Fits 2024-2025 Toyota Land Cruiser 250 Series models (1958, Base, and First Edition).

The ICON Stage 5 Billet Suspension System is a high-performance suspension solution designed to enhance the off-road capability and on-road handling of the Toyota Land Cruiser 250 Series. This system features adjustable 2.5 Series front coilovers and 2.5 Aluminum Series remote reservoir rear shocks, providing superior damping and increased fluid capacity for consistent performance during aggressive driving. The included billet aluminum upper control arms (UCAs) correct front-end geometry and allow for precise on-vehicle camber and caster adjustments.

For maximum articulation without binding, this kit utilizes the patented ICON Delta Joint PRO, offering 90 degrees of total movement. The rear is supported by dual-rate coil springs that provide 2 inches of lift, balancing a soft initial rate for ride comfort with a firm overload rate for bottoming resistance. A front differential drop is included to maintain optimal CV joint angles, preserving drivetrain longevity at higher lift heights.

• Adjustable front lift height: 1.25-3" over stock
• Rear lift height: 2" over stock
• 2.5 Series front and rear shocks with remote reservoirs and 7/8" shafts
• CNC machined 6061 aircraft-grade billet aluminum UCAs
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) for maximum articulation
• Corrosion-resistant CAD plated coilover bodies
• Dual-rate rear coil springs for improved load handling
• FK Rod End bearings for reduced deflection and increased longevity
• Includes front differential drop kit for CV angle correction

Fits 2024-2025 Lexus GX550 (Luxury, Luxury+, Premium, and Premium+).

The ICON Stage 3 Suspension System is engineered to optimize the ride quality and off-road capability of the Lexus GX550. This system features adjustable front coilovers providing 1.25-3 inches of lift, paired with dual-rate rear coil springs that deliver a 2-inch lift for a leveled stance. The included tubular upper control arms (UCAs) correct front-end geometry and increase caster, while the patented Delta Joint PRO provides up to 90 degrees of articulation without the binding associated with standard ball joints.

To ensure precise axle alignment, this kit includes a 6061 billet aluminum adjustable rear track bar, allowing for on-vehicle centering of the rear axle. The suspension is rounded out by ICON 2.0 Aluminum Series internal reservoir rear shocks, featuring vehicle-specific valving to balance damping performance across all terrains. A front differential drop is also included to maintain proper CV joint angles and maximize reliable wheel travel.

• Adjustable front coilovers provide 1.25-3" lift height
• Tubular UCAs with Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• ICON 2.0 Aluminum Series rear shocks with 5/8" shafts and internal reservoirs
• CAD-plated coilover bodies with heavy-duty 7/8" shafts
• Billet 6061 aircraft-grade aluminum adjustable rear track bar
• Dual-rate rear coil springs for improved bottoming resistance and ride comfort
• Front differential drop kit preserves CV axle operating angles
• FK Rod End bearings for reduced deflection and increased longevity

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models. This ICON Vehicle Dynamics Stage 2 suspension system is engineered to enhance both on-road comfort and off-road capability by correcting front-end geometry and increasing wheel travel.

This kit features tubular upper control arms (UCAs) equipped with the patented Delta Joint PRO, providing 90 degrees of total articulation to eliminate binding during full suspension cycle. The front coilovers are height-adjustable from 1.25 to 3 inches and feature corrosion-resistant CAD-plated bodies with 7/8-inch shafts. To maintain drivetrain reliability at increased lift heights, a front differential drop is included to optimize CV joint operating angles. The rear is supported by triple-rate coil springs that provide 0.5 inches of lift while delivering a soft initial ride and a firm overload rate for superior bottoming resistance. Damping is handled by 2.0 Aluminum Series internal reservoir rear shocks with 5/8-inch shafts, specifically valved for the 2024+ Tacoma chassis.

• Adjustable coilovers provide 1.25-3" front lift height
• Tubular UCAs with Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• Triple-rate rear coil springs provide 0.5" rear lift and improved ride quality
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• CAD-plated coilover bodies with 7/8" shafts and FK Rod End bearings
• 6061 aircraft-grade aluminum CNC-machined components
• Included front differential drop maximizes wheel travel on 4WD models

Fits 2023-2025 Toyota Sequoia models (SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro).

The ICON Stage 7 Suspension System is a comprehensive performance upgrade designed to maximize the off-road capability and on-road handling of the third-generation Toyota Sequoia. This system centers around ICON V.S. 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both equipped with remote reservoirs. These reservoirs significantly increase oil volume to dissipate heat, ensuring consistent damping performance during prolonged use in rough terrain. The rear shocks also feature an internal Bump Zone that provides an additional 20% of damping force to control hard bottom-out events.

To optimize suspension geometry at increased ride heights, this kit includes ICON billet aluminum upper control arms (UCAs). These arms feature the patented Delta Joint Pro, providing 90 degrees of total articulation without the noise or maintenance issues of traditional uniballs. The UCAs allow for on-vehicle caster and camber adjustment, ensuring your Sequoia maintains factory-spec alignment and drivability. Dual-rate rear coil springs provide either 0" or 2" of lift depending on the factory package, improving load handling and ride quality.

• Adjustable front ride height from 3-4.5 inches of lift over stock
• 2.5 Series front coilovers with remote reservoirs for superior cooling
• 2.5 Aluminum Series rear remote reservoir shocks with internal Bump Zone
• Billet aluminum UCAs with patented Delta Joint Pro (U.S. Pat. 10,731,700)
• 90 degrees of joint articulation for maximum wheel travel
• Dual-rate rear coil springs for improved performance and stance
• Included sway bar drop brackets to maintain proper linkage geometry
• All ICON shock absorbers are fully rebuildable and re-tunable

Fits 2024-2025 Toyota Tacoma SR5, TRD Off-Road, TRD Sport, and Limited.

