The Snow Performance SNO-815-BRD is a premium 15ft braided stainless steel line designed for high-pressure fluid transfer in water-methanol or nitrous injection systems. This "NX Version" features a sleek black protective coating over the stainless braid, offering a professional, stealthy appearance under the hood or along the chassis while providing superior abrasion resistance.

Equipped with pre-crimped -4AN fittings on both ends, this line ensures a secure, leak-free connection capable of withstanding the high PSI demands of performance injection systems. The 15ft length is ideal for plumbing systems from a rear-mounted reservoir to the engine bay. The internal liner is compatible with water, methanol, and nitrous, ensuring long-term durability without degradation.

• Part Number: SNO-815-BRD
• Length: 15 Feet
• Material: Braided Stainless Steel
• Finish: Black Coating
• Fitting Size: -4AN
• High-pressure rated for water-meth and nitrous applications

The Snow Performance Low Pressure Safety Switch (SNO-81083-BRD) provides a critical failsafe for your water-methanol injection system. Designed to monitor fluid pressure between the pump and the injection nozzles, this kit protects your engine by detecting failures caused by a worn pump, clogged nozzle, or ruptured line.

This user-adjustable switch can be configured to trigger a high-intensity LED alert or wired directly into an aftermarket EFI system or electronic boost controller. When pressure drops below the set threshold, it can signal the ECU to pull timing, reduce boost, or switch to a safe map to prevent engine damage.

• Adjustable Pressure Range: User-adjustable from 35 to 100 PSI for precise system tuning.
• System Monitoring: Includes a Snow Performance water-methanol pressure gauge for visual verification.
• Premium Plumbing: Features an inline adapter manifold specifically for -4AN stainless steel braided lines.
• Safety Integration: High-intensity LED included for immediate driver notification; compatible with most aftermarket EFI and boost controllers.
• Part Number: SNO-81083-BRD

The Snow Performance Low Pressure Safety Switch SNO-81083 serves as a critical failsafe for your water-methanol injection system. Designed to monitor fluid pressure between the pump and the injection nozzles, this switch identifies performance drops caused by pump failure, line ruptures, or electrical issues. If the system fails to maintain the correct pressure during activation, the kit alerts the driver immediately.

This adjustable switch is engineered for versatility. Use the included high-intensity LED for a simple dashboard warning, or wire the switch directly into an aftermarket EFI system or electronic boost controller to trigger automated safety protocols, such as cutting boost or retarding ignition timing. The kit includes an integrated pressure gauge to provide real-time diagnostic feedback during tuning and operation.

• User-adjustable pressure safety switch range: 35–100 PSI
• Includes Snow Performance water-methanol pressure gauge
• High-intensity LED for immediate driver notification
• Inline adapter manifold for -4AN lines
• Suitable for integration with EFI systems and boost controllers
• Manufacturer Part Number: SNO-81083

Ensure precise activation of your water-methanol injection system with the Snow Performance SNO-81014 Adjustable Boost Switch. This high-reliability pressure switch is specifically designed as a replacement component for the SNO-201 kit, allowing you to fine-tune the exact point at which your system begins to spray based on manifold pressure. It is an essential component for drag racing and positive displacement supercharged applications where immediate cooling and octane enhancement are required under load.

• Adjustable trigger range: 2-15 PSI
• Optimized for positive displacement superchargers and high-load drag race setups
• Direct replacement component for Snow Performance SNO-201 systems
• Built for consistent switching performance under high-boost conditions
• Manufacturer Part Number: SNO-81014

The Snow Performance SNO-810-QC nozzle holder provides a secure, leak-free interface for your water-methanol injection system. This low-profile straight fitting is specifically engineered to connect water-meth nozzles to 1/4-inch high-temperature nylon tubing, offering a compact solution for plumbing in tight engine bays where clearance is limited.

• Adapts 1/8-inch NPT nozzles to 1/4-inch High Temp Nylon Tubing
• Low-profile straight configuration for streamlined plumbing
• Quick-connect design for fast, secure installation and maintenance
• Built to handle the pressures of water-methanol injection systems
• Manufacturer Part Number: SNO-810-QC

The Snow Performance Low Profile Straight Nozzle Holder (SNO-810-BRD) provides a secure, high-pressure connection between a water-methanol injection nozzle and a 4AN stainless steel braided line. This specialized fitting replaces standard push-to-connect hardware, allowing for a more robust plumbing solution in high-performance or high-boost environments.

