The Snow Performance Stage 1 Boost Cooler TD Water-Methanol Injection Kit (SNO-301) is engineered for high-boost and competition diesel applications to effectively lower Exhaust Gas Temperatures (EGTs) while increasing output by up to 65 HP. This system utilizes a 300 PSI UHO (Ultra High Output) pump and an adjustable boost pressure switch to deliver a precise water-meth mixture once a specific boost threshold—pre-set at 30 PSI—is reached.

Designed for easy installation and reliable performance under heavy throttle, the kit includes high-temp red nylon tubing and quick-connect fittings for secure, leak-free routing. The dual-nozzle configuration ensures optimal atomization, while the integrated LED alert system keeps the driver informed of system activation from the cabin.

• Performance Gains: Capable of increasing diesel output by 65+ HP while significantly reducing EGTs.
• High-Pressure Pump: 300 PSI UHO (Ultra High Output) pump provides superior atomization.
• Precision Engagement: Includes an adjustable 30 PSI Boost Hobbs Switch for customized system activation.
• Complete Reservoir System: 3-quart race-ready tank with high-flow check valve and quick-connect fittings.
• Heavy-Duty Components: Features red high-temperature nylon tubing for engine bay durability.
• MPN: SNO-301

Fits select 2008-2020 Chrysler 300, Dodge Challenger, Charger, and Magnum models equipped with 5.7L, 6.1L, or 6.4L engines and forced induction (supercharged or turbocharged).

The Snow Performance Stage 2 Boost Cooler is a technical solution for enthusiasts looking to safely run more boost and timing on pump gas. By injecting a water-methanol mixture proportionally to boost pressure, this system effectively increases your fuel's octane rating by up to 25 points while significantly reducing intake air temperatures. This results in a denser air charge and cleaner combustion chambers through the reduction of carbon build-up.

Central to this kit is the VC-50 progressive controller, an ISO 9001-manufactured 52mm gauge that doubles as a boost display and injection management hub. It features a 7-color OLED screen (Blue, White, Red, Yellow, Orange, Purple, Green) that provides real-time data on boost levels, injection percentage, and system health via fault codes. For maximum reliability under high-pressure conditions, this kit includes a vehicle-specific throttle body spacer, high-pressure stainless steel braided lines, and 4AN fittings, replacing standard push-to-connect nylon lines.

• VC-50 Progressive Controller (52mm gauge format) with 7-color OLED display
• Proportional injection based on boost pressure for precise delivery
• Stainless steel braided lines and 4AN fittings for superior reliability
• Custom water-methanol injection throttle body spacer plate included
• Increases effective pump gas octane by up to 25 points
• Designed for forced induction Hemi applications (5.7L / 6.1L / 6.4L)
• Manufactured in the USA
• Manufacturer Part Number: SNO-2170-BRD

Fits 2016-2020 Chevrolet Camaro LT1, SS, and ZL1 models (6.2L).

The Snow Performance Stage 2 Boost Cooler is a water-methanol injection system engineered specifically for forced induction Gen 6 Chevrolet Camaro engines. By injecting a water-methanol mix, this system effectively increases pump gas octane by up to 25 points, allowing you to safely run more boost and timing while maintaining a cooler, denser air charge. This kit includes high-reliability 4AN stainless steel braided lines and a custom throttle body spacer plate for a secure, leak-free installation.

Central to the system is the ISO 9001-manufactured VC-50 controller. This 52mm gauge-style unit proportionally adjusts injection volume based on real-time boost pressure, ensuring accurate delivery across the entire powerband for improved drivability. The integrated OLED screen offers seven selectable colors (Blue, White, Red, Yellow, Orange, Purple, Green) to match your factory gauges and displays boost, injection percentage, and system diagnostics.

• Manufacturer Part Number: SNO-2161-BRD
• VC-50 controller (52mm) with 7-color OLED display and boost gauge functionality
• Complete 4AN braided stainless steel line set for maximum durability
• Custom water-methanol injection throttle body spacer plate
• Progressive injection curve based on manifold boost pressure
• Compatible with forced induction (supercharged/turbocharged) LT1/LT4 applications
• Made in the USA

Fits 2011-2017 Ford F-150 (3.5L).

The Snow Performance Stage 2 Boost Cooler water-methanol injection system is engineered to optimize performance on Ford 3.5L EcoBoost engines. By injecting a water-methanol mixture proportionally to boost pressure, this system effectively increases pump gas octane by up to 25 points, achieving 116 octane fuel quality. This allows you to safely run more boost and timing while maintaining lower combustion temperatures and cleaning carbon build-up from the engine.

At the heart of the system is the VC-50 progressive controller, a 52mm gauge that integrates boost monitoring and injection control into one unit. The 7-color OLED screen displays boost, injection percentage, and system status, allowing you to match your truck's interior lighting. This kit is upgraded with stainless steel braided lines and 4AN fittings for a high-pressure, leak-free installation that exceeds the durability of standard plastic tubing.

