Fits select 2005-2023 Toyota Tacoma models including TRD Off-Road, TRD Pro, TRD Sport, SR5, and Pre Runner.

ICO 2.5 Series Coilover Kits are designed to overhaul your Tacoma's front suspension, providing significantly improved damping capacity and heat management compared to factory struts. These coilovers utilize a large 2.5-inch diameter shock body that increases oil volume, ensuring consistent performance even during prolonged off-road use. The threaded shock bodies allow for precise ride height adjustments, enabling you to level your truck or clear larger wheel and tire combinations.

• Large 2.5-inch diameter shock bodies for increased cooling and fluid capacity
• Threaded body design for adjustable front ride height
• Application-specific valving for the 2005-2023 Toyota Tacoma chassis
• Complete assembly for a direct-fit, bolt-on installation
• Heavy-duty coil springs matched to the vehicle weight and suspension geometry

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (Select Submodels).

The ICON Stage 9 suspension system is a comprehensive handling upgrade engineered to provide maximum wheel travel and adjustable damping control for the 2022-2025 Toyota Tundra and Sequoia. This system features VS 2.5 Series front coilovers and rear shocks, both equipped with remote reservoirs for superior heat dissipation and increased oil volume during sustained off-road use. The highlight of this system is the ICON CDC (Compression Damping Control) Valve, an externally adjustable multi-stage valve that allows you to fine-tune your ride with 10 distinct settings ranging from soft to hard.

To correct suspension geometry at increased lift heights, this kit includes ICON billet aluminum upper control arms. These UCAs feature the patented Delta Joint Pro, providing up to 90 degrees of articulation to prevent binding. The combination of specific valving and billet UCAs allows for up to a 40% increase in front wheel travel over the factory configuration. All shock absorbers in this kit are fully rebuildable and re-tunable to ensure long-term service life.

• 1.25-3.5" adjustable front lift height
• VS 2.5 Series remote reservoir front coilovers and rear shocks
• ICON CDC Valves with 10 compression damping settings
• Billet aluminum UCAs with Delta Joint Pro (90-degree articulation)
• Up to 40% increase in front wheel travel over stock
• Large 2.5" shock bodies for increased piston area and damping force
• Includes sway bar drop brackets to reduce link bind
• Fully rebuildable and re-tunable dampers

Fits select 2022-2025 Toyota Tundra and 2025 Toyota Sequoia models.

The ICON Vehicle Dynamics Stage 2 suspension system levels the stance and increases the front-end lift of your vehicle by 2-3 inches, providing the necessary clearance for up to 35-inch tires. This system builds upon the 2.5 EXP Series front shocks by adding tubular upper control arms (UCAs), which are essential for maintaining proper alignment and maximizing wheel travel at taller ride heights. The 2.5 EXP shocks utilize the factory coil springs and hardware for a streamlined installation, while the rear is supported by 2.0 Aluminum Series nitrogen-charged monotube shocks for a balanced, high-performance tune.

For durability and articulation, the included tubular UCAs feature the patented Delta Joint Pro (U.S. Pat. 10,731,700), capable of 90 degrees of total articulation to prevent binding during suspension cycle. This 100% bolt-on system requires no cutting, drilling, or welding, and all ICON shock absorbers are fully rebuildable and re-tunable for long-term service life.

• Adjustable front ride height from 2-3 inches of lift using snap-ring adjustment
• Tubular UCAs with Delta Joint Pro for 90 degrees of articulation and strength
• 2.5 EXP Series front shocks with internal reservoirs (compatible with OE coils)
• 2.0 Aluminum Series nitrogen-charged monotube rear shocks
• Sway bar drop brackets included to reduce bind in factory links
• Allows for full wheel travel without overstressing OE components
• Bolt-on installation with no drilling or cutting required
• Accommodates up to 35-inch tires

Fits 2021-2023 Ford Bronco models equipped with the HOSS 2.0 suspension package, including Badlands, Wildtrak, and Sasquatch-equipped trims.

The ICON Vehicle Dynamics Stage 1 Suspension System upgrades your Bronco's damping performance and wheel travel for superior handling on and off-road. This system features front and rear 2.5 EXP Series coilovers, which combine the durability of a fully rebuildable 2.5-inch diameter premium shock absorber with the practicality of retaining your factory coil springs. Using a series of precision-machined snap-ring grooves, these shocks provide easily selectable ride height adjustments, offering 0-2” of front lift and 0-1.75" of rear lift over stock HOSS 2.0 height.

• One-piece, impact-extruded, hard-anodized aluminum cylinders for maximum corrosion resistance and heat dissipation
• Adjustable ride heights via snap-ring grooves (0-2” front lift / 0-1.75" rear lift)
• Inverted shaft-up design featuring 7/8” diameter, induction-hardened, chrome-plated shafts
• PTFE-lined spherical bearings for minimal deflection and extended service life
• CNC-machined 6061 aluminum components with a protective black anodized finish
• 100% bolt-on installation - utilizes factory coils and hardware with no cutting or welding required
• Fully rebuildable and re-tunable internal design
• Includes complete set of (4) 2.5 Aluminum Series EXP Shocks with internal reservoirs

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models.

