Fits 2002-2007 Subaru Impreza (including WRX, STI, RS, TS, 2.5i, and Outback Sport).

Worn or soft factory rubber bushings in the rear trailing arms often lead to excessive dynamic alignment changes, compromising handling precision and accelerating tire wear. The SuperPro SPF2810K Rear Trailing Arm Bushing Kit is engineered to stabilize suspension movement by replacing flexible OE components with high-grade polyurethane. This upgrade ensures your Subaru maintains its intended geometry under load, providing sharper steering response and a more planted feel during cornering.

• Precision-engineered polyurethane bushings for superior durability and reduced deflection
• Maintains consistent wheel alignment to optimize tire contact and longevity
• Direct replacement for original equipment bushings in the rear trailing arm location
• Designed to withstand high-stress performance driving and daily use
• Manufacturer Part Number: SPF2810K

Vehicle Fitment

Fits 1992-2005 Lexus GS300, GS400, IS300, SC300, and SC400.

The SuperPro SPF2785K Rear Trailing Arm Rearward Bushing Kit is engineered to restore suspension precision and eliminate the dynamic alignment shifts common with aged factory rubber components. Control arm bushings are critical for stabilizing arm movement; when OE rubber bushings soften or perish, they allow for excessive deflection that compromises handling and accelerates tire wear. This kit provides a high-durability upgrade that maintains correct geometry in all driving situations.

• Direct replacement for worn-out OE rearward trailing arm bushings
• Proprietary polyurethane material offers superior memory and durability compared to rubber
• Reduces dynamic changes in wheel alignment for more predictable handling
• Resistant to oils, fuels, and road grime for a longer service life
• Improves tire longevity by maintaining consistent contact patches
• Manufacturer Part Number: SPF2785K

Fits 1990-1997 Mazda Miata models equipped with manual steering.

Over time, factory rubber steering rack bushings perish, leading to vague steering response and unwanted rack movement. The SuperPro SPF2764K Front Steering Rack & Pinion Mount Bushing Kit replaces these worn components with high-performance polyurethane, restoring direct steering feel and maintaining proper rack alignment under load. Unlike rubber, these bushings will not soften or crack due to oil exposure or heat cycling.

Engineered and manufactured in Australia, these bushings are designed to withstand harsh conditions while providing a superior alternative to OE parts. This kit is specifically sized for the manual steering rack housing found in the NA-chassis Miata, providing a precise fit and increased service life for your steering system.

• Proprietary engineering-grade polyurethane formula
• Resistant to extreme temperatures, oils, and coolants
• Maintains steering geometry for improved handling and tire wear
• Includes SuperPro Lifetime Warranty
• Direct replacement for factory mounting bushings
• Manufacturer Part Number: SPF2764K

Vehicle Fitment

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, and STO) equipped with power steering.

Restore steering precision and eliminate rack movement with the SuperPro SPF2762K steering rack and pinion mount bushing kit. Designed to replace soft, degraded factory rubber, these polyurethane bushings provide a firm mounting interface that improves tactile feedback and ensures your steering rack remains centered during aggressive cornering. This upgrade is essential for correcting the vague steering feel and "dead spots" common in high-mileage NA chassis.

• Direct replacement for worn OE steering rack bushings
• Optimized for 1990-1997 Mazda Miata models with power steering racks
• Manufactured from SuperPro's proprietary engineering-grade polyurethane formula
• High resistance to engine oils, coolant, and extreme operating temperatures
• Improves steering geometry retention for better tire wear and predictable handling

• Manufacturer Part Number: SPF2762K
• Material: Proprietary Polyurethane
• Placement: Front Steering Rack & Pinion Mounts
• Warranty: Lifetime Warranty
• Country of Origin: Australia

Fits select 1969-2001 Alfa Romeo Spider, Jeep Cherokee and Grand Cherokee, Subaru DL, GL, RX, and XT, and Toyota Celica Supra.

The SuperPro SPF2755SK Front Shock Absorber Upper Bushing Kit is a precision-engineered upgrade designed to replace worn, soft factory rubber bushings. OE rubber bushings often degrade due to environmental exposure and mechanical stress, leading to vague steering response and compromised suspension geometry. SuperPro utilizes a proprietary, engineering-grade polyurethane formula that offers the durability of plastic with the resilience of rubber, ensuring the shock absorber remains properly indexed for consistent damping performance.

