Protect your ignition system from extreme under-hood temperatures with the DEI Titanium Protect-A-Boot and Wire Kit. Engineered for 8-cylinder engines, this kit (MPN 10705) utilizes proprietary LR technology—a unique material derived from lava rock that is woven into a high-strength, pliable fabric. These boots are designed to withstand direct heat up to 1800°F (982°C), preventing the hardening, cracking, and burning that lead to ignition arcing and engine misfires.

• Extreme Heat Resistance: Woven basalt fiber construction handles up to 1800°F direct heat and 2500°F radiant heat.
• Universal Fitment: 6-inch double-wall boots are pliable enough to fit straight or angled boots on wire sizes up to 8mm.
• Complete Protection: Includes 25 feet of Protect-A-Wire sleeving to shield wires from exhaust manifold and header heat.
• Durable Construction: Naturally resistant to chemicals, abrasions, and contaminants with a carbon-fiber-style aesthetic.

Kit Includes:

• (8) Titanium Protect-A-Boots (6-inch length)
• (25 ft.) Protect-A-Wire Sleeving
• (25) High-Temp Shrink Tubes

The DEI RFI Shield is engineered to suppress Radio Frequency Interference (RFI) and Electromagnetic Interference (EMI) generated by high-voltage ignition systems and wiring. By creating a protective barrier, it prevents electronic noise from disrupting sensitive computer systems, electronic fuel injection (EFI) signals, and audio components. This allows the ECU to maintain precise fuel delivery and optimal engine performance without interference-related signal degradation.

The shielding tape features a non-adhesive design, allowing it to be wrapped around existing harnesses without disconnecting wiring or depinning connectors. It is highly effective for bundling wiring sets larger than 1 inch in diameter. Each kit includes a dedicated 17.5-inch grounding strap to properly drain interference to the chassis and DEI Quick Fix Silicone Tape to provide a permanent, heat-resistant seal at the ends of the sleeve.

• Suppresses RFI and EMI from ignition systems and high-voltage leads
• Non-adhesive wrap design allows for installation without harness disassembly
• Shields delicate EFI and electronic sensors for consistent performance
• Includes 17.5-inch grounding strap for effective interference drainage
• Includes DEI Quick Fix Silicone Tape for secure end-sealing
• Dimensions: 1/2-inch width x 3-foot length
• Manufacturer Part Number: 10681

Protect sensitive vehicle electronics from electromagnetic and radio frequency interference with DEI RFI Wire Mesh Shield Tape. This specialized shielding solution wraps around existing wiring harnesses to eliminate signal noise that disrupts radios, electronic fuel injection (EFI) systems, and other critical electronic components.

Engineered for straightforward installation without depinning connectors, the mesh tape provides a flexible, continuous conductive barrier. The included grounding strap ensures proper electrical termination to the chassis, while the Quick-Fix tape provides a clean, professional finish at the ends of the wrap.

• Shields against RFI and EMI signals to maintain signal integrity
• Dimensions: 1 inch wide x 25 feet long
• Conveniently wraps around existing harnesses for quick installation
• Includes 2 feet of DEI Quick-Fix Tape for securing ends
• Includes a 17.5-inch grounding strap for proper termination
• Manufacturer Part Number: 10679

Eliminate vapor lock and boiling fuel issues with the DEI Vapor Block Heat Shield Sleeve. Engineered to insulate fuel lines from extreme engine bay temperatures, this sleeve keeps fluid temperatures below the boiling point to prevent rough idling and difficult hot starts. The 10671 sleeve is constructed from a glass fiber and polyester core laminated to a highly reflective aluminum outer layer for superior thermal protection.

Installation is straightforward due to the split design and integrated adhesive flap. This allows the sleeve to be wrapped around existing fuel lines, cables, or hoses without disconnecting them—simply remove the adhesive liner and press the flap into place. It is an ideal solution for modern high-heat engine compartments where fuel system reliability is critical.

