Fits 2015-2020 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, SSV, and Police Responder.

The Ford Performance Fox 2.0 Performance Series IFP (Internal Floating Piston) shock kit is engineered to level your truck's stance while significantly improving off-road capability without sacrificing on-road comfort. This proprietary system features specialized valving developed by Ford Performance engineers to optimize ride quality across diverse terrains. By replacing factory components with precision-tuned Fox damping, this kit increases the front approach angle to 31.0 degrees (up from 26.0 stock) and the breakover angle to 23.0 degrees (up from 21.0 stock), providing the clearance needed for technical trails.

• Manufacturer Part Number: M-18000-F15AA
• Shock Bodies: Precision impact-extruded 6061-T6 billet aluminum for superior heat dissipation
• Shafts: 5/8-inch hard chrome-plated heat-treated alloy steel
• Sealing: Redundant sealing pack system with main seal, wiper seal, and scraper seal
• Bushings: Quiet nitrile rubber for increased suspension articulation
• Valving: Ford Performance-specific race-developed high-flow piston design
• Finish: Hard-anodized for long-term corrosion resistance
• Installation: Direct bolt-on design requiring no additional modifications

Fits 2015-2023 Ford Mustang EcoBoost, GT, and V6 models (Excludes GT350 and GT350R).

Eliminate the factory hood prop rod with this gas-charged hood lift kit from Ford Racing. These struts are engineered to provide a controlled, assisted opening and a secure hold for both OEM and specialty hoods. Rated at 90 lbs each, these dampers ensure the hood remains firmly in the raised position, preventing it from being dislodged by wind or accidental contact during service.

• Gas-charged struts rated at 90 lbs of lift capacity
• Lightweight steel and aluminum construction for long-term durability
• Corrosion-resistant black powdercoat finish
• Laser-engraved Ford logo for a clean, professional appearance
• Replaces standard factory prop rod
• Manufacturer Part Number: M-16826-MA

Fits select 2005-2014 Ford Mustang models including Base, GT, Boss 302, Bullitt, and Shelby GT/GT500.

Replace your factory prop rod with the Ford Performance Hood Lift Kit for a cleaner engine bay and easier maintenance. This kit utilizes gas-charged struts that take over the lifting action, smoothly raising the hood and holding it firmly at the raised position. Rated at 90 lbs, these struts are engineered to support both OEM hoods and many specialty aftermarket hoods without the risk of wind or accidental bumps knocking the hood down.

Constructed for long-term durability and visual appeal, each strut features a laser-engraved Ford Performance logo. This bolt-on upgrade provides a professional, factory-plus look while improving under-hood accessibility.

• Manufacturer Part Number: M-16826-M
• Strut Rating: 90 lbs
• Finish: Black with laser-engraved Ford Performance logo
• Fits 2005-2014 Mustang (Base, GT, Shelby, Boss 302, Bullitt)
• Includes all necessary mounting hardware and instructions

Fits 2021-2025 Ford Bronco models.

Eliminate the factory prop rod and improve engine bay accessibility with the Ford Racing Hood Lift Kit. This system utilizes black e-coated, progressive-rate gas struts to provide a smooth, controlled opening, slowing the hood's travel as it reaches its final position. Once fully raised, the hood sits approximately 8 inches higher than the factory prop rod height, providing significantly more room for maintenance and engine work.

Built for durability and an OEM-level finish, the kit features mounting brackets made from zinc-plated steel with a rugged black powder-coated finish for superior corrosion resistance. The installation is straightforward and non-destructive, utilizing existing factory mounting holes and fasteners to maintain a clean appearance under the hood.

• Manufacturer Part Number: M-16826-B
• Fits all 2021-2025 Ford Bronco trims including Raptor and Badlands
• Provides approximately 8 inches of additional hood clearance over stock
• Zinc-plated steel brackets with black powder-coat finish
• Black E-coated progressive-rate gas struts
• Complete kit includes all necessary mounting brackets and hardware
• Direct bolt-on installation with no drilling required
• Four-year manufacturer warranty

Vehicle Fitment

Fits 1967-1973 Ford Mustang including Base, Boss 302/351/429, Grande, Mach 1, and Shelby GT-350/GT-500 models.

Achieve a classic competition look for your vintage pony car with the Ford Racing Hood Latch and Pin Kit. This assembly is modeled after the original hardware found on legendary early-generation Mustangs and Fairlanes, providing the authentic race-inspired aesthetic and secure hood tie-down required for high-performance applications. Engineered for versatility, these pins are compatible with most factory steel and aftermarket fiberglass hoods.

