Fits 2020-Present Jeep Gladiator JT.

The Synergy Rear Brake Lines for the Jeep Gladiator JT are engineered to provide a reliable hydraulic connection for your vehicle's rear braking system. Designed specifically for the JT platform, these components ensure consistent fluid delivery and are a vital part of maintaining braking performance and safety on or off the trail.

• Precision fit for 2020-Present Jeep Gladiator JT
• Optimized for rear axle application
• Designed for durability and long-term reliability
• Manufacturer Part Number: 8866-05

Fits Jeep Wrangler JL and JLU models.

Maintain consistent braking performance on your Jeep Wrangler JL/JLU with Synergy Manufacturing Rear Brake Lines. These lines are engineered to replace factory components, ensuring your hydraulic system delivers a firm, reliable pedal feel whether you are on the pavement or the trail. Built to withstand the rigors of heavy off-road use, these rear lines provide the durability and length required for modified suspension setups.

• Designed specifically for Jeep Wrangler JL and JLU rear applications
• Direct replacement for original equipment brake lines
• Durable construction resists expansion under high hydraulic pressure
• Accommodates increased suspension travel on lifted vehicles
• Manufacturer Part Number: 8866-04

Fits Jeep Wrangler JL, JLU, and Gladiator JT models. This Synergy Manufacturing Front Brake Line Kit (8866-03) is a direct-fit solution for the front braking system of your vehicle. Designed specifically for the JL and JT chassis, these lines provide a reliable replacement for factory components, ensuring consistent hydraulic pressure and brake system integrity during suspension cycling.

• Compatible with Jeep Wrangler JL/JLU and Gladiator JT
• High-quality front brake line replacement
• Designed for precise fitment and system reliability
• Manufacturer Part Number: 8866-03

Fits 2018-2024 Jeep Wrangler JL and JLU (2-door and 4-door) models.

The Synergy Manufacturing HD Adjustable Rear Track Bar is designed to re-center the rear axle of your lifted Jeep Wrangler JL/JLU. When installing a suspension lift, the factory track bar pulls the axle off-center; this heavy-duty replacement allows for precise centering to ensure proper suspension geometry and handling characteristics.

• Adjustable length allows for fine-tuning of axle position on-vehicle
• Heavy-duty construction for increased durability over the factory component
• Designed to clear most aftermarket differential covers
• Replaces the factory rear track bar using existing mounting points
• Manufacturer Part Number: 8862-01

Fits 2018-2024 Jeep Wrangler JL and JLU models. These Synergy Manufacturing Rear Sway Bar Links are designed to correct sway bar geometry on lifted vehicles or replace damaged factory units. Proper link length is critical for maintaining suspension stability and preventing the sway bar from flipping over-center during high-articulation off-road maneuvers.

• Manufactured from heavy-duty steel for increased rigidity over OE components
• Clear zinc plating provides maximum corrosion resistance against road salt and trail debris
• Direct bolt-on installation to factory mounting points
• Helps maintain proper rear sway bar operating angle
• Sold as a pair
• Manufacturer Part Number: 8861-11

Fits 2018-2024 Jeep Wrangler JL and JLU (2-Door & 4-Door) models.

Correct your suspension geometry and restore handling precision with Synergy Manufacturing Rear Sway Bar Links. These heavy-duty components are designed to replace factory links that are often prone to bending or are no longer at the correct length following a suspension lift. By returning the sway bar to its optimal operating angle, these links prevent the bar from over-centering during off-road articulation and ensure consistent roll stiffness on the street.

Engineered for a straightforward bolt-on installation, these links utilize factory mounting points for a secure fit. The assembly features high-quality bushings designed to withstand the rigors of off-road use while resisting environmental degradation. Whether you are replacing worn-out OE parts or correcting geometry on a modified Jeep, these links provide the durability and performance required for the JL platform.

