Fits select 1989-1998 Nissan 200SX, 240SX, 300ZX, and Infiniti Q45.

SuperPro polyurethane bushings stabilize control arm movement to maintain precise suspension geometry under load. Original equipment rubber bushings frequently soften or fail, resulting in dynamic alignment shifts that cause unpredictable handling and accelerated tire wear. These SPF1638K bushings serve as a superior repair or performance upgrade, offering a more durable solution that preserves alignment settings without sacrificing ride quality.

• Proprietary engineering-grade polyurethane formula for high durability and quiet operation
• Resistant to extreme temperatures, oils, water, and engine coolant
• Eliminates excessive suspension deflection for consistent handling performance
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF1638K
• Lifetime Warranty

Fits select 2004-2017 Chevrolet Caprice, SS and Pontiac G8, GTO.

The SuperPro SPF1590BK Front Poly Upper Strut Mount Kit is a high-performance replacement for soft or worn-out factory rubber mounts. Utilizing a proprietary engineering-grade polyurethane formula, these mounts are designed to maintain precise steering geometry and improve handling without the premature failure often associated with OE components. This kit is specifically formulated to remain quiet while resisting degradation from road grime, oils, coolants, and extreme operating temperatures.

• Proprietary polyurethane formula for durability and quiet operation
• Maintains alignment and steering geometry under heavy loads
• Resistant to extreme temperatures, oils, water, and coolants
• Direct replacement for OE upper strut mount bushings
• Lifetime Warranty
• Engineered and manufactured in Australia
• Manufacturer Part Number: SPF1590BK

Fits select 1988-1995 Honda Accord, Civic, CRX, and Prelude models.

Sway bar link bushings are often the most overlooked components in a suspension system, yet they are subjected to constant articulation and heavy load changes every time you drive. Over time, original rubber bushings degrade and soften, leading to increased body roll, sluggish steering response, and unwanted suspension noise. The SuperPro SPF1531K Rear Sway Bar End Link Bushing Kit replaces these worn components with high-performance polyurethane to restore handling precision and link effectiveness.

Engineered from SuperPro's proprietary polyurethane compounds, these bushings provide a lifetime of maintenance-free operation. Unlike standard rubber, these bushings do not break down when exposed to oil, road salt, or extreme weather. This ensures your sway bar maintains maximum leverage and stability for the life of the vehicle without the need for periodic lubrication.

• Manufacturer Part Number: SPF1531K
• Material: Proprietary SuperPro Polyurethane
• Position: Rear Sway Bar End Link
• Performance: Improves steering response and reduces body roll
• Durability: Maintenance-free design with lifetime performance
• Fitment: Direct replacement for OE-style end link bushings

Fits select 1990-2008 Subaru Legacy, Impreza, and Forester models, as well as 2005-2006 Saab 9-2X.

The SuperPro SPF1491K Rear Trailing Arm Lower Forward Bushing Kit is designed to replace soft or worn factory rubber bushings that act as critical pivot points for your vehicle's rear suspension. Defective or aged bushings allow for excessive trailing arm deflection, leading to vague steering response, unsettled handling, and accelerated tire wear. This kit restores chassis stability, ensuring your suspension geometry remains consistent under load.

Forged from nearly 50 years of development in Australia's harshest environments, SuperPro polyurethane provides superior durability without sacrificing ride quality. These bushings are engineered to deliver precise handling and improved road manners while maintaining OEM-level noise, vibration, and harshness (NVH) isolation for daily driving comfort.

• Replaces compliant factory trailing arm lower forward bushings
• High-grade polyurethane construction for long-term durability
• Maintains factory-level cabin isolation and passenger comfort
• Reduces deflection to improve tire contact and handling response
• Ideal for vehicles with upgraded wheels, tires, or braking systems
• Manufacturer Part Number: SPF1491K

Fits select 1989-1998 Nissan 240SX and 300ZX models.

Replace worn or soft factory rubber bushings with the SuperPro Front Sway Bar Mount To Chassis Bushing Kit to restore and enhance your vehicle's handling. These bushings are engineered using SuperPro's proprietary polyurethane formula, providing a superior alternative to rubber that remains unaffected by extreme temperatures, engine oils, or coolant. By maintaining more consistent steering geometry and reducing unwanted movement, this kit improves tire wear and alignment stability for both daily driving and performance use.