• Manufacturer Part Number: M-16700-A
• Classic competition styling inspired by early Ford factory race programs
• Compatible with factory and most aftermarket hoods
• Provides additional security for high-speed performance or track use
• Complete kit including pins, scuff plates, and lanyards
• Application Note: Not designed for use with 2005 and newer Mustang models

Fits 2020-2022 Ford Mustang Shelby GT500.

Upgrade your S550 Shelby GT500 with this Ford Racing Carbon Fiber Hood Vent Kit. Designed as a direct replacement for original equipment components, this kit enhances your Mustang's exterior with authentic carbon fiber while maintaining the factory rain tray attachment strategy for a secure, OE-level fit. The kit features a dual-finish approach to provide both high-visibility gloss and a refined underside appearance.

• Direct replacement of OE hood components
• Includes Gloss Finish Carbon Fiber Hood Vent
• Includes Matte Finish Carbon Fiber Rain Tray
• Maintains factory rain tray mounting and attachment points
• Manufacturer Part Number: M-16612-C20

Fits 2018-2021 Ford Mustang GT.

Improve the aerodynamic balance and high-speed stability of your vehicle with the Ford Performance Performance Pack 2 (PP2) Front Splitter Kit. This kit provides the aggressive track-ready styling and increased front-end downforce found on factory PP2-equipped Mustangs. It is designed to mount directly to the 2018-2021 GT front fascia, replacing or upgrading the existing air dam for a more technical appearance and improved airflow management.

• Genuine Ford Performance Part Number: M-16601-MPP
• Original equipment on the Mustang Performance Pack 2 (PP2)
• Engineered to increase downforce for improved front-end grip at speed
• Durable, impact-resistant construction with a textured black finish
• Includes all required installation hardware for a factory-level fit

Fits 2020-2022 Ford Mustang Shelby GT500 models.

Enhance the aerodynamics and track-ready aesthetics of your Mustang with the Ford Racing Carbon Fiber Front Splitter Kit. This high-performance upgrade is engineered as a direct replacement for original equipment components, utilizing lightweight dry carbon fiber construction to achieve a weight reduction of 4 lbs compared to factory parts.

Each component is finished with a premium clear-coat to protect the weave and ensure long-lasting durability. The splitter features the iconic Shelby insignia, maintaining the authentic heritage of the GT500 while optimizing front-end airflow and downforce. This comprehensive kit includes both the front splitter and the matching carbon fiber belly pan for a complete underbody solution.

• Manufactured from lightweight dry carbon fiber with a clear-coat finish
• Provides a 4lb weight reduction over stock OE components
• Direct-fit replacement for factory splitter and belly pan
• Features embossed Shelby insignia for an authentic look
• Includes Carbon Fiber Front Splitter and Carbon Fiber Belly Pan
• Manufacturer Part Number: M-16601-MCF

Fits 2020-2022 Ford Mustang Shelby GT350, GT350R, and GT500.

Enhance the rear profile of your S550 Shelby with this Ford Performance Carbon Fiber Rear Deck Lid Trim Panel. This component is a direct replacement for the factory OE trim piece, offering a precise fit and a significant visual upgrade using premium materials. The panel features an authentic Shelby Cobra snake emblem pre-installed for a complete, factory-plus look.

Constructed using a high-quality vacuum-infused process with 3K carbon fiber, the panel utilizes a 2x2 twill weave pattern for consistent depth and texture. The piece is finished in a high-gloss clear coat to protect the carbon fiber from UV degradation and environmental wear while maintaining a deep, lustrous shine.

• Authentic 2x2 twill carbon fiber cloth construction
• Vacuum infused 3K carbon fiber for high strength-to-weight ratio
• Direct replacement for the factory rear deck lid panel
• High-gloss finish provides durability and UV protection
• Includes pre-installed Cobra snake emblem
• Manufacturer Part Number: M-16600-MCF

Fits select 2015-2021 Ford Mustang models (V6, EcoBoost, GT, Bullitt, Shelby, and Mach 1).

Give the rear of your S550 a clean, custom aesthetic with this Ford Performance Deck Lid Trim Panel. This genuine gloss black component is pulled from the 2018 production mold before mounting holes for the factory horse or GT badges are added, providing a smooth "blank canvas" for owners who prefer a debadged look or custom emblems. The panel is designed to be a direct replacement for the factory trim and maintains the necessary provision for the rear-mounted backup camera.