• Progressive VC-50 controller with 7-color OLED display (Blue, White, Red, Yellow, Orange, Purple, Green)
• Includes vehicle-specific throttle body spacer plate for simplified nozzle mounting
• Stainless steel braided lines and 4AN fittings for superior reliability
• Proportional injection curve based on boost pressure for improved drivability
• ISO 9001 manufactured VC-50 controller for high precision
• Manufacturer Part Number: SNO-2133-BRD

Fits 2011-2017 Ford Mustang GT, Boss 302, and GT Premium models equipped with the 5.0L Coyote engine and forced induction (supercharged or turbocharged).

The Snow Performance Stage 2 Boost Cooler is a technical solution for forced induction 5.0L Coyote owners looking to manage intake temperatures and increase effective fuel octane. By injecting a water-methanol mist, this system can increase pump gas octane by up to 25 points, allowing for more aggressive timing and boost levels while protecting the engine from detonation. This kit is specifically designed for ease of installation, featuring a custom throttle body spacer plate that eliminates the need for drilling into intake pipes.

At the heart of the system is the VC-50 progressive controller, an ISO 9001 manufactured 52mm gauge that monitors boost pressure to proportionally adjust injection flow. The controller features a 7-color OLED screen (Blue, White, Red, Yellow, Orange, Purple, Green) that displays boost, injection percentage, and system status, including fault codes and low-level alerts. For maximum reliability under high pressure, this version of the kit replaces standard nylon tubing with stainless steel braided lines and 4AN fittings.

• Manufacturer Part Number: SNO-2132-BRD
• Increases effective pump gas octane to approximately 116
• VC-50 Controller: Combined boost gauge and progressive injection controller
• 7-color OLED display: Customizable to match factory Ford interior lighting
• High-pressure 300 PSI UHO pump for consistent atomization
• Stainless steel braided lines and 4AN fittings for leak-free performance
• Custom Mustang 5.0L throttle body spacer plate included
• Reduces carbon buildup in the combustion chamber
• Made in the USA

Engineered for forced induction applications, the Snow Performance Stage 2.5 Boost Cooler (SNO-211-BRD) is a progressive water-methanol injection system designed to significantly reduce air intake temperatures and increase effective fuel octane. This kit utilizes the VC-50 controller—a 52mm gauge-style interface that displays boost pressure and injection percentage while allowing for precise adjustment of engagement and delivery curves based on real-time boost pressure (1-50 PSI).

Constructed with durability in mind, the system features the Snow Performance Extreme Environment 300 PSI UHO pump and is 100% methanol resistant, utilizing stainless steel, nickel plating, hard anodizing, and EPDM seals. This kit includes -4AN fittings and stainless steel braided lines for secure engine-bay mounting of the pump and tank, providing a robust alternative to standard nylon tubing.

• VC-50 Controller: 52mm gauge with 7-color OLED screen (Blue, White, Red, Yellow, Orange, Purple, Green)
• UHO 300 PSI Water-Methanol Pump for high-pressure atomization
• Hyper-Sonic water-methanol nozzle and high-flow check valve
• Supports 1,000+ HP applications
• Includes -4AN fittings and stainless steel braided line
• Displays boost, injection percentage, low level, and fault codes
• ISO 9001 manufactured and made in the U.S.A.

The Snow Performance Stage 2 Boost Cooler is a progressive water-methanol injection system engineered specifically for forced induction engines, including turbocharged and centrifugal supercharger applications. This kit utilizes the VC-50 controller—a 52mm digital gauge that monitors boost pressure from 1 to 50 PSI and proportionally adjusts injection volume to match engine load. By atomizing a water-methanol mix into the intake tract, this system can reduce air inlet temperatures by up to 100 degrees and increase effective fuel octane by up to 25 points, supporting builds over 1,000 HP.

The included VC-50 controller features a 7-color OLED screen that displays boost levels, injection percentage, and system status, including low-level warnings and fault codes. For maximum reliability, the kit features the 300 PSI UHO (Ultra High Output) pump and is constructed from 100% methanol-resistant materials, including stainless steel, nickel plating, and hard anodizing.

• Progressive Injection: VC-50 controller (52mm) provides precise delivery based on real-time boost levels (1-50 PSI).
• High-Pressure Delivery: OEM-approved 300 PSI UHO pump ensures superior atomization.
• Durable Plumbing: Includes 4AN stainless steel braided lines for engine bay mounting.
• Advanced Monitoring: 7-color OLED display (Blue, White, Red, Yellow, Orange, Purple, Green) shows boost and injection percentage.
• Precision Components: Includes Hyper-Sonic nozzle and "S" engraved low-profile high-flow check valve and nozzle holder.

