Fits 2015-2020 Ford Mustang EcoBoost, GT, V6, and Shelby GT350/R models.

Upgrade your Mustang's front suspension geometry and steering response with the Ford Racing Performance Pack Front Control Arm Kit. Designed as a direct-fit upgrade, these arms replace factory components with forged steel assemblies that utilize low-friction ball joints and improved inner bushings. The high-quality nylon bearings significantly reduce impact harshness and internal friction, resulting in a more controlled ride and better articulation under load.

This kit is specifically recommended when installing heavy-duty or track-oriented suspension components. For improved thermal management during high-performance driving, the arms feature integrated air deflectors to channel cooling air directly to the braking system. The assembly also incorporates a spherical bearing mount for increased precision over standard rubber bushings.

• Forged steel construction for superior strength and durability
• Low-friction ball joints for improved steering feel
• High-quality nylon bearings to reduce impact harshness
• Integrated air deflectors for enhanced brake cooling
• Spherical bearing mounts for consistent suspension geometry
• Includes left and right lower control arm assemblies and cotter pins
• Manufacturer Part Number: M-3075-F
• Made in the USA

Fits select 2005-2010 Ford Mustang GT, Bullitt, and Shelby GT models.

Designed to enhance steering response and handling, this Ford Racing Front Lower Control Arm Upgrade Kit (M-3075-E) is an essential upgrade for owners looking to refresh their S197 suspension. These assemblies replace factory components with upgraded units featuring low-friction ball joints and improved inner bushings. A high-quality nylon bearing is utilized to significantly reduce impact harshness, providing a more controlled and refined ride quality over various road surfaces.

This kit is highly recommended for vehicles equipped with heavy-duty suspension components where increased load demands require superior articulation and strength. The included ball joints are engineered for increased durability compared to standard OE units, ensuring consistent performance under spirited driving conditions.

• Low-friction ball joints for improved steering precision
• High-quality nylon bearings to reduce impact harshness
• Increased strength ball joint housings
• Improved inner bushings for better handling stability
• Direct fit for 2005-2010 Ford Mustang GT, Bullitt, and Shelby GT
• Manufacturer Part Number: M-3075-E

Includes: Left and right lower control arm assemblies, cotter pins, and installation instructions.

Fits 2021-2024 Ford F-150 4WD SuperCab and SuperCrew models equipped with the PowerBoost hybrid engine.

This Ford Racing Full Lowering Kit is specifically engineered for the unique weight distribution and dynamics of the 4WD PowerBoost hybrid drivetrain. By reducing the vehicle's ride height, this kit lowers the center of gravity to improve stability, reduce body roll, and enhance cornering performance. The result is a more aggressive, level stance that maintains the ride quality expected from a late-model F-150.

• Tuned specifically for 4WD PowerBoost hybrid configurations
• Compatible with both SuperCab and SuperCrew body styles
• Improves handling characteristics and steering response
• Retains daily-driving comfort and towing capability
• High-quality components designed for long-term durability
• Manufacturer Part Number: M-3000-P4

Fits 2021-2024 Ford F-150 (including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, STX, SSV, and Police Responder).

Level the stance of your 14th-generation F-150 with the Ford Performance M-3000-HB Rear Lowering Kit. This kit is engineered to provide a clean, level appearance by dropping the rear of your 2WD or 4WD pickup approximately 1.5 inches. Constructed from heavy-duty laser-cut steel, these shackles replace the factory components to reduce the wheel well gap while maintaining ride quality.

For long-term durability and quiet operation, the kit includes high-durometer urethane bushings. Ford has integrated grease fittings into the lower shackle tubes and improved the internal bushing grease grooves to simplify maintenance and prevent suspension noise. The DOM center tubes are manufactured to tight tolerances for a precise, bolt-on fit using the included installation hardware.

• Reduces rear ride height approximately 1.5 inches
• Laser-cut steel lowering shackles with durable urethane bushings
• Integrated grease fittings for easy maintenance
• Improved DOM center tube tolerances for precise fitment
• Enhanced bushing grease groove design for quiet operation
• Includes all necessary installation hardware
• Manufacturer Part Number: M-3000-HB

Fits 2015-2020 Ford F-150 4WD Regular Cab, SuperCab, and SuperCrew models.

