminants

Replacing a torn, cracked, or heat-fatigued dust boot is a vital part of any caliper service or rebuild. By ensuring the piston remains clean and protected, you maintain smooth piston retraction and consistent pedal feel while preventing premature seal failure.

This genuine Brembo 38mm dust boot is a critical replacement component for maintaining the integrity of your high-performance braking system. Designed to fit 38mm caliper pistons, this boot acts as a primary barrier against brake dust, road debris, and moisture, preventing contaminants from reaching the internal piston seal and cylinder bore.

• Precision Fit: Engineered specifically for 38mm Brembo caliper pistons to ensure a secure, weather-tight seal.
• Durability: Constructed from high-grade elastomer compound to withstand the extreme heat cycles and environmental exposure typical of performance driving.
• Critical Maintenance: Replacing torn or heat-cracked boots is essential during a caliper rebuild to prevent piston stiction and corrosion.
• Authentic Brembo: Ensures exact compatibility and performance matching the original equipment standards.

Restore the integrity of your braking system with this genuine Brembo 34mm dust boot. Designed for calipers utilizing 34mm pistons, this boot acts as a critical secondary seal, preventing brake dust, road debris, and moisture from reaching the piston bore and the primary pressure seal. Maintaining intact dust boots is essential for preventing piston pitting and ensuring smooth, consistent caliper retraction.

• Compatible with Brembo calipers using 34mm pistons
• Durable elastomer construction resists high brake temperatures
• Helps prevent piston sticking and internal seal contamination
• Genuine Brembo replacement part for precise fitment

Maintain the hydraulic integrity and performance of your braking system with this genuine Brembo 38mm piston seal. Designed specifically for calipers utilizing a 38mm piston diameter, this replacement seal is critical for preventing brake fluid leaks and ensuring proper piston retraction after every brake application.

• Precision-engineered for 38mm Brembo caliper pistons
• Manufactured from high-grade elastomers for thermal stability and fluid resistance
• Restores consistent pedal feel and hydraulic pressure
• Direct replacement for worn or damaged OE seals

Using authentic Brembo replacement components ensures your braking system operates within the tight tolerances required for high-performance and street applications alike. Regular inspection and replacement of caliper seals are essential during brake overhauls to prevent contamination and maintain stopping power.

Maintain the integrity of your braking system with this genuine Brembo 28mm replacement piston seal. This critical hydraulic component is engineered to provide a precise, high-pressure seal between the caliper bore and the piston, preventing fluid leaks and protecting against external contaminants.

Over time, heat cycles and exposure to brake fluid can cause seals to harden or lose elasticity, leading to sluggish piston retraction or brake drag. Replacing worn seals with genuine Brembo components ensures consistent pedal feel and reliable stopping power. This seal is an essential part for rebuilding or servicing high-performance Brembo calipers equipped with 28mm pistons.

• Piston Diameter: 28mm
• Material: High-temperature resistant elastomer
• Ensures proper piston retraction and hydraulic pressure
• Genuine Brembo replacement component

Maintain consistent braking performance and a firm pedal feel with this authentic Brembo racing caliper bleeder screw. Designed for high-performance hydraulic systems, this component allows for efficient air evacuation during brake fluid service and system bleeding.

Constructed with a durable zinc-plated finish, this bleeder screw provides essential corrosion resistance to withstand the high temperatures and environmental exposure typical of track use. The precision-machined M10x1.0 thread ensures a secure, leak-free seal within the caliper body for reliable pressure retention.

• Brand: Brembo
• Thread Pitch: M10x1.0
• Overall Length: 29mm
• Material: Zinc-Plated Steel
• Finish: Silver
• Application: Brembo Racing Calipers

Protect your braking system from environmental contaminants with the Brembo Standard Bleeder Screw Cap. This essential component fits securely over the bleeder valve on Brembo brake calipers to prevent road grime, brake dust, and moisture from obstructing the orifice or causing the threads to seize over time.

Molded from a durable, high-temperature rubber compound, these caps are designed to withstand the extreme thermal cycles experienced during performance driving without hardening or cracking. Maintaining intact bleeder caps is a critical yet often overlooked step in ensuring your next brake bleed is clean and efficient.

