Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit. Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example).

• Does NOT include Fuel Level Sending Unit. Does NOT Include Fittings.
• Includes Wiring Harnesses for pumps and fuel level sending unit.

This Part Fits:

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit. Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example).

• Does NOT include Fuel Level Sending Unit. Does NOT Include Fittings.
• Includes Wiring Harnesses for pumps and fuel level sending unit.

This Part Fits:

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit. Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example).

• Does NOT include Fuel Level Sending Unit. Does NOT Include Fittings.
• Includes Wiring Harnesses for pumps and fuel level sending unit.

This Part Fits:

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit. Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH).

• Does NOT include Fuel Level Sending Unit. Does NOT Include Fittings.
• Includes Wiring Harnesses for pumps and fuel level sending unit.

This Part Fits:

Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance has the solution! The Snow Performance Multi-Pump Fuel Hats feature a billet aluminum manifold with CNC machined passages making these the nicest high output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC machined bodies hold the fuel pumps securely and feature Viton chemical-resistant O-rings and guarantee a perfect leak-free fit. Snow Performance Fuel Hats are engineered, CNC machined, and built in the USA from 6061 billet aluminum. These billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory tank features including, the OE fuel level sending unit, EVAP system, filler neck, and if equipped with saddle style tanks, the fuel transfer pump functionality. Snow fuel hats feature female 10AN ORB feed and 8AN ORB return ports. 90 degree swivel adapter fittings are sold separately to adapt to your desired combination of 10AN, 8AN or 6AN lines. To meet your specific vehicle's fuel demands, these pump assemblies are configurable with a combination of 2 or 3 fuel pumps. No knock-off pumps here. Get OE reliability with genuine TI Automotive (Walbro) fuel pumps in your choice of flow rates (450LPH or 470LPH). These fuel pumps are designed for a return-style installation only. Do not attempt to run these pumps in a returnless application. These pumps are compatible with 100% Gasoline, 100% Ethanol or any blend of Gasoline and Ethanol (E10, E85, E98 for example).

• Does NOT include Fuel Level Sending Unit. Does NOT Include Fittings.
• Includes Wiring Harnesses for pumps and fuel level sending unit.

This Part Fits:

If you're looking for cheap "universal" style fuel rails with crappy mounting brackets that allow fuel leaks, this product is not for you! If you're looking for the best fuel rails on the market, you have come to the right place. Snow Performance Fuel Rails are designed and built in the USA from the highest quality components available. Snow fuel rails are CNC machined for a perfect fit and are anodized in black for the ultimate in looks and corrosion resistance. Snow fuel rails utilize high-strength stainless-steel mounting brackets to ensure the rails stay in place and do not leak in high-pressure conditions. Snow rails are ready to flow as much fuel as your engine needs, made for use with 8AN ORB fittings in the inlets/outlets of the rails there is no need to worry about fuel leaks or flow restrictions. These rails also incorporate two 1/8-NPT ports in each rail for gauges, sensors, or fuel fittings to feed your nitrous system with no additional fittings required. These fuel rails fit 2018-Up Mustang and F150's with the following Coyote manifolds : 1st Gen GT (2011-2014) 2nd Gen (2015-2017) 3rd Gen (2018-Up) Boss 302 GT350 Cobra Jet All truck intake manifolds. Kit includes: Two Billet Fuel Rails Two 1/8-NPT Plugs One Pressure Sensor Adapter for 2018+ Mustangs One 3/8" (10mm) EFI fitting to feed the factory HPFP Four 8AN Inlet/Outlet Fittings Mounting Brackets for Factory Height Coyote Injectors Rails are designed to work with a stock height injector (60mm). Shorter injectors can be used in conjunction with injector spacers to make the overall mounting height of the injector 60mm.