• Manufacturer Part Number: 8860-11
• Direct bolt-on replacement for factory rear sway bar links
• Maintains proper sway bar geometry for improved handling and stability
• Heavy-duty construction for increased durability over stock components
• Includes all necessary hardware for a complete installation

Fits 2018-2024 Jeep Wrangler JL/JLU and 2020-2024 Jeep Gladiator JT.

Improve your suspension's geometry and handling with these Synergy Front Sway Bar Links. Designed as a heavy-duty replacement for factory components, these links (MPN 8859-11) are engineered to withstand the rigors of off-road use while maintaining stable, predictable on-road performance. These links are a critical upgrade for owners looking to replace worn-out OE bushings or reinforce their suspension system against the increased stresses of larger tires and rugged terrain.

• Direct bolt-on installation to factory mounting points
• Heavy-duty construction resists bending and fatigue under articulation
• Maintains proper sway bar operating angles for improved roll control
• Complete set for front axle application
• Manufacturer Part Number: 8859-11

Restores proper steering geometry and improves handling on lifted 2018-2024 Jeep Wrangler JL and Gladiator JT models. The Synergy Manufacturing Front Track Bar Relocation Bracket (8855-11) is designed to raise the axle-side track bar mounting point, keeping it parallel with the drag link to eliminate bump steer and optimize the vehicle's roll center.

• Fits 2018-2024 Jeep Wrangler JL and Gladiator JT (all trims)
• Raises axle-side track bar mount to match drag link angle
• Corrects steering geometry to eliminate bump steer and improve stability
• Direct bolt-on installation using factory mounting points
• Heavy-duty construction designed for off-road durability
• Manufacturer Part Number: 8855-11

Fits 2007-Present Jeep Wrangler JK, JKU, JL, and JLU models.

Synergy Manufacturing adjustable rear upper control arms are engineered to restore proper suspension geometry on lifted Jeep Wranglers. These arms provide the adjustability needed to fine-tune the rear pinion angle, a critical step in eliminating driveline vibrations and preventing premature wear on U-joints and seals after installing a suspension lift.

• Provides precise rear pinion angle adjustment for lifted Jeeps
• Heavy-duty construction designed to withstand off-road abuse
• Adjustable length allows for centering the axle in the wheel well
• Compatible with both 2-door and 4-door Wrangler models
• Sold as a pair
• Manufacturer Part Number: 8854-01

Fits 2018-2024 Jeep Wrangler JL and JLU models.

These Synergy Manufacturing Adjustable Front Lower Control Arms (8851-01) are engineered to restore proper suspension geometry on lifted Jeep Wrangler JL applications. By replacing the non-adjustable factory arms, these heavy-duty components allow for precise caster correction, which is essential for maintaining stable steering and predictable handling after installing a lift kit.

• Provides necessary caster correction for lifted vehicles to eliminate "flighty" steering
• Adjustable design allows for fine-tuning alignment for both on-road and off-road performance
• Replaces weak factory stamped-steel arms with heavy-duty construction for increased durability
• Designed for easy installation into factory mounting locations
• Includes one pair of front lower control arms
• Manufacturer Part Number: 8851-01

Fits 2018-2024 Jeep Wrangler JL and JLU models.

The Synergy Manufacturing Parking Brake Cable Relocation Bracket (8818-01) is a critical addition for lifted Jeep JLs. When increasing ride height or installing long-travel suspension, the factory parking brake cables often become the limiting factor during suspension droop, leading to binding or potential cable failure. This bracket relocates the cable mounting points to provide the necessary slack for unrestricted suspension cycling.

• Prevents parking brake cable binding and tension on lifted vehicles
• Relocates mounting points to accommodate increased suspension travel
• Laser-cut and CNC bent from high-strength steel for precise fitment
• Clear zinc plated for long-lasting corrosion resistance
• Simple bolt-on installation using factory mounting locations
• Manufacturer Part Number: 8818-01

Fits 2018-2024 Jeep Wrangler JL models.