• Proprietary engineering-grade polyurethane for durability and quiet operation
• Resistant to oils, water, and harsh environmental conditions
• Improves steering response and handling precision
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF1485-25K
• Backed by SuperPro's Lifetime Warranty

Fits select 1989-1998 Nissan 240SX and 1990-1996 Nissan 300ZX models.

Sway bar mount bushings are critical components that serve as the foundation for your vehicle's anti-roll system. Factory rubber bushings are prone to excessive deflection and deterioration over time. When these bushings soften or fail, they allow the sway bar to move in unwanted directions, significantly reducing its effectiveness and causing a vague feeling in the rear suspension during cornering.

Upgrading to the SuperPro SPF1485-21K bushing kit restores lost sway bar performance by providing a more stable mounting point. Engineered to replace worn original equipment (OE) bushings, these high-performance replacements ensure the sway bar begins working immediately as the chassis rolls, resulting in sharper handling and more predictable vehicle dynamics.

• Eliminates unwanted sway bar movement for improved roll control
• Direct replacement for factory chassis mount bushings
• Restores handling precision and steering response
• High-durability material engineered for long-lasting performance
• Manufacturer Part Number: SPF1485-21K

Fits 1992-2000 Lexus SC300 and SC400, and 1993-1998 Toyota Supra (Base and Twin Turbo).

The SuperPro SPF1474K front upper inner control arm bushing set is engineered to replace soft, worn factory rubber units that compromise handling and tire life. By stabilizing the movement of the control arms, these bushings ensure consistent suspension geometry and precise wheel alignment under all driving conditions. Unlike traditional rubber, these polyurethane bushings maintain their shape without becoming noisy or harsh.

• Proprietary engineering-grade polyurethane formula for superior longevity and performance
• Resistant to extreme temperatures, oils, water, and engine coolant
• Maintains critical alignment geometry for improved handling and reduced tire wear
• Direct replacement for OE bushings in factory control arms
• Designed, engineered, and manufactured in Australia
• Lifetime Warranty
• Manufacturer Part Number: SPF1474K

Fits select 1990-2008 Saab 9-2X and Subaru Forester, Impreza, and Legacy models.

Control arm bushings serve as the critical pivot points and links between your vehicle's core suspension components. Over time, original equipment (OE) rubber bushings degrade, leading to significant deflection and unwanted movement. This results in slower steering response, a disconnected driving feel, and irregular tire wear. The SuperPro SPF1463K kit replaces these worn components with high-performance polyurethane, restoring chassis geometry and improving road manners.

Developed and tested in Australia’s demanding environments, SuperPro bushings are engineered to deliver superior durability without sacrificing cabin comfort. This kit is designed to maintain OEM levels of noise, vibration, and harshness (NVH) isolation while providing the stability required for upgraded wheel and tire packages or heavy-duty use. Whether for a daily commute or spirited driving, these bushings ensure consistent alignment and predictable handling.

• Manufacturer Part Number: SPF1463K
• Material: High-grade proprietary polyurethane
• Direct replacement for rear lateral arm and outer bushings
• Reduces suspension deflection and improves tire longevity
• Maintains factory levels of cabin isolation and comfort
• Engineered for durability in harsh driving conditions

Fits 1982-1986 Toyota Celica Supra.

Replace aging, soft factory rubber with the SuperPro SPF1447K Rear Subframe Forward Mount Bushing Set to restore chassis rigidity and predictable handling. These bushings are engineered to stabilize the rear subframe, preventing the excessive movement and alignment shifts that occur during hard cornering or acceleration. Made from a proprietary engineering-grade polyurethane, they offer a superior service life compared to standard rubber replacements without the harshness often associated with inferior aftermarket materials.

• Proprietary SuperPro polyurethane formula for durability and vibration dampening
• Resistant to oils, coolants, and extreme environmental temperatures
• Designed to maintain precise steering geometry and improve tire wear
• Direct fitment to factory subframe mounting points
• Manufacturer Part Number: SPF1447K
• Includes a lifetime warranty
• Engineered and manufactured in Australia

Fits select 1992-1997 Lexus SC300, SC400, and Toyota Supra.

The SuperPro Front Lower Inner Rearward Control Arm Bushing Kit (SPF1404K) is engineered to replace soft, worn factory rubber bushings that cause steering deflection, sloppy handling, and irregular tire wear. By maintaining precise suspension geometry under load, these polyurethane bushings deliver sharper steering response and improved road manners. This kit is specifically for the rearward pivot position on the front lower control arms.

