Fits 1991-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450.

The SuperPro SPF0396K Front Forward Radius Arm-to-Differential Bushing Set is a high-performance replacement for worn-out factory rubber components. These bushings are critical for maintaining front axle alignment and steering geometry, particularly during braking or under the stresses of off-road articulation. Built from SuperPro's proprietary engineering-grade polyurethane, these bushings provide the stability and precision of a performance material without the noise and vibration often associated with lower-grade poly alternatives.

• Proprietary polyurethane formula resistant to oils, coolant, water, and extreme temperatures
• Maintains precise steering geometry and improves tire wear
• Engineered to provide a superior service life compared to OEM rubber
• Designed, tested, and manufactured in Australia
• Manufacturer Part Number: SPF0396K

Vehicle Fitment

Fits select 1979-2021 BMW 3-Series, 5-Series, 6-Series, M3, M5, Z3, and Z4.

Rear sway bar mount bushings are critical for anchoring the stabilizer bar and maintaining precise body control. Over time, factory rubber bushings soften and degrade, resulting in excessive play, reduced sway bar effectiveness, and a loose, disconnected feeling in the suspension. The SuperPro SPF0339-24K bushing set is engineered to replace worn OE components and restore chassis response.

These 24mm bushings are designed specifically to integrate with factory mounting brackets and hardware, avoiding the fitment issues common with generic universal sets. Each bushing incorporates advanced grease retention technology to ensure smooth, silent operation and a long service life. By providing a more secure mounting point for the rear sway bar, this set improves lateral stability and maintains consistent handling characteristics.

• Bore Diameter: 24mm
• Optimized for rear sway bar mounting positions
• Engineered to fit OEM brackets and mounting points
• Grease retention grooves for lifetime silent operation
• Resistant to oils, road chemicals, and weathering
• Manufacturer Part Number: SPF0339-24K

Fits select 1958-1980 Austin Healey 3000, Sprite, and MG MGB, Midget models. This SuperPro Front Upper Control Arm Outer Bushing Kit is engineered to restore steering precision and eliminate the deflection common in aged factory rubber components. Over time, original bushings perish, leading to sloppy handling, irregular tire wear, and diminished braking stability. By upgrading to proprietary polyurethane, you ensure your classic vehicle maintains correct alignment geometry under load.

SuperPro utilizes an engineering-grade polyurethane formula that remains unaffected by extreme temperatures, engine oils, water, or coolant. This kit provides a more durable, longer-lasting alternative to standard rubber while retaining comfortable ride quality and isolating the cabin from excessive noise and vibration. Designed and manufactured in Australia, these bushings are built to withstand the rigors of both daily driving and track use.

• Replaces worn OE bushings to eliminate suspension deflection and sloppy steering
• Proprietary engineering-grade polyurethane formula for superior durability
• High resistance to automotive fluids including oils, water, and coolant
• Maintains original NVH (Noise, Vibration, and Harshness) levels
• Manufacturer Part Number: SPF0282K
• Includes: Polyurethane bushings and necessary inner tubes
• Lifetime Warranty
• Made in Australia

Fits select 1980-2007 Toyota, Lexus, and Subaru vehicles including the Toyota Land Cruiser, Corolla, and Camry, Lexus LX450 and LX470, and Subaru Legacy.

Rear sway bar link bushings are critical components that maintain suspension geometry during cornering and articulation. Factory rubber bushings often soften or perish over time, leading to excessive body roll, vague steering response, and unwanted suspension noise. This SuperPro bushing kit (SPF0280K) replaces those worn components with high-performance polyurethane for a more connected driving experience and restored handling precision.

Engineered from SuperPro’s proprietary polyurethane compounds, these bushings are designed to provide a lifetime of maintenance-free performance. Unlike rubber, these compounds do not degrade with age or exposure to oil and road salts, ensuring that your sway bar link stays properly aligned for the life of the vehicle. This kit is an effective upgrade for both daily driving and off-road applications where consistent suspension behavior is required.

• Manufacturer Part Number: SPF0280K
• Position: Rear Sway Bar End Link
• Material: Proprietary maintenance-free polyurethane
• Features: High-articulation design with lifetime durability
• Performance: Reduces bushing deflection and improves sway bar response

Fits select 2003-2024 Toyota 4Runner, Tacoma, FJ Cruiser, and Lexus GX460/GX470.

