Fits 1984-1996 Chevrolet Corvette models, including Base, ZR-1, Grand Sport, Collector's Edition, and Indianapolis 500 Pace Car.

Whiteline front control arm bushings are engineered to replace soft or deteriorated factory rubber units, significantly improving vehicle stability, handling precision, and braking control. These bushings maintain consistent suspension geometry and wheel alignment during high-load cornering and hard braking, eliminating the deflection common in aging OE components. Constructed from high-grade elastomers, the Whiteline W56419 kit is designed to synchronize your Corvette's suspension system for more predictable performance on the street or track.

• Direct replacement for upper and lower front control arm bushings
• Improves steering response and chassis feedback
• High-quality elastomer construction for optimal safety and durability
• Supplied with extreme pressure molybdenum disulphide (LM) based grease
• Backed by a limited lifetime warranty
• Manufacturer Part Number: W56419

Fits select 2005-2021 Nissan Frontier, 2005-2012 Nissan Pathfinder, and 2009-2012 Suzuki Equator. Whiteline steering rack mount bushings are engineered to restore steering precision and driver feedback that is often lost to worn or soft factory rubber mounts.

Modern steering systems face increased loading from power steering pressure, aggressive wheel alignments, and wider tire profiles. These Whiteline bushings use a specialized synthetic elastomer formulation to resist engine bay contaminants such as oil and grease, as well as ozone and environmental weathering. The internal grease reservoirs provide continual self-lubrication for optimum friction management and long-term durability.

• Part Number: W13391
• Material: Oil and grease resistant synthetic elastomer
• Improves steering response and rack stability
• Internal grease reservoirs for self-lubrication
• Kit Contains: 5 Bushings and 2 Grease Tubes

Fits select 2003-2009 Lexus GX470, Toyota 4Runner, and FJ Cruiser.

The SuperPro TRC120LCAADJ offset bushing and camber pin kit is the definitive solution for correcting alignment geometry on lifted vehicles or during a complete front-end overhaul. This kit replaces the standard front lower control arm inner bushings with offset polyurethane versions, providing the expanded camber and caster adjustability required to compensate for suspension lifts or to complement aftermarket upper control arms.

In addition to the high-performance bushings, this kit includes heavy-duty camber pins for all four lower control arm locations. These HD pins replace factory hardware that is prone to corrosion, damage, or seizing, ensuring smooth and precise adjustments during your next alignment. Engineered from SuperPro's proprietary polyurethane, these components offer a quieter, more durable alternative to OE rubber that remains unaffected by oils, coolant, or extreme temperatures.

• Replaces and upgrades worn or seized factory camber pins and bushings
• Increases adjustment range for precise camber and caster alignment
• Proprietary engineering-grade polyurethane for maximum service life
• Includes SPF4691K (forward bushings), SPF4347K (rearward bushings), and 2x TRC0037 HD Camber Pin Sets
• Designed and manufactured in Australia
• Manufacturer Part Number: TRC120LCAADJ
• Lifetime Warranty

Fits select 2003-2009 Lexus GX470 and Toyota 4Runner/FJ Cruiser models.

The SuperPro TRC120LCA bushing and camber pin kit is a comprehensive solution for overhauling front lower control arms. This kit is designed to replace soft, worn factory rubber bushings with proprietary engineering-grade polyurethane, which provides superior steering response and suspension geometry retention. Unlike rubber, these bushings are unaffected by oils, water, or extreme temperatures, ensuring long-term durability in harsh off-road or daily driving conditions.

A critical feature of this kit is the inclusion of four heavy-duty camber pins. These high-strength components replace factory hardware that is notoriously prone to seizing or corroding in place, which often makes alignment adjustments impossible. Whether you are installing new arms or refreshing your current set, this kit provides everything needed to restore and improve front-end handling.

• Manufacturer Part Number: TRC120LCA
• Includes 1x SPF4690K Forward Bushing Kit and 1x SPF4346K Rearward Bushing Kit
• Includes 2x TRC0037 Heavy-Duty Camber Pin Sets (4 pins total)
• Material: Proprietary Engineering-Grade Polyurethane
• Resistant to oils, coolant, and environmental contaminants
• Designed, engineered, and manufactured in Australia
• Limited Lifetime Warranty

Fits 1969-1991 Alfa Romeo Spider models including Base, Graduate, Quadrifoglio, and Veloce.

