Fits select 2005-2021 Nissan Frontier, NV1500, NV2500, NV3500, Pathfinder, Xterra, and Suzuki Equator (VQ40DE 4.0L V6).

Maintain critical oil clearances and ensure bottom-end reliability with this King Engine Bearings connecting rod bearing set. These standard-size (STD) bearings are designed to replace worn factory components during a rebuild or refresh, providing the consistent oil film thickness necessary to protect the crankshaft and connecting rods under load. Engineered for the 4.0L V6 VQ40DE engine, this set is manufactured to precise tolerances to ensure a proper fit within the rod housing bores.

• Manufacturer Part Number: CR6840CP
• Bearing Size: STD (Standard)
• Engine Compatibility: Nissan VQ40DE (6-Cylinder)
• Direct replacement for factory rod bearings
• Designed for consistent load distribution and heat dissipation

Fits select 2004-2020 Buick, Cadillac, Chevrolet, GMC, Pontiac, Saab, Saturn, and Suzuki models (3.6L).

The King Engine Bearings Holden 175/190 connecting rod bearing set is engineered for high-precision engine rebuilds on General Motors 3.6L V6 platforms. These bearings are designed to maintain critical oil clearances and reduce friction, ensuring long-term durability and consistent oil pressure within the bottom end. Built to meet or exceed OE tolerances, this set is a direct replacement for worn factory bearings in high-mileage or performance-refreshed engines.

• Manufacturer Part Number: CR6826SI
• Series: Holden 175/190 Architecture
• Engine Compatibility: 3.6L V6
• Maintains consistent oil film and rotational clearance
• Direct fit for factory connecting rods
• High-strength construction for increased fatigue resistance

Fits select 2001-2024 Nissan and Infiniti models equipped with the VQ35DE 3.5L V6 engine, including the 350Z, Altima, Maxima, G35, and FX35.

Engineered for high-performance and racing applications, this King Engine Bearings rod bearing set is designed to withstand the increased loads and cylinder pressures of a built VQ35DE. The STDX sizing provides an extra .001" (0.025mm) of oil clearance compared to standard bearings, making it a critical choice for engine builders who require additional oil film thickness and enhanced cooling for high-RPM or forced induction setups.

• Engine Application: Nissan VQ35DE 3.5L V6
• Bearing Size: STDX (.001" Extra Oil Clearance)
• Position: Connecting Rod
• Optimized for high-load performance environments
• Manufacturer Part Number: CR6775XPSTDX

Fits select 2001-2024 Nissan and Infiniti models equipped with the VQ35DE 3.5L V6 engine, including 350Z, Altima, Maxima, Murano, Pathfinder, Quest, FX35, G35, and M35.

The King Engine Bearings XP-series rod bearing set is engineered for high-load, high-RPM performance applications where OE-grade bearings may fail. Featuring the CR6775XP part number, these bearings are constructed with King's advanced pMax Black tri-metal material, offering a 24% increase in load capacity and superior fatigue resistance compared to standard bearings. This set is provided in a standard (STD) bore size, making it a direct replacement for factory bearings during a precision engine rebuild or performance upgrade.

• Manufacturer Part Number: CR6775XP
• Engine Compatibility: Nissan VQ35DE (3.5L V6)
• Bearing Series: XP (Performance/Racing)
• Bearing Size: STD (Standard)
• Material: pMax Black tri-metal construction for enhanced durability
• Precision manufactured for consistent oil clearance and thermal transfer

Fits select 1992-2011 Audi, Porsche, and Volkswagen models (including VR6/V6 2.8L, 3.2L, and 3.6L engines).

This King Engine Bearings Performance pMaxKote rod bearing set (CR6764XPC) is engineered for high-load applications where superior engine protection is required. These bearings feature a sophisticated nano-composite polymer coating applied over a tri-metal structure. The pMaxKote technology significantly reduces friction and provides a critical layer of protection during cold starts and high-RPM operation, helping to prevent seizure even in the event of temporary oil starvation.