• Manufacturer Part Number: M-16600-MA
• Finish: Gloss Black
• Construction: Production 2018 Mustang mold without badge mounting holes
• Retains factory rear-view camera mounting provision
• Fits all 2015-2021 Mustang body styles

Fits select 2015-2023 Ford Mustang models, including EcoBoost, GT, Bullitt, Mach 1, and Shelby GT350/GT500.

Improve the aerodynamic profile and rear-end downforce of your S550 with the Ford Racing Track Pack Rear Spoiler. This component is the same spoiler found on the Shelby GT350 Track Pack, engineered to provide increased stability at speed while maintaining a factory-integrated appearance. It serves as a direct upgrade for owners looking to transition from a base spoiler or a wingless trunk lid to a more aggressive, race-inspired aesthetic.

Constructed to OE standards for fit and finish, this spoiler (M-16600-GT350A) ensures long-term durability and precise alignment with the trunk's contours. It comes in a ready-to-install finish and utilizes standard mounting procedures for a clean installation.

• Manufacturer Part Number: M-16600-GT350A
• Design: GT350 Track Pack Style
• Full Fitment Span: 2015-2023 Ford Mustang
• Enhances high-speed stability and downforce
• Direct fit for all 2015-2023 Mustang submodels

Fits 2021-2025 Ford F-150 Raptor.

Upgrade your vehicle's exterior styling with the Ford Racing Carbon Fiber Fender Vent Set. These vents are engineered as direct replacements for the factory OE components, ensuring a seamless fit without modifications. Each piece is crafted from premium 3K, 2x2 twill carbon fiber cloth and produced using a high-pressure autoclave process for maximum structural integrity and a lightweight profile.

• Material: 3K, 2x2 Twill Carbon Fiber cloth
• Finish: High-Gloss clear coat
• Manufacturing: Autoclave process for precision and durability
• Direct replacement for original equipment fender vents
• Complete kit: Includes driver and passenger side vents
• Includes all required fasteners and installation hardware
• Manufacturer Part Number: M-16026-FG

Fits 2023-2025 Ford F-250 and F-350 Super Duty trucks (XL, XLT, Lariat, King Ranch, and Platinum).

Replace your factory blue emblems with this premium Ford Racing Black Oval Kit to give your truck a sleek, customized appearance. This kit is specifically engineered for 2023-2025 Super Duty models equipped with camera systems, featuring precise cutouts and mounting provisions that ensure your front and/or rear cameras retain their factory alignment and field of view. These are not simple overlays; they are high-quality replacement emblems designed to withstand the elements while maintaining a perfect fit and finish.

• Direct replacement for OEM blue ovals
• Sleek black finish provides a modern, aggressive look
• Fully compatible with factory camera-equipped housings
• Engineered to factory tolerances for a secure, rattle-free installation
• Kit includes necessary hardware for a complete installation
• Manufacturer Part Number: M-1447-SDC3

Fits 2015-2023 Ford Mustang GT, GT Premium, and 50 Years Limited Edition models (5.0L). This Ford Racing emblem serves as a direct replacement for original equipment, allowing you to swap out chrome factory badges for a clean, blacked-out aesthetic.

• Manufactured from durable injection-molded plastic to withstand weather and UV exposure
• Finished in a sleek black to provide a custom look while maintaining factory proportions
• Features pre-applied two-way adhesive tape for a precise and secure peel-and-stick installation
• Designed to mount directly to the fender in the original factory location
• Manufacturer Part Number: M-1447-M50AB

Fits 2021-2024 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, and Wildtrak).

Personalize your vehicle with the Ford Racing G.O.A.T. (Goes Over Any Type of Terrain) badge. This black-on-chrome emblem is engineered to provide a factory-quality accent to your exterior or interior. Made from silk-screened, vacuum-formed ABS plastic, the badge is designed to withstand harsh environments without fading or degrading.

Installation is straightforward using the pre-applied automotive-grade double-sided tape on the back of the emblem. This badge is versatile enough to be mounted on flat surfaces including tailgates, fenders, doors, or engine covers, allowing for a custom OE-style look.

• Manufacturer Part Number: M-1447-GOAT
• Dimensions: 4.5 in. Long x 1.36 in. Wide
• Material: Silk-screened vacuum-formed ABS
• Finish: Black on Chrome
• UV-resistant coating for long-term durability
• Mounting: Automotive-grade adhesive backing
• Sold individually

Fits select 2021-2025 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, and Tremor.

