Protecting vital engine components from heat is tough, especially when it comes to fitting into the nooks and crannies of the engine bay. Mishimoto has devised a solution with our Aluminum Silica Heat Barrier. Our heat barrier is constructed from woven silica and aluminum mylar for protection of up to 2000 F of radiant heat and can wIt'stand 1200 F of direct heat. This heat barrier also features an adhesive backing for simple installation on uneven and tight spaces, and can be easily trimmed to suit the installation space. The Mishimoto Aluminum Silica Heat Barrier is available in two sizes, 12?x24? and 24?x24? to fit the size of your project, and includes the Mishimoto Lifetime Warranty.

• Constructed from woven silica and aluminum mylar for superior heat protection
• Rated up to 2000F of radiant heat, and direct contact up to 1200F
• Capable of reflecting 90-percent of radiant heat

Protecting vital engine components from heat is tough, especially when it comes to fitting into the nooks and crannies of the engine bay. Mishimoto has devised a solution with our Aluminum Silica Heat Barrier. Our heat barrier is constructed from woven silica and aluminum mylar for protection of up to 2000 F of radiant heat and can wIt'stand 1200 F of direct heat. This heat barrier also features an adhesive backing for simple installation on uneven and tight spaces, and can be easily trimmed to suit the installation space. The Mishimoto Aluminum Silica Heat Barrier is available in two sizes, 12?x24? and 24?x24? to fit the size of your project, and includes the Mishimoto Lifetime Warranty.

• Constructed from woven silica and aluminum mylar for superior heat protection
• Rated up to 2000F of radiant heat, and direct contact up to 1200F
• Capable of reflecting 90-percent of radiant heat

Protecting vital engine components from heat is tough, especially when it comes to fitting into the nooks and crannies of the engine bay. Mishimoto has devised a solution with our Gold Reflective Barrier. Our heat barrier is constructed from metalized polyamide polymer laminated glass cloth for protection of up to 850 F of continuous heat. This heat barrier also features an adhesive backing for simple installation on uneven and tight spaces and can be easily trimmed to suit the installation space. The Golf Reflective Barrier is available in two sizes, 12?x24? and 24?x24? to fit the size of your project and includes the Mishimoto Lifetime Warranty.

• Adhesive backing and trimmable for a simple and custom installation
• Constructed from metalized polyamide polymer laminated glass cloth
• Rated for up to 850F of continuous temperature

Protecting vital engine components from heat is tough, especially when it comes to fitting into the nooks and crannies of the engine bay. Mishimoto has devised a solution with our Gold Reflective Barrier. Our heat barrier is constructed from metalized polyamide polymer laminated glass cloth for protection of up to 850 F of continuous heat. This heat barrier also features an adhesive backing for simple installation on uneven and tight spaces and can be easily trimmed to suit the installation space. The Golf Reflective Barrier is available in two sizes, 12?x24? and 24?x24? to fit the size of your project and includes the Mishimoto Lifetime Warranty.

• Adhesive backing and trimmable for a simple and custom installation
• Constructed from metalized polyamide polymer laminated glass cloth
• Rated for up to 850F of continuous temperature

Mishimoto Heat Defense Tape can be used to reflect heat and protect sensitive engine components from high engine temperatures.Heat Defense is constructed of highly reflective metalized polyimide film, the same material used by the space industry to protect sensitive instruments from high temperatures.The film is laminated to glass cloth using a high temperature laminating adhesive.Heat Defense wIt'stands up to 675 F of radiant heat and self-adheres using a high temperature pressure sensitive adhesive, which is protected by an easy to remove protective backing.

• Reflects heat and protects sensitive engine components from high temperatures
• Constructed of highly reflective metalized polyimide film
• Withstands up to 675 F

Mishimoto Heat Defense Tape can be used to reflect heat and protect sensitive engine components from high engine temperatures.Heat Defense is constructed of highly reflective metalized polyimide film, the same material used by the space industry to protect sensitive instruments from high temperatures.The film is laminated to glass cloth using a high temperature laminating adhesive.Heat Defense wIt'stands up to 675 F of radiant heat and self-adheres using a high temperature pressure sensitive adhesive, which is protected by an easy to remove protective backing.