The ICON Vehicle Dynamics Stage 4 suspension system provides a comprehensive handling upgrade for the current generation Tundra and Sequoia. This system centers on ICON V.S. 2.5 Series threaded-body front coilovers and CNC-machined billet aluminum upper control arms. By increasing front-end lift by up to 3.5 inches, this kit provides the clearance necessary for 35-inch tires while significantly improving damping performance across varied terrain.

The included billet UCAs feature the patented Delta Joint Pro, providing 90 degrees of total articulation to prevent binding and allow for up to a 40% increase in front wheel travel over the factory setup. These arms offer on-vehicle adjustment for caster and camber to ensure proper alignment geometry. To complement the front, 2.0 Aluminum Series nitrogen-charged monotube shocks are valved specifically to match the front coilovers for a balanced, controlled ride.

• Front Lift Height: 1.25-3.5 inches over stock
• V.S. 2.5 Series front coilovers with internal reservoirs
• 2.0 Aluminum Series rear shocks with internal reservoirs
• CNC-machined 6061 billet aluminum upper control arms
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) with 90° total articulation
• Includes front sway bar drop brackets to reduce bind in OE links
• 100% bolt-on installation; no cutting, drilling, or welding required
• Fully rebuildable and re-tunable shock absorbers

Fits select 2021-2023 Ford Bronco models equipped with the factory HOSS 2.0 suspension package (Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, and Heritage editions).

The ICON Vehicle Dynamics Stage 2 Suspension System provides a significant performance upgrade for the HOSS 2.0-equipped Ford Bronco. This system centers on front and rear 2.5 EXP Series coilovers, which bridge the gap between basic replacement shocks and full-blown race coilovers. By utilizing the Bronco's factory coil springs, the EXP series offers a high-performance 2.5-inch diameter shock body that is fully rebuildable and re-tunable while maintaining a cost-effective installation.

This Stage 2 kit adds ICON Tubular Upper Control Arms (UCAs) featuring the patented Delta Joint Pro. These arms provide necessary alignment correction and increased strength for lifted applications. The Delta Joint Pro allows for up to 90 degrees of total articulation, ensuring maximum wheel travel and durability without the binding or noise issues common with traditional uniballs.

• 2.5 EXP Series Shocks: Features impact-extruded, hard-anodized aluminum cylinders for superior corrosion resistance and cooling.
• Adjustable Lift: Snap-ring grooves provide selectable ride heights: 1.375-3" of front lift and 1.5-2.25" of rear lift over stock HOSS 2.0 height.
• Delta Joint Pro: Patented (U.S. Pat. 10,731,700) heavy-duty high-angle ball joint with 90 degrees of articulation.
• Robust Internals: Inverted shaft-up design with 7/8" induction-hardened, chrome-plated shafts and PTFE-lined spherical bearings.
• Bolt-On Installation: 100% bolt-on design requires no cutting or welding; utilizes factory coil springs and hardware.
• Premium Materials: CNC-machined 6061 aluminum components with a black anodized finish for lasting durability.

Fits select 2021-2023 Ford Bronco models equipped with the Sasquatch Package, including Badlands, Wildtrak, Everglades, and Heritage editions.

The ICON Vehicle Dynamics Stage 3 Suspension System is engineered to maximize the off-road capability of Sasquatch-equipped Ford Broncos. This system centers around precision-manufactured internal reservoir coilover shocks, custom-valved to provide superior damping and vehicle control across technical terrain and highway stretches alike. These coilovers provide an adjustable ride height of 2-3” of front lift and 1.25-2.25” of rear lift over the factory Sasquatch height, accommodating up to 35-inch tires with ease (or 37-inch tires with optional up-travel limiters).

To maintain proper suspension geometry and alignment at increased lift heights, the Stage 3 kit includes ICON’s tubular Upper Control Arms (UCAs). These arms feature the patented Delta Joint PRO, which provides a massive 90 degrees of articulation for maximum bind-free travel. The rear suspension is further optimized with shaft-up oriented shocks and unique triple-rate coil springs, ensuring the best possible ride quality through the entire 14 inches of available rear travel.

• Fits 2021-2023 Ford Bronco 4-Door with Sasquatch Package
• Adjustable lift height: 2-3” front / 1.25-2.25” rear
• Front travel: Up to 11.5”; Rear travel: Up to 14”
• Tubular Upper Control Arms with patented Delta Joint PRO (90° total articulation)
• Internal reservoir front and rear shocks with corrosion-resistant CAD plated bodies
• Heavy-duty 7/8” diameter shock shafts
• Triple-rate rear coil springs for optimized load handling and ride quality
• CNC-machined 6061 aircraft-grade aluminum components
• 100% bolt-on installation; no cutting, drilling, or welding required
• Includes PTFE-lined spherical bearings and high-strength alloy lower bar pins

Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia (Select submodels).

The ICON Stage 6 Suspension System provides a comprehensive handling and travel upgrade for the 2022-2025 Tundra and Sequoia platforms. This system centers on VS 2.5 Series front coilovers with remote reservoirs, paired with ICON billet aluminum upper control arms to achieve a 40% increase in front wheel travel over stock. The adjustable coilovers allow for 1.25 to 3.5 inches of lift, providing clearance for larger, more aggressive tire fitments while maintaining superior ride quality on and off the trail.

