Fits 1998-2007 Lexus LX470 and Toyota Land Cruiser Base models.

While replacing bushings is a significant suspension upgrade, the performance of new bushings is often limited by the condition of the original suspension arms and ball joints. The SuperPro TRC461 Front Upper Control Arm Set provides a complete solution for refreshing the front end of your 100-series platform. These assemblies combine an OEM-style upper control arm with an uprated ball joint and pre-installed SuperPro bushings to restore steering precision and long-term durability.

By choosing a complete arm assembly, you eliminate the need for specialized presses to remove and install bushings or ball joints, reducing workshop time and ensuring every component in the assembly is new. These arms are designed as a direct factory replacement, maintaining standard geometry while offering superior service life compared to standard replacement parts.

• Manufacturer Part Number: TRC461
• Includes two complete front upper control arm assemblies
• Pre-installed SuperPro polyurethane bushings for improved response
• Redesigned and uprated ball joints for increased durability
• Standard geometry configuration for factory fitment and alignment
• Direct replacement for worn OE components

Fits 2007-2013 Honda Fit (Base, EV, and Sport).

Upgrade your suspension geometry and front-end response with the SuperPro SPF4261K Front Control Arm Lower Rear Bushing Kit. These offset bushings are engineered to introduce additional positive caster into the front suspension, significantly improving straight-line stability and steering return-to-center. By increasing caster, your vehicle gains dynamic camber during cornering, maximizing the tire's contact patch and resisting shoulder "roll over" for superior grip under load.

Constructed from SuperPro’s proprietary engineering-grade polyurethane formula, these bushings provide a durable alternative to standard rubber. They are designed to withstand extreme temperatures, oils, and road contaminants while maintaining OEM levels of NVH (Noise, Vibration, and Harshness) isolation. This kit delivers enhanced steering weight and feedback without compromising ride comfort or causing premature tire wear.

• Offset design increases positive caster for improved stability and steering feel
• Optimized dynamic camber gain for better cornering performance
• Proprietary polyurethane formula resistant to oil, water, and heat
• Retains factory-level ride quality and passenger comfort
• Designed and manufactured in Australia
• Manufacturer Part Number: SPF4261K
• Lifetime Warranty

Fits select 2004-2021 BMW 1, 2, 3, and 4 Series, M235i, M240i, X1, and X3 models. This kit is specifically designed to address the low service life of the OEM differential mount bushings.

The SuperPro SPF3946K Rear Subframe Mount Bushing Set replaces soft factory rubber with high-grade polyurethane to restore drivetrain precision. By stabilizing the differential within the rear subframe, these bushings eliminate excessive movement that leads to power loss and vague handling. Engineered for a perfect fit, this set is significantly easier to install than traditional replacements and is formulated to deliver zero additional cabin noise (NVH), maintaining factory refinement while increasing durability.

• Direct replacement for high-wear OEM differential mount bushings
• Proprietary polyurethane material for extended service life
• Engineered for easy installation and precise fitment
• Provides improved drivetrain stability with zero cabin noise
• Manufacturer Part Number: SPF3946K

Fits select 2010-2022 Subaru (BRZ, WRX, WRX STI, Forester, Legacy, Outback), Toyota 86, and Scion FR-S.

The SuperPro SPF3907K Rear Subframe Insert Bushing Kit is engineered to reduce excessive movement in the factory subframe without the harshness of a full solid mount. These inserts fill the voids in the original equipment rubber bushings, stabilizing the rear subframe to maintain proper steering geometry and improve overall handling response. This is a critical upgrade for drivers looking to eliminate the vague feel often found during high-speed cornering or aggressive transitions.

• Proprietary engineering-grade polyurethane construction for superior durability
• Remains unaffected by extreme temperatures, oils, water, or coolant
• Designed to provide a quieter, longer-lasting alternative to standard rubber
• Maintains alignment accuracy and improves tire wear characteristics
• Includes SuperPro Lifetime Warranty
• Engineered and manufactured in Australia
• Manufacturer Part Number: SPF3907K

Fits 1988-1992 Toyota Corolla Base, DLX, FX, GTS, LE, and SR5 models.

