Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

• Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
• Use To Secure Panels/Seal Air Boxes/Wrap Wiring And More
• Strong Self Adhesive Backing
• Flexible And Easy To Apply

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• ProtProtect Wires/Cables/Hoses/Pipes/Tubing From Radiant Heatect Wires/Cables/Hoses/Pipes And Tubing From Radiant Heat
• Self-Adhesive Backing With Release Liner For Easy Installation
• Radiant Heat Protection Up To 2000 Degrees F
• Light Weight And Flexible-Trim To Size
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed
• 36 in. X 48 in. Sheet
• 0.0065 in. Thick

Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

• Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
• Use To Secure Panels/Seal Air Boxes/Wrap Wiring/More
• Strong Self-Adhesive Backing
• Flexible And Easy To Apply

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.

• Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• 1 in. X 3 ft.

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• Trim To Desired Length

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components.

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• Trim To Desired Length

Heat Screen(TM) solves the problem of heat from engines and exhaust intruding into interiors and components. Heat Screen(TM) offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060 in., Heat Screen(TM) features a thermal barrier on one side made of a superior reflective aluminized glass fiber surface, capable of withstanding direct heat up to 1200F. Heat Screen(TM) can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. DEI's Cool Tape(TM) is ideal for sealing and covering seams. Excellent protection for painted surfaces Withstands 1200F of direct heat Can be secured with adhesive or fasteners Trim to desired length DO NOT apply directly to exhaust components.

• Aluminized Surface Reflects Up To 2000 Degrees F Radiant /1200 Degrees F Direct
• 36 in. x 40 in. Aluminized Mylar Radiant Matting
• Can Be Secured With Adhesive Or Fasteners
• Excellent Protection For Painted Surfaces
• Trim To Desired Length
• Self Adhesive Backing

Heat Screen(TM) solves the problem of heat from engines and exhaust intruding into interiors and components. Heat Screen(TM) offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060 in., Heat Screen(TM) features a thermal barrier on one side made of a superior reflective aluminized glass fiber surface, capable of withstanding direct heat up to 1200F. Heat Screen(TM) can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. DEI's Cool Tape(TM) is ideal for sealing and covering seams. Excellent protection for painted surfaces Withstands 1200F of direct heat Can be secured with adhesive or fasteners Trim to desired length DO NOT apply directly to exhaust components.

• Aluminized Surface Reflects Up To 2000 Degrees F Radiant /1200 Degrees F Direct
• 36 in. x 20 in. Aluminized Mylar Radiant Matting
• Can Be Secured With Adhesive Or Fasteners
• Excellent Protection For Painted Surfaces
• Trim To Desired Length

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Say goodbye to heat soak and vapor lock in your 4.0L Jeep TJ Wrangler or XJ Cherokee with DEI’s Fuel Rail & Injector Cover Kit. Designed specifically for the legendary 4.0L engine, this kit helps restore smooth, consistent fuel delivery by shielding critical components, especially the vulnerable #3 injector, from damaging underhood heat.At the core is an ultra-resilient 8mm thick thermal barrier, compressed between dual heat-reflective aluminum layers to  block and deflect extreme radiant heat. Built for real-world Jeep conditions, the rugged construction stands up to high  temps, trail abuse, and daily driving alike.Each fuel rail and injector cover is crafted from premium high-temperature glass fiber with a reflective aluminum outer skin, keeping fuel system components cooler and operating at peak efficiency.Installation is quick and secure with integrated hook-and-loop closures

• Our kit includes everything you need for a professional installation:
• Protects Injectors/Fuel Rail From Engine Heat
• 1 Precision-fit manifold heat shield
• 6 Individual fuel injector covers
• 12 Viton fuel injector O-rings
• 1 Fuel rail heat cover

This Part Fits:

Adhesive backed transmission pan heat shield installs between the transmission pan and cross over pipe on JK Wranglers with VLP 42RLE 4 Speed transmissions. It blocks radiant heat from the exhaust, preventing heat soak into the transmission pan and fluid. The result - cooler transmission temps, improved performance, and longer component life.

