Fits select 1968-1997 Ford, Lincoln, and Mercury vehicles (including Mustang GT, SVT Cobra, F-150, and Cougar). This high-performance wire set is designed for enthusiasts seeking maximum ignition efficiency and engine bay durability.

These Ford Racing 9mm spark plug wires feature a spiral-wound suppression core that provides low resistance for minimum spark loss while maintaining excellent EMI/RFI suppression. The thick silicone insulation and boots are engineered to withstand extreme engine temperatures and prevent voltage leaks, ensuring consistent performance even in high-heat environments. Each wire is highly resistant to common automotive chemicals, including fuels, oils, and solvents, and is numbered for specific cylinders to simplify installation. These wires are finished with the iconic 'Ford Racing' script.

• Construction: 9mm diameter with spiral-wound suppression core
• Insulation: High-temperature silicone for heat and voltage protection
• Terminals: Durable stainless steel distributor cap terminals
• Boot Style: 45-degree plug boots (most applications)
• Installation: Numbered wires for easy cylinder identification
• Included Hardware: Complete wire set including coil wire for socket-type coils
• MPN: M-12259-M301

Fits select 1968-1997 Ford and Mercury vehicles, including Mustang, F-150, F-250, F-350, and E-Series vans. Check the fitment table for specific engine and submodel compatibility.

These Ford Racing 9mm ignition wires are engineered for high-performance applications where heat management and spark delivery are critical. Featuring a spiral-wound suppression core, these wires provide low electrical resistance to minimize spark loss while suppressing RFI. The wires are wrapped in a heavy-duty silicone jacket and include matching boots to withstand extreme under-hood temperatures and resist breakdown from exposure to fuels, oils, and solvents.

• 9mm wire diameter with "Ford Racing" script and numbered cylinder identifiers
• Spiral-wound suppression core for maximum voltage delivery and low resistance
• High-temperature silicone insulation and boots prevent voltage leakage and crossfire
• 45-degree spark plug boots for improved clearance in most applications
• Stainless steel distributor cap terminals for corrosion resistance and secure connection
• Includes coil wire for socket-type coils where applicable
• Manufacturer Part Number: M-12259-C301

Fits 2005-2014 Ford Mustang GT and Shelby models.

Restore the integrity and performance of your rear-end assembly with this Ford Racing Axle Bearing and Seal Kit. Engineered to maintain strict tolerances, these high-quality steel bearings and seals are specifically designed for 8.8-inch outer axle shafts. This kit replaces worn factory components to ensure smooth axle rotation and prevent gear oil leaks, providing the durability needed for high-performance street or track use.

• Proudly made in the USA
• Engineered for Ford 8.8-inch outer axle shafts
• Bearing OD: 2.5309/2.5315 in.
• Bearing ID: 1.6189/1.6194 in.
• Complete kit includes 2 outer axle shaft bearings and 2 seals
• Manufacturer Part Number: M-1225-B1

Fits 1986-2004 Ford Mustang Base, GT, LX, and GTS models equipped with the 8.8-inch rear axle.

Rebuild your rear end with the reliability of Ford Racing. This outer axle bearing and seal kit is manufactured to strict tolerances from high-quality steel, providing a direct-fit replacement for worn factory components. Whether you are performing a gear swap or addressing a leaking seal, these components ensure smooth axle rotation and proper fluid retention by maintaining a precise 2.256-inch outer diameter fit.

• Manufacturer Part Number: M-1225-B
• Fits 8.8-inch outer axle shafts
• Bearing Outer Diameter: 2.256 inches
• Constructed from high-grade steel for long-term durability
• Complete kit includes two (2) outer axle shaft bearings and two (2) axle seals

Fits select 2020-2022 Ford F-250, F-350, and E-350 Super Duty models (7.3L gas engines).

Maintain the reliable ignition performance of your 7.3L gas engine with this complete set of ignition coils and spark plug wires from Ford Performance. This kit replaces worn or failing components with original equipment-spec hardware designed to ensure consistent spark and peak combustion efficiency. Each kit is a comprehensive solution for refreshing the ignition system on all eight cylinders.

• Complete set of 8 ignition coils and 8 ignition wires
• Includes all necessary mounting hardware for installation
• Direct replacement for factory components on 7.3L gas engines
• Manufacturer Part Number: M-12029-SD73

Fits select 2012-2020 Ford F-150 and 2016-2017 Mustang GT (5.0L / 5.2L).

Improve your engine's combustion efficiency and ignition reliability with the Ford Racing Hi-Energy Ignition Coil set. Originally featured as the production coil on the 2020 Shelby GT500, these high-output coils are designed to provide a more powerful spark than standard equipment. By delivering more energy to the spark plugs, they help ensure complete fuel burn even under the high cylinder pressures found in performance applications.