Designed for tight engine bays where clearance is a priority, the low-profile straight configuration ensures a clean installation into the intake tract or charge pipe. Its construction is engineered for full compatibility with water-methanol mixtures, preventing corrosion and ensuring long-term seal integrity.

• Fitting Type: Straight nozzle holder
• Inlet: 4AN Male
• Outlet: 1/8in NPT Female (fits standard nozzles)
• Design: Low-profile for limited clearance applications
• Construction: Methanol-resistant materials for maximum durability
• Part Number: SNO-810-BRD

The Snow Performance 90-degree nozzle holder is a specialized plumbing solution designed to facilitate water-methanol nozzle installation in engine bays with limited clearance. This low-profile elbow allows you to mount your injection nozzle in tight intake tracts where a standard straight holder would interfere with hoods, firewalls, or other accessories.

• 90-degree elbow design optimizes hose routing and reduces stress on nylon lines
• 1/8-inch NPT male thread fits standard nozzle bungs and intake plates
• 1/4-inch OD quick-connect fitting provides a secure, leak-free seal for 1/4" tubing
• Durable construction with a black finish for a clean, professional look and corrosion resistance
• Directly compatible with Snow Performance water-methanol injection systems
• Manufacturer Part Number: SNO-809-QC

The Snow Performance Low Profile Water Nozzle Holder (SNO-809-BRD) allows you to securely plumb your water-methanol injection system using 4AN stainless steel braided lines. This 90-degree elbow fitting is specifically engineered for applications with tight clearance requirements, providing a compact footprint for the nozzle assembly without compromising fluid delivery.

By converting the standard 1/8-inch NPT nozzle thread to a 4AN male flare, this holder ensures a high-pressure seal that is significantly more robust than traditional push-to-connect plastic fittings. It is a professional-grade solution for enthusiasts upgrading to braided line setups for improved long-term durability and heat resistance in the engine bay.

• Connection Type: 1/8in NPT Female to 4AN Male
• Fitting Geometry: 90-Degree Low Profile Elbow
• Application: Water-Methanol Injection Systems
• Compatibility: Accepts all standard 1/8in NPT injection nozzles
• Manufacturer Part Number: SNO-809-BRD

Ensure a secure, leak-free connection for your injection system with Snow Performance 20ft Black High Temp Nylon Tubing. Engineered to handle the specific demands of high-pressure water-meth delivery, this 1/4" OD line is 100% methanol resistant, ensuring it won't degrade or become brittle when running high-concentration mixtures.

This high-temperature nylon tubing is designed for easy routing through the engine bay and is compatible with all water-methanol injection kits that utilize standard 1/4" quick-connect fittings. Whether you are replacing a worn line or plumbing a new installation, this SNO-8088 tubing provides the chemical resistance and thermal stability required for performance applications.

• Length: 20 Feet
• Diameter: 1/4" OD
• Material: High-temperature nylon
• Chemical Resistance: 100% methanol resistant
• Fitment: Compatible with 1/4" quick-connect fittings
• Manufacturer Part Number: SNO-8088

Ensure the integrity of your water-methanol injection system with this 20-foot roll of Snow Performance High Temp Nylon Tubing (SNO-8087). Engineered specifically for the demanding environment of performance fueling, this 1/4-inch OD tubing is 100% methanol resistant and designed to withstand high under-hood temperatures without degrading or becoming brittle.

• Manufacturer Part Number: SNO-8087
• Length: 20 Feet
• Diameter: 1/4-inch
• Color: Red
• Material: High-temperature resistant Nylon
• Compatibility: All water-methanol injection kits using 1/4" quick-connect fittings
• Chemical Resistance: 100% methanol resistant

This tubing provides a reliable, leak-free connection when used with standard quick-connect fittings, making it an essential component for custom plumbing or replacing worn lines in your injection setup.

The Snow Performance SNO-808-BRD is a specialized 90-degree elbow fitting designed to bridge the connection between a water-methanol reservoir and 4AN stainless braided lines. This adapter features a 3/8" NPT thread for the tank side and a 4AN flare for secure line attachment, providing a clean plumbing solution for tight engine bays or trunk-mount configurations.