• Manufacturer Part Number: CR6764XPC
• Size: STD (Standard)
• Series: Performance pMaxKote
• Material: Tri-metal with polymer coating for enhanced load capacity and seizure resistance
• Designed for high-performance street and track use

Authoritative Fitment:

Fits select 1992-2011 Audi, Porsche, and Volkswagen models (including Golf GTI, Jetta, Passat, Cayenne, and TT Quattro).

This King Engine Bearings connecting rod bearing set is engineered to restore factory-spec oil clearances and provide reliable crankshaft support for AES, AUE, and ABV engine architectures. These standard-size (STD) bearings are critical for engine overhauls, ensuring consistent lubrication and protecting the crank journals from premature wear.

• Manufacturer Part Number: CR6764AM
• Bearing Size: STD (Standard)
• Quantity: Set of 6
• Engine Compatibility: VW AES, AUE, ABV
• Precision-manufactured for direct replacement of factory bearings

Fits select 1992-2005 Lexus GS300, IS300, SC300, and Toyota Supra (3.0L 2JZ-GE / 2JZ-GTE).

Built for high-output engine builds, this King Engine Bearings XP-series rod bearing set features the advanced pMaxKote nano-composite polymer coating. This factory-applied coating is designed to protect your 3.0L rotating assembly during cold starts and high-load conditions where oil films may become thin. These bearings are sized at +.026mm, providing engine builders with the precise dimensions needed to achieve exact oil clearances on the crank journals.

• Manufacturer Part Number: CR6754XPC.026
• Series: pMaxKote XP Performance
• Size: +.026mm Oversize
• Engine Compatibility: 3.0L (2JZ-GE, 2JZ-GTE)
• Material: Hardened tri-metal copper-lead construction
• Finish: Polymer coated for superior seizure resistance and friction reduction

Fits 1992-2005 Lexus GS300, IS300, SC300, and Toyota Supra (3.0L).

Built for high-load racing applications, this King Engine Bearings pMaxKote Performance Rod Bearing Set provides the durability required for performance-built 2JZ-GE and 2JZ-GTE engines. These XP-series tri-metal bearings feature a factory-applied pMaxKote nano-composite polymer coating. This advanced coating improves wear resistance and protects against metal-to-metal contact during oil starvation or high-RPM operation without changing the bearing's precision wall thickness.

• Series: XP Performance with pMaxKote
• Bearing Material: Tri-metal pMaxBlack copper-lead
• Size: STD (Standard)
• Engine Compatibility: 2JZ-GE / 2JZ-GTE (3.0L)
• Manufacturer Part Number: CR6754XPC

The pMaxKote finish is designed to enhance lubrication and maintain superior oil film consistency, making it an essential upgrade for forced induction or high-revving naturally aspirated builds.

Fits select 1991-2002 Infiniti G20 and Nissan 200SX, NX, and Sentra models.

King Engine Bearings Performance Rod Bearing Sets are engineered for high-load, high-RPM environments where standard tolerances are insufficient. These bearings are designed for racing and high-performance street builds, providing the durability needed for turbocharged or high-compression Nissan engines. The STDX size provides standard diameter with additional oil clearance, ensuring optimal lubrication under extreme thermal stress.

• Manufacturer Part Number: CR6697XPSTDX
• Bearing Series: Performance / XP
• Size: STDX (Standard with .001 inch extra clearance)
• Compatible with Nissan RB25 and RB26 platforms
• Proven tri-metal construction for superior fatigue resistance
• Ensures consistent oil film thickness for crank journal protection

Fits Nissan RB25 and RB26 24V engines.

The King Engine Bearings XP-Series rod bearing set is specifically engineered for high-load, high-RPM performance applications. This set features King's p-Max Black coating, a specialized overlay that reduces friction and provides superior seizure resistance during extreme operating conditions. These bearings are manufactured with a hardened tri-metal construction to withstand the cylinder pressures common in turbocharged RB-series builds.