• Direct-fit replacement for factory ignition coils
• 60% increase in energy output compared to stock coils (50mJ vs. 33mJ)
• Standard production equipment on the 2020 Mustang GT500
• Optimized for performance in 5.0L Coyote and 5.2L engines
• Complete set of 8 coils
• Manufacturer Part Number: M-12029-M52

Fits 2003-2014 Ford Mustang and 2005-2006 Ford GT (5.4L).

Restore reliable ignition performance to your modular 4-valve engine with the Ford Racing SVT 4V Ignition Coil Set. These high-voltage coils are engineered as direct replacements for original equipment, ensuring precise fitment and accurate spark delivery. Whether you are performing routine maintenance on a Shelby GT500 or completing a custom 4V DOHC build, these SVT-spec coils provide the voltage consistency required for high-performance applications.

• Direct replacement for factory ignition coils
• SVT High Voltage output for consistent ignition
• Compatible with 4-valve DOHC 5.4L engines
• Manufacturer Part Number: M-12029-4V

Vehicle Fitment:

Fits 2005-2010 Ford Mustang Bullitt, GT, and Shelby GT (4.6L / 5.4L).

This Ford Racing ignition coil set provides a direct, high-quality replacement for 4.6L and 5.4L 3-valve (3V) engines originally equipped with 8L3E-style coils. These coils are specifically engineered for Mustang 3V engines utilizing 12mm spark plugs. They are a required component when installing specific Ford Racing cylinder heads on Mustang GT models that were originally manufactured with "high thread" spark plug designs. Designed by the original manufacturer, this set ensures accurate ignition performance and factory-spec fitment.

• Manufacturer Part Number: M-12029-3V
• Complete engine set of ignition coils
• Compatible with 12mm spark plug applications
• Replaces factory 8L3E coils
• Direct bolt-in installation
• Made in the USA

Fits select 2019-2024 Ford Bronco and Ranger (XL / XLT / Lariat / Raptor / Badlands). This comprehensive Tire Pressure Monitoring System (TPMS) kit is designed for Ford truck and SUV owners upgrading to aftermarket wheels or replacing a full set of factory sensors, including the spare tire.

Maintaining a functional TPMS is critical for both safety and fuel efficiency. This Ford Racing kit provides five valve-mounted sensors and the necessary activation tool to ensure your vehicle correctly monitors all four rolling tires plus a full-size mounted spare. The included sensors feature durable rubber valve stems engineered to withstand the rigors of both daily driving and off-road use.

• Complete 5-wheel kit (includes spare tire coverage)
• Includes handheld TPMS activation/programming tool
• Equipped with high-quality rubber valve stems
• Direct replacement for factory TPMS frequencies
• Manufacturer Part Number: M-1180-BR5

What's Included: (5) Valve-Mounted TPMS Sensors, (5) Rubber Valve Stems, and (1) Activation Tool.

Fits select 2015-2024 Ford Bronco Sport, F-150, and Mustang models.

Ensure your vehicle's tire pressure monitoring system (TPMS) remains accurate and functional with the Ford Racing TPMS Sensors and Activation Tool Kit. This comprehensive kit is an essential solution when installing a new wheel and tire package or replacing failed sensors, allowing you to maintain factory safety monitoring systems without trips to the dealer for programming.

This kit features four valve-mounted snap-in sensors designed for a precise fit within the wheel barrel. Also included is the specialized TPMS activation tool, which is required to train the sensors to your vehicle's ECU. The process is straightforward, ensuring your dashboard remains free of warning lights and your tire pressures stay monitored for optimal performance and fuel efficiency.

• Manufacturer Part Number: M-1180-B
• Sensor Type: Valve-mounted snap-in
• Kit Includes: (4) TPMS Sensors, (1) Activation Tool
• Application: Direct replacement for OE tire pressure sensors

Fits 2024-2025 Ford Mustang models including EcoBoost, GT, Dark Horse, and GTD.

Maintain accurate tire pressure monitoring when upgrading your wheels with this genuine Ford Racing TPMS Sensor and Activation Tool Kit. Designed specifically for the S650 platform, this kit ensures your vehicle's safety systems remain functional without dashboard error lights after a wheel swap or seasonal tire change.

This comprehensive kit includes four individual 433MHz sensors and a handheld activation tool, allowing you to train the sensors to your Mustang's ECU at home without a trip to the dealership. These are factory-style components designed for a seamless fit in any Mustang wheel compatible with snap-in TPMS sensors.

