Fits select 1993-2015 Acura, Honda, Mitsubishi, Subaru, and Toyota models including RSX, Accord, Civic, Lancer Evolution, Impreza, Legacy, and Supra.

The SuperPro TRC1035 Heavy Duty Adjustable End Link Set is engineered to eliminate sway bar link flex and restore neutral positioning on vehicles with altered ride heights. Whether you have lowered your car on coilovers or raised it, these links allow you to fine-tune the sway bar geometry to prevent preload and maximize the efficiency of both factory and aftermarket adjustable sway bars. Constructed from high-strength 6060-T5 alloy, these links provide a rigid connection that improves chassis response compared to worn or flexible OE components.

• Adjustable Length: 65mm - 70mm (2.6" - 2.8") center-to-center
• Stud Diameter: 10mm ball joint studs
• Material: 6060-T5 high-grade aluminum alloy
• Ball Joint: Low friction design for smooth articulation and long service life
• On-Car Adjustment: Integrated spanner provision allows for easy length changes while installed
• Includes: Pair of links (left and right) with mounting hardware
• Manufacturer Part Number: TRC1035

Note: End link length requirements may change depending on ride height or if aftermarket coilovers have relocated mounting tabs. Always measure your required length to ensure the 65mm-70mm range is appropriate for your specific suspension configuration.

Fits select 2000-2025 Subaru Forester, Impreza, Legacy, Outback, and WRX models.

The SuperPro SPF4297K Rear Differential-to-Subframe Mount Bushing Insert Kit is engineered to reduce excessive drivetrain movement. These inserts fill the voids in the original factory rubber bushings, sharpening throttle response and improving power delivery without the noise, vibration, and harshness (NVH) often associated with full solid mount replacements.

Manufactured in Australia from SuperPro’s proprietary engineering-grade polyurethane, these inserts maintain their physical properties even when exposed to extreme temperatures, oils, and road contaminants. This kit is a direct-fit solution designed to maintain steering geometry, correct alignment, and extend the service life of your drivetrain components.

• Reduces differential movement for improved handling and power transfer
• Engineered from proprietary polyurethane for durability and quiet operation
• Resistant to extreme temperatures, oils, water, and coolant
• Includes a manufacturer lifetime warranty
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF4297K

Fits 2004-2015 Mazda MX-5 Miata and Mazda RX-8.

The SuperPro SPF3404-70K Street Performance Rear Differential Center Support Bushing Kit is engineered to eliminate the excessive deflection found in factory rubber mounts. By securing the differential housing, this kit reduces movement during rapid load changes—specifically when rolling on and off the throttle. This results in sharper throttle response and more direct control over the vehicle's cornering attitude, as the drivetrain reacts more quickly to driver inputs.

Built for durability and performance, these bushings offer a vastly extended service life compared to the soft OEM components. This kit is ideal for drivers seeking improved drivetrain rigidity without the extreme harshness of full motorsport bushings.

• Reduces differential housing deflection under changing loads
• Enhances throttle response and mid-corner adjustability
• Vastly extended service life over soft factory rubber components
• Replaces rear differential center support bushings
• Manufacturer Part Number: SPF3404-70K
• Includes: Full rear differential mount bushing kit
• Warranty: Manufacturer Lifetime Warranty

Fits select 2008-2025 Subaru (WRX, STI, BRZ, Forester, Impreza), 2017-2026 Toyota (86, GR86), and 2013-2016 Scion FR-S.

Control arm and trailing arm bushings serve as the critical pivot points for your vehicle's suspension. Over time, original equipment rubber bushings become soft and worn, leading to significant deflection. This movement results in slower steering response, a "sloppy" feel through corners, and irregular tire wear. The SuperPro SPF3098K Rear Trailing Arm Rearward Bushing Kit is engineered to eliminate this unwanted movement, providing a more stable and predictable chassis.

