Fits select 1997-2008 Subaru (Forester, Impreza, Legacy, Outback) and Saab 9-2X.

SuperPro front control arm bushings are engineered to stabilize control arm movement and maintain precise suspension geometry under all driving conditions. Replacing worn factory rubber bushings with SuperPro polyurethane eliminates the dynamic changes in wheel alignment that cause erratic handling and premature tire wear. This kit serves as both a durable repair and a performance upgrade for street and enthusiast vehicles.

• Manufactured in Australia from SuperPro's proprietary engineering-grade polyurethane
• Resistant to extreme temperatures, oils, water, and engine coolant
• Provides a superior, longer-lasting alternative to standard rubber without excessive noise or vibration
• Designed for precise fitment into factory mounting locations
• Manufacturer Part Number: SPF2429K
• Limited Lifetime Warranty

Fits 2002-2006 Mini Cooper and Cooper S models.

Replace the soft or worn factory front engine mount bushing with this high-performance polyurethane component from SuperPro. The SPF2426K is designed to stabilize the engine within the chassis, reducing excessive powertrain movement during hard acceleration, braking, and gear changes. By limiting engine rock, this bushing helps maintain proper alignment of drivetrain components and improves throttle response and shifter feel.

Engineered and manufactured in Australia, SuperPro bushings are molded from a proprietary engineering-grade polyurethane formula. Unlike standard rubber, this material is unaffected by extreme temperatures, engine oils, water, or coolant, preventing the degradation that leads to premature mount failure. The design ensures better handling and steering geometry maintenance without the excessive noise, vibration, and harshness (NVH) often found in lesser aftermarket alternatives.

• Manufacturer Part Number: SPF2426K
• Material: Proprietary engineering-grade polyurethane
• Resistant to oils, coolants, and environmental contaminants
• Designed to stabilize engine position and powertrain alignment
• Direct fit for factory front engine mount housing
• Manufacturer Lifetime Warranty

Fits select 1991-2016 BMW 3 Series, X3, and Z4 models.

The SuperPro SPF2422K Rear Upper Inner Control Arm Bushing Kit provides a significant upgrade over factory rubber components. Engineered to maintain precise suspension geometry under lateral loads, these bushings improve handling and tire wear by reducing unwanted deflection. Unlike original equipment rubber, SuperPro’s proprietary engineering-grade polyurethane formula is resistant to degradation from oils, coolant, and extreme temperature fluctuations, ensuring consistent performance for the life of the vehicle.

• Proprietary polyurethane formula for durability and quiet operation
• Maintains consistent alignment and steering geometry
• Unaffected by extreme temperatures, oils, or road contaminants
• Designed, engineered, and manufactured in Australia
• Includes SuperPro's Lifetime Warranty
• Manufacturer Part Number: SPF2422K

Fits select 2002-2022 Chrysler, Dodge, Jeep, and Mitsubishi vehicles, including 200, Sebring, Avenger, Caliber, Journey, Compass, Patriot, Lancer, and Outlander.

SuperPro Front Lower Inner Forward Control Arm Bushing Kits are engineered to replace soft or failed factory rubber bushings. These polyurethane components stabilize the movement of the control arms, ensuring that critical suspension geometry is maintained under heavy cornering and braking. By preventing dynamic changes in wheel alignment, these bushings improve vehicle handling, steering response, and tire longevity.

The SPF2418K kit features SuperPro’s proprietary engineering-grade polyurethane formula, which provides a quieter and longer-lasting solution compared to standard rubber. Unlike OEM bushings, these are resistant to degradation from extreme temperatures, oils, water, and coolant, making them an ideal upgrade for both daily driving and performance applications.

• Replaces worn factory rubber for superior alignment stability
• Manufactured with proprietary engineering-grade polyurethane
• Unaffected by oils, coolant, or extreme temperatures
• Designed, engineered, and manufactured in Australia
• Includes manufacturer's Lifetime Warranty
• Manufacturer Part Number: SPF2418K

Fits 2000-2005 Toyota MR2 Spyder Base.

Control arm and trailing arm bushings serve as the vital pivot points between your suspension components and the chassis. Over time, factory rubber bushings degrade, causing excessive deflection that leads to sluggish steering response, a sloppy driving feel, and accelerated tire wear. This is particularly noticeable in vehicles equipped with grippier tire compounds or heavier aftermarket wheels.