• Part Type: Heat Shield Sleeve
• Dimensions: 3/8 in. (10mm) Inside Diameter x 36 in. length
• Construction: Glass fiber and polyester laminated to an aluminum outer layer
• Installation: Split design with built-in adhesive flap (no line disconnection required)
• Application: Suitable for fuel lines, cables, and hoses; easy to cut to size
• Caution: Do not apply directly to exhaust components
• Manufacturer Part Number: 10671

The DEI Easy Loom Master Kit (MPN 10663) is a comprehensive solution for protecting and restoring factory or aftermarket wire harnesses. This kit utilizes self-closing split sleeves with a 30% overlap, allowing for easy installation over existing wiring without the need to disconnect terminals or de-pin connectors. Built from durable P.E.T. monofilament, the Easy Loom system provides superior abrasion resistance compared to standard plastic tubing while maintaining excellent flexibility.

• Material: P.E.T. monofilament resists UV rays, moisture, and most automotive chemicals
• Temperature Rating: Tested to 302°F (150°C) with a peak rating of 347°F and a melting point of 500°F
• Safety: Self-extinguishing properties for critical engine bay environments
• Includes: 5 different sleeve diameters, heat shrink tubing, silicone tape, electrical tape, and over 140 locking ties
• Installation: Includes specialized small and large line sleeving tools to simplify wire insertion

Kit Manifest:

• Easy Loom: 1 in. x 6 ft, 3/4 in. x 10 ft, 1/2 in. x 30 ft, 5/16 in. x 60 ft, 3/16 in. x 15 ft
• Heat Shrink: 3/8 in. x 2 ft, 1/4 in. x 1 ft, 1/2 in. x 1 ft
• Locking Ties: (40) 8 in. ties and (100) 4 in. ties
• Tape & Tools: (1) 1 in. x 12 ft Silicone Tape, (1) Roll Electrical Tape, (2) Sleeving Tools

DEI Easy Loom™ Split Sleeves provide a professional, durable solution for organizing and protecting wiring harnesses, hoses, and cables. Unlike standard plastic convoluted tubing, Easy Loom is constructed from high-quality P.E.T. monofilament, offering superior flexibility and a clean, high-end appearance for engine bays and chassis wiring.

The innovative split design allows for quick installation over existing lines without requiring the disconnection of wires or terminals. This sleeve provides high-level protection against abrasion, automotive chemicals, UV rays, and moisture, ensuring long-term reliability in harsh environments. Each kit includes silicone tape to neatly secure the ends of the loom.

• Material: Durable P.E.T. monofilament construction
• Dimensions: 10mm (3/8 in.) ID x 20 ft length
• Temperature Rating: Tested up to 302°F (150°C)
• Features: Self-extinguishing and resistant to most automotive fluids
• Installation: Split design for easy access; includes silicone finishing tape
• Origin: Made in the USA
• Manufacturer Part Number: 10652

DEI Protect-A-Sleeve with proprietary LR Technology provides professional-grade thermal protection for critical components exposed to extreme engine and exhaust heat. Constructed from the same pulverized volcanic rock material as DEI's signature Titanium exhaust wrap, this sleeve is designed to prevent spark plug wire arc-through and protect fuel, oil, and electrical lines from heat-induced cracking and failure.

• Handles 1800°F direct heat and 2500°F radiant heat
• Engineered with LR Technology for high flexibility and durability
• Highly resistant to chemicals, abrasion, and moisture
• Universal fit for automotive, marine, and powersports applications
• Dimensions: 1/2-inch Inner Diameter (ID) x 3-foot length
• Manufacturer Part Number: 10590

Ideal for routing close to headers or manifolds, the Titanium Protect-A-Sleeve ensures consistent performance for street, race, and off-road engines by maintaining the integrity of your vehicle's wiring and fluid transfer systems.

DEI Black Titanium Protect-A-Sleeve provides advanced thermal protection for spark plug wires, fuel lines, oil lines, and electrical cables. Utilizing proprietary LR Technology, this sleeve is designed to prevent burning, cracking, and heat soak in extreme environments, making it ideal for street performance, race engines, and powersports applications.