Synergy Manufacturing Hub Centric Wheel Spacers provide the additional offset required to clear larger tires and prevent rubbing on suspension or chassis components. By maintaining a hub-centric design, these spacers ensure the wheel remains perfectly centered on the hub, directing the load to the axle rather than just the wheel studs to eliminate vibration at highway speeds.

• Provides 1.75 inches (1-3/4") of track width per side for improved tire clearance.
• Hub-centric design specifically engineered for the Jeep JL factory hub.
• Corrosion-resistant construction suitable for harsh off-road environments.
• Includes pre-installed M14 x 1.50 wheel studs and mounting lug nuts.
• Easy bolt-on installation to factory wheel hubs.

• Manufacturer Part Number: 8810-02
• Bolt Pattern: 5x5 inches (5x127mm)
• Spacer Thickness: 1.75 inches
• Stud Size: M14 x 1.50

Fits 2018-2024 Jeep Wrangler JL and JLU models equipped with the factory stock tie rod.

The Synergy Manufacturing Steering Stabilizer Relocation Kit (8807-04) is engineered to move the steering stabilizer out of harm's way. On the Jeep Wrangler JL, the factory stabilizer position is vulnerable to impacts from rocks and trail debris. This kit relocates the stabilizer above the tie rod, significantly increasing ground clearance and protecting the stabilizer body and shaft from off-road damage.

• Relocates the steering stabilizer above the tie rod for maximum protection
• Specifically designed for compatibility with the OEM stock tie rod
• Bolt-on installation requires no permanent vehicle modifications
• Heavy-duty steel construction for long-term durability
• Manufacturer Part Number: 8807-04

Fits 2018-2024 Jeep Wrangler JL and Wrangler Unlimited JLU models.

Protect your steering stabilizer from impact and trail damage with the Synergy Manufacturing Steering Stabilizer Relocation Kit (MPN 8807-03). The factory mounting position hangs the stabilizer below the tie rod, leaving it vulnerable to rocks and obstacles. This kit relocates the stabilizer above the tie rod, significantly increasing ground clearance and keeping the damper out of harm's way.

• Relocates steering stabilizer to a protected position above the tie rod
• CNC laser-cut and CNC-formed construction for precise fitment
• Bolt-on installation requires no welding or permanent vehicle modifications
• Durable finish for long-term corrosion resistance
• Includes relocation bracket and all necessary mounting hardware

Fits 2007-2024 Jeep Wrangler JK, JKU, JL, and JLU models.

The Synergy Manufacturing Steering Stabilizer Mount Stud (8806-01) provides a secure, high-strength attachment point for relocating your steering stabilizer. By utilizing the factory track bar mounting location on the axle, this stud allows you to move the stabilizer up and out of the way of potential trail obstacles, a common requirement for lifted Jeeps or those with upgraded steering linkages.

• Replaces the factory track bar bolt to provide a dedicated 1/2-inch mounting stud for the steering stabilizer eyelet
• Constructed from high-strength steel to withstand the lateral forces of the steering system
• Zinc-plated finish for long-lasting corrosion resistance in harsh underbody environments
• Essential component for high-clearance steering stabilizer relocation
• Manufacturer Part Number: 8806-01

Fits 2018-2024 Jeep Wrangler JL and JLU models.

The Synergy Manufacturing Drag Link Flip Adapter (8800-02) is an essential component for correcting steering geometry on lifted vehicles. By allowing the drag link to be mounted to the top of the steering knuckle, this adapter helps restore proper drag link angles to eliminate bump steer and improve handling characteristics both on the road and the trail.

• Designed specifically for 2018+ Jeep Wrangler JL/JLU steering knuckles
• Facilitates a drag link flip to restore factory steering angles on lifted applications
• Precision-machined for a secure, tight fit to ensure steering system integrity
• Durable construction built to withstand the rigors of off-road use
• Manufacturer Part Number: 8800-02

Fits select 2018-2024 Jeep Wrangler JL and JLU models.