The SuperPro Rear Trailing Arm Bushing Kit (SPF2398K) replaces these worn components with high-grade polyurethane, developed through decades of testing in Australia's most demanding environments. These bushings are engineered to restore suspension geometry and improve road manners without compromising cabin comfort. SuperPro designs their material compositions to retain OEM levels of noise, vibration, and harshness (NVH) isolation while providing the durability required for both daily commuting and spirited track use.

• Direct replacement for factory rear trailing arm bushings
• Proprietary polyurethane material for superior longevity and performance
• Reduces suspension deflection for more predictable handling
• Maintains original levels of ride comfort and cabin isolation
• Engineered and tested for harsh driving conditions
• Manufacturer Part Number: SPF2398K

Fits 2000-2005 Toyota MR2 Spyder Base.

Control arm bushings serve as the critical pivot points between your vehicle's core suspension components. Over time, factory rubber bushings soften and perish, leading to excessive deflection, vague steering response, and uneven tire wear. The SuperPro SPF2396K kit replaces the rear lower inner control arm bushings with a high-performance polyurethane alternative designed to maintain alignment geometry under load while preserving cabin comfort.

Engineered and manufactured in Australia, these bushings utilize a proprietary engineering-grade polyurethane formula. Unlike rubber, this material is resistant to extreme temperatures, oils, water, and coolant, ensuring a significantly longer service life and more consistent performance than standard OE components. This kit is an essential upgrade for restoring chassis communication and suspension predictability on the 2000-2005 MR2 Spyder.

• Direct replacement for worn OE rear lower inner control arm bushings
• Proprietary engineering-grade polyurethane formula for maximum durability
• Resistant to oils, chemicals, and environmental degradation
• Maintains factory levels of noise, vibration, and harshness (NVH) isolation
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF2396K
• Includes Lifetime Warranty

SuperPro rear lower inner toe control arm bushings replace worn factory rubber units to eliminate excessive suspension deflection. By stabilizing the toe link, this kit ensures more consistent alignment settings during cornering and braking, providing sharper steering response and preventing irregular tire wear.

Engineered from SuperPro's proprietary polyurethane formula, these bushings are resistant to extreme temperatures, oils, and coolants while maintaining OEM-level noise and vibration isolation. Designed and manufactured in Australia, they are built to withstand both daily commuting and the rigors of performance driving.

• Specifically designed for the rear lower inner toe control arm position
• Proprietary engineering-grade polyurethane formula
• Resistant to oils, water, and extreme temperatures
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF2395K
• Lifetime Warranty

Fits select 1993-2007 Subaru Impreza, Legacy, and Outback models, along with 2005-2006 Saab 9-2X. This SuperPro Rear Gearbox Crossmember Isolator Mount, also known as the Positive Shift Kit, is engineered to replace the soft factory rubber bushings that allow excessive drivetrain movement during acceleration and gear changes.

Constructed from SuperPro's proprietary engineering-grade polyurethane formula, these bushings provide a more rigid connection for the rear gearbox crossmember. By reducing flex, the kit delivers a more precise, "positive" gear shift feel and helps maintain proper drivetrain alignment under load. Unlike standard rubber, this material is unaffected by extreme temperatures, oils, or engine coolants, ensuring a significantly longer service life.

• Manufacturer Part Number: SPF2358K
• Proprietary polyurethane formula for high durability and quiet operation
• Reduces gearbox movement for improved shifting precision
• Resistant to oils, water, and extreme temperatures
• Designed, engineered, and manufactured in Australia
• Backed by a Lifetime Warranty

The SuperPro SPF2339K Front Radius Arm-to-Chassis Mount Bushing Set is a precision-engineered suspension upgrade designed to replace soft, worn-out factory rubber bushings. Fits 2004-2006 Pontiac GTO Base models, these bushings are critical for maintaining consistent steering geometry and caster settings during heavy braking and cornering.

Constructed from SuperPro's proprietary engineering-grade polyurethane, these bushings provide a superior alternative to OE rubber. They are formulated to remain unaffected by extreme temperatures, engine oils, water, or coolant, ensuring they won't perish or lose their durometer over time. This leads to sharper steering response, reduced tire wear, and a more stable front-end feel without the excessive NVH often associated with lesser polyurethane brands.