The ICON Vehicle Dynamics Stage 3 suspension system is engineered to increase wheel travel and damping performance for the fourth-generation Toyota Tacoma. This system centers on vehicle-specific 2.5 Series front coilovers, which are height-adjustable from 1.25" to 3" of lift. These coilovers feature CAD-plated bodies with 7/8" shafts and internal reservoirs for enhanced cooling. To maintain drivetrain reliability, a front differential drop bracket with polyurethane bushings is included to correct CV angles and maximize available travel on 4WD models.

To further improve front-end geometry, this kit includes ICON tubular upper control arms (UCAs). These UCAs feature the patented Delta Joint PRO, which provides 90 degrees of total articulation and built-in caster correction for better alignment and drivability. The rear suspension is upgraded with 2.0 Aluminum Series remote reservoir shocks and dual-rate Overland coil springs. These rear coils provide a 0.5" lift and are specifically tuned to maintain ride quality and height when carrying approximately 600 lbs of additional constant weight from gear, bed racks, or campers.

• Adjustable 2.5 Series front coilovers provide 1.25-3" lift height
• Tubular UCAs with patented Delta Joint PRO (U.S. Pat. 10,731,700) for 90° articulation
• Overland dual-rate rear coils designed for 0.5" lift with 600 lbs constant load
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Front differential drop kit with polyurethane mounting bushings
• Corrosion-resistant CAD plated coilover bodies with 7/8" shafts
• FK Rod End bearings for maximum longevity and minimal deflection
• CNC-machined 6061 aircraft-grade aluminum components

Fits 2024-2025 Toyota Tacoma (SR5, TRD Off-Road, TRD Sport, and Limited).

The ICON Stage 4 suspension system provides a comprehensive performance upgrade for the 2024-2025 Toyota Tacoma, engineered to increase wheel travel and damping capability for superior control both on-road and in high-speed off-road environments. This system features vehicle-specific tuned 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both equipped with remote reservoirs. These reservoirs significantly increase oil volume and surface area, providing the heat dissipation required to prevent cavitation and shock fade during aggressive use. The front coilovers are height-adjustable from 1.25 to 3 inches, allowing for increased ground clearance and room for larger wheel and tire packages.

To maintain drivetrain reliability at increased lift heights, this kit includes a front differential drop bracket with polyurethane mounting bushings, which optimizes CV axle angles and limits differential movement under load. The included tubular upper control arms (UCAs) are essential for correcting front-end geometry and adding the necessary caster for proper alignment. These UCAs feature the patented ICON Delta Joint PRO, which provides 90 degrees of articulation to eliminate binding throughout the entire range of suspension travel.

• 2.5 Series front coilovers with remote reservoirs for superior cooling and damping
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8" shafts and integrated bump zones
• Tubular UCAs with Delta Joint PRO for 90-degree articulation and increased durability
• Front differential drop maximizes CV operating angles on 4WD models
• Adjustable front lift height from 1.25-3" over factory
• Corrosion-resistant CAD plated coilover bodies with 7/8" induction-hardened shafts
• FK Rod End bearings for maximum longevity and reduced deflection
• CNC machined 6061 aircraft-grade aluminum components
• ICON-engineered coil springs

Fits 2024-2025 Toyota Tacoma (Limited, SR5, TRD Off-Road, and TRD Sport). This Stage 3 suspension system is engineered to enhance the handling and off-road capability of the fourth-generation Tacoma by increasing wheel travel and damping performance while correcting front-end geometry.

The system features vehicle-specific tuned 2.5 Series front coilover shocks with internal reservoirs for superior cooling and 7/8" shafts for heavy-duty durability. These coilovers provide 1.25-3" of adjustable lift height, allowing for larger wheel and tire combinations. To maintain driveline longevity, the included front differential drop brackets optimize CV joint angles and prevent bind at full suspension droop. The rear is supported by 2.0 Aluminum Series remote reservoir shocks and dual-rate "Overland" coil springs, specifically designed to provide a 0.5" lift while carrying approximately 600 lbs of additional constant cargo or equipment weight.

For improved alignment and strength, this kit includes ICON billet 6061 aluminum upper control arms (UCAs). These UCAs feature the patented Delta Joint PRO, offering 90 degrees of total articulation and full on-vehicle camber and caster adjustment. All components utilize FK Rod End bearings for minimal deflection and maximum service life.

• Fits 2024-2025 Toyota Tacoma models
• Adjustable 1.25-3" front lift height; 0.5" rear lift (with 600lb load)
• 2.5 Series front coilovers with CAD-plated bodies and 7/8" shafts
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Billet 6061 aircraft-grade aluminum UCAs with Delta Joint PRO
• Includes front differential drop kit with polyurethane bushings
• FK Rod End bearings for extended longevity
• Manufacturer Part Number: K53193

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models. This Stage 2 suspension system is engineered to increase wheel travel and damping performance for serious off-road use while maintaining refined street manners.