Replace degraded factory rubber with the SuperPro SPF3435K Rack Mount Bushing kit to restore steering precision and driver feedback. Original equipment rubber bushings soften and perish over time due to exposure to heat, oils, and road grime, resulting in excessive steering rack movement and vague handling. This SuperPro kit is manufactured using a proprietary engineering-grade polyurethane formula that provides a stable mounting point for the steering rack, ensuring consistent wheel alignment and sharper response under load.

• Proprietary polyurethane formula offers superior durability over standard rubber
• Unaffected by extreme temperatures, engine oils, water, or coolant
• Designed, engineered, and manufactured in Australia
• Direct-fit replacement to eliminate steering play and improve alignment retention
• Manufacturer Part Number: SPF3435K
• Includes SuperPro Lifetime Warranty

Fits select 1991-1999 Dodge Stealth and Mitsubishi 3000GT. This SuperPro Front Lower Forward Control Arm Bushing Kit replaces the high-deflection factory rubber bushings with a proprietary engineering-grade polyurethane formula, stabilizing movement to ensure correct suspension geometry is maintained under load.

Worn OE rubber bushings lead to dynamic alignment changes that negatively impact handling precision and accelerate tire wear. These SuperPro bushings provide a superior alternative, engineered for quieter operation and a significantly longer service life compared to standard rubber components. Designed and manufactured in Australia, this kit is highly resistant to extreme temperatures, oils, water, and coolant.

• Part Number: SPF2450K
• Material: Proprietary engineering-grade polyurethane
• Location: Front Lower Forward Control Arm
• Unaffected by oils, coolant, and road contaminants
• Includes SuperPro Lifetime Warranty
• Made in Australia

Vehicle Fitment:

Fits all 1980-1996 Ford Bronco 2WD and 4WD models including Custom, Eddie Bauer, XL, and XLT trims.

Over time, factory rubber body mounts deteriorate due to UV exposure, road grime, and constant compression, leading to body sag and sloppy handling. Prothane polyurethane body mount bushings provide a necessary upgrade for your 1980-1996 Ford Bronco, offering the structural rigidity needed to maintain proper body-to-frame alignment. Unlike soft OE rubber, these precision-engineered mounts resist oil, chemicals, and ozone, ensuring they won't rot or crumble over years of use.

This kit is designed to replace the worn factory mounts at all mounting points, restoring the original ride height and improving the overall feel of the chassis. Whether you are performing a frame-off restoration or simply correcting door gaps and body lines, these red polyurethane mounts provide the durability required for both daily driving and off-road use.

• Manufacturer Part Number: 6-107
• Material: High-density Red Polyurethane
• Resistant to road oils and vehicle fluids
• Maintains proper body-to-frame alignment
• Includes bushings and necessary hardware for installation

Fits 1994-2001 Dodge Ram 2500 and 3500 4WD models.

Restore front-end precision to your heavy-duty truck with Prothane polyurethane front control arm bushings. These bushings are engineered to replace soft, factory rubber components that frequently perish under heavy loads and environmental stress. By upgrading to Prothane’s performance-grade polyurethane, you maintain consistent control arm geometry and alignment, resulting in sharper steering response and improved handling stability.

Unlike standard rubber, this polyurethane formulation is impervious to road salt, oil, and ozone, ensuring a significantly longer service life even in harsh driving conditions.

• Direct replacement for OE rubber bushings to improve suspension kinematics
• High-density polyurethane construction for superior durability
• Resistant to automotive fluids and environmental degradation
• Color: Black
• Manufacturer Part Number: 4-216-BL

Fits all 1986-1989 Suzuki Samurai models including Base, JA, JX, and JX SE.

Standard rubber bushings are often the weak link in a leaf spring suspension, prone to dry rotting, cracking, and excessive deflection under load. This Prothane polyurethane bushing kit (17-1002) is specifically engineered to replace worn factory components, restoring precise suspension geometry and improving handling characteristics. These bushings provide a firmer pivot point, which helps maintain axle alignment during articulation and cornering.

