Fits 2019-2023 Ford Ranger XL, XLT, and Lariat models (2WD/4WD) with 0-1.5 inches of rear lift.

The ICON Vehicle Specific (V.S.) 2.0 Aluminum Series remote reservoir shocks are engineered to provide a significant upgrade in damping performance and heat dissipation for the 2019-2023 Ford Ranger. These nitrogen-charged monotube shocks feature a remote reservoir that increases oil capacity, preventing shock fade during extended use on washboard roads or technical trails. The linear/digressive piston design is valved specifically for the Ranger chassis, offering a controlled street ride while maintaining the bottom-out resistance needed for off-road excursions.

Constructed with 6063 clear-anodized aluminum bodies, these shocks are built to resist corrosion and dissipate heat faster than traditional steel-body shocks. The 5/8-inch chrome-plated hardened steel shafts and nitrile rubber top-out bumpers ensure long-term durability. For ease of maintenance, these units are 100% rebuildable and revalveable, making them a sustainable long-term suspension solution.

• 6063 anodized aluminum body and reservoir for superior heat dissipation
• Remote reservoir design for consistent damping under hard use
• 5/8-inch chrome-plated hardened steel shaft resists pitting and corrosion
• One-piece digressive piston design for vehicle-specific valving
• Premium 5WT shock oil for consistent performance across temperature ranges
• Polyurethane bushings and zinc-plated sleeves for OE-style fitment
• Nitrogen charged monotube design
• Manufacturer Part Number: 96519R

The ICON Vehicle Dynamics Nipple Greasing Adapter Kit (MPN 191013) is a specialized maintenance tool designed to facilitate the proper lubrication of recessed or difficult-to-access grease fittings. This kit is essential for servicing suspension components such as rod ends and control arm bushings where a standard grease gun coupler may struggle to form a secure seal.

By providing a precision interface for grease nipples (zerks), this adapter ensures that lubricant is delivered directly into the bearing or bushing surface rather than leaking around the fitting. Regular maintenance using this kit helps prevent premature wear and extends the service life of your high-performance suspension system.

• Provides a secure connection to recessed or specialized grease zerks
• Compatible with most standard grease gun hoses and equipment
• Ensures efficient lubrication of suspension pivot points and bearings
• Manufacturer Part Number: 191013

Fits 1995-2004 Toyota Tacoma Base, DLX, Limited, Pre Runner, and SR5 models.

The ICON Vehicle Dynamics Stage 5 Suspension System is engineered for the serious driver demanding maximum wheel travel and damping performance. This comprehensive kit features vehicle-specific tuned 2.5 Series front coilovers equipped with remote reservoirs and CDC (Compression Damping Control) Valves. The easy-to-adjust CDC Valve offers 10 distinct settings to fine-tune your ride for varying terrain or cargo loads. These coilovers are height-adjustable from 0-3 inches, providing clearance for larger wheel and tire packages.

For superior front-end strength and geometry, this system includes ICON billet 6061 aircraft-grade aluminum upper control arms (UCAs). These UCAs feature the patented Delta Joint, a high-angle, serviceable ball joint that combines the durability of a ball joint with the performance of a uniball. In the rear, an Add-A-Leaf kit replaces the factory overload leaves to provide 1.5 inches of lift and a 10% softer spring rate for improved compliance, paired with 2.0 Aluminum Series remote reservoir shocks for balanced damping.

• Manufacturer Part Number: K53015B
• 0-3" adjustable front lift height
• 2.5 Series front coilovers with 7/8" shafts and CAD plated bodies
• CDC Valve allows for 10 settings of compression damping adjustment
• Billet 6061 aluminum UCAs with on-vehicle caster/camber adjustment
• Patented Delta Joint (U.S. Pat. 10,731,700) for maximum travel without binding
• 2.0 Aluminum Series rear shocks with 5/8" shafts and remote reservoirs
• FK Rod End bearings for reduced deflection and increased longevity
• Rear Add-A-Leaf kit provides 1.5" of lift and improved ride quality

Fits 2007-2021 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail, and Nightshade).

The ICON RXT Rear 2.5 Series VS RR CDCV Shocks are engineered for Tundra owners demanding high-end off-road performance without sacrificing street drivability. These vehicle-specific shocks utilize one-piece impact-extruded aluminum cylinders for superior corrosion resistance and heat dissipation compared to traditional steel bodies. The remote reservoir design increases oil capacity to significantly reduce shock fade during sustained high-speed off-road use.

Precision tuning is handled by ICON’s CDC (Compression Damping Control) Valve, providing 10 distinct levels of high-resolution adjustability via an external knob. Additionally, an internal manifold creates a "Bump Zone" in the final inches of travel, providing 20% more damping force to prevent harsh bottom-out conditions. These 2.5 Series shocks are fully rebuildable and revalveable, ensuring long-term serviceability for the life of the vehicle.