This 1-inch I.D. sleeve is constructed from the same volcanic-rock based material as DEI Titanium Exhaust Wrap, offering superior chemical and abrasion resistance compared to standard fiberglass sleeves. It is engineered to withstand the harshest conditions near exhaust manifolds and headers, maintaining flexibility and structural integrity while protecting critical engine components from failure.

• Direct Heat Resistance: Up to 1800°F
• Radiant Heat Resistance: Up to 2500°F
• Material: Proprietary Black Titanium with LR Technology
• Resistant to chemicals, abrasion, and water
• Application: Universal fit for wires, lines, and hoses
• Dimensions: 1" Inside Diameter x 36" Length
• Manufacturer Part Number: 10589

The DEI 10529 Universal Muffler Shield Kit is engineered to eliminate radiant heat soak from mufflers into the cabin floor and surrounding components. Utilizing high-performance materials based on DEI's Floor and Tunnel Shield II, this kit wraps around almost any muffler body to significantly lower interior temperatures and protect sensitive underbody parts.

Constructed from 10mil dimpled aluminum bonded to a 1/8-inch needle glass insulator, the shield can be easily trimmed for a custom fit. The included 40-inch stainless steel positive locking ties ensure a secure, tight installation that resists vibration and extreme heat. Note: This kit is intended for street-legal vehicle use; for racing or heavy industrial applications, Form-A-Shield is recommended.

• Reduces radiant heat for a cooler interior and component protection
• 10mil dimpled aluminum construction with 1/8 in. needle glass insulation
• Universal design fits most muffler sizes; easily trimmed to fit
• Includes 42 in. x 24 in. muffler shield
• Includes four 40 in. x 1/2 in. stainless steel positive locking ties
• Included Locking Tie Tool for secure installation
• Manufacturer Part Number: 10529

DEI Form-A-Shield (10517) provides a rugged, direct-contact thermal solution for managing extreme heat in high-performance environments. Engineered from 10 mil dimpled aluminum bonded to a 1/4-inch high-temperature basalt thermal barrier, this shield is rated to withstand constant direct heat of up to 1400°F. Its pliable construction allows it to be manually formed around complex geometries like exhaust headers, manifolds, turbo housings, and downpipes to dramatically reduce radiant heat transfer under the hood.

Designed for long-term durability, Form-A-Shield is resistant to oil and chemical spills, making it an ideal choice for under-chassis and engine bay protection, including firewalls and transmission tunnels. This specific version features no adhesive backing (Non-PSA) to ensure integrity when applied directly to hot surfaces; it should be secured using mechanical fasteners such as hose clamps, straps, or DEI Locking Ties.

• Continuous direct heat resistance up to 1400°F+
• Constructed from 10 mil dimpled aluminum bonded to 1/4 in. basalt mat
• Large 21 in. x 48 in. sheet for custom trimming and coverage
• Extremely pliable; holds shape when formed to manifolds or housings
• Durable finish resistant to oil, grease, and chemical exposure
• Non-PSA version (No adhesive backing) for direct-to-heat applications
• Manufacturer Part Number: 10517

DEI Form-A-Shield (10516) provides a specialized direct-contact thermal barrier for extreme-heat environments. Constructed from 10 mil dimpled aluminum bonded to a high-temperature 1/4-inch basalt thermal mat, this barrier is designed to withstand direct heat of up to 1400°F. Because this version features no adhesive backing (Non-PSA), it can be applied directly to high-heat surfaces that would otherwise compromise adhesive bonds, such as exhaust headers, manifolds, turbo housings, and downpipes.

• Direct Heat Resistance: Withstands temperatures up to 1400°F+ in direct contact applications.
• Advanced Construction: 10 mil dimpled aluminum bonded to a 1/4 in. basalt thermal barrier material.
• Extreme Pliability: Easily conforms to complex shapes, including transmission tunnels, floor pans, and fuel cells.
• Fluid Resistance: Durable material is resistant to oil and chemical spills common in automotive environments.
• Mechanical Fastening: Designed for installation using clamps, straps, or DEI Locking Ties.
• Versatile Use: Suitable for firewalls, oil tanks, and under-vehicle protection near exhaust paths.
• Manufacturer Part Number: 10516

Note: For use in non-hot areas where a reflector is needed, DEI Adhesive Spray may be used to secure the shield.