Designed and manufactured in Australia to withstand harsh off-road and high-performance conditions, these bushings are resistant to extreme temperatures, oils, and coolants. This kit provides a quieter, longer-lasting alternative to standard replacements, maintaining better alignment and increasing tire service life.

• Proprietary polyurethane material for enhanced durability and handling
• Resistant to oils, water, and extreme temperature fluctuations
• Maintains steering geometry and improves alignment retention
• Direct replacement for OE-style upper shock bushings
• Includes SuperPro Lifetime Warranty
• Manufacturer Part Number: SPF2755SK
• Designed and manufactured in Australia

Upgrade or replace worn factory rubber with the SuperPro SPF2722K Rear Shock Absorber Lower Mount Bushing Kit. This kit is designed to stabilize the lower shock mounting point, ensuring consistent suspension geometry and improved handling by reducing unwanted deflection. Unlike standard rubber mounts, SuperPro’s proprietary engineering-grade polyurethane is resistant to extreme temperatures, road grime, oils, and coolants, preventing the degradation and compression set that lead to alignment issues and premature tire wear.

Engineered and manufactured in Australia with over 40 years of suspension expertise, these bushings provide a precise fit that is quieter and longer-lasting than traditional aftermarket alternatives. The SPF2722K kit is an essential solution for maintaining vehicle stability and increasing the service life of your rear suspension components.

• Manufacturer Part Number: SPF2722K
• Material: Proprietary engineering-grade polyurethane formula
• Fitment: Replaces or upgrades factory rear shock absorber lower mount bushings
• Resistance: Unaffected by oils, grease, water, or extreme temperatures
• Durability: Designed for high performance and increased service life
• Warranty: Manufacturer Lifetime Warranty

Fits select 2002-2007 Subaru Impreza models, including WRX, STI, RS, TS, and Outback Sport. This kit is designed to address the excessive movement and deflection common in factory rear cross member bushings.

Vehicle manufacturers typically use soft, heavily-voided rubber bushings to isolate the passenger cabin from road noise. However, as these bushings age or face increased power loads, they allow significant movement in the subframe mounting points. This deflection impacts traction, degrades handling precision, and often leads to wheel hop during hard acceleration or gear changes. The SuperPro SPF2701K kit stabilizes the cross member using high-grade synthetic elastomer, delivering sharper handling and better power delivery without compromising OEM-level isolation.

• Replaces or augments factory bushings to reduce subframe deflection
• Minimizes wheel hop and improves traction under load
• Synthetic elastomer material resists oil, chemicals, and weathering better than rubber
• Maintains chassis geometry for more predictable handling
• Direct fitment for factory mounting locations
• Manufacturer Part Number: SPF2701K

Fits 2001-2005 Lexus IS300 Base and Sportcross models.

The SuperPro SPF2699K Steering Rack Mount Bushing Set is a direct replacement for the fast-wearing, soft factory rubber bushings. Over time, original equipment bushings degrade, leading to excessive steering rack movement and deflection. This slop results in steering wander and a lack of precision, often requiring constant small steering corrections to maintain a straight line on the road.

By upgrading to SuperPro’s engineered bushings, you anchor the steering rack firmly to the chassis. This significantly reduces movement under load, providing more consistent steering geometry and a more communicative feel through the steering wheel. It is an essential performance repair for drivers seeking to restore or improve steering response and predictable handling.

• Reduces steering rack deflection and slop over factory parts
• Improves steering precision and tactile feedback
• Eliminates on-road wandering caused by worn OE bushings
• Engineered for a precise fit in factory mounting points
• Manufacturer Part Number: SPF2699K

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring).

Control arm bushings serve as the critical pivot points between your vehicle's core suspension components. Over time, original rubber bushings degrade, allowing excessive deflection that results in sloppy steering response, irregular tire wear, and compromised handling. The SuperPro SPF2678K kit replaces these worn components with high-performance polyurethane, restoring chassis precision and maintaining proper suspension geometry under load.

Engineered and manufactured in Australia, these bushings are designed to withstand extreme temperatures and exposure to oils, water, and coolant. Unlike many performance bushings that introduce excessive noise, vibration, and harshness (NVH), SuperPro’s proprietary material formula is tuned to deliver sharper road manners while retaining OEM-like cabin isolation. This kit is essential for RX-7 owners looking to sharpen suspension feedback, especially on vehicles equipped with grippier tire compounds or upgraded braking systems.