Constructed from proprietary polyurethane, these bushings offer the durability required for harsh road conditions and track use without the excessive noise, vibration, and harshness (NVH) often associated with performance bushings. Whether you are running grippier tires, upgraded brakes, or heavier wheels, these bushings ensure your alignment remains consistent under load.

• Replaces soft, worn factory rubber bushings to restore suspension geometry
• Engineered for durability in harsh environments and high-performance driving
• Maintains OEM levels of noise and harshness isolation
• Improves steering response and reduces tire wear caused by excessive deflection
• Includes high-quality polyurethane bushings and necessary hardware for the rearward trailing arm position

• Manufacturer Part Number: SPF3098K
• Material: Proprietary Polyurethane
• Location: Rear Trailing Arm (Rearward Position)

Fits 1969-1991 Alfa Romeo Spider models including Base, Graduate, Quadrifoglio, and Veloce.

The SuperPro SPF2653K Front Transmission Mount Supplement Washer Kit is an essential upgrade for stabilizing the drivetrain and improving the responsiveness of your classic Alfa Romeo. These supplement washers are engineered to work with the factory mounting points, providing a more secure interface than standard rubber components. Manufactured from SuperPro's proprietary engineering-grade polyurethane, this kit is designed to withstand extreme temperatures and remains unaffected by exposure to oils, water, or coolant.

• Proprietary polyurethane formula offers superior durability and quieter operation than traditional rubber
• Reduces unwanted movement for enhanced handling and performance
• Engineered to maintain steering and drivetrain geometry
• Designed and manufactured in Australia with over 40 years of specialized suspension experience
• Resistant to environmental contaminants including oils and road chemicals
• Includes a Lifetime Warranty
• Manufacturer Part Number: SPF2653K

Fits 1967-1974 Holden Torana.

The SuperPro SPF1925K Front Lower Control Arm Inner Bushing Kit is a precision-engineered solution for restoring suspension geometry and steering response. Factory rubber bushings are prone to deflection and degradation over time, leading to dynamic wheel alignment changes that accelerate tire wear and compromise handling. These polyurethane replacements stabilize the inner pivot point of the lower control arms, ensuring the arm moves through its intended arc without unwanted lateral or longitudinal deflection.

Designed and tested in Australia to withstand harsh road conditions, this kit eliminates common suspension clunks and vibrations. By maintaining a consistent contact patch, these bushings improve cornering grip and provide more predictable feedback through the steering wheel. This kit is a direct-fit upgrade for enthusiasts looking to refresh a classic chassis with modern material technology.

• Maintains accurate wheel alignment for extended tire life and improved grip
• Replaces soft or perished OE rubber bushings at the inner control arm pivot
• Resistant to oils, road chemicals, and extreme temperatures
• Restores factory-fresh suspension feel and eliminates steering vagueness
• Manufacturer Part Number: SPF1925K
• Backed by SuperPro's Limited Lifetime Warranty

Fits select 1960-1993 Chevrolet Corvette and Impala, Ford Mustang and Falcon, Mazda B-Series and RX-7, Toyota Corolla and Cressida, and Daihatsu Rocky.

The SuperPro SPF1450-22K sway bar mount bushing set is engineered to restore precision to your front suspension system. Over time, factory rubber bushings degrade, leading to excessive deflection, body roll, and a vague steering feel. These 22mm bushings provide a high-performance alternative, anchoring the sway bar to ensure it functions at its intended rate for flatter cornering and improved chassis response.

Designed to integrate seamlessly with factory mounting hardware, these bushings eliminate the need for universal-fit components. Each bushing features advanced grease retention technology, ensuring a lifetime of silent, maintenance-free operation while preventing the squeaking often associated with inferior aftermarket upgrades.

• Bore Diameter: 22mm
• Direct replacement for OE rubber bushings in factory mountings
• Advanced grease retention grooves for smooth, silent operation
• Improves steering feedback and lateral stability
• Includes necessary bushings for a complete front mount replacement
• Manufacturer Part Number: SPF1450-22K

Fits 1986-1992 Toyota Supra Base and Turbo models.