DEI Quick Fix Tape (MPN 10491) is an essential emergency repair and insulation solution for automotive, marine, and workshop applications. Extruded from a high-performance silicone compound, this adhesive-free tape bonds to itself instantly to create a permanent, airtight, and liquid-tight seal. Unlike standard electrical tape, it leaves no sticky residue when removed and can even be applied to wet or oily surfaces.

Engineered for extreme environments, this tape features a unique triangular profile where the center is thicker than the edges, ensuring smooth, void-free overlapping. It is ideal for emergency hose repairs, insulating electrical connections up to 8,000V, bundling wire harnesses, and creating non-slip grips for tools.

• Tensile Strength: 700 psi
• Insulation: Rated up to 8,000 volts
• Temperature Range: -65°F (-54°C) to 500°F (260°C)
• Elongation: Stretches up to 3x its original length
• Chemical Resistance: Resists fuels, oils, solvents, acids, and salt water
• Dimensions: 1 inch wide x 12 foot roll
• Construction: Self-curing silicone with no adhesive required

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, Grand Sport, and ZR1 models.

The DEI 10488 Oil Cooler Heat Shroud is a specialized thermal management solution designed to shield oil lines from intense radiant heat generated by the engine and exhaust. Excessive heat soak in these lines can lead to elevated engine oil temperatures, a common trigger for "limp mode" in high-performance C7 Corvette models during track use or spirited driving.

Featuring a convenient split design with a hook-and-loop fastening system, these sleeves wrap directly around the oil cooler lines. This eliminates the need to disconnect lines or drain the oil system, allowing for a fast and clean installation. The shroud effectively reflects radiant heat to maintain lower fluid temperatures and protect sensitive components.

• Reflects radiant heat away from oil cooler lines to reduce fluid temperatures
• Helps prevent engine "limp mode" caused by oil overheating
• Split design with hook-and-loop closure for installation without line removal
• Custom-fit application for C7 Corvette chassis
• Dimensions: 2 in. to 2.5 in. diameter x 18 in. length
• Manufacturer Part Number: 10488

The DEI Heat Shroud (MPN 10487) provides critical thermal protection for lines, hoses, and wires without requiring component disassembly. Engineered with a 19 oz high-temperature heat-treated glass fiber core and a reflective aluminized outer facing, this sleeving reflects up to 90% of radiant heat and withstands temperatures up to 2000°F.

The convenient hook-and-loop closure design allows for quick, tool-free installation over existing lines, protecting them from heat soak, oil, road grime, and abrasions. The sleeve is reinforced with aramid thread for maximum durability and flame-retardant performance in high-heat environments. It remains flexible enough for tight bends and can be easily trimmed to the required length.

• Dimensions: 2-1/2" Internal Diameter x 3' length
• Thermal Performance: Reflects 90% of radiant heat up to 2000°F
• Material: 19 oz heat-treated glass fiber fabric with a durable aluminized outer layer
• Closure: Adjustable hook-and-loop edges for installation without disconnecting lines
• Protection: Resists oil, dirt, and abrasion; fireproof construction
• Stitching: High-strength, heat-resistant aramid thread
• Origin: Made in the USA

Warning: Do not apply the Heat Shroud directly to exhaust components.

The DEI Cool-Cover GOLD (MPN: 10486) provides a high-performance solution for heat soak in air intake tubes and cold air induction systems. By reflecting radiant heat away from the intake tract, this cover helps maintain a cooler, denser air charge for improved combustion efficiency and consistent power delivery.