Technical Note: MKIV Supra models used two different front lower control arm designs. While this kit typically suits vehicles produced through June 1996, these arms are often interchanged. We recommend measuring your current bushings to confirm compatibility for your specific chassis.

• Proprietary engineering-grade polyurethane formula
• Resistant to extreme temperatures, oils, water, and engine coolant
• Maintains OEM-level noise, vibration, and harshness (NVH) isolation
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF1404K
• Lifetime Warranty

Fits 1992-1997 Lexus SC300 and SC400 Base, and 1993-1998 Toyota Supra Base and Twin Turbo.

Restore steering precision and eliminate suspension deflection with the SuperPro SPF1403K front lower inner forward control arm bushing kit. As factory rubber bushings age, they soften and tear, leading to a vague steering feel, irregular tire wear, and diminished braking stability. SuperPro’s proprietary engineering-grade polyurethane formula provides a superior alternative to OEM rubber, offering increased durability and sharper handling without sacrificing cabin comfort or introducing excessive NVH (Noise, Vibration, and Harshness).

Important Fitment Note: For MKIV Supra models, this kit is typically compatible with vehicles produced through June 1996. However, because these control arms are often interchanged between models and years, we recommend measuring your existing components to confirm compatibility before ordering.

• MPN: SPF1403K
• Position: Front Lower Inner Forward
• Material: Proprietary engineering-grade polyurethane
• Resilience: Resistant to oils, water, coolant, and extreme temperatures
• Manufacturing: Designed, engineered, and manufactured in Australia
• Warranty: Manufacturer Lifetime Warranty

Fits select 1975-1993 Volvo 240, 242, 244, 245, 262, 264, and 265.

Restore steering precision and chassis stability to your classic Volvo with the SuperPro SPF1312K Rear Trailing Arm-to-Axle Bushing Kit. Over time, original rubber bushings degrade and soften, leading to excessive movement in the rear suspension and dynamic changes in wheel alignment during cornering or braking. This kit is engineered to stabilize the trailing arms, ensuring consistent suspension geometry under load while improving overall handling and extending tire life.

Specifically designed for efficient installation, this kit utilizes a design that allows for the re-use of the factory OEM metal shell. This eliminates the need to remove the difficult-to-extract factory shells, providing a high-performance upgrade that mounts directly into the existing housing.

• Manufacturer Part Number: SPF1312K
• Component Type: Rear Trailing Arm-to-Axle Bushings
• Installation Detail: Designed to install into the original factory metal outer shells
• Performance: Maintains correct wheel alignment and reduces rear-end deflection
• Construction: Engineered for long-term durability and resistance to oils and road salt

Fits select 1991-2004 Dodge Stealth, Mitsubishi 3000GT, and Mitsubishi Diamante models. These precision-engineered bushings are designed to replace worn original equipment rubber units, restoring steering response and maintaining correct suspension geometry under load.

The SuperPro SPF1257-23K bushing set is manufactured from a proprietary engineering-grade polyurethane formula. Unlike standard rubber, this material is resistant to deterioration from engine oils, coolant, and road contaminants while remaining unaffected by extreme temperature fluctuations. These 23mm bore bushings provide a superior balance of durability and performance, reducing sway bar deflection without introducing excessive noise or vibration.

• Bore Diameter: 23mm
• Material: Proprietary SuperPro polyurethane for high-performance service life
• Design: Specific to front sway bar mounting points
• Durability: Resistant to oil, water, and chemical exposure
• Country of Origin: Designed and manufactured in Australia
• Includes: Pair of front sway bar mount bushings
• Manufacturer Part Number: SPF1257-23K
• Warranty: Lifetime manufacturer warranty

Fits select 1991-2002 Acura SLX, Dodge Stealth, Isuzu Trooper, and Mitsubishi 3000GT models. This SuperPro Front Sway Bar Mount Bushing Set replaces soft, worn original equipment rubber with a high-performance 22mm polyurethane solution. Designed to maintain steering geometry and enhance vehicle handling, these bushings provide a precise fit that eliminates the excessive play often found in aged suspension systems.

Constructed from SuperPro's proprietary engineering-grade polyurethane, this set is engineered to withstand harsh road conditions without degrading. Unlike standard rubber, this material is resistant to oils, coolants, and extreme temperature fluctuations, ensuring a long service life and consistent performance. This kit is a direct-fit upgrade for enthusiasts looking to improve alignment stability and tire wear.

