Fits 2007-2018 Jeep Wrangler JK and JKU (2-door and 4-door) models.

The Synergy Manufacturing Front Track Bar & Sector Shaft Brace is engineered to eliminate the common steering and suspension issues found in JK-platform Jeeps, especially those equipped with oversized tires. This heavy-duty kit reinforces the factory frame-side track bar bracket—a frequent failure point under high stress—while simultaneously providing a secondary support bearing for the steering box sector shaft. By tying the two together, this brace prevents the frame flex and sector shaft deflection that often leads to "death wobble" or steering gear failure.

• Distributes track bar loads across the frame to prevent bracket fatigue and cracking
• Includes a secondary bearing to support the steering gear sector shaft against lateral loads
• Laser-cut and CNC-bent from high-strength steel for precise fitment and durability
• Durable powder-coated finish for maximum corrosion resistance
• 100% bolt-on design for a straightforward installation without welding

Fits select 2003-2013 Dodge Ram 1500, 2500, and 3500.

The Synergy Heavy Duty Drag Link is a direct-fit replacement for the factory steering linkage on third and early fourth-generation Ram trucks. Engineered to solve the common issues associated with stock steering components, this drag link provides the rigidity and durability needed for heavy-duty use, especially on vehicles with oversized tires or suspension modifications. It allows for precise adjustment to center your steering wheel and helps maintain proper geometry for a more controlled driving experience.

• Heavy-duty construction designed for increased strength over the original equipment
• Fully adjustable design for centering the steering wheel and correcting geometry
• Direct bolt-on installation to factory mounting locations
• Engineered to handle the high-stress loads of off-road environments and larger wheel/tire setups

Fits 1994-1999 Dodge Ram 1500, 2500, and 3500 4x4 models.

The Synergy Manufacturing Heavy Duty Steering Tie Rod is engineered to replace the prone-to-flex factory steering components on second-generation Dodge Ram 4WD pickups. This heavy-duty upgrade significantly improves steering feel and response by providing a much more rigid connection between the knuckles, making it an essential component for trucks running oversized tires or those used in harsh off-road environments.

Constructed for maximum durability, this tie rod is designed to withstand the increased loads and stresses of heavy-duty use and larger tire diameters. The design allows for easy adjustment while installed on the vehicle, simplifying the alignment process after installation or suspension height changes. It serves as a direct bolt-on solution to restore steering precision and eliminate the instability often found in aging OE components.

• Direct bolt-on replacement for the factory tie rod assembly
• Significantly increases steering rigidity and reduces deflection
• Durable construction tailored for heavy-duty 1500, 2500, and 3500 4WD applications
• Compatible with both stock and lifted suspension heights
• Engineered to improve durability on trucks with larger wheel and tire packages

The Synergy Dual Steering Stabilizer Bracket is engineered to provide a secure, high-clearance mounting solution for dual steering stabilizers on 2003-2013 Dodge Ram trucks. Designed to address front-end feedback and shimmy, this bracket allows for the installation of two stabilizers to dampen steering vibrations and improve overall handling, particularly on trucks equipped with oversized tires or heavy-duty suspension setups.

• Fits 2003-2013 Dodge Ram models
• Provides secure mounting for dual steering stabilizer configurations
• Heavy-duty construction for increased durability in off-road conditions
• Dampens steering feedback and reduces front-end vibration
• Designed for precise fitment to factory or compatible aftermarket axle locations

Mount your steering stabilizer securely with the Synergy Steering Stabilizer Tie Rod Clamp. Specifically engineered to fit 2-inch OD (Outer Diameter) tie rods, this clamp provides a robust mounting point for your stabilizer, ensuring consistent steering feel and reduced vibration on technical terrain. It is a critical component for high-clearance steering setups where moving the stabilizer mounting point is necessary to avoid contact with other suspension components.

• Fits aftermarket tie rods with a 2-inch outer diameter (OD)
• Provides a stable, non-slip mounting point for the steering stabilizer
• Engineered for heavy-duty off-road use and extreme articulation
• Precision-machined for exact tolerances on 2" tubing

Fits 2005-2024 Ford F-450 and F-550 Super Duty models.