The Synergy Manufacturing HD Drag Link (8800-01) is a heavy-duty steering upgrade designed to replace the weak factory unit on the Jeep Wrangler JL platform. Engineered to withstand the increased leverage of larger tires and the rigors of off-road use, this drag link provides a significant increase in steering strength and stiffness, reducing the deflection and bending common in OEM components.

• Heavy-duty construction designed for lifted applications and oversized tires
• Fully adjustable on the vehicle, allowing for easy steering wheel centering without removal
• Direct bolt-on replacement using factory mounting points
• Equipped with robust, greaseable tie rod ends for extended service life
• Zinc plated and powder coated finish for maximum corrosion resistance
• Manufacturer Part Number: 8800-01

Fits 2014-2024 Ram 2500 4WD models.

Level your truck's stance and improve ride quality with Synergy Front Leveling Coil Springs. These springs are specifically engineered to eliminate the factory rake, providing a more aggressive appearance and increased ground clearance for larger tire fitment. Unlike basic spacers, these replacement coils are designed to maintain factory-like ride comfort and load-handling performance by utilizing precise spring rates optimized for the Ram 2500 platform.

• Provides a leveled stance by raising the front of the vehicle
• Direct-fit replacement for factory front coil springs
• Manufactured from high-tensile spring steel for maximum durability and sag resistance
• Designed to work with factory or aftermarket shocks
• Powder-coated finish for superior corrosion protection
• Manufacturer Part Number: 8755-20

The Synergy Manufacturing Leveling System for 2013-2024 Ram 3500 4WD trucks is engineered to eliminate the factory rake, providing a level stance and increased ground clearance for larger tire and wheel combinations. This system focuses on improving the vehicle's aesthetic and off-road capability without compromising the ride quality expected from a heavy-duty platform.

Designed to integrate with the factory radius arm suspension, this kit ensures that suspension geometry remains within functional limits. It is a direct-fit solution that addresses the front-end height to balance the truck's profile while maintaining the durability required for towing and hauling.

• Fits 2013-2024 Ram 3500 4WD models.
• Corrects factory nose-down rake for a level appearance.
• Increases front-end ground clearance for larger tires.
• Maintains original equipment (OE) ride quality and handling.
• Manufacturer Part Number: 8750-11

Fits select 2014-2024 Ram 2500 4WD trucks.

The Synergy Manufacturing Front Radius Arm Drop Brackets (8730-03) are engineered to correct suspension geometry on lifted Ram 2500 applications. By lowering the radius arm mounting points at the frame, these brackets restore factory caster settings and improve overall ride quality. Correcting the arm angle reduces the harshness felt when hitting bumps and eliminates the "flighty" steering feel often associated with suspension lifts.

Constructed from heavy-duty steel and finished with a durable powder coat, these brackets are designed to withstand off-road use while maintaining precise alignment tolerances. The design utilizes factory mounting locations for a secure, bolt-on installation that avoids the need for permanent frame modifications.

• Corrects caster on lifted 2014+ Ram 2500 models
• Restores factory radius arm geometry for improved ride quality
• Heavy-duty steel construction with a durable finish
• Bolt-on installation into factory mounting points
• Manufacturer Part Number: 8730-03

Fits select 2013-2024 Ram trucks.

Protect your steering stabilizer from impact and trail damage with the Synergy Steering Stabilizer Relocation Bracket (MPN: 8703-02). On stock RAM configurations, the stabilizer is positioned low, leaving it vulnerable to rocks and debris. This bracket relocates the stabilizer mount on the axle side, moving the component up and out of harm's way to significantly improve ground clearance.

Constructed from high-strength steel and finished for long-term corrosion resistance, this bracket is engineered to withstand the rigors of off-road use. It provides a more secure mounting position, correcting the stabilizer geometry for vehicles with suspension modifications while maintaining compatibility with both factory and most aftermarket stabilizers.

• Relocates steering stabilizer to provide increased ground clearance and protection
• Heavy-duty steel construction for maximum rigidity and durability
• Simple bolt-on installation using existing factory mounting points
• Compatible with factory and many aftermarket steering stabilizers
• Manufacturer Part Number: 8703-02

Fits 2013-2024 Ram 2500 and 3500 Heavy Duty trucks.