• Manufacturer Part Number: SPF1257-22K
• Bore Size: 22mm
• Material: Proprietary polyurethane formula
• Installation: Mounts to factory front sway bar locations
• Origin: Designed, engineered, and manufactured in Australia
• Resistance: Impervious to extreme temperatures, water, and oils

Fits 1982-1986 Toyota Celica Supra models.

SuperPro rear IRS control arm bushings (SPF1213K) are engineered to replace soft or worn factory rubber components that allow for excessive movement and dynamic alignment changes. By stabilizing the control arms, these bushings ensure consistent suspension geometry is maintained under load, improving both steering precision and tire longevity. This kit is the ideal solution for both standard repairs and performance upgrades.

Manufactured in Australia from a proprietary engineering-grade polyurethane formula, these bushings are resilient against oils, coolants, and extreme temperatures. Unlike traditional rubber, they provide a more durable service life without the typical NVH (noise, vibration, harshness) issues associated with inferior materials.

• Proprietary engineering-grade polyurethane for superior durability
• Unaffected by extreme temperatures, oils, water, or coolant
• Maintains precise wheel alignment to enhance handling performance
• Direct replacement for OEM bushings to restore factory geometry
• Manufactured in Australia
• Lifetime Warranty
• Manufacturer Part Number: SPF1213K

Fits 1992-2000 Lexus SC300/SC400 and 1993-1998 Toyota Supra (Base and Twin Turbo).

Over time, factory rubber steering rack bushings degrade, leading to steering slop, excessive movement, and a "wandering" sensation on the road. The SuperPro steering rack mount bushing set (SPF1193-50K) replaces these soft OE components with high-performance polyurethane to anchor the rack properly to the subframe. This 50mm set significantly reduces deflection, ensuring more consistent steering geometry and more accurate feedback during cornering or high-speed driving.

• 50mm bore size for specific rack mounting requirements
• Replaces soft factory rubber to eliminate rack movement and slop
• Improves steering response, precision, and road feel
• Direct-fit replacement for the original mounting points
• Resistant to oils, road chemicals, and weathering for long-term durability
• Manufacturer Part Number: SPF1193-50K

Fits select 1992-2000 Lexus SC300, SC400 and 1993-1998 Toyota Supra (Base and Twin Turbo).

Replace compliant or deteriorated factory rubber with the SuperPro SPF1193-47K Front Steering Rack and Pinion Mount Bushing Set. Developed using a proprietary engineering-grade polyurethane formula, these 47mm bushings provide a rigid, precise mounting point for the steering rack. This upgrade significantly reduces steering play and helps maintain consistent alignment geometry under high cornering loads, resulting in sharper feedback and more predictable handling.

Unlike standard rubber components, SuperPro polyurethane is engineered to remain unaffected by extreme temperatures, road salts, engine oils, or coolants. This kit is designed as a direct replacement for the OE bushings, providing a superior service life and improved tire wear without the noise or vibration often associated with lower-quality poly bushings.

• Manufacturer Part Number: SPF1193-47K
• Position: Front Steering Rack and Pinion Mount
• Bore Diameter: 47mm
• Material: Proprietary engineering-grade polyurethane
• Improved steering response and driver feedback
• Corrects and maintains steering geometry
• Highly resistant to chemicals and environmental degradation
• Includes manufacturer's lifetime warranty

Fits 1983-1988 Toyota Tercel DLX, DX, EZ, SR5, and STD models.

Control arm bushings serve as the critical pivot points connecting your vehicle's core suspension components. Worn or perished factory rubber bushings allow for significant deflection, which leads to vague steering response, a sloppy driving feel, and accelerated tire wear. SuperPro polyurethane bushings are engineered to eliminate this unwanted movement, restoring alignment geometry and handling precision.

Developed and tested in Australia’s harshest environments, these bushings utilize a proprietary polyurethane compound that prioritizes durability without compromising ride quality. While many performance bushings increase cabin noise, SuperPro designs maintain OEM-level isolation from noise, vibration, and harshness (NVH), making them ideal for both daily commutes and spirited driving.

• Direct replacement for factory front control arm bushings
• High-grade polyurethane construction for superior service life over rubber
• Reduces suspension deflection for sharper, more predictable steering
• Maintains original equipment levels of comfort and NVH isolation
• Manufacturer Part Number: SPF1064K

Fits select 1968-1993 Mazda, Nissan, and Mitsubishi models including RX-2/RX-3/RX-4/RX-7, 280ZX, 510, 720, and Galant.