SuperPro front lower inner control arm bushings are engineered to stabilize arm movement and maintain precise suspension geometry under load. Factory rubber bushings are prone to deflection and degradation over time, leading to dynamic alignment changes that compromise handling and accelerate tire wear. This SPF1443K kit provides a high-performance replacement that restores steering response and chassis stability.

Constructed from SuperPro's proprietary engineering-grade polyurethane, these bushings offer a superior alternative to standard rubber. The material is specifically formulated to remain unaffected by extreme temperatures, engine oils, water, or coolant, ensuring consistent performance in harsh environments. Designed and manufactured in Australia, this kit is an essential upgrade for maintaining the handling characteristics of the A70 chassis.

• Replaces worn OE bushings to maintain correct wheel alignment
• Made from proprietary engineering-grade polyurethane formula
• High resistance to oils, chemicals, and environmental contaminants
• Designed, engineered, and manufactured in Australia
• Includes manufacturer's Lifetime Warranty
• Manufacturer Part Number: SPF1443K

The SuperPro SPF1429K Front Strut Bar to Chassis Mount Bushing Kit is a premium suspension upgrade designed to replace soft, worn factory rubber components with proprietary synthetic elastomer. By securing the strut bar to the chassis with high-grade polyurethane, this kit maintains consistent suspension geometry and eliminates the clunks and unwanted movement often found in high-mileage vehicles.

Engineered and manufactured in Australia, these bushings are resistant to extreme temperatures, oils, and coolants, ensuring they outlast and outperform OEM alternatives. The SPF1429K kit provides a more precise steering feel and improved alignment stability without compromising ride quality or introducing excessive noise.

• Part Number: SPF1429K
• Material: Proprietary engineering-grade polyurethane formula
• Fitment: Front Strut Bar to Chassis Mount
• Resistant to oils, water, and environmental contaminants
• Engineered to restore factory-fresh handling and steering response
• Designed, tested, and manufactured in Australia
• Includes SuperPro Limited Lifetime Warranty

Fits select 1984-2018 Jeep Cherokee and Wrangler (including JK/JKU) models equipped with a 25mm rear sway bar. These bushings are engineered to replace soft, worn factory rubber that often leads to body roll and a vague steering feel.

SuperPro sway bar mount bushings provide a precise fit for your vehicle's factory mounting brackets and hardware. Unlike generic universal bushings, these are specifically molded to integrate with the OE suspension design, ensuring proper alignment and bar rotation. Each bushing features advanced grease retention technology, utilizing internal grooves to keep lubricant where it is needed most for silent, maintenance-free operation over the life of the vehicle.

• Manufacturer Part Number: SPF1138-25K
• Bushing Diameter: 25mm
• Position: Rear
• Material: High-grade proprietary polyurethane
• Direct replacement for OE rubber bushings
• Engineered for improved body control and handling response

Fits 1970-1973 Triumph Stag Base.

The SuperPro SPF0137-90K Lower Control Arm Inner Bushing is a high-performance replacement for the factory rubber components that often soften and perish over time. Designed specifically for the front suspension of the Triumph Stag, this bushing restores steering precision and maintains proper wheel alignment by reducing excessive control arm movement during cornering and braking.

• Replaces worn OE rubber bushings to eliminate play in the front suspension
• Engineered from proprietary polyurethane for increased durability and chemical resistance
• Maintains consistent suspension geometry under high-load driving conditions
• Direct-fit design for the inner lower control arm mounting point
• Manufacturer Part Number: SPF0137-90K

Fits select 2004-2013 Mazda 3 models, including i, S, Mazdaspeed, and SP23.

The SuperPro KIT172K Rear Suspension Enhancement Bushing Kit is engineered to replace soft or deteriorated factory rubber bushings, providing a significant upgrade in handling and vehicle stability. These bushings are designed to maintain consistent suspension geometry under load, reducing unwanted movement and improving driver feedback without the harshness often associated with performance upgrades. This kit is a direct solution for restoring steering precision and ensuring long-lasting suspension performance.