• CDC Valve technology with 10 external compression damping settings
• Internal "Bump Zone" provides 20% more damping at full compression
• One-piece impact-extruded 6061 aluminum cylinders for weight reduction and cooling
• 7/8-inch induction-hardened, chrome-plated shock shafts
• Remote reservoir for improved heat dissipation and consistent performance
• One-piece digressive piston design for superior ride quality
• PTFE-lined spherical bearings and application-specific mounting hardware
• Premium 5WT shock oil for consistent damping across wide temperature ranges
• Nitrogen-charged monotube design with 6061 CNC machined components
• Manufacturer Part Number: 57823CP

Fits select 1995-2024 Chevrolet Silverado 1500, GMC Sierra 1500, Ford Bronco, Nissan Titan, and Toyota 4Runner, Tacoma, and Tundra models.

The ICON Alloys Rebound PRO is engineered to bridge the gap between street legal safety and off-road performance. Utilizing patented InnerLock technology (U.S. Patent No. 11,090,976), this wheel provides an innovative bead retention system that is lighter than a traditional beadlock while remaining fully DOT compliant. By using hardened, thermochemically treated alloy pins to secure the tire bead, it offers the security needed for low-pressure rock crawling without the maintenance or weight penalties of a standard beadlock ring.

Constructed from high-strength aluminum alloy, the Rebound PRO features a 0mm offset and 4.75-inch backspacing strategically developed to reduce scrub radius and maximize caliper clearance. This results in improved steering feedback and optimized suspension travel for modern trucks and SUVs.

• MPN: 21817858347TT
• Dimensions: 17x8.5 Size, 6x5.5 Bolt Pattern, 0mm Offset, 4.75in Backspacing, 106.1mm Bore
• InnerLock Technology: Patented bead retention system for off-road security and on-road safety
• Construction: High-strength aluminum alloy with a 3,200 lb load rating
• Hardware: Hardened bead retention pins with SAE J1926 O-ring seals for extreme corrosion resistance
• Compliance: Engineered for DOT compliance and compatible with standard tire mounting tools
• Performance: Reduced unsprung weight compared to traditional beadlocks for better vehicle dynamics

Fits select 2009-2024 Dodge Ram 1500 and Ram 1500 Classic models.

The ICON Alloys Rebound combines a sharp, concave spoke design with "ICON-optimized" dimensions to enhance both the form and function of your truck. This wheel is engineered to maximize brake caliper clearance and optimize wheel position for unhindered suspension travel and steering function. By strategically developing the 4.75-inch backspace and 0mm offset, ICON reduces the scrub radius, which improves overall handling and ride quality on and off the road.

Constructed from high-strength aluminum alloy, the Rebound is built to withstand off-road abuse while reducing unsprung weight and rotating mass. This reduction in weight helps improve vehicle dynamics and tire clearance, making it an ideal choice for owners running oversized tires or upgraded suspension systems.

• Model: Rebound
• Size: 17x8.5
• Bolt Pattern: 5x5.5 (5x139.7)
• Offset: 0mm
• Backspace: 4.75in
• Finish: Satin Black
• Bore: Optimized for application-specific fitment
• Manufacturer Part Number: 1817858547SB

Fits 1996-2002 Toyota 4Runner (Base, SR5, Limited).

The ICON Vehicle Dynamics Stage 2 suspension system for the 3rd Gen 4Runner is engineered to provide superior damping and control for both daily driving and technical off-road use. This comprehensive system features 2.5 VS Series coilovers that are height-adjustable from 0-3 inches, allowing for larger tire fitment and corrected vehicle stance. These front coilovers utilize CAD-plated shock bodies with 7/8-inch shafts and FK Rod End bearings for maximum durability. In the rear, 2.0 Aluminum Series shocks work in tandem with ICON-engineered 1-inch lift coil springs to manage body roll and improve load handling without sacrificing ride quality.

A key upgrade in this Stage 2 kit is the ICON billet aluminum upper control arm (UCA) set. These CNC-machined 6061 aircraft-grade aluminum arms allow for on-vehicle caster and camber adjustment, ensuring proper front-end geometry after lifting. The UCAs feature the serviceable ICON Delta Joint, which combines the durability of a ball joint with the performance of a traditional uniball, allowing for full suspension travel without binding.

• Fits 1996-2002 Toyota 4Runner (Base, Limited, SR5)
• Front coilovers adjustable from 0-3" of lift height
• Billet 6061 aluminum UCAs with Delta Joints for improved geometry
• 2.5 VS Series front coilovers with 7/8" shafts and CAD plating
• 2.0 Aluminum Series rear shocks with vehicle-specific valving
• Includes ICON 1" lift rear coil springs
• CNC-machined components and FK Rod End bearings
• Fully rebuildable and re-valvable shock absorbers
• MPN: K53132B

Fits 1995-2004 Toyota Tacoma 4WD and PreRunner models (Base, DLX, Limited, SR5).

The ICON Vehicle Dynamics Stage 4 suspension system is engineered for the serious driver demanding maximum wheel travel and damping ability. This comprehensive kit features vehicle-specific tuned 2.5 Series front coilovers with remote reservoirs for exceptional cooling during high-speed use. These coilovers are height-adjustable from 0 to 3 inches, providing clearance for larger wheel and tire combinations. For the rear, the system includes 2.0 Aluminum Series remote reservoir shocks and an Add-A-Leaf kit that replaces the factory overload leaves to improve ride compliance while adding 1.5 inches of lift.