Restore steering precision and eliminate play in your vehicle's steering linkage with the SuperPro Front Idler Arm Bushing Kit. Over time, factory rubber bushings soften and degrade due to exposure to road contaminants and engine heat, leading to vague steering feel and inconsistent alignment. This kit replaces those worn OE components with high-performance polyurethane for a sharper, more responsive front end.

Engineered and manufactured in Australia, SuperPro bushings are made from a proprietary engineering-grade polyurethane formula. Unlike rubber, this material is unaffected by extreme temperatures, oils, water, or coolant. This ensures your steering geometry remains stable under load, providing better handling, improved tire wear, and increased service life for your steering components.

• Part Number: SPF1003K
• Material: Proprietary engineering-grade polyurethane
• Maintains steering geometry and alignment accuracy
• Resistant to oils, chemicals, and environmental degradation
• Direct replacement for factory idler arm bushings
• Includes SuperPro Lifetime Warranty
• Designed and manufactured in Australia

Fits 2004-2006 Pontiac GTO Base.

The SuperPro SPF0877K Camber and Toe Adjusting Bushing Set is a precision-engineered solution for addressing the alignment limitations of the factory rear suspension. Designed to replace soft, prone-to-failure rubber components, this set utilizes SuperPro's proprietary engineering-grade polyurethane to provide a stable, long-lasting platform for your vehicle's suspension geometry. This kit is essential for maintaining a proper tire contact patch on lowered vehicles or those used in high-performance driving environments.

By allowing for precise camber and toe adjustments, this bushing set corrects steering geometry to reduce uneven tire wear and improve overall handling predictability. Unlike standard rubber, this polyurethane formula is unaffected by extreme temperatures, oils, or coolants, ensuring consistent performance for the life of the vehicle.

• Manufacturer Part Number: SPF0877K
• Material: Proprietary engineering-grade polyurethane
• Adjustment Type: On-car adjustable for camber and toe
• Durability: Resistant to oils, water, and environmental contaminants
• Performance: Enhances steering response and maintains alignment settings
• Origin: Designed, engineered, and manufactured in Australia

Fits select 1983-2007 Geo, Lexus, and Toyota models including Avalon, Camry, Celica, Corolla, Highlander, Prizm, and Solara.

Rear trailing arm bushings serve as the vital pivot point and link between core suspension components. Over time, original equipment rubber bushings soften and perish, leading to significant deflection, slower steering response, and irregular tire wear. This SuperPro polyurethane bushing set is engineered to restore handling precision and eliminate the sloppy feel caused by worn suspension links, especially on vehicles with larger wheels or upgraded braking systems.

Utilizing proprietary material technology developed through decades of suspension expertise, these bushings offer superior durability compared to standard rubber without sacrificing ride quality. They are designed to maintain OEM levels of noise, vibration, and harshness (NVH) isolation while providing the stability required for consistent alignment geometry in all driving conditions.

• Manufacturer Part Number: SPF0823K
• Material: Proprietary SuperPro Polyurethane
• Component: Rear Trailing Arm Bushing Set
• High durability construction for harsh terrain and daily commuting
• Reduces deflection and improves throttle and braking response
• Retains OEM levels of noise and cabin isolation

Fits 2004-2006 Pontiac GTO Base.

The SuperPro SPF0756CK bushing kit is a high-performance replacement for the factory front arm-to-strut rod (lower radius arm) bushings. Engineered to address the common failures of standard rubber components, these polyurethane bushings provide a more precise connection between the radius arm and the control arm, significantly improving steering feel and maintaining correct suspension geometry during heavy braking and cornering.

• Proprietary Polyurethane: Made with SuperPro's engineering-grade formula for a quieter, longer-lasting alternative to rubber.
• Durability: Unaffected by extreme temperatures, oils, water, or coolant.
• Improved Dynamics: Enhances handling, steering response, and tire wear by reducing unwanted suspension movement.
• Proven Engineering: Designed, engineered, and manufactured in Australia for superior quality and service life.
• Lifetime Warranty: Backed by a manufacturer lifetime warranty for total peace of mind.

This kit replaces worn OE bushings to restore factory alignment and performance. Manufacturer Part Number: SPF0756CK.

Fits select 1967-1993 Volvo 142, 144, 145, 240, 242, 244, 245, 262, 264, and 265 models.