The SuperPro SPF2653K Front Transmission Mount Supplement Washer Kit is an essential upgrade for stabilizing the drivetrain and improving the responsiveness of your classic Alfa Romeo. These supplement washers are engineered to work with the factory mounting points, providing a more secure interface than standard rubber components. Manufactured from SuperPro's proprietary engineering-grade polyurethane, this kit is designed to withstand extreme temperatures and remains unaffected by exposure to oils, water, or coolant.

• Proprietary polyurethane formula offers superior durability and quieter operation than traditional rubber
• Reduces unwanted movement for enhanced handling and performance
• Engineered to maintain steering and drivetrain geometry
• Designed and manufactured in Australia with over 40 years of specialized suspension experience
• Resistant to environmental contaminants including oils and road chemicals
• Includes a Lifetime Warranty
• Manufacturer Part Number: SPF2653K

Fits 1967-1974 Holden Torana.

The SuperPro SPF1925K Front Lower Control Arm Inner Bushing Kit is a precision-engineered solution for restoring suspension geometry and steering response. Factory rubber bushings are prone to deflection and degradation over time, leading to dynamic wheel alignment changes that accelerate tire wear and compromise handling. These polyurethane replacements stabilize the inner pivot point of the lower control arms, ensuring the arm moves through its intended arc without unwanted lateral or longitudinal deflection.

Designed and tested in Australia to withstand harsh road conditions, this kit eliminates common suspension clunks and vibrations. By maintaining a consistent contact patch, these bushings improve cornering grip and provide more predictable feedback through the steering wheel. This kit is a direct-fit upgrade for enthusiasts looking to refresh a classic chassis with modern material technology.

• Maintains accurate wheel alignment for extended tire life and improved grip
• Replaces soft or perished OE rubber bushings at the inner control arm pivot
• Resistant to oils, road chemicals, and extreme temperatures
• Restores factory-fresh suspension feel and eliminates steering vagueness
• Manufacturer Part Number: SPF1925K
• Backed by SuperPro's Limited Lifetime Warranty

Fits 1986-1992 Toyota Supra Base and Turbo models.

SuperPro front lower inner control arm bushings are engineered to stabilize arm movement and maintain precise suspension geometry under load. Factory rubber bushings are prone to deflection and degradation over time, leading to dynamic alignment changes that compromise handling and accelerate tire wear. This SPF1443K kit provides a high-performance replacement that restores steering response and chassis stability.

Constructed from SuperPro's proprietary engineering-grade polyurethane, these bushings offer a superior alternative to standard rubber. The material is specifically formulated to remain unaffected by extreme temperatures, engine oils, water, or coolant, ensuring consistent performance in harsh environments. Designed and manufactured in Australia, this kit is an essential upgrade for maintaining the handling characteristics of the A70 chassis.

• Replaces worn OE bushings to maintain correct wheel alignment
• Made from proprietary engineering-grade polyurethane formula
• High resistance to oils, chemicals, and environmental contaminants
• Designed, engineered, and manufactured in Australia
• Includes manufacturer's Lifetime Warranty
• Manufacturer Part Number: SPF1443K

Fits 1970-1973 Triumph Stag Base.

The SuperPro SPF0137-90K Lower Control Arm Inner Bushing is a high-performance replacement for the factory rubber components that often soften and perish over time. Designed specifically for the front suspension of the Triumph Stag, this bushing restores steering precision and maintains proper wheel alignment by reducing excessive control arm movement during cornering and braking.

• Replaces worn OE rubber bushings to eliminate play in the front suspension
• Engineered from proprietary polyurethane for increased durability and chemical resistance
• Maintains consistent suspension geometry under high-load driving conditions
• Direct-fit design for the inner lower control arm mounting point
• Manufacturer Part Number: SPF0137-90K

Fits select 2005-2021 Nissan Frontier, 2005-2015 Nissan Xterra, and 2009-2012 Suzuki Equator.