To optimize front-end geometry, this system includes ICON billet aluminum upper control arms (UCAs). These UCAs feature the patented Delta Joint, which combines the durability of a ball joint with the performance of a traditional uniball, allowing for full bump and droop travel without binding. Constructed from 6061 aircraft-grade aluminum, the UCAs allow for on-vehicle caster and camber adjustments to ensure proper alignment and drivability.

• ICON 2.5 Series front coilovers with remote reservoirs for superior damping and cooling
• Billet aluminum UCAs with patented Delta Joint (U.S. Pat. 10,731,700) for corrected geometry
• Adjustable front lift height from 0-3.5"
• Corrosion-resistant CAD plated coilover bodies with heavy-duty 7/8" shafts
• 2.0 Aluminum Series remote reservoir rear shocks with 5/8" shafts
• Rear Add-A-Leaf kit provides 1.5" lift and a 10% more compliant spring rate
• CNC machined 6061 aircraft-grade aluminum components
• FK Rod End bearings for maximum longevity and minimal deflection
• Manufacturer Part Number: K53014B

Fits 2009-2010 Dodge Ram 1500, 2011-2018 Ram 1500, and 2019-2022 Ram 1500 Classic 4WD models.

The ICON Stage 4 Suspension System provides a significant performance upgrade for the Ram 1500, delivering increased wheel travel and superior damping control without compromising towing capacity. This system features ICON's patented Delta Joint Upper Control Arms, which bridge the gap between the high articulation of a uniball and the weather-sealed longevity of a ball joint. The Delta Joint's zinc-plated housing and grease seal ensure noise-free operation and protection against the elements, making it ideal for both off-road use and daily driving.

This 100% bolt-on system includes adjustable front coilovers capable of 0.75 to 2.5 inches of lift, featuring CAD-plated bodies and heavy-duty 7/8-inch shafts. The rear is supported by 2.5 Aluminum Series shocks, utilizing one-piece impact-extruded cylinders for exceptional heat dissipation and corrosion resistance. All components are CNC-machined from 6061 aircraft-grade aluminum and utilize FK rod end bearings for maximum durability.

• Fits 2009-2022 Dodge/Ram 1500 4WD (including Classic models)
• Adjustable lift height: 0.75" to 2.5"
• Delta Joint UCAs for high-angle articulation and sealed durability
• 2.5 Aluminum Series rear shocks with impact-extruded cylinders
• Corrosion-resistant CAD plated coilover bodies with 7/8" shafts
• 6061 Aircraft grade aluminum CNC machined components
• FK rod end bearings for minimal deflection and extended life
• 100% Bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K213004

Fits select 2009-2022 Dodge/Ram 1500 and 1500 Classic 4WD models including Laramie, Sport, Big Horn, Rebel, and Tradesman trims.

The ICON Vehicle Dynamics Stage 3 suspension system is designed to significantly improve the wheel travel and damping performance of your Ram 1500. This system features vehicle-specific tuned 2.5-inch coilover shocks equipped with internal reservoirs and ICON-engineered Eibach coil springs. These front coilovers provide 0.75 to 2.5 inches of adjustable lift height, allowing for the installation of larger wheel and tire combinations while maintaining superior ride quality.

Complementing the front coilovers, this kit includes ICON 2.5 Aluminum Series piggyback reservoir rear shocks. These shocks utilize a one-piece impact-extruded aluminum cylinder for maximum corrosion resistance and thermal management. Every component is valved specifically for the Ram 1500 to ensure a balanced feel whether you are on the pavement or in the dirt.

• Manufacturer Part Number: K213003
• Adjustable lift height from 0.75" to 2.5"
• 2.5 Aluminum Series rear shocks with piggyback reservoirs for consistent damping
• CAD plated coilover shock bodies with 7/8" shafts for heavy-duty durability
• 6061 Aircraft-grade aluminum CNC-machined components
• FK rod end bearings for extended longevity and minimal deflection
• 100% Bolt-on system—no drilling, cutting, or welding required for installation
• Maintains factory towing capacity while increasing off-road capability

Fits select 2009-2022 Dodge Ram 1500 and Ram 1500 Classic models (all submodels including TRX, Rebel, and Warlock) with 0-3 inches of rear lift.

ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are engineered to deliver superior off-road damping while maintaining a refined street ride. This piggyback reservoir configuration utilizes a 6061 billet aluminum manifold positioned below the top cap to create an internal "Bump Zone." This specialized zone provides an additional 20% of damping force at the end of the stroke, effectively preventing harsh bottom-outs and maintaining control during high-velocity compression.

Built for longevity and performance, these shocks feature a one-piece digressive piston design and a large 2.5-inch diameter impact-extruded aluminum cylinder for maximum heat dissipation and corrosion resistance. The nitrogen-charged monotube design is paired with premium 5WT shock oil to ensure consistent damping across extreme temperature ranges. As with all ICON V.S. shocks, these are 100% rebuildable and revalveable to ensure a long service life on your vehicle.