SuperPro polyurethane bushings are engineered to solve the inherent flaws of factory rubber components. As original equipment bushings age, they allow excessive deflection and movement in the rear suspension, leading to slower steering response, a disconnected road feel, and irregular tire wear. This Rear Upper Trailing Arm Bushing Set (Parallel Eye) replaces those worn components with a material that maintains its shape under load without compromising ride quality.

Designed and tested in Australia's demanding terrain, these bushings deliver superior performance for both daily commuting and track environments. The proprietary material composition ensures that you retain OEM levels of noise, vibration, and harshness (NVH) isolation while gaining much-needed stability and precision in the rear-end geometry.

• Manufacturer Part Number: SPF0727K
• Location: Rear Upper Trailing Arm
• Configuration: Parallel Eye
• Material: High-grade performance polyurethane
• Resistant to oils, chemicals, and extreme weathering
• Optimizes suspension geometry and tire contact patch
• Direct replacement for factory bushings

Fits select 1975-1993 Volvo 240, 242, 244, 245, 262, 264, and 265 models.

The rear lower trailing arm forward bushing is a critical pivot point that dictates the alignment and response of your Volvo's rear suspension. Over time, original equipment rubber bushings degrade, resulting in significant deflection, vague steering response, and accelerated tire wear. This SuperPro polyurethane kit replaces the worn factory components to restore handling precision and maintain proper suspension geometry under load.

Engineered and tested in Australia's demanding environments, SuperPro bushings are designed to bridge the gap between track-ready performance and daily-driver comfort. These bushings provide superior durability over rubber without compromising the noise, vibration, and harshness (NVH) isolation necessary for a refined cabin experience.

• Improved Handling: Reduces deflection at the trailing arm pivot for more predictable cornering and braking.
• Durability: High-grade polyurethane construction resists oil, road salt, and environmental degradation better than standard rubber.
• Ride Quality: Proprietary material composition maintains OEM levels of cabin isolation while increasing service life.
• Precision Fit: Engineered as a direct replacement for factory bushings to ensure a straightforward installation process.
• Part Number: SPF0639K

Fits select 1975-1993 Volvo 240, 242, 244, 245, 262, 264, and 265 models.

Control arm bushings serve as the critical pivot points between your vehicle's core suspension components. Over time, original rubber bushings soften and perish, leading to significant deflection, a vague steering feel, and accelerated tire wear. The SuperPro SPF0638K kit replaces the front lower inner rearward bushings with a proprietary polyurethane formula designed to restore steering precision and suspension geometry.

Engineered and manufactured in Australia to withstand harsh conditions, these bushings provide a superior alternative to rubber. They are formulated to maintain OEM levels of cabin isolation and comfort while offering the durability required for upgraded wheel and brake packages. SuperPro's engineering-grade material is inherently resistant to oils, coolants, and extreme temperature fluctuations that typically degrade factory components.

• Direct replacement for front lower inner rearward control arm bushings
• Improves steering response and braking stability by reducing deflection
• Proprietary polyurethane formula resistant to oils, water, and chemicals
• Designed to maintain factory NVH (Noise, Vibration, and Harshness) levels
• Australian engineered for maximum durability
• Manufacturer Part Number: SPF0638K
• Lifetime Warranty

Fits select 1975-1993 Volvo 240, 242, 244, 245, 262, 264, and 265 models.

The SuperPro SPF0637K Front Lower Inner Forward Control Arm Bushing Kit is engineered to eliminate the deflection and steering vagueness common in aging Volvo 200-series suspension systems. Unlike factory rubber bushings that soften and tear over time, these proprietary polyurethane replacements maintain consistent alignment geometry under load. This results in sharper turn-in and more predictable handling, making it an essential upgrade for daily drivers and performance-oriented builds alike.

Developed and manufactured in Australia, SuperPro bushings utilize an engineering-grade formula that resists the breakdown typically caused by extreme temperatures, road salt, oils, and coolants. This kit is specifically designed to handle the increased loads from wider wheel and tire packages or upgraded braking systems while maintaining OE levels of noise and vibration isolation.

• Precision-engineered for the front lower inner forward control arm position
• Proprietary engineering-grade polyurethane formula for superior durability
• Resistant to oils, water, coolant, and extreme temperature cycles
• Reduces suspension deflection for improved steering response and tire wear
• Includes all necessary bushings for the forward mounting point
• Manufacturer Part Number: SPF0637K
• Lifetime Warranty

Fits select 2008-2017 Chevrolet SS and Pontiac G8 (Base, GT, GXP).