The SuperPro RS002 ReadyStrut Top Cap is a high-performance replacement for original equipment (OE) strut tops. As a critical link between the strut assembly and the chassis, the upper mount significantly influences steering precision and braking stability. Replacing worn rubber mounts with these Australian-engineered polyurethane versions restores handling feel and maintains proper suspension alignment.

Manufactured using SuperPro’s proprietary polyurethane mix, these mounts are designed to withstand high temperatures and resist abrasion better than standard rubber components. This durability is essential for vehicles operating in harsh environments or those equipped with upgraded suspension systems. Each mount is engineered to reduce harshness while enhancing overall vehicle control and service life.

• Direct replacement for factory front upper strut mounts
• Proprietary polyurethane material for superior durability and temperature resistance
• Engineered to improve steering and braking response
• Designed, tested, and manufactured in Australia
• Manufacturer Part Number: RS002
• Sold individually (ReadyStrut Caps)
• 3-year manufacturer warranty

Fits 2022-2025 Subaru WRX Base, GT, Limited, and Premium models.

The SuperPro Roll Control 22mm adjustable rear sway bar is designed to neutralize body roll and sharpen the chassis response of the current-generation Subaru WRX. By utilizing multiple end link mounting positions, this bar allows for a 30-50% increase in stiffness over the original equipment (OE) component. This adjustability enables drivers to fine-tune the handling balance—dialing out factory understeer for more rotation during technical driving or maintaining a neutral set-up for high-speed track stability.

Engineered for a precise factory-fit, each bar is constructed from high-quality spring steel and features a durable four-step finishing process. This includes a zinc treatment, epoxy coating, and a two-stage powder coat to ensure long-term corrosion resistance even in harsh environments.

• Adjustable Rates: Variable end link positions allow for 30-50% stiffness increase over OE.
• Corrosion Protection: Heavy-duty four-step finish with zinc, epoxy, and two-stage powder coating.
• Performance Tuning: Reduces body roll and allows for precise chassis balance adjustment with common hand tools.
• Direct Fitment: Precision-formed to utilize factory mounting points for a straightforward installation.
• MPN: RC0132RZ-22

Fits select 2003-2024 Toyota 4Runner, Tacoma, FJ Cruiser, and Lexus GX470 models without the Kinetic Dynamic Suspension System (KDSS).

The SuperPro Roll Control Front Sway Bar Kit is engineered to correct the handling deficiencies of lifted or heavy-duty 4WD vehicles. By compensating for a higher center of gravity, this kit reduces body roll during cornering and load-carrying applications without sacrificing suspension articulation. The adjustable, multi-position bar allows you to fine-tune the handling balance and neutralize factory understeer using standard hand tools.

Built to withstand harsh off-road environments, each bar undergoes a rigorous four-step finishing process. This includes a protective zinc treatment, an epoxy coating, and a two-stage powder coat for maximum corrosion resistance. This kit is designed to bolt directly to factory mounting points for a precise fitment.

• Part Number: RC0127FZ-30
• Reduces body roll and improves chassis stability
• Multi-position adjustable design for custom handling balance
• Four-step finish: Zinc treatment, epoxy coating, and two-stage powder coat
• Neutralizes factory understeer and improves tire contact patch
• Engineered for no loss of comfort or suspension travel

Fits select 2022-2026 Audi A3 Quattro, Audi S3, and Volkswagen Golf R.

The SuperPro Roll Control rear sway bar kit is engineered to transform the handling dynamics of your vehicle by significantly reducing body roll and increasing cornering stability. This 24mm heavy-duty bar features a 2-position adjustable design, allowing you to increase the sway bar rate by 30% to 50% over the original equipment. By simply changing the end link mounting position, you can fine-tune your chassis balance to eliminate understeer or induce more rotation for autocross and track applications.

Constructed for durability and precision, this kit includes heavy-duty end links designed to maintain alignment under high lateral loads, ensuring consistent performance. Whether you are seeking a neutral balance for high-speed track work or a more aggressive turn-in for spirited street driving, this kit provides the adjustability needed to customize your vehicle's behavior with standard hand tools.