The SuperPro Rear Leaf Spring and Shackle Bushing Kit (KIT141K) is designed to restore stability and handling precision to your vehicle's rear suspension. Leaf spring bushings are critical for controlling the movement of the rear axle; when factory bushings become worn, soft, or damaged, they allow the solid rear axle to shift independently of the chassis. This movement often manifests as a "wandering" sensation on the road or "passive steer" from the rear end, which becomes significantly more dangerous when the vehicle is under heavy braking or carrying heavy loads such as trailers, boats, or RVs.

By upgrading to this SuperPro kit, you eliminate excessive axle play and ensure the suspension maintains its intended geometry. This kit is a vital upgrade for any 4WD seeing heavy use or towing duties, providing a more predictable and stable driving experience.

• Eliminates rear end wandering and passive steer
• Improves vehicle stability during heavy braking and towing
• Stabilizes the rear axle by replacing worn or inferior factory bushings
• Includes bushings for both the rear leaf springs and shackles
• Manufacturer Part Number: KIT141K

Fits select 1988-2001 Acura Integra, Honda Civic, Civic del Sol, and CRX models.

Restore precise handling and eliminate unwanted rear-end movement with the Prothane Rear Trailing Arm Bushing Kit. Over time, factory rubber bushings degrade, dry-rot, and tear, leading to excessive deflection and unpredictable "rear-end steer" during cornering. These high-performance polyurethane replacements provide the necessary rigidity to maintain suspension geometry under load, ensuring consistent alignment for street or track use.

• Replaces soft, worn, or torn factory rear trailing arm bushings
• Maintains rear suspension geometry and alignment stability
• High-durometer polyurethane construction for superior durability
• Resistant to road oils, chemicals, and environmental ozone
• Color: Red
• Manufacturer Part Number: 8-304

Fits 1988-2000 Honda Civic, 1988-1991 CRX, and 1993-1997 Civic del Sol.

The Prothane 8-1602 Shifter Stabilizer Kit is designed to replace the compliant factory rubber bushings in your Honda's shift linkage. By upgrading to Prothane high-performance polyurethane, you significantly reduce shifter play and slop, resulting in more precise, positive gear engagements during spirited driving and track use.

• Eliminates excessive shifter movement and "mushy" shift feel
• Constructed from high-durometer polyurethane for lasting durability
• Resistant to oil, grease, and environmental contaminants that degrade rubber
• Red finish for easy identification and a custom appearance
• Direct replacement for OE shift linkage bushings
• Manufacturer Part Number: 8-1602

Fits select 1958-1982 Chevrolet models, including Bel Air, Biscayne, C10-C30 Pickup, Camaro, Caprice, Chevelle, Chevy II, Corvette, El Camino, Impala, and Nova.

Replace worn or fluid-soaked rubber engine mounts with Prothane 7-504 polyurethane motor mounts to significantly reduce engine movement and torque loss. These "Type A Short" mounts are engineered to provide the stability required for performance driving while maintaining enough vibration damping for street use. Unlike factory rubber that degrades over time, these high-durometer polyurethane mounts are resistant to oil, grease, and road contaminants.

• Manufacturer Part Number: 7-504
• Configuration: Type A Short
• Material: Premium Red Polyurethane
• Provides superior engine stabilization compared to factory rubber
• Interlocking design for added safety and durability
• Precision fit for classic GM mounting points

Fits 2006-2009 Chevrolet Trailblazer and GMC Envoy models including SS, Denali, EXT, and XL trims.

Restore steering precision and suspension stability with Prothane polyurethane front control arm bushings. Over time, factory rubber bushings degrade, crack, and soften, leading to excessive suspension deflection, uneven tire wear, and a vague steering feel. These high-performance polyurethane replacements are engineered to maintain correct alignment geometry under load, providing a firmer, more responsive driving experience without the maintenance requirements of OEM rubber.