Constructed for durability in high-performance injection systems, this fitting is finished in black anodizing to provide 100% resistance to pure methanol and water-meth mixtures. This finish prevents oxidation and corrosion, ensuring that the injection path remains free of debris.

• Manufacturer Part Number: SNO-808-BRD
• Fitting Style: 90-Degree Elbow
• Thread Sizes: 3/8" NPT to 4AN
• Material: Anodized Aluminum
• Compatibility: 100% Methanol Resistant
• Finish: Black

The Snow Performance 4AN T-Fitting (SNO-806-BRD) provides a secure, leak-free solution for splitting fluid lines or integrating additional sensors into your water-methanol injection system. Engineered to handle high-pressure environments, this adapter is essential for multi-nozzle configurations or custom plumbing layouts.

Crafted for durability and precision, the fitting features a clean black anodized finish that protects against corrosion while maintaining a professional look in the engine bay. The 4AN sizing ensures a direct match for standard braided or nylon lines common in performance cooling and injection setups.

• Part Type: 4AN T-Fitting
• Finish: Black Anodized
• MPN: SNO-806-BRD
• Application: Water-methanol injection and high-pressure fluid systems
• Configuration: 3-way male AN flare junctions

Upgrade your water-methanol injection system with this heavy-duty Snow Performance 1-foot braided line. Engineered for durability and high-pressure performance, this line features a black-finished stainless steel exterior that protects against abrasion and engine bay heat. Unlike standard nylon tubing, the EPDM inner core is 100% methanol resistant, ensuring long-term reliability without degradation or leaks.

This line comes pre-terminated with high-quality 4AN fittings to provide a secure, mechanical connection to your pump, solenoid, or nozzle holder. It is an ideal solution for short-run plumbing where maximum protection and a professional look are required.

• Length: 1 foot (1')
• Fitting Type: 4AN
• Core Material: Methanol-resistant EPDM
• Reinforcement: Stainless steel braid
• Finish: Black
• 100% Methanol Resistant
• Manufacturer Part Number: SNO-805-BRD

Ensure a secure, leak-free connection in your water-methanol injection system with this Snow Performance straight adapter fitting. This component allows for a seamless transition between standard 1/8in NPT ports and -4AN braided lines, providing a more robust alternative to standard plastic push-to-connect hardware in high-pressure applications.

The SNO-804-BRD is designed for maximum durability in methanol-rich environments. Its precision-machined threads ensure a tight seal at the pump, nozzle, or tank, while the black finish provides superior corrosion resistance and a clean look for your plumbing setup.

• Type: Straight Adapter Fitting
• Size A: 1/8in NPT (Male)
• Size B: -4AN (Male)
• Finish: Black
• Application: Water-Methanol Injection Systems
• Manufacturer Part Number: SNO-804-BRD

This Snow Performance straight water fitting provides a secure, leak-free connection for your water-methanol injection system. Engineered to adapt a 3/8in NPT port to a 4AN braided line, this adapter is essential for custom plumbing configurations or replacing factory hardware in high-pressure fluid applications.

• Configuration: Straight
• Thread A: 3/8in NPT
• Thread B: 4AN
• Finish: Black
• MPN: SNO-803-BRD

Precision-machined for exact tolerances, this fitting ensures reliable fluid delivery under the high-pressure demands of methanol injection. It is designed to work with reservoirs, pumps, or solenoids utilizing a standard 3/8in NPT inlet/outlet.

Upgrade your water-methanol injection system with this Snow Performance 2-foot stainless steel braided line. Designed for high-pressure performance, this line features an internal EPDM core that is 100% methanol resistant, preventing the degradation commonly found in standard rubber hoses. The black-coated stainless steel braiding provides superior abrasion resistance and a professional, stealthy aesthetic in the engine bay.

This line comes pre-terminated with 4AN fittings to provide a secure, leak-free connection that is significantly more durable than traditional push-to-connect plastic lines, especially in high-vibration or high-heat environments. It is compatible with all Snow Performance kits and other water-meth systems utilizing 4AN hardware.