• Manufacturer Part Number: RC0126RZ-24
• Diameter: 24mm solid spring steel construction
• 2-Position adjustability for 30-50% stiffness increase over OE
• Includes heavy-duty adjustable end links for increased load capacity
• Reduces body roll and improves chassis response
• Direct bolt-on installation with included hardware and bushings

Fits 1991-1997 Toyota Land Cruiser and Lexus LX450 (Base).

The SuperPro Roll Control Front Sway Bar Kit (RC0070F-30) is engineered to solve the inherent body roll and stability issues of the 80 Series chassis, particularly in load-carrying or towing applications. This 30mm heavy-duty bar improves handling by compensating for the vehicle's high center of gravity, delivering flatter cornering and increased tire life. Unlike generic upgrades, SuperPro bars are designed to maintain off-road articulation when used with correctly sized links, ensuring you do not sacrifice suspension travel for on-road performance.

Each sway bar is precisely formed for a factory-fit and features a robust four-step finishing process. This includes a protective zinc treatment, an epoxy coating, and a two-stage powder coat to ward off corrosion in harsh off-road and winter environments. This kit provides the necessary hardware to dial in a neutral handling balance while maximizing compatibility with factory mounting points.

• Diameter: 30mm Heavy-Duty (HD) solid construction
• Finish: Four-step zinc, epoxy, and two-stage powder coat for superior corrosion resistance
• Performance: Reduces body roll and improves stability during towing or heavy loading
• Fitment: Designed for factory mounting points; maintains articulation and comfort
• Manufacturer Part Number: RC0070F-30

Fits select 1998-2005 Lexus GS300, GS400, and GS430 models (Base trim).

Improve cornering stability and reduce body roll with the SuperPro Roll Control Heavy Duty Front Sway Bar Kit. This 30mm bar replaces the factory stabilizer to provide more predictable handling and increased grip during spirited driving or track use. The multi-position design allows for easy adjustability, enabling owners to increase sway bar rates between 30% and 50% over original equipment by simply relocating the end link positions.

Built to withstand harsh conditions, SuperPro sway bars feature a robust four-step finish consisting of a zinc treatment, epoxy coating, and a two-stage powder coat. This provides superior corrosion resistance while maintaining a high-quality appearance. Every bar is precisely formed for a direct factory fit, allowing for straightforward installation with common hand tools.

• Manufacturer Part Number: RC0056F-30
• Bar Diameter: 30mm
• Construction: Heavy Duty (HD) steel
• Adjustability: Multi-position (30-50% rate increase over OE)
• Finish: Four-step zinc and two-stage powder coat
• Fitment: 1998-2005 Lexus GS chassis (S160)

Fits select 2015-2023 Audi A3 Quattro, S3, RS3, and Volkswagen Golf Alltrack and Golf R.

The SuperPro Roll Control adjustable sway bar kit is engineered to reduce body roll and sharpen steering response without sacrificing ride quality. This 26mm front sway bar allows you to increase effective bar rates by 30-50% over the original equipment by simply adjusting the end link positioning. This adjustability enables drivers to fine-tune the handling balance and mitigate understeer using common hand tools.

Constructed for a precision factory fit, each bar features a robust four-step protection process: a zinc treatment followed by an epoxy coating and a two-stage powder coat. This ensures maximum resistance against corrosion and road debris in harsh driving conditions. The kit includes heavy-duty end links designed to work in harmony with the increased rates of the 26mm bar.

• Part Number: RC0052FZ-26KIT
• Diameter: 26mm
• Adjustment Range: 30-50% stiffness increase over OE
• Finish: Four-step zinc, epoxy, and two-stage powder coat
• Included Hardware: Adjustable sway bar and matching end link set
• Fitment: Direct replacement for factory front sway bar

Fits 1993-1998 Toyota Supra (Base / Twin Turbo).

The SuperPro Roll Control adjustable front sway bar is designed to significantly reduce body roll and sharpen cornering response. By replacing the factory bar with this 30mm heavy-duty alternative, drivers can achieve a 30-50% increase in sway bar rate over the original equipment. The two-position adjustment points allow for precise chassis tuning using common hand tools, enabling you to dial in the ideal balance of understeer or oversteer for either weekend autocross or high-speed track use.