• Proprietary engineering-grade polyurethane formula for maximum durability
• Resistant to oils, chemicals, and extreme environmental conditions
• Maintains consistent alignment settings by reducing bushing deflection
• Direct replacement for factory rear upper inner control arm bushings
• Manufacturer Part Number: SPF2678K
• Lifetime Warranty

Fits 1993-1995 Mazda RX-7 Base, R1, R2, and Touring models.

Control arm bushings are the vital pivot points between your vehicle's core suspension components. The SuperPro SPF2676K kit is engineered to replace worn or soft factory rubber bushings that cause significant deflection, leading to sluggish steering response, a disconnected driving feel, and accelerated tire wear. By upgrading to SuperPro's proprietary polyurethane material, you restore the precise alignment and road manners your FD RX-7 was designed to deliver.

Drawing on decades of development in harsh environments, SuperPro bushings focus on durability without compromising passenger comfort. These designs maintain OEM-level isolation of noise, vibration, and harshness (NVH) while providing the structural integrity needed for high-performance driving. This kit includes the outer bushings specifically for the lower rear toe control arms.

• Replaces OE outer bushings on the lower rear toe control arm
• Proprietary polyurethane material for superior durability and performance
• Reduces suspension deflection to maintain consistent alignment and improve handling
• Engineered to maintain factory NVH (Noise, Vibration, Harshness) levels
• Manufacturer Part Number: SPF2676K

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring models).

The SuperPro SPF2674K Rear Differential-to-Crossmember Bushing Kit is a precision-engineered solution for eliminating excessive drivetrain movement. Factory rubber bushings often soften and perish over time, leading to poor alignment stability and vague handling. This kit replaces those worn components with SuperPro's proprietary engineering-grade polyurethane formula, which provides a more stable mounting point for the rear differential without the harshness associated with solid mounts.

These bushings are specifically designed to withstand the harsh environment of the FD chassis, remaining unaffected by extreme temperatures, engine oils, or coolant. This ensures the steering and suspension geometry is maintained through a wide range of driving conditions.

• Direct replacement for factory differential-to-crossmember bushings
• Manufactured from proprietary engineering-grade polyurethane
• Superior resistance to oils, chemicals, and weathering
• Maintains consistent alignment and drivetrain positioning
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF2674K
• Includes SuperPro Limited Lifetime Warranty

Fits select 2005-2007 Subaru Impreza and Saab 9-2X models.

The SuperPro steering rack mount bushing kit (SPF2648K) is a precision-engineered upgrade designed to eliminate the steering slop and vagueness common in older vehicles. Factory rubber bushings are prone to softening and degradation, leading to excessive rack movement and deflection. By replacing these compliant components with SuperPro polyurethane, you securely anchor the steering rack to the subframe, resulting in a significantly more consistent and predictable steering feel.

• Eliminates steering rack deflection for improved accuracy and feedback
• Reduces vehicle wandering and the need for constant small steering corrections
• Direct replacement for worn or soft factory rubber bushings
• Maintains consistent alignment geometry under load
• Engineered for durability without the excessive NVH of solid mounts
• Manufacturer Part Number: SPF2648K

Whether you are restoring a daily driver or prepping a track car, this kit provides a tangible improvement in handling by ensuring the steering rack remains stationary during high-load cornering and braking.

Fits 2002-2006 Mini Cooper Base and S models.

The SuperPro SPF2639K front engine mount bushing is engineered to reduce excessive engine movement without compromising ride quality. By utilizing proprietary SuperPro Hybrid material, this kit bridges the gap between soft factory rubber and harsh solid mounts, providing a significant upgrade in durability and drivetrain stability. This control over engine pitch results in more direct power delivery and crisper gear changes, making it an essential upgrade for both daily-driven and high-performance Mini Cooper applications.

• Replaces worn OE bushings to restore and improve engine stability
• Proprietary SuperPro Hybrid material offers superior longevity over rubber
• Controls engine movement while maintaining factory NVH (Noise, Vibration, and Harshness) levels
• Direct fit for factory mounting points
• Manufacturer Part Number: SPF2639K
• Backed by SuperPro's Lifetime Warranty

This kit is designed for enthusiasts who require a reliable solution for engine mount failure while seeking improved throttle response and chassis feel.