This kit is specifically designed for use with aftermarket shackles, ensuring a proper fit for modified Suzuki Samurai rigs. The red polyurethane construction is resistant to automotive oils, road salt, and environmental degradation that typically destroys OEM rubber.

• Manufacturer Part Number: 17-1002
• Material: High-performance red polyurethane
• Components Included: Spring and shackle bushings
• Application: Compatible with aftermarket shackles
• Fits: 1986-1989 Suzuki Samurai

Fits 2003-2009 Nissan 350Z including Base, Enthusiast, Performance, Touring, Track, and Nismo trims.

Eliminate excessive drivetrain deflection and improve power delivery with the Prothane polyurethane rear differential bushing kit. Factory rubber bushings are designed for comfort but are prone to softening and tearing, which results in significant differential movement and wheel hop during hard acceleration. These high-performance red polyurethane replacements provide a much firmer mount for the differential housing, ensuring more consistent traction and a more connected feel.

• Reduces differential movement to minimize wheel hop and drivetrain slop
• Durable polyurethane construction outlasts factory rubber
• Resistant to automotive oils, road grime, and ozone
• Provides more precise power transfer to the rear wheels
• Manufacturer Part Number: 14-1603
• Color: Red

Fits 1987-1995 Jeep Wrangler YJ models including Base, Sahara, Laredo, Renegade, Rio Grande, S, SE, and Sport.

Replace your soft, worn-out factory rubber with the Prothane 1-1017 Front and Rear Main Spring Eye Bushing Kit. These red polyurethane bushings provide a significant upgrade in suspension stability by maintaining proper leaf spring alignment under load. Unlike OE rubber, which can rot and crack over time due to environmental exposure, Prothane’s high-performance polyurethane is resistant to oil, road salt, and contaminants, ensuring a longer service life and more consistent handling.

• Location: Front and Rear Main Spring Eyes
• Material: High-Density Polyurethane
• Color: Red
• Resistant to rot, road chemicals, and grease
• Replaces flexible OEM rubber for improved suspension response
• Manufacturer Part Number: 1-1017

This kit includes all necessary bushings for the main eyes of both the front and rear leaf springs, restoring the pivot-point integrity of your YJ's suspension system.

Fits 1970-1978 Nissan 240Z, 260Z, and 280Z.

Energy Suspension Hyper-Flex transmission crossmember mount bushings are engineered to replace soft, factory-original rubber mounts that degrade over time. These performance polyurethane bushings provide the rigidity necessary to control drivetrain torque and maintain proper driveshaft angles, protecting your powertrain from unexpected damage and premature wear. Designed to bridge the gap between flimsy OE rubber and harsh solid metal mounts, they are rugged enough for competition use while remaining compliant enough to absorb vibrations for street driving.

• Manufacturer Part Number: 7.1101R
• Material: Hyper-Flex™ Performance Polyurethane
• Color: Red
• Design: Unique safety interlock design for secure mounting
• Durability: Impervious to motor oils, coolants, and road chemicals
• Includes heavy-duty hardware for a complete installation

Fits 2002-2005 Dodge Ram 1500 (SLT, ST, Laramie, and SRT-10 trims).

Upgrade your truck's rear suspension with the Energy Suspension Hyper-Flex Rear Leaf Spring Bushing Set. This kit is engineered to replace soft, factory rubber bushings that degrade over time, leading to sloppy handling and rear-axle shifting. By using firm, performance-grade polyurethane, this set ensures your leaf springs remain properly aligned during hard acceleration, cornering, and braking.

• Manufactured from proprietary Hyper-Flex polyurethane for superior durability and lifespan.
• Proven to last 5 to 10 times longer than conventional rubber components.
• Maintains suspension geometry for improved vehicle control and handling precision.
• Highly resistant to road grime, vehicle fluids, and environmental degradation.
• Complete set for rear leaf spring positions.
• Color: Black
• Manufacturer Part Number: 5.2115G

Fits select 1984-1995 Ford Mustang, Mercury Capri, and Mercury Grand Marquis models. Replace failing factory rubber engine mounts with high-performance Energy Suspension Hyper-Flex polyurethane motor mounts. Engineered to handle the high torque of performance applications while remaining compliant enough for daily street use, these mounts offer the ideal balance of durability and vibration dampening.