Engineering highlights include the patented Delta Joint Pro, which offers 90 degrees of total articulation to prevent binding during extreme suspension cycling. For the rear, 2.0 Aluminum Series remote reservoir shocks provide a balanced tune that manages heat and resists cavitation during high-speed washboard or heavy-load use. This 100% bolt-on system requires no cutting or welding, making it a fully reversible and rebuildable solution for serious enthusiasts.

• Fits 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia models
• Front Lift Height: 1.25–3.5" (adjustable)
• VS 2.5 Series front coilovers with remote reservoirs for maximum cooling
• 2.0 Aluminum Series rear remote reservoir shocks
• Billet aluminum UCAs with patented Delta Joint Pro (U.S. Pat. 10,731,700)
• 90 degrees of total articulation for maximum travel
• Up to 40% increase in front wheel travel over factory components
• Includes sway bar drop brackets to maintain proper geometry
• Fully rebuildable and re-tunable shock absorbers
• 100% Bolt-on installation; no welding or cutting required

Fits 2010-2024 Toyota 4Runner, 2010-2023 Lexus GX460, and 2010-2014 Toyota FJ Cruiser.

This ICON Stage 3 suspension system is a comprehensive handling and lift solution designed to increase wheel travel and correct suspension geometry on Toyota and Lexus mid-size SUVs. The front end is anchored by 2.5-inch diameter coilover shocks featuring internal reservoirs and height adjustability from 0 to 3.5 inches of lift. These are paired with tubular steel upper control arms (UCAs) featuring the patented Delta Joint, which provides the high-angle performance of a uniball with the durability and weather resistance of a sealed ball joint.

To balance the vehicle's dynamics, the rear includes 2-inch lift coil springs and 2.0 Aluminum Series internal floating piston (IFP) shocks with vehicle-specific valving. The addition of tubular rear lower links provides superior strength over factory units and allows for precise pinion angle adjustment. An included adjustable rear track bar ensures compatibility with Lexus KDSS systems and maintains correct axle alignment after lifting. This bolt-on kit requires no cutting or welding for installation.

• Adjustable 0-3.5" front lift height for larger wheel and tire fitment
• 2.5-inch diameter front coilovers with corrosion-resistant CAD plated bodies and 7/8" shafts
• Tubular steel UCAs with patented Delta Joint for improved alignment and strength
• Tubular rear lower links with multi-durometer bushings for reduced bind and improved roll steer
• Adjustable rear track bar for KDSS compatibility and axle centering
• 2.0 Aluminum Series rear shocks with 5/8" shafts and 6061 CNC machined components
• FK Rod End bearings for maximum longevity and minimal deflection

Fits 2021-2023 Ford Bronco Base, Big Bend, Black Diamond, and Outer Banks models equipped with the HOSS 1.0 Suspension Package.

The ICON Vehicle Dynamics Stage 2 Suspension System provides a significant performance upgrade for HOSS 1.0 equipped Broncos, increasing wheel travel and ride quality across varied terrain. This system utilizes front and rear 2.5 EXP Series coilovers, which combine the damping capacity of a 2.5-inch diameter rebuildable shock with the cost-efficiency of reusing factory coil springs. Snap-ring grooves machined into the hard-anodized aluminum shock bodies allow for adjustable ride heights, offering 1.375–3” of front lift and 1.5–2.25” of rear lift.

To correct suspension geometry at these increased lift heights, this kit includes tubular Upper Control Arms (UCAs) featuring ICON’s patented Delta Joint Pro. These joints provide up to 90 degrees of total articulation, ensuring maximum durability and range of motion without the binding common in standard joints. The 100% bolt-on design requires no cutting or welding, making it a straightforward upgrade for enthusiasts seeking better vehicle control and longevity.

• Complete set of (4) 2.5 Aluminum Series EXP Shocks with internal reservoirs
• One-piece, impact-extruded, hard-anodized 6061 aluminum cylinders for corrosion resistance
• Tubular UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• 7/8” diameter induction-hardened, chrome-plated shafts in an inverted design
• PTFE-lined spherical bearings for reduced deflection and extended service life
• CNC-machined aluminum components with black anodized finish
• Adjustable ride heights via snap-ring grooves
• Fully rebuildable and re-tunable internal components
• Utilizes factory OE coil springs and hardware

Fits 2003-2009 Lexus GX470 Base. This Stage 3 suspension system is engineered to increase wheel travel, improve suspension geometry, and replace the factory rear air bags with a reliable coil spring setup.

The front suspension features vehicle-specific tuned 2.5-inch extended travel coilover shocks with internal reservoirs. These coilovers are height-adjustable from 0 to 3.5 inches of lift, providing clearance for larger wheel and tire combinations. They are paired with tubular steel upper control arms featuring ICON's patented Delta Joint, which provides the performance of a uniball with the durability and weather resistance of a traditional ball joint. In the rear, the system includes 2-inch lift coil springs and a conversion kit to eliminate the OE air bag system. Damping is handled by 2.0 Aluminum Series internal reservoir shocks, while tubular rear lower links provide increased strength over stock units and allow for precise pinion angle adjustment.