Constructed from a high-temperature metalized polyimide lamination bonded to a 21oz heat-treated weave lock glass fiber base, the Cool-Cover GOLD is engineered to reflect heat up to 800°F. The design features a full-length hook-and-loop closure system, allowing for quick installation or removal without disconnecting the intake plumbing. This makes it an ideal choice for both street performance and track applications where thermal management is critical.

• Fitment: Fits intake tubes from 3 inch to 4 inch outer diameter (OD)
• Dimensions: 28 inches long
• Material: Metalized polyimide bonded to 21oz heat-treated glass fiber
• Heat Rating: Reflects radiant heat up to 800°F
• Closure: Full-length hook-and-loop fastening system for easy serviceability
• Standards: Tested to ASTM D1117 and FSTM 191.5100 standards
• Part Number: 10486

Protect technicians and shop staff from serious burns and cuts with the DEI Hub and Rotor Cover. Designed to shield hot braking components during pit stops or service, this cover provides a critical safety barrier against residual heat and sharp edges. The cover also serves as a protective shield against dirt, dust, and airborne particles, keeping your braking surfaces clean in the track paddock or shop environment.

• Heat Resistance: Withstands up to 2000°F of radiant heat and 500°F of direct, continuous contact.
• Premium Construction: Manufactured from aluminized Mylar adhered to a heavy-duty fiberglass matting for maximum thermal reflection and durability.
• Safety Utility: Prevents accidental contact with scorching rotors or drums immediately after vehicle operation.
• Dimensions: 14 in. W x 13 in. H x 7 in. L
• Manufacturer Part Number: 10485

The DEI Cell Saver Battery Insulation Kit (MPN 10480) provides a dual-layer defense against the leading causes of battery failure: extreme radiant heat and excessive vibration. This kit is designed to wrap the battery casing in a thermal barrier capable of withstanding radiant temperatures up to 2,000°F, preventing heat soak that degrades battery chemistry and shortened service life.

The system also includes a treated base mat designed to trap and neutralize corrosive battery acid, protecting your vehicle's battery tray and engine bay from electrolyte damage. The material is completely safe to handle during installation and can be easily trimmed to provide a custom fit for most battery sizes and configurations.

• Thermal Performance: Reflective material withstands up to 2,000°F of radiant heat.
• Acid Protection: Absorbs and neutralizes harmful battery acid to protect the vehicle environment.
• Vibration Damping: Helps isolate the battery from chassis vibrations that can cause internal plate damage.
• Universal Application: Trim-to-fit design works with most automotive, marine, and powersports batteries.
• Kit Components: Includes one 40" x 7" insulation sheet, one 12" x 7" treated base mat, and edge seal material.

Protect sensitive wires, cables, and hoses from high-temperature environments with the DEI Fire Wrap 3000 thermal insulating sleeve. Designed for convenience, this sleeve utilizes a hook and loop edge closure, allowing for quick installation over existing lines without the need for time-consuming disconnections.

Constructed from the same heat-resistant material as the professional-grade DEI Fire Sleeve, the Fire Wrap 3000 provides a durable barrier against direct heat, moisture, and common automotive fluids. Its pliable design ensures it can navigate tight bends and contours in crowded engine bays or chassis locations.

• Heat Resistance: Withstands direct heat up to 500°F (260°C).
• Closure System: Hook and loop fastening for easy wrapping and removal.
• Environmental Protection: Resists oil, dirt, road grime, and other contaminants.
• Dimensions: 1-1/2 inch (1.5") I.D. x 24 inches (2 ft) length.
• Manufacturer Part Number: 10479

The DEI Fire Wrap 3000 (MPN: 10478) provides heavy-duty thermal protection for wires, cables, and hoses in high-heat environments. Engineered with the same high-temperature materials as the standard Fire Sleeve, this version features a hook and loop edge closure, allowing for quick installation over existing lines without the need for disassembly or disconnecting fluid connections.

• Heat Resistance: Withstands direct, continuous heat up to 500°F.
• Easy Installation: Hook and loop fastening system simplifies routing around installed components.
• Durability: Provides a barrier against oil, dirt, road grime, and other engine bay contaminants.
• Flexibility: Pliable construction allows the sleeve to follow tight bends and complex routing without kinking.
• Dimensions: 1-inch Internal Diameter (ID) by 2-foot length.