• Length: 2 Feet
• Material: Stainless Steel Braid with EPDM Inner Core
• Resistance: 100% Methanol Resistant
• Fittings: 4AN Female Ends
• Finish: Black
• Manufacturer Part Number: SNO-801-BRD

Monitor your water-methanol injection system's status with the Snow Performance Green LED Indicator. This panel-mount light provides clear, instant visual confirmation of system activation or pump operation, allowing you to track performance directly from the driver’s seat. It serves as an essential diagnostic tool to ensure your injection system is functioning correctly during high-load conditions.

Designed for seamless integration into any Snow Performance water-methanol kit, this accessory is built for longevity and easy dashboard installation. The bright green illumination is designed to be visible in all lighting conditions, providing the driver with immediate feedback without the need for complex gauges.

• Provides real-time visual feedback of system or pump activation
• High-visibility bright green LED for clear status monitoring
• Compact design for clean, professional dashboard or panel mounting
• Compatible with Snow Performance water-methanol injection systems
• Manufacturer Part Number: SNO-80003

The Snow Performance SNO-800-BRD is a premium 5-foot stainless steel braided line specifically engineered for high-performance water-methanol injection systems. Featuring a durable EPDM inner core, this line is 100% methanol resistant, preventing the swelling or degradation often encountered with standard rubber hoses when exposed to high-concentration methanol mixtures.

Constructed to withstand high-pressure demands and harsh engine bay environments, the stainless steel outer braid provides superior abrasion resistance and heat shielding. The black finish and 4AN fittings ensure a clean, professional appearance and secure, leak-free integration into your existing injection plumbing.

• Manufacturer Part Number: SNO-800-BRD
• Length: 5 Feet
• Fitting Size: 4AN
• Core Material: EPDM (100% Methanol Resistant)
• Outer Material: Braided Stainless Steel
• Finish: Black

The Snow Performance VC-50 Stage 2 Power Max Water-Methanol Controller (SNO-60500) integrates a progressive injection controller, fail-safe monitor, and boost gauge into a single 52mm gauge unit. This multi-functional tool utilizes a built-in Manifold Absolute Pressure (MAP) sensor to deliver proportional water-methanol injection based on real-time boost pressure. By adjusting the start and full points, you can precisely match fluid delivery to your engine's specific requirements.

The unit features a high-visibility OLED screen with a dual-tone display and seven user-selectable colors (white, green, blue, red, orange, purple, and yellow). The interface provides immediate feedback on boost levels, injection percentage, second-stage activation, and fault codes, while also including a low-level alert for reservoir management.

• 52mm (2-1/16 inch) gauge size for standard pod mounting
• Integrated 1-50 PSI boost gauge functionality
• Progressive injection delivery controlled by manifold pressure
• Includes a 0-100 PSI external pressure sensor
• Dual-tone 7-color OLED display for customized visibility
• On-unit prime and test button for easy system troubleshooting
• ISO 9001 manufactured and SEMA award-winning design
• Black bezel included for a clean interior finish
• Manufacturer Part Number: SNO-60500

The Snow Performance VC-30 is a boost-referenced water-methanol injection controller designed to provide precise fluid delivery based on manifold pressure. By monitoring boost levels via the included MAP sensor, this unit ensures your engine receives the correct volume of water-meth to effectively lower intake air temperatures (IATs) and suppress detonation under heavy load.

This controller is a critical component for forced induction setups looking to optimize ignition timing and boost levels safely. The package comes complete with the necessary wiring harnesses to integrate into your existing injection system, ensuring a reliable electrical connection and straightforward installation.

• Manufacturer Part Number: SNO-60400
• Reference Type: Boost-based (MAP sensor)
• Includes: VC-30 controller unit, MAP sensor, and full wiring harnesses
• Application: Compatible with most universal water-methanol injection systems

The Snow Performance Stage 3 Boost Cooler is a comprehensive water-methanol injection system engineered specifically for 2001-2020 Chevrolet Silverado/Express and GMC Sierra/Savana trucks equipped with the 6.6L Duramax diesel engine. This kit is designed to significantly lower Exhaust Gas Temperatures (EGTs) by 100°F to 300°F, making it an essential upgrade for diesel owners who frequently tow heavy loads or operate in demanding environments.