• Adjustable lift height from 0-3.5" over stock
• Patented Delta Joint (U.S. Pat. 10,731,700) for high-angle articulation and longevity
• 2.5" CAD plated coilover bodies with 7/8" shafts and FK Rod End bearings
• 2.0 Aluminum Series rear shocks with 5/8" shafts
• Tubular rear lower links with multi-durometer bushings for improved roll steer geometry
• Includes rear coil spring conversion kit to delete factory air suspension
• 6061 CNC machined aluminum components
• 100% bolt-on installation; no cutting or welding required

Fits 2021-2023 Ford Bronco 4-door models equipped with the Sasquatch Package.

The ICON Vehicle Dynamics Stage 3 Suspension System is engineered to maximize wheel travel and ride quality for the current-generation Ford Bronco. This system utilizes precision-manufactured, custom-valved internal reservoir coilover shocks that provide an adjustable front lift height of 2-3 inches and 1.25-2.25 inches in the rear. To manage the increased lift and suspension geometry, this kit includes CNC-machined 6061 billet aluminum upper control arms (UCAs). These arms allow for on-vehicle caster and camber adjustment and feature the patented Delta Joint PRO, which provides up to 90 degrees of articulation for extreme off-road performance.

In the rear, the system uses shaft-up oriented shocks paired with triple-rate coil springs to achieve consistent damping and superior travel. The shock bodies are CAD plated for corrosion resistance and feature heavy-duty 7/8-inch diameter shafts. This 100% bolt-on system requires no cutting or welding, making it a direct upgrade for factory suspension components.

• Fits 2021-2023 Ford Bronco Sasquatch 4-Door
• Provides up to 11.5" front and 14" rear wheel travel with 35" tires
• CNC machined 6061 aircraft-grade aluminum UCAs and components
• Patented Delta Joint PRO for 90 degrees of articulation
• CAD plated coilover bodies with 7/8" shafts and PTFE-lined spherical bearings
• Triple-rate rear coil spring design for optimized ride quality
• High-strength alloy CNC machined lower bar pins
• Adjustable ride height: 2-3" front lift / 1.25-2.25" rear lift

Fits 2021-2023 Ford Bronco 4-door non-Sasquatch models (Badlands, Base, Big Bend, Black Diamond, Everglades, and Outer Banks).

The ICON Vehicle Dynamics Stage 3 Suspension System provides a significant performance upgrade for 2021-2023 Ford Bronco owners looking to maximize wheel travel and ride quality. This system features precision-valved, internal reservoir coilover shocks that allow for adjustable ride heights of 3-4 inches in the front and 2-3 inches in the rear over stock non-Sasquatch dimensions. The rear shocks utilize a shaft-up orientation paired with triple-rate coil springs to deliver superior damping and 14 inches of rear wheel travel.

To correct suspension geometry at increased lift heights, this Stage 3 kit includes tubular Upper Control Arms (UCAs) equipped with ICON’s patented Delta Joint PRO. This heavy-duty ball joint provides up to 90 degrees of articulation, ensuring bind-free movement and improved caster for better high-speed stability. The system is designed as a 100% bolt-on solution, requiring no drilling or cutting for installation.

• Adjustable 3-4" front lift and 2-3" rear lift height
• Tubular UCAs with patented Delta Joint PRO (90-degree articulation)
• Internal reservoir coilovers with corrosion-resistant CAD plated bodies
• Triple-rate rear coil springs for optimized ride quality
• Up to 11.5" front and 14" rear wheel travel with 35" tires
• 7/8” diameter induction hardened, chrome plated shock shafts
• 6061 CNC machined aluminum components and high-strength alloy lower bar pins
• PTFE-lined spherical bearings and application-specific mounting hardware
• Accommodates 35" tires (requires factory crash bar removal); fits 37" tires with optional up-travel limiters
• Manufacturer Part Number: K53193T

Fits select 2010-2023 Lexus GX460, 2010-2024 Toyota 4Runner, and 2010-2014 Toyota FJ Cruiser.

The ICON Stage 3 Suspension System is engineered to transform your vehicle's off-road capability and on-road manners by replacing restrictive factory components with race-inspired hardware. This system centers around vehicle-specific tuned 2.5-inch front coilovers with internal reservoirs, providing 0-3.5 inches of lift height to accommodate larger, more aggressive wheel and tire packages. By pairing these with ICON billet aluminum upper control arms featuring the patented Delta Joint, you gain significantly more wheel travel and the ability to fine-tune front-end alignment directly on the vehicle.

In the rear, ICON pairs 2-inch lift coil springs with 2.0 Aluminum Series IFP shocks to balance the damping performance of the front end. To improve articulation and strength, this kit includes CNC-machined 6061 billet aluminum lower links and an adjustable rear track bar, ensuring proper pinion angle and KDSS compatibility. The bolt-on design ensures a straightforward installation without the need for cutting or welding.

• Adjustable front coilovers provide 0-3.5" of lift height
• Billet aluminum Delta Joint upper control arms improve geometry and travel
• 2.5" front shock bodies with 7/8" shafts and CAD plating for corrosion resistance
• 2.0 Aluminum Series rear IFP shocks with 5/8" shafts
• 6061 aircraft-grade aluminum CNC-machined components
• Billet rear lower links offer on-vehicle pinion angle adjustment
• Adjustable rear track bar for alignment correction and KDSS compatibility
• FK Rod End bearings for maximum longevity and minimal deflection
• Complete bolt-on system; no welding or cutting required

Fits select 2011-2026 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks equipped with 0-1.5 inches of rear lift.