• Direct replacement for worn OE rear suspension bushings
• Improves chassis stability and handling characteristics
• Engineered materials designed for durability and resistance to environmental degradation
• Maintains consistent alignment settings for improved tire life
• Manufacturer Part Number: KIT172K
• Position: Rear

Fits select 2005-2021 Nissan Frontier, 2005-2015 Nissan Xterra, and 2009-2012 Suzuki Equator.

The SuperPro Rear Leaf Spring and Shackle Bushing Kit (KIT141K) is designed to restore stability and handling precision to your vehicle's rear suspension. Leaf spring bushings are critical for controlling the movement of the rear axle; when factory bushings become worn, soft, or damaged, they allow the solid rear axle to shift independently of the chassis. This movement often manifests as a "wandering" sensation on the road or "passive steer" from the rear end, which becomes significantly more dangerous when the vehicle is under heavy braking or carrying heavy loads such as trailers, boats, or RVs.

By upgrading to this SuperPro kit, you eliminate excessive axle play and ensure the suspension maintains its intended geometry. This kit is a vital upgrade for any 4WD seeing heavy use or towing duties, providing a more predictable and stable driving experience.

• Eliminates rear end wandering and passive steer
• Improves vehicle stability during heavy braking and towing
• Stabilizes the rear axle by replacing worn or inferior factory bushings
• Includes bushings for both the rear leaf springs and shackles
• Manufacturer Part Number: KIT141K

Fits select 1999-2005 Mazda Miata models, including Base, LS, SE, Shinsen, 10th Anniversary, and Mazdaspeed.

The SuperPro KIT132NBK is a comprehensive alignment-adjustable suspension bushing kit engineered specifically for the NB-generation Miata. This kit replaces compliant, worn-out factory rubber with high-performance polyurethane bushings designed to enhance steering response and chassis feedback. Unlike standard replacement kits, the KIT132NBK utilizes a strategic combination of standard and double-offset bushings, allowing for precise adjustment of front camber and caster, as well as rear camber.

By upgrading to this kit, you gain the ability to dial in an aggressive alignment for the track or correct geometry on lowered street cars. These bushings are designed for a significantly longer service life than OE components while maintaining superior control over suspension geometry under load.

• Manufacturer Part Number: KIT132NBK
• Front Control Arm Lower-Inner Front Bush Kit (Double Offset)
• Front Control Arm Lower-Inner Rear Bush Kit (Double Offset)
• Front Control Arm Upper-Inner Bush Kit
• Rear Control Arm Lower-Inner Bush Kit (Double Offset)
• Rear Control Arm Lower-Outer Bush Kit
• Rear Control Arm Upper-Inner and Outer Bush Kit

Fits 2007-2024 Lexus GX460, Toyota 4Runner, and Toyota FJ Cruiser.

Restore steering precision and eliminate excessive rack movement with the SuperPro Steering Rack and Pinion Mount Bushing Kit. Factory rubber bushings are prone to softening and perishing over time, leading to steering wander, vague on-center feel, and inconsistent alignment. This kit replaces those high-deflection components with SuperPro's proprietary engineering-grade polyurethane to provide a stable, long-lasting mounting point for the steering rack.

Engineered and manufactured in Australia, these bushings (SPF4056K) are specifically formulated to resist degradation from engine oils, coolant, and extreme temperatures. Unlike standard rubber, this polyurethane material maintains its shape under high loads, ensuring your vehicle maintains proper steering geometry whether on the highway or navigating technical off-road terrain.

• Proprietary polyurethane formula provides a superior alternative to rubber for increased service life
• Restores steering response and maintains consistent wheel alignment
• Unaffected by extreme temperatures, oils, water, or coolant
• Designed, engineered, and manufactured in Australia
• Direct replacement for factory steering rack bushings
• Manufacturer Part Number: SPF4056K
• Lifetime Warranty

Fits 1998-2005 Lexus GS300, GS400, and GS430 Base models.