• Replaces soft factory rubber bushings to improve handling and steering response
• Polyurethane construction is resistant to oil, grease, road salt, and environmental debris
• Maintains consistent alignment settings for improved tire longevity
• Durable black finish for a discreet, professional appearance
• Specifically designed for the GMT360 platform control arms
• Manufacturer Part Number: 7-242-BL

Fits 2000-2005 Toyota Celica GT and GTS models.

The Energy Suspension Hyper-Flex Master Bushing Set (8.18106R) is a comprehensive suspension upgrade designed to replace aging, soft rubber bushings with high-performance polyurethane. This kit addresses common suspension deflection issues, helping to maintain proper caster and camber alignment during hard cornering and braking. Unlike OEM rubber, Energy's proprietary Hyper-Flex polyurethane formula is impervious to undercar contaminants like oil, coolant, and road salt, while also resisting UV degradation and atmospheric pollutants.

By installing this master set, you effectively restore the vehicle's handling precision and reduce wheel hop during rapid acceleration. These components provide a more stable suspension platform, ensuring better control and more consistent braking performance on the street or track.

• Replaces soft, worn-out rubber with durable Hyper-Flex performance polyurethane
• Maintains critical alignment geometry for improved handling and control
• Highly resistant to oils, coolants, and environmental elements
• Reduces wheel hop and improves braking stability
• Made in the USA
• Manufacturer Part Number: 8.18106R
• Color: Red

Fits 2001-2005 Lexus IS300 Base and Sportcross.

The Energy Suspension 8.1107R Rear Differential Bushing Set is engineered to replace soft, factory-installed rubber bushings that degrade over time. By upgrading to Energy Suspension's proprietary Hyper-Flex polyurethane, you minimize unwanted differential movement (deflection) during acceleration and shifting. This results in more efficient power transfer to the wheels and a more connected feel under load.

Polyurethane offers significant advantages over OE rubber, as it is much more resistant to road salt, oil leaks, and ozone. This set ensures your IS300 maintains proper driveline alignment even under spirited driving conditions. These bushings are a direct-fit solution designed for longevity and performance.

• Proprietary Hyper-Flex polyurethane construction for superior durability
• Reduces differential housing movement for improved power delivery
• Resistant to automotive fluids and environmental degradation
• Replaces compliant factory rubber components
• Finish: Red
• Manufacturer Part Number: 8.1107R

Fits 1997-2004 Dodge Dakota and 1998-2003 Dodge Durango.

The Energy Suspension Hyper-Flex Front Control Arm Bushing Set is engineered to replace soft, factory-installed rubber bushings that degrade over time. By upgrading to high-performance polyurethane, you eliminate the excessive deflection and alignment shifts caused by rubber distortion. This results in sharper steering response, more predictable cornering, and improved overall vehicle control on the street, track, or off-road.

This kit features a full-floating, non-binding design that ensures the control arms pivot smoothly throughout their suspension travel. Unlike rubber, the Hyper-Flex polyurethane material is highly resistant to engine oils, road contaminants, and atmospheric conditions, ensuring a long-lasting performance upgrade for your chassis.

• Manufacturer Part Number: 5.3139G
• Material: Proprietary Hyper-Flex Polyurethane
• Finish: Black
• Design: Full-floating and non-binding for smooth operation
• Benefit: Maintains precise alignment under high-stress conditions
• Installation: Designed to fit into existing stock control arms

Fits 1984-1987 Honda Civic and CRX models (Base, DX, Si, HF, and 1500 S). This Energy Suspension Hyper-Flex Master Bushing Set is a comprehensive upgrade designed to replace soft, degraded factory rubber with high-performance polyurethane for sharper handling and improved chassis feedback.

The red Hyper-Flex polyurethane formula is engineered to withstand the harsh environment of the vehicle undercarriage. Unlike rubber, these components are impervious to oils, coolants, and UV exposure, ensuring they won't rot or lose their Shore hardness over time. This kit effectively maintains proper caster and camber alignment during aggressive cornering, reduces wheel hop during acceleration, and provides more stable braking performance.