This system centers on ICON 2.5 Series front coilovers, which are height-adjustable from 1.25 to 3 inches of lift. These coilovers feature internal reservoirs for increased oil volume and cooling, paired with vehicle-specific tuned coil springs. To maintain proper front-end geometry at increased heights, the kit includes tubular upper control arms equipped with the patented Delta Joint PRO. These joints provide up to 90 degrees of articulation, allowing for full suspension cycle without binding. The included front differential drop brackets and polyurethane mounting bushings ensure optimal CV axle angles and reduced drivetrain movement under load.

The rear is equipped with dual-rate Overland coil springs designed to provide a 0.5-inch lift while specifically tuned for vehicles carrying approximately 600 lbs of additional gear. Damping is handled by ICON 2.0 Aluminum Series internal reservoir shocks, providing a balanced and controlled ride across varied terrain.

• Adjustable front lift height from 1.25-3 inches
• ICON Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• 2.5 Series front coilovers with CAD-plated bodies and 7/8-inch shafts
• 2.0 Aluminum Series rear shocks with 5/8-inch shafts
• Dual-rate rear springs optimized for 600 lbs of additional cargo
• 6061 CNC-machined aluminum components and FK Rod End bearings
• Includes front differential drop kit to maximize CV longevity

Fits 2024-2025 Toyota Tacoma SR5, TRD Off-Road, TRD Sport, and Limited models.

This ICON Stage 4 suspension system provides a complete performance overhaul for the 2024-2025 Toyota Tacoma, combining adjustable front coilovers with overland-series rear components to manage increased weight and rigorous off-road terrain. The system features 2.5 Aluminum Series remote reservoir coilovers and rear shocks, utilizing vehicle-specific valving and integrated bump zones for superior bottoming resistance. The included billet 6061 aluminum upper control arms (UCAs) correct front-end geometry and feature the patented Delta Joint PRO, offering 90 degrees of articulation without the binding typical of standard ball joints.

To handle the additional weight of bed racks, rooftop tents, or gear, the kit includes dual-rate rear coil springs designed to maintain a .5-inch lift height with approximately 600 lbs of added cargo. For 4WD models, the front differential drop kit is included to maintain proper CV axle angles at the higher 1.25-3 inch lift range, ensuring long-term drivetrain reliability.

• Adjustable coilovers provide 1.25-3 inches of front lift height
• Dual-rate rear springs net .5-inch lift with 600 lbs of constant load
• 2.5 Aluminum Series remote reservoir shocks with 7/8-inch shafts
• Billet 6061 aluminum UCAs with Delta Joint PRO for 90 degrees of articulation
• Corrosion-resistant CAD plated coilover bodies and CNC machined components
• FK Rod End bearings for minimal deflection and maximum longevity
• Includes front differential drop for optimized 4WD CV joint angles

Fits 2024-2025 Toyota Tacoma models including SR5, TRD Off-Road, TRD Sport, and Limited.

The ICON Vehicle Dynamics Stage 5 suspension system is a comprehensive performance upgrade engineered to improve the handling and stance of the 2024-2025 Toyota Tacoma. This system provides 1.25–3 inches of front lift height and 0.5 inches of rear lift (rated at 600 lbs of additional rear weight), allowing for increased fender clearance for larger wheel and tire packages. The kit features 2.5 Series front coilovers and 2.5 Aluminum Series remote reservoir rear shocks, both equipped with ICON’s CDC Valves, offering 10 specific compression damping settings to suit any terrain or load requirement.

To ensure proper front-end geometry at increased ride heights, this system includes billet 6061 aircraft-grade aluminum upper control arms (UCAs). These UCAs utilize the patented Delta Joint PRO, which provides 90 degrees of total articulation to eliminate binding during full bump and droop travel. For 4WD models, an included front differential drop kit optimizes CV joint angles to maintain drivetrain longevity. The rear is supported by dual-rate coil springs that balance on-road comfort with a firm overload rate for superior bottoming resistance.

• 2.5 Series front coilovers and remote reservoir rear shocks with 7/8-inch shafts
• CDC Valves for 10-position compression damping adjustment
• Billet aluminum UCAs with Delta Joint PRO (U.S. Pat. 10,731,700)
• Dual-rate rear coil springs providing 0.5-inch lift at 600 lbs load
• Adjustable front lift height from 1.25-3 inches
• Front differential drop kit for optimized CV axle angles
• Corrosion-resistant CAD-plated coilover bodies
• FK Rod End bearings for minimal deflection and extended service life
• 6061 CNC-machined aluminum components

Fits 2024-2025 Toyota Tacoma (SR5, TRD Off-Road, TRD Sport, and Limited).

The ICON Stage 2 Suspension System is engineered to increase wheel travel and damping performance for the 2024-2025 Toyota Tacoma. This system centers on vehicle-specific tuned 2.5 Series front coilovers featuring internal reservoirs for improved cooling and CAD-plated bodies for corrosion resistance. These coilovers provide 1.25-3" of adjustable front lift, allowing for larger wheel and tire packages while maintaining optimal geometry. The included front differential drop brackets and polyurethane mounting bushings maintain proper CV angles and limit differential movement under load.

This kit upgrades the front end with ICON billet aluminum upper control arms (UCAs) equipped with the patented Delta Joint PRO. This setup provides 90 degrees of articulation and allows for on-vehicle caster and camber adjustment. To manage heavy cargo or camping gear, the dual-rate rear Overland coil springs provide a 0.5" lift height while specifically tuned to handle approximately 600 lbs of additional rear weight.