The Synergy Dual Steering Stabilizer Bracket is engineered to enhance front-end stability and steering control on heavy-duty Ford chassis. This bracket provides a robust mounting solution for dual steering stabilizers, effectively dampening road feedback and reducing the steering shimmy or bump steer often exacerbated by oversized tires and heavy payloads. Designed for a secure fit, it works to provide a more centered, controlled feel during both highway cruising and demanding work cycles.

• Heavy-duty steel construction for maximum rigidity and component life
• Precision laser-cut and CNC-bent to ensure an exact fit on the factory axle
• Bolt-on installation using existing mounting locations
• Durable black powder-coated finish for superior corrosion resistance
• Designed specifically for dual stabilizer cylinder configurations

Fits select 2014-2024 Ram 2500 and 3500 4WD trucks.

This Synergy steering stabilizer tie rod clamp provides a secure, heavy-duty mounting point for your steering dampener. It is specifically engineered to fit tie rods with a 1.625-inch (1-5/8") outer diameter, making it an essential component for owners upgrading their steering linkage or relocating their stabilizer for better clearance and protection. The robust design ensures your stabilizer remains firmly indexed even under the high stress of off-road use or with oversized tires.

• Specifically designed for 1.625-inch (1-5/8") OD tie rods
• Features 1-3/4 inch mounting width for stabilizer compatibility
• Engineered for 2014+ Ram heavy-duty steering geometries
• Heavy-duty construction prevents clamp slip or rotation during cycling
• Provides a clean, bolt-on solution for aftermarket steering setups

Fits 2005-2021 Ford Super Duty models.

This Synergy Manufacturing heavy-duty tie rod end is designed to replace worn components on the Pitman arm side of your steering linkage. Built to handle the increased loads and stresses of leveled or lifted trucks, this tie rod end helps restore steering precision and eliminate play in the drag link. The 1-14 LH (Left Hand) thread pitch ensures a direct fit for specific Synergy steering kits, providing a robust solution for high-clearance steering geometries.

• Position: Pitman Arm Side (Drag Link/Tie Rod)
• Thread Pitch: 1-14 LH
• Compatibility: 2005-2021 Ford Super Duty F-250/F-350
• Construction: Heavy-duty metal-on-metal design for durability

Maintain your Jeep's steering and suspension performance with Synergy Manufacturing Heavy Duty Ball Joint and Chassis Grease. Specifically formulated for the high-load requirements of off-road vehicles, this high-viscosity lubricant is engineered to reduce friction and prevent premature wear in critical front-end components.

Fits select 1984-2018 Jeep Wrangler TJ, LJ, and JK, Cherokee XJ, and Grand Cherokee ZJ.

• Extreme pressure (EP) additives for superior load-carrying capacity
• High water resistance to protect against corrosion and washout in off-road environments
• Designed for use in serviceable ball joints, tie rod ends, drag links, and control arm bushings
• Compatible with Synergy Manufacturing suspension components and factory greaseable joints
• Ideal for routine maintenance to extend component service life

Fits 2007-2018 Jeep Wrangler JK and JKU (2-door and 4-door models).

The Synergy Manufacturing HD Steering Kit (8025-01) is engineered to replace the vulnerable factory steering linkage on your Jeep Wrangler. This heavy-duty upgrade is designed to handle the increased stress of larger tires and off-road use, replacing the stock tie rod and drag link with high-strength components that resist bending and improve overall steering feel and response.

• Heavy-duty replacement for factory tie rod and drag link components
• Designed to withstand high-stress off-road conditions and larger tire diameters
• Direct bolt-on installation to factory mounting points
• Engineered to maintain proper steering geometry
• Manufacturer Part Number: 8025-01

Fits 2018-2024 Jeep Wrangler JL and JLU (2-Door & 4-Door models).