The ICON Vehicle Specific (V.S.) 2.0 HD Series shock absorbers are engineered to provide heavy-duty damping performance for both daily driving and off-road use. Designed specifically for the demands of 3/4-ton and 1-ton GM trucks, these shocks feature a remote reservoir that significantly increases oil volume and surface area for heat dissipation, preventing oil cavitation and shock fade during sustained hard use. The HD series is distinguished by its hard-anodized 6061 aluminum cylinders featuring increased wall thickness and taller DU bearings, which provide superior resistance to side-load and pull-apart forces compared to standard 2.0 aluminum series shocks.

Internally, a linear/digressive piston design ensures precise valving for controlled handling on the pavement and compliant travel on the trail. Each shock is fully rebuildable and revalveable, ensuring a long service life and the ability to tune the suspension to your specific load requirements.

• Fits passenger side rear application for 0-1.5" lift heights
• Remote reservoir design for maximum heat dissipation and oil volume
• Increased cylinder wall thickness for improved structural integrity
• Taller DU bearings enhance side-load strength
• 5/8-inch chrome-plated hardened steel shaft resists corrosion and pitting
• Nitrogen-charged monotube design with 5WT premium shock oil
• Hard-anodized 6061 aluminum body for corrosion resistance and heat management
• Polyurethane bushings and zinc-plated sleeves for an OE-style fit
• Nitrile rubber top-out bumper for quiet operation
• Fully rebuildable and revalveable design

Fits 2022-2025 Toyota Tundra and 2025 Toyota Sequoia (1794 Edition, Limited, Platinum, SR, SR5).

The ICON Vehicle Dynamics Stage 2 Suspension System provides a complete lifting and leveling solution for the latest generation Tundra and Sequoia. This system is centered around 2.5 EXP Series front coilover shocks, which utilize the factory coil springs and hardware while providing 0-3 inches of adjustable front lift via a snap-ring system. To maintain proper alignment and maximize suspension travel at increased ride heights, the kit includes CNC-machined billet aluminum upper control arms (UCAs). These arms feature the patented Delta Joint Pro, providing 90 degrees of total articulation and allowing for on-vehicle caster and camber adjustment.

The rear is equipped with 2.0 Aluminum Series nitrogen-charged monotube shocks, specifically tuned to complement the front EXP coilovers for balanced damping performance. This 100% bolt-on system requires no drilling, cutting, or welding and provides enough clearance to run up to 35-inch tires.

• Adjustable 0-3 inch front lift height for leveling and tire clearance
• CNC-machined billet aluminum UCAs for increased strength and alignment correction
• Delta Joint Pro (U.S. Pat. 10,731,700) with 90 degrees of articulation
• 2.5 EXP Series front shocks with internal reservoirs
• 2.0 Aluminum Series rear shocks with nitrogen-charged monotube design
• Includes sway bar drop brackets to maintain proper OE link geometry
• All shock absorbers are fully rebuildable and re-tunable
• Bolt-on installation with no permanent vehicle modifications required

Fits 2021-2023 Ford Bronco 4-door models without the Sasquatch Package (Base, Big Bend, Black Diamond, Outer Banks, Badlands, and Everglades).

The ICON Vehicle Dynamics Stage 3 Suspension System is a comprehensive bolt-on upgrade designed to maximize wheel travel and damping performance for non-Sasquatch Broncos. This system yields 3-4" of front lift and 2-3" of rear lift, providing the clearance needed for 35" tires while significantly improving off-road articulation. The kit features custom-valved internal reservoir coilovers with CAD-plated shock bodies and 7/8" shafts for superior heat dissipation and durability.

To correct suspension geometry at increased lift heights, this Stage 3 kit includes CNC-machined 6061 billet aluminum upper control arms (UCAs). These arms feature ICON's patented Delta Joint PRO, which provides up to 90 degrees of movement for bind-free suspension cycling and allows for on-vehicle caster and camber adjustments. The rear is equipped with triple-rate coil springs and shaft-up shocks to achieve a class-leading 14" of travel.

• Adjustable 3-4" front lift and 2-3" rear lift over stock non-Sasquatch heights
• CNC-machined 6061 billet aluminum UCAs with on-vehicle alignment adjustment
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• Internal reservoir coilovers with corrosion-resistant CAD plating and 7/8" shafts
• Triple-rate rear coil springs for optimized ride quality and 14" of travel
• PTFE-lined spherical bearings and high-strength alloy CNC-machined lower bar pins
• 100% bolt-on installation; no drilling, cutting, or welding required
• Accommodates 35x12.50 tires (37" tires supported with optional up-travel limiters)

Fits 2011-2026 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models with 0-1.5 inches of rear lift.

ICON Vehicle Specific (V.S.) 2.0 HD Series shock absorbers are engineered to handle the increased demands of heavy-duty trucks. Built with hard-anodized 6061 aluminum cylinders featuring increased wall thickness and taller DU bearings, these shocks provide significantly higher pull-apart and side-load strength than standard 2.0 Aluminum Series models. The nitrogen-charged monotube design with an internal reservoir (IR) ensures consistent damping performance during heavy towing or off-road use, while the vehicle-specific valving optimizes ride quality for the daily driver.