Fits select 1989-1998 Nissan 200SX, 240SX, 300ZX, and Infiniti Q45.

The factory differential mount bushings are a known weak point in Nissan and Infiniti rear subframes. Over time, the original rubber degrades, leading to excessive differential movement and inefficient power delivery. The SuperPro SPF2637K Differential Mount Bushing Kit is engineered as a high-performance replacement that offers a significantly longer service life than OEM components.

Constructed from SuperPro's proprietary polyurethane, these bushings provide the necessary rigidity to secure the differential to the subframe while maintaining excellent NVH (noise, vibration, and harshness) characteristics for zero increased cabin noise. This kit is designed for a precise fit and straightforward installation, restoring drivetrain alignment and responsiveness.

• Manufacturer Part Number: SPF2637K
• Replaces low-service-life OEM differential mount bushings
• High-durability polyurethane construction for extended longevity
• Engineered to maintain factory-level cabin comfort and quiet operation
• Precision-fit for rear differential-to-subframe mounting points

Fits 2005-2011 Lotus Elise (Base, R, SC) and 2006-2011 Lotus Exige (Base, S, S 240).

SuperPro polyurethane bushings replace the factory rubber components to provide a more stable and predictable pivot point for your Lotus's rear suspension. These bushings are engineered to minimize deflection and unwanted movement during high-performance driving, ensuring consistent wheel alignment and sharper handling without the excessive noise or harshness typically associated with race-only bushings.

Constructed from a proprietary engineering-grade polyurethane formula, these bushings are designed to withstand Australian terrain and extreme conditions. They are highly resistant to oil, water, coolant, and temperature fluctuations, preventing the degradation commonly seen in OE rubber components. This kit is an essential upgrade for owners using stickier tire compounds or larger wheel packages that increase loads on the factory suspension links.

• Manufacturer Part Number: SPF2604K
• Material: Proprietary engineering-grade polyurethane
• Location: Rear Lower Control Arm
• Resistant to oils, coolants, and extreme temperatures
• Designed, engineered, and manufactured in Australia
• Includes a Lifetime Warranty

Fits 2005-2011 Lotus Elise and Exige models. This SuperPro polyurethane bushing kit is engineered to replace soft or worn factory rubber components, eliminating excessive deflection to maintain precise suspension geometry and steering response.

Designed for dual-position versatility, the SPF2603K kit fits both the Front Lower Control Arm Inner and the Rear Upper Control Arm Inner positions. Upgrading to SuperPro's proprietary polyurethane formula helps prevent irregular tire wear and restores a connected road feel while maintaining OEM-level noise and vibration isolation. Note: One kit services two locations; two kits are required if you wish to upgrade both the front and rear control arm positions.

• Manufacturer Part Number: SPF2603K
• Positions: Front Lower Inner or Rear Upper Inner
• Material: Proprietary engineering-grade polyurethane
• Resilience: Unaffected by extreme temperatures, oils, water, or coolant
• Origin: Designed, engineered, and manufactured in Australia
• Warranty: Lifetime Manufacturer Warranty

Fits 2005-2011 Lotus Elise and Exige models.

SuperPro SPF2602K front upper control arm bushings provide a critical upgrade for the Lotus suspension system. While factory rubber bushings are prone to deflection and degradation, these polyurethane replacements maintain precise suspension geometry under load. By minimizing unwanted movement, this kit eliminates vague steering response and protects against irregular tire wear, particularly in vehicles equipped with high-grip tires or upgraded braking systems.

Engineered and manufactured in Australia, SuperPro's proprietary polyurethane formula is designed to withstand extreme temperatures, oils, and road contaminants while retaining OEM-level NVH (Noise, Vibration, and Harshness) isolation. This ensures your vehicle remains comfortable for daily driving while delivering track-ready performance and durability.

• Replaces worn OE bushings to restore steering precision and handling
• Manufactured from proprietary engineering-grade polyurethane
• Resistant to extreme temperatures, oils, water, and coolant
• Designed for long-term durability in harsh environments
• Includes a lifetime manufacturer warranty
• Manufacturer Part Number: SPF2602K

Fits select 1994-1998 Nissan 200SX and 240SX models.

The SuperPro SPF2582K Rear Control Arm Bushing Kit is engineered to replace worn factory bushings that frequently suffer from a low service life. By upgrading to SuperPro’s proprietary polyurethane material, you eliminate excessive play in the rear suspension while maintaining a comfortable ride. Unlike standard performance bushings that can increase NVH, this kit is specifically designed to deliver zero cabin noise while providing significantly better durability than the original equipment.