• Complete kit: includes four (4) sensors and one (1) activation tool
• Operates on 433MHz frequency for 2024+ compatibility
• Essential for new wheel and tire installations
• Handheld tool simplifies the sensor training process
• Manufacturer Part Number: M-1180-433MHZ2

Fits 2015-2023 Ford Mustang (V6, EcoBoost, GT, and Shelby GT350/GT350R).

The Ford Racing Rear Wheel Hub Kit (M-1104-B) is a performance-oriented replacement for the factory rear hub assembly on S550 and S650 platform Mustangs. This kit comes pre-assembled with upgraded ARP wheel studs, offering significantly higher tensile strength and fatigue resistance than standard OE studs. This makes it a critical upgrade for vehicles subjected to the high lateral loads and thermal stresses of road racing, autocross, or drag racing.

Built in the USA to demanding tolerances, these hubs ensure proper wheel bearing alignment and long-term durability. The pre-installed ARP hardware provides the necessary thread strength for frequent wheel changes and the use of high-traction tire compounds.

• Manufacturer Part Number: M-1104-B
• Equipped with high-strength ARP wheel studs
• Direct-fit replacement for the factory rear wheel hub
• Designed for high-performance street and track applications
• Made in the USA

Fits select 2005-2014 Ford Mustang models including Base, GT, Boss 302, and Shelby GT500. This front hub kit from Ford Performance is a service replacement part for the Boss 302S race car, engineered for the high-stress demands of competitive road racing and track use.

This kit replaces the factory hub and comes pre-equipped with upgraded, long-reach ARP wheel studs. These high-strength press-in studs provide the necessary length and durability for use with thicker wheel spacers or aftermarket racing wheels. Each unit is manufactured to precise tolerances to ensure proper bearing preload and long-term reliability under heavy cornering loads.

• Manufacturer Part Number: M-1104-A
• Stud Style: Press-in ARP wheel studs
• Thread Size: 1/2-20 RH
• Stud Length: 3.0 in. (3.315 in. under head length)
• Knurl Diameter: 0.549 in.
• Origin: Made in the USA

Fits select 2020-2022 Ford F-250, F-350, and E-350 Super Duty models (7.3L).

Maintain the cranking performance of your 7.3L gas engine with the Ford Racing M-11000-SD73 starter. Engineered as a direct-fit replacement, this heavy-duty starter ensures reliable ignition for the Ford Godzilla engine platform. It is designed to meet or exceed original equipment standards, providing the consistent torque required to turn over high-displacement Super Duty engines in all conditions.

• Manufacturer Part Number: M-11000-SD73
• Engine Compatibility: 7.3L Gas
• Service Type: OE Replacement
• Build Quality: Heavy-duty housing and internal components for longevity

Fits select 2018-2019 Ford F-150 and Mustang (5.0L) models equipped with the 10R80 automatic transmission.

The Ford Racing High Torque Mini Starter (M-11000-C50A) is engineered to provide reliable starting power in a significantly smaller and lighter package than factory units. Weighing only approximately 6 lbs, this starter features a compact construction that is specifically designed to create additional clearance for long-tube headers and other aftermarket exhaust configurations. It serves as a high-performance replacement for 5.0L Coyote applications, ensuring consistent engagement and cranking speed.

• High torque motor design for reliable starting
• Compact construction provides increased header and exhaust clearance
• Lightweight design at approximately 6 lbs
• Compatible with 5.0L engines and 10R80 transmissions
• Includes required starter cables for installation
• Manufacturer Part Number: M-11000-C50A

Fits select 2015-2017 Ford Mustang models, including EcoBoost, GT, and Shelby GT350/R.

Give your S550 interior a performance-inspired look with the Ford Racing Red Starter Button Installation Kit. This genuine OE upgrade replaces the standard factory silver button with a vibrant red finish, providing a high-contrast focal point in the cockpit. Engineered by Ford Racing, this kit ensures a seamless fit within the dash trim and maintains identical tactile feedback and electronic performance as the original equipment.

• Manufacturer Part Number: M-10B776-MR
• Color: Performance Red
• Fitment Type: OE Replacement / Upgrade
• Vehicle Platform: 2015-2017 Ford Mustang (All Trims)

As a direct-fit component, this kit is designed for straightforward installation using factory mounting points and electrical connections, ensuring your ignition system remains reliable while enhancing the aesthetic of your Mustang's interior.

Fits select 2000-2025 Ford F-150, F-250/F-350 Super Duty, Expedition, Explorer, Ranger, and other SUV/Truck models.

Restore or customize your Ford wheels with this genuine Ford Racing center cap kit. Designed as a direct replacement for lost or damaged caps, these units are identical to those found on several current production truck and SUV models. Each cap features a durable gloss black background that provides a high-contrast base for the embossed chrome Ford logo, ensuring a clean, factory-correct appearance that holds up to road debris and environmental wear.