Improve cornering stability and eliminate excessive body roll with the SuperPro Roll Control rear sway bar kit. This 18mm bar is engineered as a direct replacement for the factory unit, offering a significant upgrade in handling balance without compromising ride quality. The three-position adjustment allows you to increase the sway bar rate by 30-50% over the original equipment simply by moving the end link mounting positions.

Each SuperPro sway bar is precisely formed for a factory-perfect fit and features a high-durability four-step finish. This process includes a zinc treatment, epoxy coating, and a two-stage powder coat to provide maximum corrosion resistance even in harsh environments.

• Part Number: RC0056RZ-18
• Diameter: 18mm heavy-duty steel construction
• Adjustment: 3-way adjustable mounting points for fine-tuning handling
• Finish: Four-step anti-corrosion zinc and powder coat
• Benefit: Reduces body roll and improves mechanical grip during cornering
• Fitment: Bolt-on installation using common hand tools

Fits select 1993-2008 Subaru Impreza, Legacy, Forester, and Saab 9-2X models.

Suspension subframes are the critical interface between your vehicle's chassis and its suspension components. From the factory, these mounts typically utilize soft, heavily-voided rubber bushings designed to prioritize passenger isolation over performance. Over time, this rubber ages and degrades, leading to excessive subframe movement that compromises traction, alignment stability, and overall handling precision.

The SuperPro SPF4350K Rear Subframe To Body Mount Bushing Kit replaces these worn or soft OE components with high-performance bushings. By stabilizing the rear subframe, this kit reduces unwanted movement during gear changes and aggressive cornering, effectively eliminating wheel hop under acceleration and restoring predictable control to your drivetrain and suspension system.

• Replaces factory rear subframe-to-body mounts
• Reduces subframe movement for improved traction and power delivery
• Helps eliminate wheel hop and drivetrain slop
• Engineered for long-term durability and performance
• Manufacturer Part Number: SPF4350K

Fits 2000-2005 Toyota Echo and MR2 Spyder, and 2004-2006 Scion xA and xB.

The SuperPro SPF2782K Front Lower Inner Rearward Control Arm Bushing Kit replaces soft or worn factory rubber bushings to eliminate unwanted suspension deflection. By securing the critical pivot point between core suspension components, these bushings restore steering precision and prevent the "sloppy" feel caused by aged rubber. Whether you are managing the increased loads of upgraded wheels and tires or simply refreshing your daily driver, these polyurethane bushings provide a more stable alignment and consistent handling without sacrificing cabin comfort.

• Proprietary engineering-grade polyurethane formula for superior durability and performance
• Resistant to extreme temperatures, oils, water, and engine coolants
• Engineered to maintain OEM-level noise, vibration, and harshness (NVH) isolation
• Direct replacement for the front lower inner rearward control arm position
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF2782K
• Lifetime Warranty

Fits select 2024-2026 Toyota Tacoma, Land Cruiser, 4Runner, and Lexus GX550.

SuperPro Fixed Offset Upper Control Arms (TRC6715) are engineered to solve the alignment challenges inherent in vehicles with 2-inch to 3-inch suspension lifts. By integrating optimized camber and caster corrections directly into the arm's geometry, these UCAs eliminate the need for time-consuming manual adjustments or trial-and-error setups while restoring factory-level drivability and steering precision.

Designed as a direct bolt-on solution for late-model Toyota and Lexus platforms, these arms enhance straight-line stability and provide more predictable cornering behavior. Each arm is equipped with a heavy-duty, high-articulation ball joint to ensure maximum durability and suspension travel during technical off-road maneuvers without sacrificing on-road comfort.

• Manufacturer Part Number: TRC6715
• Corrects camber and caster for 2"-3" suspension lifts
• Fixed offset design eliminates alignment guesswork
• Includes heavy-duty, high-articulation ball joints
• Direct bolt-on installation to factory mounting points
• Improves steering feel, accuracy, and turn-in performance

Fits 2023-2026 Toyota GR Corolla Core, Circuit Edition, Premium, and Morizo Edition models.