• Manufacturer Part Number: SNO-211
• Pump Rating: 300 PSI
• Controller Interface: 52mm Gauge / OLED Screen
• Fitting Style: 4AN / ACU-SEAL Compression
• Materials: Stainless Steel, Nickel Plating, Hard Anodizing, EPDM

Designed for all forced induction applications, the Snow Performance Stage 2 Boost Cooler® (SNO-210-BRD-T) is a progressive water-methanol injection system that increases effective pump gas octane by 25 points and reduces air temperatures by up to 100 degrees. This kit utilizes the 52mm VC-50 controller to proportionally inject fluid based on boost pressure (1-50 PSI), ensuring precise delivery across the entire RPM range for improved drivability and cooling.

This Stage 2 kit features high-pressure stainless steel braided 4AN lines and fittings, ideal for mounting the pump and a user-supplied tank within the engine bay. The included VC-50 controller doubles as a digital boost gauge with a 7-color OLED display (Blue, White, Red, Yellow, Orange, Purple, Green) and provides real-time data on injection percentage, low fluid levels, and system faults. The system is powered by the OEM-approved 300 PSI UHO pump, built with 100% methanol-resistant materials including stainless steel and hard anodizing.

• Fits all turbocharged and centrifugal supercharged vehicles.
• Supports 1,000+ HP applications.
• VC-50 progressive controller (52mm gauge) with adjustable start/full points.
• High-flow 300 PSI UHO pump and Hyper-Sonic water-methanol nozzle.
• Engraved low-profile check valve and nozzle holder.
• ACU-SEAL compression fittings and stainless steel braided 4AN lines.
• Digital boost reading from 1-50 PSI.
• Manufactured with ISO 9001 standards; Made in the USA.
• Includes: VC-50 Controller, 300 PSI UHO Pump, nozzle, SS braided lines, and mounting hardware.
• Note: This version does not include a reservoir tank.

Designed for all forced induction applications, the Snow Performance Stage 2 Boost Cooler water-methanol injection system provides significant cooling and octane enhancement for turbocharged and supercharged engines. This kit is capable of increasing effective octane by up to 25 points and reducing intake air temperatures by up to 100 degrees, supporting builds exceeding 1,000 HP.

Central to the Stage 2 system is the VC-50 progressive controller, a 52mm digital gauge that manages injection volume based on real-time boost pressure. The VC-50 features a 7-color OLED screen displaying boost, injection percentage, and secondary nozzle activation, allowing for precise adjustment of start and full engagement points. For durability in high-performance environments, this kit includes 4AN stainless steel braided lines and an OEM-approved 300 PSI UHO pump.

• VC-50 Progressive Controller (52mm) with 7-color OLED display
• Snow Performance 300 PSI UHO Water-Methanol Pump
• 4AN Stainless Steel Braided Lines and ACU-SEAL Compression Fittings
• Methanol-resistant construction (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
• Engraved low-profile high-flow check valve and nozzle holder
• Digital boost reading from 1-50 PSI
• Hyper-Sonic water-methanol nozzle included
• Manufactured in the USA
• Manufacturer Part Number: SNO-210-BRD

Designed for gasoline forced induction engines, the Snow Performance Stage 2.5 Boost Cooler water-methanol injection system significantly reduces intake air temperatures and increases effective pump gas octane. This system is engineered for street-driven turbocharged and centrifugal supercharged applications, providing the cooling and detonation suppression required to support over 1,000 HP.

The SNO-210 kit features the VC-50 controller, an ISO 9001 manufactured 52mm gauge that monitors boost from 1-50 PSI. The controller proportionally manages injection based on boost pressure, with adjustable start and full points to match your engine's specific requirements. The integrated OLED screen offers seven user-selectable colors to match OEM gauges and displays critical data including boost pressure, injection percentage, and system faults.

• 300 PSI UHO (Ultra High Output) water-methanol pump
• VC-50 52mm OLED progressive controller and digital boost gauge (1-50 PSI)
• 100% methanol-resistant materials: Stainless steel, nickel plating, hard anodizing, and EPDM
• Snow Performance Hyper-Sonic water-methanol nozzle and high-flow check valve
• ACU-SEAL water-methanol compression fittings
• Includes 1/4 inch high-temp nylon tubing and quick-connect hardware
• Made in the USA
• Manufacturer Part Number: SNO-210

The Snow Performance Stage 1 Boost Cooler (SNO-201-BRD) is a fixed-rate water-methanol injection system designed for forced induction vehicles. Ideal for low-to-medium boost applications (1-15 PSI) such as positive displacement superchargers or street-driven turbochargers, this kit provides a significant octane boost and effectively lowers intake air temperatures (IATs). The system utilizes an adjustable boost switch to trigger injection at a specific manifold pressure, maintaining a consistent flow until boost drops below the set point.