• Hard-anodized 6061 aluminum body for superior heat dissipation and corrosion resistance
• 5/8-inch chrome-plated hardened steel shaft resists pitting and corrosion
• Internal nitrogen reservoir with monotube design for consistent damping
• Vehicle-specific linear/digressive valving for controlled ride quality on and off-road
• Premium 5WT shock oil maintains consistency across a wide temperature range
• Polyurethane bushings and zinc-plated sleeves for direct OE-style fitment
• Nitrile rubber top-out bumper for quiet, noise-free operation
• 100% rebuildable and revalveable design

Fits 2007-2018 Jeep Wrangler JK and 1999-2004 Jeep Grand Cherokee.

The ICON Dynatrac HD Balljoint Set is engineered to address the inherent weaknesses of factory ball joints, which often fail prematurely when subjected to the stress of larger off-road tires and increased suspension travel. These heavy-duty replacements provide a significant upgrade in strength and durability for your Jeep's front axle, ensuring consistent steering feel and precise alignment even in demanding terrain.

• High-strength construction designed for heavy-duty off-road use
• Rebuildable design allows for long-term serviceability without complete replacement
• Direct fitment into factory axle housings for a straightforward installation
• Reduces steering play and improves front-end stability
• Fits 2007-2018 Jeep Wrangler JK and 1999-2004 Jeep Grand Cherokee WJ

Fits 2017-2024 Ford Raptor. This ICON RXT Add-In Leaf is engineered to work in conjunction with the ICON RXT Multi-Rate Leaf Spring system, providing an additional layer of tuning for the rear suspension. It allows owners to increase the spring rate to better support heavy constant loads such as chase racks, bed cages, or full-size spare tires without compromising the progressive feel of the RXT pack.

• Designed specifically for use with ICON RXT Multi-Rate Leaf Spring kits
• Increases rear spring rate for improved load-carrying capacity
• Helps maintain ride height on Raptors equipped with heavy bed accessories
• Precision-manufactured for consistent spring rate and long-term durability

Fits 2021-2023 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, and Outer Banks).

This ICON Stage 3 suspension system is engineered to significantly increase wheel travel and damping performance for the 2021-2023 Ford Bronco. The kit features ICON 2.5 Series internal reservoir front and rear coilovers, providing up to 3-4" of front lift and 2-3" of rear lift over stock 4-door non-Sasquatch models. To maintain proper suspension geometry and maximize articulation, this kit includes 6061 billet aluminum upper control arms (UCAs) equipped with the patented Delta Joint PRO, allowing for 90 degrees of total movement and convenient on-vehicle caster/camber adjustment.

The rear coilovers utilize a shaft-up orientation and vehicle-specific dual-rate coil springs designed to handle additional gear weight while maintaining a refined ride both on and off the trail. All components are a 100% bolt-on solution, requiring no cutting, drilling, or welding for installation.

• ICON 2.5 Series front and rear coilovers with CAD plated bodies and 7/8" diameter shafts
• Billet aluminum UCAs with patented Delta Joint PRO (U.S. Pat. 10,731,700) for 90-degree articulation
• Up to 11.5" front and 14" rear wheel travel with 35" tire fitment
• PTFE-lined spherical bearings and CNC machined 6061 aircraft grade aluminum components
• Dual-rate rear springs for improved load capacity and off-road control
• High-strength alloy CNC machined lower bar pins

Fits 2011-2026 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD (0-3.5" Lift).

The ICON V.S. 2.0 HD Series remote reservoir shock is engineered specifically for heavy-duty GM trucks that require consistent damping under load. Designed to bridge the gap between street comfort and off-road performance, the 2.0 HD series features a thicker-walled 6061 aluminum cylinder and taller DU bearings than standard ICON 2.0 Aluminum Series shocks. This reinforced architecture provides superior resistance to side-load forces and increased pull-apart strength during aggressive cycling.

The remote reservoir configuration significantly increases oil volume and heat dissipation surface area, effectively preventing damper fade and cavitation during prolonged use in rough terrain. With a vehicle-specific linear/digressive piston design, these shocks provide precise handling on the pavement while smoothing out washboard roads and trail obstacles. This passenger-side front shock includes a forged aluminum lower clevis and a bonded rubber upper bushing to maintain factory-style fitment while isolating road vibration.

• Hard-anodized 6061 aluminum body for superior heat dissipation and corrosion resistance.
• Increased cylinder wall thickness and taller DU bearings for heavy-duty durability.
• Press-in, bonded rubber bushing and bar pin assembly damps road vibration.
• Forged aluminum lower mounting clevis ensures maximum strength at the suspension interface.
• 5/8-inch chrome-plated hardened steel shaft resists pitting and corrosion.
• Nitrogen-charged monotube design with premium 5WT shock oil for consistent damping across temperatures.
• 100% rebuildable and revalveable for long-term serviceability.

Fits 2023-2025 Chevrolet Colorado and GMC Canyon models.