Built for durability and fitment accuracy, this sway bar is precisely formed for a factory-style fit while maximizing compatibility with existing suspension components. Each bar undergoes a comprehensive four-step finishing process—including a zinc treatment, epoxy coating, and a two-stage powder coat—to ensure maximum corrosion resistance even in harsh environments.

• Part Number: RC0020FZ-30
• Diameter: 30mm
• Adjustment: 2-Position (30-50% stiffer than OE)
• Construction: High-strength steel with 4-step anti-corrosion finish
• Includes: Sway bar and necessary hardware for installation
• Benefits: Reduced body roll, improved grip, and adjustable chassis balance

Fits select 2008-2021 Subaru Impreza, WRX, STI, Forester, Legacy, Outback, and Crosstrek models.

The SuperPro Roll Control rear sway bar is engineered to reduce body roll and sharpen cornering response without compromising ride quality. This 24mm heavy-duty bar features three adjustment points, allowing you to increase the effective sway bar rate by 30-50% over the original equipment (OE) setup. By changing the end link mounting position, you can fine-tune the chassis balance to neutralize understeer or induce rotation, tailoring the car's behavior for daily driving, autocross, or high-speed track work.

Each bar is precisely formed for a factory-style fit and features a robust four-step protection process. This includes a zinc treatment, an epoxy coating, and a two-stage powder coat to ensure maximum resistance against corrosion and road debris in harsh environments.

• Diameter: 24mm
• Adjustability: 3-Position (30-50% rate increase over OE)
• Finish: 4-Step anti-corrosion coating (Zinc, Epoxy, 2-Stage Powder Coat)
• Installation: Bolts to factory mounting points with common hand tools
• Manufacturer Part Number: RC0013RZ-24

Fits select 2006-2018 Audi A3 Quattro and TT Quattro, and Volkswagen Golf R, R32, and Tiguan models.

The SuperPro Roll Control rear sway bar kit is engineered to reduce body roll and sharpen cornering response without compromising ride quality. Featuring a 26mm diameter and two-position adjustability, this bar allows you to increase sway bar rates by 30-50% over the original equipment. This range of adjustment lets you fine-tune your vehicle's handling balance to suit your driving style or specific track conditions using standard hand tools.

Each bar is precisely cold-formed for an exact factory fit. To ensure long-term durability in all environments, SuperPro utilizes a specialized four-step finish consisting of a zinc treatment, epoxy coating, and a two-stage powder coat. This provides superior corrosion resistance and a professional appearance that lasts.

• Part Number: RC0006RZ-26
• Diameter: 26mm
• Position: Rear
• Adjustment: 2-Position (30-50% rate increase over OE)
• Material: High-strength spring steel
• Finish: Four-step zinc and powder coat process
• Installation: Bolts to factory mounting points

Fits select 2008-2017 Chevrolet Caprice PPV and 2008-2009 Pontiac G8 (Base, GT, GXP).

The SuperPro Front 30mm 4-Position Adjustable Sway Bar Kit is engineered to transform the handling characteristics of your vehicle by significantly reducing body roll and maintaining maximum tire contact during cornering. Constructed from race-spec chromoly with a progressive design, this sway bar is 30% lighter than traditional alternatives, reducing unsprung weight for better suspension response. The 4-position adjustability allows drivers to fine-tune the handling balance using common hand tools, making it ideal for both daily driving and track use.

To ensure long-term durability, SuperPro utilizes a four-step finishing process including a zinc treatment, epoxy coating, and a two-stage powder coat to resist corrosion in harsh environments. Designed and tested in Australia, this kit bolts directly to factory locations for a precise fit.

• Manufacturer Part Number: RC0001FZ-30
• Diameter: 30mm
• Adjustment: 4-Position adjustable
• Material: Race-spec Chromoly
• Finish: Zinc treated, epoxy coated, and two-stage powder coated
• Weight: 30% lighter than standard solid bars
• Origin: Designed, tested, and made in Australia
• Includes: Sway bar and necessary bushings/hardware

Fits 2006-2015 Mazda MX-5 Miata (all submodels including Sport, Grand Touring, Club, SV, and 25th Anniversary Edition).