• Black Fuel Rails

This Part Fits:

If you're looking for cheap "universal" style fuel rails with crappy mounting brackets that allow fuel leaks, this product is not for you! If you're looking for the best fuel rails on the market, you have come to the right place. Snow Performance Fuel Rails are designed and built in the USA from the highest quality components available. Snow fuel rails are CNC machined for a perfect fit and are anodized in black for the ultimate in looks and corrosion resistance. Snow fuel rails utilize high-strength stainless-steel mounting brackets to ensure the rails stay in place and do not leak in high-pressure conditions. Snow rails are ready to flow as much fuel as your engine needs, made for use with 8AN ORB fittings in the inlets/outlets of the rails there is no need to worry about fuel leaks or flow restrictions. These rails also incorporate two 1/8-NPT ports in each rail for gauges, sensors, or fuel fittings to feed your nitrous system with no additional fittings required. These fuel rails fit 2011-2017 Mustang and F150's with the following Coyote manifolds: 1st Gen GT (2011-2014) 2nd Gen (2015-2017) 3rd Gen (2018-Up) (When retro-fitted to an 11-17 engine) Boss 302 GT350 Cobra Jet All Coyote truck intake manifolds. Kit includes: Two Billet Fuel Rails Four 1/8-NPT Plugs Two 8AN Inlet/Outlet Fittings One 8AN ORB Plug Mounting Brackets for Factory Height Coyote Injectors 8AN to 8AN ORB 90 degree Swivel Fitting 8AN to 3/8 (10mm) Fuel Line Adapter 8AN PTFE Fuel Feed Hose Pre-Made 8AN PTFE Crossover Hose Rails are designed to work with a stock height injector (60mm). Shorter injectors can be used in conjunction with Snow Performance injector spacers (available separately) to make the overall mounting height of the injector 60mm.

• Black Fuel Rails

This Part Fits:

If you're looking for cheap "universal" style fuel rails with crappy mounting brackets that allow fuel leaks, this product is not for you! If you're looking for the best fuel rails on the market, you have come to the right place. Snow Performance Fuel Rails are designed and built in the USA from the highest quality components available. Snow fuel rails are CNC machined for a perfect fit and are anodized in black for the ultimate in looks and corrosion resistance. Snow fuel rails utilize high-strength stainless-steel mounting brackets to ensure the rails stay in place and do not leak in high-pressure conditions. Snow rails are ready to flow as much fuel as your engine needs, made for use with 8AN ORB fittings in the inlets/outlets of the rails there is no need to worry about fuel leaks or flow restrictions. These rails also incorporate two 1/8-NPT ports in each rail for gauges, sensors, or fuel fittings to feed your nitrous system with no additional fittings required. These fuel rails fit 2011-2017 Mustang and F150's with the following Coyote manifolds: 1st Gen GT (2011-2014) 2nd Gen (2015-2017) 3rd Gen (2018-Up) (When retro-fitted to an 11-17 engine) Boss 302 GT350 Cobra Jet All Coyote truck intake manifolds. Kit includes: Two Billet Fuel Rails Four 1/8-NPT Plugs Two 8AN Inlet/Outlet Fittings One 8AN ORB Plug Mounting Brackets for Factory Height Coyote Injectors 8AN to 8AN ORB 90 degree Swivel Fitting 8AN to 3/8 (10mm) Fuel Line Adapter 8AN PTFE Fuel Feed Hose Pre-Made 8AN PTFE Crossover Hose Rails are designed to work with a stock height injector (60mm). Shorter injectors can be used in conjunction with Snow Performance injector spacers (available separately) to make the overall mounting height of the injector 60mm.