Shield your truck's vulnerable front differential from rocks, stumps, and trail debris with this heavy-duty ICON Front Differential Skid Plate. Designed specifically for the redesigned mid-size GM platform, this skid plate provides essential underbody protection for off-roaders navigating technical terrain where the factory differential housing is most at risk of impact damage.

• Protects the front differential from direct impacts and trail obstacles
• Engineered for high-clearance protection without sacrificing ground clearance
• Constructed for maximum durability during off-road use
• Direct bolt-on design for a straightforward installation
• Designed to work alongside ICON suspension systems and components

Fits select 2021-2023 Ford Bronco Base, Big Bend, Black Diamond, and Outer Banks models equipped with the HOSS 1.0 package.

The ICON Vehicle Dynamics Stage 1 Suspension System provides a technical performance upgrade for the Ford Bronco, increasing wheel travel and damping control while retaining the factory coil springs. This system centers around four 2.5 EXP Series coilovers, which feature one-piece impact-extruded 6061 aluminum bodies for superior heat dissipation and corrosion resistance. By utilizing the Bronco's original coil springs and hardware, this kit offers a cost-effective path to a 2.5-inch diameter premium shock absorber without sacrificing ride quality.

Ride height is easily tuned via a series of snap-ring grooves machined into the shock bodies. This design allows for 1.375-3” of front lift and 1.5-2.25" of rear lift over stock, letting you level the vehicle's stance or accommodate larger tires. The inverted shaft-up design protects the 7/8” induction-hardened, chrome-plated shafts from debris, while PTFE-lined spherical bearings ensure minimal deflection and long-term durability on and off-road.

• Vehicle-specific tuning for the HOSS 1.0 Suspension Package
• Selective lift heights: 1.375-3” (Front) and 1.5-2.25" (Rear) over stock
• Hard-anodized 2.5-inch aluminum shock cylinders for consistent finish and durability
• 7/8” diameter induction-hardened, chrome-plated shafts
• Inverted shaft design reduces unsprung weight
• PTFE-lined spherical bearings for extended service life
• 100% Bolt-on installation requires no cutting or welding
• Fully rebuildable and re-tunable internal components
• Kit includes a full set of (4) 2.5 Aluminum Series EXP Shocks with internal reservoirs

Fits 2021-2023 Ford Bronco models equipped with the factory HOSS 2.0 suspension package.

The ICON Vehicle Dynamics Stage 2 Suspension System provides a significant performance increase for the 2021-2023 Ford Bronco by combining 2.5 EXP Series coilovers with billet aluminum upper control arms (UCAs). The 2.5 EXP coilovers offer the damping capacity and cooling of a premium 2.5-inch diameter rebuildable shock while utilizing the factory coil springs for a cost-effective performance upgrade. This system allows for adjustable ride heights via integrated snap-ring grooves, providing 0-2” of front lift and 0-1.75” of rear lift over stock.

The included billet 6061 aluminum UCAs are engineered for added strength and feature the patented Delta Joint Pro, which allows for 90 degrees of total articulation. These arms provide essential on-vehicle caster and camber adjustment to correct suspension geometry and optimize drivability after lifting. Built with impact-extruded, hard-anodized aluminum cylinders and 7/8” induction-hardened shafts, this kit is designed for superior vehicle control and longevity in harsh off-road environments.

• Front lift height: 0-2” (adjustable via snap-ring grooves)
• Rear lift height: 0-1.75” (adjustable via snap-ring grooves)
• Billet 6061 aluminum UCAs with black anodized finish
• Patented Delta Joint Pro (U.S. Pat. 10,731,700) for maximum articulation
• 2.5-inch diameter hard-anodized aluminum shock bodies
• 7/8-inch diameter induction-hardened, chrome-plated shafts
• PTFE-lined spherical bearings for minimal deflection
• 100% bolt-on installation; utilizes factory coils and hardware
• Fully rebuildable and re-tunable internal reservoir shocks

Fits 2023-2025 Chevrolet Colorado and GMC Canyon.

Shield your drivetrain from costly trail damage with the ICON Vehicle Dynamics Transmission Skid Plate. Designed specifically for the latest generation Colorado and Canyon chassis, this skid plate provides essential underbody protection for the transmission pan and sensitive drivetrain components. Whether you are navigating technical rock gardens or clearing brush on the trail, this armor prevents impacts from compromising your vehicle's mobility.

• Precision-engineered for 2023-2025 Chevrolet Colorado and GMC Canyon models
• Provides a rugged barrier against rocks, stumps, and off-road debris
• Strategic design maintains maximum ground clearance for off-road performance
• Direct bolt-on installation utilizing factory mounting points for a secure fit
• Essential protection for overlanding and heavy trail use

Fits 2021-2023 Ford Bronco models, including Badlands, Base, Big Bend, Black Diamond, Everglades, and Outer Banks.

This ICON Stage 3 suspension system provides a comprehensive performance upgrade for the Ford Bronco, combining adjustable 2.5 Series coilovers with high-strength tubular upper control arms. To accommodate the increased suspension travel and lift height, the included UCAs feature the patented Delta Joint PRO, which offers up to 90 degrees of articulation for bind-free movement and corrected caster for improved alignment and drivability.