Ideal for protecting sensitive electrical looms or fuel lines located near exhaust manifolds or turbochargers, Fire Wrap 3000 ensures long-term component reliability under extreme under-hood conditions.

The DEI Fire Wrap 3000 (10477) provides heavy-duty thermal insulation with the added convenience of a hook-and-loop edge closure. Constructed from the same high-temperature materials as the standard DEI Fire Sleeve, this wrap allows for immediate installation over existing wires, cables, and hoses without the need to disconnect any lines or fittings.

• Heat Resistance: Withstands direct heat up to 500°F, protecting sensitive components in high-temp environments.
• Dimensions: 5/8-inch inner diameter (I.D.) in a 2-foot pre-cut section.
• Easy Installation: Hook-and-loop fastening system allows for quick wrapping and removal on installed components.
• Environmental Protection: Pliable enough to follow tight bends while shielding against oil, dirt, road grime, and other engine bay contaminants.
• Manufacturer Part Number: 10477

DEI Fire Tape (MPN 10476) is a versatile, self-fusing silicone rubber tape engineered for high-heat environments and rugged automotive applications. This non-adhesive, self-vulcanizing wrap creates a permanent, air- and liquid-tight seal by bonding to itself rather than the substrate, ensuring no sticky residue is left behind after removal. It serves as a superior insulating alternative to standard vinyl tapes for wrapping wiring harnesses, protecting splices, and securing electrical terminations.

Specifically designed to work in tandem with DEI Fire Sleeve and other line protection products, this tape remains flexible and does not harden over time. Its high tensile strength and thermal resistance make it an essential tool for both professional builders and DIYers looking to manage under-hood heat and protect critical plumbing and electrical systems.

• Withstands 500°F (260°C) direct continuous heat
• 700 psi tensile strength for secure, high-pressure seals
• Self-bonding and self-curing stretch-and-wrap application
• Corrosion and moisture resistant to protect against the elements
• Non-adhesive silicone rubber construction leaves no residue
• Dimensions: 1 inch wide x 36 feet long
• Manufacturer Part Number: 10476

The DEI Fire Sleeve and Tape Kit (MPN: 10474) provides professional-grade thermal insulation and abrasion resistance for critical automotive lines. This 1-inch I.D. sleeve is designed to shield fuel, transmission, and brake lines, as well as electrical wiring harnesses, from extreme under-hood temperatures and direct heat exposure.

• Advanced Construction: Features a high-temperature braided glass inner sleeve heavily coated with 100% iron oxide silicone rubber for maximum heat rejection and fluid resistance.
• Temperature Ratings: Engineered to withstand 500°F of continuous direct heat and up to 2000°F of intermittent heat.
• Complete Kit: Includes 3 feet of Fire Sleeve and a 16-inch length of black self-adhering Fire Tape to provide a clean, secure finish without the need for adhesives.
• Versatile Fitment: The 1-inch diameter is ideal for larger applications, including 10AN, 12AN, and 16AN lines, as well as 5/8-inch and 3/4-inch heater hoses.

Whether you are preventing vapor lock in fuel lines or protecting sensitive wiring from exhaust manifold heat, this kit provides a durable, fireproof barrier. The flexible material allows for approximately 1/16-inch to 1/8-inch of stretch to accommodate fittings during installation.

Protect critical engine components from heat damage and abrasion with the DEI Fire Sleeve and Tape Kit. This professional-grade thermal insulator is designed to shield fuel lines, transmission lines, brake lines, and electrical wiring from extreme under-hood temperatures and potential fire hazards. The sleeve is constructed from high-temperature braided glass material coated with a thick layer of 100% iron oxide silicone rubber for maximum heat rejection and durability.