Enhance the exterior aesthetics of your truck with this genuine Ford Performance Fender Vent Kit. Designed specifically for the 14th-generation F-150, these vents provide a more aggressive and custom look to the front fender area. As a Ford Performance part, this kit is engineered to exact factory standards for precise fitment and long-term durability against the elements.

• Manufacturer Part Number: M-1447-FPVENT
• Compatible with 2021-2025 Ford F-150 models
• Genuine Ford Performance accessory for factory-level fit and finish
• Designed to complement the factory body lines
• Includes all necessary components for a complete vent upgrade

Vehicle Fitment

• 2021-2025 Ford F-150 King Ranch
• 2021-2025 Ford F-150 Lariat
• 2021-2023 Ford F-150 Limited
• 2021-2025 Ford F-150 Platinum
• 2021-2025 Ford F-150 Police Responder
• 2025 Ford F-150 Raptor
• 2021-2025 Ford F-150 SSV
• 2024-2025 Ford F-150 STX
• 2021-2025 Ford F-150 Tremor
• 2021-2025 Ford F-150 XL
• 2021-2025 Ford F-150 XLT

Fits 2018-2023 Ford F-150 models (King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT) without a front camera provision.

Give your truck a stealthy, custom look with this Ford Racing Black Oval Emblem Kit. This kit replaces the traditional blue factory ovals with a refined black and smoked chrome finish for a cohesive, modern aesthetic. These are direct-replacement components, ensuring a factory-level fit and finish on your truck's front grille and tailgate.

• Direct replacement for OEM front and rear emblems
• Features a sleek black finish with smoked chrome accents
• Includes front smoked chrome oval designed for models without camera provision
• Includes matching rear smoked chrome oval
• Manufactured to high-quality standards for long-term durability
• Manufacturer Part Number: M-1447-F15B

Note: This kit is not compatible with base XL and XLT models using certain grille configurations; verify your specific grille type before installation.

Enhance the visual appeal of any EcoBoost-powered vehicle or project with this official Ford Racing emblem set. Designed for universal application, these badges offer a clean, factory-inspired look that complements engine covers, fenders, hatches, and interior surfaces.

• Manufacturer Part Number: M-1447-EBBLK
• Dimensions: 3.5" L x 0.5625" W (3-1/2 in. x 9/16 in.)
• Quantity: Set of two (2) emblems
• Finish: Two-tone Black and Silver
• Installation: Pre-applied automotive-grade double-sided tape for a secure, peel-and-stick mount
• Origin: Made in the USA

Fits 1996-1998 Ford Mustang SVT Cobra.

This Ford Racing Upper Intake Manifold Plaque (M-1447-D46) provides a factory-quality finishing touch for the 4.6L 4V DOHC engine found in SN95-generation Cobras. Made in the USA, this plaque is designed in the iconic shape of the Cobra snake, featuring a high-relief embossed design with a striking blue inlay set against a brushed aluminum background. It restores the signature under-hood aesthetic of your Mustang, mounting securely to the factory upper intake manifold location.

• Authentic Ford Racing design with high-relief embossed Cobra snake
• Vibrant blue inlay on a classic brushed aluminum background
• Measures 4 in. H x 2.25 in. W for precise fitment
• Includes pre-applied two-way adhesive tape for simple, tool-free installation
• Proudly manufactured in the USA
• Manufacturer Part Number: M-1447-D46

Fits 2021-2024 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, and Wildtrak).

Give your vehicle a stealthy, custom look with the Ford Racing Matte Black Rear Bronco Emblem. Originally featured on the Bronco Raptor, this emblem is a premium aesthetic upgrade for any sixth-generation Bronco owner looking to replace chrome or silver factory badges. It is constructed from durable, injection-molded plastic to withstand exposure to the elements and trail debris.

Installation is straightforward and requires no drilling or permanent modifications. The emblem includes pre-applied two-way adhesive tape, allowing it to mount securely to the factory locations on the rear tailgate. This genuine Ford Racing component (M-1447-BRMB) ensures precise fitment and a factory-level finish.

• Finish: Matte Black
• Material: Injection-molded plastic
• Installation: Pre-applied high-strength two-way tape
• Design: Original equipment on Bronco Raptor
• Manufacturer Part Number: M-1447-BRMB

Fits 2021-2025 Ford Bronco (All trims including Badlands, Raptor, Heritage Edition, and Wildtrak).