• Reflects heat and protects sensitive engine components from high temperatures
• Constructed of highly reflective metalized polyimide film
• Withstands up to 675 F

DEI's Speed Tape(TM) has multiple uses including race applications, temporary damage repairs and taping body seams to name a few. Speed Tape(TM) tears straight and easy every time and is available in eight colors as well as the popular checker-board. Color Rolls 2 in. x 90 ft Checker-board Roll 2 in. x 45 ft

• Race Applications/Temporary Damage Repairs/Taping Body Seams
• Available In 8 Colors And Checker Board
• Tears Straight And Easy Every Time
• 2in x 45ft Roll
• Multiple Uses

Is radio frequency interference wreaking havoc on your vehicle's electronics? Are on-board radios, fuel injection systems, and other electronic devices falling victim to disruptive signals? DEI RFI Wire Mesh Tape is the ultimate defender against RFI.

• Designed for hassle-free installation, DEI's RFI Wire Mesh Tape seamlessly integrates into your vehicles existing wiring system. No complex modification is needed- just wrap and protect.
• Say goodbye to static and interruptions. DEI's RFI Wire Mesh Tape ensures clear radio reception allowing you to enjoy your favorite stations without compromise.
• Includes 2ft of DEI Quick-Fix Tape to tape around the ends for a finished clean look.
• Conveniently wraps around existing wires so installation is quick and easy.
• Tape measures 1 width x 25ft length.
• A 17.5 grounding strap included.

High performance Quick Fix Tape bonds to itself and is self-curing, forming a waterproof permanent seal. It's ideal for emergency hose repair, non-slip grip surface for tools, electrical splices and connections, serves as a temporary leak sealer, and does not leave a sticky residue after removal. Just a few of it's many uses. Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape is adhesive-free, has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape. Withstands temperatures from -65F (-54C) to 500F (260C) Seal hoses, bundle & wrap wires, weatherproof connections & more Can be applied to wet surfaces Permanent air / liquid tight seal Adhesive-free 700psi tensile strength Insulating capabilities up to 8,000 volts Stretches 3x length 1 in. wide x 12 ft roll

• Withstands Temperatures From-60 degrees F/-54 degrees C To 500 degrees F/260 degrees C
• Seal Ends Of Hoses/Bundle Wires/Weatherproof Connections
• Resists Solvents/Oils/Fuel/Acids And Chemical Spills
• 700Psi Tensile Strength And Stretches 3X Length
• Corrosion And Moisture Resistant
• Permanent Air/Liquid Tight Seal
• Can Be Applied To Wet Surfaces
• 1 in. Wide X 12 ft. Roll
• Adhesive-Free

Fire Tape is a multi use self-fusing tape that can be used to cover wires, seal temporary leaks, and much much more. Made of a non-adhesive silicone rubber, Fire Tape is waterproof, remains flexible, and does not leave a sticky residue after removal. Ideal for use with Fire Sleeve and other DEI line & hose protective sleeving products, this self-adhesive tape serves as an excellent insulating alternative to vinyl tapes and wraps. Other uses include wrapping wiring harnesses, cover and protect wire splices, and electrical wire terminations. Corrosion & moisture resistant Stretch & wrap application 700 psi tensile strength Permanent air/liquid tight seal Withstands 500°F direct continuous heat Self-bonding and self-curing Does not harden - remains flexible 1 inch wide x 36 feet

• Withstands 500 Degrees F Direct Continuous Heat
• Withstands 500Degrees F Direct Continuous Heat
• Corrosion And Moisture Resistant
• Does Not Harden Remains Flexible
• Permanent Air/Liquid Tight Seal
• Stretch And Wrap Application
• Self-Bonding And Self-Curing
• 36 ft. x 1 in. Wide Roll
• 700 psi Tensile Strength

Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

• Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
• Use To Secure Panels/Seal Air Boxes/Wrap Wiring And More
• Strong Self-Adhesive Backing
• Flexible And Easy To Apply