• Adjustable front lift height: 1.25-3"
• 2.5 Series front coilovers with 7/8" hardened shafts
• 2.0 Aluminum Series internal reservoir rear shocks with 5/8" shafts
• Billet 6061 aircraft-grade aluminum UCAs with Delta Joint PRO (U.S. Pat. 10,731,700)
• Dual-rate rear coil springs for 0.5" lift and +600lb weight capacity
• FK Rod End bearings for extended longevity and minimal deflection
• CNC machined aluminum components and ICON engineered springs

Fits 2022-2025 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro).

The ICON Stage 11 Suspension System is a comprehensive handling solution designed to maximize the off-road capability and on-road manners of the 2022-2025 Toyota Tundra. This system centers on VS 2.5 Series remote reservoir front coilovers and rear shocks, featuring 2.5-inch shock bodies that increase piston area and oil volume for superior damping and heat dissipation. The integrated Compression Damping Control (CDC) Valves offer 10 user-adjustable settings, allowing you to fine-tune compression force for varying terrain and cargo loads.

To ensure proper suspension geometry and durability at increased ride heights, this kit includes ICON billet aluminum upper control arms (UCAs) equipped with the patented Delta Joint Pro, providing 90 degrees of total articulation. The rear suspension is fully optimized with billet aluminum upper and lower links for improved articulation and pinion angle adjustment, while an adjustable track bar properly centers the axle. Triple-rate rear coil springs provide a 0.5-inch lift (on non-TRD models) and a balanced tune with the front coilovers.

• 1.25-3.5" adjustable front lift height; 0.5" rear lift
• VS 2.5 Series shocks with remote reservoirs and CDC Valves (10 settings)
• Billet aluminum UCAs with Delta Joint Pro (90° total articulation)
• Billet aluminum rear upper and lower links for on-vehicle pinion adjustment
• On-vehicle adjustable rear track bar for axle centering
• Triple-rate rear coil springs improve ride quality and performance
• Up to 40% increase in front wheel travel over stock
• Included sway bar drop brackets to reduce link bind
• All shocks are fully rebuildable and re-tunable

Fits 2023-2025 Toyota Sequoia (SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro).

The ICON Stage 10 Suspension System is the ultimate performance upgrade for the 2023-2025 Toyota Sequoia, engineered to provide 3-4.5 inches of front lift height adjustability. This system centers around ICON VS 2.5 Series remote reservoir front coilovers and rear shocks, both equipped with ICON’s exclusive Compression Damping Dual Speed (CDXS) valves. These valves offer 10 precise, detented settings for both high-speed and low-speed compression, allowing you to dial in handling response and bottom-out control independently.

This comprehensive kit replaces weak factory components with CNC-machined billet aluminum upper control arms and rear links. The UCAs feature the patented Delta Joint Pro, providing up to 90 degrees of total articulation without the binding associated with standard ball joints. The inclusion of an adjustable rear track bar and sway bar drop brackets ensures proper axle alignment and geometry throughout the increased suspension travel.

• Adjustable 3-4.5" front lift height for larger wheel and tire fitment
• 2.5 Series shocks with remote reservoirs for increased oil volume and cooling
• CDXS adjusters for 10-position high and low-speed compression tuning
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700)
• Billet aluminum rear upper and lower links for improved articulation
• Dual-rate rear coil springs for optimized ride quality
• On-vehicle adjustable rear track bar for precise axle centering
• Fully rebuildable and re-tunable shock absorbers

Fits 2022-2025 Toyota Tundra 1794 Edition, Limited, Platinum, SR, SR5, and TRD Pro models.

The ICON Stage 11 Suspension System is the definitive performance upgrade for the 2022-2025 Toyota Tundra, providing between 1.25" and 3.5" of front lift height. This system features VS 2.5 Series remote reservoir front coilovers and rear shocks, all equipped with ICON’s Compression Damping Control (CDC) Valves. These valves provide 10 levels of externally adjustable compression damping, allowing you to optimize ride quality for everything from highway towing to aggressive off-road use.

To handle the increased wheel travel—up to a 40% increase over stock—this kit includes billet aluminum front upper control arms (UCAs) equipped with the patented Delta Joint Pro, offering 90 degrees of articulation. The rear suspension is completely overhauled with triple-rate coil springs, billet aluminum upper and lower links for pinion angle adjustment, and an adjustable track bar to ensure the rear axle remains perfectly centered.

• VS 2.5 Series remote reservoir front coilovers and rear shocks
• ICON CDC Valves with 10 compression damping force ranges
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700)
• Triple-rate rear coil springs (.75" lift on TRD models)
• Billet aluminum rear upper and lower links for pinion adjustment
• On-vehicle adjustable rear track bar
• Up to 40% increase in front wheel travel
• Vehicle-specific valving and 2.5-inch shock bodies for heat dissipation
• Fully rebuildable and re-tunable shock absorbers
• Includes sway bar drop brackets to reduce link bind

Fits 2023-2025 Toyota Sequoia models, including SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

The ICON Vehicle Dynamics Stage 8 suspension system provides the ultimate performance upgrade for the third-generation Toyota Sequoia. This comprehensive system is engineered to maximize suspension travel and ground clearance while enabling fitment of up to 35-inch tires. By integrating CNC-machined billet aluminum rear lower links and front upper control arms, this kit increases chassis strength and provides essential on-vehicle adjustability for caster, camber, and pinion angles.

Damping is handled by 2.5 Series remote reservoir front coilovers and 2.5 Aluminum Series rear remote reservoir shocks, which offer increased fluid capacity for superior heat dissipation and consistent performance during high-speed off-road use. The billet front UCAs feature the patented Delta Joint Pro, providing 90 degrees of total articulation to prevent binding at full droop.