Level out your truck's stance with the Ford Performance Rear Lowering Kit. This kit reduces rear ride height by approximately 1.5 inches, effectively correcting the factory rake for a balanced, sport-truck appearance. Unlike generic lowering components, these shackles are engineered to maintain OE ride quality while providing a more aggressive profile.

• Provides approximately 1.5 inches of rear drop for a leveled appearance
• Constructed from high-strength, laser-cut steel for maximum durability
• Equipped with premium urethane bushings to ensure quiet operation and longevity
• Direct-fit replacement for factory rear shackles
• Designed specifically for 4WD drivetrain configurations
• Made in the USA
• Manufacturer Part Number: M-3000-HA

Fits 2015-2020 Ford F-150 trucks including King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, XL, and XLT models.

Achieve a level, aggressive sport truck stance with the Ford Racing M-3000-H4A lowering kit. This complete suspension system is designed to reduce the front ride height by approximately 1.5 inches and the rear by approximately 2.5 inches, effectively leveling the truck while improving its center of gravity. Whether you are looking to improve handling or simply fill the wheel well gap, this kit provides a precision-engineered solution that maintains ride quality.

The kit features precision-tuned front coil springs and heavy-duty rear lowering shackles. These shackles are laser-cut from high-strength steel and utilize durable urethane bushings to prevent binding and noise. Also included are laser-cut strut spacers, allowing for front height adjustability to fine-tune your F-150's specific stance.

• Manufacturer Part Number: M-3000-H4A
• Front Drop: Approximately 1.5 in.
• Rear Drop: Approximately 2.5 in.
• Kit Includes: Front coil springs, laser-cut steel shackles, urethane bushings, and front strut spacers
• Build: Laser-cut steel components with precision-tuned spring rates
• Origin: Made in the USA

This genuine Ford Racing FP350S ABS Module with Bracket (M-2353-D) is a specialized service component engineered specifically for the FP350S factory road race car. Designed to handle the high-intensity braking demands of competitive track use, this module provides the specific calibration required for optimized deceleration and wheel-speed management in a racing environment.

This assembly includes the necessary mounting bracket to ensure a secure, vibration-resistant installation within the vehicle's chassis. As an authentic service part, it restores the precise ABS functionality and feedback characteristics required by the FP350S platform.

• Manufacturer Part Number: M-2353-D
• Model Application: Designed exclusively for Ford FP350S track vehicles
• Inclusions: ABS control module and integrated mounting bracket
• Classification: For off-road and competition use only; not intended for street use
• Service Use: Direct replacement for original FP350S equipment

The Ford Racing BOSS 302R/S ABS Module is a precision-calibrated electronic control unit designed specifically for the rigors of competitive track use. Engineered for the factory-built BOSS 302R and 302S race cars, this module features a unique software calibration optimized for high-performance braking systems and racing slick tires.

• Specifically tuned for racing and track-day environments
• Developed for Ford Mustang BOSS 302R and 302S factory competition models
• Optimized brake pressure modulation for increased grip levels
• Manufacturer Part Number: M-2353-CA

Notice: This component is intended for Off-Road Use Only. It is not designed for, nor should it be used in, street-driven vehicles on public roads.

Fits select 2011-2021 Ford Mustang models including Base, EcoBoost, GT, V6, Boss 302, Bullitt, Mach 1, and Shelby GT350/GT500 with manual transmissions.

Upgrade your S197 or S550 interior with the same premium aesthetic found on higher trim levels. This Ford Racing kit provides a direct replacement for factory pedals on Premium Package models or a complete performance upgrade for base-level Mustangs. Unlike generic covers, this kit includes a full replacement accelerator pedal assembly to ensure precise throttle response and factory-grade fitment.

The pedals feature a brushed aluminum finish with integrated urethane grip surfaces to prevent foot slip during spirited driving. Installation is straightforward and requires no drilling, utilizing factory mounting points and slip-on designs for the brake and clutch pads.

• Direct replacement for Ford Premium Package pedal assemblies
• High-grip aluminum and urethane construction
• Includes complete accelerator pedal assembly
• Includes clutch and brake pedal pads
• No drilling required for installation
• Manufacturer Part Number: M-2301-BM

Fits 1994-2004 Ford Mustang models, including Base, GT, Bullitt, GTS, Mach 1, and SVT Cobra.