The SuperPro KIT6000K is a comprehensive suspension bushing overhaul designed specifically for the NC-chassis MX-5 Miata. This master kit replaces soft or degraded factory rubber bushings with high-performance polyurethane, significantly reducing suspension deflection and improving steering precision. This "Standard Alignment" kit provides a direct replacement for non-adjustable factory units, making it an ideal foundation for street performance or track-day builds where factory alignment adjustment ranges are sufficient.

Engineered for a massively extended service life compared to OE rubber, these bushings offer superior resistance to oils and environmental factors while maintaining ride quality. This kit specifically addresses both the front and rear suspension geometry for a total chassis refresh.

• Front Lower Control Arm - Inner Front Bushing Kit
• Front Lower Control Arm - Inner Rear Bushing Kit
• Front Upper Control Arm - Inner Bushing Kit
• Front Lower Shock-to-Control Arm Bushing Kit
• Rear Lower Control Arm - Inner Bushing Kit
• Rear Toe Control Arm - Inner Bushing Kit
• Rear Lower Trailing Arm - Fore & Aft Bushing Kit
• Rear Differential Center Support Bushing Kit (70A Durometer)
• Manufacturer Part Number: KIT6000K

Fits 2006-2015 Mazda MX-5 Miata (All Trims).

The SuperPro KIT6000AK is a comprehensive suspension overhaul designed to replace worn OE rubber bushings with high-performance polyurethane components. This master kit provides a significant upgrade in steering response, chassis feedback, and overall handling by reducing unwanted suspension deflection. Unlike standard replacement kits, the KIT6000AK includes alignment-adjustable bushings that allow for additional positive caster and fine-tuning of negative camber, making it an essential upgrade for lowered vehicles or track-oriented setups.

Engineered for a massive service life, these bushings are resistant to oils, road grime, and extreme weather conditions. The kit also includes a higher-durometer 80A rear differential center support bushing kit to minimize drivetrain movement and improve power delivery to the wheels.

• MPN: KIT6000AK
• Kit Includes:
• Front Lower Control Arm - Inner Front Bushing Kit
• Front Lower Control Arm - Caster Offset Inner Rear Bushing Kit
• Front Upper Control Arm - Camber Adjustable Inner Bushing Kit
• Front Lower Shock-to-Control Arm Bushing Kit
• Rear Lower Control Arm - Inner Bushing Kit
• Rear Toe Control Arm - Inner Bushing Kit
• Rear Lower Trailing Arm - Fore & Aft Bushing Kit
• Rear Differential Center Support Bushing Kit (80A Durometer)

Fits select 2006-2023 Audi A3, RS3, S3, and TT, and Volkswagen CC, Eos, Golf, GTI, Jetta, Passat, and Tiguan (2.0T).

The SuperPro KIT5238RK is a comprehensive "Fast Road" rear suspension upgrade designed to replace worn factory bushings and sharpen handling without sacrificing daily drivability. This all-in-one-box solution uses optimized polyurethane durometers in critical pivot points to reduce bushing deflection and maintain proper suspension geometry during cornering, while preserving the compliant ride and cabin isolation expected from a street-driven Volkswagen or Audi.

As an alternative to the higher-durometer Motorsport version, this kit is specifically engineered for drivers seeking elevated performance for spirited driving while maintaining OE-level comfort. It integrates seamlessly with SuperPro front control arms or other front-axle upgrades to provide a balanced, predictable chassis response.

This kit includes bushings for the following locations:

• Rear Control Arm Upper-Inner
• Rear Control Arm Upper-Outer
• Rear Control Arm Lower-Inner Front
• Rear Control Arm Lower-Front Outer
• Rear Control Arm Lower-Rear Inner
• Rear Control Arm Lower-Rear Outer
• Rear Trailing Arm Front

Manufacturer Part Number: KIT5238RK

Fits 1998-2007 Lexus LX470 and Toyota Land Cruiser Base models.