The Synergy Manufacturing Heavy Duty Drag Link is a robust steering upgrade designed to replace the factory unit on late-model Ram HD pickups. This component (MPN 8701-01) is engineered to provide increased steering feel and the structural integrity required for heavy-duty use, towing, and off-road applications where factory links often reach their limits.

Designed for a direct bolt-on installation, this drag link mounts to the factory steering points without modification. It is built to handle the increased stress of larger wheel and tire packages, providing a reliable solution for owners looking to replace a worn OE component or upgrade their steering geometry for better performance.

• Direct fitment for 2013-2024 Ram 2500/3500 Heavy Duty models
• Heavy-duty construction improves steering response and durability
• Replaces factory drag link using original mounting points
• Manufacturer Part Number: 8701-01

Fits 2005-2024 Ford F-250 and F-350 Super Duty 4x4 models equipped with gas engines.

The Synergy Manufacturing Leveling System (MPN 8650-22) is engineered to correct the factory rake and improve the stance of your 4WD Ford Super Duty. This system provides the necessary front-end lift to level the vehicle, allowing for increased ground clearance and the fitment of larger wheel and tire combinations without compromising the truck's heavy-duty suspension integrity.

Designed for precise fitment on 4x4 gas-powered models, this system helps maintain factory ride quality while ensuring proper suspension geometry. Whether you are navigating rough terrain or improving your truck's aesthetic, this leveling kit provides a durable solution built to handle the demands of the Super Duty platform.

• Specifically tuned for 2005-2024 Ford Super Duty F-250/F-350 4x4 gas trucks
• Corrects factory nose-down rake for a level, aggressive profile
• Provides additional clearance for larger tire fitment
• Direct fitment to factory mounting points
• Manufacturer Part Number: 8650-22

Fits 2005-present Ford F-250 and F-350 Super Duty 4x4 trucks equipped with diesel engines.

This Synergy Manufacturing Leveling System (MPN 8650-12) is engineered to eliminate the factory rake on Ford Super Duty trucks, providing a level stance and improved ground clearance. Designed specifically to handle the front-end weight of heavy diesel powertrains, this system allows for the installation of larger tire and wheel packages while maintaining a comfortable ride and factory-like handling characteristics.

• Specifically tuned for 2005+ Ford Super Duty 4x4 diesel applications
• Corrects vehicle stance by leveling the front end with the rear
• Engineered to accommodate larger tires and wheels for improved off-road capability
• High-strength construction designed for heavy-duty towing and hauling use
• Direct-fit components for a straightforward installation process
• Manufacturer Part Number: 8650-12

Fits 2003-2013 Dodge Ram 1500, 2500, and 3500 4x4 models.

The Synergy Manufacturing Heavy Duty Tie Rod (8568-21) is a robust steering upgrade designed to replace the often-vulnerable factory steering linkage on Dodge Ram trucks. Engineered to withstand the increased stress of larger tires and aggressive off-road use, this heavy-duty component significantly reduces steering flex and helps maintain precise wheel alignment. This tie rod is a critical upgrade for owners looking to eliminate steering wander and improve the overall durability of their front-end assembly.

• Designed for maximum strength and durability in heavy-duty and off-road applications.
• Direct-fit replacement for the OE tie rod assembly.
• Helps maintain steering precision and reduces front-end shimmy or wander.
• Compatible with 4x4 drivetrain configurations on stock or lifted trucks.
• Manufacturer Part Number: 8568-21.

Fits 1994-1999 Dodge Ram 1500, 2500, and 3500 4x4 trucks.

The Synergy Manufacturing Heavy Duty Drag Link (8567-13) is engineered to replace the undersized factory steering linkage on second-generation Dodge Ram trucks. This heavy-duty upgrade provides significantly increased strength and stiffness compared to original equipment, helping to eliminate steering play and front-end wandering—especially on vehicles equipped with larger-than-stock tires.