This kit is a direct-fit solution that restores suspension geometry and improves chassis response. It is an ideal choice for enthusiasts looking to refresh their rear control arms with a part that is both easy to install and built to withstand the rigors of daily driving or performance use.

• Manufacturer Part Number: SPF2582K
• High-grade polyurethane construction for extended service life
• Engineered for zero cabin noise and vibration transfer
• Direct replacement for OEM rear control arm bushings
• Improves suspension stability and handling precision

Fits select 1998-2016 Audi and Volkswagen models including A3, TT, Beetle, Golf, GTI, and Jetta (1.8T / 2.0T). Refer to the fitment table for specific submodel compatibility.

The SuperPro SPF2576K Rear Lower Engine Pendulum Mount Center Pivot Bushing Set is a high-performance upgrade designed to replace the compliant, wear-prone factory rubber bushings in the "dogbone" mount. By utilizing SuperPro's proprietary engineering-grade polyurethane, this set minimizes excessive engine and transmission movement without the harshness often associated with standard polyurethane bushings.

This center pivot bushing set is essential for maintaining proper drivetrain alignment, reducing wheel hop under hard acceleration, and providing a more direct feel during gear changes. It is resistant to extreme temperatures, oils, and coolants, ensuring a significantly longer service life than OEM components.

• Enhanced Performance: Reduces engine rock for improved power delivery and crisper shifting.
• Proprietary Polyurethane: Engineering-grade formula developed and tested in Australia for durability and quiet operation.
• Precision Engineering: Designed to maintain steering geometry and increase safety through better alignment retention.
• Direct Replacement: Replaces the center pivot bushings in the factory rear lower engine pendulum mount.
• Manufacturer Part Number: SPF2576K
• Warranty: Covered by a Lifetime Warranty.

Fits select 1992-2000 Lexus GS300, SC300, SC400, and Toyota Supra (Base & Twin Turbo).

The SuperPro SPF2553K Rear Forward Subframe Insert Bushing kit is a precision-engineered solution for reducing rear-end instability and drivetrain slop. These inserts are designed to fill the voids in the factory rubber subframe bushings, significantly limiting unwanted subframe movement during high-torque acceleration and hard cornering. This stabilization maintains more consistent suspension geometry and improves power delivery without the excessive NVH (Noise, Vibration, and Harshness) typically associated with solid bushings.

Manufactured in Australia from SuperPro's proprietary engineering-grade polyurethane, these bushings are unaffected by extreme temperatures, oils, or road chemicals. This ensures a significantly longer service life compared to standard rubber components and maintains alignment accuracy over time.

• Reduces rear subframe movement to enhance handling and alignment stability
• Direct-fit inserts bridge the voids in OE rubber bushings
• Proprietary polyurethane formula resistant to oils, coolant, and environmental debris
• Engineered for high-performance street and track applications
• Designed and manufactured in Australia
• Includes lifetime manufacturer warranty
• Manufacturer Part Number: SPF2553K

Fits 2002-2006 Mini Cooper Base and S models.

The SuperPro SPF2552K Front Control Arm Bushing Kit is a high-performance suspension upgrade designed to replace compliant or deteriorated factory rubber bushings. Utilizing a proprietary engineering-grade polyurethane formula, these bushings provide a superior alternative to standard components by improving steering precision, maintaining consistent wheel alignment, and offering a significantly longer service life.

Engineered and manufactured in Australia, SuperPro bushings are specifically formulated to remain unaffected by extreme temperatures, road grime, engine oils, water, or coolant. This kit ensures your vehicle maintains its handling characteristics under demanding conditions without the noise or harshness often associated with inferior aftermarket materials.

• Proprietary polyurethane formula for enhanced durability and quiet operation
• Maintains better alignment and improves steering response
• Resistant to oils, coolant, and environmental contaminants
• Designed and manufactured in Australia with over 40 years of engineering experience
• Includes manufacturer's Lifetime Warranty
• Manufacturer Part Number: SPF2552K

Fits 2003-2006 Mitsubishi Lancer Evolution (including MR, RS, SE) and Outlander (LS, XLS, Limited, SE).