Strengthen your vehicle's chassis with the Synergy Manufacturing Rear Track Bar Brace (8880-01). This heavy-duty reinforcement is engineered to address a common weak point in the JL platform: the factory frame-side track bar bracket. Under the stress of larger tires or aggressive off-road use, the stock mount can flex, deflect, or eventually crack and fail. This brace distributes lateral suspension loads more effectively, ensuring your track bar remains securely anchored.

• Reinforces the factory frame-side rear track bar mount to prevent bracket failure
• Improves suspension rigidity and rear-end stability by reducing mount deflection
• Laser-cut and CNC-bent construction for a precision fit over the OEM bracket
• Durable powder-coat finish provides superior corrosion and abrasion resistance
• Designed as a bolt-on solution for straightforward installation
• Manufacturer Part Number: 8880-01

Fits 1994-2008 Dodge Ram 4x4 models. This Synergy Manufacturing Sector Shaft Stud is a critical replacement component for steering box brace systems, designed to stabilize the steering box and reduce lateral movement of the sector shaft.

By providing a secure mounting point for the steering box brace bearing, this stud helps eliminate frame flex and steering wander, contributing to a more precise steering feel and extending the life of the steering box internals. The high-strength construction is finished with a durable plating to ensure reliability in demanding under-chassis conditions.

• Direct fit for 1994-2008 Dodge Ram 4x4 steering systems
• Zinc-plated finish for maximum corrosion resistance
• Designed for use with steering box brace assemblies
• Reduces sector shaft deflection and steering box stress
• Manufacturer Part Number: 855702-PL

Fits 1994-2002 Dodge Ram pickup trucks.

The Synergy Manufacturing Front Track Bar Conversion Bracket (8554-02) is a heavy-duty suspension component designed to upgrade the steering geometry on second-generation Dodge Ram trucks. This bracket facilitates the conversion of the factory track bar setup to a more robust design, helping to eliminate front-end wander and maintain precise axle alignment under load.

• Specifically designed for 1994-2002 Dodge Ram front-end applications
• Relocates the frame-side mounting point for improved track bar performance
• Heavy-duty construction for increased durability and steering response
• Compatible with track bar conversion upgrades to reduce common steering play
• Manufacturer Part Number: 8554-02

Fits select 2014-2024 Ram 2500 and 3500 4WD trucks.

The Synergy Heavy Duty Steering Kit (MPN 8725-01) is engineered to replace the failure-prone factory steering linkage on late-model Ram heavy-duty trucks. Designed for drivers running larger tires or navigating rough terrain, this kit addresses the common issues of steering wander and component deflection by utilizing heavy-wall tubing and oversized hardware. It provides a direct-bolt-on upgrade that maintains proper steering geometry while significantly increasing the strength of the tie rod and drag link assemblies.

• Heavy-duty construction designed to resist bending and deformation under load
• Replaces factory drag link and tie rod components with high-strength alternatives
• Maintains factory steering stabilizer mounting locations
• Compatible with stock or lifted height applications
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 8725-01

Fits 2003-2013 Dodge Ram 1500 (Gas), 2500 (Diesel), and 3500 (Diesel) models.

These Synergy Manufacturing 3.0-inch lift coil springs are engineered to improve the stance and off-road performance of your heavy-duty Ram. Designed as a direct replacement for the factory front springs, they provide additional ground clearance and room for larger tire configurations while maintaining a controlled, predictable ride quality on and off the pavement.

The 8555-30-HD series features a spring rate specifically tuned for the weight of Cummins diesel engines and heavy-duty gas applications, preventing the sagging often associated with lesser aftermarket springs. These coils are finished in a durable coating to resist corrosion and the harsh environments typical of under-vehicle components.

• Provides 3.0 inches of lift height for improved tire clearance
• Optimized spring rates for heavy-duty Dodge Ram applications
• Compatible with 2003-2013 Ram 1500 Gas and 2500/3500 Diesel platforms
• Direct-fit installation into factory spring buckets
• Manufacturer Part Number: 8555-30-HD

Fits 1984-2006 Jeep TJ Wrangler, LJ Wrangler Unlimited, XJ Cherokee, ZJ Grand Cherokee, and MJ Comanche.