• Temperature Resistance: Withstands up to 500°F (260°C) of continuous direct heat and up to 2000°F (1093°C) of intermittent heat.
• Construction: Braided fiberglass inner core with a heavy silicone rubber outer coating for moisture and chemical resistance.
• Kit Includes: One 3/4-inch I.D. x 3-foot Fire Sleeve and 16 inches of black Fire Tape (self-adhering, adhesive-free) for securing and finishing the ends.
• Versatile Protection: Ideal for bundling wiring harnesses or protecting fluid lines from manifold heat and physical wear.
• Fitment Note: The 3/4" I.D. material offers approximately 1/16" to 1/8" of stretch to accommodate fittings during installation.
• Manufacturer Part Number: 10473

Protect critical fuel, transmission, and brake lines from extreme radiant heat and abrasion with the DEI Fire Sleeve and Tape Kit. This 5/8-inch I.D. sleeve is engineered from high-temperature braided glass material coated in a thick, iron-oxide silicone rubber. It provides a fireproof barrier capable of withstanding 500°F of continuous heat and up to 2000°F of intermittent exposure, making it an essential upgrade for high-performance engine bays and heavy-duty applications.

• Universal Fitment: Designed to fit various line sizes including -6AN and -8AN braided hoses; may require upsizing for lines with pre-installed fittings.
• High-Heat Resilience: Rated for 500°F continuous and 2000°F intermittent heat protection.
• Complete Kit: Includes 3 feet of 5/8-inch I.D. Fire Sleeve and 16 inches of black self-adhering Fire Tape for a professional, adhesive-free finish.
• System Protection: Insulates and bundles wiring, oil lines, brake lines, and transmission hoses to prevent heat soak and fluid degradation.
• Safety Benefit: Reduces the risk of vapor lock and provides burn protection for technicians during under-hood maintenance.
• Manufacturer Part Number: 10472

The DEI Fire Sleeve and Tape Kit (MPN 10470) provides professional-grade thermal insulation and abrasion resistance for critical automotive fluid lines and electrical systems. This kit is designed to solve the problem of heat-related damage to fuel, transmission, and brake lines. The sleeve is constructed from a high-temperature resistant braided fiberglass material that is heavily coated with 100% iron oxide silicone rubber to provide a robust thermal barrier in extreme engine bay environments.

This kit is ideal for protecting and bundling wiring, hoses, and lines. It includes 16 inches of black Fire Tape—a self-adhering, adhesive-free tape—to secure the ends of the sleeve for a clean, professional finish. The material offers enough flexibility to allow for a 1/16-inch to 1/8-inch stretch to accommodate various fittings.

• Temperature Rating: Withstands 500°F continuous and 2000°F intermittent heat.
• Fitment: Compatible with -3AN, -4AN, and -6AN lines (Note: -6AN provides a tight fit).
• Construction: Braided glass material with heavy iron oxide silicone rubber coating.
• Dimensions: 0.375 inch (3/8") I.D. x 36 inches (3ft) length.
• Included Components: 3ft Fire Sleeve and 16-inch black Fire Tape.
• Part Number: 10470

DEI Cool-Tape is a professional-grade, ultra-lightweight heat reflective solution designed to protect sensitive components from extreme thermal damage. Constructed from one-mil aluminized material bonded to a woven glass fiber heat-resistant matting, this flexible tape provides a durable barrier for wires, cables, hoses, and fuel lines.

This self-adhesive tape is ideal for sealing air boxes, securing panels, and providing a clean, finished edge to thermal barriers like Reflect-A-Cool or Floor & Tunnel Shield II. While it handles high radiant loads, it is not intended for direct contact with exhaust components.

• Radiant Heat Protection: Withstands up to 2000°F
• Direct Heat Resistance: Withstands up to 400°F
• Dimensions: 2 inches wide x 30 feet long
• Construction: Aluminized material with woven glass fiber backing
• Installation: High-strength self-adhesive backing for easy application
• MPN: 10468

Protect expensive dynamometer tie-down straps from catastrophic burn-through during high-load pulls. The DEI Dyno Strap Heat Guard is specifically engineered to shield nylon or polyester straps from the intense exhaust exit heat generated when a vehicle is under load on the rollers.