• Fits 0-3" of rear lift height
• One-piece digressive piston with vehicle-specific valving
• Internal Bump Zone increases damping by 20% near full compression
• 7/8" diameter induction hardened, chrome plated shock shaft
• 6061 CNC machined aircraft-grade aluminum components
• One-piece impact extruded aluminum cylinders for superior cooling
• Premium grade 5WT shock oil for consistent performance
• PTFE-lined spherical bearings and application-specific mounting hardware
• 100% Rebuildable and revalveable
• Manufacturer Part Number: 217715P

Fits select 1998-2021 Toyota Tundra, Land Cruiser, and Lexus LX470/LX570.

The ICON Alloys Compression wheel is engineered to balance aggressive styling with technical performance. This 17x8.5 wheel features application-specific dimensions including a 5.75-inch backspace and 25mm offset, designed to reduce scrub radius and maximize brake caliper clearance for a more controlled steering feel. Constructed from high-strength aluminum alloy, it delivers a robust 2,750-pound load rating, making it a reliable choice for heavy-duty off-road use.

Beyond durability, the Compression wheel is designed to improve vehicle dynamics by reducing unsprung weight and rotating mass compared to many factory options. This optimizes suspension response and tire clearance for larger off-road rubber.

• Model: Compression
• Size: 17x8.5
• Bolt Pattern: 5x150
• Offset: 25mm
• Backspace: 5.75"
• Bore: 110.1mm
• Finish: Bronze
• Load Rating: 2,750 lbs
• MPN: 2017855557BR

Fits select 2019-2025 Ford Bronco, Ranger, Toyota Tundra, Tacoma, 4Runner, Sequoia, Land Cruiser, and Lexus LX600 and GX550 models.

The ICON Alloys Rebound SLX is engineered to maximize caliper clearance and optimize wheel positioning for unhindered suspension travel and steering function. By strategically developing the 5.75-inch backspace and 25mm offset, ICON has reduced the scrub radius to improve handling and ride quality across both on-road and off-road environments. Constructed from high-strength aluminum alloy, the Rebound SLX features a classic smooth, boltless lip design and is strength-tested to a 3,200 lb load rating, making it one of the most durable wheel options for modern trucks and SUVs.

• Wheel Size: 17x8.5
• Bolt Pattern: 6x5.5
• Offset: 25mm
• Backspacing: 5.75in
• Hub Bore: 95.1mm
• Finish: Satin Black
• Load Rating: 3,200 lbs
• Material: Aluminum Alloy
• Manufacturer Part Number: 1917859057SB

The ICON Vehicle Dynamics Stage 6 suspension system is engineered for the serious 2005-2023 Toyota Tacoma driver seeking maximum off-road performance and ride quality. This comprehensive kit fits all 2005-2015 (0-3.5" lift) and 2016-2023 (0-2.75" lift) Tacoma models, including TRD Pro, TRD Off-Road, and Pre Runner trims.

At the core of this system are vehicle-specific tuned 2.5 Series Extended Travel front coilovers and 2.5 Aluminum Series rear shocks. Both feature remote reservoirs and ICON’s Compression Damping Control Valve (CDCV) technology, providing 10 user-adjustable settings to fine-tune your ride for any terrain. To accommodate the increased travel, ICON includes tubular upper control arms (UCAs) featuring the patented Delta Joint. This serviceable high-angle ball joint corrects front-end geometry and adds necessary caster while eliminating the binding found in factory components.

For the rear, the included Add-A-Leaf kit replaces the factory overload leaves, effectively lowering the spring rate by 10% for a more compliant ride while providing approximately 1.5" of lift. All shock bodies feature a corrosion-resistant CAD plating and heavy-duty 7/8" shafts for long-term durability in harsh environments.

• Fits 2005-2023 Toyota Tacoma (Base, SR, SR5, TRD Sport, TRD Off-Road, TRD Pro, Pre Runner, X-Runner)
• 2.5 Series Extended Travel front coilovers with remote reservoirs and CDCV
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8" shafts
• ICON CDC Valve for 10 levels of compression damping adjustment
• Tubular UCAs with patented Delta Joint (U.S. Pat. 10,731,700) for improved caster and clearance
• Rear Add-A-Leaf kit provides 1.5" lift and replaces OE overload leaf
• 6061 CNC machined aluminum components and FK Rod End bearings
• Manufacturer Part Number: K53006T

Fits select 2022-2025 Toyota Tundra, 2023-2025 Toyota Sequoia, and 2024-2025 Lexus GX550.

The ICON Rear Bump Stop Kit (56112) is a high-performance replacement for the factory rubber stops, engineered to provide a smoother and more controlled bottom-out. Utilizing a progressive micro-cellular poly foam design, this kit absorbs energy more efficiently by providing a compliant initial engagement that ramps up resistance as the suspension reaches full compression. This eliminates the jarring, metal-on-metal feeling of stock rubber stops, making it an essential upgrade for off-road performance and heavy-duty towing applications.

• Progressive micro-cellular poly foam material softens harsh bottom-outs
• CNC laser-cut, precision brake-formed steel brackets with a black powder coat finish
• CNC-machined 6061 aluminum components with a durable black anodized finish
• Simple bolt-on installation with no cutting or welding required
• Compatible with both 2WD and 4WD configurations
• Manufacturer Part Number: 56112

Fits select 2005-2016 Ford F-250 and F-350 Super Duty 4WD models.