The SuperPro SPF2544K Rear Upper Rearward Differential Mounting Bracket Bushing Set is engineered to replace the soft, failure-prone factory rubber bushings located in the rearward diff-supporting crossmember. Over time, original equipment units soften and tear, allowing the rear differential to shift under load. This movement translates to vague throttle response, drivetrain clunks, and increased vibration during rapid transitions on and off the gas.

SuperPro utilizes advanced materials to provide more precise differential location without compromising cabin comfort. These bushings are designed to maintain OEM-like noise, vibration, and harshness (NVH) levels while offering a significantly longer service life than natural rubber. By stabilizing the differential, you regain crisp responsiveness and eliminate secondary drivetrain movements.

• Direct replacement for worn OE rearward differential mount bushings
• Improves drivetrain rigidity and throttle response
• Maintains factory levels of NVH isolation for daily drivability
• High-performance material resists softening and degradation
• Manufacturer Part Number: SPF2544K

Fits 2003-2006 Mitsubishi Lancer Evolution (including MR, RS, and SE models) equipped with Active Yaw Control (AYC).

The SuperPro SPF2543K Rear Differential Pinion Mount Bushing Set replaces the factory forward differential mount bushings, also known as the pinion mount bushings. The original equipment (OE) rubber units are prone to breaking down and softening over time, especially when subjected to high-performance driving. Worn bushings allow for excessive rear differential movement under load, which manifests as sluggish throttle response, unwanted drivetrain vibration, and secondary movements when getting on or off the gas.

SuperPro engineered these bushings to restore drivetrain precision without compromising cabin comfort. This kit maintains OEM levels of noise, vibration, and harshness (NVH) isolation while ensuring the differential is accurately located under a wide range of conditions. Unlike natural rubber, SuperPro’s proprietary materials are designed to maintain peak performance and geometry throughout their service life.

• Direct replacement for factory pinion mount bushings (forward differential mounts)
• High-durability material resists degradation better than OE rubber
• Maintains factory NVH levels for daily-driven comfort
• Includes all necessary components for the pinion mount position
• Specifically for AYC-equipped models (Use SPF1975K for non-AYC models)
• Manufacturer Part Number: SPF2543K

Fits select 1992-2000 Lexus GS300, SC300, SC400, and Toyota Supra (Base and Twin Turbo).

SuperPro rear subframe insert bushings are an effective solution for reducing unwanted subframe movement without the harshness of a full solid bushing conversion. These inserts fill the voids in the factory rubber bushings, significantly reducing deflection during hard acceleration and cornering. This stabilizes the rear suspension geometry, resulting in more predictable handling and improved power delivery to the ground.

Manufactured in Australia from SuperPro's proprietary engineering-grade polyurethane, these bushings are designed to withstand extreme temperatures and exposure to oils, water, and coolant. Unlike rubber, which degrades and softens over time, this formula maintains its physical properties for the life of the vehicle.

• Proprietary polyurethane formula for superior durability and quiet operation
• Reduces rear subframe deflection and improves steering response
• Resistant to oils, solvents, and extreme environmental conditions
• Direct-fit design for rearward subframe positions
• Engineered and manufactured in Australia
• Manufacturer Part Number: SPF2520K
• Lifetime Warranty

Fits 2004-2006 Pontiac GTO.

The SuperPro SPF2498K Replacement Upper Spring Pad is a high-performance suspension upgrade designed to replace the soft factory rubber isolators. Engineered and manufactured in Australia, these pads are molded from SuperPro’s proprietary engineering-grade polyurethane. Unlike standard rubber that compresses and degrades over time, this polyurethane formula maintains its structural integrity under extreme loads and temperatures, ensuring your springs remain properly seated.

This component provides a durable, quiet solution that is unaffected by exposure to oils, water, or coolant. By maintaining consistent spring positioning, the SPF2498K helps preserve steering geometry and improves handling response. It is a direct-fit replacement for the OE component, offering increased service life and reliability for the GTO chassis.

• Replaces worn OE upper spring pads
• Molded from proprietary engineering-grade polyurethane
• High resistance to oils, coolant, and environmental contaminants
• Maintains consistent spring seat alignment and geometry
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF2498K
• Lifetime Warranty

Fits 1990-1996 Nissan 300ZX (Base, 2+2, and Turbo models).