At the core of this system is a 2D mapped digital controller that monitors both boost pressure and EGTs to precisely command injection. This dual-input approach ensures the optimal volume of water-methanol is delivered to maintain cool intake temperatures and prevent heat soak. The system also delivers a performance increase of 65+ HP, assisting with heavy towing on steep grades while simultaneously cleaning internal engine components of carbon buildup and reducing emissions by decreasing regeneration cycles.

The kit includes a high-capacity 7-gallon tank for extended range between refills and a non-invasive dash-mounted controller that doubles as a boost gauge and EGT monitor. Designed for maximum reliability, the system features four fault modes to detect clogged or broken lines, pump issues, or solenoid failures. Importantly, this system does not leave a footprint on the factory ECU, keeping your vehicle warranty intact.

• Fits select 2001-2020 Chevrolet Silverado/Express and GMC Sierra/Savana (6.6L Duramax)
• 2D mapped controller based on Boost and EGT inputs
• Includes 7-Gallon tank for extended towing range
• Reduces EGTs by 100-300°F and increases power by 65+ HP
• New Prime feature ensures lines are ready at the push of a button
• 4 built-in fault modes for system monitoring
• Made in the USA
• Manufacturer Part Number: SNO-530

Fits select 1993-2020 Ford E-350, Excursion, and F-250/F-350 Super Duty models (7.3L / 6.0L / 6.4L / 6.7L Powerstroke).

The Snow Performance Stage 3 Boost Cooler is the ultimate EGT-management solution for Ford Powerstroke owners who demand performance while towing heavy loads. This water-methanol injection system uses a sophisticated 2D mapped controller that monitors both boost pressure and exhaust gas temperatures (EGT) to deliver the precise amount of fluid needed. By injecting a finely atomized mist into the intake air stream, this kit can reduce EGTs by 100-300°F, protecting your engine while adding over 65 horsepower to tackle steep grades with confidence.

Designed for daily drivers and heavy-duty towing rigs, the Diesel Stage 3 system features a non-invasive digital controller that mounts easily to the steering column or dash, doubling as a boost gauge and EGT monitor. The included 7-gallon tank provides extended range for long-haul trips, while the new Prime feature allows you to purge air from the lines at the push of a button. This system cleans carbon build-up from combustion chambers and reduces emissions, helping to minimize regen cycles on late-model trucks.

• Manufacturer Part Number: SNO-520
• Includes high-capacity 7-gallon tank for long-range towing
• 2D mapped controller (Boost + EGT) for precise injection
• Expect 65+ HP gains and significant EGT reduction
• Cleans engine internals and reduces emissions
• Non-invasive installation; does not leave a signature on the vehicle
• Equipped with 4 fault modes for clogged or broken lines
• Made in the USA

Fits select 2007-2020 Dodge Ram 2500 and 3500 models equipped with the 6.7L Cummins diesel engine.

The Snow Performance Stage 3 Boost Cooler is a comprehensive water-methanol injection system engineered to manage heat and optimize combustion in heavy-duty towing and performance applications. By utilizing a 2D mapped digital controller that monitors both boost pressure and Exhaust Gas Temperatures (EGTs), the system delivers precise injection to lower inlet temperatures and reduce EGTs by 100-300°F. This allows for safe power gains of 65+ HP while maintaining engine longevity and cleaning internal components of carbon build-up.

The included digital controller provides a non-invasive installation, mounting directly to the steering column or dash to function as a boost gauge, water-meth controller, and EGT monitor in one unit. For long-distance reliability, this kit features a high-capacity 7-gallon reservoir, ensuring you have enough fluid for extended hauls under load.

• Provides 65+ HP gains and reduces EGTs by 100-300°F
• 2D mapped digital controller monitors boost and EGTs for precision delivery
• Prime feature ensures fluid is in the lines at the push of a button
• Includes a 7-gallon tank for extended range during towing
• Advanced safety monitoring with 4 fault modes: clogged line, broken line, pump, and solenoid
• Reduced emissions and fewer regen cycles on DPF-equipped trucks
• Does not leave a signature on the vehicle computer for warranty peace of mind
• Manufacturer Part Number: SNO-510

The Snow Performance Stage 3 Boost Cooler is a comprehensive water-methanol injection system engineered for universal turbo diesel applications. Designed specifically for heavy-duty towing and high-performance diesel use, this kit effectively reduces Exhaust Gas Temperatures (EGTs) by 100–300°F, helps prevent carbon build-up in the combustion chamber, and can provide gains of over 65 horsepower by optimizing air inlet temperatures.