• Adjustable front ride height: 3-4.5 inches over stock
• Dual rate rear coil springs provide 2-inch or 4-inch lift depending on factory package
• 2.5 Series front and rear remote reservoir shocks for optimized cooling and control
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• Billet aluminum rear lower links allow for on-vehicle pinion angle adjustment
• Fully rebuildable and re-tunable shock absorbers
• Includes front sway bar drop brackets to maintain proper OE link geometry
• Accommodates up to 35-inch tires

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models (including TRD Pro and 1794 Edition).

The ICON Stage 9 Suspension System provides a complete performance overhaul for the Toyota Tundra and Sequoia platform. This system is centered around VS 2.5 Series remote reservoir front coilovers and rear shocks, all featuring ICON’s exclusive Compression Damping Dual Speed (CDXS) valves. CDXS technology allows for independent adjustment of high-speed and low-speed compression force through 10 discreet settings, enabling precise tuning for handling response and off-road aggressiveness.

To support the increased ride height and travel, this kit includes tubular front upper control arms equipped with the patented Delta Joint Pro. This joint provides 90 degrees of total articulation to prevent binding and allows for up to a 40% increase in front wheel travel over factory specifications. The 2.5-inch shock bodies offer significantly more surface area and oil volume than OE dampers, resisting cavitation and fade during high-intensity use.

• Adjustable front lift height from 2-3.5 inches over stock
• VS 2.5 Series remote reservoir front and rear shocks for superior thermal management
• CDXS external adjusters for high and low-speed compression damping
• Tubular UCAs with Delta Joint Pro for improved strength and alignment geometry
• Includes sway bar drop brackets to reduce bind in factory links
• Vehicle-specific valving and shock lengths for optimized ride quality
• Fully rebuildable and re-tunable internal components

The ICON Stage 7 suspension system provides a comprehensive performance overhaul for the 2023-2025 Toyota Sequoia. At the core are ICON V.S. 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both equipped with remote reservoirs. These reservoirs significantly increase oil capacity to manage heat and provide consistent damping during aggressive off-road use. The rear shocks feature an internal Bump Zone that adds 20% more damping force at the end of the stroke to prevent harsh bottom-outs.

Strength and alignment are addressed through CNC-machined billet aluminum Upper Control Arms (UCAs). These arms feature the patented Delta Joint Pro (U.S. Pat. 10,731,700), which supports up to 90 degrees of total articulation. Combined with dual-rate rear coil springs and sway bar drop brackets, this system maximizes wheel travel and improves ride quality without overstressing factory components.

• Front ride height adjustable from 3" to 4.5" of lift
• V.S. 2.5 Series remote reservoir front coilovers for superior cooling
• 2.5 Aluminum Series remote reservoir rear shocks with internal Bump Zone
• Billet aluminum UCAs with high-articulation Delta Joint Pro
• Dual-rate rear coil springs provide 2" to 4" of lift based on trim
• Sway bar drop brackets included to reduce link bind
• Fully rebuildable and re-tunable shock absorbers

Fits 2023-2025 Toyota Sequoia 1794 Edition, Capstone, Limited, Platinum, and SR5.

The ICON Vehicle Dynamics Stage 1 suspension system provides a significant performance upgrade for the 2023-2025 Toyota Sequoia, delivering improved damping on-road and increased capability off-road. This system levels the vehicle’s stance and provides enough clearance for the fitment of up to 35-inch tires. At the front, the 2.5 EXP Series coilovers utilize a snap-ring adjustment system to achieve 0-2.13 inches of lift while retaining the factory coil springs and hardware. The rear is equipped with dual-rate coil springs and 2.0 Aluminum Series nitrogen-charged monotube shocks with internal reservoirs for a balanced, controlled ride across varied terrain.

• Adjustable front lift height (0-2.13 inches) via snap-ring on 2.5 EXP Series front shocks
• Dual-rate rear coil springs provide 0 or 2 inches of rear lift depending on factory suspension package
• 2.0 Aluminum Series rear shocks feature a nitrogen-charged monotube design with internal reservoirs
• Included sway bar drop brackets reduce bind in original equipment sway bar links
• Engineered to allow full wheel travel without overstressing factory suspension components
• Shock absorbers are fully rebuildable and re-tunable for long-term serviceability
• Complete bolt-on system designed specifically for the 2023-2025 Sequoia chassis

Fits 2023-2025 Toyota Sequoia (SR5, Limited, Platinum, Capstone, TRD Pro, and 1794 Edition).

The ICON Vehicle Dynamics Stage 4 suspension system for the 2023-2025 Toyota Sequoia provides a comprehensive handling upgrade designed for both technical off-road terrain and improved highway manners. This system centers on ICON 2.5 Series threaded-body front coilovers, offering adjustable front lift heights from 3 to 4.5 inches. By increasing front-end ride height, this kit allows for the fitment of up to 35-inch tires while correcting the factory rake for a leveled stance.

The Stage 4 kit distinguishes itself with the inclusion of CNC-machined billet aluminum upper control arms (UCAs). These arms feature the patented Delta Joint Pro (U.S. Pat. 10,731,700), providing 90 degrees of total articulation to prevent binding during maximum suspension travel. The UCAs allow for on-vehicle caster and camber adjustment, ensuring optimal alignment specs and drivability after lifting. To maintain rear stability, the kit includes dual-rate coil springs and nitrogen-charged 2.0 Aluminum Series monotube shocks with internal reservoirs.