The rear coilovers utilize ICON-engineered progressive dual-rate coil springs, specifically designed to handle the extra weight capacity needed for gear-heavy builds while maintaining superior damping on and off-road. Built for durability in harsh environments, the coilovers feature CAD-plated shock bodies with heavy-duty 7/8-inch shafts and 6061 aircraft-grade aluminum CNC-machined components. This system is a 100% bolt-on solution with no drilling, cutting, or welding required.

• Adjustable lift height: 3-4" front / 2-3" rear over non-Sasquatch models
• Up to 11.5" front and 14" rear wheel travel with 35" tire fitment
• Patented Delta Joint PRO (U.S. Pat. 10,731,700) for 90 degrees of total articulation
• Corrosion-resistant CAD plated coilover bodies with 7/8" diameter shafts
• Vehicle-specific tuned internal reservoirs for superior damping and vehicle control
• 6061 Aircraft grade aluminum CNC machined components
• PTFE lined spherical bearings and application-specific mounting hardware
• 100% Bolt-on installation for a seamless fit

Fits 2011-2026 Chevrolet and GMC 2500/3500 HD trucks with 0-3.5 inches of front suspension lift.

ICON Vehicle Specific (V.S.) 2.0 HD Series shock absorbers are engineered to handle the increased stresses of heavy-duty truck applications. These shocks feature 6061 aluminum cylinders with increased wall thickness and taller DU bearings, providing superior pull-apart and side-load strength compared to standard 2.0 Aluminum Series shocks. The hard-anodized finish ensures excellent corrosion resistance and optimal heat dissipation during hard use.

Designed for consistent performance on and off-road, these nitrogen-charged monotube shocks utilize a one-piece linear/digressive piston for precise vehicle-specific valving. The internal reservoir design maintains damping consistency, while the 5/8-inch chrome-plated hardened steel shaft resists pitting and damage. For ease of installation, the shocks include a bonded rubber upper bushing/bar pin assembly to isolate road vibration and a forged aluminum lower clevis for maximum mounting strength. Like all ICON V.S. shocks, the 2.0 HD series is 100% rebuildable and revalveable.

• Hard-anodized 6061 aluminum shock body for superior heat management
• 5/8-inch chrome-plated hardened steel shaft
• Increased cylinder wall thickness for improved HD durability
• Premium 5WT shock oil for consistent damping across wide temperature ranges
• Nitrogen-charged monotube design with internal reservoir
• Nitrile rubber top-out bumper for quiet operation
• Forged aluminum lower mounting clevis for factory-like fitment
• 100% rebuildable and revalveable

Fits select 2011-2026 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD (0-3.5in Lift).

The ICON Vehicle Specific (V.S.) 2.0 HD Series remote reservoir shock absorber is engineered for heavy-duty applications that demand increased durability without sacrificing ride quality. Tailored for the everyday driver and weekend adventurer, the 2.0 HD series features hard-anodized 6061 aluminum cylinders with increased wall thickness and taller DU bearings. These enhancements significantly improve pull-apart and side-load strength compared to standard 2.0 Aluminum Series shocks.

Equipped with an external remote reservoir, this shock greatly increases oil volume and heat dissipation surface area. This design prevents overheating and cavitation during hard use, ensuring consistent damping performance without fade. The monotube design is nitrogen-charged and features a 5/8-inch chrome-plated hardened steel shaft to resist corrosion and pitting.

• One-piece linear/digressive piston design for vehicle-specific valving and optimal performance
• Remote reservoir design maximizes oil capacity and resists damper fade
• Hard-anodized 6061 aluminum body for heat dissipation and corrosion resistance
• Press-in, bonded rubber upper bushing and bar pin assembly isolates road vibration
• Forged aluminum lower mounting clevis for maximum strength
• Premium grade 5WT shock oil for consistent performance across temperature ranges
• Nitrile rubber top-out bumper for quiet operation
• 100% rebuildable and revalveable design
• 5/8-inch chrome-plated hardened steel shaft

Fits 2011-2026 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD with 0-3.5" of front lift over stock.

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are engineered to provide heavy-duty GM trucks with superior off-road damping and a controlled street ride. These remote reservoir shocks feature ICON's Compression Damping Control Valve (CDCV) technology, offering 10 distinct levels of high-resolution adjustability. This allows drivers to tune the suspension for everything from heavy towing to high-speed desert transit with the simple turn of a knob.

Built with hard-anodized, impact-extruded aluminum cylinders, these shocks offer exceptional heat dissipation and corrosion resistance. An internal "Bump Zone" manifold provides an additional 20% of damping force at the end of the stroke to prevent harsh bottom-outs. These shocks are extended-travel length and require aftermarket front upper control arms for proper clearance and maximum wheel travel.

• Fits 2011-2026 GM 2500/3500 HD models
• Adjustable CDCV for 10 levels of compression tuning
• 2.5-inch diameter hard-anodized aluminum shock bodies
• 7/8" induction-hardened, chrome-plated shock shafts
• Remote reservoir for increased oil volume and heat dissipation
• 6061 billet aluminum CNC-machined components
• Internal Bump Zone for increased end-of-stroke bottom-out control
• One-piece digressive piston design for vehicle-specific valving
• 100% rebuildable and revalveable design
• Premium 5WT shock oil for consistent performance across temperatures
• Bonded rubber bushing and bar pin assembly to damp road vibration