Adhesive backed transmission pan heat shield installs between the transmission pan and cross over pipe on JK Wranglers with W5A580 transmissions. It blocks radiant heat from the exhaust, preventing heat soak into the transmission pan and fluid. The result—cooler transmission temps, improved performance, and longer component life.

Adhesive backed transmission pan heat shield installs between the transmission pan and cross over pipe on JL Wranglers & JT Gladiators with 850RE 8 speed transmissions. It blocks radiant heat from the exhaust, preventing heat soak into the transmission pan and fluid. The result—cooler transmission temps, improved performance, and longer component life.

We raised the bar. The most technologically advanced turbo shield ever! We incorporated all our experience to build the absolute best turbo shield on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, we developed the GEN-3 Onyx Black Turbo Shield. A Silicone coated Onyx Black outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available. OUTER SHELL - Coated in silicone to insulate and hold up under extreme conditions. - Prevents fraying & encases seams to make them over 4 times stronger INSULATION LAYER - Thick layer of silica insulation keep heat in turbo shield and turbo housing. - Silica has a low thermal conductivity making one of the best insulators. INNER LAYER - Stainless steel, glass fiber & silicone adds to insulating and thermal properties. - Increases seam strength, durability and insulation value. INNER COVER - Stainless Steel fabric holds up against the highest temps. - Will not break down or become brittle with heat. Measuring your turbo size DEI Turbo shield sizes are based on two basic measurements. The first measurement is the circumference of the turbo not including the flange. The second measurement is the width of the turbo at it's widest point not including the flanges. After measuring, refer to the chart below to find the correct shield. Our T22 and T25/28 shields are designed for use on internally gated housings. They will have a cutout in the wastegate area to allow for a tight fitment. TURBO MEASUREMENTS CHART TURBO - CIRCUMFERENCE - WIDTH T22 - 15" - 2.25" T25/28 - 15" / 16" - 2.5" T3 - 15" / 16" - 2.5" T4 - 20" / 22" - 2.75" T6 - 26" - 3.75"

• Glass fiber with stranded stainless inner layer.
• Riveted anchors incorporated to secure shield.
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Barrier layer of fine stainless mesh.
• Silica inner insulation layer.

We raised the bar. The most technologically advanced turbo shield ever! We incorporated all our experience to build the absolute best turbo shield on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, we developed the GEN-3 Onyx Black Turbo Shield. A Silicone coated Onyx Black outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available. OUTER SHELL - Coated in silicone to insulate and hold up under extreme conditions. - Prevents fraying & encases seams to make them over 4 times stronger INSULATION LAYER - Thick layer of silica insulation keep heat in turbo shield and turbo housing. - Silica has a low thermal conductivity making one of the best insulators. INNER LAYER - Stainless steel, glass fiber & silicone adds to insulating and thermal properties. - Increases seam strength, durability and insulation value. INNER COVER - Stainless Steel fabric holds up against the highest temps. - Will not break down or become brittle with heat. Measuring your turbo size DEI Turbo shield sizes are based on two basic measurements. The first measurement is the circumference of the turbo not including the flange. The second measurement is the width of the turbo at it's widest point not including the flanges. After measuring, refer to the chart below to find the correct shield. Our T22 and T25/28 shields are designed for use on internally gated housings. They will have a cutout in the wastegate area to allow for a tight fitment. TURBO MEASUREMENTS CHART TURBO - CIRCUMFERENCE - WIDTH T22 - 15" - 2.25" T25/28 - 15" / 16" - 2.5" T3 - 15" / 16" - 2.5" T4 - 20" / 22" - 2.75" T6 - 26" - 3.75"

• Glass fiber with stranded stainless inner layer.
• Riveted anchors incorporated to secure shield
• Ultimate thermal barrier reduces turbo lag.
• Silicone coated Onyx Black outer shell.
• Barrier layer of fine stainless mesh.
• Silica inner insulation layer.