• Adjustable front lift height from 3" to 4.5" over stock
• Billet aluminum UCAs with on-vehicle caster/camber adjustment
• Patented Delta Joint Pro with 90 degrees of total articulation
• V.S. 2.5 Series front coilovers with internal reservoirs for superior damping
• 2.0 Aluminum Series rear shocks provide a balanced, vehicle-specific tune
• Dual-rate rear coil springs provide 2" or 4" of lift (depending on OE package)
• Sway bar drop brackets included to reduce bind in factory links
• Fully rebuildable and re-tunable shock absorbers
• Accommodates up to 35" tires

Fits 2024-2025 Toyota Tacoma (Limited, SR5, TRD Off-Road, TRD Sport).

The ICON Stage 2 suspension system provides a comprehensive performance upgrade for the 2024-2025 Toyota Tacoma, combining adjustable front lift height with precision-engineered components to correct suspension geometry. This system features billet aluminum upper control arms (UCAs) that allow for on-vehicle caster and camber adjustment, ensuring optimal alignment and drivability after lifting. These UCAs are equipped with the patented Delta Joint PRO, which provides 90 degrees of total articulation to eliminate binding during full suspension travel.

To manage the rear, ICON utilizes triple-rate coil springs that deliver a plush ride on-road while providing a firmer overload rate for superior bottoming resistance in technical terrain. The package is rounded out by 2.0 Aluminum Series internal reservoir rear shocks, featuring vehicle-specific valving to balance the truck's performance across all four corners. For 4WD models, an included front differential drop kit ensures CV joints maintain proper operating angles at maximum travel.

• Adjustable front coilovers provide 1.25-3" of lift height
• CNC machined 6061 aircraft-grade billet aluminum UCAs
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) with 90° articulation
• Triple-rate rear coil springs providing 0.5" of rear lift
• Corrosion-resistant CAD-plated coilover bodies with 7/8" shafts
• 2.0 Aluminum Series rear shocks with 5/8" shafts
• FK Rod End bearings for minimal deflection and extended service life
• Front differential drop kit for optimized CV joint angles

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport models.

The ICON Stage 1 Suspension System provides a significant upgrade in damping performance and wheel travel for the 2024+ Toyota Tacoma. This system features vehicle-specific valving and adjustable front coilovers, allowing for 1.25 to 3 inches of front lift height to accommodate larger tire packages. By combining 2.5 Series front coilovers with 2.0 Aluminum Series rear shocks, ICON delivers a balanced ride that improves control on technical trails without sacrificing on-road comfort.

Engineered for durability, the kit includes corrosion-resistant CAD plated shock bodies with 7/8-inch induction-hardened shafts and 6061 CNC-machined aluminum components. To protect your drivetrain, a front differential drop bracket is included to maintain proper CV angles at maximum extension. Polyurethane differential mounting bushings replace the soft factory units to limit unwanted movement under heavy load while keeping the front suspension performing at its peak.

• Adjustable front lift height from 1.25" to 3"
• 2.5 Series front coilovers with internal reservoirs and 7/8" shafts
• 2.0 Aluminum Series rear shocks with 5/8" shafts
• Vehicle-specific valving for optimized ride and handling
• FK Rod End bearings for durability and minimal deflection
• Front differential drop maintains proper CV joint angles
• 6061 aircraft-grade aluminum CNC-machined components
• CAD plated shock bodies for superior corrosion resistance
• ICON engineered coil springs for superior vehicle feel

Fits select 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models, including TRD Pro and 1794 Editions. This Stage 8 system provides a comprehensive suspension upgrade designed to increase front wheel travel by up to 40% while delivering 1.25–3.5” of adjustable lift height.

At the core of this system are ICON VS 2.5 Series remote reservoir front coilovers and rear shocks. The 2.5” shock bodies offer significantly more piston area than factory components, while the remote reservoirs increase oil volume and surface area for superior heat dissipation. This prevents overheating and cavitation during sustained hard use, ensuring consistent damping performance without fade. The included billet aluminum upper control arms (UCAs) feature the patented Delta Joint Pro, providing 90 degrees of total articulation and allowing for on-vehicle caster/camber adjustments.

• VS 2.5 Series front coilovers and rear shocks with remote reservoirs
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90° articulation
• Adjustable front lift height from 1.25–3.5”
• Billet rear lower links for on-vehicle pinion angle adjustment
• Up to 40% increase in front wheel travel over stock
• Includes sway bar drop brackets to reduce bind
• Fully rebuildable and re-tunable shock absorbers

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (Select Submodels).

The ICON Stage 8 Suspension System is a comprehensive performance overhaul for the 2022-2025 Tundra and Sequoia, delivering an adjustable 2-3.5 inches of front lift height. This system features ICON V.S. 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both engineered with remote reservoirs for superior heat dissipation and consistent damping under heavy use. The rear shocks include an internal Bump Zone, which provides an additional 20% of damping force to prevent harsh bottom-outs during aggressive off-road driving.

This stage includes tubular Upper Control Arms (UCAs) equipped with patented Delta Joint Pro (U.S. Pat. 10,731,700), allowing for up to 90 degrees of total articulation and a 40% increase in front wheel travel over stock. To further refine the rear suspension, tubular rear lower links are included to allow for precise pinion angle adjustment and increased articulation, while sway bar drop brackets ensure the factory sway bar links remain bind-free.