The SuperPro KIT238K Master Vehicle Kit is a comprehensive suspension solution designed to restore precision and durability to your vehicle's chassis. By replacing worn or soft factory rubber bushings with SuperPro’s proprietary polyurethane formula, this kit significantly improves handling, alignment stability, and steering feedback. Unlike standard rubber, these bushings are engineered to resist oil, chemicals, and extreme weathering, ensuring they maintain their physical properties for the life of the vehicle.

This kit provides a complete overhaul for both front and rear suspension points, eliminating the "mushy" feeling often found in aging 100-series platforms. It is an essential upgrade for owners looking to maintain proper tire wear and suspension geometry during both daily driving and off-road use.

• Manufacturer Part Number: KIT238K
• Kit Position: Front and Rear
• Material: High-grade proprietary polyurethane
• Includes all necessary bushings for a full vehicle refresh
• Engineered to provide improved stability without excessive noise, vibration, or harshness (NVH)

Fits select 2003-2015 Lexus GX470 and Toyota 4Runner, FJ Cruiser, and Tacoma.

The factory rubber bushings on independent front suspension (IFS) vehicles are prone to deterioration over time, leading to compromised steering geometry, vague handling, and accelerated tire wear. The SuperPro KIT180K replaces these soft OE components with high-durability polyurethane, maintaining precise control over the front lower control arm alignment even under heavy loads or with increased ride heights from lift kits.

This kit is engineered for drivers who have fitted larger wheels and tires or those who subject their suspension to the stresses of off-roading. Unlike standard rubber, SuperPro's proprietary engineering-grade polyurethane formula is resistant to extreme temperatures, oils, water, and coolant, ensuring a longer service life and consistent performance without the noise often associated with lesser poly bushings.

• Includes both front-position and rear-position bushings for the front lower inner control arms
• Proprietary engineering-grade polyurethane formula for superior durability
• Resistant to oils, water, coolant, and environmental extremes
• Designed and manufactured in Australia
• Manufacturer Part Number: KIT180K
• Lifetime Warranty

Vehicle Fitment:

Fits 2008-2017 Chevrolet Caprice PPV, Chevrolet SS, and Pontiac G8 (Base, GT, and GXP).

The SuperPro Quick Fit Traction Pack is a comprehensive upgrade designed to eliminate excessive drivetrain movement and subframe deflection. By combining reinforced rear differential mount bushings with precision-engineered subframe inserts, this kit provides a significant increase in traction during hard launches and improved stability while powering out of corners. Unlike full-replacement polyurethane bushings that require labor-intensive pressing of the factory components, this kit uses supplemental void fillers that work with the OEM bushings for a faster, easier, and reversible installation.

The SuperPro KIT176K provides a more connected feel without the extreme harshness of solid mounts, making it an ideal solution for street-performance and track-day applications looking to resolve wheel hop and rear-end wander.

• Replaces soft factory differential mounts to stabilize the drivetrain
• Subframe void fillers minimize cradle movement under load
• Engineered for easier installation compared to full press-out bushing sets
• Durable polyurethane construction for long-lasting performance
• Includes: Rear Differential to Subframe Mount Bush Kit, Rear Subframe to Chassis Spacers, and Top/Bottom Subframe Void Fillers

Fits 2008-2017 Chevrolet Caprice PPV and 2008-2009 Pontiac G8 Base, GT, and GXP.

The SuperPro KIT175K Complete Vehicle Enhancement Bushing Kit is a comprehensive suspension solution designed to replace soft, worn-out factory rubber bushings with high-performance polyurethane. By upgrading both front and rear suspension points, this kit significantly improves steering response, reduces chassis flex, and ensures your vehicle maintains consistent alignment settings even under heavy cornering or braking loads.

Engineered for durability without compromising ride quality, SuperPro bushings are the ideal choice for restoring a precise feel or preparing your chassis for high-performance driving. This kit addresses common suspension deflection points to provide a more connected and stable driving experience.

• Manufacturer Part Number: KIT175K
• Application: Complete Front and Rear Enhancement
• Material: Proprietary high-grade polyurethane for superior service life
• Performance: Enhances handling, stability, and steering precision
• Compatibility: Direct replacement for OE rubber bushings

Vehicle Fitment

Fits select 2004-2013 Mazda 3 and 2004-2011 Volvo S40 and V50 models.