This system features a sophisticated 2D mapped controller that monitors both boost pressure and EGTs to delivery precise injection volume. The controller doubles as a multi-functional gauge, displaying boost, EGTs, and injection status while mounting non-invasively to your dash or steering column. For long-distance reliability, this kit includes a high-capacity 7-gallon tank and durable stainless steel braided lines with 4AN fittings to prevent leaks and withstand the rigors of high-pressure operation.

• Fits universal turbo diesel engines.
• C.A.R.B. E.O. #D-723 (50-State Legal).
• Reduces EGTs by 100–300°F and reduces emissions (fewer regen cycles).
• 2D mapped controller monitors boost and EGT for precise fluid delivery.
• New Prime Feature ensures lines are charged with a single button press.
• Four distinct fault modes for line clogs, breaks, pump, or solenoid issues.
• Includes 7-gallon tank, stainless braided lines, and 4AN fittings.
• Made in the USA.
• Manufacturer Part Number: SNO-50100-BRD

The Snow Performance Stage 3 Boost Cooler is engineered for turbo diesel owners who prioritize engine longevity and performance while towing heavy loads. This comprehensive water-methanol injection system utilizes a sophisticated 2D mapped controller to precisely manage injection based on real-time boost pressure and Exhaust Gas Temperatures (EGTs). By maintaining colder intake air temperatures, this kit can reduce EGTs by 100-300°F and provide gains of over 65 horsepower, making it easier to maintain speed on steep grades.

• Advanced Controller: The multi-functional 2D mapped controller mounts to the dash or steering column, serving as a boost gauge, EGT monitor, and injection controller with no drilling required.
• Safety Features: Includes four distinct fault modes to detect clogged lines, broken lines, pump issues, or solenoid failure, along with a new "Prime" button for instant line clearing.
• Towing Ready: Features a large 7-gallon tank for extended range during long hauls and heavy towing applications.
• Emissions & Warranty: 50-state legal (C.A.R.B. E.O. #D-723) and designed to leave no electronic signature on the vehicle, keeping factory warranties intact.
• Installation Hardware: Equipped with Red Hi-Temp tubing and quick-connect fittings for a secure, professional-grade install.
• MPN: SNO-50100

Fits 1989-1993 Dodge D250/D350/W250/W350 and 1994-2009 Dodge Ram 2500/3500 models equipped with the 5.9L engine.

The Snow Performance Stage 3 Boost Cooler is a precision-engineered water-methanol injection system designed for Dodge 5.9L Cummins owners who demand lower EGTs and increased towing performance. This kit utilizes a sophisticated 2D mapped controller that monitors both boost pressure and exhaust gas temperatures (EGT) to deliver a precise fluid curve. By maintaining cold air inlet temperatures, this system helps protect engine longevity while providing the extra power needed for heavy hauling and steep grades.

The Diesel Stage 3 controller is designed for a non-invasive installation, mounting directly to the steering column or dashboard without requiring interior drilling or additional gauge pods. It functions as a boost gauge, EGT monitor, and water-meth controller in a single unit. This kit includes a high-capacity 7-gallon tank, making it ideal for long-distance towing where frequent refills are impractical.

• Performance: Delivers 65+ HP gains and reduces EGTs by 100-300°F.
• Advanced Control: 2D mapping based on boost and EGT signals for optimized injection.
• Integrated Safety: Features 4 fault modes to alert the driver of clogged lines, broken lines, pump issues, or solenoid failure.
• Prime Feature: New prime button ensures fluid is present in the lines immediately when needed.
• Installation: Dash or steering column mounted controller; no drilling required for the interior interface.
• Components: Includes high-pressure pump, 2D controller, and 7-gallon reservoir.
• Manufacturing: Made in the USA.
• Part Number: SNO-500

Increase your fluid capacity and simplify your installation with the Snow Performance 2.0 gallon water-methanol reservoir. Engineered for durability and space efficiency, this tank is constructed from high-strength composite material and features an integrated mounting base designed specifically to house your water-methanol pump directly on the tank.