Transform the front-end aesthetics of your vehicle with the Ford Racing Sinister Bronze Front Grille Lettering Overlay Kit. This kit is engineered to provide a custom appearance by applying individual B-R-O-N-C-O emblem overlays directly over your existing production grille letters. Designed for long-term durability, the finish is resistant to peeling and weathering, and it is fully car wash safe.

Installation is straightforward and requires no drilling or permanent modifications. Each letter features pre-applied 3M automotive-grade adhesive backing for a secure, long-lasting bond that aligns perfectly with the factory contours.

• Precision-engineered to overlay factory 2021-2025 Bronco grille lettering
• Unique Sinister Bronze finish for a distinctive, custom look
• Durable construction resistant to UV weathering and peeling
• Simple peel-and-stick installation with pre-applied 3M adhesive
• Includes individual B-R-O-N-C-O emblem overlays
• Car wash safe and weather-resistant
• Manufacturer Part Number: M-1447-BLBR

Fits 2021-2025 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, Stroppe Edition, and Wildtrak.

Update your vehicle's aesthetics with the Ford Racing Sinister Bronze rear emblem overlay. This precision-engineered component is designed to align perfectly over your existing factory badge, providing a custom look without the need for complex tool-based removal or drilling. The Sinister Bronze finish offers a unique, muted metallic tone that complements any paint color.

Constructed for long-term durability, this overlay features a robust finish that is car wash safe and resistant to peeling, fading, or weathering. Installation is straightforward using the pre-applied high-strength 3M adhesive backing, ensuring a secure bond to the factory mounting surface.

• Manufacturer Part Number: M-1447-BEBR
• Finish: Sinister Bronze
• Installation: Tool-free overlay with 3M adhesive backing
• Quantity: (1) Rear Emblem Overlay
• Durability: UV and weather-resistant; car wash safe
• Compatibility: Fits over production rear badge

Fits 2015-2023 Ford Mustang (V6, EcoBoost, GT, Bullitt, Mach 1, and Shelby GT350/GT500).

Add an authentic motorsport touch to your interior with the Ford Performance Dash Emblem. As used by the Ford Performance team on factory-built race cars, this emblem is designed for a precise fit on the passenger-side dashboard of S550-generation Mustangs.

• Authentic Ford Performance component as used on factory race vehicles
• Designed for passenger-side dashboard placement
• Simple peel-and-stick installation with pre-applied 2-sided adhesive tape
• Manufacturer Part Number: M-1447-A

Fits select 2018-2023 Ford Mustang models including EcoBoost, GT, Bullitt, Mach 1, and Shelby GT350/GT500.

Update your S550’s rear profile with the Ford Performance Clear Tail Lamp Kit. These LED housings provide a high-contrast, modern aesthetic and are the same components featured in the factory Ice White Appearance and Stealth Packages. Designed for a direct fit, these lamps maintain the signature Mustang styling while offering a unique clear-lens look.

• Complete pair includes both driver and passenger side assemblies
• Retains factory sequential turn signal functionality
• Direct-fit LED technology for 2018+ refresh models
• Matches Ice White and Stealth Package styling
• Manufacturer Part Number: M-13504-MC

The Ford Performance ProCal 4 (MPN: M-12655-F) is a sophisticated calibration delivery and diagnostic tool designed to interface with Ford Performance Control Packs and compatible engine systems. This handheld device connects directly to the factory OBDII port, providing a secure gateway for downloading future calibrations and monitoring vehicle performance in real time.

Equipped with a high-resolution touchscreen and an intuitive graphical interface, the ProCal 4 allows users to perform essential maintenance and tuning tasks without the need for a separate laptop. It handles everything from speedometer corrections for gear and tire changes to advanced diagnostic procedures like crank relearns and fuel trim resets.

• High-resolution touchscreen with intuitive graphical interface
• Real-time engine data display and advanced data logging capabilities
• Reads and clears Diagnostic Trouble Codes (DTCs) with full on-screen descriptions
• Speedometer correction for gear and tire changes within factory parameters
• Cloud-updatable for the latest software and calibration releases
• Performs Key On/Engine Running (KOER) and Key On/Engine Off (KOEO) tests
• Ability to clear adaptive fuel trims and Keep Alive Memory (KAM)
• Supports profile and crank relearn procedures

Fits select 2011-2021 Ford F-150 and Mustang models (5.0L).