The SuperPro KIT170K Front and Rear Vehicle Master Bushing Kit is a comprehensive suspension overhaul designed to eliminate the vague steering and inconsistent geometry caused by soft or worn factory rubber bushings. This master kit provides a complete solution for drivers looking to restore or improve vehicle handling, stability, and tire longevity through superior material science.

• Alignment Correction: Engineered with caster and camber adjustment capabilities to correct suspension geometry, essential for lowered vehicles or performance-oriented alignments.
• Proprietary Polyurethane: Built using SuperPro’s advanced material for superior durability and resistance to road chemicals, oils, and weathering.
• Complete Vehicle Solution: As a Master Kit, this replaces critical bushings in both the front and rear suspension locations for a total handling transformation.
• Improved Steering Response: Reduces component deflection to provide sharper turn-in and better road feedback without the excessive harshness of racing-only kits.
• Manufacturer Part Number: KIT170K

Fits 2004-2011 Mazda RX-8 (Base, R3, Shinka, Grand Touring, Sport, Touring, and 40th Anniversary Edition).

The SuperPro Performance Alignment Master Bushing Kit (KIT158XK) replaces compliant factory rubber bushings to eliminate suspension deflection and maintain consistent geometry. This kit is designed for drivers who require precise handling and stable alignment settings under heavy cornering loads. By utilizing high-grade polyurethane, SuperPro provides a more direct connection between the chassis and the road without the harshness often associated with inferior materials.

• Engineered to maintain optimal wheel alignment for improved tire life and grip
• Reduces unwanted control arm movement for sharper steering response
• High-durability polyurethane construction resistant to oils, chemicals, and ozone
• Direct-fit replacement for worn original equipment bushings
• Optimized for performance street and track applications
• Manufacturer Part Number: KIT158XK

Fits 2004-2011 Mazda RX-8 across all trim levels including Base, R3, Grand Touring, and Shinka.

The SuperPro KIT158K Vehicle Enhancement Kit is a comprehensive suspension solution designed to replace soft, worn factory rubber bushings with high-performance polyurethane. By reducing excessive movement in the front and rear suspension arms, this kit maintains precise wheel alignment under cornering loads and improves overall steering feedback. Engineered for durability, these bushings are resistant to oils and road chemicals, ensuring long-lasting performance and improved chassis stability for your rotary-powered sports car.

• Complete front and rear vehicle enhancement bushing set
• Improves steering response and handling precision
• Maintains suspension geometry under high-load conditions
• Direct replacement for factory rubber components
• High-durability polyurethane construction
• Manufacturer Part Number: KIT158K

Fits 2003-2006 Mitsubishi Lancer Evolution (including MR, RS, and SE models).

The SuperPro KIT142K Vehicle Master Bushing Kit is a comprehensive suspension overhaul designed to restore chassis precision and sharpen the handling of the CT9A platform. By replacing soft, perished, or fluid-filled factory rubber bushings with high-grade polyurethane, this kit eliminates unwanted suspension geometry changes under heavy cornering and braking loads.

Engineered to provide a more direct connection to the road without the extreme NVH (noise, vibration, harshness) of solid mounts, these bushings ensure consistent alignment and improved steering feedback. This master kit provides a complete solution for both the front and rear of the vehicle, making it ideal for refreshing a high-mileage Evo or preparing a car for track use.

• Complete front and rear master bushing set
• Replaces compliant OE rubber with durable polyurethane
• Reduces suspension deflection for better alignment stability
• Improves steering response and chassis communication
• Resistant to oils, road salt, and environmental degradation
• Manufacturer Part Number: KIT142K

Fits 1990-1997 Mazda Miata (Base, LE, M Edition, SE, and STO).

The SuperPro KIT132NAK is a comprehensive alignment-adjustable suspension bushing kit designed specifically for the NA-generation Mazda Miata. This kit provides a complete overhaul for the vehicle's primary pivot points, replacing worn original equipment rubber with high-performance synthetic elastomer bushings. Unlike standard replacement kits, the KIT132NAK utilizes a combination of standard and double-offset bushings to allow for precision camber and caster adjustment at the front end and camber adjustment at the rear.