By mounting the pump directly to the reservoir, you minimize the footprint of your injection system and reduce the length of the supply line, ensuring a cleaner engine bay and more efficient packaging. This tank is a direct upgrade for enthusiasts looking for extended range between refills compared to standard small-capacity reservoirs.

• Capacity: 2.0 Gallons
• Material: High-strength composite construction
• Mounting: Built-in pump mount base for integrated installation
• Manufacturer Part Number: SNO-4530
• Note: Water-methanol pump is not included and must be purchased separately.

The Snow Performance Stage 2 Boost Cooler is a universal water-methanol injection solution engineered for turbo diesel trucks. This progressive system effectively lowers Exhaust Gas Temperatures (EGTs) by 100-300 degrees and provides a performance increase of over 65 horsepower by improving combustion efficiency and cooling the intake charge. By proportionally injecting based on boost pressure, the kit ensures an accurate delivery curve for improved drivability across the entire power band.

Central to the SNO-450 kit is the VC-50 controller, a 52mm gauge that integrates boost monitoring and injection control into a single unit. The 7-color OLED screen (Blue, White, Red, Yellow, Orange, Purple, Green) displays real-time boost, injection percentage, and secondary nozzle activation. This system also features advanced safety diagnostics and a dedicated prime button to ensure the lines are ready for immediate delivery.

• Fits universal turbo diesel applications
• VC-50 progressive controller (52mm gauge) with 7-color OLED display
• High-capacity 7-gallon reservoir tank for extended range
• Reduces EGTs by 100-300°F and adds 65+ HP
• 4 diagnostic fault modes (Clogged Line, Broken Line, Pump, Solenoid)
• Cleans engine carbon buildup and reduces regen frequency
• Dual nozzle injection capability for precise atomization
• Includes prime feature for easy system maintenance
• Made in the USA
• Manufacturer Part Number: SNO-450

Fits select 1993-2020 Ford F-250, F-350, E-350, and Excursion (7.3L / 6.0L / 6.4L / 6.7L Powerstroke).

Lower exhaust gas temperatures (EGTs) by 100-300°F and increase performance by 65+ horsepower with the Snow Performance Stage 2 Diesel Boost Cooler. This water-methanol injection system is engineered to provide cleaner combustion and improved thermal management across the entire boost range of your Ford Powerstroke engine. By proportionally injecting a water-methanol mixture based on boost pressure, the system ensures accurate delivery for optimal cooling and increased power without leaving a signature on the vehicle's computer.

At the heart of the SNO-420 kit is the VC-50 progressive controller. Housed in a standard 52mm gauge pod, the VC-50 features a 7-color OLED screen (Blue, White, Red, Yellow, Orange, Purple, Green) that displays boost pressure, injection percentage, and secondary nozzle activation. This controller manages two water-methanol nozzles with adjustable start and full points to match your engine's specific airflow requirements. The kit also includes a large 7-gallon reservoir, making it an ideal solution for daily drivers and light towing applications.

• Manufacturer Part Number: SNO-420
• Reduces EGTs by 100-300°F and increases horsepower by 65+ HP
• VC-50 Progressive Controller (52mm gauge) with 7-color OLED display
• Integrated boost gauge functionality with 2 fault codes for clogged or broken lines
• New Prime feature ensures fluid is in the lines at the push of a button
• Includes 7-gallon tank for extended range
• Cleans combustion chambers of carbon buildup and reduces emissions/regeneration cycles
• Made in the USA

Restore the integrity and pressure-holding capability of your water-methanol injection system with the Snow Performance Upper Housing Assembly. Specifically engineered for the 40900 series pump when configured for braided line plumbing, this replacement housing allows you to service a worn or leaking pump head without replacing the entire unit.

This assembly provides a direct fit to the factory pump motor, ensuring consistent fluid delivery and reliable bypass operation under load. Whether you are dealing with high-mileage wear or a damaged port, this genuine Snow Performance component ensures your injection system maintains the precise flow rates required for safe engine operation.

• Direct replacement for Snow Performance 40900 series pump upper housings
• Designed specifically for compatibility with braided stainless steel line setups
• Critical for maintaining consistent pressure and system seal
• Includes internal bypass and valving components
• Manufacturer Part Number: SNO-40900UHA-B