The SuperPro SPF5801K torque mount bushing kit is an essential upgrade for owners looking to eliminate the excessive powertrain movement inherent in the factory mounting system. While the original equipment (OE) rubber mounts are designed for maximum isolation, their soft, voided construction allows for significant engine pitch during aggressive acceleration, engine braking, and gear changes. These inserts fill the open voids in the factory bushings to provide a more connected and responsive driving experience.

• Improved Power Delivery: Reduces engine and drivetrain movement under load for more immediate throttle response and cleaner manual shifts.
• Dual-Purpose Design: Offers a performance-oriented feel during aggressive driving while maintaining the civility and low noise, vibration, and harshness (NVH) of the factory mounts during normal cruising.
• Extended Bushing Life: By limiting the total range of movement, these inserts reduce the strain on the factory rubber, helping to prevent premature wear.
• Direct Fitment: Engineered as a supplement to the OEM mount, requiring no permanent modifications to the vehicle.

The kit includes a set of high-performance polyurethane inserts (Manufacturer Part Number: SPF5801K) specifically designed for the GR Corolla chassis.

Fits select 2016-2025 Mazda MX-5 Miata and 2017-2020 Fiat 124 Spider.

The SuperPro SPF5538K Heim Joint Kit provides a high-performance alternative to standard rubber bushings by replacing the factory heim-style joints on the rear suspension. Specifically designed for the ND chassis and its Fiat counterpart, this kit replaces the joints mounting the rear link rod (OE N243-28-45X) and link arm (OE NA2E-28-61X) to the rear hub and knuckle (N243-26-11XB & N243-26-12XB). Using proprietary engineering-grade polyurethane, these bushings offer superior durability and more precise suspension geometry than OE components.

• Direct replacement for rear link rod and link arm heim joints.
• Manufactured from SuperPro's proprietary polyurethane for long-lasting performance.
• Resistant to extreme temperatures, oils, water, and engine coolant.
• Engineered and manufactured in Australia for improved handling precision.
• Includes Lifetime Warranty.
• Manufacturer Part Number: SPF5538K

Fits 2005-2012 Nissan Pathfinder (LE, S, SE, SE Off-Road, Silver Edition, SV, and XE).

The SuperPro SPF5133K rear differential-to-subframe mount bushing set is engineered to solve the excessive driveline slop common in factory rubber mounts. As OEM bushings soften or degrade over time, the differential moves under load, leading to vague throttle response and intrusive shifts. These upgraded bushings provide a more rigid connection to the subframe, significantly reducing differential twist during acceleration and deceleration.

Installing this set results in increased chassis responsiveness and more predictable performance under changing loads. By stabilizing the differential, you ensure power is transferred to the ground more efficiently without the unwanted movement associated with worn factory components.

• Manufacturer Part Number: SPF5133K
• Placement: Rear Differential-to-Subframe
• Performance: Reduces driveline movement and improves shift feel
• Construction: High-durability upgraded material replaces soft OEM rubber

Vehicle Fitment

Fits select 2008-2025 Subaru (Impreza, WRX, Forester, BRZ, Legacy, XV Crosstrek), Toyota (86, GR86), and Scion (FR-S).

The SuperPro SPF3915K Rear Heavy Duty High Articulation End Link Set is engineered to eliminate the common failure points and geometry limitations of factory sway bar links. Designed specifically for vehicles with modified ride heights or those requiring increased suspension travel, these high-articulation links ensure your sway bar remains in its optimal operating window, preventing binding and improving cornering response.

Each link features SuperPro's proprietary engineering-grade polyurethane bushings. Unlike standard rubber that deflects under load and degrades over time, these bushings maintain precise alignment and offer a significant increase in service life without the harshness often associated with inferior polyurethane. This kit provides a more direct connection between the suspension and the sway bar, resulting in flatter cornering and more predictable handling.