Upgrade your SN95 or New Edge interior with these Ford Racing Special Edition pedal covers. Engineered as a direct replacement for factory covers, these units feature a premium brushed aluminum finish designed to withstand the rigors of performance driving. To ensure maximum control, integrated urethane knobs provide enhanced tactile feedback and superior grip underfoot.

Installation is straightforward and requires no drilling, allowing you to refresh your pedal assembly using basic tools. These covers offer a precise fit over the factory pedals, combining custom muscle car styling with the durability expected from Ford Racing components.

• Brushed aluminum construction for durability and aesthetics
• Integrated urethane knobs for improved pedal grip
• Direct replacement for original equipment (OE) pedal covers
• Simple, no-drill installation process
• Manufactured in the USA
• Manufacturer Part Number: M-2301-B

Fits select 2013-2018 Ford Focus models (S, SE, SEL, ST, Titanium, and RS).

Give your Ford Focus the stopping power and heat management of the flagship RS model. This Ford Performance Performance Front RS Brake Upgrade Kit (M-2300-W) is designed to replace the smaller factory front brakes on Focus ST and standard Focus models with the heavy-duty components found on the Focus RS. The kit provides a significant increase in thermal capacity and clamping force, ideal for spirited driving or track-day use.

This comprehensive kit features high-performance 4-piston Brembo aluminum calipers finished in signature RS Blue, providing both a visual upgrade and superior pedal feel. These calipers are paired with large 13.7-inch vented RS-spec rotors to ensure consistent braking performance under demanding conditions.

• Brembo four-piston aluminum calipers finished in RS Blue
• 13.7-inch (348mm) vented RS brake rotors
• Direct upgrade for 2013-2018 Ford Focus chassis
• Manufacturer Part Number: M-2300-W

Fits 2015-2023 Ford Mustang (EcoBoost, GT, V6, and Shelby GT350/R).

Upgrade your S550’s stopping power with the Ford Performance 6-Piston Front Brake Upgrade Kit. This system is the original equipment found on the 2015-2016 Mustang GT Performance Package, engineered to provide increased thermal capacity and reduced brake fade during high-performance driving. By utilizing massive 6-piston Brembo calipers and 15-inch vented rotors, this kit delivers the clamping force and heat dissipation required for the track and spirited street use.

• Genuine Ford Performance part number M-2300-V
• High-performance 6-piston Brembo aluminum front calipers finished in black
• 15-inch (380mm) vented front rotors for maximum cooling
• Includes OE-spec brake pads and front splash shields
• Complete with all necessary installation hardware for a direct bolt-on upgrade
• Original equipment on 2015-2016 Mustang GT Performance Package

Fits select 2005-2014 Ford Mustang GT, Boss 302, Bullitt, and Shelby GT/GT500 models.

Improve your vehicle's deceleration and thermal capacity with the Ford Racing M-2300-S SVT Brake Upgrade Kit. This comprehensive system is engineered to replace the factory front braking components with high-performance 14-inch vented rotors and 4-piston Brembo calipers, providing more consistent pedal feel and significantly reduced stopping distances under heavy use.

• Two 14-inch diameter vented rotors for superior heat dissipation
• Two black anodized aluminum 4-piston Brembo front brake calipers
• Front and rear brake pads, including specialized SVT rear pads
• Set of four DOT-approved stainless steel braided brake lines for firmer pedal response
• Front disc brake backing plates included
• Direct-fit installation to factory mounting points

Fits select 2015-2025 Ford Mustang GT, EcoBoost, GTD, and Dark Horse models (2.3L).

Stiffen your chassis and sharpen your steering response with the Ford Racing Strut Tower Brace. This high-quality steel brace is engineered to reduce front-end flex, providing increased rigidity and a more communicative feel during cornering and spirited driving. Designed for a precise fit, it clears all production components and many aftermarket modifications while adding a performance-oriented look under the hood.

• Increases front-end structural rigidity for improved handling and steering precision
• Parallel-bar design engineered from high-strength steel
• Durable silver powdercoat finish over a corrosion-resistant E-coat
• Clears factory engine components and many aftermarket intakes
• Includes all necessary mounting hardware and detailed installation instructions
• Manufacturer Part Number: M-20201-MA

Fits 2015-2024 Ford Mustang models, including EcoBoost, GT, Bullitt, Mach 1, and Shelby GT350/GT350R/GT500.