The Synergy Manufacturing Front Adjustable Track Bar is a critical upgrade for any lifted Jeep, designed to re-center the front axle and restore correct suspension geometry. By replacing the non-adjustable factory unit, this heavy-duty bar allows for precise alignment, helping to eliminate axle shift and reduce the risk of steering instability or "death wobble."

• Adjustable design allows for precise axle centering at various lift heights
• Heavy-duty construction provides superior strength over thin OE components
• Improves overall handling and steering response for on and off-road use
• Bolt-on installation to factory mounting points
• Manufacturer Part Number: 8155-01

Fits 1984-2006 Jeep Cherokee XJ, Grand Cherokee ZJ, Wrangler TJ, and Wrangler Unlimited LJ models.

The Synergy Heavy Duty Steering Kit (8121-00) is a comprehensive upgrade designed to replace the weak factory steering linkages on select Jeep models. Engineered for off-road durability, this kit provides the necessary strength to handle larger tires and demanding trail conditions, significantly reducing steering play and improving front-end rigidity.

• Direct bolt-on replacement for the factory tie rod and drag link.
• Heavy-duty construction designed for increased load and impact resistance.
• Improves steering feel and response by minimizing deflection in the linkage.
• Designed to fit 1984-2001 Cherokee XJ, 1993-1998 Grand Cherokee ZJ, and 1997-2006 Wrangler TJ/LJ.
• Manufacturer Part Number: 8121-00.

Fits 2007-2018 Jeep Wrangler JK and 2018-present Jeep Wrangler JL/JLU models.

The Synergy Manufacturing HD Single Plane Tie Rod End is engineered to solve the common issue of "tie rod flop" in heavy-duty steering systems. By utilizing a single-plane design, this tie rod end restricts rotational movement while maintaining full steering travel, ensuring more precise steering feel and preventing component interference during extreme articulation.

• Metal-on-metal bearing surface provides maximum durability and resistance to deformation under high loads.
• Single-plane design eliminates rotational movement to prevent steering dead zones.
• 1-14 LH (Left Hand) thread pitch compatible with Synergy HD steering components.
• Greaseable assembly for serviceability and extended service life.
• Includes castle nut and cotter pin for secure installation.
• Manufacturer Part Number: 4164-L

Fits 2007-2018 Jeep Wrangler JK models equipped with a 1-3/8 inch (1.375") outer diameter aftermarket or heavy-duty tie rod.

The Synergy Manufacturing Steering Stabilizer Tie Rod Clamp provides a robust mounting solution for any steering stabilizer that utilizes a 1/2 inch mounting bolt. Designed to replace weak or imprecise universal clamps, this component is CNC machined to ensure a precision fit on 1.375 inch OD tubing, preventing the stabilizer from slipping or rotating during aggressive off-road use.

• CNC machined for a precise, slip-free fit on 1-3/8" (1.375") OD tie rods
• Designed to accept steering stabilizers with a 1/2" mounting bolt
• Provides a secure attachment point for improved steering damping and feedback
• Low-profile design helps maintain clearance for other suspension and steering components
• Manufacturer Part Number: 4050-38

Fits 1994-2002 Dodge Ram 1500, 2500, and 3500 4WD trucks.

The Synergy Manufacturing Steering Box Brace is engineered to eliminate steering wander and the common "death wobble" symptoms associated with 2nd Gen Dodge Ram trucks. This bolt-on upgrade stabilizes the steering box sector shaft by tying it to both frame rails, preventing frame flex and reducing the excessive side-to-side movement that wears out steering gears prematurely. It is an essential component for trucks equipped with larger-than-stock tires or those used in demanding off-road conditions.

• Eliminates sector shaft play and improves steering response and feel
• Direct bolt-on installation using factory mounting points
• High-quality greaseable bearing for longevity and serviceability
• Constructed from heavy-duty steel with a durable black powder coat finish
• Includes all necessary hardware for a complete installation
• Manufacturer Part Number: 8557-04

Fits 2014-2024 Ram 2500 4WD trucks. The Synergy Manufacturing Leveling System (MPN 8750-10) is engineered to eliminate the factory nose-down rake, providing a level stance and the necessary clearance for larger tire and wheel combinations.