Built for durability in extreme environments, the kit features a 300 PSI UHO (Ultra High Output) pump and 100% methanol-resistant components, including EPDM seals and stainless steel hardware. This specific version includes 4AN stainless steel braided lines and ACU-SEAL compression fittings, making it ideal for engine bay mounting of the pump and reservoir.

• Manufacturer Part Number: SNO-201-BRD
• 300 PSI UHO Water-Methanol Pump for maximum atomization
• Stainless steel braided lines with 4AN fittings for secure plumbing
• Adjustable boost-activated switch (1-15 PSI range)
• Hyper-Sonic water-methanol nozzle and engraved high-flow check valve
• Methanol-resistant construction: Stainless steel, nickel plating, and hard anodizing
• Supports applications up to 1,000+ HP
• Made in the USA

The Snow Performance Stage 1 Boost Cooler (SNO-201) provides a reliable water-methanol injection solution for gas-powered forced induction engines. Designed for low-to-medium boost applications (1-15 PSI), this kit increases effective pump gas octane by up to 25 points, allowing for more aggressive timing and increased power while protecting against detonation. The system uses an adjustable mechanical boost switch to trigger a fixed injection rate once the set pressure threshold is met.

This kit is engineered for the extreme engine bay environment, featuring a 300 PSI Ultra High Output (UHO) pump and 100% methanol-resistant materials, including stainless steel, nickel plating, and hard anodizing. The included Hyper-Sonic nozzle ensures maximum atomization for efficient intake charge cooling. Suitable for street-driven turbochargers, centrifugal superchargers, and positive displacement blowers, this system supports builds exceeding 1,000 HP.

• 300 PSI UHO water-methanol pump with EPDM seals
• Adjustable boost switch for activation between 1-15 PSI
• Methanol-resistant hardware (Stainless Steel, Nickel Plating, Hard Anodizing)
• Snow Performance Hyper-Sonic water-methanol nozzle
• Low-profile high-flow check valve and nozzle holder
• 1/4-inch high-temp nylon tubing and ACU-SEAL compression fittings
• Supports 1,000+ HP applications
• Made in the USA
• Manufacturer Part Number: SNO-201

The Snow Performance Stage 2 Boost Cooler is a progressive water-methanol injection system engineered for all forced induction applications, including turbocharged and centrifugal supercharged engines. This kit utilizes the VC-20 engine-mount controller with a built-in Manifold Absolute Pressure (MAP) sensor to proportionally inject fluid based on real-time boost levels. By adjusting the start and full points, users can fine-tune the delivery curve to optimize cooling and octane enhancement across the entire powerband.

Constructed with 100% methanol-resistant materials, including stainless steel, nickel plating, hard anodizing, and EPDM seals, this system is designed for extreme environments. It features the OEM-approved 300 PSI Ultra High Output (UHO) pump and 4AN stainless steel braided lines for secure, high-pressure fluid delivery. This kit is capable of lowering air induction temperatures by up to 100 degrees and increasing effective pump gas octane by 25 points, supporting builds exceeding 1,000 HP.

• Snow Performance VC-20 Progressive Controller with integrated MAP sensor
• 300 PSI UHO Water-Methanol Pump for consistent atomization
• Stainless steel braided 4AN lines and ACU-SEAL compression fittings
• Hyper-Sonic Water-Methanol Nozzle for superior fluid misting
• Low-profile, high-flow check valve and nozzle holder with running "S" engraving
• Methanol-resistant internal components (Stainless Steel, Nickel Plating, EPDM)
• Supports 1,000+ HP applications
• Made in the USA
• Manufacturer Part Number: SNO-20010-T

Note: This kit does not include a fluid tank. For trunk-mount configurations, refer to part numbers SNO-40014-BRD or SNO-40012-BRD.

Designed for all forced induction applications, the Snow Performance Stage 2 Boost Cooler water-methanol injection kit provides significant intake air temperature reduction and a functional octane boost of up to 25 points. This system utilizes the VC-20 progressive engine-mount controller with a built-in Manifold Absolute Pressure (MAP) sensor to deliver water-methanol proportionally to boost pressure, ensuring optimal cooling and combustion stability across the powerband.

The SNO-20010-BRD kit includes high-strength stainless steel braided lines and 4AN fittings, specifically configured for engine-bay mounting of the pump and tank. The system is anchored by the OEM-approved 300 PSI Ultra High Output (UHO) pump, built with 100% methanol-resistant materials including stainless steel, nickel plating, and EPDM. This kit is ideal for street-driven turbo and centrifugal supercharger applications requiring reliable thermal management and increased timing headroom.