The ICON Stage 4 2.5" Suspension System is designed to level your Super Duty while providing a significant upgrade in damping performance and wheel control. This complete system (MPN: K62503) is specifically tuned for the weight and geometry of the 2005-2016 Ford Super Duty platform, making it ideal for everything from highway towing to rough job site terrain. The Stage 4 kit distinguishes itself by including ICON 2.5 Aluminum Series piggyback reservoir shocks for the front and rear, ensuring optimal heat dissipation and consistent damping during heavy use.

• ICON 2.5 Aluminum Series front and rear piggyback reservoir shocks with 7/8" shafts
• ICON 2.0 Aluminum Series dual steering stabilizer kit for enhanced steering control
• ICON-engineered dual rate coil springs (lifetime guarantee against sagging)
• Adjustable track bar with bearing for precise front axle centering
• Application-specific alignment cams to ensure proper caster settings
• 100% bolt-on system requires no drilling, cutting, or welding for installation
• Corrosion-resistant one-piece impact extruded aluminum shock bodies
• Increased wheel travel and reduced body roll compared to stock suspension
• No drive shaft modifications required

Fits 1995-2004 Toyota Tacoma models including Base, DLX, Limited, Pre Runner, S-Runner, and SR5.

The ICON Stage 5 Suspension System is engineered for the 1995-2004 Toyota Tacoma driver demanding maximum damping performance and wheel travel. This system features 2.5 Series front coilovers equipped with remote reservoirs for increased oil volume and heat dissipation, alongside ICON’s CDC (Compression Damping Control) Valve. The CDC Valve provides 10 user-adjustable compression settings, allowing you to fine-tune the ride for varying vehicle loads or terrain conditions. To ensure proper suspension geometry at 0-3" of lift, this kit includes tubular upper control arms (UCAs) featuring the patented Delta Joint, which provides the high-angle performance of a uniball with the weather resistance of a sealed ball joint.

For the rear, ICON utilizes 2.0 Aluminum Series remote reservoir shocks and a specific Add-A-Leaf kit. This leaf replaces the factory overload spring, effectively lowering the rear spring rate by approximately 10% to achieve a more compliant ride while providing 1.5" of rear lift. The entire system is a 100% bolt-on solution designed to improve both on-road stability and off-road capability.

• Front Lift Height: Adjustable from 0-3"
• 2.5 Series Front Coilovers with 7/8" shafts and remote reservoirs
• 10-setting CDC Valve for precise compression damping adjustment
• Tubular UCAs with patented Delta Joint (U.S. Pat. 10,731,700)
• 2.0 Aluminum Series rear shocks with 5/8" shafts and remote reservoirs
• Rear Add-A-Leaf kit for 1.5" lift and improved compliance
• Corrosion-resistant CAD plated coilover bodies and 6061 CNC machined components
• FK Rod End bearings for maximum durability and reduced deflection
• Complete bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K53015

Fits select 2005-2023 Toyota Tacoma models, including Base, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, and TRD Sport.

The ICON Stage 9 suspension system is a comprehensive performance upgrade designed to maximize wheel travel and ride quality. This system features vehicle-specific tuned 2.5 Series Extended Travel front coilovers with remote reservoirs and CDC Valves (CDCV), providing 10 levels of user-adjustable compression damping. The coilovers are height adjustable from 0-3.5" for 2005-2015 models and 0-2.75" for 2016-2023 models, allowing for larger wheel and tire fitments.

Included ICON tubular upper control arms (UCAs) feature the patented Delta Joint, correcting front-end geometry and increasing caster for improved drivability and alignment. For the rear, the RXT multi-rate leaf spring pack offers three user-configurable spring rates to accommodate various payload weights. The rear is paired with 2.5 Aluminum Series remote reservoir shocks featuring a unique side-mount eyelet to increase travel by up to 20% while retaining factory mounting locations.

• CDC Valves (CDCV) provide 10 external settings for compression damping adjustment
• Patented Delta Joint (U.S. Pat. 10,731,700) combines ball joint durability with uniball performance
• RXT Multi-Rate Leaf Springs with 3 adjustable spring rates for varying loads
• 2.5 Series shock bodies with 7/8" shafts and CAD/anodized finishes for corrosion resistance
• CNC machined 6061 aircraft grade aluminum components
• FK Rod End bearings for reduced deflection and increased longevity
• Manufacturer Part Number: K53009T

Fits select 2001-2025 Chevrolet Silverado 2500/3500, GMC Sierra 2500/3500, and Dodge/Ram 2500/3500 heavy-duty trucks.

The ICON Alloys Hulse wheel is engineered specifically for heavy-duty applications, prioritizing caliper clearance and optimized wheel positioning to ensure unhindered suspension travel and steering function. By strategically developing the 5.5-inch backspace and 12mm offset, ICON reduces scrub radius to improve overall handling and ride quality, particularly when paired with ICON Vehicle Dynamics suspension systems.

Constructed from high-strength aluminum alloy, the Hulse features an aggressive concave 12-window profile designed to withstand the rigors of off-road use while reducing unsprung weight and rotating mass. The double black powder coat finish provides a sleek, durable layer of protection against corrosion and trail debris.