Energy Suspension's 4.1122G motor mounts feature a safety interlock design, providing strength comparable to solid metal mounts without the harsh NVH (Noise, Vibration, and Harshness) typically associated with racing components. The Hyper-Flex polyurethane construction is chemically resistant to engine oils, coolants, and road grime, ensuring a service life that far exceeds OE rubber components.

• Hyper-Flex high-performance polyurethane construction
• Torque-resistant safety interlock design for maximum durability
• Resistant to automotive fluids, road salts, and environmental contaminants
• Reduces engine movement to maintain alignment and power transfer
• Compatible with factory mounting points
• Black finish
• Manufacturer Part Number: 4.1122G

Fits 1968-1972 Oldsmobile Cutlass, Cutlass S, Cruiser, and Cutlass Supreme.

Energy Suspension Hyper-Flex™ body mount sets replace worn-out, distorted factory rubber mounts to restore proper body-to-frame alignment and vehicle ride height. While original rubber bushings are prone to cracking, rotting, and crushing over time, and solid aluminum mounts are often too harsh for street use, these polyurethane components offer the ideal balance of durability and ride quality.

Engineered for both street and track applications, this set features a specially formulated polyurethane that resists road oils, salt, and environmental chemicals that typically degrade rubber. Most mounts in this set feature molded-in, zinc-plated steel rings for increased structural integrity and longevity where the application requires it.

• Manufacturer Part Number: 3.4161R
• Material: Hyper-Flex™ Polyurethane
• Color: Red
• Restores and maintains correct body-to-frame alignment
• Maintains factory ride height and chassis feel
• Zinc-plated steel rings molded in for maximum durability

Fits select 1962-2000 Chevrolet and GMC vehicles, including Chevy II, Nova, and C/K 1500, 2500, and 3500 pickup trucks.

Replace soft, deteriorated factory rubber with Energy Suspension Hyper-Flex polyurethane mono leaf spring bushings (3.2122R). Standard rubber bushings are prone to rotting and excessive deflection, which leads to unpredictable handling, wheel hop during acceleration, and rear-end instability under braking. These red polyurethane bushings are engineered to maintain proper rear axle alignment and suspension geometry by resisting the compression and shearing forces that cause rubber to fail.

Energy Suspension's proprietary Hyper-Flex material is significantly more durable than OE rubber, offering a service life 5 to 10 times longer. This upgrade is ideal for restoring the handling precision of classic Novas or maintaining the suspension performance of heavy-duty C/K trucks under load.

• Material: High-performance Hyper-Flex polyurethane
• Components: Mono leaf spring bushing set
• Durability: Resistant to oil, road salt, and ozone to outlast rubber 5-10x
• Performance: Minimizes bushing deflection for better traction and cornering control
• Color: Red
• Manufacturer Part Number: 3.2122R

Fits select 1983-2014 Chevrolet, GMC, and Cadillac vehicles, including Silverado, Sierra, Tahoe, Yukon, Escalade, and S10/S15 models.

The Energy Suspension 3.1129G transmission mount is engineered to provide the durability required for high-performance street and racing applications while maintaining the vibration dampening needed for daily driving. Unlike factory rubber mounts that degrade over time when exposed to oils and torque stress, this mount uses Energy’s Hyper-Flex polyurethane to ensure long-term stability and precise drivetrain alignment.

This Large style mount features a 7.5-inch center-to-center mounting configuration and a unique safety interlock design that physically prevents component separation under extreme loads. The included heavy-duty zinc-plated hardware offers superior corrosion resistance against under-vehicle fluids and road contaminants.

• Material: Hyper-Flex Performance Polyurethane (Black)
• Finish: Zinc-plated heavy-duty hardware
• Mounting Style: Large 7.5" Center-to-Center (7.5 C-C)
• Safety Interlock: Patented design for maximum drivetrain security
• Chemical Resistance: Impervious to vehicle oils, coolants, and road chemicals
• Part Number: 3.1129G

Fits 2008-2014 Subaru Impreza WRX.