Improve your vehicle's handling and steering response by increasing front-end chassis rigidity with the Ford Racing GT350R Strut Tower Brace Kit. This brace is engineered to reduce cowl shake and suspension flex during spirited driving or track use, resulting in a more connected and positive steering feel. The low-profile design is specifically clearanced to fit over production engine covers and various aftermarket components.

• Increases front-end rigidity and improves cornering precision
• Fabricated from high-strength steel for maximum durability
• Protective black E-coat finish provides superior corrosion resistance
• Designed to clear factory and many aftermarket engine components
• Complete kit includes all required mounting hardware and installation instructions
• Manufacturer Part Number: M-20201-GT350

Fits 2015-2023 Ford Mustang EcoBoost, GT, Mach 1, and Shelby GT500 models.

Protect your vehicle's exterior with the Ford Performance Gray Car Cover. Engineered using the Nextec encapsulation process, this cover provides a high-performance barrier against dust and environmental contaminants while maintaining a compact profile for easy storage. The material is specifically designed for a precise fit on the S550 chassis, ensuring full coverage from the front grille to the rear bumper.

• Nextec Technology: Encapsulation process offers excellent weather protection and allows the cover to be folded into a compact size.
• Official Branding: Features a silk-screened Ford Performance logo on the windshield banner area, a Pony logo on the grille, and a Mustang logo on the rear.
• Convenient Storage: Includes a matching storage bag to keep the cover clean when not in use.
• Quality Construction: Designed for durability and paint-safe protection.
• Manufacturer Part Number: M-19412-M8FP

Fits 1996-2010 Ford Mustang GT, Bullitt, Mach 1, Shelby GT, and SVT Cobra models (4.6L).

This Ford Performance A/C Eliminator Kit (MPN: M-19216-D46) is engineered for 1996-2010 Mustang owners looking to shed front-end weight and improve rear weight transfer at the track. By removing the heavy, parasitic drag of the factory A/C compressor, you optimize weight distribution for more consistent launches and reduced ETs. This kit is designed for a precise fit on both 2V SOHC and 4V DOHC 4.6L Modular engines.

The assembly features a lightweight yet durable cast aluminum idler pulley bracket that bolts directly into the factory compressor mounting position. This design allows you to retain your original accessory belt length, simplifying the conversion process for dedicated race or street-strip applications.

• Removes front-end weight for improved weight distribution and traction
• High-strength cast aluminum idler pulley bracket replaces the A/C compressor
• Retains use of the stock-length accessory drive belt
• Direct bolt-on installation with included hardware
• Made in the USA
• Manufacturer Part Number: M-19216-D46

Fits 2015-2025 Ford F-150 (XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, SSV, and STX models).

Enhance the front-end aesthetics and recovery utility of your truck with this pair of Ford Performance red tow hooks. These hooks provide a bold, race-inspired appearance while serving as functional recovery points for off-road or emergency use. Manufactured from high-strength steel, they are finished in a durable powder coat to resist chipping and corrosion in harsh environments.

• High-strength steel construction for reliable durability
• Vibrant Ford Performance red powder-coated finish
• Direct bolt-on replacement for factory front tow hooks
• Sold as a complete pair (left and right)
• Manufacturer Part Number: M-18954-F15R

Fits 2021-2025 Ford Bronco models equipped with the factory Modular Front Bumper.

Add a functional recovery point and a distinct visual accent to your Ford Bronco with this pair of Ford Racing front bumper tow hooks. Specifically engineered for vehicles equipped with the factory Modular Front Bumper, these hooks provide a durable and reliable solution for off-road recovery while enhancing the vehicle's front-end styling.

• Fits 2021-2025 Ford Bronco (All submodels with Modular Bumper)
• High-visibility orange powder-coated finish for superior corrosion resistance and durability
• Direct-fit installation to factory mounting points
• Sold as a complete pair (left and right)
• Manufacturer Part Number: M-18954-BO

Fits 2021-2025 Ford Bronco models (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, Stroppe, and Wildtrak).

Add a functional accent to your Ford Bronco's modular front bumper with this set of genuine Ford Performance tow hooks. These hooks are engineered as direct replacements for the factory equipment, providing a reliable recovery point while enhancing the front-end aesthetics. Each hook features a durable, high-visibility blue powder-coated finish designed to withstand the rigors of off-road use and resist corrosion from exposure to the elements.