• VC-20 Engine Mount Progressive Controller with integrated MAP sensor
• 300 PSI UHO Water-Methanol Pump for extreme environments
• 4AN ACU-SEAL compression fittings and stainless steel braided line
• Hyper-Sonic Water-Methanol Nozzle for optimized atomization
• Engraved low-profile high-flow check valve and nozzle holder
• Supports applications up to 1,000+ HP
• Methanol-resistant EPDM, stainless steel, and hard-anodized construction
• Manufactured in the USA
• Manufacturer Part Number: SNO-20010-BRD

The Snow Performance Stage 2 Boost Cooler is a progressive water-methanol injection system engineered for gasoline-powered forced induction applications, specifically turbochargers and centrifugal superchargers. This kit effectively reduces air intake temperatures and increases effective fuel octane, allowing for higher boost levels and optimized ignition timing. The system utilizes a VC-20 progressive controller with an integrated Manifold Absolute Pressure (MAP) sensor to deliver precise fluid volume proportional to boost pressure, ensuring smooth engagement and improved drivability across the RPM range.

• VC-20 Controller: Adjustable progressive engine mount controller with built-in MAP sensor for accurate delivery.
• UHO Water-Methanol Pump: OEM-approved 300 PSI pump designed for extreme environments.
• Durability: 100% methanol-resistant construction featuring stainless steel, nickel plating, hard anodizing, and EPDM.
• Advanced Nozzle Tech: Includes Snow Performance Hyper-Sonic nozzle and an engraved low-profile nozzle holder.
• Fittings & Hardware: Equipped with ACU-SEAL compression fittings and a high-flow check valve to prevent siphoning.
• Performance: Supports forced induction builds up to 1,000+ HP.
• Manufacturing: Proudly made in the USA.

The SNO-20010 kit includes the 300 PSI UHO pump, VC-20 controller, 2.5-gallon reservoir, quick-connect fittings, and all necessary hardware for installation.

The Snow SNF-60889 is a high-performance adapter designed to transition a -8 ORB (O-Ring Boss) port to a -8AN male flare at a 90-degree angle. This swivel-style fitting is essential for plumbing fluid systems in confined spaces, allowing you to clock the fitting for perfect hose alignment after the ORB side is seated.

• Connection Type: -8 ORB to -8AN Male Flare
• Angle: 90-Degree Swivel for precise plumbing orientation
• Construction: High-grade materials with a black anodized finish for superior corrosion resistance
• Seal Method: O-Ring Boss (ORB) ensures a leak-free seal without the need for thread sealant
• Manufacturer Part Number: SNF-60889

Ideal for custom fuel, oil, or water-methanol injection setups, this fitting provides a secure, high-pressure connection while maintaining a clean, professional appearance in the engine bay.

The Snow 8AN Braided Stainless Steel PTFE Hose (SNF-60815B) is engineered for high-pressure fluid systems requiring maximum durability and chemical compatibility. The PTFE (Polytetrafluoroethylene) inner liner is highly resistant to degradation from aggressive fluids and high operating temperatures, ensuring long-term reliability where standard rubber lines often fail.

Constructed with a heavy-duty stainless steel outer braid, this hose provides exceptional protection against abrasion and prevents hose expansion under high pressure. The black finish offers a sleek, professional appearance for custom plumbing layouts. At 15 feet in length, it provides ample material for plumbing fuel, oil, or coolant systems across various vehicle platforms.

• Manufacturer Part Number: SNF-60815B
• Size: 8AN
• Length: 15 Feet
• Inner Liner: PTFE (Teflon)
• Outer Reinforcement: Braided Stainless Steel
• Finish: Black

Ensure reliable fuel delivery and maximum durability with the Snow Performance 8AN Braided Stainless Fuel Line Kit. Engineered for high-performance applications, this kit (part number SNF-60801B) provides a robust solution for plumbing your fuel system with components designed to withstand high operating pressures and harsh engine bay environments.

The braided stainless steel construction offers superior protection against abrasion and hose expansion, ensuring consistent flow under demand. Finished in a sleek black coating, this kit provides a professional, understated aesthetic while maintaining the strength of traditional stainless lines. It is an essential upgrade for builders moving beyond standard rubber lines to a more resilient 8AN architecture.

• Manufacturer Part Number: SNF-60801B
• Hose Size: 8AN
• Construction: Braided stainless steel for high-pressure integrity
• Finish: Stealth black outer coating
• Compatibility: Designed for use with 8AN fuel system components

Simplify your fluid plumbing with the Snow Performance -10 ORB to -10AN 90-degree swivel fitting. This adapter is designed to transition from a -10 O-Ring Boss (ORB) port to a standard -10AN flare, providing a secure, leak-free connection for fuel, oil, or water-methanol injection systems. The 90-degree swivel design allows for precise clocking and orientation after the port side is tightened, making it an essential component for plumbing in tight engine bays where clearance is limited.