Engineered by Ford Performance for high-output applications, this cold spark plug set is designed to manage the increased cylinder temperatures associated with performance tuning. These plugs are a heat range colder than the factory original equipment, providing better heat dissipation and helping to prevent pre-ignition or detonation in demanding conditions.

This set is an essential upgrade for 5.0L Coyote engines running forced induction (superchargers or turbochargers), nitrous oxide, or aggressive aftermarket ECU calibrations. By pulling heat away from the combustion chamber more efficiently, these plugs ensure consistent ignition timing and reliable power delivery during high-load operation.

• Optimized for performance 5.0L Coyote engines
• One heat range colder than stock to prevent pre-ignition
• Ideal for forced induction and high-compression builds
• Direct-fit installation for 2011-2021 Mustang GT and 2011-2018 F-150 5.0L
• Manufacturer Part Number: M-12405-M50A
• Includes a complete set of 8 spark plugs

Fits select 2021-2025 Ford F-150 and Mustang models (5.0L).

Ensure reliable ignition in high-performance environments with this Ford Racing Cold Spark Plug Set. Engineered specifically for 5.0L Coyote engines equipped with variable displacement, these plugs feature a colder HR8 heat range. This makes them a critical upgrade for supercharged applications where managing combustion chamber temperatures is essential to preventing pre-ignition and detonation.

• Manufacturer Part Number: M-12405-50VDE
• Heat Range: Colder HR8 (Recommended for supercharger applications)
• Thread Diameter: 12mm
• Recommended Gap: 0.32 in. gap for supercharged setups
• Quantity: Set of 8

These plugs are designed to handle the increased cylinder pressures and heat associated with forced induction, providing a more robust spark path and improved thermal capacity compared to standard heat range plugs.

Fits select 2010-2019 Ford F-150, Flex, and Taurus models (2.3L / 2.7L / 3.5L).

This Ford Performance Cold Spark Plug Set is engineered for high-output EcoBoost engines that require improved thermal management. Running one heat range colder than the factory equipment helps prevent pre-ignition and detonation, making these plugs an essential upgrade for vehicles with increased boost levels or performance tuning.

• Manufacturer Part Number: M-12405-35T
• Heat Range: One range colder than stock OE plugs
• Quantity: Set of 6
• Pre-Gap: Factory gapped to .031 in. (0.79mm)
• Compatibility: Designed for Ford EcoBoost 2.3L, 2.7L, and 3.5L engines

Each plug is built to Ford Performance standards to ensure reliable ignition and consistent performance under the higher cylinder pressures common in modified turbocharged applications.

Fits select 1968-1995 Ford Mustang models.

Ensure your ignition timing remains locked in place with this Ford Racing distributor hold-down clamp. Designed as a direct replacement for the original hardware, this component provides the clamping force necessary to prevent distributor rotation under vibration or high-RPM operation. It is an ideal solution for both engine bay restoration and performance maintenance.

Manufactured from heavy-duty steel, this clamp features a triple chrome-plated finish for maximum corrosion resistance and a polished appearance that complements any dressed-up engine bay. This part is engineered to factory tolerances for a precise fit on small-block Ford applications found in classic and Fox-body Mustangs.

• Construction: Heavy-duty steel
• Finish: Triple chrome plated
• Function: Secures distributor housing to maintain timing accuracy
• Application: Fits select 1968-1995 Ford Mustang (Base, Boss, GT, LX, SVT Cobra)
• Manufacturer Part Number: M-12270-A302

Fits select 1968-1997 Ford, Mercury, and Lincoln vehicles including Mustang, F-150, F-250, E-Series, and Cougar.

Upgrade your ignition system with this Ford Racing 9mm Spark Plug Wire Set. Designed for high-performance applications, these wires feature a 9mm diameter with a spiral-wound suppression core that ensures low resistance and provides maximum voltage delivery to the plugs while minimizing spark loss. The wires are wrapped in a tough silicone insulation, engineered to withstand the extreme under-hood temperatures and resist damage from fuels, oils, and common automotive solvents. This heavy-duty construction helps prevent crossfire and voltage leaks, ensuring consistent combustion performance.

• 9mm spiral-wound suppression core for low resistance and high output
• Heat-resistant silicone insulation and boots protect against high temperatures and voltage loss
• Durable stainless steel distributor cap terminals for a secure, corrosion-resistant connection
• Numbered wires for each cylinder simplify installation and maintenance
• Includes coil wire for socket-type coils
• Features iconic 'Ford Racing' script in a vibrant red finish
• Manufacturer Part Number: M-12259-R301