• High-articulation design maintains correct sway bar geometry on lowered or long-travel setups
• Heavy-duty construction resists bending and fatigue under aggressive driving conditions
• Proprietary polyurethane bushings are resistant to oils, coolants, and extreme temperatures
• Designed, engineered, and manufactured in Australia
• Direct replacement for OE rear end links
• Manufacturer Part Number: SPF3915K

Fits 2007-2026 Jeep Wrangler, Wrangler JK, and Gladiator (all trims including Rubicon, Sahara, and Sport).

The SuperPro SPF3751K bushing kit is engineered to replace the high-deflection factory rubber bushings at the front upper forward (axle-side) control arm pivot. For Jeep owners running larger tires or off-road suspension, these polyurethane bushings provide the structural stability needed to maintain alignment and steering precision without the harshness typically associated with aftermarket bushings. SuperPro’s proprietary engineering-grade material is formulated to absorb NVH (noise, vibration, and harshness) while resisting the environmental stressors that cause rubber to tear and fail.

• Replaces soft OE rubber with high-performance polyurethane for sharper steering response
• Material is unaffected by extreme temperatures, engine oils, coolant, or water
• Specifically designed for the axle-end mounting point of the front upper control arms
• Maintains factory ride quality and comfort levels on and off the trail
• Manufactured in Australia to withstand harsh terrain
• Manufacturer Part Number: SPF3751K
• Lifetime Warranty

Fits select 2008-2018 Subaru Impreza, WRX, Forester, and BRZ, 2013-2016 Scion FR-S, and 2017-2018 Toyota 86.

The SuperPro Rear Lower Control Arm Outer Bushing Kit (SPF3104K) is engineered to replace soft or worn factory rubber bushings that allow for excessive movement. By stabilizing the control arm, these polyurethane bushings maintain consistent suspension geometry under load, preventing the dynamic alignment changes that lead to unpredictable handling and premature tire wear. This kit is a superior alternative to standard rubber, offering higher durability and precision without sacrificing ride quality.

• Manufactured from SuperPro's proprietary engineering-grade polyurethane formula
• Provides a quieter, longer-lasting alternative to standard rubber components
• Unaffected by extreme temperatures, oils, water, or engine coolant
• Designed, engineered, and manufactured in Australia
• Maintains precise wheel alignment for improved handling and tire longevity
• Includes Lifetime Warranty
• Manufacturer Part Number: SPF3104K

Fits select 1998-2005 Lexus GS300, GS400, and IS300 models.

The SuperPro SPF2784K Rear Trailing Arm Forward Bushing Kit is engineered to stabilize rear suspension movement and maintain precise wheel alignment under load. Factory rubber bushings are prone to excessive deflection and degradation over time, leading to dynamic changes in geometry that negatively impact handling predictability and accelerate tire wear. This polyurethane upgrade provides a more stable pivot point for the trailing arm, ensuring consistent contact patches and sharper chassis response.

By minimizing unwanted trailing arm movement, the SPF2784K kit helps preserve your Lexus's handling characteristics and protects your investment in performance tires. These bushings are a durable alternative to OE components, designed to withstand environmental contaminants and mechanical stress better than traditional rubber.

• Direct replacement for worn factory trailing arm forward bushings
• Maintains consistent wheel alignment and suspension geometry
• High-grade polyurethane construction for superior durability and oil resistance
• Reduces dynamic toe and camber changes during cornering or braking
• Manufacturer Part Number: SPF2784K

Vehicle Fitment:

• 1998-2000 Lexus GS300 Base
• 1998-2000 Lexus GS400 Base
• 2001-2005 Lexus IS300 Base
• 2002-2005 Lexus IS300 Sportcross

Fits select 2004-2022 Ford F-150, Ford Expedition, Lincoln Navigator, and Lincoln Mark LT.