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• Self-Adhesive Backing With Release Liner For Easy Installation
• Radiant Heat Protection Up To 2000 Degrees F
• Light Weight And Flexible-Trim To Size
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 24 in. x 24 in. sheet
• 0.0065 in. Thick

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• Self-Adhesive Backing With Release Liner For Easy Installation
• Radiant Heat Protection Up To 2000 Degrees F
• Light Weight And Flexible-Trim To Size
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 12 in. x 24 in. sheet
• 0.0065 in. Thick

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• Self-Adhesive Backing With Release Liner For Easy Installation
• Radiant Heat Protection Up To 2000 Degrees F
• Light Weight And Flexible-Trim To Size
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 12 in. x 12 in. Sheet
• 0.0065 in. Thick

Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

• Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
• Use To Secure Panels/Seal Air Boxes/Wrap Wiring And More
• Strong Self Adhesive Backing
• Flexible And Easy To Apply

Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

• Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
• Use To Secure Panels/Seal Air Boxes/Wrap Wiring And More
• Strong Self Adhesive Backing
• Flexible And Easy To Apply

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• ProtProtect Wires/Cables/Hoses/Pipes/Tubing From Radiant Heatect Wires/Cables/Hoses/Pipes And Tubing From Radiant Heat
• Self-Adhesive Backing With Release Liner For Easy Installation
• Radiant Heat Protection Up To 2000 Degrees F
• Light Weight And Flexible-Trim To Size
• Moisture And Solvent Resistant
• Virtually NO Clearance Needed
• 36 in. X 48 in. Sheet
• 0.0065 in. Thick

Cool Tape(TM) is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape(TM) is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! *DO NOT apply directly to exhaust components.

• Withstands Direct Heat Up To 400 Degrees F And 2000 Degrees F Radiant Heat
• Use To Secure Panels/Seal Air Boxes/Wrap Wiring/More
• Strong Self-Adhesive Backing
• Flexible And Easy To Apply

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off Tape is available in 1-1/2 in. to 2 in. wide rolls *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Reflect-A-GOLD(TM) solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065 in. thick Easy to apply, won't lift off *DO NOT apply directly to exhaust components.

• Adhesive Protected By Release Liner Rated Up To 325 Degrees F
• For Firewalls/Bulkheads/Engine Covers/Floors/Seat Bottoms
• Resists UV Degradation For Long-Term Performance
• Handles Continuous Temps Up To 800 Degrees F
• Light Weight And Flexible-Trim To Size
• Virtually NO Clearance Needed
• Easy To Apply- Wont Lift Off
• 0.0065 in. Thick

Adapt-A-Shield XT is a formable, flexible, extreme heat barrier to reflect engine and exhaust heat from components and protect against abrasion. It easily conforms to odd shapes and can be cut with scissors or a utility knife. Fasten it where needed with straps or DEI stainless steel ties for a professional finish. DO NOT apply directly to exhaust components.

• Reflects engine & exhaust heat from components & protects against abrasion
• Ultra flexible. Easy to conform to odd shapes - easy to cut with scissors
• Aluminum with poly-glass cloth backing .011” total thickness
• Fasten with straps or DEI stainless steel ties
• Temp Range -40F to 392F at 24mm
• 12” x 17.5” sheet

DEI's Black Seaming Tape is ideal for using with our Black Floor & Tunnel for edge and seam sealing. Made with a glass fiber scrim, high temperature adhesive, and durable black finish. Adds the finishing touch. Hides the seams and edges for our Black Floor & Tunnel Works great as a universal black tape Easy to apply Adhesive good up to 311°F Excellent abrasion resistance Solvent resistant .007 in. thick Tensile Strength: 175 lbs./in. Dielectric strength: 2500V Adhesion to Steel: 50oz./in. Made in the USA *DO NOT apply directly to exhaust components.

• Easy To Apply/Adhesive Rated Up To 311 Degrees F
• Works Great As A Universal Black Tape
• Excellent Abrasion Resistance
• Tensile Strength 175 lbs/in.
• Adhesion To Steel. 50oz/in.
• Dielectric Strength 2500V
• Solvent Resistant
• Made In The USA
• .007 in. Thick