Restore chassis response and eliminate suspension play with the SuperPro 18mm Rear Sway Bar Mount Bushing Kit. Factory rubber bushings are prone to compression and degradation, which compromises sway bar effectiveness and leads to a loose, disconnected feeling during cornering. These SuperPro bushings provide a durable, high-performance upgrade designed specifically to integrate with your vehicle's OEM hardware and mounting points.

Engineered with proprietary grease retention technology, these bushings ensure smooth, silent operation and a long service life without the frequent maintenance typical of generic polyurethane components. This direct-fit kit is a permanent solution to maintain proper sway bar alignment and improve body control.

• Bore Diameter: 18mm
• Position: Rear
• Features internal grease retention grooves for quiet, maintenance-free performance
• Direct replacement for OE rubber bushings, utilizing factory mountings
• Manufacturer Part Number: SPF0613-18K

Fits select 1967-1993 Volvo 142, 144, 145, 240, 242, 244, 245, 262, 264, and 265 models.

The Panhard rod is a critical component for maintaining lateral axle alignment in your Volvo's rear suspension. When factory rubber bushings degrade, they allow excessive axle shift and deflection, resulting in vague steering response, wandering, and uneven tire wear. The SuperPro SPF0522K Rear Panhard Rod Bushing Kit replaces these soft components with high-performance polyurethane for a more stable, predictable drive.

Engineered and tested in the demanding environments of Australia, SuperPro bushings are designed to provide superior durability and suspension geometry retention. This kit restores the mechanical link between the axle and the chassis, improving road manners without introducing the harshness often associated with inferior polyurethane materials. It is an essential upgrade for both daily-driven classics and vehicles equipped with larger wheels and tires that put additional stress on the suspension.

• Manufacturer Part Number: SPF0522K
• Position: Rear Panhard Rod
• Material: Proprietary SuperPro Polyurethane
• Reduces lateral axle movement and tire scrub
• Restores steering precision and suspension predictability
• Maintains OEM levels of noise, vibration, and harshness (NVH) isolation

Fits select 1991-1997 Toyota Land Cruiser and Lexus LX450 models.

SuperPro front Panhard rod bushings provide a vital pivot point in your vehicle's steering and suspension geometry. Over time, original rubber bushings degrade, causing excessive deflection that manifests as steering wander, slow handling response, and irregular tire wear. This SPF0445K set is designed to restore steering precision and maintain axle alignment under both on-road and off-road loads.

Engineered and tested in the Australian Outback, SuperPro's proprietary polyurethane material offers a significant durability upgrade over OEM rubber. This is especially critical for vehicles equipped with larger wheels, heavier tires, or suspension lifts, which place higher stress on the Panhard rod. These bushings are formulated to deliver superior road manners and sharp handling without sacrificing ride quality or increasing noise, vibration, and harshness (NVH).

• Manufacturer Part Number: SPF0445K
• Material: High-grade polyurethane for maximum service life
• Location: Front Panhard Rod (Track Bar)
• Performance: Reduces component deflection to eliminate "sloppy" steering
• Comfort: Engineered to maintain OEM levels of isolation

Vehicle Fitment:

• 1991-1997 Toyota Land Cruiser Base
• 1996-1997 Lexus LX450 Base

Fits 1991-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450 (Base).

The radius arm-to-chassis bushings are critical pivot points in your front suspension. Worn factory bushings allow for excessive deflection, leading to vague steering, wandering at highway speeds, and irregular tire wear. These issues are often magnified in vehicles equipped with larger wheels, heavier tires, or off-road modifications. The SuperPro SPF0440K kit provides a durable polyurethane solution designed to restore chassis stability and steering precision.

Engineered and tested in the demanding Australian Outback, SuperPro polyurethane components are formulated to withstand extreme conditions without the harshness often associated with performance bushings. This kit delivers improved road manners and response while maintaining OEM levels of noise, vibration, and harshness (NVH) isolation.

• Precision Handling: Minimizes dynamic movement to provide a more stable and predictable drive.
• Advanced Polyurethane: Offers superior durability and resistance to oils and environmental factors compared to rubber.
• Optimized Design: Specifically engineered to handle the increased loads of oversized wheels and tires.
• Direct Fit: Replaces factory front rearward radius arm-to-chassis bushings.
• Part Number: SPF0440K