• Replaces worn OEM rubber with durable Hyper-Flex polyurethane
• Maintains consistent suspension geometry and alignment
• Resistant to oils, coolants, road salt, and atmospheric pollutants
• Reduces wheel hop and improves steering response
• Outlasts standard rubber bushings by up to 5 times
• Proudly Made in America
• Manufacturer Part Number: 16.18101R

Fits select 1975-1979 Ford F-150, F-250, and F-350 2WD models.

Restore the structural integrity and cab alignment of your classic Ford truck with this Prothane polyurethane body mount kit. Factory rubber mounts are prone to cracking, rotting, and compressing over decades of use, leading to misaligned body panels, sagging doors, and increased cabin vibration. These high-performance polyurethane bushings are engineered to maintain their shape and provide a firm, stable connection between the body and the frame.

The Prothane 6-110 kit is designed to resist oil, road salt, and environmental degradation that destroys OE rubber. These mounts ensure your truck stays properly leveled, preserving critical clearances and improving overall handling feel by reducing excess body movement.

• Replaces soft, worn-out factory rubber body mounts
• Maintains proper body-to-frame alignment for consistent panel gaps
• Red material offers a custom look beneath the chassis
• Resistant to automotive fluids and road grime
• Specifically engineered for 2WD F-Series applications
• Manufacturer Part Number: 6-110

Fits 1984-2006 Jeep Cherokee (XJ), Grand Cherokee (ZJ), and Wrangler (TJ/LJ). This Rugged Ridge Heavy Duty Steering Kit is a bolt-on solution designed to prevent bent tie rods and steering failure during off-road use with larger tire setups. By utilizing true DOM (Drawn Over Mandrel) tubing with no seams or welds, this kit provides "one ton" strength using 1-1/4 inch OD steel with a 1/4 inch wall thickness.

• Robust Construction: 1-1/4 inch OD cold-rolled steel tubing with a 1/4 inch wall thickness for superior rigidity.
• Heavy-Duty Components: Includes 7/8 inch rod ends with standard tapered ends to fit factory steering knuckles without modification.
• Complete Package: Includes the drag link, tie rod, tie rod ends, and a steering damper to improve handling and reduce vibration.
• Fitment Notes: Recommended for vehicles with 2 to 4 inches of suspension lift. Not compatible with factory Rubicon wheels, small OEM steel wheels, or wheels with deep backspacing.
• Manufacturer Part Number: 18050.88

Fits 1997-2004 Chevrolet Corvette C5 (Base, 50th Anniversary Edition, and Pace Car models).

Restore precision to your C5 Corvette's rear suspension with Prothane Rear Control Arm Bushings. Factory rubber bushings are prone to deflection, cracking, and deterioration over time, leading to sloppy handling and unpredictable alignment changes under load. This kit replaces those soft OE components with high-performance polyurethane, providing the rigidity needed to maintain suspension geometry during aggressive cornering and acceleration.

Prothane polyurethane is engineered to withstand automotive fluids, road salt, and environmental debris that typically destroy rubber. By minimizing unwanted movement in the control arms, these bushings deliver more direct steering feedback and a more connected feel to the road without the harshness of solid metal bearings.

• Replaces worn factory rubber with durable black polyurethane
• Maintains precise rear suspension alignment under heavy loads
• Resistant to oils, grease, and road contaminants
• Designed for 1997-2004 Corvette C5 applications
• Manufacturer Part Number: 7-316-BL

Fits 1967-1972 Chevrolet C10 pickup trucks.

Standard factory rubber body mounts are prone to cracking, rotting, and compressing over decades of use, often resulting in cab sag, door misalignment, and unwanted vibration. The Prothane 7-101 Body Mount Kit addresses these issues by replacing soft OEM bushings with high-performance red polyurethane. This material provides the necessary stiffness to maintain proper body-to-frame alignment while remaining resilient enough to absorb road noise and harmonics.

• Precision-engineered to restore and maintain factory body height and panel alignment
• High-grade red polyurethane construction resists oil, grease, and environmental degradation
• Provides a firmer, more stable connection compared to deteriorating rubber mounts
• Includes the necessary bushings for a complete body-to-frame refresh
• Manufacturer Part Number: 7-101

Fits select 1964-1969 American Motors American, AMX, Javelin, and Rambler models.