Sold as a complete set of four, these center caps are built to exact OE specifications for a secure snap-in fit. Whether you are refurbishing original wheels or matching a new finish, these caps provide the final professional touch to your vehicle's exterior.

• Manufacturer Part Number: M-1096K-BCT
• Finish: Gloss Black with Chrome Logo
• Kit Includes: (4) Wheel Center Caps
• Fitment: Standard Ford truck/SUV wheel hub bores (see fitment table for specific model compatibility)

Fits select 2000-2023 Ford passenger cars including Mustang, Focus, Fusion, Fiesta, Taurus, Crown Victoria, and Thunderbird models.

Refresh your vehicle's appearance with this genuine Ford Racing wheel center cap kit. These caps feature the iconic Ford oval in a brilliant chrome finish set against a deep gloss black background, providing a premium look that matches factory aesthetics. Used on several production Ford models, these caps serve as a high-quality replacement for worn, missing, or damaged OE center caps.

• Complete set of four (4) wheel center caps
• Distinctive chrome Ford logo on a gloss black background
• Engineered for a secure fit on standard Ford passenger car wheels
• Durable materials resistant to weather and road debris
• Manufacturer Part Number: M-1096K-BCC

Fits select 2015-2025 Ford Mustang EcoBoost, GT, Shelby GT350/GT500, Mach 1, Bullitt, and Dark Horse models.

Complete the look of your performance wheels with this genuine Ford Racing wheel center cap. Specifically designed for Ford Racing wheel sets, this cap provides a clean, factory-quality finish. It features the iconic chrome running horse emblem set against a sleek black background for a classic, high-contrast appearance that complements any wheel finish.

• Fits 19-inch wheels
• Design: Chrome Running Horse on a black background
• Manufacturer Part Number: M-1096-O
• Made in the USA

Precision-manufactured to ensure a secure fit and durable finish that resists the elements. Whether you are replacing a lost cap or upgrading your wheel set, this component delivers the exact fitment and styling expected from Ford Racing performance parts.

Fits select 2021-2024 Ford Bronco models including Badlands, Wildtrak, Raptor, Everglades, and vehicles equipped with the Sasquatch Package.

This Ford Racing Functional Bead Lock Ring Kit allows you to convert your factory bead lock capable wheels for true off-road performance. Designed to replace the decorative trim rings, these functional rings securely clamp the tire bead to the wheel, allowing you to run significantly lower tire pressures for maximum traction in technical terrain. This kit is specifically engineered for the Sasquatch Package (Option 675) and the optional bead lock capable wheel (Option 64W) found on Badlands trims.

• Manufacturer Part Number: M-1021K-BL5
• Includes (5) functional bead lock rings
• Includes a complete set of fasteners for all five rings
• Specifically fits 2021-2024 Ford Bronco factory bead lock capable wheels
• Designed for off-road use only
• Installation instructions included

Fits select 2017-2025 Ford F-150 and 2024-2025 Ranger Raptor models equipped with bead-lock capable wheels.

This Ford Racing Functional Bead Lock Ring Kit (Style 1) allows you to convert your factory bead-lock capable wheels into a true bead-lock setup. By mechanically clamping the tire bead to the wheel, this kit ensures your tires stay securely seated even when running low air pressures for maximum traction in technical off-road terrain. Each ring is engineered to precise tolerances for a perfect fit and dependable performance during aggressive trail use.

Please note: The functional bead-lock configuration is intended for off-road use only and is not cleared for street use. This kit includes all necessary hardware to complete a set of four wheels.

• Manufacturer Part Number: M-1021K-BL1
• Kit includes four (4) functional bead lock rings
• Includes 24 fasteners per ring (96 total)
• Style 1 design configuration
• Designed for off-road use only
• Compatible with factory bead-lock capable wheels

Fits select 2017-2025 Ford F-150, 2021-2024 Bronco, and 2024-2025 Ranger models equipped with factory beadlock-capable wheels.

The Ford Racing Bead Lock Ring Kit (M-1021-F15RB) is engineered to convert your factory beadlock-capable wheels into a true functional beadlock setup. This kit allows off-road enthusiasts to securely clamp the tire bead to the wheel, preventing the tire from de-seating when running the low air pressures required for technical rock crawling and high-speed desert driving. Each ring is crafted from forged aluminum to withstand the impacts and stresses of rigorous trail use.

• Material: High-strength forged aluminum construction.
• Hardware Included: Set of 24 fasteners for complete installation.
• Functional Design: Replaces the decorative trim ring with a functional locking mechanism.
• Manufacturer Part Number: M-1021-F15RB
• Note: This bead lock configuration is intended for off-road use only and is not for use on public highways.