• Black Fuel Rails

This Part Fits:

If you're looking for cheap "universal" style fuel rails with crappy mounting brackets that allow fuel leaks, this product is not for you! If you're looking for the best fuel rails on the market, you have come to the right place. Snow Performance Fuel Rails are designed and built in the USA from the highest quality components available. Snow fuel rails are CNC machined for a perfect fit and are anodized in black for the ultimate in looks and corrosion resistance. Snow fuel rails utilize high-strength stainless-steel mounting brackets to ensure the rails stay in place and do not leak in high-pressure conditions. Snow rails are ready to flow as much fuel as your engine needs, made for use with 8AN ORB fittings in the inlets/outlets of the rails there is no need to worry about fuel leaks or flow restrictions. These rails also incorporate two 1/8-NPT ports in each rail for gauges, sensors, or fuel fittings to feed your nitrous system with no additional fittings required. These fuel rails fit 2011-2017 Mustang and F150's with the following Coyote manifolds: 1st Gen GT (2011-2014) 2nd Gen (2015-2017) 3rd Gen (2018-Up) (When retro-fitted to an 11-17 engine) Boss 302 GT350 Cobra Jet All truck intake manifolds. Kit includes: Two Billet Fuel Rails Four 1/8-NPT Plugs Four 8AN Inlet/Outlet Fittings Mounting Brackets for Factory Height Coyote Injectors Rails are designed to work with a stock height injector (60mm). Shorter injectors can be used in conjunction with Snow Performance injector spacers (available separately) to make the overall mounting height of the injector 60mm.

• Black Fuel Rails

This Part Fits:

30/100 Micron Stainless Steel Mesh Filter Element

• 30/100 Micron Stainless Steel Mesh Filter Element
• 2 Inch Outer Diameter (O.D.)
• 10AN ORB Female Inlet/Outlet
• Made from Billet Aluminum

Liquid-filled for vibration resistance and durability

• Liquid-filled for vibration resistance and durability
• 1/8-NPT male nipple on the rear of the gauge
• 1.5-inch outside diameter

Fuel Filter Mount - SNF-20001

• Made from Billet Aluminum
• 2" Inner Diameter I.D.

This product is only compatible with ACDelco 13577429, 13507129, and 13507128.

• Entry and Exit fittings are sold separately (NOT Included).

If you're looking for an offshore piece of junk regulator, this product is not for you! If you're looking for the best performing regulator on the market that is designed and built in the USA from the highest quality components available, this is your regulator. Snow Performance's Compact Billet Fuel Pressure Regulator sets itself apart from the competition with a Fluorosilicone coated Nomex diaphragm, and all stainless steel internal components, including the regulator spring. Combine all these features with a body that is CNC-machined billet aluminum, for strength, durability, and anodized black for the ultimate in corrosion resistance. The result is a fuel pressure regulator that responds lightning fast to your vehicle's ever-changing fuel flow demands and is compatible with any type of fuel, INCLUDING E-85 and METHANOL! Features: Made in the USA Adjustable from 3-80 psi Three 6AN ORB inlet/outlet ports 6AN ORB Return Port 1/8 hose barb for 1:1 vacuum/boost reference 1/8 NPT gauge port

• 1/8" hose barb for 1:1 vacuum/boost reference
• Three 6AN ORB inlet/outlet ports
• Adjustable from 3-80 psi
• 6AN ORB Return Port
• 1/8" NPT gauge port

If you're looking for an offshore piece of junk regulator, this product is not for you! If you're looking for the best performing regulator on the market that is designed and built in the USA from the highest quality components available, this is your regulator. Snow Performance's High Flow Billet Fuel Pressure Regulator sets itself apart from the competition with anodized billet aluminum internal components, a Fluorosilicone coated Nomex diaphragm, and a silicon nitride ceramic ball which will never corrode, making this regulator safe for any type of fuel. Combine all these features with a corrosion-resistant spring, and a black anodized CNC machined aluminum body, your result is a fuel pressure regulator that responds lightning fast to your vehicle's ever-changing fuel flow demands and is compatible with any type of fuel, INCLUDING E-85 and METHANOL! Features: Made in the USA Adjustable from 35-100psi Two 8AN ORB inlet/outlet ports 8AN ORB Return Port 1/8 hose barb for 1:1 vacuum/boost reference 1/8 NPT gauge port

• 1/8” hose barb for 1:1 vacuum/boost reference
• Two 8AN ORB inlet/outlet ports
• Adjustable from 35-100psi
• 8AN ORB Return Port
• 1/8" NPT gauge port