• MPN: SPF2339K
• Material: Proprietary engineering-grade polyurethane
• Placement: Front Radius Arm-to-Chassis Mount
• Warranty: Manufacturer Lifetime Warranty
• Origin: Designed, engineered, and manufactured in Australia

Each set includes the necessary bushings to refresh both the left and right sides of the vehicle. By upgrading to SuperPro, you ensure your GTO maintains proper alignment for improved safety and performance on the street or track.

Fits select 2001-2006 Acura RSX, Honda Civic, and Honda CR-V models.

The SuperPro SPF2308K control arm bushing set is engineered to stabilize suspension movement and maintain precise alignment geometry under heavy cornering and braking loads. Featuring a caster offset design, these bushings allow for fine-tuned steering geometry to improve directional stability and steering feel. By replacing compliant or worn factory rubber with SuperPro's proprietary engineering-grade polyurethane, you eliminate the dynamic toe and camber changes that accelerate tire wear and compromise handling.

• Caster Offset Design: Optimized geometry for improved steering response and high-speed stability.
• Advanced Polyurethane: Proprietary formula is resistant to extreme temperatures, oils, coolants, and road salt.
• Durability: Engineered to provide a quieter, longer-lasting alternative to OE rubber without excessive NVH.
• Precision Manufactured: Designed and produced in Australia for exact fitment and performance.
• Lifetime Warranty: Backed by the manufacturer for the life of the vehicle.
• Manufacturer Part Number: SPF2308K

Vehicle Fitment

Fits select 2001-2006 Acura RSX, Honda Civic, and Honda CR-V.

The SuperPro SPF2306K Front Lower Inner Control Arm and Rearward Bushing Set is engineered to eliminate the excessive deflection and dynamic alignment changes common with factory rubber bushings. By stabilizing the control arms, this kit ensures your vehicle maintains consistent suspension geometry during cornering and braking, resulting in sharper steering response and extended tire life.

Manufactured in Australia from a proprietary engineering-grade polyurethane, these bushings are a superior alternative to OEM rubber. They are specifically formulated to remain unaffected by extreme temperatures, oils, water, or coolant, providing a long-lasting performance upgrade without the noise or harshness typically associated with inferior materials.

• Proprietary polyurethane formula for maximum durability and performance
• Stabilizes control arm movement to maintain correct wheel alignment
• Direct replacement for factory front lower inner and rearward bushings
• High resistance to automotive fluids and environmental contaminants
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF2306K
• Includes a Limited Lifetime Warranty

Fits select 2002-2015 Mini Cooper models, including Base, S, Clubman, Coupe, Roadster, and John Cooper Works variants.

Sway bar mount bushings are critical components for maintaining vehicle body control. The factory rubber bushings often wear down, leading to a loose or sloppy suspension feel. SuperPro SPF2277-17K sway bar mount bushings are engineered to replace worn OE units, restoring precise handling and improving the effectiveness of the rear 17mm sway bar. Unlike universal alternatives, these bushings are designed to integrate seamlessly with factory mounting hardware.

Each bushing features advanced grease retention technology to ensure smooth, silent operation for the life of the vehicle. By upgrading to high-quality polyurethane, you eliminate the need for frequent maintenance and provide your suspension with a more durable anchoring point for better cornering stability.

• Part Number: SPF2277-17K
• Bushing Size: 17mm
• Location: Rear Sway Bar Mount
• Direct replacement for OE-style hardware
• Grease retention grooves for silent operation
• High-performance polyurethane construction

Fits select 2002-2015 Mini Cooper, Clubman, Coupe, Roadster, and John Cooper Works models.

Restore precise handling and eliminate front-end slop with the SuperPro 24mm Front Sway Bar Mount Bushing Set. Factory rubber bushings are prone to compression and degradation, which leads to reduced sway bar effectiveness and a loose, unresponsive steering feel. These SuperPro bushings are engineered as a high-performance, direct-fit replacement that integrates seamlessly with your Mini's original mounting hardware.

Unlike universal bushings, these are designed for specific vehicle geometry and feature advanced grease retention technology. Internal grooves keep lubricant where it is needed, ensuring a lifetime of silent, smooth operation without the constant maintenance required by lesser polyurethane alternatives.