The STDX size specification provides .001" (0.025mm) of additional oil clearance compared to a standard bearing, allowing for increased oil flow and enhanced cooling—a critical factor for engine longevity in racing environments.

• Manufacturer Part Number: CR6697XPCSTDX
• Series: XP-Series Performance Coated
• Size: STDX (.001" Extra Clearance)
• Material: Tri-metal substrate with p-Max Black overlay
• Engine Compatibility: Nissan RB25/RB26 24V
• Includes: Full set of rod bearings

Fits Nissan RB25DET and RB26DETT 24V engines.

This King Engine Bearings pMaxKote performance rod bearing set (CR6697XPC) is designed for high-load racing applications where oil film thickness can be compromised. The pMaxKote is a factory-applied nano-composite polymer coating that reduces friction and provides an extra layer of protection against metal-to-metal contact during cold starts or oil starvation, all without altering the bearing's oil clearance.

• Manufacturer Part Number: CR6697XPC
• Size: STD (Standard)
• Series: pMaxKote Performance
• Application: Nissan RB25DET and RB26DETT 24V engines
• Features factory-applied anti-friction polymer coating
• Designed for high-RPM and high-pressure performance builds

Ensure your engine's rotating assembly is built to handle high-stress conditions with the King Engine Bearings Performance Rod Bearing Set. Designed for high-load applications, these bearings provide the fatigue resistance and precision tolerances required for performance builds and high-RPM reliability.

This set is finished to a +0.25mm (0.010 in) undersize, making it the ideal choice for crankshafts that have been machined to restore journal integrity. As part of King's performance line, these bearings are engineered with specialized metallurgy to outperform standard OE-style components in high-cylinder-pressure environments.

• Manufacturer Part Number: CR6697XP0.25
• Bearing Size: +0.25mm (+0.010 in) Undersize
• Material: High-strength tri-metal performance construction
• Application: Connecting rod bearing set

Vehicle Fitment: Fits select 1991-2002 Infiniti G20 and Nissan 200SX, NX, and Sentra models.

Fits select 1991-2002 Infiniti G20 and Nissan 200SX, NX, and Sentra models.

This King Engine Bearings Performance Rod Bearing Set (CR6697XP) is engineered for high-load applications where precision and durability are paramount. Sized at Standard (STD), these bearings are a critical component for engine overhauls where the crankshaft journals remain within factory tolerances. As part of King's performance line, these bearings provide enhanced fatigue resistance and maintain a consistent oil film under the stresses of high-RPM operation and performance driving.

• Manufacturer Part Number: CR6697XP
• Size: STD (Standard)
• Engineered for performance RB25, RB26, and select 4-cylinder applications
• High-strength tri-metal construction for superior load capacity
• Consistent tolerances for optimal oil clearance

Fits select 1984-2004 Nissan, Infiniti, and Mercury vehicles equipped with VG30DE, VG30DETT, VG30E, and VG30T engines.

King Engine Bearings XP-Series rod bearings are engineered for high-load, high-RPM applications where standard bearings may fail. This STDX (Standard Extra Clearance) set is specifically designed for the Nissan VG30 engine platform, providing an additional 0.001-inch of oil clearance compared to standard bearings. This extra clearance is vital for performance engines that utilize higher-viscosity oils or require increased flow to maintain a stable hydrodynamic film under the stress of turbocharging or high-compression naturally aspirated builds.

• Manufacturer Part Number: CR6676XPSTDX
• Bearing Series: King XP-Series Performance
• Bearing Size: STDX (Standard Extra Clearance)
• Engine Compatibility: VG30DE, VG30DETT, VG30E, VG30T
• Application: Direct fit for crankshaft connecting rod journals

Whether you are rebuilding a 300ZX Turbo for the track or refreshing a high-mileage Frontier, these bearings provide the technical tolerances needed for reliable engine performance. This set includes all necessary bearings for one complete engine service.