• Fits 2021-2025 Ford Bronco with modular front bumper
• Durable blue powder-coated finish for corrosion resistance
• Direct-fit installation to factory mounting points
• Sold as a pair (set of 2)
• Manufacturer Part Number: M-18954-BB

Protect your vehicle's hitch receiver from road debris, mud, and moisture with the Ford Performance 2-inch Hitch Receiver Cover. Designed for any standard 2-inch receiver, this heavy-duty rubber cover features integrated drainage channels that allow water to escape, preventing internal corrosion and rust buildup within the hitch tube.

This functional accessory includes a built-in four-pin wiring harness plug holder to keep your electrical connector secure and protected from impact or environmental damage when not in use. The integrated retention loop ensures the cover remains attached to the receiver tube when a ball mount is installed, preventing loss during towing. Featuring the iconic Ford Oval and Ford Performance branding, it is a practical upgrade for any Ford truck or SUV.

• Fits standard 2-inch hitch receivers
• Constructed from high-quality, weather-resistant rubber
• Embossed with Ford Oval and Ford Performance logos
• Integrated 4-pin wiring plug holder and retention loop
• Internal drainage design prevents water accumulation
• Manufacturer Part Number: M-1840-FP

This Ford Performance by WARN Epic Series D-Ring Shackle provides a heavy-duty, reliable recovery point for demanding off-road applications. Engineered from high-strength forged steel, this clevis shackle is designed to facilitate secure winching and vehicle recovery without compromising structural integrity under tension.

To ensure long-term durability in harsh environments, the shackle features a specialized E-coat finish that provides maximum protection against wear, impact, and abrasion. The threaded pin design allows for straightforward installation and removal, making it easy to connect recovery straps or winch cables in the field. This essential piece of recovery gear is built to the rigorous standards expected of the Ford Performance and WARN partnership.

• Forged steel construction for superior strength and durability
• Rated for a maximum load capacity of 18,000 lbs.
• Premium E-coat finish resists corrosion, wear, and trail impact
• Threaded pin allows for quick and secure removal
• Part Number: M-1830-EDS

Showcase your brand loyalty with this genuine Ford Performance License Plate Frame. Engineered for durability and a premium aesthetic, this frame is constructed from high-quality brushed stainless steel to resist rust and corrosion in harsh driving environments. It provides a clean, professional finish that complements any Ford vehicle, from street performance builds to daily drivers.

This frame is designed to fit standard license plate mounts without obstructing state registration stickers. As a genuine Ford Performance part, it meets the high standards of enthusiasts who demand quality materials and precise fitment.

• Material: High-grade brushed stainless steel construction
• Finish: Corrosion-resistant brushed satin
• Compatibility: Fits standard 12-inch x 6-inch US and Canada license plates
• Branding: Features the laser-etched Ford Performance logo
• Manufacturer Part Number: M-1828-SS304C

Add a clean, race-inspired aesthetic to your vehicle with the Ford Performance Ford Racing license plate. This single license plate is designed for universal fitment across Ford cars, trucks, and SUVs, providing a professional finishing touch that highlights the brand's performance heritage.

Constructed from lightweight and durable aluminum, this plate features a brilliant white anodized finish for superior corrosion resistance and longevity. The face is adorned with the iconic blue Ford oval positioned above the classic red "Racing" script, creating a distinctive look that won't fade or peel like standard printed frames.

• Material: High-grade aluminum
• Finish: White anodized coating
• Graphics: Blue Ford Oval and Red Racing script logo
• Quantity: Single plate
• Part Number: M-1828-FPONE

Safeguard your vehicle's exterior finish during engine bay maintenance with the Ford Performance Fender Cover. Designed for professional-grade protection, this cover prevents scratches, dents, and damage from exposure to motor oil, grease, and corrosive chemicals.

Constructed from a heavy-duty, slip-resistant material, this cover stays securely in place while you work over the engine bay. It features a specialized ridged area designed to hold small tools, fasteners, and parts, preventing them from rolling off the fender or scratching the paint. The acid-resistant and grease-resistant surface ensures durability even in demanding shop environments.