• Vehicle Specific Fit: Engineered to utilize factory mounting points and hardware for a perfect 24mm fitment.
• Advanced Materials: Proprietary polyurethane blend resists oil, road salt, and heat better than OE rubber.
• Grease Retention: Internal bore design maintains lubrication for quiet performance.
• Optimized Control: Minimizes bushing deflection to maintain sway bar geometry under load.
• Manufacturer Part Number: SPF2276-24K

Fits 1990-1994 Lexus LS400 Base.

Restore handling precision and eliminate suspension slop with the SuperPro Rear Trailing Arm Rearward Bushing Kit. These polyurethane bushings replace the worn factory rubber components that serve as the vital pivot point for your LS400’s rear suspension. Over time, original bushings soften and deflect, leading to slower steering response, irregular tire wear, and a degraded driving experience.

Engineered and tested in Australia's harsh conditions, SuperPro bushings provide superior durability and performance without sacrificing ride quality. The advanced material composition is designed to maintain OEM levels of noise, vibration, and harshness (NVH) isolation while delivering more consistent suspension geometry under load.

• Direct replacement for OE rearward trailing arm bushings
• High-grade polyurethane construction for longevity
• Reduces unwanted deflection and movement
• Maintains factory comfort and cabin isolation
• Manufacturer Part Number: SPF2249K

Fits 1998-2007 Lexus LX470 and Toyota Land Cruiser (Base).

This SuperPro control arm bushing kit provides a high-performance alternative to standard rubber components. Designed specifically for the front lower inner forward position, these bushings utilize a proprietary engineering-grade polyurethane formula to maintain critical steering geometry and alignment under the heavy loads characteristic of full-size 4WD chassis. Unlike OEM rubber, which can perish and soften over time, SuperPro polyurethane is resistant to extreme temperatures, oils, coolant, and road debris, ensuring more precise handling and improved tire wear.

• Manufacturer Part Number: SPF2143K
• Position: Front Lower Inner Forward
• Material: Proprietary engineering-grade polyurethane
• Durability: Resistant to oils, water, and extreme environmental conditions
• Origin: Designed, engineered, and manufactured in Australia
• Warranty: Lifetime Warranty

Fits select 1988-1991 Honda Prelude (2.0 S, 2.0 Si, Si, and Si 4WS).

Suspension bushings serve as the critical pivot points for your control arms. Original rubber bushings often soften over time, leading to excessive deflection and dynamic changes in wheel alignment that compromise tire life and steering precision. The SuperPro SPF2133K kit replaces these worn components with high-performance bushings designed to maintain correct suspension geometry under load.

Engineered from a proprietary engineering-grade polyurethane formula, these bushings provide a superior alternative to standard rubber. They offer increased durability and better resistance to environmental contaminants without the excessive noise or vibration often associated with lower-quality poly bushings. This kit is a direct-fit solution for drivers looking to restore handling sharpness or upgrade their suspension for more spirited driving.

• Proprietary engineering-grade polyurethane for maximum service life
• Resistant to extreme temperatures, oils, coolant, and road salt
• Improves handling by reducing dynamic alignment changes
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF2133K
• Includes SuperPro Lifetime Warranty

Fits select 1961-1995 Chevrolet Corvette, Mazda RX-7, Nissan 260Z/300ZX/Maxima, Toyota 4Runner/Celica/Corolla/MR2/Pickup, and Volvo 1800 models.

The SuperPro Front Sway Bar Link Bushing Kit is a premium suspension upgrade designed to replace worn OE rubber bushings with high-performance polyurethane. Engineered to maintain correct steering geometry and improve vehicle handling, these bushings provide a quieter, more durable solution for both street and performance applications. Unlike rubber, SuperPro's proprietary engineering-grade polyurethane formula is unaffected by extreme temperatures, oils, water, or coolant, ensuring your alignment remains consistent over time.

• Proprietary polyurethane formula for increased service life and better handling.
• Resistant to oils, coolants, and harsh environmental contaminants.
• Designed, engineered, and manufactured in Australia.
• Improves tire wear and steering response by reducing deflection.
• Manufacturer Part Number: SPF2092BK
• Includes SuperPro's Lifetime Warranty.

Vehicle Fitment:

Fits select 1983-1991 Honda Accord and Prelude models. This SuperPro SPF2061K kit is designed to replace standard rubber bushings in the front upper inner control arms, providing a significant upgrade in suspension stability and durability.