Universal heat shield pads. Made from double sided high grade Stainless Steel with High Temperature insulation. Welded seams seal the insulation between the stainless steel making for a durable, long lasting shield. Grommet holes allow for easy mounting. Capable of withstanding up to 2000°F radiant heat. Can be hand formed to fit bends and curves. Durable 306 stainless steel Dual layer with high temperature insulation Withstands radiant temperatures up to 2000°F Welded edges for strength Integrated grommets for easy, secure mounting

• High Temp Insulation Encapsulated Between Stainless Sheets
• Made From Stainless Steel With Welded Seams
• Grommet Holes For Easy Install
• Conformable To Other Shapes
• Universal Fit
• Light Weight
• 12 x 12 in.

Made from durable 304 stainless steel and preformed with a curved shape to fit most any size pipes. Two layers of 304 stainless encapsulate a high temperature insulation, withstanding up to 2000°F radiant heat. Standoffs 1/2 in. high provide an air gap to the pipe and make mounting easy with provided stainless clamps. Features: Stainless Steel Heat Barrier material on outside surfaces Insulating inner layer Welded seams for strength and durability Stainless Steel stand offs to create air gap Advantages: Extremely light weight Block heat & protect components better than factory shields Easy to install with stainless straps Flexible to shape around pipes Benefits: Helps prevent burns & blocks uncomfortable heat Protects components from heat damage Increases driver & passenger comfort

• Semi Ridged Design Allows The Shield To Be Flexed For A Tight Fit
• Stainless Standoffs Provide A Secure Mounting Point And Air Flow
• Two Layers Of 304 Stainless Encapsulating Hi Temp Insulation
• Curve To Fit Most Pipe Sizes
• 6 in. x 12 in

Made from durable 304 stainless steel and preformed with a curved shape to fit most any size pipes. Two layers of 304 stainless encapsulate a high temperature insulation, withstanding up to 2000°F radiant heat. Standoffs 1/2 in. high provide an air gap to the pipe and make mounting easy with provided stainless clamps. Features: Stainless Steel Heat Barrier material on outside surfaces Insulating inner layer Welded seams for strength and durability Stainless Steel stand offs to create air gap Advantages: Extremely light weight Block heat & protect components better than factory shields Easy to install with stainless straps Flexible to shape around pipes Benefits: Helps prevent burns & blocks uncomfortable heat Protects components from heat damage Increases driver & passenger comfort

• Semi Ridged Design Allows The Shield To Be Flexed For A Tight Fit
• Stainless Standoffs Provide A Secure Mounting Point And Air Flow
• Two Layers Of 304 Stainless Encapsulating Hi Temp Insulation
• Curve To Fit Most Pipe Sizes
• 8.5 in. x 4.5 in.

We raised the bar. The most technologically advanced turbo shield ever! We incorporated all our experience to build the absolute best turbo shield on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, we developed the GEN-3 TITANIUM Turbo Shield. A Silicone coated TITANIUM LR outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available. OUTER SHELL Coated in silicone to insulate and hold up under extreme conditions. Prevents fraying & encases seams to make them over 4 times stronger. INSULATION LAYER Thick layer of silica insulation keep heat in turbo shield and turbo housing. Silica has a low thermal conductivity making one of the best insulators. INNER LAYER Stainless steel, glass fiber & silicone adds to insulating and thermal properties. Increases seam strength, durability and insulation value. INNER COVER Stainless Steel fabric holds up against the highest temps. Will not break down or become brittle with heat.

• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• Final Barrier Layer Of A Fine Stainless Steel Mesh
• Riveted Anchors Incorporated To Secure Shield
• Ultimate Thermal Barrier Reduces Turbo Lag
• Custom Fit For Easy Install

We raised the bar. The most technologically advanced turbo shield ever! We incorporated all our experience to build the absolute best turbo shield on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, we developed the GEN-3 TITANIUM Turbo Shield. A Silicone coated TITANIUM LR outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available. OUTER SHELL Coated in silicone to insulate and hold up under extreme conditions. Prevents fraying & encases seams to make them over 4 times stronger. INSULATION LAYER Thick layer of silica insulation keep heat in turbo shield and turbo housing. Silica has a low thermal conductivity making one of the best insulators. INNER LAYER Stainless steel, glass fiber & silicone adds to insulating and thermal properties. Increases seam strength, durability and insulation value. INNER COVER Stainless Steel fabric holds up against the highest temps. Will not break down or become brittle with heat.

• New Inner Layer Made From Glass Fiber And Stainless Steel Thread
• Outer Shell Made With Our Titanium Material Coated In Silicone
• Thick Insulation Layer Made From Silica To Contain Turbo Heat
• Final Barrier Layer Of A Fine Stainless Steel Mesh
• Riveted Anchors Incorporated To Secure Shield
• Ultimate Thermal Barrier Reduces Turbo Lag
• Custom Fit For Easy Install

Designed for severe duty use, ONYX(TM) Starter Shield offers the highest level of protection for starters from potential failure caused by under hood heat soak conditions. Constructed of two layers of material, a highly reflective outer layer combined with a high heat inner layer. Able to withstand direct heat of up to 1350F, ONYX(TM) Starter Shield is the perfect choice for high heat applications where engine heat soak is a problem. 7 in.W x 24 in.L Size Hook & loop fastening system Length can be trimmed to size

• Hook And Loop Fastening System
• Protects Up To 1350 Degrees F
• Length Can Be Trimmed To Size
• 7 in. x 24 in. Size
• Dual Layer Design
• Black Onxy Color

Designed for severe duty use, the Ultra 47(TM) Starter Shield offers the highest level of protection for starters from potential failure caused by under hood heat soak conditions. Constructed of two layers of material, a highly reflective outer layer combined with a high heat inner layer. Able to withstand direct heat of up to 1350°F, Ultra 47(TM) Shield is the perfect choice for high heat applications where engine heat soak is a problem. 7 in.W x 24 in.L Size Hook & loop fastening system Length can be trimmed to size

• Length Can Be Trimmed To Size
• Hook/loop Fastening System
• 7 in. W X 24 in.L Size
• Made In The USA

Adapt-A-Shield XT is a formable, flexible, extreme heat barrier to reflect engine and exhaust heat from components and protect against abrasion. It easily conforms to odd shapes and can be cut with scissors or a utility knife. Fasten it where needed with straps or DEI stainless steel ties for a professional finish. DO NOT apply directly to exhaust components.

• Reflects engine & exhaust heat from components & protects against abrasion
• Ultra flexible. Easy to conform to odd shapes - easy to cut with scissors
• Aluminum with poly-glass cloth backing .011” total thickness
• Fasten with straps or DEI stainless steel ties
• Temp Range -40F to 392F at 24mm
• 12” x 17.5” sheet

Universal mounting kit for rigid or semi-rigid heat shields. Includes six 1/2 in. tall stainless steel standoffs with hardware. 1/2 in. tall stainless steel standoffs Includes mounting hardware

• Includes 6 Stainless Standoff Brackets
• 1/2 in. Tall Stainless Standoffs
• Includes Mounting Hardware

Locking Tie tool solves the problem of not being able to get stainless locking ties tight. An effective tool to tighten Stainless Steel Locking Ties. Saves time and hassle while providing a professional looking result. Slide the tool on the end of any 1/4 in. nut driver, engage the tie and twist. Fits on the end of any 1/4 in. drive extension Works with all popular styles of stainless ties up to 1/2 in. wide Made from hardened tool steel Black oxide coated for years of trouble-free use

• Works With All Popular Styles Of Stainless Ties Up To 1/2 in. Wide
• Black Oxide Coated For Years Of Trouble-Free Use
• Fits On The End Of Any 1/4 in. Drive Extension
• Made From Hardened Tool Steel