Fits select 1984-2004 Nissan, Infiniti, and Mercury vehicles including 300ZX, Pathfinder, Frontier, Xterra, and J30 (VG30E / VG30DE / VG30DETT / VG30T).

King Engine Bearings Performance rod bearing sets are engineered for high-load applications where standard OE-style bearings might fail. This set features the XP-series high-performance tri-metal construction, designed to withstand the increased cylinder pressures found in turbocharged, supercharged, or high-RPM naturally aspirated builds. The advanced metallurgy provides the necessary fatigue strength and embeddability to protect your crankshaft during demanding operation.

• Manufacturer Part Number: CR6676XP
• Bearing Size: STD (Standard)
• Engine Series: Nissan VG30 (VG30DE, VG30DETT, VG30E, VG30T)
• Material: High-performance tri-metal
• Quantity: Complete rod bearing set for one engine

Whether you are rebuilding a twin-turbo 300ZX or refreshing a high-mileage Frontier, these bearings provide the precise tolerances and durability required for a professional-grade bottom-end assembly.

Fits select 1982-2006 BMW 3 Series, 5 Series, X3, X5, Z3, and Z4 models (2.0L / 2.5L / 2.7L).

Engineered for high-performance builds and demanding racing applications, the King Engine Bearings XP-series performance rod bearing set provides the durability required for high-load environments. This set features the STDX (Standard Extra Clearance) sizing, specifically designed for engine builders who require additional oil clearance to maintain a consistent oil film and improve cooling during high-RPM operation.

King's XP-series utilizes advanced metallurgy to provide superior load-carrying capacity and fatigue resistance compared to standard OE-style bearings. Whether you are rebuilding a high-mileage M50 or prepping an M20 for the track, these bearings offer the precision tolerances needed for a reliable rotating assembly.

• Manufacturer Part Number: CR6640XPSTDX
• Series: XP-Series Performance
• Bearing Size: STDX (Standard Extra Clearance)
• Construction: High-performance tri-metal or equivalent racing grade
• Fitment: Fits BMW M20, M50, and M54 engine families (confirm displacement)

Authoritative Vehicle Fitment

Fits select 1982-2000 BMW 323i, 323Ci, 325i, 328i, 525i, 528i, and Z3 models (2.0L / 2.5L / 2.7L).

King Engine Bearings CR6640XPC Coated Performance Rod Bearing Sets are engineered for high-demand racing and performance applications. These bearings feature a specialized coating designed to reduce friction and provide an extra layer of protection against oil starvation and cold-start wear. Built with tight tolerances and high-load capacity tri-metal construction, the CR6640XPC series is the ideal choice for engine builders looking to enhance the reliability of the BMW M20 and M50 engine families.

• Manufacturer Part Number: CR6640XPC
• Part Type: Connecting Rod Bearing Set
• Engine Fitment: 2.0L, 2.5L, 2.7L
• Construction: High-strength tri-metal with advanced anti-friction coating
• Increased durability for high-RPM and high-load conditions
• Designed for precise oil clearance maintenance

Fits select 1982-2006 BMW 3 Series, 5 Series, X3, X5, Z3, and Z4 models (2.0L / 2.5L / 2.7L).

This King Engine Bearings Performance Rod Bearing Set is engineered for high-load applications and performance engine builds. Designed to provide superior durability in high-RPM environments, these bearings are a critical upgrade for M20 and M50-based engines. These bearings ensure precise oil clearance and consistent performance under the increased stresses of a modified or hard-driven engine.