Worn or soft rubber bushings allow for excessive arm movement and dynamic changes in wheel alignment, which negatively impacts steering precision and accelerates tire wear. SuperPro’s proprietary engineering-grade polyurethane formula maintains correct suspension geometry under load without the harshness often associated with performance bushings. These bushings are designed to withstand harsh environments and chemical exposure better than OE components.

• Optimized Geometry: Stabilizes control arm movement to maintain alignment and improve handling response.
• Polyurethane Construction: Resists degradation from extreme temperatures, oils, water, and coolant.
• Precision Fit: Replaces OE bushings with engineering-grade materials for longer service life.
• Provenance: Designed, engineered, and manufactured in Australia.
• Part Number: SPF2061K
• Warranty: Covered by SuperPro's Lifetime Warranty.

Fits 1990-1994 Volvo 740, 940, and 960 models.

The SuperPro SPF2013K Front Rearward Radius Arm-to-Chassis Mount Bushing Kit is engineered to replace worn, soft factory rubber bushings that often lead to steering wander and inconsistent alignment. By utilizing a proprietary engineering-grade polyurethane formula, these bushings maintain precise steering geometry and improve handling response under braking and cornering loads. Unlike standard rubber, SuperPro polyurethane is resistant to extreme temperatures, road salt, oils, and engine coolants, ensuring a significantly longer service life.

Designed and manufactured in Australia, these bushings provide a superior alternative for drivers looking to restore the structural integrity of their Volvo suspension without the harshness often associated with inferior aftermarket materials. The kit is a direct fit for the factory mount points, offering a quieter, more durable solution for high-mileage chassis.

• Manufacturer Part Number: SPF2013K
• Material: Proprietary engineering-grade polyurethane
• Placement: Front suspension, rearward radius arm-to-chassis mount
• Compatibility: Direct replacement for OE bushings
• Durability: Resistant to oils, water, and extreme temperatures
• Warranty: Manufacturer Lifetime Warranty

Fits select 1990-1994 Volvo 740, 940, and 960 models.

The SuperPro Front Lower Inner Forward Control Arm Bushing Kit (SPF2012K) is designed to replace soft or deteriorated factory rubber bushings to restore steering precision and maintain critical suspension geometry. While standard rubber bushings deflect under cornering and braking—leading to dynamic alignment changes and uneven tire wear—SuperPro’s proprietary engineering-grade polyurethane formula provides a more stable pivot point for the control arm.

• Advanced Material: Proprietary polyurethane formula is unaffected by extreme temperatures, engine oils, water, or coolant.
• Improved Dynamics: Stabilizes control arm movement to ensure correct wheel alignment and enhanced vehicle handling.
• Precision Engineering: Designed and manufactured in Australia for a direct-replacement fit on the front lower inner forward position.
• Long-Term Reliability: Engineered to provide a quieter, longer-lasting solution than traditional rubber components.
• Warranty: Backed by a Manufacturer Lifetime Warranty.

This kit is an essential service upgrade for Volvo owners experiencing steering vagueness or front-end instability, providing the durability needed for both daily driving and performance use.

Fits 1990-2005 Mazda Miata (10th Anniversary, Base, LE, LS, M Edition, Mazdaspeed, SE, Shinsen, and STO).

Restore handling precision and eliminate unwanted suspension deflection with the SuperPro Rear Lower Control Arm Outer Bushing Kit. These bushings are designed to stabilize the movement of the control arms, ensuring that correct wheel alignment geometry is maintained during cornering and heavy loading. While standard rubber bushings are prone to tearing and softening over time—leading to dynamic alignment changes and accelerated tire wear—SuperPro’s polyurethane solution provides a durable, high-performance upgrade.

• Manufactured from SuperPro's proprietary engineering-grade polyurethane formula
• Resistant to extreme temperatures, oils, water, and coolant for long-term reliability
• Engineered to provide a quieter, longer-lasting alternative to factory rubber components
• Designed, engineered, and manufactured in Australia
• Includes manufacturer's Lifetime Warranty
• MPN: SPF1990K

Fits 1990-2005 Mazda Miata models including Base, LS, Mazdaspeed, and M Edition.