• Fitting Style: 90 Degree Swivel Adapter
• Port Side: -10 ORB (O-Ring Boss)
• Line Side: -10AN Flare
• Finish: Black Anodized for corrosion resistance
• Construction: High-strength aluminum for durability under pressure
• Manufacturer Part Number: SNF-60119

The Snow Performance SNF-60108 is a precision-engineered straight adapter designed for secure, leak-free transitions in high-performance fluid systems. This fitting allows you to adapt a -10 ORB (O-Ring Boss) port to a -8AN flare connection, facilitating custom plumbing for fuel, oil, or water-methanol injection setups.

• MPN: SNF-60108
• Inlet Size: -10 ORB
• Outlet Size: -8AN
• Material: High-grade construction for high-pressure reliability
• Finish: Corrosion-resistant black anodized coating
• Design: Straight adapter configuration

Built to withstand the demands of performance environments, this fitting ensures a positive seal at the ORB port using an integrated O-ring seat while providing the industry-standard 37-degree flare for the AN side. The low-profile straight design is perfect for tight engine bays and clean plumbing routing.

The Snow Performance SNF-60001B 10AN fuel line kit provides a professional-grade plumbing solution for high-demand fuel and water-methanol injection systems. Engineered to handle high-pressure environments, this kit utilizes braided stainless steel for maximum hose integrity and resistance to expansion under load.

The black-coated finish offers a stealthy, clean aesthetic while providing an additional layer of protection against abrasion and engine bay heat. This kit is designed for builders who require the reliability of AN-style fittings and the durability of stainless steel plumbing for consistent fluid delivery.

• Manufacturer Part Number: SNF-60001B
• Line Size: -10AN
• Material: Braided stainless steel
• Finish: Black outer coating
• Application: Compatible with high-pressure fuel and water-methanol injection systems

Fits 2015-2021 Ford F-150 (King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT).

The Snow Performance SNF-52800X Xtreme Multi-Pump Fuel Hat provides a high-output fuel delivery solution for 2015-2021 Ford F-150 trucks. This assembly replaces the restrictive factory fuel hat with a CNC-machined 6061 billet aluminum manifold, eliminating the need for unreliable T-fittings, rubber hoses, and clamps that can fail under high pressure or deteriorate from harsh fuel exposure. Designed for return-style systems, this hat ensures a leak-free fit using Viton chemical-resistant O-rings.

• Construction: CNC-machined 6061 billet aluminum with a black anodized finish for superior corrosion resistance.
• Compatibility: Fully compatible with E85, E98, and 100% Ethanol blends.
• Pump Configuration: Equipped with three genuine TI Automotive (Walbro) high-flow fuel pumps.
• Port Specs: Features -10AN ORB female feed and -8AN ORB female return ports (fittings sold separately).
• OE Retention: Retains factory tank features including the EVAP system, filler neck, and fuel transfer pump functionality for saddle-style tanks.
• Hardware Included: Wiring harnesses for pumps and the fuel level sending unit.

Note: This unit is designed for return-style fuel systems only and must not be used in returnless applications. Does not include the fuel level sending unit or external fittings. Manufacturer Part Number: SNF-52800X.

Fits 2015-2021 Ford F-150 models including Raptor, King Ranch, Lariat, Platinum, XL, and XLT.

Eliminate the limitations of multi-pump fuel setups that rely on prone-to-fail T-fittings and rubber hoses. The Snow Performance Triple Pump Race Fuel Hat is a precision-engineered solution for high-horsepower Ford F-150 builds. CNC-machined in the USA from 6061 billet aluminum, this manifold replaces the entire factory fuel bucket, providing a secure mount for three high-output pumps without the need for hose clamps or plastic lines that deteriorate over time.

The black anodized finish ensures full compatibility with E85 and other harsh racing fuels while providing maximum corrosion resistance. This assembly retains critical factory functionality, including the EVAP system, filler neck, and fuel transfer pump on saddle-style tanks. It is designed to work with your original fuel level sending unit for a seamless integration into the vehicle's monitoring systems.

• CNC-machined 6061 billet aluminum construction
• Compatible with genuine TI Automotive (Walbro) fuel pumps
• Black anodized for E85 and alcohol fuel compatibility
• Features 10AN ORB female feed and 8AN ORB female return ports
• Chemical-resistant Viton O-rings for leak-free sealing
• Includes wiring harnesses for pumps and fuel level sending unit
• Retains factory EVAP and fuel transfer functionality
• Manufacturer Part Number: SNF-52800R

Note: Does not include fuel level sending unit or AN fittings. 90-degree swivel adapter fittings are required to adapt to 10AN, 8AN, or 6AN lines.

Fits select 2015-2021 Ford F-150 models including King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, Tremor, XL, and XLT.