• Diameter x Width: 18" x 9"
• Bolt Pattern: 8x6.5" (8x165.1mm)
• Offset: 12mm
• Backspacing: 5.5"
• Load Rating: 4,000 lbs
• Finish: Double Black Powder Coat
• Construction: High-strength aluminum alloy
• MPN: 8018908055DB

Fits 2023-2025 Ford F-250 and F-350 Super Duty 4WD models.

The ICON Vehicle Dynamics Radius Arm System is engineered to correct suspension geometry and improve drivability on lifted 2023-2025 Ford Super Duty trucks. These arms feature built-in adjustable caster cams, allowing for precise alignment tuning without the need for additional caster bushings or radius arm drop brackets. This system provides an ample caster range suitable for front lift heights ranging from 2 to 5.5 inches over stock.

Constructed from CNC laser-cut and CNC-machined steel, these arms utilize a fully boxed design for maximum strength and durability. The arm profile is specifically optimized for tire clearance, allowing the use of 37-inch tall tires at full steering lock (when paired with a 5.5-inch backspace wheel). Each arm is equipped with a maintenance-free, sealed pivot bushing that minimizes road feedback while ensuring quiet, long-lasting operation.

• Precision engineered for 2-5.5" front lift heights
• Fully boxed, fabricated steel construction
• Adjustable caster cams for optimized return-to-center
• Maintenance-free sealed pivot bushings for quiet operation
• Clearance for 37" tires at full steering lock
• Compatible with OnBoard Scales (requires height-specific sensor linkage brackets)
• Durable semi-gloss black powder coat finish
• Manufacturer Part Number: 64043

Fits 2023-2025 Ford F-250 and F-350 Super Duty 4WD trucks equipped with Diesel engines.

The ICON Vehicle Dynamics 2.5" lift coil springs are engineered to improve the ride quality and stance of the Ford Super Duty platform. These front springs utilize a dual-rate design: the initial rate is tuned for plush on-road comfort, while the secondary rate provides the necessary firming under compression to resist bottoming out during off-road use. This kit is specifically calibrated for the heavier front-end weight of Diesel-equipped trucks, providing a level 2.5-inch lift that clears the way for larger wheel and tire combinations.

Built for durability, these springs are finished in a dual-stage semi-gloss powder coat for superior corrosion resistance and are backed by a lifetime guarantee against sagging or breakage. This 100% bolt-on system is designed to integrate seamlessly with the factory mounting points.

• Part Number: 62516
• Lift Height: 2.5 inches
• Design: Dual-rate coil configuration
• Application: Front axle, 4WD Diesel models only
• Finish: Dual-stage semi-gloss powder coat
• Installation: 100% bolt-on
• Warranty: Lifetime guarantee against sagging/breakage

Fits 2016-2023 Nissan Titan XD (S, SV, SL, PRO-4X, Platinum Reserve) 2WD and 4WD models.

The ICON Vehicle Dynamics Stage 1 suspension system is engineered to bridge the gap between heavy-duty work capability and off-road performance. Designed from the ground up for the Nissan Titan XD, this 100% bolt-on system provides approximately 32% increased front wheel travel over stock while significantly improving ride quality on and off the pavement without reducing towing capacity.

This system centers on ICON 2.5 Series front coilovers featuring CAD-plated shock bodies and a massive 7/8-inch shaft for maximum durability. These coilovers are paired with ICON 2.0 Aluminum Series rear shocks, featuring 5/8-inch shafts and a corrosion-resistant anodized finish. Both front and rear shocks are vehicle-specific valved to provide superior damping control. The kit is rounded out with rear lift blocks and heavy-duty U-bolts to level the stance and accommodate larger wheel and tire combinations.

• Adjustable front coilovers provide 2.5-3 inches of lift height
• Approximately 32% increased front wheel travel over stock
• 2.5 Series front coilovers with CAD plated bodies and 7/8-inch shafts
• 2.0 Aluminum Series rear shocks with 5/8-inch shafts
• FK Rod End bearings for minimal deflection and extended longevity
• CNC machined 6061 aircraft-grade aluminum components
• 100% bolt-on installation; no cutting or welding required
• Manufacturer Part Number: K83031

Fits 2005-2023 Toyota Tacoma models including Base, Limited, Pre Runner, SR, SR5, Trail, TRD Off-Road, TRD Pro, TRD Sport, and X-Runner.

The ICON Vehicle Dynamics Stage 6 Suspension System is engineered for the serious driver seeking maximum wheel travel and superior damping control. This comprehensive kit features vehicle-specific tuned 2.5-inch Extended Travel coilover shocks with remote reservoirs. Equipped with ICON’s Compression Damping Control Valve (CDCV), these shocks provide 10 unique settings to fine-tune ride firmness. Front lift is adjustable from 0-3.5 inches on 2005-2015 models and 0-2.75 inches on 2016-2023 models, allowing clearance for larger wheel and tire combinations.