Restore the precision of your classic AMC front suspension with the Prothane 1-210-BL Trunnion and Pivot Bushing kit. Original factory rubber bushings are prone to cracking and compression set, leading to inconsistent alignment and degraded steering response. This kit replaces those soft components with high-performance black polyurethane to ensure a more stable and responsive driving experience without the harshness of solid bearings.

• Precision-engineered for 1964-1969 AMC chassis applications
• Constructed from high-grade black polyurethane for maximum durability
• Resistant to degradation from road oils, salt, and environmental contaminants
• Maintains tighter tolerances than OEM rubber for improved handling and alignment stability
• Manufacturer Part Number: 1-210-BL

Fits 2001-2005 Lexus IS300 Base and Sportcross models.

Restore steering precision and suspension geometry with the Energy Suspension Hyper-Flex Rear Control Arm Bushing Set. Factory rubber bushings are prone to drying out and cracking, leading to excessive deflection and alignment changes. This Red polyurethane set replaces those soft components with a more durable, performance-oriented material that maintains proper alignment under extreme conditions on the street or track.

Energy Suspension's proprietary Hyper-Flex polyurethane is engineered to outlast standard rubber while providing superior resistance to road salt, oil, and ozone. The full-floating and non-binding design allows for smoother suspension articulation, resulting in improved cornering, better vehicle control, and more predictable handling.

• Material: Energy Suspension proprietary Red Hyper-Flex polyurethane
• Design: Full-floating and non-binding for efficient operation
• Fitment: Designed to install into the remaining stock control arms
• Durability: Superior resistance to environmental contaminants compared to OE rubber
• Includes: Rear control arm bushing set and required hardware
• Manufacturer Part Number: 8.3140R

Fits 1995-2004 Toyota Tacoma (Base, Limited, Pre Runner, and SR5).

Replace worn-out factory rubber bushings with this Energy Suspension Front Control Arm Bushing Set to restore steering precision and vehicle control. Manufactured from Energy's signature Hyper-Flex performance polyurethane, these bushings are designed to withstand the rigors of the street, track, and off-road environments without the degradation common to original equipment components.

Unlike bonded rubber bushings, these polyurethane replacements are full-floating and non-binding. This design allows the control arms to pivot smoothly through their range of motion, ensuring more efficient suspension operation and preventing the alignment changes that occur under heavy loads or aggressive cornering.

• Maintains proper wheel alignment during extreme driving conditions
• Engineered from durable Hyper-Flex performance polyurethane
• Full-floating and non-binding design for smoother suspension travel
• Replaces original equipment bushings in the stock control arms
• Red finish for a high-performance look
• Manufacturer Part Number: 8.3115R

This Energy Suspension Hyper-Flex Master Bushing Set fits 1977-1979 Ford F-150 4WD models, including Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, and XLT trims. This comprehensive kit (MPN 4.18107R) replaces worn, factory rubber bushings with high-performance polyurethane to restore steering precision and suspension stability.

Unlike original equipment rubber that dry-rots and degrades when exposed to road oils, coolants, and UV rays, the Hyper-Flex polyurethane formula is chemically resistant and engineered to maintain its shape under heavy loads. This set is designed to improve handling by maintaining proper caster and camber alignment while significantly reducing wheel hop during hard acceleration and improving braking control.

• Replaces soft, degraded OE rubber bushings to restore suspension geometry
• Reduces wheel hop and improves overall vehicle handling and control
• Manufactured from Hyper-Flex performance polyurethane for long-term durability
• Resistant to under-car chemicals, road oils, and atmospheric pollutants
• Proudly Made in America
• Manufacturer Part Number: 4.18107R
• Color: Red

Fits 1997-2006 Jeep Wrangler (TJ) models including SE, Sport, Sahara, Rubicon, X, and Unlimited.

Replace worn, soft rubber components with the Energy Suspension Hyper-Flex front control arm bushing set to restore steering precision and suspension stability. Constructed from high-performance polyurethane, these bushings maintain proper alignment under the extreme stresses of off-roading or daily street driving. Unlike rubber that degrades over time, this Hyper-Flex material is resistant to vehicle fluids and road contaminants, ensuring a longer service life and more consistent handling.