The Snow Performance SNF-52800H Multi-Pump Fuel Hat provides a robust high-output fueling solution for forced induction or high-horsepower F-150 applications. CNC-machined in the USA from 6061 billet aluminum, this manifold design eliminates the need for failure-prone T-fittings, rubber hoses, and hose clamps within the tank. The black anodized finish ensures full compatibility with E85 and other corrosive racing fuels, while Viton chemical-resistant O-rings provide a secure, leak-free seal.

This triple pump assembly is designed to completely replace the factory fuel hat and bucket while retaining essential OE features. It supports your factory fuel level sending unit, EVAP system, filler neck, and saddle-tank fuel transfer functionality where applicable. For plumbing, the hat features a female 10AN ORB feed port and an 8AN ORB return port, allowing for high-volume flow without restriction.

• Manufacturer Part Number: SNF-52800H
• Construction: CNC-machined 6061 billet aluminum
• Finish: Corrosion-resistant black anodize (E85 compatible)
• Ports: 10AN ORB feed and 8AN ORB return
• Compatibility: Configurable for up to 3 TI Automotive (Walbro) 450LPH or 470LPH pumps
• Included: Wiring harnesses for pumps and fuel level sending unit
• Note: Does NOT include fuel level sending unit or AN fittings

Fits 2015-2021 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, SSV, Tremor, and Police Responder.

The Snow Performance SNF-52800 Multi-Pump Fuel Hat solves the common failures associated with high-output fuel system upgrades. By replacing unreliable T-fittings, hose clamps, and prone-to-deteriorate rubber lines with a precision-engineered 6061 billet aluminum manifold, this unit provides a secure, leak-free solution for high-horsepower F-150 builds. Each assembly is CNC-machined in the USA and finished in a black anodized coating for maximum corrosion resistance and full compatibility with E85 and other oxygenated fuels.

This dual-pump assembly is designed as a direct replacement for the factory fuel hat and bucket, allowing you to retain critical OE functions such as the fuel level sending unit, EVAP system, and fuel transfer pump for saddle-style tanks. The CNC-machined body utilizes chemical-resistant Viton O-rings to ensure a perfect seal under high pressure.

• Manufacturer Part Number: SNF-52800
• Material: 6061 Billet Aluminum with Black Anodized Finish
• Pump Type: Genuine TI Automotive (Walbro) High-Flow Pumps
• Feed Port: 10AN ORB Female
• Return Port: 8AN ORB Female
• Hardware: Includes Viton O-rings and pump wiring harnesses
• Installation: Replaces OE fuel hat; retains factory tank features and level sender mounting

Note: Fuel Level Sending Unit and AN fittings are not included. 90-degree swivel adapter fittings are recommended and sold separately.

Fits 2019-2025 GMC Canyon Denali and Sierra 1500 Denali.

Upgrade your high-output fueling system with the Snow Performance SNF-52710H Multi-Pump Fuel Hat. Engineered and CNC-machined in the USA from 6061 billet aluminum, this assembly replaces the factory fuel hat and bucket to support high-horsepower demands without the need for unreliable T-fittings, rubber hoses, or hose clamps. The manifold design features precision-machined internal passages and chemical-resistant Viton O-rings for a leak-free seal and maximum fuel flow.

This billet hat is finished in black anodizing for superior corrosion resistance, making it fully compatible with gasoline, E85, and E98 ethanol blends. The SNF-52710H is designed to retain essential factory features, including the OE fuel level sending unit (not included), EVAP system, filler neck, and saddle-style tank transfer pump functionality. Note: This assembly is designed for return-style fuel systems only and must not be used in returnless applications.

• Manufacturer Part Number: SNF-52710H
• Material: 6061 Billet Aluminum with black anodized finish
• Ports: Female 10AN ORB feed and 8AN ORB return
• Pump Compatibility: Configurable for 2 or 3 genuine TI Automotive (Walbro) 450LPH or 470LPH pumps
• Hardware: Includes wiring harnesses for pumps and fuel level sending unit
• Requirement: Requires return-style fuel system; 90-degree swivel adapter fittings sold separately

Please note: This kit does not include the fuel level sending unit or AN fittings.

Fits select 2005-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks (including Classic, HD, LD, and Limited models).

The Snow Performance Race Series Multi-Pump Fuel Hat provides a high-output fueling solution for high-horsepower GM half-ton trucks. Engineered to replace the restrictive factory fuel bucket, this assembly features a manifold CNC-machined from 6061 billet aluminum. By utilizing internal machined passages, this design eliminates the need for unreliable T-fittings, hose clamps, and rubber lines that often fail or deteriorate in high-performance applications. The assembly is finished in black anodizing for superior corrosion resistance and full compatibility with E85 and other oxygenated race fuels.

This triple-pump hat is designed for return-style fuel systems only and integrates seamlessly with your factory tank features. It retains the OE fuel level sending unit, EVAP system, filler neck, and fuel transfer functionality for saddle-style tanks. All pump mounts use chemical-resistant Viton O-rings to ensure a leak-free seal under high pressure.