• Adjustable front lift height: 2-3.5 inches
• V.S. 2.5 Series front coilovers with remote reservoirs
• 2.5 Aluminum Series rear shocks with remote reservoirs and internal Bump Zone
• Tubular UCAs with Delta Joint Pro for 90 degrees of articulation
• Tubular rear lower links for pinion angle correction
• Up to 40% increase in front wheel travel over factory components
• Included sway bar drop brackets to reduce bind
• Fully rebuildable and re-tunable shock absorbers

Fits 2023-2025 Toyota Sequoia (1794 Edition, Capstone, Limited, Platinum, SR5, and TRD Pro).

The ICON Stage 6 Suspension System is a comprehensive performance upgrade designed to significantly enhance the off-road capability and on-road handling of the 2023-2025 Toyota Sequoia. This system centers on VS 2.5 Series front coilovers with remote reservoirs, providing 3-4.5 inches of adjustable lift height. By increasing the piston area and shock body size to 2.5 inches, this kit achieves up to a 40% increase in suspension travel over factory components. The remote reservoirs increase oil volume and surface area, providing critical heat dissipation to prevent shock fade during aggressive use.

For superior articulation and durability, this system includes ICON tubular front upper control arms equipped with the patented Delta Joint Pro, allowing for 90 degrees of total movement. The rear is supported by dual-rate coil springs and 2.0 Aluminum Series remote reservoir shocks, ensuring a balanced and controlled ride. All ICON shock absorbers in this kit are fully rebuildable and re-tunable, providing a long-term suspension solution for demanding environments.

• 3-4.5" adjustable front lift height over stock
• VS 2.5 Series front coilovers with remote reservoirs
• 2.0 Aluminum Series remote reservoir rear shocks
• Tubular front UCAs with patented Delta Joint Pro (90° articulation)
• Dual-rate rear coil springs for improved load handling and ride quality
• Sway bar drop brackets included to maintain proper link geometry
• Vehicle-specific valving for maximum control and comfort
• Bolt-on design with rebuildable and re-tunable components

Fits 2003-2009 Lexus GX470 Base models.

This ICON Stage 4 suspension system is a comprehensive handling and lift solution designed to improve wheel travel and damping control while eliminating the factory rear air suspension. The front is anchored by 2.5 Series extended travel coilovers featuring corrosion-resistant CAD-plated bodies and 7/8" shafts, paired with tubular steel Delta Joint upper control arms. These UCAs correct suspension geometry for precise alignment and use the patented Delta Joint to combine the durability of a ball joint with the performance of a uniball.

The rear setup includes a coil spring conversion kit to replace the original air bags with ICON 2" lift coil springs. Performance is managed by 2.5 Aluminum Series remote reservoir shocks and adjustable tubular rear lower links. These links use multi-durometer bushings to provide correct roll steer geometry and allow for pinion angle adjustment, ensuring predictable handling on and off the trail.

• Front adjustable lift height: 0-3.5"; Rear lift height: 2"
• 2.5 Series front coilovers and rear remote reservoir shocks with 7/8" shafts
• Tubular steel Delta Joint upper control arms improve travel and geometry
• Rear air-to-coil conversion kit replaces factory air suspension system
• Adjustable tubular rear lower links for optimized pinion angle and strength
• CNC machined 6061 aircraft-grade aluminum components
• FK Rod End bearings for minimal deflection and extended service life
• Bolt-on installation requires no cutting or welding

Fits 2023-2025 Toyota Sequoia models, including SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

The ICON Stage 5 suspension system is engineered for the 2023-2025 Toyota Sequoia owner seeking a balance of refined street manners and high-performance off-road capability. This system centers around ICON 2.5 Series front coilovers and billet aluminum upper control arms (UCAs), paired with V.S. 2.0 Aluminum Series rear remote reservoir shocks. The billet UCAs provide superior strength and allow for on-vehicle caster and camber adjustment to maintain proper alignment geometry after lifting. They feature the patented Delta Joint Pro, providing up to 90 degrees of articulation for maximum wheel travel without the noise or maintenance of traditional spherical bearings.

Damping is handled by internal reservoir 2.5 Series coilovers up front and 2.0 Aluminum Series shocks in the rear. The rear shocks utilize remote reservoirs to increase oil capacity, effectively dissipating heat during extended use on washboard roads or technical trails. Dual-rate rear coil springs provide 0 to 2 inches of lift depending on the factory trim, ensuring consistent ride quality even when the vehicle is loaded with gear.

• Adjustable front ride height from 3-4.5 inches of lift over stock
• Billet aluminum UCAs with patented Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• 2.5 Series front coilovers with internal reservoirs for superior damping
• V.S. 2.0 Aluminum Series rear shocks with remote reservoirs for cooler operating temperatures
• Dual-rate rear coil springs provide 0" or 2" lift based on OE suspension package
• Sway bar drop brackets included to maintain factory link geometry and reduce bind
• Fully rebuildable and re-tunable shock absorbers
• Complete bolt-on installation with no overstressing of OE components

Fits 2022-2025 Toyota Tundra (all submodels) and 2023-2025 Toyota Sequoia (TRD Pro, 1794 Edition).

The ICON Stage 7 suspension system provides a comprehensive damping and geometry upgrade for the current generation Tundra and Sequoia. At the core of this system are the VS 2.5 Series remote reservoir front coilovers, which deliver up to 3.5 inches of lift to accommodate larger wheel and tire packages. By utilizing remote reservoirs, these shocks offer significantly increased oil volume and surface area, effectively dissipating heat to prevent cavitation and shock fade during high-speed desert runs or technical trails.