• Protects bodywork from scratches, chemicals, and oils
• Integrated ridged tray for small tools and hardware management
• Strong, slip-resistant construction for secure positioning
• Acid and grease-resistant material
• Dimensions: 27 in. x 36 in.
• Features Ford Racing logo
• Made in the USA
• Manufacturer Part Number: M-1822-A7

Fits 2023-2024 Ford F-250 and F-350 Super Duty models (XL, XLT, Lariat, King Ranch, Platinum, and Limited).

The Ford Performance Parts by WARN Super Duty Winch Kit was co-developed by Ford and WARN engineers to provide a recovery solution that offers an OEM level of fit, finish, and vehicle integration. Designed specifically for 2023-2024 Super Duty trucks, this kit (M-1821-TW) ensures maximum durability and reliability for overlanding or job site recovery tasks without compromising vehicle aesthetics.

• 12,000 lb. capacity Epic Winch Hook
• 70-foot high-strength synthetic winch line
• Ford Performance branded blue hook strap
• Complete vehicle-specific bracketry and mounting hardware included
• Precision-engineered for seamless Super Duty integration
• Manufacturer Part Number: M-1821-TW

Fits 2021-2024 Ford Bronco (Base, Badlands, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Raptor, and Wildtrak).

This genuine Ford Performance Winch Pull Strap is a direct replacement for your Bronco's off-road recovery gear. Finished in signature Ford Performance Blue, this strap provides a safe, highly visible grip point for handling your winch line. It is designed to keep your hands and fingers at a safe distance from the fairlead and winch drum while spooling the cable in or out, preventing common recovery-related injuries.

• Manufacturer Part Number: M-1821-PS
• Color: Signature Ford Performance Blue
• Material: High-strength reinforced nylon webbing
• Application: Fits 2021-2024 Ford Bronco models equipped with winches
• Safety: Provides a dedicated hand-hold to avoid pinch points at the fairlead

Fits 2005-2023 Ford Mustang models including GT, EcoBoost, Shelby GT350/GT500, Boss 302, and Mach 1.

Bring the look of the Ford Performance FP350S road race car and NASCAR Cup Series marketing vehicles to your own build with this authentic die-cut windshield banner. This official Ford Performance decal features a two-color design with white "FORD" and red "PERFORMANCE" script, providing a high-contrast, track-ready aesthetic that adheres to any properly prepared windshield surface.

• Official Ford Performance die-cut lettering
• Total length: 48 inches
• Script height: 2 inches
• Color: White "FORD" / Red "PERFORMANCE"
• Identical to banners used on Ford Performance marketing and race vehicles
• Manufacturer Part Number: M-1820-MR

Fits select 2015-2025 Ford Mustang models including EcoBoost, GT, Shelby GT350/GT500, Mach 1, and Dark Horse.

Improve your vehicle's handling tunability with these Ford Racing front adjustable strut mounts. Designed to provide precise alignment control for track-oriented performance, these mounts allow for significant camber adjustments to maximize tire contact patches during aggressive cornering. These components are the same high-performance mounts used as original equipment on the 2024 Mustang Dark Horse and the 2021-2023 Mach 1 Handling Packs.

• Provides camber adjustments up to -2.3 degrees for optimized suspension geometry
• Engineered with optimized rubber durometer to maintain handling precision while managing NVH
• Direct replacement for factory front strut mounts
• Original equipment on Mach 1 and Dark Horse Handling Packs
• Manufacturer Part Number: M-18183-MDH

Fits 2015-2023 Ford Mustang models including EcoBoost, GT, Bullitt, Mach 1, and Shelby GT350/GT500. This genuine Ford Racing FR3 Track Suspension Rear Service Shock (M-18001-AS) is specifically designed as a direct replacement component for vehicles equipped with the FR3 Track Handling Pack.

Engineered to maintain the aggressive dampening profiles required for track-day performance, this shock replaces worn or damaged units to restore the precise handling and cornering stability your Mustang was tuned for. As a service part for the FR3 series, it ensures compatibility with existing track-rated springs and sway bars, preventing the performance degradation often found with generic OE-style replacements.

• Manufacturer Part Number: M-18001-AS
• Series: FR3 Track Suspension
• Position: Rear (Fits Left or Right side)
• Quantity: Sold Individually (Single)
• Design: Monotube construction for superior heat dissipation and consistent dampening
• Installation: Direct-fit replacement for FR3 Track Handling Pack components