• Material: CNC-Machined 6061 Billet Aluminum
• Finish: Black Anodized for E85/Methanol compatibility
• Feed Port: 10AN ORB (Female)
• Return Port: 8AN ORB (Female)
• Pumps: Supports up to 3 genuine TI Automotive (Walbro) fuel pumps
• Hardware: Includes wiring harnesses for pumps and fuel level sending unit
• Compatibility: Requires return-style fuel system conversion
• Origin: Built in the USA
• MPN: SNF-52700R

Note: Fuel level sending unit and 90-degree swivel adapter fittings are sold separately.

Fits select 2005-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks, including HD, LD, Classic, and Limited models.

The Snow Performance SNF-52700H Multi-Pump Fuel Hat provides a high-output fueling solution for high-horsepower GM half-ton trucks. Engineered to replace the factory fuel hat assembly, this unit features a triple-pump manifold CNC-machined from 6061 billet aluminum. By utilizing internal machined passages and Viton chemical-resistant O-rings, it eliminates the need for failure-prone hose clamps and rubber or plastic lines that often deteriorate in harsh fuel environments.

This fuel hat is designed for durability and ease of installation, retaining essential factory features such as the fuel level sending unit (not included), EVAP system, filler neck, and saddle tank fuel transfer pump functionality where applicable. The black anodized finish ensures long-term corrosion resistance, making the assembly fully compatible with E85 and race fuels.

• Construction: 6061 Billet Aluminum with Black Anodized finish
• Configuration: Triple Pump (Manifold accommodates 2 or 3 pumps)
• Ports: 10AN ORB Feed and 8AN ORB Return
• Pump Compatibility: Designed for genuine TI Automotive (Walbro) 450LPH or 470LPH pumps
• Included: Pump wiring harnesses and fuel level sending unit harness
• Notes: Does NOT include fuel level sending unit or fittings (90-degree swivel adapters sold separately)
• MPN: SNF-52700H

Fits select 2005-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks, including Classic, HD, LD, and Limited models.

The Snow Performance SNF-52700 Multi-Pump Fuel Hat provides a high-output fueling solution for high-horsepower GM half-ton trucks. Engineered to replace the factory fuel bucket, this assembly eliminates the need for unreliable T-fittings, hose clamps, and rubber lines that often deteriorate in performance applications. Each hat is CNC-machined in the USA from 6061 billet aluminum with integrated internal passages for a clean, leak-free design.

This dual-pump assembly features a black anodized finish for superior corrosion resistance, making it fully compatible with E85 and other oxygenated fuels. The manifold is designed to retain critical OE tank features, including the fuel level sending unit, EVAP system, filler neck, and saddle-tank fuel transfer functionality. These units utilize genuine TI Automotive (Walbro) fuel pumps to ensure OE-level reliability and consistent flow for return-style fuel systems.

• CNC-machined 6061 billet aluminum construction with black anodized finish
• Viton chemical-resistant O-rings for a secure, leak-free seal
• Female 10AN ORB feed port and 8AN ORB return port
• Retains factory fuel level sender and EVAP system components
• Includes dedicated wiring harnesses for fuel pumps and level sender
• Compatible with genuine TI Automotive 450LPH or 470LPH pumps
• Designed for return-style fuel systems only; not for returnless use
• MPN: SNF-52700

Note: Fuel level sending unit and 90-degree swivel adapter fittings are not included and must be sourced separately.

Fits select 2011-2024 Ford Mustang models, including Base, GT, EcoBoost, Shelby GT350/GT500, Mach 1, Bullitt, and Dark Horse.

Engineered for high-horsepower builds, the Snow Performance Race Version Multi-Pump Fuel Hat replaces the restrictive factory fuel bucket with a high-flow, 6061 billet aluminum manifold. This CNC-machined assembly eliminates common failure points like unreliable T-fittings, hose clamps, and plastic lines that deteriorate over time. The internal manifold design provides secure pump mounting with Viton chemical-resistant O-rings for a leak-free seal.

Designed specifically for return-style fuel systems, this fuel hat is compatible with 100% gasoline, E85, and ethanol blends. It features 10AN ORB feed and 8AN ORB return ports while retaining critical factory functionality, including the EVAP system, filler neck, fuel level sending unit (not included), and saddle-tank fuel transfer functionality.

• Precision CNC-machined from 6061 billet aluminum
• Durable black anodized finish for corrosion resistance
• Configured for a 3-pump setup (Genuine TI Automotive/Walbro)
• Retains OE fuel level sending unit and EVAP functionality
• Female 10AN ORB feed and 8AN ORB return ports
• Includes wiring harness for pumps and sending unit
• Manufacturer Part Number: SNF-52601R