This system includes ICON billet aluminum upper control arms (UCAs), which are essential for maintaining proper caster and camber at increased ride heights. These UCAs feature the patented Delta Joint Pro, providing 90 degrees of articulation for maximum travel without the bind or premature wear associated with standard ball joints. The combination of vehicle-specific valving and increased piston area results in up to a 40% increase in front wheel travel over the factory configuration.

• Front ride height adjustable from 1.25-3.5 inches over stock
• VS 2.5 Series front coilovers with remote reservoirs for superior heat management
• Billet aluminum upper control arms with patented Delta Joint Pro (U.S. Pat. 10,731,700)
• 2.5 Aluminum Series rear remote reservoir shocks for balanced damping
• Increases front wheel travel by up to 40%
• Included sway bar drop brackets to maintain proper linkage geometry
• All shock absorbers are fully rebuildable and re-tunable for long-term service
• Direct bolt-on installation for 2022-2025 models

Fits select 2022-2025 Toyota Tundra and Sequoia models, including TRD Pro, 1794 Edition, Limited, Platinum, SR, and SR5 trims.

The ICON Stage 10 suspension system is the ultimate performance upgrade for the 2022-2025 Tundra and Sequoia platform, engineered to deliver up to 3.5 inches of front lift and a 40% increase in wheel travel. This system centers on ICON VS 2.5 Series remote reservoir front coilovers and rear shocks, providing superior damping and heat dissipation for sustained off-road use. Each shock is equipped with ICON’s Compression Damping Control (CDC) Valves, offering 10 externally adjustable settings to fine-tune ride quality for any terrain or load.

Strength and geometry are handled by ICON billet aluminum front upper control arms (UCAs), featuring the patented Delta Joint Pro for 90 degrees of articulation. To further refine the drivetrain and rear suspension, this kit includes billet aluminum rear upper and lower links that allow for on-vehicle pinion angle adjustment. The inclusion of sway bar drop brackets ensures the factory links operate without binding, resulting in a balanced, high-performance suspension setup that is fully rebuildable and re-tunable.

• VS 2.5 Series coilovers with 2.5-inch shock bodies for increased piston area and oil volume
• Remote reservoirs on all four corners for maximum heat dissipation and fade resistance
• CDC Valves provide 10 levels of compression damping adjustment
• Billet aluminum UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for superior strength and articulation
• Billet rear upper and lower links for precise rear end alignment and pinion adjustment
• Adjustable front ride height from 1.25 to 3.5 inches over stock
• Vehicle-specific valving for optimized on- and off-road performance
• Included sway bar drop brackets to reduce binding

Fits select 2022-2025 Toyota Tundra and Sequoia models.

The ICON Stage 9 suspension system is a comprehensive performance upgrade for the 2022-2025 Toyota Tundra and Sequoia, engineered to provide 2-3.5 inches of lift while drastically improving damping control. This system centers on ICON VS 2.5 Series remote reservoir front coilovers and rear shocks, both equipped with ICON’s Compression Damping Control (CDC) Valve technology. These externally adjustable valves offer 10 distinct damping settings, allowing you to tune the suspension for varying cargo loads or terrain types with the turn of a knob.

To optimize suspension geometry, this kit includes ICON tubular front upper control arms (UCAs). These arms feature the patented Delta Joint Pro (U.S. Pat. 10,731,700), providing 90 degrees of total articulation to allow for up to a 40% increase in front wheel travel without overstressing factory components. The 2.5-inch shock bodies and remote reservoirs increase oil volume and surface area, providing superior heat dissipation to resist cavitation and damper fade during high-intensity off-road use.

• Front ride height adjustability: 2-3.5" over stock
• CDC Valve technology with 10 user-adjustable compression damping settings
• Tubular UCAs with Delta Joint Pro for 90-degree articulation and durability
• Up to 40% increase in front wheel travel over stock equipment
• 2.5 Series remote reservoir shocks for increased oil volume and cooling
• Sway bar drop brackets included to reduce bind in factory links
• Fully rebuildable and re-tunable shock absorbers for long-term service

Fits select 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (including 1794 Edition and TRD Pro) models. This Stage 10 suspension system provides the ultimate level of performance and adjustability, utilizing ICON VS 2.5 Series remote reservoir front coilovers and matching 2.5 Aluminum Series rear shocks to deliver up to a 40% increase in wheel travel over factory components.

This system is centered around ICON’s Compression Damping Control (CDC) Valve technology. These externally adjustable valves restrict oil flow into the reservoir, allowing for 10 distinct compression damping settings to fine-tune your ride for anything from high-speed desert washouts to heavy towing. The included tubular front Upper Control Arms (UCAs) feature the patented Delta Joint Pro, which provides up to 90 degrees of total articulation while correcting suspension geometry for improved alignment and drivability at lifted heights.

To complete the package, ICON includes tubular rear upper and lower links for improved articulation and pinion angle adjustment, along with sway bar drop brackets to reduce bind in the OE links. Every shock in this kit is fully rebuildable and re-tunable to ensure a lifetime of service.

• Adjustable front lift height of 2-3.5" over stock
• VS 2.5 Series shocks with remote reservoirs for increased oil volume and heat dissipation
• ICON CDC Valves for 10-position compression damping adjustment
• Tubular front UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• Tubular rear upper and lower links for superior strength and pinion adjustment
• Allows for up to 40% increase in front wheel travel
• Fully rebuildable and re-tunable shock absorbers
• Includes sway bar drop brackets for reduced bind