• Direct bolt-on replacement for the factory drag link to restore steering precision.
• Heavy-duty construction designed to withstand the increased stresses of off-road use and oversized wheel setups.
• Compatible with 4x4 drivetrains on 1500, 2500, and 3500 chassis.
• Helps maintain correct steering geometry and improves overall front-end durability.
• Manufacturer Part Number: 8567-13.

Fits 2000-2002 Dodge Ram 1500, 2500, and 3500 4x4 trucks.

The Synergy Heavy Duty Drag Link (8567-12) is engineered to replace the factory steering components on 2000-2002 Dodge Ram 4x4 models. Built to handle the increased stresses of larger tires and off-road use, this heavy-duty drag link provides a significant upgrade in steering precision and long-term durability compared to the original equipment.

• Specifically designed for 2000-2002 Dodge Ram 1500/2500/3500 4WD chassis.
• Heavy-duty construction improves steering response and reduces component deflection under load.
• Engineered to withstand the rigors of heavy hauling, towing, and off-road driving.
• Direct replacement for the factory drag link for straightforward installation.
• Manufacturer Part Number: 8567-12

Fits 2003-2013 Dodge Ram 1500, 2500, and 3500 4x4 models equipped with T-style steering geometry.

The Synergy Manufacturing Heavy Duty Drag Link is engineered to solve the common steering weaknesses found in 4WD Dodge Ram trucks. Designed specifically for vehicles utilizing the T-style steering setup, this drag link replaces the undersized factory component with a high-strength alternative that improves steering feel and reduces deflection. It is an essential upgrade for trucks equipped with larger tires or those subjected to heavy off-road use.

• Direct replacement for 2003-2013 Dodge Ram 4x4 factory drag links (T-style steering).
• Heavy-duty construction increases steering system rigidity and durability.
• Designed to handle the increased loads and leverage of oversized tires.
• Precision-engineered for reliable fitment and long-term performance.
• Manufacturer Part Number: 8567-11

Fits 2000-2009 Dodge Ram 1500, 2500, and 3500 4x4 models.

The Synergy Manufacturing Cam Bolt Eliminator Kit (MPN 8565-02) is a heavy-duty solution for the common issue of front-end alignment shift in 4WD Ram trucks. The factory 16mm eccentric cam bolts on the lower control arms are prone to slipping under heavy load, high torque, or off-road stress. This kit replaces those adjustable cams with fixed hardware to "lock out" the mounting point and maintain your alignment settings.

This kit is essential for vehicles with larger tires or those frequently used on rough terrain. By replacing the OE eccentric washers with precision lockout plates, you eliminate the risk of the bolt rotating within the bracket. This provides a more secure connection for the front axle, ensuring consistent handling and reduced tire wear.

• Replaces factory 16mm eccentric cam bolts
• Prevents alignment slipping and movement under heavy stress
• Ideal for trucks with aftermarket adjustable control arms
• Heavy-duty steel construction with precision-fit lockout plates
• Manufacturer Part Number: 8565-02

Fits 2009-2018 Dodge Ram 2500 and 3500 4WD trucks.

The Synergy Manufacturing Steering Box Brace (8559-04) is an essential upgrade for heavy-duty Ram owners looking to eliminate steering wander and the dreaded "death wobble." This brace works by supporting the steering box sector shaft and tying the frame rails together, significantly reducing the frame flex and sector shaft deflection common in these platforms. Whether you are running oversized tires or maintain a stock setup, this brace provides the rigidity needed for a more precise steering feel and extended steering box life.

• Eliminates sector shaft play and reduces steering gear wear
• Distributes steering loads across both frame rails for increased rigidity
• Improves overall steering response and on-road stability
• Durable high-strength steel construction with a black powder-coated finish
• 100% bolt-on installation; no cutting, drilling, or welding required
• Compatible with most factory and aftermarket steering stabilizers
• Includes heavy-duty sector shaft nut and Grade 8 mounting hardware

Manufacturer Part Number: 8559-04