• Manufacturer Part Number: CR6640XP
• Product Line: XP-Series Performance
• Size: STD (Standard)
• Engine Fitment: 2.0L, 2.5L, and 2.7L Inline-6
• Compatible Series: Fits M20, M50, and later variants across various BMW chassis

Maintain critical oil clearances and ensure bottom-end reliability with this King Engine Bearings connecting rod bearing set. Designed for precision engine building, these bearings are manufactured to tight tolerances to provide consistent performance and reduce friction across the crankshaft journals. Whether you are performing a standard refresh or a complete engine overhaul, these bearings replace worn factory components to restore oil pressure and engine longevity.

Fits select 1982-2000 BMW 323, 325, 328, 525, 528, and Z3 models.

• Manufacturer Part Number: CR6640SM
• Engineered for precise oil clearance and reliable lubrication
• High-quality construction resists fatigue and surface wear
• Essential component for engine rebuilds and bottom-end maintenance
• Direct replacement for OE rod bearings

Fits select 1987-2005 Chrysler, Dodge, Hyundai, Mitsubishi, and Plymouth vehicles equipped with 3.0L (6G72) or 2.5L (6G73) V6 engines.

This King Engine Bearings AM-series rod bearing set is an ideal choice for engine rebuilds and routine maintenance where standard clearances are required. Engineered for OE-replacement applications, these bearings feature a high-quality bimetal aluminum alloy construction that provides excellent fatigue resistance and conformability. This set is critical for maintaining proper oil pressure and protecting the crankshaft and connecting rods from metal-to-metal contact during operation.

• Manufacturer Part Number: CR6629AM
• Size: STD (Standard)
• Fits Engines: 181CI 3.0L 6G72 V6 / 152CI 2.5L 6G73 V6
• Material: Aluminum alloy bimetal
• Designed to meet or exceed OE tolerances for fit and finish
• Set includes necessary bearings for one complete engine service

Fits select 1968-1993 BMW models including the 2500, 2800, 3.0CS, 528i, 535i, 633CSi, 735i, and Bavaria (M30/M32/B35 engines).

King Engine Bearings' Performance Series rod bearing sets are engineered for enthusiasts and engine builders who demand tighter tolerances and superior durability than standard OE-style bearings. This set is specifically designed for the classic BMW straight-six architecture, providing the reliability needed for both high-mileage restoration and high-load performance applications.

• Manufacturer Part Number: CR6609AM
• Optimized for BMW M30, M32, and B35 engine families
• Performance-grade construction for improved load carrying capacity
• Precision-manufactured to maintain consistent oil clearances across all journals
• Direct replacement for factory connecting rod bearings
• Designed to withstand higher RPM and operating temperatures

Fits select 1970-1984 Nissan 240Z, 260Z, 280Z, 280ZX, 810, and Maxima models equipped with the L-series engine.

This King Engine Bearings connecting rod bearing set is engineered for reliable performance and precision fitment during engine overhauls or bottom-end refreshes. Designed as a direct replacement for worn factory bearings, these components help maintain proper oil clearance and rotational stability for the L28 and related powerplants. The AM-series construction provides a durable aluminum alloy lining on a steel backing, offering excellent embeddability and conformability for OE-level maintenance.

• Manufacturer Part Number: CR6607AM
• Bearing Size: STD (Standard)
• Engine Application: Nissan L28 and related inline-six variants
• Material: Aluminum alloy on steel backing
• Precision-machined for consistent oil film maintenance

Fits select 1967-1992 Toyota Celica Supra, Corona, Cressida, Crown, Mark II, and Supra models equipped with 5ME, 5MGE, 7MGE, or 7MGTE engines.

This King Engine Bearings Rod Bearing Set is designed for engine builders and enthusiasts requiring a precise, standard-size (STD) replacement for Toyota inline-six engines. These bearings are manufactured to tight tolerances to ensure proper oil clearance and reliable operation, making them an ideal choice for both routine maintenance and comprehensive engine overhauls.

• Manufacturer Part Number: CR6605AM
• Bearing Size: STD (Standard)
• Compatible Engines: Toyota 5ME, 5MGE, 7MGE, 7MGTE
• Application: Connecting Rod Bearing Set
• Designed to meet or exceed OE specifications for oil film retention and durability

Fits select 1992-2010 Volvo 850, 960, S40, S60, S70, S80, S90, V50, V70, and V90 models.