This system is designed as a direct-fit solution that maintains optimal suspension geometry and factory ride quality. By lifting the front of the vehicle, it improves approach angles and aesthetics without compromising the truck's heavy-duty towing and hauling capabilities. Every component is built to withstand the rigors of off-road use while ensuring reliable on-road performance.

• Corrects factory rake for a balanced, level appearance
• Provides increased clearance for larger tires and wheels
• Engineered to maintain OE ride quality and suspension travel
• Direct-fit installation for 2014+ Ram 2500 4WD models
• Manufacturer Part Number: 8750-10

Fits 2014+ Ram trucks. The Synergy MFG Dual Steering Stabilizer Mounting Kit (8710-02) provides a robust, heavy-duty bracket system designed to enhance steering stability and reduce front-end shimmy, particularly on vehicles running oversized tires. By adding a second steering damper, this system helps neutralize steering feedback and protects your steering gearbox from excessive wear.

This kit is engineered for a direct bolt-on installation, utilizing precision-formed brackets to ensure proper geometry and clearance. It is a necessary upgrade for owners looking to eliminate "death wobble" tendencies and improve tracking on and off-road. Please note: this is a hardware mounting kit only; steering stabilizer cylinders are sold separately.

• Direct fit for 2014+ Ram models
• Reduces steering feedback and improves front-end control
• Heavy-duty construction designed to withstand off-road abuse
• Complete bolt-on kit includes all necessary mounting hardware
• Manufacturer Part Number: 8710-02

Fits select 2013-2024 Ram trucks.

The Synergy Manufacturing Dual Steering Stabilizer Bracket is engineered to provide a robust mounting solution for dual steering dampener configurations. This bracket is designed to improve steering feel and mitigate front-end shimmy or feedback, which is common when running oversized tires or high-clearance lift kits on heavy-duty Ram platforms.

• Enables the installation of dual steering stabilizers for increased dampening capacity
• Precision-engineered for 2013 and newer Ram steering geometry
• Constructed from high-strength steel for maximum durability under off-road conditions
• Direct-fit design utilizes factory mounting locations for a secure installation
• Finished in a durable coating to resist corrosion and road debris
• Manufacturer Part Number: 8710-01

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited JKU models.

The Synergy 8075-02 Front Track Bar is engineered to center the front axle under your Jeep after installing a suspension lift. Proper axle alignment is critical for maintaining correct steering geometry and preventing handling issues. This heavy-duty adjustable bar allows for precise centering and replaces the weaker factory unit with a more robust component designed for the rigors of off-road use.

• Allows for precise centering of the front axle on lifted Jeep JK applications
• On-vehicle adjustable design enables easy length changes without removing the bar
• Heavy-duty construction improves steering feel and resists bending under trail stress
• Includes high-quality bushings for reduced deflection and maintenance-free operation
• Compatible with factory or aftermarket steering stabilizers
• Manufacturer Part Number: 8075-02

Fits 2007-2018 Jeep Wrangler JK and JKU models.

These Synergy Manufacturing Front Sway Bar Links are engineered to replace the factory components on your Jeep, ensuring reliable operation of the front anti-roll system. By connecting the sway bar to the axle, these links help manage body roll and maintain stability during cornering and off-road maneuvers. They are built to withstand the increased articulation and stress common in modified suspension setups.

• Compatible with all 2007-2018 Jeep Wrangler JK and JKU (2-door and 4-door) models
• Heavy-duty construction for improved durability over OE plastic or thin-wall links
• Designed to maintain proper sway bar geometry
• Direct-fit replacement for straightforward installation
• Includes one pair of front sway bar links and necessary mounting hardware
• Manufacturer Part Number: 8059-11

Fits 2007-2018 Jeep Wrangler JK and JKU models. This Synergy Heavy Duty 1.5-inch Tie Rod is engineered as a direct bolt-on replacement for the weak factory steering linkage, providing the necessary strength for off-road use and larger tire setups.