• Genuine Brembo replacement component ensures proper fitment
• High-temperature resistant rubber construction for long-term durability
• Provides a weather-tight seal to protect the internal bleeder valve channel
• Designed for use on standard Brembo performance and OE-equipped calipers

Fits 1979-2012 Beaver Motorcoach Monterey. This DFC Premium Hardware Kit is engineered to restore optimal braking performance by replacing worn, corroded, or fatigued brake components on your motorcoach. Fresh hardware is essential for ensuring brake pads move freely within the caliper, preventing uneven wear, dragging, and excessive heat build-up.

• Low coefficient of friction for smooth, consistent pad engagement and release
• High heat and chemical resistance specifically designed for heavy-duty braking demands
• Corrosion-resistant finish prevents component seizing and simplifies future maintenance
• Precision-engineered for easy assembly and exact fitment in factory locations

Maintain optimal hydraulic pressure and a firm pedal feel with this precision-engineered Wilwood 1/4-28 bleed screw. Designed as a direct replacement for worn, rounded, or clogged bleeder valves in many Wilwood calipers, this component is essential for effectively purging air from your brake system during routine maintenance or fluid flushes.

• Thread Size: 1/4-28
• Finish: Durable Black Oxide
• Material: High-strength steel construction
• Application: Fits a wide range of Wilwood and aftermarket performance brake calipers
• Function: Allows for precise control of fluid flow to remove trapped air from hydraulic lines

Constructed from high-quality steel with a corrosion-resistant black oxide finish, this bleeder screw is built to handle the extreme heat and pressure of performance driving environments. Replacing a compromised bleed screw ensures a tight seal and prevents fluid leaks that can lead to catastrophic brake failure.

Fits 1990-1997 Mazda Miata models (Base, LE, M Edition, SE, STO) equipped with ABS.

The Radium Engineering Master Cylinder Brace is a critical upgrade for drivers seeking a firmer, more responsive brake pedal. In the NA Mazda Miata, the master cylinder is mounted to a relatively thin firewall that flexes under heavy braking loads. This deflection leads to a spongy pedal feel and makes it difficult to modulate braking force precisely at the limit.

This bolt-in brace (MPN 20-0843) provides a rigid mechanical stop for the master cylinder, effectively bracing it against the shock tower. By eliminating firewall flex, it ensures that your foot's effort is translated directly into hydraulic pressure. The result is improved pedal stiffness and consistent braking performance on both the street and the track.

• Designed specifically for 1990-1997 Mazda Miata chassis equipped with ABS
• Reduces firewall deflection for improved braking modulation and feel
• Durable construction with high-quality hardware
• Direct bolt-in installation with no permanent modifications required
• Manufacturer Part Number: 20-0843

Fits select 2009-2025 Mercedes-Benz (A, C, E, G, GLA, GLC, GLE, S-Class, AMG, and Maybach) and 2017-2019 Infiniti QX30 models.

The Power Stop Euro-Stop SW-1656 Electronic Brake Pad Wear Sensor is a precision-engineered replacement designed to restore the functionality of your vehicle's brake monitoring system. When brake pads wear down to a critical level, these sensors complete a circuit to trigger the dashboard warning light, ensuring you perform maintenance before rotor damage or safety issues occur. Built to meet or exceed original equipment standards, this sensor ensures a seamless fit and reliable electrode conductivity under high-heat braking conditions.

• Manufacturer Part Number: SW-1656
• Thermal Reliability: Tested at 500°F to ensure consistent performance in extreme braking environments.
• OEM Standard Construction: Includes application-specific grommets, mounting clips, and cable protection sleeves.
• Weatherproof Design: Features water-tight connections to prevent corrosion and false signaling.
• Direct Fit: Engineered for easy installation with no modifications required to the factory harness.

The Alcon Pro-System Rotor Temperature Paint Kit (TEM.100440) is a professional-grade diagnostic tool designed to monitor peak brake rotor temperatures during high-performance or competition use. Accurate thermal data is essential for optimizing brake ducting airflow and selecting the appropriate brake pad compound for your specific track conditions.

By applying these temperature-sensitive paints to the rotor vanes or outer edges, you gain a clear visual record of the maximum temperatures reached during a session. The paint changes color at specific heat thresholds, allowing technicians and drivers to identify potential overheating issues, prevent thermal fatigue, and ensure the braking system remains within its ideal operating window.

• Manufacturer Part Number: TEM.100440
• Function: Visual heat range monitoring for thermal management
• Application: Direct application to brake rotor edges or cooling vanes
• Included: Multi-color temperature-sensitive paint set with applicators
• Benefit: Assists in brake pad selection and cooling duct optimization