Restore steering precision and eliminate play with the SuperPro Steering Rack Mount Bushing Kit. As factory rubber bushings age, they soften and degrade from exposure to engine heat, oil, and road contaminants, leading to a vague steering feel and inconsistent alignment. This kit replaces those worn components with SuperPro's proprietary engineering-grade polyurethane to provide a more direct connection between the steering rack and the chassis.

Designed and manufactured in Australia, these bushings are engineered to maintain correct steering geometry even under high-load driving conditions. Unlike standard rubber, this polyurethane formula is unaffected by extreme temperatures, oils, or coolants, ensuring a significantly longer service life and more consistent performance.

• Replaces soft or degraded OE steering rack mount bushings
• Proprietary engineering-grade polyurethane formula for durability and feedback
• Resistant to oils, water, coolant, and extreme temperature fluctuations
• Improves steering response and maintains alignment accuracy
• Includes all necessary bushings for a complete steering rack mounting refresh
• Manufacturer Part Number: SPF2492K
• Backed by SuperPro's Lifetime Warranty

The SuperPro SPF2476K Transmission Crossmember Mounting Kit provides a durable, high-performance alternative to standard rubber bushings. Engineered to stabilize the transmission crossmember, this kit utilizes SuperPro's proprietary polyurethane formula to maintain precise drivetrain geometry and improve overall handling without the premature failure common with factory rubber components.

These bushings are specifically formulated to remain unaffected by exposure to oils, fuel, coolant, and extreme operating temperatures, ensuring long-term reliability in harsh undercar environments. Designed and manufactured in Australia with over 40 years of engineering expertise, this kit is an essential upgrade for maintaining vehicle alignment and extending service life.

• Replaces soft or worn factory transmission crossmember bushings
• Manufactured from proprietary engineering-grade polyurethane
• Resistant to oils, chemicals, and extreme temperature fluctuations
• Designed for improved drivetrain alignment and service life
• Manufacturer Part Number: SPF2476K
• Includes manufacturer's Lifetime Warranty

Fits 1998-2002 Lexus LX470 and Toyota Land Cruiser Base models.

The SuperPro steering rack and pinion mount bushing kit (SPF2470K) is a direct-replacement upgrade for the soft, fast-wearing factory rubber bushings. Over time, original equipment bushings degrade due to oil exposure and high mileage, leading to excessive rack movement, steering slop, and vehicle wandering. This kit uses SuperPro’s specialized synthetic elastomer to properly anchor the steering rack, ensuring more consistent alignment and precise steering feedback.

• Reduces steering rack movement and deflection for better control
• Minimizes the need for constant corrections to maintain course
• Replaces compliant OE rubber with high-durability bushings
• Resistant to oils and environmental contaminants
• Engineered for improved steering feel without excessive vibration
• Manufacturer Part Number: SPF2470K

Fits select 1998-2024 Lexus GX460, GX470, LX470 and Toyota 4Runner, FJ Cruiser, and Land Cruiser.

SuperPro SPF2461K Trailing Arm bushings are designed to stabilize rear axle movement and ensure suspension geometry remains consistent under load. Original equipment rubber bushings are prone to excessive deflection and fatigue, leading to dynamic changes in wheel alignment that compromise handling precision and accelerate tire wear. This polyurethane upgrade provides a more resilient pivot point, restoring chassis communication and maintaining alignment settings during articulation.

• Replaces worn or soft factory rubber bushings to eliminate geometry drift
• High-grade polyurethane construction for superior durability and oil resistance
• Improves rear-end stability and predictable handling characteristics
• Direct fit for the rear lower trailing arm location
• Manufacturer Part Number: SPF2461K

Note: Each SPF2461K kit includes two (2) bushing assemblies. To replace both the forward and rearward bushings in both lower trailing arms, two (2) kits are required per vehicle.

Fits select 2002-2007 Subaru Impreza and Saab 9-2X models.

The factory differential mount bushing is frequently identified as a weak point in the drivetrain, often suffering from a low service life that leads to excessive movement. The SuperPro Differential Support Bracket (SPF2433K) provides a direct-fit solution designed for maximum durability. This bracket is engineered for enthusiasts who need a long-lasting component that is easy to install while ensuring zero cabin noise (NVH) is added to the vehicle.

• Direct replacement for worn or soft factory differential mount bushings
• High-strength construction for an extended service life
• Engineered for easy installation in the home garage or shop
• Maintains factory refinement with zero added cabin noise or vibration
• Manufacturer Part Number: SPF2433K