SuperPro rear lower inner control arm bushings are designed to stabilize suspension movement and maintain precise alignment geometry under load. Unlike factory rubber bushings that deflect and degrade over time, these polyurethane upgrades eliminate dynamic changes in wheel alignment that compromise handling and accelerate tire wear. This kit is an essential upgrade for Miata owners looking to restore steering response and chassis predictability.

• Manufactured using SuperPro’s proprietary engineering-grade polyurethane formula
• Maintains suspension geometry without the harshness often associated with inferior poly materials
• Resistant to extreme temperatures, oils, water, and coolant
• Direct replacement for worn OE bushings in the rear lower inner position
• Designed, engineered, and manufactured in Australia
• Includes manufacturer's Lifetime Warranty
• Manufacturer Part Number: SPF1988K

Fits select 1990-2008 Subaru Forester, Impreza, Legacy, and Outback models.

Enhance steering precision and driver feedback by replacing soft, worn-out factory rubber bushings with the SuperPro steering rack and pinion mount bushing kit. Over time, original equipment bushings deteriorate, leading to excessive rack movement, steering slop, and a wandering feel on the road. This kit anchors the steering rack firmly to the chassis, minimizing deflection and reducing the need for constant mid-corner corrections for a more predictable drive.

• Reduces steering rack movement and deflection for more accurate tracking
• Improves steering feel and response by replacing compliant OE rubber
• Helps eliminate vehicle wandering and steering slop
• Engineered for consistent performance and durability
• Direct fit replacement for factory mounting points
• Manufacturer Part Number: SPF1972K

Fits select 1992-2000 Lexus GS300, SC300, SC400, and Toyota Supra.

Standard rubber bushings deflect under load, leading to dynamic alignment changes that compromise handling and accelerate tire wear. This SuperPro Rear Upper Inner Control Arm Bushing Set (SPF1922K) is engineered to stabilize control arm movement, maintaining precise suspension geometry under all driving conditions. Whether you are performing a standard repair or a performance upgrade, these polyurethane bushings offer a more durable, responsive alternative to factory components by reducing alignment drift and improving steering response.

• Manufactured from SuperPro's proprietary engineering-grade polyurethane formula
• Resistant to extreme temperatures, oils, water, and coolant
• Designed, engineered, and manufactured in Australia
• Direct replacement for worn OE rubber bushings
• Manufacturer Part Number: SPF1922K
• Lifetime Warranty

Fits select 1990-2008 Subaru Forester, Impreza, and Legacy, and 2005-2006 Saab 9-2X models.

SuperPro trailing arm bushings are engineered to stabilize the movement of the rear suspension arms, ensuring that critical wheel alignment geometry is maintained under various driving loads. The factory-installed rubber bushings often soften or perish over time, leading to dynamic changes in alignment that negatively impact handling precision and accelerate tire wear. This kit provides a durable repair and performance upgrade by replacing those worn components with high-grade polyurethane.

By installing the SuperPro SPF1907K kit, you restore the rear suspension's predictability and tire contact patch consistency. This is a direct-replacement solution for the lower rearward position on the trailing arm, designed for long-term service life in both daily driving and spirited environments.

• Replaces worn or soft OE rubber bushings to restore handling
• Maintains consistent suspension geometry and alignment
• Improves tire longevity by preventing unwanted toe and camber changes
• Includes high-quality polyurethane bushings and necessary hardware
• Manufacturer Part Number: SPF1907K

Fits 1996-2004 Toyota 4Runner and Tacoma.

The SuperPro Steering Rack & Pinion Bushing Kit (SPF1836K) is engineered to replace the soft, failure-prone factory rubber bushings that often lead to a vague or "loose" steering feel. By providing a more secure anchor for the steering rack, this kit eliminates unwanted lateral movement and deflection, resulting in more consistent wheel alignment and improved steering response.

This upgrade is particularly effective for vehicles with larger tires or those used in demanding off-road conditions where factory bushings tend to compress and wear prematurely. Properly anchoring the steering rack reduces wandering on the road and minimizes the constant small corrections needed to maintain your course, delivering a more predictable and controlled driving experience.