The SuperPro TRC6670 Fixed Offset Upper Control Arm set is a comprehensive alignment solution for vehicles equipped with suspension lifts between 50mm (2") and 100mm (4"). When lifting these platforms, factory suspension geometry often suffers from restricted caster and undesirable camber settings. These arms are engineered to restore handling precision by providing a fixed increase of 1.0 degree of caster and up to 0.5 degrees of negative camber (based on a 75mm lift).

Constructed for durability and articulation, these arms feature heavy-duty ball joints and proprietary SuperPro bushings. The design specifically increases clearance between the arm and the coilover strut at full droop, preventing contact and allowing for greater suspension travel and articulation during off-road use.

• Manufacturer Part Number: TRC6670
• Fixed offset design for alignment correction on lifted applications
• Optimized for 50mm (2") to 100mm (4") lift heights
• Built-in caster (+1.0°) and camber (+0.5°) correction
• Increased clearance for coilover spring assemblies
• Equipped with high-articulation heavy-duty ball joints
• Pre-installed SuperPro polyurethane bushings for reduced deflection
• Includes all necessary hardware for installation

Fits select 2007-2024 Toyota 4Runner, FJ Cruiser, and Lexus GX460.

The SuperPro TRC499 HD Adjustable Rear Panhard Rod (track bar) is a critical upgrade for vehicles with increased ride height. After a suspension lift, the fixed-length factory track bar pulls the rear axle out of alignment; this heavy-duty adjustable replacement allows you to precisely re-center the axle, restoring proper suspension geometry and tracking. It is an essential component for maintaining alignment accuracy and predictable handling on lifted rigs.

Construction features include SuperPro’s proprietary high-articulation bushings, which offer significantly better durability and range of motion than factory rubber. These bushings are engineered to survive harsh off-road environments while maintaining excellent NVH (Noise, Vibration, and Harshness) isolation, ensuring your vehicle remains comfortable during highway transit.

• Manufacturer Part Number: TRC499
• Fully adjustable design for precise rear axle centering
• Restores suspension geometry and alignment after a lift
• Includes lifetime high-articulation bushings for maximum durability
• Maintains factory cabin comfort with superior NVH isolation
• Direct replacement for OE rear panhard rod mounting points

Fits select 2010-2024 Toyota 4Runner and 2010-2023 Lexus GX460 models equipped with Kinetic Dynamic Suspension System (KDSS).

SuperPro Front Lower Control Arms are engineered to solve the common alignment issues that occur when a 4WD vehicle is lifted. By altering the vehicle's geometry, factory control arms often reach their limits, preventing a proper alignment and reducing articulation. This camber-adjustable set provides the necessary range of movement to correct wheel alignment and improve handling, while providing extra clearance for off-road use.

Manufactured in Australia from high-grade Australian steel, these arms are built to withstand harsh trail conditions and outperform OE components. The form-factor welding and assembly ensure maximum durability for heavy-duty applications.

• Product Line: SuperPro 4x4 Control Arms
• MPN: TRC493
• Fitment: Front Lower (Left and Right)
• Material: High-grade Australian Steel
• Adjustment: Camber Adjustable
• Compliance: Nationally Approved - VSB 14 Compliant (ADR compliant)
• Warranty: 3-Year Warranty
• Compatibility: Fits models equipped with KDSS ONLY

Fits 2014-2017 Chevrolet SS Base models.

The SuperPro TRC4305 Heavy Duty Adjustable Rear Sway Bar End Link Set is designed to replace worn, bent, or overly compliant factory links that compromise handling. These links feature an uprated center body and heavy-duty joints specifically engineered to outperform original equipment. By providing a rigid, adjustable connection between the sway bar and the suspension, this set allows for the elimination of sway bar preload and ensures more precise cornering and improved vehicle stability.

• Direct replacement or upgrade for OEM rear sway bar links (Part Number: TRC4305)
• Heavy-duty joints designed for performance and off-road durability
• Adjustable center body to optimize sway bar geometry
• Uprated materials resist bending or snapping under high-load driving
• Engineered, tested, and assembled in Brisbane, Australia