• Heavy-duty 1.5-inch diameter construction for increased rigidity and impact resistance
• Direct replacement for factory Jeep JK tie rod units
• Engineered to maintain steering alignment and resist bending under heavy load
• Designed for compatibility with lifted applications and high-clearance requirements
• Manufacturer Part Number: 8002-15

Fits 1994-2018 Dodge Ram 1500, 2500, and 3500 4WD trucks. This Synergy Manufacturing replacement steering box bearing is engineered to maintain the performance of your steering box brace by eliminating sector shaft deflection and reducing steering wander.

As a direct replacement for the bearing found in Synergy steering box brace kits, the SAFL205-16 provides a secondary support point for the steering box sector shaft. This helps distribute the side-loading forces that often lead to premature steering box failure and vague steering feel in heavy-duty Ram applications. The durable housing and precision-ground bearing surface ensure long-term reliability under the stresses of larger tires and off-road use.

• Direct replacement bearing for Synergy Steering Box Braces
• Reduces sector shaft play and improves steering responsiveness
• Heavy-duty construction for 4x4 truck applications
• Helps prevent steering box wear and internal seal leaks
• Manufacturer Part Number: SAFL205-16

Fits 2018-2024 Jeep Wrangler JL and JLU (2-door and 4-door models).

The Synergy Manufacturing HD Adjustable Front Track Bar (MPN 8875-01) is a heavy-duty suspension upgrade designed to center the front axle after installing a lift kit. By restoring proper suspension geometry, this track bar eliminates the axle shift common on lifted Jeeps, resulting in more predictable handling and improved steering response.

• Specifically engineered for 2018+ Jeep Wrangler JL/JLU platforms.
• Constructed from heavy-duty tubing to minimize deflection and resist bending under off-road stress.
• On-vehicle adjustability allows for precise centering of the axle without removing the component from the vehicle.
• Direct bolt-on replacement for the factory unit, utilizing OEM mounting points for a straightforward installation.
• Manufacturer Part Number: 8875-01.

Fits 2018-2024 Jeep Wrangler JL/JLU and 2020-2024 Gladiator JT.

The Synergy Manufacturing Sector Shaft Brace Bearing Block (8869-02) is a precision-engineered component designed to reinforce the steering system on late-model Jeeps. This bearing block works in conjunction with the Synergy brace system to support the steering box sector shaft, significantly reducing the leverage and stress placed on the steering box internals when running oversized tires. By providing a secondary point of support, it minimizes shaft deflection and helps eliminate steering wander and the frame-side flex often encountered during technical off-roading.

• Compatible with 2018-2024 Jeep Wrangler JL/JLU and 2020-2024 Gladiator JT
• Reduces steering box sector shaft deflection and internal gear wear
• Reinforces the steering system to handle the increased loads of larger tire diameters
• CNC machined construction ensures exact tolerances and long-term durability
• Essential component for stabilizing steering geometry and improving driver feedback
• Manufacturer Part Number: 8869-02

Fits 2018-2023 Jeep Wrangler JL and Gladiator JT models.

The Synergy Manufacturing Front Track Bar and Sector Shaft Brace is engineered to eliminate frame-side track bar bracket deflection and prevent steering box sector shaft failure. On the Jeep JL and JT platforms, the steering box and track bar bracket are subject to high stress, especially when running larger tires or navigating technical terrain. This bolt-on brace ties these two critical points together, distributing loads more effectively across the frame to improve steering feel and long-term durability.

• Reinforces the frame-side track bar bracket to prevent fatigue and cracking
• Supports the steering box sector shaft to eliminate side-loading and steering wander
• Laser-cut and CNC-bent from high-strength steel for precise fitment
• Durable gray powder coat finish for maximum corrosion resistance
• 100% bolt-on installation using standard hand tools
• Compatible with most aftermarket track bars
• Manufacturer Part Number: 8869-01