• Direct replacement for compliant factory rubber bushings
• Significantly reduces steering slop and rack deflection
• Improves steering feedback and directional stability
• Engineered for durability against oils, grime, and environmental wear
• Manufacturer Part Number: SPF1836K

Fits select 1992-2000 Lexus SC300, SC400, and Toyota Supra. This SuperPro polyurethane bushing kit replaces worn factory rubber components to eliminate excessive deflection and restore steering precision.

Control arm bushings serve as critical pivot points in your suspension. Over time, original equipment rubber softens and cracks, leading to sloppy handling, irregular tire wear, and slowed steering response. This impact is magnified on vehicles with larger wheel packages or upgraded brakes. SuperPro bushings are engineered from a proprietary polyurethane formula that maintains OEM-level noise, vibration, and harshness (NVH) isolation while providing the durability and performance needed for both daily commuting and track use.

Important Note for Toyota Supra MKIV: Toyota utilized two different front lower control arms during production. While this kit is typically suited for vehicles produced from July 1996 onward, arms are often swapped between model years. It is highly recommended to measure your existing arms to confirm fitment before ordering.

• Proprietary engineering-grade polyurethane formula for long-lasting performance
• Resistant to extreme temperatures, oils, water, and coolant
• Designed, engineered, and manufactured in Australia
• Includes necessary hardware for installation
• Manufacturer Part Number: SPF1651K
• Lifetime Warranty

Fits 1992-2000 Lexus SC300 and SC400, and 1993-1998 Toyota Supra (Base and Twin Turbo). This SuperPro SPF1650K polyurethane bushing kit replaces the soft factory front lower inner forward control arm bushings to eliminate unwanted suspension deflection and restore steering precision.

Important Fitment Note: MKIV Supra and Lexus SC models utilized two different front lower control arm designs during production. While this kit is typically specified for vehicles produced from July 1996 onward, these arms are frequently interchanged. To ensure you receive the correct kit, we recommend measuring your existing bushings or control arm housing before ordering to confirm compatibility.

SuperPro bushings are engineered from a proprietary polyurethane formula that offers a superior alternative to rubber. Unlike OEM bushings that degrade over time, these are resistant to extreme temperatures, oils, water, and coolant. The result is a more responsive chassis with reduced tire wear and improved handling without compromising cabin isolation or ride comfort.

• Direct replacement for worn OE front lower inner forward bushings
• Proprietary engineering-grade polyurethane for durability and quiet operation
• Maintains consistent alignment geometry under cornering and braking loads
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF1650K
• Lifetime Warranty

Fits Nissan Skyline R33 GT-R.

SuperPro front sway bar chassis mount bushings are engineered to replace soft or deteriorated factory rubber components that allow for excessive bar movement. By securing the sway bar more effectively to the vehicle chassis, these high-performance polyurethane bushings ensure the stabilizer bar functions as intended, restoring handling precision and reducing body roll during cornering.

• Manufactured from high-grade polyurethane for superior durability and resistance to environmental contaminants
• Eliminates unwanted sway bar deflection for more consistent suspension geometry
• Engineered to provide improved steering response without excessive NVH (noise, vibration, and harshness)
• Internal knurling designed to retain lubricant for long-term, quiet operation
• Direct fit replacement for the factory front sway bar mount bushings
• Bore Size: 22mm
• Manufacturer Part Number: SPF1647-22K

Fits select 1989-1998 Nissan 240SX and 1990-1996 Nissan 300ZX (Base, LE, SE, XE, 2+2, and Turbo).

SuperPro polyurethane bushings are engineered to stabilize rear control arm movement, ensuring suspension geometry is maintained under heavy cornering and braking loads. Unlike factory rubber bushings that allow for excessive deflection—leading to dynamic alignment changes and accelerated tire wear—this SPF1639K kit provides a more rigid, responsive connection between the control arm and the chassis without the harshness often associated with inferior materials.

Manufactured in Australia, these bushings are produced using a proprietary engineering-grade polyurethane formula that remains resilient against oils, water, coolant, and extreme temperature fluctuations. This kit serves as a high-performance repair or upgrade solution, restoring handling precision and steering feedback.

• Proprietary polyurethane formula for durability and vibration dampening
• Resistant to chemicals, oils, and environmental factors
• Maintains consistent wheel alignment and maximizes tire life
• Direct replacement for worn factory rubber bushings
• Manufacturer Part Number: SPF1639K
• Designed and manufactured in Australia
• Limited Lifetime Warranty