The Energy Suspension Hyper-Flex Master Bushing Set (19.18102R) provides a comprehensive performance upgrade by replacing soft, original equipment rubber bushings with high-durometer polyurethane. While factory rubber degrades over time when exposed to oils, road chemicals, and UV radiation, Energy’s proprietary Hyper-Flex formula is engineered to withstand these elements without losing its physical properties. This kit restores suspension geometry and ensures that your vehicle maintains proper caster and camber alignment under high-load conditions.

• Enhanced Handling: Increases steering response and overall control by minimizing suspension deflection.
• Alignment Stability: Helps maintain precise caster and camber settings for improved tire contact and predictable cornering.
• Durability: Hyper-Flex polyurethane is resistant to oils, coolants, and atmospheric pollutants that destroy standard rubber.
• Reduced Wheel Hop: Stiffens the suspension to significantly reduce wheel hop during rapid acceleration.
• Made in the USA: Proudly manufactured in America for consistent quality and fitment.
• Color: Red
• MPN: 19.18102R

Fits 1990-2001 Acura Integra GS, GS-R, LS, RS, and Special Edition models (excludes Type R).

Upgrade your Integra's suspension with the Energy Suspension 16.3109G Hyper-Flex Rear Control Arm Bushing Set. Engineered to replace soft, prone-to-failure factory rubber, these performance polyurethane bushings provide the necessary rigidity to maintain precise wheel alignment and suspension geometry under high-load conditions. The full-floating, non-binding design allows for smoother suspension articulation, resulting in improved steering response, more predictable cornering, and enhanced overall vehicle control.

• Manufactured from Energy Suspension's proprietary Hyper-Flex performance polyurethane
• Maintains better alignment during aggressive street, track, or off-road driving
• Full-floating design prevents binding for more efficient suspension movement
• Highly resistant to oil, road salt, and ozone for long-term durability
• Fits directly into existing factory control arms
• Manufacturer Part Number: 16.3109G

Fits 2021-2024 Ford Bronco models.

Level the stance of your sixth-generation Bronco with the BMR Suspension 2-inch Leveling Kit. This kit is engineered to eliminate the aggressive factory rake, providing a more balanced profile and the necessary clearance for upsized wheel and tire combinations without compromising factory ride quality. Designed to bolt directly to the factory front struts, these spacers maintain original suspension geometry for predictable handling on and off the trail.

• Provides 2 inches of front lift for a level, aggressive stance
• Heavy-duty steel construction for maximum durability under load
• Durable Black Hammertone powdercoat finish for superior corrosion resistance
• Maintains factory ride quality and steering characteristics
• Simple bolt-on installation using factory mounting points
• Manufacturer Part Number: LLK1861H

Fits 2003-2008 Mitsubishi Lancer Evolution, including GSR, MR, RS, and SE submodels.

Restore suspension precision and eliminate unwanted geometry changes with the Whiteline W0590 Rear Upper Control Arm bushing kit. Designed to replace the high-compliance factory rubber bushings at the inner front position of the rear upper arm, this kit utilizes Whiteline's advanced synthetic elastomer formulation. This material provides superior resistance to oil, grease, ozone, and extreme weather conditions while maintaining consistent alignment and predictable handling under heavy cornering loads.

• Direct replacement for worn OE bushings to improve suspension response and chassis feedback.
• Advanced synthetic elastomer formulation resists degradation from oil and environmental exposure.
• Protective plating on all metal components acts as a durable skin to resist corrosion in harsh conditions.
• Specifically engineered for the rear upper control arm (inner front position).
• Maintains critical alignment settings by reducing bushing deflection.
• Manufacturer Part Number: W0590

Fits select 1992-2005 Lexus GS300, GS400, IS300 (Base/Sportcross), SC300, and SC400.

Replace worn factory rubber components with the SuperPro SPF2786K Lower Rear Inner Toe Control Arm Bushing Set. Engineered from a proprietary engineering-grade polyurethane formula, these bushings provide a precise fit and superior durability compared to OE alternatives. By reducing deflection in the rear suspension, this set maintains correct steering geometry and alignment settings under load, leading to more predictable handling, increased safety, and improved tire wear.