The King Engine Bearings XP-Series Connecting Rod Bearing Set is engineered for high-load applications where precise tolerances and superior durability are required. As part of King’s high-performance line, these bearings utilize a tri-metal construction designed to withstand the increased cylinder pressures and RPMs found in modified or hard-driven engines. They ensure consistent oil clearance and optimal lubrication at the rod journals to prevent premature wear and catastrophic engine failure.

• Manufacturer Part Number: CR509XP
• Series: XP-Series (High Performance)
• Material: Advanced tri-metal construction for enhanced fatigue strength
• Designed for precise oil clearance and improved load capacity
• Direct replacement for factory rod bearings in supported Volvo engines

Fits select 2013-2020 Ford Edge, Fusion, Lincoln MKC, MKZ, and Nautilus (2.0L / 2.3L).

Ensure your engine's bottom end is built to handle increased loads with the King Engine Bearings CR4695XP Performance Rod Bearing Set. These XP-series bearings are engineered for high-output applications where factory tolerances and materials aren't enough. Designed specifically for the Ford EcoBoost 2.0L and 2.3L platforms, these bearings provide the durability and precision required for performance street and track builds.

• Manufacturer Part Number: CR4695XP
• Bearing Size: STD (Standard)
• Series: XP Performance
• Engine Fitment: 2.0L and 2.3L EcoBoost
• Maintains consistent oil clearance for critical lubrication
• High-load capacity for turbocharged applications

Fits Ford EcoBoost 2.0L and 2.3L engines.

Restore the integrity of your engine's rotating assembly with this King Engine Bearings connecting rod bearing set. Engineered to meet exacting tolerances, the CR4695MC set is designed to replace worn factory bearings, ensuring proper oil clearances and reducing friction at the crankshaft journal. Whether you are performing a standard rebuild or refreshing a performance-oriented EcoBoost power plant, these bearings provide the durability and precise fitment required for long-term engine health.

• Manufacturer Part Number: CR4695MC
• Engine Compatibility: Ford EcoBoost 2.0L and 2.3L
• Component Type: Connecting Rod Bearing Set
• Precision-manufactured for consistent oil film retention and load distribution

Fits select 2006-2022 Hyundai and Kia models equipped with the 2.0T engine, including Sonata, Genesis Coupe, Santa Fe, Optima, and Sportage.

The King CR4668XP Connecting Rod Bearing Set is a critical component for engine rebuilds and maintenance on the World Engine platform. These bearings are engineered to provide a precise interface between the connecting rod and the crankshaft journal, ensuring consistent oil clearance and reducing friction under high-load conditions. Designed as a direct replacement for worn factory bearings, this set provides the durability required for both standard operation and performance applications.

• Manufacturer Part Number: CR4668XP
• Engine Application: 2.0T
• Platform: World Engine (GEMA)
• Compatibility: Replaces factory rod bearings for select Hyundai and Kia 4-cylinder engines
• Construction: Engineered for high-stress automotive environments

Restore the integrity of your engine's rotating assembly with the King World Engine Connecting Rod Bearing Set. These standard-sized (STD) bearings are engineered to provide precise oil clearances and consistent load distribution, protecting your crankshaft and rods from premature wear. Designed for the "World Engine" (Theta) platform, this set ensures a factory-spec fit for high-stress applications.

Fits select 2006-2022 Hyundai and Kia models including Sonata, Optima, Sorento, and Sportage (2.0T).

• Manufacturer Part Number: CR4668SM
• Bearing Size: STD (Standard)
• High-strength construction designed for the demands of the 2.0T engine platform
• Precision-manufactured to ensure optimal oil film thickness and reliability
• Direct replacement for worn factory bearings during engine overhauls or refreshes