The full-floating, non-binding design allows for smoother suspension articulation. This kit is specifically designed for a press-fit installation that requires you to retain and reuse your original factory outer metal shells.

• Manufacturer Part Number: 2.3106R
• Material: Hyper-Flex Performance Polyurethane
• Color: Red
• Application: Front Control Arm Bushings
• Improves cornering, handling, and overall vehicle control
• Maintains better alignment during suspension travel
• Note: Must reuse original OEM outer metal shells

Fits select 2005-2014 Subaru Forester, Impreza, Legacy, WRX, and XV Crosstrek models. This Energy Suspension Front Control Arm Bushing Set (19.3102G) is designed to replace soft, factory rubber bushings that are prone to deflection and premature failure under load.

Manufactured from Energy's proprietary Hyper-Flex polyurethane, these bushings are significantly more durable than OEM rubber. They maintain precise suspension geometry and wheel alignment during aggressive cornering, heavy braking, and off-road use. The full-floating, non-binding design allows the control arm to pivot more efficiently, resulting in sharper steering response and improved overall vehicle control.

• Part Type: Front Control Arm Bushing Set
• Material: Hyper-Flex Performance Polyurethane
• Color: Black
• Manufacturer Part Number: 19.3102G
• Maintains proper alignment under extreme street and track conditions
• Resistant to road oils, chemicals, and ozone
• Outlasts and outperforms traditional rubber components

Fits 1999-2000 Honda Civic Si.

Improve your suspension response and control with the Energy Suspension Hyper-Flex front shock bushing set. Engineered to replace soft or deteriorated original equipment rubber, these red polyurethane bushings provide superior durability and more consistent shock efficiency under high-load conditions. Whether used for competition or street restoration, these bushings offer the precision needed for immediate handling feedback.

• Manufactured from Energy Suspension's proprietary Hyper-Flex performance polyurethane
• Significantly reduces deflection for more immediate suspension response and control
• Resistant to road salt, oils, and other common environmental contaminants
• Designed to fit factory mounting points for a direct-replacement installation
• Complete set for the front shocks
• Manufacturer Part Number: 16.8111R

Fits 1990-1993 Acura Integra GS, GS-R, LS, and RS models.

Replace sloppy, worn-out rubber components with the Energy Suspension Hyper-Flex Master Bushing Set. This comprehensive kit uses high-durometer polyurethane to provide a significant upgrade over factory bushings, which often perish from age and exposure. By maintaining proper caster and camber alignment under load, these bushings deliver more precise handling, better suspension stability, and improved braking control.

The Hyper-Flex polyurethane material is engineered to be impervious to common undercar contaminants like oil and coolant, while also resisting UV-induced deterioration and atmospheric pollutants. This ensures the components will not rot or lose their physical properties like standard OE rubber. Whether you are daily driving or hitting the track, this set reduces wheel hop during quick acceleration and keeps your suspension geometry consistent.

• Complete Master Bushing Set in Red
• High-performance Hyper-Flex polyurethane construction
• Maintains critical alignment settings for better tire wear and control
• Resistant to oils, chemicals, and environmental degradation
• Includes all necessary bushings for a full suspension refresh
• Manufacturer Part Number: 16.18104R

Fits 1979-1985 Mazda RX-7 GS, GSL, GSL-SE, Limited Edition, and S models.

The factory rubber strut rod bushings on the first-generation Mazda RX-7 are prone to excessive deflection, which leads to wheel roll-under during abrupt stops and inconsistent caster geometry under load. Energy Suspension Hyper-Flex polyurethane bushings replace these soft, short-lived OE components to provide a more stable front-end feel and better maintain proper alignment during aggressive driving and hard braking.

• Replaces soft factory rubber with performance-grade Hyper-Flex polyurethane
• Reduces wheel roll-under and improves braking stability
• Better maintains wheel alignment geometry under extreme conditions
• Resists breakdown from oils, road salt, and environmental contaminants
• Engineered for a precise fit on factory strut rod mounting points
• Manufacturer Part Number: 11.7101G