• Proprietary polyurethane formula resistant to extreme temperatures, oils, and coolants
• Maintains critical alignment settings and improves steering response
• A quieter, longer-lasting alternative to standard rubber bushings
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF2786K
• Includes Lifetime Warranty

Fits 1986-1992 Toyota Supra Base and Turbo models.

The SuperPro SPF1576K kit is an engineering-grade upgrade for your Toyota Supra's front suspension. Factory rubber bushings often flex under load or degrade over time, leading to dynamic changes in wheel alignment that compromise handling and accelerate tire wear. This kit replaces those soft components with high-performance polyurethane to maintain precise suspension geometry in all driving conditions.

Constructed from SuperPro's proprietary polyurethane formula, these bushings are engineered to be quieter and longer-lasting than traditional rubber. They are resistant to extreme temperatures as well as common automotive fluids including oil, water, and coolant. This kit provides a significant improvement in steering response and chassis stability without the harshness often associated with inferior materials.

• Replaces worn OE front upper inner control arm bushings
• Maintains consistent wheel alignment for better handling and tire life
• Resistant to oils, coolant, and environmental contaminants
• Proprietary engineering-grade polyurethane formula
• Designed, engineered, and manufactured in Australia
• Manufacturer Part Number: SPF1576K
• Lifetime Warranty

Fits select 1990-2007 Subaru Impreza, Legacy, and Outback models.

The SuperPro Anti-Lift/Caster kit is a comprehensive chassis upgrade designed to replace the failure-prone fluid-filled rear mount bushing on the front lower control arms. This assembly addresses a common wear point while simultaneously optimizing suspension geometry. By integrating additional positive caster and anti-lift geometry, this kit significantly enhances front-end cornering grip, steering precision, and tactile feedback.

Constructed from SuperPro's proprietary engineering-grade polyurethane, these bushings are designed to outperform traditional rubber. The material remains unaffected by extreme temperatures, oils, water, or coolant, ensuring consistent performance and a longer service life under demanding conditions.

• Optimized Geometry: Increases positive caster and improves anti-lift characteristics for superior handling.
• Premium Polyurethane: Proprietary formula provides a quieter, longer-lasting alternative to OE rubber components.
• Direct Replacement: Replaces the rear mount bushing on the front lower control arm with precision-engineered brackets.
• Durability: Resistant to oils, water, and chemicals; engineered and manufactured in Australia.
• Manufacturer Part Number: ALOY1388AK
• Warranty: Backed by a Lifetime Warranty.

Fits 2004-2006 Pontiac GTO Base. This Pedders front radius rod-to-chassis bushing is engineered as a heavy-duty replacement for the factory component, specifically designed to address common steering instability and braking feedback issues on the GTO chassis. Unlike standard replacements, this unit features a shim-adjustable design, allowing for precise caster correction to optimize suspension geometry and tire contact patches.

Developed through rigorous real-world testing, these bushings bridge the gap between factory comfort and track-ready performance. The heavy-duty rubber construction provides the durability required for spirited driving while maintaining the NVH (noise, vibration, and harshness) characteristics necessary for a daily driver.

• Direct OE Replacement: Designed to bolt directly into the factory mounting points for a precise fit.
• Heavy-Duty Construction: Built to withstand higher loads than original equipment rubber.
• Caster Correction: Integrated shim-adjustable design allows for fine-tuning of front-end alignment.
• Improved Handling: Reduces radius rod deflection under braking and cornering for more predictable steering response.
• Part Number: PED-5892

Fits 2004-2006 Pontiac GTO Base models.

The Pedders Front Radius Rod Rear Bushing is a direct-replacement suspension component designed to restore the steering response and braking stability of your vehicle. By identifying and addressing the inherent weaknesses in the original equipment (OE) suspension, Pedders engineered this rubber bushing to provide a balance between performance handling and daily-driver civility. This component replaces the worn rear bushing on the front radius rod, ensuring the front suspension maintains proper geometry under load.

• Precision-engineered rubber construction for effective vibration damping and noise isolation
• Direct fitment to factory mounting points for a straightforward installation
• Designed to correct OE suspension movement and restore chassis stability
• Engineered as part of an integrated suspension solution for the GTO chassis
• Manufacturer Part Number: PED-5843

Fits 1993-2002 Mitsubishi Mirage (DE, ES, LS, S).