Constructed from a high-temperature resistant aluminized Mylar, this sleeve reflects radiant heat and provides a thermal barrier against direct heat contact. The slip-over design allows for quick installation on most standard dyno straps without requiring specialized tools. This 36-inch sleeve provides ample coverage for straps positioned near exhaust tips or wastegate dumps.

• Part Number: 10466
• Dimensions: 5 in. wide x 36 in. long (3 ft.)
• Direct Heat Resistance: Withstands up to 500°F
• Radiant Heat Resistance: Withstands up to 2000°F
• Material: Aluminized Mylar construction
• Installation: Slips over existing tie-down straps

DEI Reflect-A-Cool (MPN 10462) is a specialized heat barrier designed to protect vehicle interiors, components, and electronics from damaging radiant heat. Constructed from a fiberglass material backed with a layer of aluminized reflective foil, this sheet is engineered for applications where mechanical fasteners are impractical. At just 0.0065 inches thick, it offers a virtually zero-clearance solution for firewalls, marine engine compartments, RVs, and race car tubs.

• Thermal Performance: Rated for 400°F direct continuous temperature and up to 2000°F of radiant heat protection.
• Construction: Lightweight, flexible fiberglass with an aluminized foil facing and high-tack self-adhesive backing.
• Durability: Highly resistant to moisture and solvents for long-term engine bay or marine use.
• Dimensions: 24 in. x 24 in. sheet; easily trimmed to size with standard shears or a utility knife.
• Installation: Simple peel-and-stick application; face the reflective side toward the radiant heat source.

Note: Do not apply Reflect-A-Cool directly to exhaust components or surfaces that exceed 400°F continuous direct contact.

DEI Reflect-A-Cool provides a versatile solution for managing heat intrusion into vehicle interiors and sensitive engine components. This lightweight barrier is constructed from a fiberglass material backed with a layer of aluminized reflective foil, engineered to withstand direct continuous temperatures of 400°F and radiant heat up to 2000°F.

Designed for applications where mechanical fasteners are impractical, this sheet features a high-temperature self-adhesive backing for secure attachment to firewalls, marine engine compartments, and RV tubs. At only 0.0065 inches thick, it requires virtually no clearance and can be easily trimmed to protect wires, cables, hoses, and pipes from radiant heat sources.

• Dimensions: 12 in. x 24 in.
• Thickness: 0.0065 in.
• Radiant Heat Protection: Up to 2000°F
• Direct Continuous Temperature: 400°F
• Material: Aluminized foil-backed fiberglass
• Moisture and solvent resistant construction
• Easy trim-to-fit installation with self-adhesive backing
• Manufacturer Part Number: 10461

Note: Do not apply Reflect-A-Cool directly to exhaust components.

DEI Reflect-A-Cool (10460) is a high-performance heat barrier engineered to protect interiors, body panels, and sensitive components from radiant heat intrusion. This 12-inch by 12-inch sheet is constructed from a specialized fiberglass base material laminated to a layer of aluminized reflective foil. At only 0.0065 inches thick, it offers a low-profile solution for firewalls, floorboards, and engine compartments where space is at a premium.

• Thermal Resistance: Rated to handle 400°F direct continuous temperature and provides radiant heat protection up to 2000°F.
• Durable Construction: The aluminized surface is moisture and solvent resistant, ensuring long-term performance in automotive and marine environments.
• Easy Installation: Features a high-temperature self-adhesive backing with a release liner. The flexible material can be trimmed with standard scissors to fit any contour.
• Applications: Ideal for firewalls, marine engine bays, RVs, and race car tubs where mechanical fasteners cannot be utilized.

Product Specifications:
- Dimensions: 12 in. x 12 in.
- Thickness: 0.0065 in.
- Material: Fiberglass with aluminized foil
- MPN: 10460

Note: Do not apply Reflect-A-Cool directly to exhaust components or heat sources exceeding its direct temperature rating.