This system includes ICON billet aluminum upper control arms (UCAs) featuring the patented Delta Joint. These arms correct front-end geometry and provide increased caster and camber adjustment for improved drivability and component clearance. In the rear, the kit utilizes 2.5 Aluminum Series Remote Reservoir shocks with CDCV paired with a rear Add-A-Leaf kit. The Add-A-Leaf replaces the factory overload leaves to lower the spring rate by approximately 10% for a more compliant ride while providing 1.5 inches of rear lift.

• Manufacturer Part Number: K53006
• 2.5 Series front coilovers with remote reservoirs and CDCV
• Billet 6061 aircraft-grade aluminum CNC machined UCAs with Delta Joint
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8-inch shafts
• Adjustable 10-setting compression damping via CDC Valves
• Extended travel design for maximum wheel articulation
• Corrosion-resistant CAD plated coilover bodies
• FK Rod End bearings for extended longevity and minimal deflection
• Rear Add-A-Leaf kit for 1.5-inch lift and improved compliance

Fits 2017-2022 Ford F-250 and F-350 Super Duty models (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The ICON Vehicle Dynamics 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion System is engineered to replace the factory coil and shock setup with a performance-driven coilover configuration. This Stage 5 system increases overall damping capacity while providing user-defined ride height adjustment, allowing for improved suspension geometry and off-road capability. The bolt-in design utilizes the factory coil bucket locations, simplifying the installation of high-end suspension components.

• 2.5-inch CAD-plated coilover shock bodies with heavy-duty 7/8-inch shafts
• Remote reservoirs for increased oil volume and superior heat dissipation during hard use
• Eibach coil springs guaranteed for life against sagging or breakage
• FK Rod End bearings for extended service life and minimal deflection
• Vehicle-specific shock valving for optimized ride quality and body control
• Corrosion-resistant anodized aluminum shock bodies on rear and secondary front shocks
• Ride height adjustable: 2.5-3" or 3.25-3.75" of lift depending on vehicle year
• Fully rebuildable and re-valvable components
• Manufacturer Part Number: K63145

Fits select 2017-2022 Ford F-250 and F-350 Super Duty trucks. This ICON K63144 Stage 4 system upgrades your heavy-duty front end by replacing factory coil springs with 2.5 VS Series Remote Reservoir coilovers for superior damping and adjustable ride height.

Designed as a direct bolt-in system for the OE coil bucket, this conversion allows for the addition of a secondary shock while improving overall suspension dynamics. Each coilover is built with CAD-plated bodies, 7/8-inch shafts, and Eibach coil springs. The remote reservoir design increases oil capacity to manage heat more effectively during sustained off-road use or heavy towing. These shocks are fully rebuildable and re-valvable, allowing for custom tuning and a lifetime of service.

• Provides 2.5-3" or 3.25-3.75" of lift depending on the specific year and model
• Vehicle-specific shock valving for balanced ride quality on and off-road
• Large 7/8" shock shafts with corrosion-resistant CAD plating
• FK Rod End bearings for maximum longevity and minimal deflection
• Eibach coil springs guaranteed for life against sagging or breakage
• Remote reservoir design for improved cooling and consistent damping
• Bolt-in installation fits directly into factory coil bucket locations
• Manufacturer Part Number: K63144

Fits 2017-2023 Ford F-250 and F-350 Super Duty 4WD models.

The ICON Stage 3 Coilover Conversion System transforms the front suspension of your 2017-2023 Ford Super Duty from a traditional coil and shock setup to a high-performance coilover configuration. This system is engineered to provide 2.5-3" or 3.25-3.75" of lift (depending on year and trim) while significantly improving damping and control on rough terrain, construction sites, and highways. The heart of the Stage 3 system is the 2.5 Series remote reservoir coilovers and 2.5 Aluminum Series piggyback reservoir rear shocks, which provide increased oil volume for superior heat dissipation and consistent damping during heavy use or towing.

To ensure proper suspension geometry, ICON includes an adjustable front track bar with a massive FK rod end for precise axle centering and alignment cams to correct caster. The rear is upgraded with leaf spring expansion packs, which replace factory blocks to provide a more compliant ride and reduce axle wrap under load. This complete system (MPN K63143L) provides a comprehensive suspension overhaul without requiring driveshaft modifications.

• 2.5 Series remote reservoir front coilovers (adjustable 2.5-3" or 3.25-3.75" lift)
• 2.5 Aluminum Series piggyback reservoir rear shocks for optimal cooling
• On-vehicle adjustable front track bar with high-strength FK rod end
• Rear leaf spring expansion packs, blocks, and U-bolts for improved ride and reduced axle wrap
• Application-specific alignment cams for proper caster setting
• Increased wheel travel and improved body-roll control compared to stock
• Maintains factory towing capacity
• Manufacturer Part Number: K63143L

Fits 2005-2016 Ford F-250 and F-350 Super Duty.

The ICON Stage 5 Coilover Conversion System replaces factory front coil springs with high-performance 2.5 Series Remote Reservoir coilovers, delivering a significant increase in damping capacity and ride quality. Designed to bolt directly into the OE coil bucket locations, this system provides 2.5-3" of user-adjustable ride height while allowing for the addition of a secondary shock for maximum control. Every component is engineered for durability, featuring CAD-plated shock bodies, 7/8" shafts, and FK Rod End bearings to minimize deflection and extend service life.