By installing this kit, you gain the ability to dial in specific alignment settings for track use or spirited driving while benefiting from improved steering feedback and more consistent suspension geometry. The advanced materials offer superior durability and resistance to chemicals and weathering compared to OEM rubber, ensuring a significantly extended service life.

• Front Control Arm Lower-Inner Front Bush Kit - Double Offset
• Front Control Arm Lower-Inner Rear Bush Kit - Double Offset
• Front Control Arm Upper-Inner Bush Kit
• Front and Rear Sway Bar Link Bush Kit
• Rear Control Arm Lower-Inner Bush Kit - Double Offset
• Rear Control Arm Lower-Outer Bush Kit
• Rear Control Arm Upper-Inner and Outer Bush Kit
• Manufacturer Part Number: KIT132NAK

Fits 1999-2005 Mazda Miata (NB) models, including Base, LS, Mazdaspeed, SE, Shinsen, and 10th Anniversary.

The SuperPro KIT131NBK Vehicle Enhancement Kit is a comprehensive suspension bushing solution for the NB-generation Miata. Designed to replace soft, fatigued factory rubber, this kit utilizes high-performance polyurethane to deliver superior handling, sharper steering response, and a significantly longer service life than OEM components. This "standard" non-adjustable kit is engineered for enthusiasts who want to restore and upgrade suspension geometry stability without the complexity of adjustable alignment bushings.

• Direct replacement for factory control arm bushings
• Improves cornering stability and steering feel
• Reduces unwanted suspension deflection under load
• Front Control Arm Lower-Inner Front Bush Kit
• Front Control Arm Lower-Inner Rear Bush Kit
• Front Control Arm Upper-Inner Bush Kit
• Rear Control Arm Lower-Inner Bush Kit
• Rear Control Arm Lower-Outer Bush Kit
• Rear Control Arm Upper-Inner and Outer Bush Kit
• Manufacturer Part Number: KIT131NBK

Fits 1993-1995 Mazda RX-7 Base, R1, R2, and Touring models.

The SuperPro KIT130K Vehicle Master Bushing Kit is a comprehensive suspension refresh designed to replace worn factory rubber with high-performance bushings. This kit is specifically engineered as a repair upgrade for standard or lowered vehicles that maintain factory alignment settings. By replacing the flexible OE bushings, this kit restores steering precision, stabilizes suspension geometry, and improves overall handling response without the need for specialized alignment correction components.

Kit Includes:

• Front Control Arm Upper-Inner Bush Kit
• Front Control Arm Lower-Inner Front & Rear Bush Kits
• Front Steering Rack & Pinion Mount Bushings (for Power Steering models)
• Rear Control Arm Upper-Inner Bush Kit
• Rear Differential To Crossmember Bush Kit
• Rear Toe Control Arm Inner & Outer Bush Kits
• Rear Trailing Arm Front To Crossmember Bushings
• Rear Shock Absorber Lower Bush Kit

Manufacturer Part Number: KIT130K

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring models).

The SuperPro Vehicle Master Bushing Kit (KIT130ADJK) is a comprehensive chassis overhaul designed for the FD-generation Mazda RX-7. This kit replaces compliant factory rubber with high-performance polyurethane bushings to eliminate unwanted deflection and maintain precise suspension geometry under load. Specifically engineered for performance-oriented or lowered vehicles, this set includes alignment correction bushings to provide maximum camber and caster adjustment, ensuring your tires maintain an optimal contact patch even with modified ride heights.

• Front Control Arm Upper-Inner Bush Kit
• Front Control Arm Lower-Inner Front Bush Kit (Adjustable)
• Front Control Arm Lower-Inner Rear Bush Kit (Adjustable)
• Front Steering Rack & Pinion Mount Bush (Power Steering models)
• Rear Control Arm Upper-Inner Bush Kit
• Rear Differential to Crossmember Bush Kit
• Rear Toe Control Arm Inner & Outer Bush Kits
• Rear Trailing Arm Front to Crossmember Bush Kit

By installing this master kit, you restore steering response and rear-end stability while gaining the adjustability needed for track or aggressive street alignments. For a complete suspension refresh, it is recommended to inspect and replace sway bar bushings and end links separately.