Worn front control arm bushings significantly degrade vehicle stability, steering precision, and braking efficiency. The Whiteline Plus Front Lower Inner Rear Control Arm Bushing Kit (W52662) replaces soft or degraded OE bushings with advanced synthetic elastomer components. This kit is engineered to provide superior elasticity, memory, and durability across all driving conditions, from daily commuting to performance applications.

• Advanced Synthetic Elastomer: Formulated for resistance to oil, grease, ozone, and weathering to ensure a long service life.
• Internal Grease Reservoirs: Features a self-lubricating design for optimal friction management and silent operation.
• Corrosion Protection: Metal components feature a protective plating tougher than conventional paint for superior weather resistance.
• Installation Ready: Supplied with extreme pressure molybdenum disulphide (LM) based grease and a detailed install guide.
• High-Load Strength: Specially bonded design provides the optimized strength required in high load-bearing suspension points.
• Manufacturer Part Number: W52662

Fits 1990-1995 Toyota 4Runner SR5 (2WD/4WD).

The Energy Suspension Hyper-Flex Master Bushing Set (8.18103R) is a comprehensive solution for restoring the handling and stability of your Toyota 4Runner. Over time, factory rubber bushings become soft, crack, and deteriorate from exposure to road salt, engine oils, and UV rays, leading to sloppy steering and inconsistent alignment. This kit replaces those worn components with high-performance polyurethane that is significantly more durable and resistant to environmental contaminants.

By upgrading to the Hyper-Flex system, you maintain proper caster and camber alignment even under heavy loads or aggressive driving conditions. This results in sharper steering response, reduced wheel hop during quick acceleration, and improved braking control through better suspension geometry stability.

• Precision-molded for 1990-1995 4Runner SR5 chassis models
• Hyper-Flex performance polyurethane resists degradation from oil, coolant, and UV exposure
• Maintains suspension alignment for consistent handling and even tire wear
• Reduces wheel hop and improves overall braking stability
• Proudly Made in America
• Manufacturer Part Number: 8.18103R
• Color: Red

Fits 2011-2014 Ford Mustang Base, GT, Boss 302, and Shelby GT500.

Improve your Mustang's handling and suspension response by replacing compliant factory rubber with Energy Suspension Hyper-Flex polyurethane rear sway bar bushings. These 24mm bushings are engineered to minimize deflection, allowing your rear sway bar to work at its maximum efficiency during cornering and weight transfer. Unlike OEM rubber, Hyper-Flex polyurethane is resistant to road contaminants, oils, and ozone, ensuring a much longer service life without cracking or rotting.

• Direct replacement for compliant 24mm factory rubber bushings
• High-performance Hyper-Flex polyurethane construction
• Resists road chemicals and atmospheric degradation
• Reduces sway bar deflection for more predictable handling
• Manufacturer Part Number: 4.5195R
• Color: Red
• Bore Diameter: 24mm

Fits select 1987-2000 Chevrolet and GMC K1500, K2500, K3500 trucks and V-Series Suburban and Chassis-Cab models.

Replace soft, failure-prone factory rubber mounts with the Energy Suspension Hyper-Flex polyurethane motor and transmission mount kit. Designed to handle high-horsepower applications, these mounts provide a more rigid connection between the drivetrain and the frame, reducing engine torque movement and improving overall power delivery. The proprietary polyurethane formula is engineered to outlast standard rubber, resisting degradation from oil, road salt, and weather.

This kit features a corrosion-resistant zinc finish on the mounting hardware for long-term durability in harsh undercar environments. By stabilizing the engine and transmission, these mounts help prevent drivetrain misalignment and protect other critical components from excessive vibration.

• Manufacturer Part Number: 3.1131R
• Material: Hyper-Flex Polyurethane
• Finish: Zinc-Plated Steel
• Color: Red
• Application: Motor and Transmission Mount Set
• Resistant to automotive fluids and environmental contaminants
• Designed for high-torque and high-performance use