• Adjustable 2.5-3" lift height for precise leveling
• 2.5 Series Remote Reservoir coilovers for superior heat dissipation
• Eibach coil springs guaranteed for life against sagging or breakage
• Corrosion-resistant CAD plated coilover bodies with 7/8" induction-hardened shafts
• FK Rod End bearings for extended longevity and minimal deflection
• Fully rebuildable and revalveable design for custom tuning
• Includes rear and secondary front shocks with corrosion-resistant anodized aluminum bodies
• Direct bolt-in installation fits factory coil bucket locations
• Manufacturer Part Number: K63105

Fits select 2005-2016 Ford F-250 and F-350 Super Duty trucks.

The ICON Vehicle Dynamics Stage 4 Coilover Conversion System replaces the factory coil spring and shock setup with high-performance 2.5 Series Remote Reservoir coilovers. This bolt-in system is engineered to provide superior damping capacity and 2.5 to 3 inches of user-adjustable ride height. By transitioning to a coilover configuration, your Super Duty gains significantly improved on-road stability and off-road control, with the added flexibility to integrate a secondary shock if needed.

Built for durability in harsh environments, the coilovers feature CAD-plated bodies and massive 7/8-inch shafts. ICON utilizes Eibach coil springs, guaranteed for life against sagging, along with FK Rod End bearings to minimize deflection and extend service life. These components are fully rebuildable and revalveable, ensuring your suspension can be maintained or tuned for specific vehicle loads and terrains.

• Manufacturer Part Number: K63104
• Ride height adjustable from 2.5" to 3"
• 2.5 Series remote reservoir coilovers with CAD-plated bodies
• 7/8" diameter induction hardened, chrome plated shock shafts
• Corrosion-resistant anodized aluminum rear shock bodies
• Eibach coil springs guaranteed for life against sagging or breakage
• FK Rod End bearings for minimal deflection and extended longevity
• Bolt-in system fits directly into OE coil bucket locations
• Vehicle-specific shock valving for precise ride quality and control
• Shocks are fully rebuildable and revalveable

Fits 2005-2016 Ford F-250 and F-350 Super Duty trucks.

The ICON Stage 3 Coilover Conversion System transforms the suspension of your Super Duty, replacing the factory coil spring setup with high-performance 2.5 VS Series Remote Reservoir Coilovers. This system provides a significant increase in damping capacity while allowing for user-defined ride height adjustments from 2.5 to 3 inches. By converting to a coilover, you achieve superior ride quality, reduced body roll, and improved handling across both on and off-road terrain.

This Stage 3 system includes ICON 2.5 Aluminum Series piggyback reservoir rear shocks. These shocks feature one-piece impact extruded aluminum cylinders for lighter weight and superior corrosion resistance compared to traditional steel bodies. Built with Eibach coil springs and FK Rod End bearings, the entire system is fully rebuildable and revalveable to suit your specific driving requirements.

• Adjustable ride height from 2.5" to 3"
• 2.5 VS Series front coilovers with remote reservoirs
• 2.5 Aluminum Series rear shocks with piggyback reservoirs
• Corrosion-resistant CAD plated coilover bodies with heavy-duty 7/8" shafts
• Lifetime-guaranteed Eibach coil springs
• FK Rod End bearings for maximum longevity and minimal deflection
• Bolt-in system utilizes OE coil bucket locations for straightforward installation
• Fully rebuildable and revalveable design
• Manufacturer Part Number: K63103

Fits 2017-2021 Ford F-250 and F-350 Super Duty 4WD models.

The ICON Vehicle Dynamics Stage 5 suspension system is engineered to level 2017-2021 Ford Super Duty trucks while significantly enhancing ride quality and off-road capability. This comprehensive system is designed for demanding applications including heavy towing, job site duty, and high-speed off-road use. The Stage 5 kit distinguishes itself by including ICON CDC (Compression Damping Control) Valve 2.5 Aluminum Series shocks, allowing for external adjustment of damping characteristics to suit varying loads and terrain. To ensure maximum steering control, the kit also features a dual opposing 2.0 Aluminum Series steering stabilizer system.

Construction features include corrosion-resistant 6061-T6 anodized aluminum shock bodies and 7/8-inch induction hardened, chrome-plated shafts. The system utilizes ICON-engineered dual-rate coil springs to provide a compliant ride on the street while maintaining enough bottoming resistance for aggressive off-road use, delivering approximately 25% more front wheel travel than the stock configuration. High-quality FK Rod End bearings are used for durability and precise suspension articulation.

• Fits 2017-2021 F-250 / F-350 4WD applications
• 2.5-inch lift height levels the vehicle front-to-rear
• CDC Valve technology for 10-position user-adjustable compression damping
• 2.5 Aluminum Series front remote reservoir and rear piggyback reservoir shocks
• Dual opposing 2.0 Aluminum Series steering stabilizer kit included
• Adjustable track bar designed specifically for 2017-UP geometry
• Includes alignment cams for correct caster specifications
• Fully rebuildable and revalvable shocks
• Manufacturer Part Number: K62515